[linux.git] / drivers / net / gianfar_mii.c

/*
 * drivers/net/gianfar_mii.c
 *
 * Gianfar Ethernet Driver -- MIIM bus implementation
 * Provides Bus interface for MIIM regs
 *
 * Author: Andy Fleming
 * Maintainer: Kumar Gala
 *
 * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 *
 */

#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/crc32.h>
#include <linux/mii.h>
#include <linux/phy.h>

#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>

#include "gianfar.h"
#include "gianfar_mii.h"

/*
 * Write value to the PHY at mii_id at register regnum,
 * on the bus attached to the local interface, which may be different from the
 * generic mdio bus (tied to a single interface), waiting until the write is
 * done before returning. This is helpful in programming interfaces like
 * the TBI which control interfaces like onchip SERDES and are always tied to
 * the local mdio pins, which may not be the same as system mdio bus, used for
 * controlling the external PHYs, for example.
 */
int gfar_local_mdio_write(struct gfar_mii __iomem *regs, int mii_id,
			  int regnum, u16 value)
{
	/* Set the PHY address and the register address we want to write */
	gfar_write(&regs->miimadd, (mii_id << 8) | regnum);

	/* Write out the value we want */
	gfar_write(&regs->miimcon, value);

	/* Wait for the transaction to finish */
	while (gfar_read(&regs->miimind) & MIIMIND_BUSY)
		cpu_relax();

	return 0;
}

/*
 * Read the bus for PHY at addr mii_id, register regnum, and
 * return the value.  Clears miimcom first.  All PHY operation
 * done on the bus attached to the local interface,
 * which may be different from the generic mdio bus
 * This is helpful in programming interfaces like
 * the TBI which, inturn, control interfaces like onchip SERDES
 * and are always tied to the local mdio pins, which may not be the
 * same as system mdio bus, used for controlling the external PHYs, for eg.
 */
int gfar_local_mdio_read(struct gfar_mii __iomem *regs, int mii_id, int regnum)

{
	u16 value;

	/* Set the PHY address and the register address we want to read */
	gfar_write(&regs->miimadd, (mii_id << 8) | regnum);

	/* Clear miimcom, and then initiate a read */
	gfar_write(&regs->miimcom, 0);
	gfar_write(&regs->miimcom, MII_READ_COMMAND);

	/* Wait for the transaction to finish */
	while (gfar_read(&regs->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
		cpu_relax();

	/* Grab the value of the register from miimstat */
	value = gfar_read(&regs->miimstat);

	return value;
}

/* Write value to the PHY at mii_id at register regnum,
 * on the bus, waiting until the write is done before returning.
 * All PHY configuration is done through the TSEC1 MIIM regs */
int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
{
	struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;

	/* Write to the local MII regs */
	return(gfar_local_mdio_write(regs, mii_id, regnum, value));
}

/* Read the bus for PHY at addr mii_id, register regnum, and
 * return the value.  Clears miimcom first.  All PHY
 * configuration has to be done through the TSEC1 MIIM regs */
int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
{
	struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;

	/* Read the local MII regs */
	return(gfar_local_mdio_read(regs, mii_id, regnum));
}

/* Reset the MIIM registers, and wait for the bus to free */
int gfar_mdio_reset(struct mii_bus *bus)
{
	struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
	unsigned int timeout = PHY_INIT_TIMEOUT;

	mutex_lock(&bus->mdio_lock);

	/* Reset the management interface */
	gfar_write(&regs->miimcfg, MIIMCFG_RESET);

	/* Setup the MII Mgmt clock speed */
	gfar_write(&regs->miimcfg, MIIMCFG_INIT_VALUE);

	/* Wait until the bus is free */
	while ((gfar_read(&regs->miimind) & MIIMIND_BUSY) &&
			timeout--)
		cpu_relax();

	mutex_unlock(&bus->mdio_lock);

	if(timeout <= 0) {
		printk(KERN_ERR "%s: The MII Bus is stuck!\n",
				bus->name);
		return -EBUSY;
	}

	return 0;
}


int gfar_mdio_probe(struct device *dev)
{
	struct platform_device *pdev = to_platform_device(dev);
	struct gianfar_mdio_data *pdata;
	struct gfar_mii __iomem *regs;
	struct mii_bus *new_bus;
	struct resource *r;
	int err = 0;

	if (NULL == dev)
		return -EINVAL;

	new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);

	if (NULL == new_bus)
		return -ENOMEM;

	new_bus->name = "Gianfar MII Bus",
	new_bus->read = &gfar_mdio_read,
	new_bus->write = &gfar_mdio_write,
	new_bus->reset = &gfar_mdio_reset,
	new_bus->id = pdev->id;

	pdata = (struct gianfar_mdio_data *)pdev->dev.platform_data;

	if (NULL == pdata) {
		printk(KERN_ERR "gfar mdio %d: Missing platform data!\n", pdev->id);
		return -ENODEV;
	}

	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);

	/* Set the PHY base address */
	regs = ioremap(r->start, sizeof (struct gfar_mii));

	if (NULL == regs) {
		err = -ENOMEM;
		goto reg_map_fail;
	}

	new_bus->priv = (void __force *)regs;

	new_bus->irq = pdata->irq;

	new_bus->dev = dev;
	dev_set_drvdata(dev, new_bus);

	err = mdiobus_register(new_bus);

	if (0 != err) {
		printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
				new_bus->name);
		goto bus_register_fail;
	}

	return 0;

bus_register_fail:
	iounmap(regs);
reg_map_fail:
	kfree(new_bus);

	return err;
}


int gfar_mdio_remove(struct device *dev)
{
	struct mii_bus *bus = dev_get_drvdata(dev);

	mdiobus_unregister(bus);

	dev_set_drvdata(dev, NULL);

	iounmap((void __iomem *)bus->priv);
	bus->priv = NULL;
	kfree(bus);

	return 0;
}

static struct device_driver gianfar_mdio_driver = {
	.name = "fsl-gianfar_mdio",
	.bus = &platform_bus_type,
	.probe = gfar_mdio_probe,
	.remove = gfar_mdio_remove,
};

int __init gfar_mdio_init(void)
{
	return driver_register(&gianfar_mdio_driver);
}

void gfar_mdio_exit(void)
{
	driver_unregister(&gianfar_mdio_driver);
}
Commit	Line	Data
6aa20a22	1	/*
bb40dcbb AF	2	* drivers/net/gianfar_mii.c
	3	*
	4	* Gianfar Ethernet Driver -- MIIM bus implementation
	5	* Provides Bus interface for MIIM regs
	6	*
	7	* Author: Andy Fleming
4c8d3d99	8	* Maintainer: Kumar Gala
bb40dcbb AF	9	*
	10	* Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
	11	*
	12	* This program is free software; you can redistribute it and/or modify it
	13	* under the terms of the GNU General Public License as published by the
	14	* Free Software Foundation; either version 2 of the License, or (at your
	15	* option) any later version.
	16	*
	17	*/
	18
bb40dcbb	19	#include <linux/kernel.h>
bb40dcbb AF	20	#include <linux/string.h>
	21	#include <linux/errno.h>
	22	#include <linux/unistd.h>
	23	#include <linux/slab.h>
	24	#include <linux/interrupt.h>
	25	#include <linux/init.h>
	26	#include <linux/delay.h>
	27	#include <linux/netdevice.h>
	28	#include <linux/etherdevice.h>
	29	#include <linux/skbuff.h>
	30	#include <linux/spinlock.h>
	31	#include <linux/mm.h>
	32	#include <linux/module.h>
d052d1be	33	#include <linux/platform_device.h>
bb40dcbb AF	34	#include <linux/crc32.h>
	35	#include <linux/mii.h>
	36	#include <linux/phy.h>
	37
	38	#include <asm/io.h>
	39	#include <asm/irq.h>
	40	#include <asm/uaccess.h>
	41
	42	#include "gianfar.h"
	43	#include "gianfar_mii.h"
	44
d3c12873 KJ	45	/*
	46	* Write value to the PHY at mii_id at register regnum,
	47	* on the bus attached to the local interface, which may be different from the
	48	* generic mdio bus (tied to a single interface), waiting until the write is
	49	* done before returning. This is helpful in programming interfaces like
	50	* the TBI which control interfaces like onchip SERDES and are always tied to
	51	* the local mdio pins, which may not be the same as system mdio bus, used for
	52	* controlling the external PHYs, for example.
	53	*/
fdb26629	54	int gfar_local_mdio_write(struct gfar_mii __iomem *regs, int mii_id,
d3c12873	55	int regnum, u16 value)
bb40dcbb	56	{
bb40dcbb AF	57	/* Set the PHY address and the register address we want to write */
	58	gfar_write(&regs->miimadd, (mii_id << 8) \| regnum);
	59
	60	/* Write out the value we want */
	61	gfar_write(&regs->miimcon, value);
	62
	63	/* Wait for the transaction to finish */
	64	while (gfar_read(&regs->miimind) & MIIMIND_BUSY)
	65	cpu_relax();
	66
	67	return 0;
	68	}
	69
d3c12873 KJ	70	/*
	71	* Read the bus for PHY at addr mii_id, register regnum, and
	72	* return the value. Clears miimcom first. All PHY operation
	73	* done on the bus attached to the local interface,
	74	* which may be different from the generic mdio bus
	75	* This is helpful in programming interfaces like
	76	* the TBI which, inturn, control interfaces like onchip SERDES
	77	* and are always tied to the local mdio pins, which may not be the
	78	* same as system mdio bus, used for controlling the external PHYs, for eg.
	79	*/
fdb26629	80	int gfar_local_mdio_read(struct gfar_mii __iomem *regs, int mii_id, int regnum)
d3c12873	81
bb40dcbb	82	{
bb40dcbb AF	83	u16 value;
	84
	85	/* Set the PHY address and the register address we want to read */
	86	gfar_write(&regs->miimadd, (mii_id << 8) \| regnum);
	87
	88	/* Clear miimcom, and then initiate a read */
	89	gfar_write(&regs->miimcom, 0);
	90	gfar_write(&regs->miimcom, MII_READ_COMMAND);
	91
	92	/* Wait for the transaction to finish */
	93	while (gfar_read(&regs->miimind) & (MIIMIND_NOTVALID \| MIIMIND_BUSY))
	94	cpu_relax();
	95
	96	/* Grab the value of the register from miimstat */
	97	value = gfar_read(&regs->miimstat);
	98
	99	return value;
	100	}
	101
d3c12873 KJ	102	/* Write value to the PHY at mii_id at register regnum,
	103	* on the bus, waiting until the write is done before returning.
	104	* All PHY configuration is done through the TSEC1 MIIM regs */
	105	int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
	106	{
	107	struct gfar_mii __iomem regs = (void __iomem )bus->priv;
	108
	109	/* Write to the local MII regs */
	110	return(gfar_local_mdio_write(regs, mii_id, regnum, value));
	111	}
	112
	113	/* Read the bus for PHY at addr mii_id, register regnum, and
	114	* return the value. Clears miimcom first. All PHY
	115	* configuration has to be done through the TSEC1 MIIM regs */
	116	int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
	117	{
	118	struct gfar_mii __iomem regs = (void __iomem )bus->priv;
	119
	120	/* Read the local MII regs */
	121	return(gfar_local_mdio_read(regs, mii_id, regnum));
	122	}
bb40dcbb AF	123
	124	/* Reset the MIIM registers, and wait for the bus to free */
	125	int gfar_mdio_reset(struct mii_bus *bus)
	126	{
cc8c6e37	127	struct gfar_mii __iomem regs = (void __iomem )bus->priv;
bb40dcbb AF	128	unsigned int timeout = PHY_INIT_TIMEOUT;
bb40dcbb AF	129
15cf6dde	130	mutex_lock(&bus->mdio_lock);
bb40dcbb AF	131
	132	/* Reset the management interface */
	133	gfar_write(&regs->miimcfg, MIIMCFG_RESET);
	134
	135	/* Setup the MII Mgmt clock speed */
	136	gfar_write(&regs->miimcfg, MIIMCFG_INIT_VALUE);
	137
	138	/* Wait until the bus is free */
	139	while ((gfar_read(&regs->miimind) & MIIMIND_BUSY) &&
	140	timeout--)
	141	cpu_relax();
	142
15cf6dde	143	mutex_unlock(&bus->mdio_lock);
bb40dcbb AF	144
	145	if(timeout <= 0) {
	146	printk(KERN_ERR "%s: The MII Bus is stuck!\n",
	147	bus->name);
	148	return -EBUSY;
	149	}
	150
	151	return 0;
	152	}
	153
	154
	155	int gfar_mdio_probe(struct device *dev)
	156	{
	157	struct platform_device *pdev = to_platform_device(dev);
	158	struct gianfar_mdio_data *pdata;
cc8c6e37	159	struct gfar_mii __iomem *regs;
bb40dcbb	160	struct mii_bus *new_bus;
1d532677	161	struct resource *r;
bb40dcbb AF	162	int err = 0;
	163
	164	if (NULL == dev)
	165	return -EINVAL;
	166
125d128b	167	new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
bb40dcbb AF	168
	169	if (NULL == new_bus)
	170	return -ENOMEM;
	171
	172	new_bus->name = "Gianfar MII Bus",
	173	new_bus->read = &gfar_mdio_read,
	174	new_bus->write = &gfar_mdio_write,
	175	new_bus->reset = &gfar_mdio_reset,
	176	new_bus->id = pdev->id;
	177
	178	pdata = (struct gianfar_mdio_data *)pdev->dev.platform_data;
	179
	180	if (NULL == pdata) {
	181	printk(KERN_ERR "gfar mdio %d: Missing platform data!\n", pdev->id);
	182	return -ENODEV;
	183	}
	184
1d532677 KG	185	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1d532677 KG	186
bb40dcbb	187	/* Set the PHY base address */
cc8c6e37	188	regs = ioremap(r->start, sizeof (struct gfar_mii));
bb40dcbb AF	189
	190	if (NULL == regs) {
	191	err = -ENOMEM;
	192	goto reg_map_fail;
	193	}
	194
cc8c6e37	195	new_bus->priv = (void __force *)regs;
bb40dcbb AF	196
	197	new_bus->irq = pdata->irq;
	198
	199	new_bus->dev = dev;
	200	dev_set_drvdata(dev, new_bus);
	201
	202	err = mdiobus_register(new_bus);
	203
	204	if (0 != err) {
6aa20a22	205	printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
bb40dcbb AF	206	new_bus->name);
	207	goto bus_register_fail;
	208	}
	209
	210	return 0;
	211
	212	bus_register_fail:
cc8c6e37	213	iounmap(regs);
bb40dcbb AF	214	reg_map_fail:
	215	kfree(new_bus);
	216
	217	return err;
	218	}
	219
	220
	221	int gfar_mdio_remove(struct device *dev)
	222	{
	223	struct mii_bus *bus = dev_get_drvdata(dev);
	224
	225	mdiobus_unregister(bus);
	226
	227	dev_set_drvdata(dev, NULL);
	228
cc8c6e37	229	iounmap((void __iomem *)bus->priv);
bb40dcbb AF	230	bus->priv = NULL;
	231	kfree(bus);
	232
	233	return 0;
	234	}
	235
	236	static struct device_driver gianfar_mdio_driver = {
	237	.name = "fsl-gianfar_mdio",
	238	.bus = &platform_bus_type,
	239	.probe = gfar_mdio_probe,
	240	.remove = gfar_mdio_remove,
	241	};
	242
	243	int __init gfar_mdio_init(void)
	244	{
	245	return driver_register(&gianfar_mdio_driver);
	246	}
	247
b9daf6c0	248	void gfar_mdio_exit(void)
bb40dcbb AF	249	{
	250	driver_unregister(&gianfar_mdio_driver);
	251	}