[linux.git] / drivers / net / saa9730.h

/*
 * Copyright (C) 2000, 2005  MIPS Technologies, Inc.  All rights reserved.
 *	Authors: Carsten Langgaard <[email protected]>
 *		 Maciej W. Rozycki <[email protected]>
 *
 * ########################################################################
 *
 *  This program is free software; you can distribute it and/or modify it
 *  under the terms of the GNU General Public License (Version 2) as
 *  published by the Free Software Foundation.
 *
 *  This program is distributed in the hope it will be useful, but WITHOUT
 *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 *  for more details.
 *
 *  You should have received a copy of the GNU General Public License along
 *  with this program; if not, write to the Free Software Foundation, Inc.,
 *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
 *
 * ########################################################################
 *
 * SAA9730 ethernet driver description.
 *
 */
#ifndef _SAA9730_H
#define _SAA9730_H


/* Number of 6-byte entries in the CAM. */
#define LAN_SAA9730_CAM_ENTRIES              10
#define	LAN_SAA9730_CAM_DWORDS               ((LAN_SAA9730_CAM_ENTRIES*6)/4)

/* TX and RX packet size: fixed to 2048 bytes, according to HW requirements. */
#define LAN_SAA9730_PACKET_SIZE                       2048

/*
 * Number of TX buffers = number of RX buffers = 2, which is fixed according
 * to HW requirements.
 */
#define LAN_SAA9730_BUFFERS                           2

/* Number of RX packets per RX buffer. */
#define LAN_SAA9730_RCV_Q_SIZE                        15

/* Number of TX packets per TX buffer. */
#define LAN_SAA9730_TXM_Q_SIZE                        15

/*
 * We get an interrupt for each LAN_SAA9730_DEFAULT_RCV_Q_INT_THRESHOLD
 * packets received.
 * If however we receive less than  LAN_SAA9730_DEFAULT_RCV_Q_INT_THRESHOLD
 * packets, the hardware can timeout after a certain time and still tell
 * us packets have arrived.
 * The timeout value in unit of 32 PCI clocks (33Mhz).
 * The value 200 approximates 0.0002 seconds.
 */
#define LAN_SAA9730_RCV_Q_INT_THRESHOLD               1
#define LAN_SAA9730_DEFAULT_TIME_OUT_CNT              10

#define RXSF_NDIS                       0
#define RXSF_READY                      2
#define RXSF_HWDONE                     3

#define TXSF_EMPTY                      0
#define TXSF_READY                      2
#define TXSF_HWDONE                     3

#define LANEND_LITTLE                   0
#define LANEND_BIG_2143                 1
#define LANEND_BIG_4321                 2

#define LANMB_ANY                       0
#define LANMB_8                         1
#define LANMB_32                        2
#define LANMB_64                        3

#define MACCM_AUTOMATIC                 0
#define MACCM_10MB                      1
#define MACCM_MII                       2

/*
 * PHY definitions for Basic registers of QS6612 (used on MIPS ATLAS board)
 */
#define PHY_CONTROL                     0x0
#define PHY_STATUS                      0x1
#define PHY_STATUS_LINK_UP              0x4
#define PHY_CONTROL_RESET               0x8000
#define PHY_CONTROL_AUTO_NEG            0x1000
#define PHY_CONTROL_RESTART_AUTO_NEG    0x0200
#define PHY_ADDRESS                     0x0

/* PK_COUNT register. */
#define PK_COUNT_TX_A_SHF               24
#define PK_COUNT_TX_A_MSK               (0xff << PK_COUNT_TX_A_SHF)
#define PK_COUNT_TX_B_SHF               16
#define PK_COUNT_TX_B_MSK               (0xff << PK_COUNT_TX_B_SHF)
#define PK_COUNT_RX_A_SHF               8
#define PK_COUNT_RX_A_MSK               (0xff << PK_COUNT_RX_A_SHF)
#define PK_COUNT_RX_B_SHF               0
#define PK_COUNT_RX_B_MSK               (0xff << PK_COUNT_RX_B_SHF)

/* OK2USE register. */
#define OK2USE_TX_A                     0x8
#define OK2USE_TX_B                     0x4
#define OK2USE_RX_A                     0x2
#define OK2USE_RX_B                     0x1

/* LAN DMA CONTROL register. */
#define DMA_CTL_BLK_INT                 0x80000000
#define DMA_CTL_MAX_XFER_SHF            18
#define DMA_CTL_MAX_XFER_MSK            (0x3 << LAN_DMA_CTL_MAX_XFER_SHF)
#define DMA_CTL_ENDIAN_SHF              16
#define DMA_CTL_ENDIAN_MSK              (0x3 << LAN_DMA_CTL_ENDIAN_SHF)
#define DMA_CTL_RX_INT_COUNT_SHF        8
#define DMA_CTL_RX_INT_COUNT_MSK        (0xff << LAN_DMA_CTL_RX_INT_COUNT_SHF)
#define DMA_CTL_EN_TX_DMA               0x00000080
#define DMA_CTL_EN_RX_DMA               0x00000040
#define DMA_CTL_RX_INT_BUFFUL_EN        0x00000020
#define DMA_CTL_RX_INT_TO_EN            0x00000010
#define DMA_CTL_RX_INT_EN               0x00000008
#define DMA_CTL_TX_INT_EN               0x00000004
#define DMA_CTL_MAC_TX_INT_EN           0x00000002
#define DMA_CTL_MAC_RX_INT_EN           0x00000001

/* DMA STATUS register. */
#define DMA_STATUS_BAD_ADDR_SHF         16
#define DMA_STATUS_BAD_ADDR_MSK         (0xf << DMA_STATUS_BAD_ADDR_SHF)
#define DMA_STATUS_RX_PKTS_RECEIVED_SHF 8
#define DMA_STATUS_RX_PKTS_RECEIVED_MSK (0xff << DMA_STATUS_RX_PKTS_RECEIVED_SHF)
#define DMA_STATUS_TX_EN_SYNC           0x00000080
#define DMA_STATUS_RX_BUF_A_FUL         0x00000040
#define DMA_STATUS_RX_BUF_B_FUL         0x00000020
#define DMA_STATUS_RX_TO_INT            0x00000010
#define DMA_STATUS_RX_INT               0x00000008
#define DMA_STATUS_TX_INT               0x00000004
#define DMA_STATUS_MAC_TX_INT           0x00000002
#define DMA_STATUS_MAC_RX_INT           0x00000001

/* DMA TEST/PANIC SWITHES register. */
#define DMA_TEST_LOOPBACK               0x01000000
#define DMA_TEST_SW_RESET               0x00000001

/* MAC CONTROL register. */
#define MAC_CONTROL_EN_MISS_ROLL        0x00002000
#define MAC_CONTROL_MISS_ROLL           0x00000400
#define MAC_CONTROL_LOOP10              0x00000080
#define MAC_CONTROL_CONN_SHF            5
#define MAC_CONTROL_CONN_MSK            (0x3 << MAC_CONTROL_CONN_SHF)
#define MAC_CONTROL_MAC_LOOP            0x00000010
#define MAC_CONTROL_FULL_DUP            0x00000008
#define MAC_CONTROL_RESET               0x00000004
#define MAC_CONTROL_HALT_IMM            0x00000002
#define MAC_CONTROL_HALT_REQ            0x00000001

/* CAM CONTROL register. */
#define CAM_CONTROL_COMP_EN             0x00000010
#define CAM_CONTROL_NEG_CAM             0x00000008
#define CAM_CONTROL_BROAD_ACC           0x00000004
#define CAM_CONTROL_GROUP_ACC           0x00000002
#define CAM_CONTROL_STATION_ACC         0x00000001

/* TRANSMIT CONTROL register. */
#define TX_CTL_EN_COMP                  0x00004000
#define TX_CTL_EN_TX_PAR                0x00002000
#define TX_CTL_EN_LATE_COLL             0x00001000
#define TX_CTL_EN_EX_COLL               0x00000800
#define TX_CTL_EN_L_CARR                0x00000400
#define TX_CTL_EN_EX_DEFER              0x00000200
#define TX_CTL_EN_UNDER                 0x00000100
#define TX_CTL_MII10                    0x00000080
#define TX_CTL_SD_PAUSE                 0x00000040
#define TX_CTL_NO_EX_DEF0               0x00000020
#define TX_CTL_F_BACK                   0x00000010
#define TX_CTL_NO_CRC                   0x00000008
#define TX_CTL_NO_PAD                   0x00000004
#define TX_CTL_TX_HALT                  0x00000002
#define TX_CTL_TX_EN                    0x00000001

/* TRANSMIT STATUS register. */
#define TX_STATUS_SQ_ERR                0x00010000
#define TX_STATUS_TX_HALTED             0x00008000
#define TX_STATUS_COMP                  0x00004000
#define TX_STATUS_TX_PAR                0x00002000
#define TX_STATUS_LATE_COLL             0x00001000
#define TX_STATUS_TX10_STAT             0x00000800
#define TX_STATUS_L_CARR                0x00000400
#define TX_STATUS_EX_DEFER              0x00000200
#define TX_STATUS_UNDER                 0x00000100
#define TX_STATUS_IN_TX                 0x00000080
#define TX_STATUS_PAUSED                0x00000040
#define TX_STATUS_TX_DEFERRED           0x00000020
#define TX_STATUS_EX_COLL               0x00000010
#define TX_STATUS_TX_COLL_SHF           0
#define TX_STATUS_TX_COLL_MSK           (0xf << TX_STATUS_TX_COLL_SHF)

/* RECEIVE CONTROL register. */
#define RX_CTL_EN_GOOD                  0x00004000
#define RX_CTL_EN_RX_PAR                0x00002000
#define RX_CTL_EN_LONG_ERR              0x00000800
#define RX_CTL_EN_OVER                  0x00000400
#define RX_CTL_EN_CRC_ERR               0x00000200
#define RX_CTL_EN_ALIGN                 0x00000100
#define RX_CTL_IGNORE_CRC               0x00000040
#define RX_CTL_PASS_CTL                 0x00000020
#define RX_CTL_STRIP_CRC                0x00000010
#define RX_CTL_SHORT_EN                 0x00000008
#define RX_CTL_LONG_EN                  0x00000004
#define RX_CTL_RX_HALT                  0x00000002
#define RX_CTL_RX_EN                    0x00000001

/* RECEIVE STATUS register. */
#define RX_STATUS_RX_HALTED             0x00008000
#define RX_STATUS_GOOD                  0x00004000
#define RX_STATUS_RX_PAR                0x00002000
#define RX_STATUS_LONG_ERR              0x00000800
#define RX_STATUS_OVERFLOW              0x00000400
#define RX_STATUS_CRC_ERR               0x00000200
#define RX_STATUS_ALIGN_ERR             0x00000100
#define RX_STATUS_RX10_STAT             0x00000080
#define RX_STATUS_INT_RX                0x00000040
#define RX_STATUS_CTL_RECD              0x00000020

/* MD_CA register. */
#define MD_CA_PRE_SUP                   0x00001000
#define MD_CA_BUSY                      0x00000800
#define MD_CA_WR                        0x00000400
#define MD_CA_PHY_SHF                   5
#define MD_CA_PHY_MSK                   (0x1f << MD_CA_PHY_SHF)
#define MD_CA_ADDR_SHF                  0
#define MD_CA_ADDR_MSK                  (0x1f << MD_CA_ADDR_SHF)

/* Tx Status/Control. */
#define TX_STAT_CTL_OWNER_SHF           30
#define TX_STAT_CTL_OWNER_MSK           (0x3 << TX_STAT_CTL_OWNER_SHF)
#define TX_STAT_CTL_FRAME_SHF           27
#define TX_STAT_CTL_FRAME_MSK           (0x7 << TX_STAT_CTL_FRAME_SHF)
#define TX_STAT_CTL_STATUS_SHF          11
#define TX_STAT_CTL_STATUS_MSK          (0x1ffff << TX_STAT_CTL_STATUS_SHF)
#define TX_STAT_CTL_LENGTH_SHF          0
#define TX_STAT_CTL_LENGTH_MSK          (0x7ff << TX_STAT_CTL_LENGTH_SHF)

#define TX_STAT_CTL_ERROR_MSK           ((TX_STATUS_SQ_ERR      |     \
					  TX_STATUS_TX_HALTED   |     \
					  TX_STATUS_TX_PAR      |     \
					  TX_STATUS_LATE_COLL   |     \
					  TX_STATUS_L_CARR      |     \
					  TX_STATUS_EX_DEFER    |     \
					  TX_STATUS_UNDER       |     \
					  TX_STATUS_PAUSED      |     \
					  TX_STATUS_TX_DEFERRED |     \
					  TX_STATUS_EX_COLL     |     \
					  TX_STATUS_TX_COLL_MSK)      \
                                                    << TX_STAT_CTL_STATUS_SHF)
#define TX_STAT_CTL_INT_AFTER_TX        0x4

/* Rx Status/Control. */
#define RX_STAT_CTL_OWNER_SHF           30
#define RX_STAT_CTL_OWNER_MSK           (0x3 << RX_STAT_CTL_OWNER_SHF)
#define RX_STAT_CTL_STATUS_SHF          11
#define RX_STAT_CTL_STATUS_MSK          (0xffff << RX_STAT_CTL_STATUS_SHF)
#define RX_STAT_CTL_LENGTH_SHF          0
#define RX_STAT_CTL_LENGTH_MSK          (0x7ff << RX_STAT_CTL_LENGTH_SHF)


/* The SAA9730 (LAN) controller register map, as seen via the PCI-bus. */
#define SAA9730_LAN_REGS_ADDR   0x20400
#define SAA9730_LAN_REGS_SIZE   0x00400

struct lan_saa9730_regmap {
	volatile unsigned int TxBuffA;			/* 0x20400 */
	volatile unsigned int TxBuffB;			/* 0x20404 */
	volatile unsigned int RxBuffA;			/* 0x20408 */
	volatile unsigned int RxBuffB;			/* 0x2040c */
	volatile unsigned int PacketCount;		/* 0x20410 */
	volatile unsigned int Ok2Use;			/* 0x20414 */
	volatile unsigned int LanDmaCtl;		/* 0x20418 */
	volatile unsigned int Timeout;			/* 0x2041c */
	volatile unsigned int DmaStatus;		/* 0x20420 */
	volatile unsigned int DmaTest;			/* 0x20424 */
	volatile unsigned char filler20428[0x20430 - 0x20428];
	volatile unsigned int PauseCount;		/* 0x20430 */
	volatile unsigned int RemotePauseCount;		/* 0x20434 */
	volatile unsigned char filler20438[0x20440 - 0x20438];
	volatile unsigned int MacCtl;			/* 0x20440 */
	volatile unsigned int CamCtl;			/* 0x20444 */
	volatile unsigned int TxCtl;			/* 0x20448 */
	volatile unsigned int TxStatus;			/* 0x2044c */
	volatile unsigned int RxCtl;			/* 0x20450 */
	volatile unsigned int RxStatus;			/* 0x20454 */
	volatile unsigned int StationMgmtData;		/* 0x20458 */
	volatile unsigned int StationMgmtCtl;		/* 0x2045c */
	volatile unsigned int CamAddress;		/* 0x20460 */
	volatile unsigned int CamData;			/* 0x20464 */
	volatile unsigned int CamEnable;		/* 0x20468 */
	volatile unsigned char filler2046c[0x20500 - 0x2046c];
	volatile unsigned int DebugPCIMasterAddr;	/* 0x20500 */
	volatile unsigned int DebugLanTxStateMachine;	/* 0x20504 */
	volatile unsigned int DebugLanRxStateMachine;	/* 0x20508 */
	volatile unsigned int DebugLanTxFifoPointers;	/* 0x2050c */
	volatile unsigned int DebugLanRxFifoPointers;	/* 0x20510 */
	volatile unsigned int DebugLanCtlStateMachine;	/* 0x20514 */
};
typedef volatile struct lan_saa9730_regmap t_lan_saa9730_regmap;


/* EVM interrupt control registers. */
#define EVM_LAN_INT                     0x00010000
#define EVM_MASTER_EN                   0x00000001

/* The SAA9730 (EVM) controller register map, as seen via the PCI-bus. */
#define SAA9730_EVM_REGS_ADDR   0x02000
#define SAA9730_EVM_REGS_SIZE   0x00400

struct evm_saa9730_regmap {
	volatile unsigned int InterruptStatus1;		/* 0x2000 */
	volatile unsigned int InterruptEnable1;		/* 0x2004 */
	volatile unsigned int InterruptMonitor1;	/* 0x2008 */
	volatile unsigned int Counter;			/* 0x200c */
	volatile unsigned int CounterThreshold;		/* 0x2010 */
	volatile unsigned int CounterControl;		/* 0x2014 */
	volatile unsigned int GpioControl1;		/* 0x2018 */
	volatile unsigned int InterruptStatus2;		/* 0x201c */
	volatile unsigned int InterruptEnable2;		/* 0x2020 */
	volatile unsigned int InterruptMonitor2;	/* 0x2024 */
	volatile unsigned int GpioControl2;		/* 0x2028 */
	volatile unsigned int InterruptBlock1;		/* 0x202c */
	volatile unsigned int InterruptBlock2;		/* 0x2030 */
};
typedef volatile struct evm_saa9730_regmap t_evm_saa9730_regmap;


struct lan_saa9730_private {
	/*
	 * Rx/Tx packet buffers.
	 * The Rx and Tx packets must be PACKET_SIZE aligned.
	 */
	void		*buffer_start;
	unsigned int	buffer_size;

	/*
	 * DMA address of beginning of this object, returned
	 * by pci_alloc_consistent().
	 */
	dma_addr_t	dma_addr;

	/* Pointer to the associated pci device structure */
	struct pci_dev	*pci_dev;

	/* Pointer for the SAA9730 LAN controller register set. */
	t_lan_saa9730_regmap *lan_saa9730_regs;

	/* Pointer to the SAA9730 EVM register. */
	t_evm_saa9730_regmap *evm_saa9730_regs;

	/* Rcv buffer Index. */
	unsigned char NextRcvPacketIndex;
	/* Next buffer index. */
	unsigned char NextRcvBufferIndex;

	/* Index of next packet to use in that buffer. */
	unsigned char NextTxmPacketIndex;
	/* Next buffer index. */
	unsigned char NextTxmBufferIndex;

	/* Index of first pending packet ready to send. */
	unsigned char PendingTxmPacketIndex;
	/* Pending buffer index. */
	unsigned char PendingTxmBufferIndex;

	unsigned char DmaRcvPackets;
	unsigned char DmaTxmPackets;

	void	      *TxmBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_TXM_Q_SIZE];
	void	      *RcvBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_RCV_Q_SIZE];
	unsigned int TxBufferFree[LAN_SAA9730_BUFFERS];

	unsigned char PhysicalAddress[LAN_SAA9730_CAM_ENTRIES][6];

	struct net_device_stats stats;
	spinlock_t lock;
};

#endif /* _SAA9730_H */
Commit	Line	Data
1da177e4	1	/*
34454709 RB	2	* Copyright (C) 2000, 2005 MIPS Technologies, Inc. All rights reserved.
	3	* Authors: Carsten Langgaard <[email protected]>
	4	* Maciej W. Rozycki <[email protected]>
1da177e4 LT	5	*
	6	* ########################################################################
	7	*
	8	* This program is free software; you can distribute it and/or modify it
	9	* under the terms of the GNU General Public License (Version 2) as
	10	* published by the Free Software Foundation.
	11	*
	12	* This program is distributed in the hope it will be useful, but WITHOUT
	13	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	14	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
	15	* for more details.
	16	*
	17	* You should have received a copy of the GNU General Public License along
	18	* with this program; if not, write to the Free Software Foundation, Inc.,
	19	* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
	20	*
	21	* ########################################################################
	22	*
	23	* SAA9730 ethernet driver description.
	24	*
	25	*/
	26	#ifndef _SAA9730_H
	27	#define _SAA9730_H
	28
	29
	30	/* Number of 6-byte entries in the CAM. */
	31	#define LAN_SAA9730_CAM_ENTRIES 10
	32	#define LAN_SAA9730_CAM_DWORDS ((LAN_SAA9730_CAM_ENTRIES*6)/4)
	33
	34	/* TX and RX packet size: fixed to 2048 bytes, according to HW requirements. */
	35	#define LAN_SAA9730_PACKET_SIZE 2048
	36
6aa20a22 JG	37	/*
	38	* Number of TX buffers = number of RX buffers = 2, which is fixed according
	39	* to HW requirements.
1da177e4 LT	40	*/
	41	#define LAN_SAA9730_BUFFERS 2
	42
	43	/* Number of RX packets per RX buffer. */
	44	#define LAN_SAA9730_RCV_Q_SIZE 15
	45
	46	/* Number of TX packets per TX buffer. */
	47	#define LAN_SAA9730_TXM_Q_SIZE 15
	48
	49	/*
6aa20a22 JG	50	* We get an interrupt for each LAN_SAA9730_DEFAULT_RCV_Q_INT_THRESHOLD
6aa20a22 JG	51	* packets received.
1da177e4	52	* If however we receive less than LAN_SAA9730_DEFAULT_RCV_Q_INT_THRESHOLD
6aa20a22	53	* packets, the hardware can timeout after a certain time and still tell
1da177e4 LT	54	* us packets have arrived.
	55	* The timeout value in unit of 32 PCI clocks (33Mhz).
	56	* The value 200 approximates 0.0002 seconds.
	57	*/
	58	#define LAN_SAA9730_RCV_Q_INT_THRESHOLD 1
	59	#define LAN_SAA9730_DEFAULT_TIME_OUT_CNT 10
	60
	61	#define RXSF_NDIS 0
	62	#define RXSF_READY 2
	63	#define RXSF_HWDONE 3
	64
	65	#define TXSF_EMPTY 0
	66	#define TXSF_READY 2
	67	#define TXSF_HWDONE 3
	68
	69	#define LANEND_LITTLE 0
	70	#define LANEND_BIG_2143 1
	71	#define LANEND_BIG_4321 2
	72
	73	#define LANMB_ANY 0
	74	#define LANMB_8 1
	75	#define LANMB_32 2
	76	#define LANMB_64 3
	77
	78	#define MACCM_AUTOMATIC 0
	79	#define MACCM_10MB 1
	80	#define MACCM_MII 2
	81
6aa20a22 JG	82	/*
6aa20a22 JG	83	* PHY definitions for Basic registers of QS6612 (used on MIPS ATLAS board)
1da177e4 LT	84	*/
	85	#define PHY_CONTROL 0x0
	86	#define PHY_STATUS 0x1
	87	#define PHY_STATUS_LINK_UP 0x4
	88	#define PHY_CONTROL_RESET 0x8000
	89	#define PHY_CONTROL_AUTO_NEG 0x1000
	90	#define PHY_CONTROL_RESTART_AUTO_NEG 0x0200
	91	#define PHY_ADDRESS 0x0
	92
	93	/* PK_COUNT register. */
	94	#define PK_COUNT_TX_A_SHF 24
	95	#define PK_COUNT_TX_A_MSK (0xff << PK_COUNT_TX_A_SHF)
	96	#define PK_COUNT_TX_B_SHF 16
	97	#define PK_COUNT_TX_B_MSK (0xff << PK_COUNT_TX_B_SHF)
	98	#define PK_COUNT_RX_A_SHF 8
	99	#define PK_COUNT_RX_A_MSK (0xff << PK_COUNT_RX_A_SHF)
	100	#define PK_COUNT_RX_B_SHF 0
	101	#define PK_COUNT_RX_B_MSK (0xff << PK_COUNT_RX_B_SHF)
	102
	103	/* OK2USE register. */
	104	#define OK2USE_TX_A 0x8
	105	#define OK2USE_TX_B 0x4
	106	#define OK2USE_RX_A 0x2
	107	#define OK2USE_RX_B 0x1
	108
	109	/* LAN DMA CONTROL register. */
	110	#define DMA_CTL_BLK_INT 0x80000000
	111	#define DMA_CTL_MAX_XFER_SHF 18
	112	#define DMA_CTL_MAX_XFER_MSK (0x3 << LAN_DMA_CTL_MAX_XFER_SHF)
	113	#define DMA_CTL_ENDIAN_SHF 16
	114	#define DMA_CTL_ENDIAN_MSK (0x3 << LAN_DMA_CTL_ENDIAN_SHF)
	115	#define DMA_CTL_RX_INT_COUNT_SHF 8
	116	#define DMA_CTL_RX_INT_COUNT_MSK (0xff << LAN_DMA_CTL_RX_INT_COUNT_SHF)
	117	#define DMA_CTL_EN_TX_DMA 0x00000080
	118	#define DMA_CTL_EN_RX_DMA 0x00000040
	119	#define DMA_CTL_RX_INT_BUFFUL_EN 0x00000020
	120	#define DMA_CTL_RX_INT_TO_EN 0x00000010
	121	#define DMA_CTL_RX_INT_EN 0x00000008
	122	#define DMA_CTL_TX_INT_EN 0x00000004
	123	#define DMA_CTL_MAC_TX_INT_EN 0x00000002
	124	#define DMA_CTL_MAC_RX_INT_EN 0x00000001
	125
	126	/* DMA STATUS register. */
	127	#define DMA_STATUS_BAD_ADDR_SHF 16
	128	#define DMA_STATUS_BAD_ADDR_MSK (0xf << DMA_STATUS_BAD_ADDR_SHF)
	129	#define DMA_STATUS_RX_PKTS_RECEIVED_SHF 8
	130	#define DMA_STATUS_RX_PKTS_RECEIVED_MSK (0xff << DMA_STATUS_RX_PKTS_RECEIVED_SHF)
	131	#define DMA_STATUS_TX_EN_SYNC 0x00000080
	132	#define DMA_STATUS_RX_BUF_A_FUL 0x00000040
	133	#define DMA_STATUS_RX_BUF_B_FUL 0x00000020
	134	#define DMA_STATUS_RX_TO_INT 0x00000010
	135	#define DMA_STATUS_RX_INT 0x00000008
	136	#define DMA_STATUS_TX_INT 0x00000004
	137	#define DMA_STATUS_MAC_TX_INT 0x00000002
	138	#define DMA_STATUS_MAC_RX_INT 0x00000001
	139
	140	/* DMA TEST/PANIC SWITHES register. */
	141	#define DMA_TEST_LOOPBACK 0x01000000
	142	#define DMA_TEST_SW_RESET 0x00000001
	143
	144	/* MAC CONTROL register. */
	145	#define MAC_CONTROL_EN_MISS_ROLL 0x00002000
	146	#define MAC_CONTROL_MISS_ROLL 0x00000400
	147	#define MAC_CONTROL_LOOP10 0x00000080
148	#define MAC_CONTROL_CONN_SHF 5
149	#define MAC_CONTROL_CONN_MSK (0x3 << MAC_CONTROL_CONN_SHF)
150	#define MAC_CONTROL_MAC_LOOP 0x00000010
151	#define MAC_CONTROL_FULL_DUP 0x00000008
152	#define MAC_CONTROL_RESET 0x00000004
153	#define MAC_CONTROL_HALT_IMM 0x00000002
154	#define MAC_CONTROL_HALT_REQ 0x00000001
155
156	/* CAM CONTROL register. */
157	#define CAM_CONTROL_COMP_EN 0x00000010
158	#define CAM_CONTROL_NEG_CAM 0x00000008
159	#define CAM_CONTROL_BROAD_ACC 0x00000004
160	#define CAM_CONTROL_GROUP_ACC 0x00000002
161	#define CAM_CONTROL_STATION_ACC 0x00000001
162
163	/* TRANSMIT CONTROL register. */
164	#define TX_CTL_EN_COMP 0x00004000
165	#define TX_CTL_EN_TX_PAR 0x00002000
166	#define TX_CTL_EN_LATE_COLL 0x00001000
167	#define TX_CTL_EN_EX_COLL 0x00000800
168	#define TX_CTL_EN_L_CARR 0x00000400
169	#define TX_CTL_EN_EX_DEFER 0x00000200
170	#define TX_CTL_EN_UNDER 0x00000100
171	#define TX_CTL_MII10 0x00000080
172	#define TX_CTL_SD_PAUSE 0x00000040
173	#define TX_CTL_NO_EX_DEF0 0x00000020
174	#define TX_CTL_F_BACK 0x00000010
175	#define TX_CTL_NO_CRC 0x00000008
176	#define TX_CTL_NO_PAD 0x00000004
177	#define TX_CTL_TX_HALT 0x00000002
178	#define TX_CTL_TX_EN 0x00000001
179
180	/* TRANSMIT STATUS register. */
181	#define TX_STATUS_SQ_ERR 0x00010000
182	#define TX_STATUS_TX_HALTED 0x00008000
183	#define TX_STATUS_COMP 0x00004000
184	#define TX_STATUS_TX_PAR 0x00002000
185	#define TX_STATUS_LATE_COLL 0x00001000
186	#define TX_STATUS_TX10_STAT 0x00000800
187	#define TX_STATUS_L_CARR 0x00000400
188	#define TX_STATUS_EX_DEFER 0x00000200
189	#define TX_STATUS_UNDER 0x00000100
190	#define TX_STATUS_IN_TX 0x00000080
191	#define TX_STATUS_PAUSED 0x00000040
192	#define TX_STATUS_TX_DEFERRED 0x00000020
193	#define TX_STATUS_EX_COLL 0x00000010
194	#define TX_STATUS_TX_COLL_SHF 0
195	#define TX_STATUS_TX_COLL_MSK (0xf << TX_STATUS_TX_COLL_SHF)
196
197	/* RECEIVE CONTROL register. */
198	#define RX_CTL_EN_GOOD 0x00004000
199	#define RX_CTL_EN_RX_PAR 0x00002000
200	#define RX_CTL_EN_LONG_ERR 0x00000800
201	#define RX_CTL_EN_OVER 0x00000400
202	#define RX_CTL_EN_CRC_ERR 0x00000200
203	#define RX_CTL_EN_ALIGN 0x00000100
204	#define RX_CTL_IGNORE_CRC 0x00000040
205	#define RX_CTL_PASS_CTL 0x00000020
206	#define RX_CTL_STRIP_CRC 0x00000010
207	#define RX_CTL_SHORT_EN 0x00000008
208	#define RX_CTL_LONG_EN 0x00000004
209	#define RX_CTL_RX_HALT 0x00000002
210	#define RX_CTL_RX_EN 0x00000001
211
212	/* RECEIVE STATUS register. */
213	#define RX_STATUS_RX_HALTED 0x00008000
214	#define RX_STATUS_GOOD 0x00004000
215	#define RX_STATUS_RX_PAR 0x00002000
216	#define RX_STATUS_LONG_ERR 0x00000800
217	#define RX_STATUS_OVERFLOW 0x00000400
218	#define RX_STATUS_CRC_ERR 0x00000200
219	#define RX_STATUS_ALIGN_ERR 0x00000100
220	#define RX_STATUS_RX10_STAT 0x00000080
221	#define RX_STATUS_INT_RX 0x00000040
222	#define RX_STATUS_CTL_RECD 0x00000020
223
224	/* MD_CA register. */
225	#define MD_CA_PRE_SUP 0x00001000
226	#define MD_CA_BUSY 0x00000800
227	#define MD_CA_WR 0x00000400
228	#define MD_CA_PHY_SHF 5
229	#define MD_CA_PHY_MSK (0x1f << MD_CA_PHY_SHF)
230	#define MD_CA_ADDR_SHF 0
231	#define MD_CA_ADDR_MSK (0x1f << MD_CA_ADDR_SHF)
232
233	/* Tx Status/Control. */
234	#define TX_STAT_CTL_OWNER_SHF 30
235	#define TX_STAT_CTL_OWNER_MSK (0x3 << TX_STAT_CTL_OWNER_SHF)
236	#define TX_STAT_CTL_FRAME_SHF 27
237	#define TX_STAT_CTL_FRAME_MSK (0x7 << TX_STAT_CTL_FRAME_SHF)
238	#define TX_STAT_CTL_STATUS_SHF 11
239	#define TX_STAT_CTL_STATUS_MSK (0x1ffff << TX_STAT_CTL_STATUS_SHF)
240	#define TX_STAT_CTL_LENGTH_SHF 0
241	#define TX_STAT_CTL_LENGTH_MSK (0x7ff << TX_STAT_CTL_LENGTH_SHF)
242
243	#define TX_STAT_CTL_ERROR_MSK ((TX_STATUS_SQ_ERR \| \
244	TX_STATUS_TX_HALTED \| \
245	TX_STATUS_TX_PAR \| \
246	TX_STATUS_LATE_COLL \| \
247	TX_STATUS_L_CARR \| \
248	TX_STATUS_EX_DEFER \| \
249	TX_STATUS_UNDER \| \
250	TX_STATUS_PAUSED \| \
251	TX_STATUS_TX_DEFERRED \| \
252	TX_STATUS_EX_COLL \| \
253	TX_STATUS_TX_COLL_MSK) \
254	<< TX_STAT_CTL_STATUS_SHF)
255	#define TX_STAT_CTL_INT_AFTER_TX 0x4
256
257	/* Rx Status/Control. */
258	#define RX_STAT_CTL_OWNER_SHF 30
259	#define RX_STAT_CTL_OWNER_MSK (0x3 << RX_STAT_CTL_OWNER_SHF)
260	#define RX_STAT_CTL_STATUS_SHF 11
261	#define RX_STAT_CTL_STATUS_MSK (0xffff << RX_STAT_CTL_STATUS_SHF)
262	#define RX_STAT_CTL_LENGTH_SHF 0
263	#define RX_STAT_CTL_LENGTH_MSK (0x7ff << RX_STAT_CTL_LENGTH_SHF)
264
265
266
267	/* The SAA9730 (LAN) controller register map, as seen via the PCI-bus. */
268	#define SAA9730_LAN_REGS_ADDR 0x20400
34454709	269	#define SAA9730_LAN_REGS_SIZE 0x00400
1da177e4 LT	270
	271	struct lan_saa9730_regmap {
	272	volatile unsigned int TxBuffA; /* 0x20400 */
	273	volatile unsigned int TxBuffB; /* 0x20404 */
	274	volatile unsigned int RxBuffA; /* 0x20408 */
	275	volatile unsigned int RxBuffB; /* 0x2040c */
	276	volatile unsigned int PacketCount; /* 0x20410 */
	277	volatile unsigned int Ok2Use; /* 0x20414 */
	278	volatile unsigned int LanDmaCtl; /* 0x20418 */
	279	volatile unsigned int Timeout; /* 0x2041c */
	280	volatile unsigned int DmaStatus; /* 0x20420 */
	281	volatile unsigned int DmaTest; /* 0x20424 */
	282	volatile unsigned char filler20428[0x20430 - 0x20428];
	283	volatile unsigned int PauseCount; /* 0x20430 */
	284	volatile unsigned int RemotePauseCount; /* 0x20434 */
	285	volatile unsigned char filler20438[0x20440 - 0x20438];
	286	volatile unsigned int MacCtl; /* 0x20440 */
	287	volatile unsigned int CamCtl; /* 0x20444 */
	288	volatile unsigned int TxCtl; /* 0x20448 */
	289	volatile unsigned int TxStatus; /* 0x2044c */
	290	volatile unsigned int RxCtl; /* 0x20450 */
	291	volatile unsigned int RxStatus; /* 0x20454 */
	292	volatile unsigned int StationMgmtData; /* 0x20458 */
	293	volatile unsigned int StationMgmtCtl; /* 0x2045c */
	294	volatile unsigned int CamAddress; /* 0x20460 */
	295	volatile unsigned int CamData; /* 0x20464 */
	296	volatile unsigned int CamEnable; /* 0x20468 */
	297	volatile unsigned char filler2046c[0x20500 - 0x2046c];
	298	volatile unsigned int DebugPCIMasterAddr; /* 0x20500 */
	299	volatile unsigned int DebugLanTxStateMachine; /* 0x20504 */
	300	volatile unsigned int DebugLanRxStateMachine; /* 0x20508 */
	301	volatile unsigned int DebugLanTxFifoPointers; /* 0x2050c */
	302	volatile unsigned int DebugLanRxFifoPointers; /* 0x20510 */
	303	volatile unsigned int DebugLanCtlStateMachine; /* 0x20514 */
	304	};
	305	typedef volatile struct lan_saa9730_regmap t_lan_saa9730_regmap;
	306
	307
	308	/* EVM interrupt control registers. */
	309	#define EVM_LAN_INT 0x00010000
	310	#define EVM_MASTER_EN 0x00000001
	311
	312	/* The SAA9730 (EVM) controller register map, as seen via the PCI-bus. */
	313	#define SAA9730_EVM_REGS_ADDR 0x02000
34454709	314	#define SAA9730_EVM_REGS_SIZE 0x00400
1da177e4 LT	315
	316	struct evm_saa9730_regmap {
	317	volatile unsigned int InterruptStatus1; /* 0x2000 */
	318	volatile unsigned int InterruptEnable1; /* 0x2004 */
	319	volatile unsigned int InterruptMonitor1; /* 0x2008 */
	320	volatile unsigned int Counter; /* 0x200c */
	321	volatile unsigned int CounterThreshold; /* 0x2010 */
	322	volatile unsigned int CounterControl; /* 0x2014 */
	323	volatile unsigned int GpioControl1; /* 0x2018 */
	324	volatile unsigned int InterruptStatus2; /* 0x201c */
	325	volatile unsigned int InterruptEnable2; /* 0x2020 */
	326	volatile unsigned int InterruptMonitor2; /* 0x2024 */
	327	volatile unsigned int GpioControl2; /* 0x2028 */
	328	volatile unsigned int InterruptBlock1; /* 0x202c */
	329	volatile unsigned int InterruptBlock2; /* 0x2030 */
	330	};
	331	typedef volatile struct evm_saa9730_regmap t_evm_saa9730_regmap;
	332
	333
	334	struct lan_saa9730_private {
34454709 RB	335	/*
	336	* Rx/Tx packet buffers.
	337	* The Rx and Tx packets must be PACKET_SIZE aligned.
	338	*/
	339	void *buffer_start;
	340	unsigned int buffer_size;
	341
	342	/*
	343	* DMA address of beginning of this object, returned
	344	* by pci_alloc_consistent().
	345	*/
	346	dma_addr_t dma_addr;
	347
	348	/* Pointer to the associated pci device structure */
	349	struct pci_dev *pci_dev;
	350
1da177e4 LT	351	/* Pointer for the SAA9730 LAN controller register set. */
	352	t_lan_saa9730_regmap *lan_saa9730_regs;
	353
	354	/* Pointer to the SAA9730 EVM register. */
	355	t_evm_saa9730_regmap *evm_saa9730_regs;
	356
1da177e4 LT	357	/* Rcv buffer Index. */
1da177e4 LT	358	unsigned char NextRcvPacketIndex;
34454709 RB	359	/* Next buffer index. */
34454709 RB	360	unsigned char NextRcvBufferIndex;
1da177e4 LT	361
	362	/* Index of next packet to use in that buffer. */
	363	unsigned char NextTxmPacketIndex;
	364	/* Next buffer index. */
	365	unsigned char NextTxmBufferIndex;
	366
	367	/* Index of first pending packet ready to send. */
	368	unsigned char PendingTxmPacketIndex;
	369	/* Pending buffer index. */
	370	unsigned char PendingTxmBufferIndex;
	371
	372	unsigned char DmaRcvPackets;
	373	unsigned char DmaTxmPackets;
	374
34454709 RB	375	void *TxmBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_TXM_Q_SIZE];
34454709 RB	376	void *RcvBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_RCV_Q_SIZE];
1da177e4 LT	377	unsigned int TxBufferFree[LAN_SAA9730_BUFFERS];
	378
	379	unsigned char PhysicalAddress[LAN_SAA9730_CAM_ENTRIES][6];
	380
	381	struct net_device_stats stats;
	382	spinlock_t lock;
	383	};
	384
	385	#endif /* _SAA9730_H */