[linux.git] / drivers / power / Kconfig

menuconfig POWER_SUPPLY
	bool "Power supply class support"
	help
	  Say Y here to enable power supply class support. This allows
	  power supply (batteries, AC, USB) monitoring by userspace
	  via sysfs and uevent (if available) and/or APM kernel interface
	  (if selected below).

if POWER_SUPPLY

config POWER_SUPPLY_DEBUG
	bool "Power supply debug"
	help
	  Say Y here to enable debugging messages for power supply class
	  and drivers.

config PDA_POWER
	tristate "Generic PDA/phone power driver"
	depends on !S390
	help
	  Say Y here to enable generic power driver for PDAs and phones with
	  one or two external power supplies (AC/USB) connected to main and
	  backup batteries, and optional builtin charger.

config APM_POWER
	tristate "APM emulation for class batteries"
	depends on APM_EMULATION
	help
	  Say Y here to enable support APM status emulation using
	  battery class devices.

config GENERIC_ADC_BATTERY
	tristate "Generic battery support using IIO"
	depends on IIO
	help
	  Say Y here to enable support for the generic battery driver
	  which uses IIO framework to read adc.

config MAX8925_POWER
	tristate "MAX8925 battery charger support"
	depends on MFD_MAX8925
	help
	  Say Y here to enable support for the battery charger in the Maxim
	  MAX8925 PMIC.

config WM831X_BACKUP
	tristate "WM831X backup battery charger support"
	depends on MFD_WM831X
	help
	  Say Y here to enable support for the backup battery charger
	  in the Wolfson Microelectronics WM831x PMICs.

config WM831X_POWER
	tristate "WM831X PMU support"
	depends on MFD_WM831X
	help
	  Say Y here to enable support for the power management unit
	  provided by Wolfson Microelectronics WM831x PMICs.

config WM8350_POWER
        tristate "WM8350 PMU support"
        depends on MFD_WM8350
        help
          Say Y here to enable support for the power management unit
	  provided by the Wolfson Microelectronics WM8350 PMIC.

config TEST_POWER
	tristate "Test power driver"
	help
	  This driver is used for testing. It's safe to say M here.

config BATTERY_88PM860X
	tristate "Marvell 88PM860x battery driver"
	depends on MFD_88PM860X
	help
	  Say Y here to enable battery monitor for Marvell 88PM860x chip.

config BATTERY_DS2760
	tristate "DS2760 battery driver (HP iPAQ & others)"
	depends on W1 && W1_SLAVE_DS2760
	help
	  Say Y here to enable support for batteries with ds2760 chip.

config BATTERY_DS2780
	tristate "DS2780 battery driver"
	depends on HAS_IOMEM
	select W1
	select W1_SLAVE_DS2780
	help
	  Say Y here to enable support for batteries with ds2780 chip.

config BATTERY_DS2781
	tristate "DS2781 battery driver"
	depends on HAS_IOMEM
	select W1
	select W1_SLAVE_DS2781
	help
	  If you enable this you will have the DS2781 battery driver support.

	  The battery monitor chip is used in many batteries/devices
	  as the one who is responsible for charging/discharging/monitoring
	  Li+ batteries.

	  If you are unsure, say N.

config BATTERY_DS2782
	tristate "DS2782/DS2786 standalone gas-gauge"
	depends on I2C
	help
	  Say Y here to enable support for the DS2782/DS2786 standalone battery
	  gas-gauge.

config BATTERY_PMU
	tristate "Apple PMU battery"
	depends on PPC32 && ADB_PMU
	help
	  Say Y here to expose battery information on Apple machines
	  through the generic battery class.

config BATTERY_OLPC
	tristate "One Laptop Per Child battery"
	depends on X86_32 && OLPC
	help
	  Say Y to enable support for the battery on the OLPC laptop.

config BATTERY_TOSA
	tristate "Sharp SL-6000 (tosa) battery"
	depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
	help
	  Say Y to enable support for the battery on the Sharp Zaurus
	  SL-6000 (tosa) models.

config BATTERY_COLLIE
	tristate "Sharp SL-5500 (collie) battery"
	depends on SA1100_COLLIE && MCP_UCB1200
	help
	  Say Y to enable support for the battery on the Sharp Zaurus
	  SL-5500 (collie) models.

config BATTERY_WM97XX
	bool "WM97xx generic battery driver"
	depends on TOUCHSCREEN_WM97XX=y
	help
	  Say Y to enable support for battery measured by WM97xx aux port.

config BATTERY_SBS
        tristate "SBS Compliant gas gauge"
        depends on I2C
        help
	  Say Y to include support for SBS battery driver for SBS-compliant
	  gas gauges.

config BATTERY_BQ27x00
	tristate "BQ27x00 battery driver"
	depends on I2C || I2C=n
	help
	  Say Y here to enable support for batteries with BQ27x00 (I2C/HDQ) chips.

config BATTERY_BQ27X00_I2C
	bool "BQ27200/BQ27500 support"
	depends on BATTERY_BQ27x00
	depends on I2C
	default y
	help
	  Say Y here to enable support for batteries with BQ27x00 (I2C) chips.

config BATTERY_BQ27X00_PLATFORM
	bool "BQ27000 support"
	depends on BATTERY_BQ27x00
	default y
	help
	  Say Y here to enable support for batteries with BQ27000 (HDQ) chips.

config BATTERY_DA9030
	tristate "DA9030 battery driver"
	depends on PMIC_DA903X
	help
	  Say Y here to enable support for batteries charger integrated into
	  DA9030 PMIC.

config BATTERY_DA9052
	tristate "Dialog DA9052 Battery"
	depends on PMIC_DA9052
	help
	  Say Y here to enable support for batteries charger integrated into
	  DA9052 PMIC.

config BATTERY_MAX17040
	tristate "Maxim MAX17040 Fuel Gauge"
	depends on I2C
	help
	  MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
	  in handheld and portable equipment. The MAX17040 is configured
	  to operate with a single lithium cell

config BATTERY_MAX17042
	tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
	depends on I2C
	help
	  MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
	  in handheld and portable equipment. The MAX17042 is configured
	  to operate with a single lithium cell. MAX8997 and MAX8966 are
	  multi-function devices that include fuel gauages that are compatible
	  with MAX17042. This driver also supports max17047/50 chips which are
	  improved version of max17042.

config BATTERY_Z2
	tristate "Z2 battery driver"
	depends on I2C && MACH_ZIPIT2
	help
	  Say Y to include support for the battery on the Zipit Z2.

config BATTERY_S3C_ADC
	tristate "Battery driver for Samsung ADC based monitoring"
	depends on S3C_ADC
	help
	  Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery

config CHARGER_88PM860X
	tristate "Marvell 88PM860x Charger driver"
	depends on MFD_88PM860X && BATTERY_88PM860X
	help
	  Say Y here to enable charger for Marvell 88PM860x chip.

config CHARGER_PCF50633
	tristate "NXP PCF50633 MBC"
	depends on MFD_PCF50633
	help
	 Say Y to include support for NXP PCF50633 Main Battery Charger.

config BATTERY_JZ4740
	tristate "Ingenic JZ4740 battery"
	depends on MACH_JZ4740
	depends on MFD_JZ4740_ADC
	help
	  Say Y to enable support for the battery on Ingenic JZ4740 based
	  boards.

	  This driver can be build as a module. If so, the module will be
	  called jz4740-battery.

config BATTERY_INTEL_MID
	tristate "Battery driver for Intel MID platforms"
	depends on INTEL_SCU_IPC && SPI
	help
	  Say Y here to enable the battery driver on Intel MID
	  platforms.

config BATTERY_RX51
	tristate "Nokia RX-51 (N900) battery driver"
	depends on TWL4030_MADC
	help
	  Say Y here to enable support for battery information on Nokia
	  RX-51, also known as N900 tablet.

config CHARGER_ISP1704
	tristate "ISP1704 USB Charger Detection"
	depends on USB_PHY
	help
	  Say Y to enable support for USB Charger Detection with
	  ISP1707/ISP1704 USB transceivers.

config CHARGER_MAX8903
	tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
	depends on GENERIC_HARDIRQS
	help
	  Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
	  The driver supports controlling charger-enable and current-limit
	  pins based on the status of charger connections with interrupt
	  handlers.

config CHARGER_TWL4030
	tristate "OMAP TWL4030 BCI charger driver"
	depends on TWL4030_CORE
	help
	  Say Y here to enable support for TWL4030 Battery Charge Interface.

config CHARGER_LP8727
	tristate "TI/National Semiconductor LP8727 charger driver"
	depends on I2C
	help
	  Say Y here to enable support for LP8727 Charger Driver.

config CHARGER_LP8788
	tristate "TI LP8788 charger driver"
	depends on MFD_LP8788
	depends on LP8788_ADC
	depends on IIO
	help
	  Say Y to enable support for the LP8788 linear charger.

config CHARGER_GPIO
	tristate "GPIO charger"
	depends on GPIOLIB
	help
	  Say Y to include support for chargers which report their online status
	  through a GPIO pin.

	  This driver can be build as a module. If so, the module will be
	  called gpio-charger.

config CHARGER_MANAGER
	bool "Battery charger manager for multiple chargers"
	depends on REGULATOR && RTC_CLASS
	select EXTCON
	help
          Say Y to enable charger-manager support, which allows multiple
          chargers attached to a battery and multiple batteries attached to a
          system. The charger-manager also can monitor charging status in
          runtime and in suspend-to-RAM by waking up the system periodically
          with help of suspend_again support.

config CHARGER_MAX8997
	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
	depends on MFD_MAX8997 && REGULATOR_MAX8997
	help
	  Say Y to enable support for the battery charger control sysfs and
	  platform data of MAX8997/LP3974 PMICs.

config CHARGER_MAX8998
	tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
	depends on MFD_MAX8998 && REGULATOR_MAX8998
	help
	  Say Y to enable support for the battery charger control sysfs and
	  platform data of MAX8998/LP3974 PMICs.

config CHARGER_BQ2415X
	tristate "TI BQ2415x battery charger driver"
	depends on I2C
	help
	  Say Y to enable support for the TI BQ2415x battery charger
	  PMICs.

	  You'll need this driver to charge batteries on e.g. Nokia
	  RX-51/N900.

config CHARGER_SMB347
	tristate "Summit Microelectronics SMB347 Battery Charger"
	depends on I2C
	select REGMAP_I2C
	help
	  Say Y to include support for Summit Microelectronics SMB347
	  Battery Charger.

config CHARGER_TPS65090
	tristate "TPS65090 battery charger driver"
	depends on MFD_TPS65090
	help
	 Say Y here to enable support for battery charging with TPS65090
	 PMIC chips.

config AB8500_BM
	bool "AB8500 Battery Management Driver"
	depends on AB8500_CORE && AB8500_GPADC
	help
	  Say Y to include support for AB8500 battery management.

config BATTERY_GOLDFISH
	tristate "Goldfish battery driver"
	depends on GENERIC_HARDIRQS
	help
	  Say Y to enable support for the battery and AC power in the
	  Goldfish emulator.

source "drivers/power/reset/Kconfig"

endif # POWER_SUPPLY

source "drivers/power/avs/Kconfig"
Commit	Line	Data
4a11b59d	1	menuconfig POWER_SUPPLY
0d4ed4e2	2	bool "Power supply class support"
4a11b59d AV	3	help
	4	Say Y here to enable power supply class support. This allows
	5	power supply (batteries, AC, USB) monitoring by userspace
	6	via sysfs and uevent (if available) and/or APM kernel interface
	7	(if selected below).
	8
	9	if POWER_SUPPLY
	10
	11	config POWER_SUPPLY_DEBUG
	12	bool "Power supply debug"
	13	help
	14	Say Y here to enable debugging messages for power supply class
	15	and drivers.
	16
b2998049 AV	17	config PDA_POWER
b2998049 AV	18	tristate "Generic PDA/phone power driver"
5f17c70f	19	depends on !S390
b2998049 AV	20	help
	21	Say Y here to enable generic power driver for PDAs and phones with
	22	one or two external power supplies (AC/USB) connected to main and
	23	backup batteries, and optional builtin charger.
	24
3788ec93 AV	25	config APM_POWER
	26	tristate "APM emulation for class batteries"
	27	depends on APM_EMULATION
	28	help
	29	Say Y here to enable support APM status emulation using
	30	battery class devices.
	31
e60fea79	32	config GENERIC_ADC_BATTERY
	33	tristate "Generic battery support using IIO"
	34	depends on IIO
	35	help
	36	Say Y here to enable support for the generic battery driver
	37	which uses IIO framework to read adc.
	38
28db3888 HZ	39	config MAX8925_POWER
	40	tristate "MAX8925 battery charger support"
	41	depends on MFD_MAX8925
	42	help
	43	Say Y here to enable support for the battery charger in the Maxim
	44	MAX8925 PMIC.
	45
c26964ea MB	46	config WM831X_BACKUP
	47	tristate "WM831X backup battery charger support"
	48	depends on MFD_WM831X
	49	help
	50	Say Y here to enable support for the backup battery charger
	51	in the Wolfson Microelectronics WM831x PMICs.
	52
3961f7c3 MB	53	config WM831X_POWER
	54	tristate "WM831X PMU support"
	55	depends on MFD_WM831X
	56	help
	57	Say Y here to enable support for the power management unit
	58	provided by Wolfson Microelectronics WM831x PMICs.
	59
14431aa0 MB	60	config WM8350_POWER
	61	tristate "WM8350 PMU support"
	62	depends on MFD_WM8350
	63	help
	64	Say Y here to enable support for the power management unit
	65	provided by the Wolfson Microelectronics WM8350 PMIC.
	66
a1e50fd4 AV	67	config TEST_POWER
	68	tristate "Test power driver"
	69	help
	70	This driver is used for testing. It's safe to say M here.
	71
a830d28b JZ	72	config BATTERY_88PM860X
	73	tristate "Marvell 88PM860x battery driver"
	74	depends on MFD_88PM860X
	75	help
	76	Say Y here to enable battery monitor for Marvell 88PM860x chip.
	77
fe0e3153 AV	78	config BATTERY_DS2760
fe0e3153 AV	79	tristate "DS2760 battery driver (HP iPAQ & others)"
f6127b86	80	depends on W1 && W1_SLAVE_DS2760
fe0e3153 AV	81	help
	82	Say Y here to enable support for batteries with ds2760 chip.
	83
275ac746 CB	84	config BATTERY_DS2780
275ac746 CB	85	tristate "DS2780 battery driver"
3369465e	86	depends on HAS_IOMEM
275ac746 CB	87	select W1
	88	select W1_SLAVE_DS2780
	89	help
	90	Say Y here to enable support for batteries with ds2780 chip.
	91
fef37e9a	92	config BATTERY_DS2781
840b91bd	93	tristate "DS2781 battery driver"
fef37e9a RS	94	depends on HAS_IOMEM
	95	select W1
	96	select W1_SLAVE_DS2781
	97	help
	98	If you enable this you will have the DS2781 battery driver support.
	99
	100	The battery monitor chip is used in many batteries/devices
	101	as the one who is responsible for charging/discharging/monitoring
	102	Li+ batteries.
	103
	104	If you are unsure, say N.
	105
bfdb46ce	106	config BATTERY_DS2782
9b9ade6b	107	tristate "DS2782/DS2786 standalone gas-gauge"
bfdb46ce RM	108	depends on I2C
bfdb46ce RM	109	help
9b9ade6b	110	Say Y here to enable support for the DS2782/DS2786 standalone battery
bfdb46ce RM	111	gas-gauge.
bfdb46ce RM	112
efea58e3 DW	113	config BATTERY_PMU
efea58e3 DW	114	tristate "Apple PMU battery"
a1da5f4f	115	depends on PPC32 && ADB_PMU
efea58e3 DW	116	help
	117	Say Y here to expose battery information on Apple machines
	118	through the generic battery class.
	119
fb972873 DW	120	config BATTERY_OLPC
	121	tristate "One Laptop Per Child battery"
	122	depends on X86_32 && OLPC
	123	help
	124	Say Y to enable support for the battery on the OLPC laptop.
	125
fece4184 DB	126	config BATTERY_TOSA
fece4184 DB	127	tristate "Sharp SL-6000 (tosa) battery"
6a903788	128	depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
fece4184 DB	129	help
	130	Say Y to enable support for the battery on the Sharp Zaurus
	131	SL-6000 (tosa) models.
	132
f1fce597 TK	133	config BATTERY_COLLIE
	134	tristate "Sharp SL-5500 (collie) battery"
	135	depends on SA1100_COLLIE && MCP_UCB1200
	136	help
	137	Say Y to enable support for the battery on the Sharp Zaurus
	138	SL-5500 (collie) models.
	139
4e9687d9 MV	140	config BATTERY_WM97XX
4e9687d9 MV	141	bool "WM97xx generic battery driver"
5e4c5f4c	142	depends on TOUCHSCREEN_WM97XX=y
d4b19c42	143	help
4e9687d9	144	Say Y to enable support for battery measured by WM97xx aux port.
d4b19c42	145
c78f2b64 RK	146	config BATTERY_SBS
c78f2b64 RK	147	tristate "SBS Compliant gas gauge"
a7640bfa RK	148	depends on I2C
a7640bfa RK	149	help
c78f2b64 RK	150	Say Y to include support for SBS battery driver for SBS-compliant
c78f2b64 RK	151	gas gauges.
a7640bfa	152
b996ad0e	153	config BATTERY_BQ27x00
e20908d9	154	tristate "BQ27x00 battery driver"
a2d0dbb4	155	depends on I2C \|\| I2C=n
7fb7ba58 LPC	156	help
	157	Say Y here to enable support for batteries with BQ27x00 (I2C/HDQ) chips.
	158
	159	config BATTERY_BQ27X00_I2C
	160	bool "BQ27200/BQ27500 support"
	161	depends on BATTERY_BQ27x00
b996ad0e	162	depends on I2C
7fb7ba58	163	default y
b996ad0e	164	help
e20908d9	165	Say Y here to enable support for batteries with BQ27x00 (I2C) chips.
b996ad0e	166
7fb7ba58 LPC	167	config BATTERY_BQ27X00_PLATFORM
	168	bool "BQ27000 support"
	169	depends on BATTERY_BQ27x00
	170	default y
	171	help
	172	Say Y here to enable support for batteries with BQ27000 (HDQ) chips.
	173
342d765e MR	174	config BATTERY_DA9030
	175	tristate "DA9030 battery driver"
	176	depends on PMIC_DA903X
	177	help
	178	Say Y here to enable support for batteries charger integrated into
	179	DA9030 PMIC.
	180
ded7fc7b AJ	181	config BATTERY_DA9052
	182	tristate "Dialog DA9052 Battery"
	183	depends on PMIC_DA9052
	184	help
	185	Say Y here to enable support for batteries charger integrated into
	186	DA9052 PMIC.
	187
c6f4a42d MK	188	config BATTERY_MAX17040
	189	tristate "Maxim MAX17040 Fuel Gauge"
	190	depends on I2C
	191	help
	192	MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
	193	in handheld and portable equipment. The MAX17040 is configured
	194	to operate with a single lithium cell
	195
359ab9f5	196	config BATTERY_MAX17042
9a8422d2	197	tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
359ab9f5 MH	198	depends on I2C
	199	help
	200	MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
	201	in handheld and portable equipment. The MAX17042 is configured
	202	to operate with a single lithium cell. MAX8997 and MAX8966 are
	203	multi-function devices that include fuel gauages that are compatible
9a8422d2 RP	204	with MAX17042. This driver also supports max17047/50 chips which are
9a8422d2 RP	205	improved version of max17042.
359ab9f5	206
e3e8d1c9 MV	207	config BATTERY_Z2
	208	tristate "Z2 battery driver"
	209	depends on I2C && MACH_ZIPIT2
	210	help
	211	Say Y to include support for the battery on the Zipit Z2.
	212
808be4b2 VK	213	config BATTERY_S3C_ADC
	214	tristate "Battery driver for Samsung ADC based monitoring"
	215	depends on S3C_ADC
	216	help
	217	Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
	218
a830d28b JZ	219	config CHARGER_88PM860X
	220	tristate "Marvell 88PM860x Charger driver"
	221	depends on MFD_88PM860X && BATTERY_88PM860X
	222	help
	223	Say Y here to enable charger for Marvell 88PM860x chip.
	224
f5714dc9 BR	225	config CHARGER_PCF50633
	226	tristate "NXP PCF50633 MBC"
	227	depends on MFD_PCF50633
	228	help
	229	Say Y to include support for NXP PCF50633 Main Battery Charger.
	230
f6a21388 LPC	231	config BATTERY_JZ4740
	232	tristate "Ingenic JZ4740 battery"
	233	depends on MACH_JZ4740
	234	depends on MFD_JZ4740_ADC
	235	help
	236	Say Y to enable support for the battery on Ingenic JZ4740 based
	237	boards.
	238
	239	This driver can be build as a module. If so, the module will be
	240	called jz4740-battery.
	241
6721081b NM	242	config BATTERY_INTEL_MID
	243	tristate "Battery driver for Intel MID platforms"
	244	depends on INTEL_SCU_IPC && SPI
	245	help
	246	Say Y here to enable the battery driver on Intel MID
	247	platforms.
	248
04930baf PR	249	config BATTERY_RX51
	250	tristate "Nokia RX-51 (N900) battery driver"
	251	depends on TWL4030_MADC
	252	help
	253	Say Y here to enable support for battery information on Nokia
	254	RX-51, also known as N900 tablet.
	255
ec46475f HK	256	config CHARGER_ISP1704
ec46475f HK	257	tristate "ISP1704 USB Charger Detection"
fd891498	258	depends on USB_PHY
ec46475f HK	259	help
	260	Say Y to enable support for USB Charger Detection with
	261	ISP1707/ISP1704 USB transceivers.
	262
b14a9ccc MH	263	config CHARGER_MAX8903
b14a9ccc MH	264	tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
6f9efe76	265	depends on GENERIC_HARDIRQS
b14a9ccc MH	266	help
	267	Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
	268	The driver supports controlling charger-enable and current-limit
	269	pins based on the status of charger connections with interrupt
	270	handlers.
	271
2e727f17 GI	272	config CHARGER_TWL4030
	273	tristate "OMAP TWL4030 BCI charger driver"
	274	depends on TWL4030_CORE
	275	help
	276	Say Y here to enable support for TWL4030 Battery Charge Interface.
	277
2165c8a4	278	config CHARGER_LP8727
e39b828f	279	tristate "TI/National Semiconductor LP8727 charger driver"
2165c8a4 WK	280	depends on I2C
	281	help
	282	Say Y here to enable support for LP8727 Charger Driver.
	283
98a27664 KM	284	config CHARGER_LP8788
	285	tristate "TI LP8788 charger driver"
	286	depends on MFD_LP8788
	287	depends on LP8788_ADC
237a1b01	288	depends on IIO
98a27664 KM	289	help
	290	Say Y to enable support for the LP8788 linear charger.
	291
5070437c LPC	292	config CHARGER_GPIO
	293	tristate "GPIO charger"
	294	depends on GPIOLIB
	295	help
	296	Say Y to include support for chargers which report their online status
	297	through a GPIO pin.
	298
	299	This driver can be build as a module. If so, the module will be
	300	called gpio-charger.
	301
3bb3dbbd DK	302	config CHARGER_MANAGER
	303	bool "Battery charger manager for multiple chargers"
	304	depends on REGULATOR && RTC_CLASS
c4727555	305	select EXTCON
3bb3dbbd DK	306	help
	307	Say Y to enable charger-manager support, which allows multiple
	308	chargers attached to a battery and multiple batteries attached to a
	309	system. The charger-manager also can monitor charging status in
	310	runtime and in suspend-to-RAM by waking up the system periodically
	311	with help of suspend_again support.
	312
149c077b DK	313	config CHARGER_MAX8997
	314	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
	315	depends on MFD_MAX8997 && REGULATOR_MAX8997
	316	help
	317	Say Y to enable support for the battery charger control sysfs and
	318	platform data of MAX8997/LP3974 PMICs.
	319
bb4ce970 DK	320	config CHARGER_MAX8998
	321	tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
	322	depends on MFD_MAX8998 && REGULATOR_MAX8998
	323	help
	324	Say Y to enable support for the battery charger control sysfs and
	325	platform data of MAX8998/LP3974 PMICs.
	326
7ad85830 AV	327	config CHARGER_BQ2415X
	328	tristate "TI BQ2415x battery charger driver"
	329	depends on I2C
	330	help
	331	Say Y to enable support for the TI BQ2415x battery charger
	332	PMICs.
	333
	334	You'll need this driver to charge batteries on e.g. Nokia
	335	RX-51/N900.
	336
ed1a230f BR	337	config CHARGER_SMB347
	338	tristate "Summit Microelectronics SMB347 Battery Charger"
	339	depends on I2C
34298d40	340	select REGMAP_I2C
ed1a230f BR	341	help
	342	Say Y to include support for Summit Microelectronics SMB347
	343	Battery Charger.
	344
6f8da5df RK	345	config CHARGER_TPS65090
	346	tristate "TPS65090 battery charger driver"
	347	depends on MFD_TPS65090
	348	help
	349	Say Y here to enable support for battery charging with TPS65090
	350	PMIC chips.
	351
1f855824 AM	352	config AB8500_BM
	353	bool "AB8500 Battery Management Driver"
	354	depends on AB8500_CORE && AB8500_GPADC
	355	help
8b7d133c	356	Say Y to include support for AB8500 battery management.
1f855824	357
84d7b768 ML	358	config BATTERY_GOLDFISH
84d7b768 ML	359	tristate "Goldfish battery driver"
049645d7	360	depends on GENERIC_HARDIRQS
84d7b768 ML	361	help
	362	Say Y to enable support for the battery and AC power in the
	363	Goldfish emulator.
	364
96ff0f5c JL	365	source "drivers/power/reset/Kconfig"
96ff0f5c JL	366
4a11b59d	367	endif # POWER_SUPPLY
21ff63ad JP	368
21ff63ad JP	369	source "drivers/power/avs/Kconfig"