[linux.git] / arch / arm / mach-pxa / am300epd.c

/*
 * am300epd.c -- Platform device for AM300 EPD kit
 *
 * Copyright (C) 2008, Jaya Kumar
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License. See the file COPYING in the main directory of this archive for
 * more details.
 *
 * This work was made possible by help and equipment support from E-Ink
 * Corporation. http://support.eink.com/community
 *
 * This driver is written to be used with the Broadsheet display controller.
 * on the AM300 EPD prototype kit/development kit with an E-Ink 800x600
 * Vizplex EPD on a Gumstix board using the Broadsheet interface board.
 *
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/gpio.h>

#include <mach/gumstix.h>
#include <mach/mfp-pxa25x.h>
#include <linux/platform_data/video-pxafb.h>

#include "generic.h"

#include <video/broadsheetfb.h>

static unsigned int panel_type = 6;
static struct platform_device *am300_device;
static struct broadsheet_board am300_board;

static unsigned long am300_pin_config[] __initdata = {
	GPIO16_GPIO,
	GPIO17_GPIO,
	GPIO32_GPIO,
	GPIO48_GPIO,
	GPIO49_GPIO,
	GPIO51_GPIO,
	GPIO74_GPIO,
	GPIO75_GPIO,
	GPIO76_GPIO,
	GPIO77_GPIO,

	/* this is the 16-bit hdb bus 58-73 */
	GPIO58_GPIO,
	GPIO59_GPIO,
	GPIO60_GPIO,
	GPIO61_GPIO,

	GPIO62_GPIO,
	GPIO63_GPIO,
	GPIO64_GPIO,
	GPIO65_GPIO,

	GPIO66_GPIO,
	GPIO67_GPIO,
	GPIO68_GPIO,
	GPIO69_GPIO,

	GPIO70_GPIO,
	GPIO71_GPIO,
	GPIO72_GPIO,
	GPIO73_GPIO,
};

/* register offsets for gpio control */
#define PWR_GPIO_PIN	16
#define CFG_GPIO_PIN	17
#define RDY_GPIO_PIN	32
#define DC_GPIO_PIN	48
#define RST_GPIO_PIN	49
#define LED_GPIO_PIN	51
#define RD_GPIO_PIN	74
#define WR_GPIO_PIN	75
#define CS_GPIO_PIN	76
#define IRQ_GPIO_PIN	77

/* hdb bus */
#define DB0_GPIO_PIN	58
#define DB15_GPIO_PIN	73

static int gpios[] = { PWR_GPIO_PIN, CFG_GPIO_PIN, RDY_GPIO_PIN, DC_GPIO_PIN,
			RST_GPIO_PIN, RD_GPIO_PIN, WR_GPIO_PIN, CS_GPIO_PIN,
			IRQ_GPIO_PIN, LED_GPIO_PIN };
static char *gpio_names[] = { "PWR", "CFG", "RDY", "DC", "RST", "RD", "WR",
				"CS", "IRQ", "LED" };

static int am300_wait_event(struct broadsheetfb_par *par)
{
	/* todo: improve err recovery */
	wait_event(par->waitq, gpio_get_value(RDY_GPIO_PIN));
	return 0;
}

static int am300_init_gpio_regs(struct broadsheetfb_par *par)
{
	int i;
	int err;
	char dbname[8];

	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
		err = gpio_request(gpios[i], gpio_names[i]);
		if (err) {
			dev_err(&am300_device->dev, "failed requesting "
				"gpio %s, err=%d\n", gpio_names[i], err);
			goto err_req_gpio;
		}
	}

	/* we also need to take care of the hdb bus */
	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++) {
		sprintf(dbname, "DB%d", i);
		err = gpio_request(i, dbname);
		if (err) {
			dev_err(&am300_device->dev, "failed requesting "
				"gpio %d, err=%d\n", i, err);
			goto err_req_gpio2;
		}
	}

	/* setup the outputs and init values */
	gpio_direction_output(PWR_GPIO_PIN, 0);
	gpio_direction_output(CFG_GPIO_PIN, 1);
	gpio_direction_output(DC_GPIO_PIN, 0);
	gpio_direction_output(RD_GPIO_PIN, 1);
	gpio_direction_output(WR_GPIO_PIN, 1);
	gpio_direction_output(CS_GPIO_PIN, 1);
	gpio_direction_output(RST_GPIO_PIN, 0);

	/* setup the inputs */
	gpio_direction_input(RDY_GPIO_PIN);
	gpio_direction_input(IRQ_GPIO_PIN);

	/* start the hdb bus as an input */
	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
		gpio_direction_output(i, 0);

	/* go into command mode */
	gpio_set_value(CFG_GPIO_PIN, 1);
	gpio_set_value(RST_GPIO_PIN, 0);
	msleep(10);
	gpio_set_value(RST_GPIO_PIN, 1);
	msleep(10);
	am300_wait_event(par);

	return 0;

err_req_gpio2:
	while (--i >= DB0_GPIO_PIN)
		gpio_free(i);
	i = ARRAY_SIZE(gpios);
err_req_gpio:
	while (--i >= 0)
		gpio_free(gpios[i]);

	return err;
}

static int am300_init_board(struct broadsheetfb_par *par)
{
	return am300_init_gpio_regs(par);
}

static void am300_cleanup(struct broadsheetfb_par *par)
{
	int i;

	free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);

	for (i = 0; i < ARRAY_SIZE(gpios); i++)
		gpio_free(gpios[i]);

	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
		gpio_free(i);

}

static u16 am300_get_hdb(struct broadsheetfb_par *par)
{
	u16 res = 0;
	int i;

	for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
		res |= (gpio_get_value(DB0_GPIO_PIN + i)) ? (1 << i) : 0;

	return res;
}

static void am300_set_hdb(struct broadsheetfb_par *par, u16 data)
{
	int i;

	for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
		gpio_set_value(DB0_GPIO_PIN + i, (data >> i) & 0x01);
}


static void am300_set_ctl(struct broadsheetfb_par *par, unsigned char bit,
				u8 state)
{
	switch (bit) {
	case BS_CS:
		gpio_set_value(CS_GPIO_PIN, state);
		break;
	case BS_DC:
		gpio_set_value(DC_GPIO_PIN, state);
		break;
	case BS_WR:
		gpio_set_value(WR_GPIO_PIN, state);
		break;
	}
}

static int am300_get_panel_type(void)
{
	return panel_type;
}

static irqreturn_t am300_handle_irq(int irq, void *dev_id)
{
	struct broadsheetfb_par *par = dev_id;

	wake_up(&par->waitq);
	return IRQ_HANDLED;
}

static int am300_setup_irq(struct fb_info *info)
{
	int ret;
	struct broadsheetfb_par *par = info->par;

	ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am300_handle_irq,
				IRQF_DISABLED|IRQF_TRIGGER_RISING,
				"AM300", par);
	if (ret)
		dev_err(&am300_device->dev, "request_irq failed: %d\n", ret);

	return ret;
}

static struct broadsheet_board am300_board = {
	.owner			= THIS_MODULE,
	.init			= am300_init_board,
	.cleanup		= am300_cleanup,
	.set_hdb		= am300_set_hdb,
	.get_hdb		= am300_get_hdb,
	.set_ctl		= am300_set_ctl,
	.wait_for_rdy		= am300_wait_event,
	.get_panel_type		= am300_get_panel_type,
	.setup_irq		= am300_setup_irq,
};

int __init am300_init(void)
{
	int ret;

	pxa2xx_mfp_config(ARRAY_AND_SIZE(am300_pin_config));

	/* request our platform independent driver */
	request_module("broadsheetfb");

	am300_device = platform_device_alloc("broadsheetfb", -1);
	if (!am300_device)
		return -ENOMEM;

	/* the am300_board that will be seen by broadsheetfb is a copy */
	platform_device_add_data(am300_device, &am300_board,
					sizeof(am300_board));

	ret = platform_device_add(am300_device);

	if (ret) {
		platform_device_put(am300_device);
		return ret;
	}

	return 0;
}

module_param(panel_type, uint, 0);
MODULE_PARM_DESC(panel_type, "Select the panel type: 37, 6, 97");

MODULE_DESCRIPTION("board driver for am300 epd kit");
MODULE_AUTHOR("Jaya Kumar");
MODULE_LICENSE("GPL");
Commit	Line	Data
4ce255c1 JK	1	/*
	2	* am300epd.c -- Platform device for AM300 EPD kit
	3	*
	4	* Copyright (C) 2008, Jaya Kumar
	5	*
	6	* This file is subject to the terms and conditions of the GNU General Public
	7	* License. See the file COPYING in the main directory of this archive for
	8	* more details.
	9	*
	10	* This work was made possible by help and equipment support from E-Ink
	11	* Corporation. http://support.eink.com/community
	12	*
	13	* This driver is written to be used with the Broadsheet display controller.
	14	* on the AM300 EPD prototype kit/development kit with an E-Ink 800x600
	15	* Vizplex EPD on a Gumstix board using the Broadsheet interface board.
	16	*
	17	*/
	18
	19	#include <linux/module.h>
	20	#include <linux/kernel.h>
	21	#include <linux/errno.h>
	22	#include <linux/string.h>
	23	#include <linux/delay.h>
	24	#include <linux/interrupt.h>
	25	#include <linux/fb.h>
	26	#include <linux/init.h>
	27	#include <linux/platform_device.h>
	28	#include <linux/irq.h>
	29	#include <linux/gpio.h>
	30
	31	#include <mach/gumstix.h>
	32	#include <mach/mfp-pxa25x.h>
293b2da1	33	#include <linux/platform_data/video-pxafb.h>
4ce255c1 JK	34
	35	#include "generic.h"
	36
	37	#include <video/broadsheetfb.h>
	38
	39	static unsigned int panel_type = 6;
	40	static struct platform_device *am300_device;
	41	static struct broadsheet_board am300_board;
	42
	43	static unsigned long am300_pin_config[] __initdata = {
	44	GPIO16_GPIO,
	45	GPIO17_GPIO,
	46	GPIO32_GPIO,
	47	GPIO48_GPIO,
	48	GPIO49_GPIO,
	49	GPIO51_GPIO,
	50	GPIO74_GPIO,
	51	GPIO75_GPIO,
	52	GPIO76_GPIO,
	53	GPIO77_GPIO,
	54
	55	/* this is the 16-bit hdb bus 58-73 */
	56	GPIO58_GPIO,
	57	GPIO59_GPIO,
	58	GPIO60_GPIO,
	59	GPIO61_GPIO,
	60
	61	GPIO62_GPIO,
	62	GPIO63_GPIO,
	63	GPIO64_GPIO,
	64	GPIO65_GPIO,
	65
	66	GPIO66_GPIO,
	67	GPIO67_GPIO,
	68	GPIO68_GPIO,
	69	GPIO69_GPIO,
	70
	71	GPIO70_GPIO,
	72	GPIO71_GPIO,
	73	GPIO72_GPIO,
	74	GPIO73_GPIO,
	75	};
	76
	77	/* register offsets for gpio control */
	78	#define PWR_GPIO_PIN 16
	79	#define CFG_GPIO_PIN 17
	80	#define RDY_GPIO_PIN 32
	81	#define DC_GPIO_PIN 48
	82	#define RST_GPIO_PIN 49
	83	#define LED_GPIO_PIN 51
	84	#define RD_GPIO_PIN 74
	85	#define WR_GPIO_PIN 75
	86	#define CS_GPIO_PIN 76
	87	#define IRQ_GPIO_PIN 77
	88
	89	/* hdb bus */
	90	#define DB0_GPIO_PIN 58
	91	#define DB15_GPIO_PIN 73
	92
	93	static int gpios[] = { PWR_GPIO_PIN, CFG_GPIO_PIN, RDY_GPIO_PIN, DC_GPIO_PIN,
	94	RST_GPIO_PIN, RD_GPIO_PIN, WR_GPIO_PIN, CS_GPIO_PIN,
	95	IRQ_GPIO_PIN, LED_GPIO_PIN };
	96	static char *gpio_names[] = { "PWR", "CFG", "RDY", "DC", "RST", "RD", "WR",
	97	"CS", "IRQ", "LED" };
98
99	static int am300_wait_event(struct broadsheetfb_par *par)
100	{
101	/* todo: improve err recovery */
102	wait_event(par->waitq, gpio_get_value(RDY_GPIO_PIN));
103	return 0;
104	}
105
106	static int am300_init_gpio_regs(struct broadsheetfb_par *par)
107	{
108	int i;
109	int err;
110	char dbname[8];
111
112	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
113	err = gpio_request(gpios[i], gpio_names[i]);
114	if (err) {
115	dev_err(&am300_device->dev, "failed requesting "
116	"gpio %s, err=%d\n", gpio_names[i], err);
117	goto err_req_gpio;
118	}
119	}
120
121	/* we also need to take care of the hdb bus */
122	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++) {
123	sprintf(dbname, "DB%d", i);
124	err = gpio_request(i, dbname);
125	if (err) {
126	dev_err(&am300_device->dev, "failed requesting "
127	"gpio %d, err=%d\n", i, err);
5898eb79	128	goto err_req_gpio2;
4ce255c1 JK	129	}
	130	}
	131
	132	/* setup the outputs and init values */
	133	gpio_direction_output(PWR_GPIO_PIN, 0);
	134	gpio_direction_output(CFG_GPIO_PIN, 1);
	135	gpio_direction_output(DC_GPIO_PIN, 0);
	136	gpio_direction_output(RD_GPIO_PIN, 1);
	137	gpio_direction_output(WR_GPIO_PIN, 1);
	138	gpio_direction_output(CS_GPIO_PIN, 1);
	139	gpio_direction_output(RST_GPIO_PIN, 0);
	140
	141	/* setup the inputs */
	142	gpio_direction_input(RDY_GPIO_PIN);
	143	gpio_direction_input(IRQ_GPIO_PIN);
	144
	145	/* start the hdb bus as an input */
	146	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
	147	gpio_direction_output(i, 0);
	148
	149	/* go into command mode */
	150	gpio_set_value(CFG_GPIO_PIN, 1);
	151	gpio_set_value(RST_GPIO_PIN, 0);
	152	msleep(10);
	153	gpio_set_value(RST_GPIO_PIN, 1);
	154	msleep(10);
	155	am300_wait_event(par);
	156
	157	return 0;
	158
5898eb79 AL	159	err_req_gpio2:
	160	while (--i >= DB0_GPIO_PIN)
	161	gpio_free(i);
	162	i = ARRAY_SIZE(gpios);
4ce255c1	163	err_req_gpio:
5898eb79 AL	164	while (--i >= 0)
5898eb79 AL	165	gpio_free(gpios[i]);
4ce255c1 JK	166
	167	return err;
	168	}
	169
	170	static int am300_init_board(struct broadsheetfb_par *par)
	171	{
	172	return am300_init_gpio_regs(par);
	173	}
	174
	175	static void am300_cleanup(struct broadsheetfb_par *par)
	176	{
	177	int i;
	178
6384fdad	179	free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);
4ce255c1 JK	180
	181	for (i = 0; i < ARRAY_SIZE(gpios); i++)
	182	gpio_free(gpios[i]);
	183
	184	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
	185	gpio_free(i);
	186
	187	}
	188
	189	static u16 am300_get_hdb(struct broadsheetfb_par *par)
	190	{
	191	u16 res = 0;
	192	int i;
	193
	194	for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
	195	res \|= (gpio_get_value(DB0_GPIO_PIN + i)) ? (1 << i) : 0;
	196
	197	return res;
	198	}
	199
	200	static void am300_set_hdb(struct broadsheetfb_par *par, u16 data)
	201	{
	202	int i;
	203
	204	for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
	205	gpio_set_value(DB0_GPIO_PIN + i, (data >> i) & 0x01);
	206	}
	207
	208
	209	static void am300_set_ctl(struct broadsheetfb_par *par, unsigned char bit,
	210	u8 state)
	211	{
	212	switch (bit) {
	213	case BS_CS:
	214	gpio_set_value(CS_GPIO_PIN, state);
	215	break;
	216	case BS_DC:
	217	gpio_set_value(DC_GPIO_PIN, state);
	218	break;
	219	case BS_WR:
	220	gpio_set_value(WR_GPIO_PIN, state);
	221	break;
	222	}
	223	}
	224
	225	static int am300_get_panel_type(void)
	226	{
	227	return panel_type;
	228	}
	229
	230	static irqreturn_t am300_handle_irq(int irq, void *dev_id)
	231	{
	232	struct broadsheetfb_par *par = dev_id;
	233
	234	wake_up(&par->waitq);
	235	return IRQ_HANDLED;
	236	}
	237
	238	static int am300_setup_irq(struct fb_info *info)
	239	{
	240	int ret;
	241	struct broadsheetfb_par *par = info->par;
	242
6384fdad	243	ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am300_handle_irq,
4ce255c1 JK	244	IRQF_DISABLED\|IRQF_TRIGGER_RISING,
	245	"AM300", par);
	246	if (ret)
	247	dev_err(&am300_device->dev, "request_irq failed: %d\n", ret);
	248
	249	return ret;
	250	}
	251
	252	static struct broadsheet_board am300_board = {
	253	.owner = THIS_MODULE,
	254	.init = am300_init_board,
	255	.cleanup = am300_cleanup,
	256	.set_hdb = am300_set_hdb,
	257	.get_hdb = am300_get_hdb,
	258	.set_ctl = am300_set_ctl,
	259	.wait_for_rdy = am300_wait_event,
	260	.get_panel_type = am300_get_panel_type,
	261	.setup_irq = am300_setup_irq,
	262	};
	263
	264	int __init am300_init(void)
	265	{
	266	int ret;
	267
	268	pxa2xx_mfp_config(ARRAY_AND_SIZE(am300_pin_config));
	269
	270	/* request our platform independent driver */
	271	request_module("broadsheetfb");
	272
	273	am300_device = platform_device_alloc("broadsheetfb", -1);
	274	if (!am300_device)
	275	return -ENOMEM;
	276
	277	/* the am300_board that will be seen by broadsheetfb is a copy */
	278	platform_device_add_data(am300_device, &am300_board,
	279	sizeof(am300_board));
	280
	281	ret = platform_device_add(am300_device);
	282
	283	if (ret) {
	284	platform_device_put(am300_device);
	285	return ret;
	286	}
	287
	288	return 0;
	289	}
	290
	291	module_param(panel_type, uint, 0);
c1c341a0	292	MODULE_PARM_DESC(panel_type, "Select the panel type: 37, 6, 97");
4ce255c1 JK	293
	294	MODULE_DESCRIPTION("board driver for am300 epd kit");
	295	MODULE_AUTHOR("Jaya Kumar");
	296	MODULE_LICENSE("GPL");