]>
Commit | Line | Data |
---|---|---|
2874c5fd | 1 | /* SPDX-License-Identifier: GPL-2.0-or-later */ |
09117362 NA |
2 | /* |
3 | * drivers/net/bond/bond_options.h - bonding options | |
4 | * Copyright (c) 2013 Nikolay Aleksandrov <[email protected]> | |
09117362 NA |
5 | */ |
6 | ||
1ef8019b DM |
7 | #ifndef _NET_BOND_OPTIONS_H |
8 | #define _NET_BOND_OPTIONS_H | |
09117362 NA |
9 | |
10 | #define BOND_OPT_MAX_NAMELEN 32 | |
11 | #define BOND_OPT_VALID(opt) ((opt) < BOND_OPT_LAST) | |
12 | #define BOND_MODE_ALL_EX(x) (~(x)) | |
13 | ||
14 | /* Option flags: | |
15 | * BOND_OPTFLAG_NOSLAVES - check if the bond device is empty before setting | |
16 | * BOND_OPTFLAG_IFDOWN - check if the bond device is down before setting | |
17 | * BOND_OPTFLAG_RAWVAL - the option parses the value itself | |
18 | */ | |
19 | enum { | |
20 | BOND_OPTFLAG_NOSLAVES = BIT(0), | |
21 | BOND_OPTFLAG_IFDOWN = BIT(1), | |
22 | BOND_OPTFLAG_RAWVAL = BIT(2) | |
23 | }; | |
24 | ||
25 | /* Value type flags: | |
26 | * BOND_VALFLAG_DEFAULT - mark the value as default | |
27 | * BOND_VALFLAG_(MIN|MAX) - mark the value as min/max | |
28 | */ | |
29 | enum { | |
30 | BOND_VALFLAG_DEFAULT = BIT(0), | |
31 | BOND_VALFLAG_MIN = BIT(1), | |
32 | BOND_VALFLAG_MAX = BIT(2) | |
33 | }; | |
34 | ||
35 | /* Option IDs, their bit positions correspond to their IDs */ | |
36 | enum { | |
2b3798d5 | 37 | BOND_OPT_MODE, |
aa59d851 | 38 | BOND_OPT_PACKETS_PER_SLAVE, |
a4b32ce7 | 39 | BOND_OPT_XMIT_HASH, |
16228881 | 40 | BOND_OPT_ARP_VALIDATE, |
edf36b24 | 41 | BOND_OPT_ARP_ALL_TARGETS, |
1df6b6aa | 42 | BOND_OPT_FAIL_OVER_MAC, |
7bdb04ed | 43 | BOND_OPT_ARP_INTERVAL, |
4fb0ef58 | 44 | BOND_OPT_ARP_TARGETS, |
25a9b54a | 45 | BOND_OPT_DOWNDELAY, |
e4994612 | 46 | BOND_OPT_UPDELAY, |
d3131de7 | 47 | BOND_OPT_LACP_RATE, |
633ddc9e | 48 | BOND_OPT_MINLINKS, |
9e5f5eeb | 49 | BOND_OPT_AD_SELECT, |
ef56becb | 50 | BOND_OPT_NUM_PEER_NOTIF, |
b98d9c66 | 51 | BOND_OPT_MIIMON, |
180222f0 | 52 | BOND_OPT_PRIMARY, |
388d3a6d | 53 | BOND_OPT_PRIMARY_RESELECT, |
0fff0608 | 54 | BOND_OPT_USE_CARRIER, |
d1fbd3ed | 55 | BOND_OPT_ACTIVE_SLAVE, |
24089ba1 | 56 | BOND_OPT_QUEUE_ID, |
3df01162 | 57 | BOND_OPT_ALL_SLAVES_ACTIVE, |
105c8fb6 | 58 | BOND_OPT_RESEND_IGMP, |
4325b374 | 59 | BOND_OPT_LP_INTERVAL, |
0e2e5b66 | 60 | BOND_OPT_SLAVES, |
e9f0fb88 | 61 | BOND_OPT_TLB_DYNAMIC_LB, |
6791e466 | 62 | BOND_OPT_AD_ACTOR_SYS_PRIO, |
74514957 | 63 | BOND_OPT_AD_ACTOR_SYSTEM, |
d22a5fc0 | 64 | BOND_OPT_AD_USER_PORT_KEY, |
205845a3 | 65 | BOND_OPT_NUM_PEER_NOTIF_ALIAS, |
07a4ddec | 66 | BOND_OPT_PEER_NOTIF_DELAY, |
09117362 NA |
67 | BOND_OPT_LAST |
68 | }; | |
69 | ||
70 | /* This structure is used for storing option values and for passing option | |
71 | * values when changing an option. The logic when used as an arg is as follows: | |
72 | * - if string != NULL -> parse it, if the opt is RAW type then return it, else | |
73 | * return the parse result | |
74 | * - if string == NULL -> parse value | |
75 | */ | |
76 | struct bond_opt_value { | |
77 | char *string; | |
78 | u64 value; | |
79 | u32 flags; | |
80 | }; | |
81 | ||
82 | struct bonding; | |
83 | ||
84 | struct bond_option { | |
85 | int id; | |
f3253339 | 86 | const char *name; |
87 | const char *desc; | |
09117362 NA |
88 | u32 flags; |
89 | ||
90 | /* unsuppmodes is used to denote modes in which the option isn't | |
91 | * supported. | |
92 | */ | |
93 | unsigned long unsuppmodes; | |
94 | /* supported values which this option can have, can be a subset of | |
95 | * BOND_OPTVAL_RANGE's value range | |
96 | */ | |
f3253339 | 97 | const struct bond_opt_value *values; |
09117362 | 98 | |
28f084cc | 99 | int (*set)(struct bonding *bond, const struct bond_opt_value *val); |
09117362 NA |
100 | }; |
101 | ||
102 | int __bond_opt_set(struct bonding *bond, unsigned int option, | |
103 | struct bond_opt_value *val); | |
7a7e96e0 VY |
104 | int __bond_opt_set_notify(struct bonding *bond, unsigned int option, |
105 | struct bond_opt_value *val); | |
09117362 | 106 | int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf); |
28f084cc | 107 | |
f3253339 | 108 | const struct bond_opt_value *bond_opt_parse(const struct bond_option *opt, |
28f084cc | 109 | struct bond_opt_value *val); |
f3253339 | 110 | const struct bond_option *bond_opt_get(unsigned int option); |
dc3e5d18 | 111 | const struct bond_option *bond_opt_get_by_name(const char *name); |
f3253339 | 112 | const struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val); |
09117362 NA |
113 | |
114 | /* This helper is used to initialize a bond_opt_value structure for parameter | |
115 | * passing. There should be either a valid string or value, but not both. | |
116 | * When value is ULLONG_MAX then string will be used. | |
117 | */ | |
118 | static inline void __bond_opt_init(struct bond_opt_value *optval, | |
119 | char *string, u64 value) | |
120 | { | |
121 | memset(optval, 0, sizeof(*optval)); | |
122 | optval->value = ULLONG_MAX; | |
123 | if (value == ULLONG_MAX) | |
124 | optval->string = string; | |
125 | else | |
126 | optval->value = value; | |
127 | } | |
128 | #define bond_opt_initval(optval, value) __bond_opt_init(optval, NULL, value) | |
129 | #define bond_opt_initstr(optval, str) __bond_opt_init(optval, str, ULLONG_MAX) | |
2b3798d5 | 130 | |
4fb0ef58 | 131 | void bond_option_arp_ip_targets_clear(struct bonding *bond); |
f3253339 | 132 | |
1ef8019b | 133 | #endif /* _NET_BOND_OPTIONS_H */ |