]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * | |
3 | * mwavedd.c -- mwave device driver | |
4 | * | |
5 | * | |
6 | * Written By: Mike Sullivan IBM Corporation | |
7 | * | |
8 | * Copyright (C) 1999 IBM Corporation | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License as published by | |
12 | * the Free Software Foundation; either version 2 of the License, or | |
13 | * (at your option) any later version. | |
14 | * | |
15 | * This program is distributed in the hope that it will be useful, | |
16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
18 | * GNU General Public License for more details. | |
19 | * | |
20 | * NO WARRANTY | |
21 | * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR | |
22 | * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT | |
23 | * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, | |
24 | * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is | |
25 | * solely responsible for determining the appropriateness of using and | |
26 | * distributing the Program and assumes all risks associated with its | |
27 | * exercise of rights under this Agreement, including but not limited to | |
28 | * the risks and costs of program errors, damage to or loss of data, | |
29 | * programs or equipment, and unavailability or interruption of operations. | |
30 | * | |
31 | * DISCLAIMER OF LIABILITY | |
32 | * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY | |
33 | * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
34 | * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND | |
35 | * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR | |
36 | * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | |
37 | * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED | |
38 | * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES | |
39 | * | |
40 | * You should have received a copy of the GNU General Public License | |
41 | * along with this program; if not, write to the Free Software | |
42 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
43 | * | |
44 | * | |
45 | * 10/23/2000 - Alpha Release | |
46 | * First release to the public | |
47 | */ | |
48 | ||
49 | #include <linux/module.h> | |
50 | #include <linux/kernel.h> | |
51 | #include <linux/fs.h> | |
52 | #include <linux/init.h> | |
53 | #include <linux/major.h> | |
54 | #include <linux/miscdevice.h> | |
55 | #include <linux/device.h> | |
56 | #include <linux/serial.h> | |
57 | #include <linux/sched.h> | |
58 | #include <linux/spinlock.h> | |
db41bc9c | 59 | #include <linux/smp_lock.h> |
1da177e4 | 60 | #include <linux/delay.h> |
5981d644 | 61 | #include <linux/serial_8250.h> |
1da177e4 LT |
62 | #include "smapi.h" |
63 | #include "mwavedd.h" | |
64 | #include "3780i.h" | |
65 | #include "tp3780i.h" | |
66 | ||
67 | MODULE_DESCRIPTION("3780i Advanced Communications Processor (Mwave) driver"); | |
68 | MODULE_AUTHOR("Mike Sullivan and Paul Schroeder"); | |
69 | MODULE_LICENSE("GPL"); | |
70 | ||
71 | /* | |
72 | * These parameters support the setting of MWave resources. Note that no | |
73 | * checks are made against other devices (ie. superio) for conflicts. | |
74 | * We'll depend on users using the tpctl utility to do that for now | |
75 | */ | |
76 | int mwave_debug = 0; | |
77 | int mwave_3780i_irq = 0; | |
78 | int mwave_3780i_io = 0; | |
79 | int mwave_uart_irq = 0; | |
80 | int mwave_uart_io = 0; | |
81 | module_param(mwave_debug, int, 0); | |
82 | module_param(mwave_3780i_irq, int, 0); | |
83 | module_param(mwave_3780i_io, int, 0); | |
84 | module_param(mwave_uart_irq, int, 0); | |
85 | module_param(mwave_uart_io, int, 0); | |
86 | ||
87 | static int mwave_open(struct inode *inode, struct file *file); | |
88 | static int mwave_close(struct inode *inode, struct file *file); | |
909d145f AC |
89 | static long mwave_ioctl(struct file *filp, unsigned int iocmd, |
90 | unsigned long ioarg); | |
1da177e4 LT |
91 | |
92 | MWAVE_DEVICE_DATA mwave_s_mdd; | |
93 | ||
94 | static int mwave_open(struct inode *inode, struct file *file) | |
95 | { | |
96 | unsigned int retval = 0; | |
97 | ||
98 | PRINTK_3(TRACE_MWAVE, | |
99 | "mwavedd::mwave_open, entry inode %p file %p\n", | |
100 | inode, file); | |
101 | PRINTK_2(TRACE_MWAVE, | |
102 | "mwavedd::mwave_open, exit return retval %x\n", retval); | |
103 | ||
db41bc9c | 104 | cycle_kernel_lock(); |
1da177e4 LT |
105 | return retval; |
106 | } | |
107 | ||
108 | static int mwave_close(struct inode *inode, struct file *file) | |
109 | { | |
110 | unsigned int retval = 0; | |
111 | ||
112 | PRINTK_3(TRACE_MWAVE, | |
113 | "mwavedd::mwave_close, entry inode %p file %p\n", | |
114 | inode, file); | |
115 | ||
116 | PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_close, exit retval %x\n", | |
117 | retval); | |
118 | ||
119 | return retval; | |
120 | } | |
121 | ||
909d145f AC |
122 | static long mwave_ioctl(struct file *file, unsigned int iocmd, |
123 | unsigned long ioarg) | |
1da177e4 LT |
124 | { |
125 | unsigned int retval = 0; | |
126 | pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd; | |
127 | void __user *arg = (void __user *)ioarg; | |
128 | ||
909d145f AC |
129 | PRINTK_4(TRACE_MWAVE, |
130 | "mwavedd::mwave_ioctl, entry file %p cmd %x arg %x\n", | |
131 | file, iocmd, (int) ioarg); | |
1da177e4 LT |
132 | |
133 | switch (iocmd) { | |
134 | ||
135 | case IOCTL_MW_RESET: | |
136 | PRINTK_1(TRACE_MWAVE, | |
137 | "mwavedd::mwave_ioctl, IOCTL_MW_RESET" | |
138 | " calling tp3780I_ResetDSP\n"); | |
909d145f | 139 | lock_kernel(); |
1da177e4 | 140 | retval = tp3780I_ResetDSP(&pDrvData->rBDData); |
909d145f | 141 | unlock_kernel(); |
1da177e4 LT |
142 | PRINTK_2(TRACE_MWAVE, |
143 | "mwavedd::mwave_ioctl, IOCTL_MW_RESET" | |
144 | " retval %x from tp3780I_ResetDSP\n", | |
145 | retval); | |
146 | break; | |
147 | ||
148 | case IOCTL_MW_RUN: | |
149 | PRINTK_1(TRACE_MWAVE, | |
150 | "mwavedd::mwave_ioctl, IOCTL_MW_RUN" | |
151 | " calling tp3780I_StartDSP\n"); | |
909d145f | 152 | lock_kernel(); |
1da177e4 | 153 | retval = tp3780I_StartDSP(&pDrvData->rBDData); |
909d145f | 154 | unlock_kernel(); |
1da177e4 LT |
155 | PRINTK_2(TRACE_MWAVE, |
156 | "mwavedd::mwave_ioctl, IOCTL_MW_RUN" | |
157 | " retval %x from tp3780I_StartDSP\n", | |
158 | retval); | |
159 | break; | |
160 | ||
161 | case IOCTL_MW_DSP_ABILITIES: { | |
162 | MW_ABILITIES rAbilities; | |
163 | ||
164 | PRINTK_1(TRACE_MWAVE, | |
165 | "mwavedd::mwave_ioctl," | |
166 | " IOCTL_MW_DSP_ABILITIES calling" | |
167 | " tp3780I_QueryAbilities\n"); | |
909d145f | 168 | lock_kernel(); |
1da177e4 LT |
169 | retval = tp3780I_QueryAbilities(&pDrvData->rBDData, |
170 | &rAbilities); | |
909d145f | 171 | unlock_kernel(); |
1da177e4 LT |
172 | PRINTK_2(TRACE_MWAVE, |
173 | "mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES" | |
174 | " retval %x from tp3780I_QueryAbilities\n", | |
175 | retval); | |
176 | if (retval == 0) { | |
177 | if( copy_to_user(arg, &rAbilities, | |
178 | sizeof(MW_ABILITIES)) ) | |
179 | return -EFAULT; | |
180 | } | |
181 | PRINTK_2(TRACE_MWAVE, | |
182 | "mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES" | |
183 | " exit retval %x\n", | |
184 | retval); | |
185 | } | |
186 | break; | |
187 | ||
188 | case IOCTL_MW_READ_DATA: | |
189 | case IOCTL_MW_READCLEAR_DATA: { | |
190 | MW_READWRITE rReadData; | |
191 | unsigned short __user *pusBuffer = NULL; | |
192 | ||
193 | if( copy_from_user(&rReadData, arg, | |
194 | sizeof(MW_READWRITE)) ) | |
195 | return -EFAULT; | |
196 | pusBuffer = (unsigned short __user *) (rReadData.pBuf); | |
197 | ||
198 | PRINTK_4(TRACE_MWAVE, | |
199 | "mwavedd::mwave_ioctl IOCTL_MW_READ_DATA," | |
200 | " size %lx, ioarg %lx pusBuffer %p\n", | |
201 | rReadData.ulDataLength, ioarg, pusBuffer); | |
909d145f | 202 | lock_kernel(); |
1da177e4 LT |
203 | retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData, |
204 | iocmd, | |
205 | pusBuffer, | |
206 | rReadData.ulDataLength, | |
207 | rReadData.usDspAddress); | |
909d145f | 208 | unlock_kernel(); |
1da177e4 LT |
209 | } |
210 | break; | |
211 | ||
212 | case IOCTL_MW_READ_INST: { | |
213 | MW_READWRITE rReadData; | |
214 | unsigned short __user *pusBuffer = NULL; | |
215 | ||
216 | if( copy_from_user(&rReadData, arg, | |
217 | sizeof(MW_READWRITE)) ) | |
218 | return -EFAULT; | |
219 | pusBuffer = (unsigned short __user *) (rReadData.pBuf); | |
220 | ||
221 | PRINTK_4(TRACE_MWAVE, | |
222 | "mwavedd::mwave_ioctl IOCTL_MW_READ_INST," | |
223 | " size %lx, ioarg %lx pusBuffer %p\n", | |
224 | rReadData.ulDataLength / 2, ioarg, | |
225 | pusBuffer); | |
909d145f | 226 | lock_kernel(); |
1da177e4 LT |
227 | retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData, |
228 | iocmd, pusBuffer, | |
229 | rReadData.ulDataLength / 2, | |
230 | rReadData.usDspAddress); | |
909d145f | 231 | unlock_kernel(); |
1da177e4 LT |
232 | } |
233 | break; | |
234 | ||
235 | case IOCTL_MW_WRITE_DATA: { | |
236 | MW_READWRITE rWriteData; | |
237 | unsigned short __user *pusBuffer = NULL; | |
238 | ||
239 | if( copy_from_user(&rWriteData, arg, | |
240 | sizeof(MW_READWRITE)) ) | |
241 | return -EFAULT; | |
242 | pusBuffer = (unsigned short __user *) (rWriteData.pBuf); | |
243 | ||
244 | PRINTK_4(TRACE_MWAVE, | |
245 | "mwavedd::mwave_ioctl IOCTL_MW_WRITE_DATA," | |
246 | " size %lx, ioarg %lx pusBuffer %p\n", | |
247 | rWriteData.ulDataLength, ioarg, | |
248 | pusBuffer); | |
909d145f | 249 | lock_kernel(); |
1da177e4 LT |
250 | retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData, |
251 | iocmd, pusBuffer, | |
252 | rWriteData.ulDataLength, | |
253 | rWriteData.usDspAddress); | |
909d145f | 254 | unlock_kernel(); |
1da177e4 LT |
255 | } |
256 | break; | |
257 | ||
258 | case IOCTL_MW_WRITE_INST: { | |
259 | MW_READWRITE rWriteData; | |
260 | unsigned short __user *pusBuffer = NULL; | |
261 | ||
262 | if( copy_from_user(&rWriteData, arg, | |
263 | sizeof(MW_READWRITE)) ) | |
264 | return -EFAULT; | |
265 | pusBuffer = (unsigned short __user *)(rWriteData.pBuf); | |
266 | ||
267 | PRINTK_4(TRACE_MWAVE, | |
268 | "mwavedd::mwave_ioctl IOCTL_MW_WRITE_INST," | |
269 | " size %lx, ioarg %lx pusBuffer %p\n", | |
270 | rWriteData.ulDataLength, ioarg, | |
271 | pusBuffer); | |
909d145f | 272 | lock_kernel(); |
1da177e4 LT |
273 | retval = tp3780I_ReadWriteDspIStore(&pDrvData->rBDData, |
274 | iocmd, pusBuffer, | |
275 | rWriteData.ulDataLength, | |
276 | rWriteData.usDspAddress); | |
909d145f | 277 | unlock_kernel(); |
1da177e4 LT |
278 | } |
279 | break; | |
280 | ||
281 | case IOCTL_MW_REGISTER_IPC: { | |
282 | unsigned int ipcnum = (unsigned int) ioarg; | |
283 | ||
d698f1c7 | 284 | if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) { |
1da177e4 LT |
285 | PRINTK_ERROR(KERN_ERR_MWAVE |
286 | "mwavedd::mwave_ioctl:" | |
287 | " IOCTL_MW_REGISTER_IPC:" | |
288 | " Error: Invalid ipcnum %x\n", | |
289 | ipcnum); | |
290 | return -EINVAL; | |
291 | } | |
dc80df56 RK |
292 | PRINTK_3(TRACE_MWAVE, |
293 | "mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC" | |
294 | " ipcnum %x entry usIntCount %x\n", | |
295 | ipcnum, | |
296 | pDrvData->IPCs[ipcnum].usIntCount); | |
297 | ||
909d145f | 298 | lock_kernel(); |
1da177e4 LT |
299 | pDrvData->IPCs[ipcnum].bIsHere = FALSE; |
300 | pDrvData->IPCs[ipcnum].bIsEnabled = TRUE; | |
909d145f | 301 | unlock_kernel(); |
1da177e4 LT |
302 | |
303 | PRINTK_2(TRACE_MWAVE, | |
304 | "mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC" | |
305 | " ipcnum %x exit\n", | |
306 | ipcnum); | |
307 | } | |
308 | break; | |
309 | ||
310 | case IOCTL_MW_GET_IPC: { | |
311 | unsigned int ipcnum = (unsigned int) ioarg; | |
312 | ||
095d030c | 313 | if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) { |
1da177e4 LT |
314 | PRINTK_ERROR(KERN_ERR_MWAVE |
315 | "mwavedd::mwave_ioctl:" | |
316 | " IOCTL_MW_GET_IPC: Error:" | |
317 | " Invalid ipcnum %x\n", ipcnum); | |
318 | return -EINVAL; | |
319 | } | |
dc80df56 RK |
320 | PRINTK_3(TRACE_MWAVE, |
321 | "mwavedd::mwave_ioctl IOCTL_MW_GET_IPC" | |
322 | " ipcnum %x, usIntCount %x\n", | |
323 | ipcnum, | |
324 | pDrvData->IPCs[ipcnum].usIntCount); | |
1da177e4 | 325 | |
909d145f | 326 | lock_kernel(); |
1da177e4 LT |
327 | if (pDrvData->IPCs[ipcnum].bIsEnabled == TRUE) { |
328 | DECLARE_WAITQUEUE(wait, current); | |
329 | ||
330 | PRINTK_2(TRACE_MWAVE, | |
331 | "mwavedd::mwave_ioctl, thread for" | |
332 | " ipc %x going to sleep\n", | |
333 | ipcnum); | |
334 | add_wait_queue(&pDrvData->IPCs[ipcnum].ipc_wait_queue, &wait); | |
335 | pDrvData->IPCs[ipcnum].bIsHere = TRUE; | |
336 | set_current_state(TASK_INTERRUPTIBLE); | |
337 | /* check whether an event was signalled by */ | |
338 | /* the interrupt handler while we were gone */ | |
339 | if (pDrvData->IPCs[ipcnum].usIntCount == 1) { /* first int has occurred (race condition) */ | |
340 | pDrvData->IPCs[ipcnum].usIntCount = 2; /* first int has been handled */ | |
341 | PRINTK_2(TRACE_MWAVE, | |
342 | "mwavedd::mwave_ioctl" | |
343 | " IOCTL_MW_GET_IPC ipcnum %x" | |
344 | " handling first int\n", | |
345 | ipcnum); | |
346 | } else { /* either 1st int has not yet occurred, or we have already handled the first int */ | |
347 | schedule(); | |
348 | if (pDrvData->IPCs[ipcnum].usIntCount == 1) { | |
349 | pDrvData->IPCs[ipcnum].usIntCount = 2; | |
350 | } | |
351 | PRINTK_2(TRACE_MWAVE, | |
352 | "mwavedd::mwave_ioctl" | |
353 | " IOCTL_MW_GET_IPC ipcnum %x" | |
354 | " woke up and returning to" | |
355 | " application\n", | |
356 | ipcnum); | |
357 | } | |
358 | pDrvData->IPCs[ipcnum].bIsHere = FALSE; | |
359 | remove_wait_queue(&pDrvData->IPCs[ipcnum].ipc_wait_queue, &wait); | |
360 | set_current_state(TASK_RUNNING); | |
361 | PRINTK_2(TRACE_MWAVE, | |
362 | "mwavedd::mwave_ioctl IOCTL_MW_GET_IPC," | |
363 | " returning thread for ipc %x" | |
364 | " processing\n", | |
365 | ipcnum); | |
366 | } | |
909d145f | 367 | unlock_kernel(); |
1da177e4 LT |
368 | } |
369 | break; | |
370 | ||
371 | case IOCTL_MW_UNREGISTER_IPC: { | |
372 | unsigned int ipcnum = (unsigned int) ioarg; | |
373 | ||
374 | PRINTK_2(TRACE_MWAVE, | |
375 | "mwavedd::mwave_ioctl IOCTL_MW_UNREGISTER_IPC" | |
376 | " ipcnum %x\n", | |
377 | ipcnum); | |
095d030c | 378 | if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) { |
1da177e4 LT |
379 | PRINTK_ERROR(KERN_ERR_MWAVE |
380 | "mwavedd::mwave_ioctl:" | |
381 | " IOCTL_MW_UNREGISTER_IPC:" | |
382 | " Error: Invalid ipcnum %x\n", | |
383 | ipcnum); | |
384 | return -EINVAL; | |
385 | } | |
909d145f | 386 | lock_kernel(); |
1da177e4 LT |
387 | if (pDrvData->IPCs[ipcnum].bIsEnabled == TRUE) { |
388 | pDrvData->IPCs[ipcnum].bIsEnabled = FALSE; | |
389 | if (pDrvData->IPCs[ipcnum].bIsHere == TRUE) { | |
390 | wake_up_interruptible(&pDrvData->IPCs[ipcnum].ipc_wait_queue); | |
391 | } | |
392 | } | |
909d145f | 393 | unlock_kernel(); |
1da177e4 LT |
394 | } |
395 | break; | |
396 | ||
397 | default: | |
1da177e4 LT |
398 | return -ENOTTY; |
399 | break; | |
400 | } /* switch */ | |
401 | ||
402 | PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_ioctl, exit retval %x\n", retval); | |
403 | ||
404 | return retval; | |
405 | } | |
406 | ||
407 | ||
408 | static ssize_t mwave_read(struct file *file, char __user *buf, size_t count, | |
409 | loff_t * ppos) | |
410 | { | |
411 | PRINTK_5(TRACE_MWAVE, | |
412 | "mwavedd::mwave_read entry file %p, buf %p, count %zx ppos %p\n", | |
413 | file, buf, count, ppos); | |
414 | ||
415 | return -EINVAL; | |
416 | } | |
417 | ||
418 | ||
419 | static ssize_t mwave_write(struct file *file, const char __user *buf, | |
420 | size_t count, loff_t * ppos) | |
421 | { | |
422 | PRINTK_5(TRACE_MWAVE, | |
423 | "mwavedd::mwave_write entry file %p, buf %p," | |
424 | " count %zx ppos %p\n", | |
425 | file, buf, count, ppos); | |
426 | ||
427 | return -EINVAL; | |
428 | } | |
429 | ||
430 | ||
431 | static int register_serial_portandirq(unsigned int port, int irq) | |
432 | { | |
5981d644 AC |
433 | struct uart_port uart; |
434 | ||
1da177e4 LT |
435 | switch ( port ) { |
436 | case 0x3f8: | |
437 | case 0x2f8: | |
438 | case 0x3e8: | |
439 | case 0x2e8: | |
440 | /* OK */ | |
441 | break; | |
442 | default: | |
443 | PRINTK_ERROR(KERN_ERR_MWAVE | |
444 | "mwavedd::register_serial_portandirq:" | |
445 | " Error: Illegal port %x\n", port ); | |
446 | return -1; | |
447 | } /* switch */ | |
448 | /* port is okay */ | |
449 | ||
450 | switch ( irq ) { | |
451 | case 3: | |
452 | case 4: | |
453 | case 5: | |
454 | case 7: | |
455 | /* OK */ | |
456 | break; | |
457 | default: | |
458 | PRINTK_ERROR(KERN_ERR_MWAVE | |
459 | "mwavedd::register_serial_portandirq:" | |
460 | " Error: Illegal irq %x\n", irq ); | |
461 | return -1; | |
462 | } /* switch */ | |
463 | /* irq is okay */ | |
464 | ||
5981d644 AC |
465 | memset(&uart, 0, sizeof(struct uart_port)); |
466 | ||
467 | uart.uartclk = 1843200; | |
468 | uart.iobase = port; | |
469 | uart.irq = irq; | |
470 | uart.iotype = UPIO_PORT; | |
471 | uart.flags = UPF_SHARE_IRQ; | |
472 | return serial8250_register_port(&uart); | |
1da177e4 LT |
473 | } |
474 | ||
475 | ||
62322d25 | 476 | static const struct file_operations mwave_fops = { |
1da177e4 LT |
477 | .owner = THIS_MODULE, |
478 | .read = mwave_read, | |
479 | .write = mwave_write, | |
909d145f | 480 | .unlocked_ioctl = mwave_ioctl, |
1da177e4 LT |
481 | .open = mwave_open, |
482 | .release = mwave_close | |
483 | }; | |
484 | ||
485 | ||
486 | static struct miscdevice mwave_misc_dev = { MWAVE_MINOR, "mwave", &mwave_fops }; | |
487 | ||
488 | #if 0 /* totally b0rked */ | |
489 | /* | |
490 | * sysfs support <[email protected]> | |
491 | */ | |
492 | ||
493 | struct device mwave_device; | |
494 | ||
495 | /* Prevent code redundancy, create a macro for mwave_show_* functions. */ | |
496 | #define mwave_show_function(attr_name, format_string, field) \ | |
74880c06 | 497 | static ssize_t mwave_show_##attr_name(struct device *dev, struct device_attribute *attr, char *buf) \ |
1da177e4 LT |
498 | { \ |
499 | DSP_3780I_CONFIG_SETTINGS *pSettings = \ | |
500 | &mwave_s_mdd.rBDData.rDspSettings; \ | |
501 | return sprintf(buf, format_string, pSettings->field); \ | |
502 | } | |
503 | ||
504 | /* All of our attributes are read attributes. */ | |
505 | #define mwave_dev_rd_attr(attr_name, format_string, field) \ | |
506 | mwave_show_function(attr_name, format_string, field) \ | |
507 | static DEVICE_ATTR(attr_name, S_IRUGO, mwave_show_##attr_name, NULL) | |
508 | ||
509 | mwave_dev_rd_attr (3780i_dma, "%i\n", usDspDma); | |
510 | mwave_dev_rd_attr (3780i_irq, "%i\n", usDspIrq); | |
511 | mwave_dev_rd_attr (3780i_io, "%#.4x\n", usDspBaseIO); | |
512 | mwave_dev_rd_attr (uart_irq, "%i\n", usUartIrq); | |
513 | mwave_dev_rd_attr (uart_io, "%#.4x\n", usUartBaseIO); | |
514 | ||
515 | static struct device_attribute * const mwave_dev_attrs[] = { | |
516 | &dev_attr_3780i_dma, | |
517 | &dev_attr_3780i_irq, | |
518 | &dev_attr_3780i_io, | |
519 | &dev_attr_uart_irq, | |
520 | &dev_attr_uart_io, | |
521 | }; | |
522 | #endif | |
523 | ||
524 | /* | |
525 | * mwave_init is called on module load | |
526 | * | |
527 | * mwave_exit is called on module unload | |
528 | * mwave_exit is also used to clean up after an aborted mwave_init | |
529 | */ | |
530 | static void mwave_exit(void) | |
531 | { | |
532 | pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd; | |
533 | ||
534 | PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_exit entry\n"); | |
535 | ||
536 | #if 0 | |
537 | for (i = 0; i < pDrvData->nr_registered_attrs; i++) | |
538 | device_remove_file(&mwave_device, mwave_dev_attrs[i]); | |
539 | pDrvData->nr_registered_attrs = 0; | |
540 | ||
541 | if (pDrvData->device_registered) { | |
542 | device_unregister(&mwave_device); | |
543 | pDrvData->device_registered = FALSE; | |
544 | } | |
545 | #endif | |
546 | ||
547 | if ( pDrvData->sLine >= 0 ) { | |
5981d644 | 548 | serial8250_unregister_port(pDrvData->sLine); |
1da177e4 LT |
549 | } |
550 | if (pDrvData->bMwaveDevRegistered) { | |
551 | misc_deregister(&mwave_misc_dev); | |
552 | } | |
553 | if (pDrvData->bDSPEnabled) { | |
554 | tp3780I_DisableDSP(&pDrvData->rBDData); | |
555 | } | |
556 | if (pDrvData->bResourcesClaimed) { | |
557 | tp3780I_ReleaseResources(&pDrvData->rBDData); | |
558 | } | |
559 | if (pDrvData->bBDInitialized) { | |
560 | tp3780I_Cleanup(&pDrvData->rBDData); | |
561 | } | |
562 | ||
563 | PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_exit exit\n"); | |
564 | } | |
565 | ||
566 | module_exit(mwave_exit); | |
567 | ||
568 | static int __init mwave_init(void) | |
569 | { | |
570 | int i; | |
571 | int retval = 0; | |
572 | pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd; | |
573 | ||
574 | PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_init entry\n"); | |
575 | ||
576 | memset(&mwave_s_mdd, 0, sizeof(MWAVE_DEVICE_DATA)); | |
577 | ||
578 | pDrvData->bBDInitialized = FALSE; | |
579 | pDrvData->bResourcesClaimed = FALSE; | |
580 | pDrvData->bDSPEnabled = FALSE; | |
581 | pDrvData->bDSPReset = FALSE; | |
582 | pDrvData->bMwaveDevRegistered = FALSE; | |
583 | pDrvData->sLine = -1; | |
584 | ||
585 | for (i = 0; i < ARRAY_SIZE(pDrvData->IPCs); i++) { | |
586 | pDrvData->IPCs[i].bIsEnabled = FALSE; | |
587 | pDrvData->IPCs[i].bIsHere = FALSE; | |
588 | pDrvData->IPCs[i].usIntCount = 0; /* no ints received yet */ | |
589 | init_waitqueue_head(&pDrvData->IPCs[i].ipc_wait_queue); | |
590 | } | |
591 | ||
592 | retval = tp3780I_InitializeBoardData(&pDrvData->rBDData); | |
593 | PRINTK_2(TRACE_MWAVE, | |
594 | "mwavedd::mwave_init, return from tp3780I_InitializeBoardData" | |
595 | " retval %x\n", | |
596 | retval); | |
597 | if (retval) { | |
598 | PRINTK_ERROR(KERN_ERR_MWAVE | |
599 | "mwavedd::mwave_init: Error:" | |
600 | " Failed to initialize board data\n"); | |
601 | goto cleanup_error; | |
602 | } | |
603 | pDrvData->bBDInitialized = TRUE; | |
604 | ||
605 | retval = tp3780I_CalcResources(&pDrvData->rBDData); | |
606 | PRINTK_2(TRACE_MWAVE, | |
607 | "mwavedd::mwave_init, return from tp3780I_CalcResources" | |
608 | " retval %x\n", | |
609 | retval); | |
610 | if (retval) { | |
611 | PRINTK_ERROR(KERN_ERR_MWAVE | |
612 | "mwavedd:mwave_init: Error:" | |
613 | " Failed to calculate resources\n"); | |
614 | goto cleanup_error; | |
615 | } | |
616 | ||
617 | retval = tp3780I_ClaimResources(&pDrvData->rBDData); | |
618 | PRINTK_2(TRACE_MWAVE, | |
619 | "mwavedd::mwave_init, return from tp3780I_ClaimResources" | |
620 | " retval %x\n", | |
621 | retval); | |
622 | if (retval) { | |
623 | PRINTK_ERROR(KERN_ERR_MWAVE | |
624 | "mwavedd:mwave_init: Error:" | |
625 | " Failed to claim resources\n"); | |
626 | goto cleanup_error; | |
627 | } | |
628 | pDrvData->bResourcesClaimed = TRUE; | |
629 | ||
630 | retval = tp3780I_EnableDSP(&pDrvData->rBDData); | |
631 | PRINTK_2(TRACE_MWAVE, | |
632 | "mwavedd::mwave_init, return from tp3780I_EnableDSP" | |
633 | " retval %x\n", | |
634 | retval); | |
635 | if (retval) { | |
636 | PRINTK_ERROR(KERN_ERR_MWAVE | |
637 | "mwavedd:mwave_init: Error:" | |
638 | " Failed to enable DSP\n"); | |
639 | goto cleanup_error; | |
640 | } | |
641 | pDrvData->bDSPEnabled = TRUE; | |
642 | ||
643 | if (misc_register(&mwave_misc_dev) < 0) { | |
644 | PRINTK_ERROR(KERN_ERR_MWAVE | |
645 | "mwavedd:mwave_init: Error:" | |
646 | " Failed to register misc device\n"); | |
647 | goto cleanup_error; | |
648 | } | |
649 | pDrvData->bMwaveDevRegistered = TRUE; | |
650 | ||
651 | pDrvData->sLine = register_serial_portandirq( | |
652 | pDrvData->rBDData.rDspSettings.usUartBaseIO, | |
653 | pDrvData->rBDData.rDspSettings.usUartIrq | |
654 | ); | |
655 | if (pDrvData->sLine < 0) { | |
656 | PRINTK_ERROR(KERN_ERR_MWAVE | |
657 | "mwavedd:mwave_init: Error:" | |
658 | " Failed to register serial driver\n"); | |
659 | goto cleanup_error; | |
660 | } | |
661 | /* uart is registered */ | |
662 | ||
663 | #if 0 | |
664 | /* sysfs */ | |
665 | memset(&mwave_device, 0, sizeof (struct device)); | |
24d25475 | 666 | dev_set_name(&mwave_device, "mwave"); |
1da177e4 LT |
667 | |
668 | if (device_register(&mwave_device)) | |
669 | goto cleanup_error; | |
670 | pDrvData->device_registered = TRUE; | |
671 | for (i = 0; i < ARRAY_SIZE(mwave_dev_attrs); i++) { | |
672 | if(device_create_file(&mwave_device, mwave_dev_attrs[i])) { | |
673 | PRINTK_ERROR(KERN_ERR_MWAVE | |
674 | "mwavedd:mwave_init: Error:" | |
675 | " Failed to create sysfs file %s\n", | |
676 | mwave_dev_attrs[i]->attr.name); | |
677 | goto cleanup_error; | |
678 | } | |
679 | pDrvData->nr_registered_attrs++; | |
680 | } | |
681 | #endif | |
682 | ||
683 | /* SUCCESS! */ | |
684 | return 0; | |
685 | ||
686 | cleanup_error: | |
687 | PRINTK_ERROR(KERN_ERR_MWAVE | |
688 | "mwavedd::mwave_init: Error:" | |
689 | " Failed to initialize\n"); | |
690 | mwave_exit(); /* clean up */ | |
691 | ||
692 | return -EIO; | |
693 | } | |
694 | ||
695 | module_init(mwave_init); | |
696 |