[linux.git] / drivers / bluetooth / Kconfig


menu "Bluetooth device drivers"
	depends on BT

config BT_HCIBTUSB
	tristate "HCI USB driver"
	depends on USB
	help
	  Bluetooth HCI USB driver.
	  This driver is required if you want to use Bluetooth devices with
	  USB interface.

	  Say Y here to compile support for Bluetooth USB devices into the
	  kernel or say M to compile it as module (btusb).

config BT_HCIBTSDIO
	tristate "HCI SDIO driver"
	depends on MMC
	help
	  Bluetooth HCI SDIO driver.
	  This driver is required if you want to use Bluetooth device with
	  SDIO interface.

	  Say Y here to compile support for Bluetooth SDIO devices into the
	  kernel or say M to compile it as module (btsdio).

config BT_HCIUART
	tristate "HCI UART driver"
	help
	  Bluetooth HCI UART driver.
	  This driver is required if you want to use Bluetooth devices with
	  serial port interface. You will also need this driver if you have 
	  UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card 
	  adapter and BrainBoxes Bluetooth PC Card.

	  Say Y here to compile support for Bluetooth UART devices into the
	  kernel or say M to compile it as module (hci_uart).

config BT_HCIUART_H4
	bool "UART (H4) protocol support"
	depends on BT_HCIUART
	help
	  UART (H4) is serial protocol for communication between Bluetooth 
	  device and host. This protocol is required for most Bluetooth devices 
	  with UART interface, including PCMCIA and CF cards. 

	  Say Y here to compile support for HCI UART (H4) protocol.

config BT_HCIUART_BCSP
	bool "BCSP protocol support"
	depends on BT_HCIUART
	select BITREVERSE
	help
	  BCSP (BlueCore Serial Protocol) is serial protocol for communication 
	  between Bluetooth device and host. This protocol is required for non
	  USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
	  CF cards.

	  Say Y here to compile support for HCI BCSP protocol.

config BT_HCIUART_ATH3K
	bool "Atheros AR300x serial support"
	depends on BT_HCIUART
	help
	  HCIATH3K (HCI Atheros AR300x) is a serial protocol for
	  communication between host and Atheros AR300x Bluetooth devices.
	  This protocol enables AR300x chips to be enabled with
	  power management support.
	  Enable this if you have Atheros AR300x serial Bluetooth device.

	  Say Y here to compile support for HCI UART ATH3K protocol.

config BT_HCIUART_LL
	bool "HCILL protocol support"
	depends on BT_HCIUART
	help
	  HCILL (HCI Low Level) is a serial protocol for communication
	  between Bluetooth device and host. This protocol is required for
	  serial Bluetooth devices that are based on Texas Instruments'
	  BRF chips.

	  Say Y here to compile support for HCILL protocol.

config BT_HCIUART_3WIRE
	bool "Three-wire UART (H5) protocol support"
	depends on BT_HCIUART
	help
	  The HCI Three-wire UART Transport Layer makes it possible to
	  user the Bluetooth HCI over a serial port interface. The HCI
	  Three-wire UART Transport Layer assumes that the UART
	  communication may have bit errors, overrun errors or burst
	  errors and thereby making CTS/RTS lines unnecessary.

	  Say Y here to compile support for Three-wire UART protocol.

config BT_HCIBCM203X
	tristate "HCI BCM203x USB driver"
	depends on USB
	select FW_LOADER
	help
	  Bluetooth HCI BCM203x USB driver.
	  This driver provides the firmware loading mechanism for the Broadcom
	  Blutonium based devices.

	  Say Y here to compile support for HCI BCM203x devices into the
	  kernel or say M to compile it as module (bcm203x).

config BT_HCIBPA10X
	tristate "HCI BPA10x USB driver"
	depends on USB
	help
	  Bluetooth HCI BPA10x USB driver.
	  This driver provides support for the Digianswer BPA 100/105 Bluetooth
	  sniffer devices.

	  Say Y here to compile support for HCI BPA10x devices into the
	  kernel or say M to compile it as module (bpa10x).

config BT_HCIBFUSB
	tristate "HCI BlueFRITZ! USB driver"
	depends on USB
	select FW_LOADER
	help
	  Bluetooth HCI BlueFRITZ! USB driver.
	  This driver provides support for Bluetooth USB devices with AVM
	  interface:
	     AVM BlueFRITZ! USB

	  Say Y here to compile support for HCI BFUSB devices into the
	  kernel or say M to compile it as module (bfusb).

config BT_HCIDTL1
	tristate "HCI DTL1 (PC Card) driver"
	depends on PCMCIA
	help
	  Bluetooth HCI DTL1 (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  Nokia DTL1 interface:
	     Nokia Bluetooth Card
	     Socket Bluetooth CF Card

	  Say Y here to compile support for HCI DTL1 devices into the
	  kernel or say M to compile it as module (dtl1_cs).

config BT_HCIBT3C
	tristate "HCI BT3C (PC Card) driver"
	depends on PCMCIA
	select FW_LOADER
	help
	  Bluetooth HCI BT3C (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  3Com BT3C interface:
	     3Com Bluetooth Card (3CRWB6096)
	     HP Bluetooth Card

	  Say Y here to compile support for HCI BT3C devices into the
	  kernel or say M to compile it as module (bt3c_cs).

config BT_HCIBLUECARD
	tristate "HCI BlueCard (PC Card) driver"
	depends on PCMCIA
	help
	  Bluetooth HCI BlueCard (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  Anycom BlueCard interface:
	     Anycom Bluetooth PC Card
	     Anycom Bluetooth CF Card

	  Say Y here to compile support for HCI BlueCard devices into the
	  kernel or say M to compile it as module (bluecard_cs).

config BT_HCIBTUART
	tristate "HCI UART (PC Card) device driver"
	depends on PCMCIA
	help
	  Bluetooth HCI UART (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  an UART interface:
	     Xircom CreditCard Bluetooth Adapter
	     Xircom RealPort2 Bluetooth Adapter
	     Sphinx PICO Card
	     H-Soft blue+Card
	     Cyber-blue Compact Flash Card

	  Say Y here to compile support for HCI UART devices into the
	  kernel or say M to compile it as module (btuart_cs).

config BT_HCIVHCI
	tristate "HCI VHCI (Virtual HCI device) driver"
	help
	  Bluetooth Virtual HCI device driver.
	  This driver is required if you want to use HCI Emulation software.

	  Say Y here to compile support for virtual HCI devices into the
	  kernel or say M to compile it as module (hci_vhci).

config BT_MRVL
	tristate "Marvell Bluetooth driver support"
	help
	  The core driver to support Marvell Bluetooth devices.

	  This driver is required if you want to support
	  Marvell Bluetooth devices, such as 8688/8787/8797.

	  Say Y here to compile Marvell Bluetooth driver
	  into the kernel or say M to compile it as module.

config BT_MRVL_SDIO
	tristate "Marvell BT-over-SDIO driver"
	depends on BT_MRVL && MMC
	select FW_LOADER
	help
	  The driver for Marvell Bluetooth chipsets with SDIO interface.

	  This driver is required if you want to use Marvell Bluetooth
	  devices with SDIO interface. Currently SD8688/SD8787/SD8797
	  chipsets are supported.

	  Say Y here to compile support for Marvell BT-over-SDIO driver
	  into the kernel or say M to compile it as module.

config BT_ATH3K
	tristate "Atheros firmware download driver"
	depends on BT_HCIBTUSB
	select FW_LOADER
	help
	  Bluetooth firmware download driver.
	  This driver loads the firmware into the Atheros Bluetooth
	  chipset.

	  Say Y here to compile support for "Atheros firmware download driver"
	  into the kernel or say M to compile it as module (ath3k).

config BT_WILINK
	tristate "Texas Instruments WiLink7 driver"
	depends on TI_ST
	help
	  This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
	  combo devices. This makes use of shared transport line discipline
	  core driver to communicate with the BT core of the combo chip.

	  Say Y here to compile support for Texas Instrument's WiLink7 driver
	  into the kernel or say M to compile it as module.
endmenu
Commit	Line	Data
1da177e4 LT	1
	2	menu "Bluetooth device drivers"
	3	depends on BT
	4
5e23b923	5	config BT_HCIBTUSB
9bfa35fe MH	6	tristate "HCI USB driver"
9bfa35fe MH	7	depends on USB
5e23b923 MH	8	help
	9	Bluetooth HCI USB driver.
	10	This driver is required if you want to use Bluetooth devices with
	11	USB interface.
	12
5e23b923 MH	13	Say Y here to compile support for Bluetooth USB devices into the
	14	kernel or say M to compile it as module (btusb).
	15
ddbaf13e MH	16	config BT_HCIBTSDIO
	17	tristate "HCI SDIO driver"
	18	depends on MMC
	19	help
	20	Bluetooth HCI SDIO driver.
	21	This driver is required if you want to use Bluetooth device with
	22	SDIO interface.
	23
	24	Say Y here to compile support for Bluetooth SDIO devices into the
	25	kernel or say M to compile it as module (btsdio).
	26
1da177e4 LT	27	config BT_HCIUART
	28	tristate "HCI UART driver"
	29	help
	30	Bluetooth HCI UART driver.
	31	This driver is required if you want to use Bluetooth devices with
	32	serial port interface. You will also need this driver if you have
	33	UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
	34	adapter and BrainBoxes Bluetooth PC Card.
	35
	36	Say Y here to compile support for Bluetooth UART devices into the
	37	kernel or say M to compile it as module (hci_uart).
	38
	39	config BT_HCIUART_H4
	40	bool "UART (H4) protocol support"
	41	depends on BT_HCIUART
	42	help
	43	UART (H4) is serial protocol for communication between Bluetooth
	44	device and host. This protocol is required for most Bluetooth devices
	45	with UART interface, including PCMCIA and CF cards.
	46
	47	Say Y here to compile support for HCI UART (H4) protocol.
	48
	49	config BT_HCIUART_BCSP
	50	bool "BCSP protocol support"
	51	depends on BT_HCIUART
d3a8eab0	52	select BITREVERSE
1da177e4 LT	53	help
	54	BCSP (BlueCore Serial Protocol) is serial protocol for communication
	55	between Bluetooth device and host. This protocol is required for non
	56	USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
	57	CF cards.
	58
	59	Say Y here to compile support for HCI BCSP protocol.
	60
b3190df6 SS	61	config BT_HCIUART_ATH3K
	62	bool "Atheros AR300x serial support"
	63	depends on BT_HCIUART
	64	help
	65	HCIATH3K (HCI Atheros AR300x) is a serial protocol for
	66	communication between host and Atheros AR300x Bluetooth devices.
	67	This protocol enables AR300x chips to be enabled with
	68	power management support.
	69	Enable this if you have Atheros AR300x serial Bluetooth device.
	70
	71	Say Y here to compile support for HCI UART ATH3K protocol.
	72
166d2f6a OBC	73	config BT_HCIUART_LL
	74	bool "HCILL protocol support"
	75	depends on BT_HCIUART
	76	help
	77	HCILL (HCI Low Level) is a serial protocol for communication
	78	between Bluetooth device and host. This protocol is required for
	79	serial Bluetooth devices that are based on Texas Instruments'
	80	BRF chips.
	81
	82	Say Y here to compile support for HCILL protocol.
	83
7dec65c8 JH	84	config BT_HCIUART_3WIRE
	85	bool "Three-wire UART (H5) protocol support"
	86	depends on BT_HCIUART
	87	help
	88	The HCI Three-wire UART Transport Layer makes it possible to
	89	user the Bluetooth HCI over a serial port interface. The HCI
	90	Three-wire UART Transport Layer assumes that the UART
	91	communication may have bit errors, overrun errors or burst
	92	errors and thereby making CTS/RTS lines unnecessary.
	93
	94	Say Y here to compile support for Three-wire UART protocol.
	95
1da177e4 LT	96	config BT_HCIBCM203X
	97	tristate "HCI BCM203x USB driver"
	98	depends on USB
	99	select FW_LOADER
	100	help
	101	Bluetooth HCI BCM203x USB driver.
	102	This driver provides the firmware loading mechanism for the Broadcom
	103	Blutonium based devices.
	104
	105	Say Y here to compile support for HCI BCM203x devices into the
	106	kernel or say M to compile it as module (bcm203x).
	107
	108	config BT_HCIBPA10X
	109	tristate "HCI BPA10x USB driver"
	110	depends on USB
	111	help
	112	Bluetooth HCI BPA10x USB driver.
	113	This driver provides support for the Digianswer BPA 100/105 Bluetooth
	114	sniffer devices.
	115
	116	Say Y here to compile support for HCI BPA10x devices into the
	117	kernel or say M to compile it as module (bpa10x).
	118
	119	config BT_HCIBFUSB
	120	tristate "HCI BlueFRITZ! USB driver"
	121	depends on USB
	122	select FW_LOADER
	123	help
	124	Bluetooth HCI BlueFRITZ! USB driver.
	125	This driver provides support for Bluetooth USB devices with AVM
	126	interface:
	127	AVM BlueFRITZ! USB
	128
	129	Say Y here to compile support for HCI BFUSB devices into the
	130	kernel or say M to compile it as module (bfusb).
	131
	132	config BT_HCIDTL1
	133	tristate "HCI DTL1 (PC Card) driver"
	134	depends on PCMCIA
	135	help
	136	Bluetooth HCI DTL1 (PC Card) driver.
	137	This driver provides support for Bluetooth PCMCIA devices with
	138	Nokia DTL1 interface:
	139	Nokia Bluetooth Card
	140	Socket Bluetooth CF Card
	141
	142	Say Y here to compile support for HCI DTL1 devices into the
	143	kernel or say M to compile it as module (dtl1_cs).
	144
	145	config BT_HCIBT3C
	146	tristate "HCI BT3C (PC Card) driver"
	147	depends on PCMCIA
	148	select FW_LOADER
	149	help
	150	Bluetooth HCI BT3C (PC Card) driver.
	151	This driver provides support for Bluetooth PCMCIA devices with
	152	3Com BT3C interface:
	153	3Com Bluetooth Card (3CRWB6096)
	154	HP Bluetooth Card
	155
	156	Say Y here to compile support for HCI BT3C devices into the
	157	kernel or say M to compile it as module (bt3c_cs).
	158
	159	config BT_HCIBLUECARD
160	tristate "HCI BlueCard (PC Card) driver"
161	depends on PCMCIA
162	help
163	Bluetooth HCI BlueCard (PC Card) driver.
164	This driver provides support for Bluetooth PCMCIA devices with
165	Anycom BlueCard interface:
166	Anycom Bluetooth PC Card
167	Anycom Bluetooth CF Card
168
169	Say Y here to compile support for HCI BlueCard devices into the
170	kernel or say M to compile it as module (bluecard_cs).
171
172	config BT_HCIBTUART
173	tristate "HCI UART (PC Card) device driver"
174	depends on PCMCIA
175	help
176	Bluetooth HCI UART (PC Card) driver.
177	This driver provides support for Bluetooth PCMCIA devices with
178	an UART interface:
179	Xircom CreditCard Bluetooth Adapter
180	Xircom RealPort2 Bluetooth Adapter
181	Sphinx PICO Card
182	H-Soft blue+Card
183	Cyber-blue Compact Flash Card
184
185	Say Y here to compile support for HCI UART devices into the
186	kernel or say M to compile it as module (btuart_cs).
187
188	config BT_HCIVHCI
189	tristate "HCI VHCI (Virtual HCI device) driver"
190	help
191	Bluetooth Virtual HCI device driver.
192	This driver is required if you want to use HCI Emulation software.
193
194	Say Y here to compile support for virtual HCI devices into the
195	kernel or say M to compile it as module (hci_vhci).
196
132ff4e5 BZ	197	config BT_MRVL
132ff4e5 BZ	198	tristate "Marvell Bluetooth driver support"
132ff4e5 BZ	199	help
	200	The core driver to support Marvell Bluetooth devices.
	201
	202	This driver is required if you want to support
2ac654f7	203	Marvell Bluetooth devices, such as 8688/8787/8797.
132ff4e5 BZ	204
	205	Say Y here to compile Marvell Bluetooth driver
	206	into the kernel or say M to compile it as module.
	207
789221ec BZ	208	config BT_MRVL_SDIO
	209	tristate "Marvell BT-over-SDIO driver"
	210	depends on BT_MRVL && MMC
e7a25f98	211	select FW_LOADER
789221ec BZ	212	help
	213	The driver for Marvell Bluetooth chipsets with SDIO interface.
	214
	215	This driver is required if you want to use Marvell Bluetooth
2ac654f7 BZ	216	devices with SDIO interface. Currently SD8688/SD8787/SD8797
2ac654f7 BZ	217	chipsets are supported.
789221ec BZ	218
	219	Say Y here to compile support for Marvell BT-over-SDIO driver
	220	into the kernel or say M to compile it as module.
	221
9670d80a VK	222	config BT_ATH3K
	223	tristate "Atheros firmware download driver"
	224	depends on BT_HCIBTUSB
	225	select FW_LOADER
	226	help
	227	Bluetooth firmware download driver.
	228	This driver loads the firmware into the Atheros Bluetooth
	229	chipset.
1da177e4	230
9670d80a VK	231	Say Y here to compile support for "Atheros firmware download driver"
	232	into the kernel or say M to compile it as module (ath3k).
	233
363907af PS	234	config BT_WILINK
	235	tristate "Texas Instruments WiLink7 driver"
	236	depends on TI_ST
	237	help
	238	This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
	239	combo devices. This makes use of shared transport line discipline
	240	core driver to communicate with the BT core of the combo chip.
	241
	242	Say Y here to compile support for Texas Instrument's WiLink7 driver
	243	into the kernel or say M to compile it as module.
9670d80a	244	endmenu