]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/drivers/acorn/net/ether1.c | |
3 | * | |
4 | * Copyright (C) 1996-2000 Russell King | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License version 2 as | |
8 | * published by the Free Software Foundation. | |
9 | * | |
10 | * Acorn ether1 driver (82586 chip) for Acorn machines | |
11 | * | |
12 | * We basically keep two queues in the cards memory - one for transmit | |
13 | * and one for receive. Each has a head and a tail. The head is where | |
14 | * we/the chip adds packets to be transmitted/received, and the tail | |
15 | * is where the transmitter has got to/where the receiver will stop. | |
16 | * Both of these queues are circular, and since the chip is running | |
17 | * all the time, we have to be careful when we modify the pointers etc | |
18 | * so that the buffer memory contents is valid all the time. | |
19 | * | |
20 | * Change log: | |
21 | * 1.00 RMK Released | |
22 | * 1.01 RMK 19/03/1996 Transfers the last odd byte onto/off of the card now. | |
23 | * 1.02 RMK 25/05/1997 Added code to restart RU if it goes not ready | |
24 | * 1.03 RMK 14/09/1997 Cleaned up the handling of a reset during the TX interrupt. | |
25 | * Should prevent lockup. | |
26 | * 1.04 RMK 17/09/1997 Added more info when initialsation of chip goes wrong. | |
27 | * TDR now only reports failure when chip reports non-zero | |
28 | * TDR time-distance. | |
29 | * 1.05 RMK 31/12/1997 Removed calls to dev_tint for 2.1 | |
30 | * 1.06 RMK 10/02/2000 Updated for 2.3.43 | |
31 | * 1.07 RMK 13/05/2000 Updated for 2.3.99-pre8 | |
32 | */ | |
33 | ||
34 | #include <linux/module.h> | |
35 | #include <linux/kernel.h> | |
1da177e4 LT |
36 | #include <linux/types.h> |
37 | #include <linux/fcntl.h> | |
38 | #include <linux/interrupt.h> | |
1da177e4 LT |
39 | #include <linux/ioport.h> |
40 | #include <linux/in.h> | |
41 | #include <linux/slab.h> | |
42 | #include <linux/string.h> | |
43 | #include <linux/errno.h> | |
44 | #include <linux/device.h> | |
45 | #include <linux/init.h> | |
46 | #include <linux/netdevice.h> | |
47 | #include <linux/etherdevice.h> | |
48 | #include <linux/skbuff.h> | |
49 | #include <linux/bitops.h> | |
50 | ||
51 | #include <asm/system.h> | |
52 | #include <asm/io.h> | |
53 | #include <asm/dma.h> | |
54 | #include <asm/ecard.h> | |
55 | ||
56 | #define __ETHER1_C | |
57 | #include "ether1.h" | |
58 | ||
59 | static unsigned int net_debug = NET_DEBUG; | |
60 | ||
61 | #define BUFFER_SIZE 0x10000 | |
62 | #define TX_AREA_START 0x00100 | |
63 | #define TX_AREA_END 0x05000 | |
64 | #define RX_AREA_START 0x05000 | |
65 | #define RX_AREA_END 0x0fc00 | |
66 | ||
67 | static int ether1_open(struct net_device *dev); | |
68 | static int ether1_sendpacket(struct sk_buff *skb, struct net_device *dev); | |
7d12e780 | 69 | static irqreturn_t ether1_interrupt(int irq, void *dev_id); |
1da177e4 LT |
70 | static int ether1_close(struct net_device *dev); |
71 | static struct net_device_stats *ether1_getstats(struct net_device *dev); | |
72 | static void ether1_setmulticastlist(struct net_device *dev); | |
73 | static void ether1_timeout(struct net_device *dev); | |
74 | ||
75 | /* ------------------------------------------------------------------------- */ | |
76 | ||
07ed3131 | 77 | static char version[] __devinitdata = "ether1 ethernet driver (c) 2000 Russell King v1.07\n"; |
1da177e4 LT |
78 | |
79 | #define BUS_16 16 | |
80 | #define BUS_8 8 | |
81 | ||
82 | /* ------------------------------------------------------------------------- */ | |
83 | ||
84 | #define DISABLEIRQS 1 | |
85 | #define NORMALIRQS 0 | |
86 | ||
87 | #define ether1_readw(dev, addr, type, offset, svflgs) ether1_inw_p (dev, addr + (int)(&((type *)0)->offset), svflgs) | |
88 | #define ether1_writew(dev, val, addr, type, offset, svflgs) ether1_outw_p (dev, val, addr + (int)(&((type *)0)->offset), svflgs) | |
89 | ||
90 | static inline unsigned short | |
91 | ether1_inw_p (struct net_device *dev, int addr, int svflgs) | |
92 | { | |
93 | unsigned long flags; | |
94 | unsigned short ret; | |
95 | ||
96 | if (svflgs) | |
97 | local_irq_save (flags); | |
98 | ||
99 | writeb(addr >> 12, REG_PAGE); | |
100 | ret = readw(ETHER1_RAM + ((addr & 4095) << 1)); | |
101 | if (svflgs) | |
102 | local_irq_restore (flags); | |
103 | return ret; | |
104 | } | |
105 | ||
106 | static inline void | |
107 | ether1_outw_p (struct net_device *dev, unsigned short val, int addr, int svflgs) | |
108 | { | |
109 | unsigned long flags; | |
110 | ||
111 | if (svflgs) | |
112 | local_irq_save (flags); | |
113 | ||
114 | writeb(addr >> 12, REG_PAGE); | |
115 | writew(val, ETHER1_RAM + ((addr & 4095) << 1)); | |
116 | if (svflgs) | |
117 | local_irq_restore (flags); | |
118 | } | |
119 | ||
120 | /* | |
121 | * Some inline assembler to allow fast transfers on to/off of the card. | |
122 | * Since this driver depends on some features presented by the ARM | |
123 | * specific architecture, and that you can't configure this driver | |
124 | * without specifiing ARM mode, this is not a problem. | |
125 | * | |
126 | * This routine is essentially an optimised memcpy from the card's | |
127 | * onboard RAM to kernel memory. | |
128 | */ | |
129 | static void | |
130 | ether1_writebuffer (struct net_device *dev, void *data, unsigned int start, unsigned int length) | |
131 | { | |
132 | unsigned int page, thislen, offset; | |
133 | void __iomem *addr; | |
134 | ||
135 | offset = start & 4095; | |
136 | page = start >> 12; | |
137 | addr = ETHER1_RAM + (offset << 1); | |
138 | ||
139 | if (offset + length > 4096) | |
140 | thislen = 4096 - offset; | |
141 | else | |
142 | thislen = length; | |
143 | ||
144 | do { | |
145 | int used; | |
146 | ||
147 | writeb(page, REG_PAGE); | |
148 | length -= thislen; | |
149 | ||
150 | __asm__ __volatile__( | |
151 | "subs %3, %3, #2\n\ | |
152 | bmi 2f\n\ | |
153 | 1: ldr %0, [%1], #2\n\ | |
154 | mov %0, %0, lsl #16\n\ | |
155 | orr %0, %0, %0, lsr #16\n\ | |
156 | str %0, [%2], #4\n\ | |
157 | subs %3, %3, #2\n\ | |
158 | bmi 2f\n\ | |
159 | ldr %0, [%1], #2\n\ | |
160 | mov %0, %0, lsl #16\n\ | |
161 | orr %0, %0, %0, lsr #16\n\ | |
162 | str %0, [%2], #4\n\ | |
163 | subs %3, %3, #2\n\ | |
164 | bmi 2f\n\ | |
165 | ldr %0, [%1], #2\n\ | |
166 | mov %0, %0, lsl #16\n\ | |
167 | orr %0, %0, %0, lsr #16\n\ | |
168 | str %0, [%2], #4\n\ | |
169 | subs %3, %3, #2\n\ | |
170 | bmi 2f\n\ | |
171 | ldr %0, [%1], #2\n\ | |
172 | mov %0, %0, lsl #16\n\ | |
173 | orr %0, %0, %0, lsr #16\n\ | |
174 | str %0, [%2], #4\n\ | |
175 | subs %3, %3, #2\n\ | |
176 | bpl 1b\n\ | |
177 | 2: adds %3, %3, #1\n\ | |
178 | ldreqb %0, [%1]\n\ | |
179 | streqb %0, [%2]" | |
180 | : "=&r" (used), "=&r" (data) | |
181 | : "r" (addr), "r" (thislen), "1" (data)); | |
182 | ||
183 | addr = ETHER1_RAM; | |
184 | ||
185 | thislen = length; | |
186 | if (thislen > 4096) | |
187 | thislen = 4096; | |
188 | page++; | |
189 | } while (thislen); | |
190 | } | |
191 | ||
192 | static void | |
193 | ether1_readbuffer (struct net_device *dev, void *data, unsigned int start, unsigned int length) | |
194 | { | |
195 | unsigned int page, thislen, offset; | |
196 | void __iomem *addr; | |
197 | ||
198 | offset = start & 4095; | |
199 | page = start >> 12; | |
200 | addr = ETHER1_RAM + (offset << 1); | |
201 | ||
202 | if (offset + length > 4096) | |
203 | thislen = 4096 - offset; | |
204 | else | |
205 | thislen = length; | |
206 | ||
207 | do { | |
208 | int used; | |
209 | ||
210 | writeb(page, REG_PAGE); | |
211 | length -= thislen; | |
212 | ||
213 | __asm__ __volatile__( | |
214 | "subs %3, %3, #2\n\ | |
215 | bmi 2f\n\ | |
216 | 1: ldr %0, [%2], #4\n\ | |
217 | strb %0, [%1], #1\n\ | |
218 | mov %0, %0, lsr #8\n\ | |
219 | strb %0, [%1], #1\n\ | |
220 | subs %3, %3, #2\n\ | |
221 | bmi 2f\n\ | |
222 | ldr %0, [%2], #4\n\ | |
223 | strb %0, [%1], #1\n\ | |
224 | mov %0, %0, lsr #8\n\ | |
225 | strb %0, [%1], #1\n\ | |
226 | subs %3, %3, #2\n\ | |
227 | bmi 2f\n\ | |
228 | ldr %0, [%2], #4\n\ | |
229 | strb %0, [%1], #1\n\ | |
230 | mov %0, %0, lsr #8\n\ | |
231 | strb %0, [%1], #1\n\ | |
232 | subs %3, %3, #2\n\ | |
233 | bmi 2f\n\ | |
234 | ldr %0, [%2], #4\n\ | |
235 | strb %0, [%1], #1\n\ | |
236 | mov %0, %0, lsr #8\n\ | |
237 | strb %0, [%1], #1\n\ | |
238 | subs %3, %3, #2\n\ | |
239 | bpl 1b\n\ | |
240 | 2: adds %3, %3, #1\n\ | |
241 | ldreqb %0, [%2]\n\ | |
242 | streqb %0, [%1]" | |
243 | : "=&r" (used), "=&r" (data) | |
244 | : "r" (addr), "r" (thislen), "1" (data)); | |
245 | ||
246 | addr = ETHER1_RAM; | |
247 | ||
248 | thislen = length; | |
249 | if (thislen > 4096) | |
250 | thislen = 4096; | |
251 | page++; | |
252 | } while (thislen); | |
253 | } | |
254 | ||
bffa2154 | 255 | static int __devinit |
1da177e4 LT |
256 | ether1_ramtest(struct net_device *dev, unsigned char byte) |
257 | { | |
258 | unsigned char *buffer = kmalloc (BUFFER_SIZE, GFP_KERNEL); | |
259 | int i, ret = BUFFER_SIZE; | |
260 | int max_errors = 15; | |
261 | int bad = -1; | |
262 | int bad_start = 0; | |
263 | ||
264 | if (!buffer) | |
265 | return 1; | |
266 | ||
267 | memset (buffer, byte, BUFFER_SIZE); | |
268 | ether1_writebuffer (dev, buffer, 0, BUFFER_SIZE); | |
269 | memset (buffer, byte ^ 0xff, BUFFER_SIZE); | |
270 | ether1_readbuffer (dev, buffer, 0, BUFFER_SIZE); | |
271 | ||
272 | for (i = 0; i < BUFFER_SIZE; i++) { | |
273 | if (buffer[i] != byte) { | |
274 | if (max_errors >= 0 && bad != buffer[i]) { | |
275 | if (bad != -1) | |
276 | printk ("\n"); | |
277 | printk (KERN_CRIT "%s: RAM failed with (%02X instead of %02X) at 0x%04X", | |
278 | dev->name, buffer[i], byte, i); | |
279 | ret = -ENODEV; | |
280 | max_errors --; | |
281 | bad = buffer[i]; | |
282 | bad_start = i; | |
283 | } | |
284 | } else { | |
285 | if (bad != -1) { | |
286 | if (bad_start == i - 1) | |
287 | printk ("\n"); | |
288 | else | |
289 | printk (" - 0x%04X\n", i - 1); | |
290 | bad = -1; | |
291 | } | |
292 | } | |
293 | } | |
294 | ||
295 | if (bad != -1) | |
296 | printk (" - 0x%04X\n", BUFFER_SIZE); | |
297 | kfree (buffer); | |
298 | ||
299 | return ret; | |
300 | } | |
301 | ||
302 | static int | |
303 | ether1_reset (struct net_device *dev) | |
304 | { | |
305 | writeb(CTRL_RST|CTRL_ACK, REG_CONTROL); | |
306 | return BUS_16; | |
307 | } | |
308 | ||
bffa2154 | 309 | static int __devinit |
1da177e4 LT |
310 | ether1_init_2(struct net_device *dev) |
311 | { | |
312 | int i; | |
313 | dev->mem_start = 0; | |
314 | ||
315 | i = ether1_ramtest (dev, 0x5a); | |
316 | ||
317 | if (i > 0) | |
318 | i = ether1_ramtest (dev, 0x1e); | |
319 | ||
320 | if (i <= 0) | |
321 | return -ENODEV; | |
322 | ||
323 | dev->mem_end = i; | |
324 | return 0; | |
325 | } | |
326 | ||
327 | /* | |
328 | * These are the structures that are loaded into the ether RAM card to | |
329 | * initialise the 82586 | |
330 | */ | |
331 | ||
332 | /* at 0x0100 */ | |
333 | #define NOP_ADDR (TX_AREA_START) | |
334 | #define NOP_SIZE (0x06) | |
335 | static nop_t init_nop = { | |
336 | 0, | |
337 | CMD_NOP, | |
338 | NOP_ADDR | |
339 | }; | |
340 | ||
341 | /* at 0x003a */ | |
342 | #define TDR_ADDR (0x003a) | |
343 | #define TDR_SIZE (0x08) | |
344 | static tdr_t init_tdr = { | |
345 | 0, | |
346 | CMD_TDR | CMD_INTR, | |
347 | NOP_ADDR, | |
348 | 0 | |
349 | }; | |
350 | ||
351 | /* at 0x002e */ | |
352 | #define MC_ADDR (0x002e) | |
353 | #define MC_SIZE (0x0c) | |
354 | static mc_t init_mc = { | |
355 | 0, | |
356 | CMD_SETMULTICAST, | |
357 | TDR_ADDR, | |
358 | 0, | |
359 | { { 0, } } | |
360 | }; | |
361 | ||
362 | /* at 0x0022 */ | |
363 | #define SA_ADDR (0x0022) | |
364 | #define SA_SIZE (0x0c) | |
365 | static sa_t init_sa = { | |
366 | 0, | |
367 | CMD_SETADDRESS, | |
368 | MC_ADDR, | |
369 | { 0, } | |
370 | }; | |
371 | ||
372 | /* at 0x0010 */ | |
373 | #define CFG_ADDR (0x0010) | |
374 | #define CFG_SIZE (0x12) | |
375 | static cfg_t init_cfg = { | |
376 | 0, | |
377 | CMD_CONFIG, | |
378 | SA_ADDR, | |
379 | 8, | |
380 | 8, | |
381 | CFG8_SRDY, | |
382 | CFG9_PREAMB8 | CFG9_ADDRLENBUF | CFG9_ADDRLEN(6), | |
383 | 0, | |
384 | 0x60, | |
385 | 0, | |
386 | CFG13_RETRY(15) | CFG13_SLOTH(2), | |
387 | 0, | |
388 | }; | |
389 | ||
390 | /* at 0x0000 */ | |
391 | #define SCB_ADDR (0x0000) | |
392 | #define SCB_SIZE (0x10) | |
393 | static scb_t init_scb = { | |
394 | 0, | |
395 | SCB_CMDACKRNR | SCB_CMDACKCNA | SCB_CMDACKFR | SCB_CMDACKCX, | |
396 | CFG_ADDR, | |
397 | RX_AREA_START, | |
398 | 0, | |
399 | 0, | |
400 | 0, | |
401 | 0 | |
402 | }; | |
403 | ||
404 | /* at 0xffee */ | |
405 | #define ISCP_ADDR (0xffee) | |
406 | #define ISCP_SIZE (0x08) | |
407 | static iscp_t init_iscp = { | |
408 | 1, | |
409 | SCB_ADDR, | |
410 | 0x0000, | |
411 | 0x0000 | |
412 | }; | |
413 | ||
414 | /* at 0xfff6 */ | |
415 | #define SCP_ADDR (0xfff6) | |
416 | #define SCP_SIZE (0x0a) | |
417 | static scp_t init_scp = { | |
418 | SCP_SY_16BBUS, | |
419 | { 0, 0 }, | |
420 | ISCP_ADDR, | |
421 | 0 | |
422 | }; | |
423 | ||
424 | #define RFD_SIZE (0x16) | |
425 | static rfd_t init_rfd = { | |
426 | 0, | |
427 | 0, | |
428 | 0, | |
429 | 0, | |
430 | { 0, }, | |
431 | { 0, }, | |
432 | 0 | |
433 | }; | |
434 | ||
435 | #define RBD_SIZE (0x0a) | |
436 | static rbd_t init_rbd = { | |
437 | 0, | |
438 | 0, | |
439 | 0, | |
440 | 0, | |
441 | ETH_FRAME_LEN + 8 | |
442 | }; | |
443 | ||
444 | #define TX_SIZE (0x08) | |
445 | #define TBD_SIZE (0x08) | |
446 | ||
447 | static int | |
448 | ether1_init_for_open (struct net_device *dev) | |
449 | { | |
450 | int i, status, addr, next, next2; | |
451 | int failures = 0; | |
452 | unsigned long timeout; | |
453 | ||
454 | writeb(CTRL_RST|CTRL_ACK, REG_CONTROL); | |
455 | ||
456 | for (i = 0; i < 6; i++) | |
457 | init_sa.sa_addr[i] = dev->dev_addr[i]; | |
458 | ||
459 | /* load data structures into ether1 RAM */ | |
460 | ether1_writebuffer (dev, &init_scp, SCP_ADDR, SCP_SIZE); | |
461 | ether1_writebuffer (dev, &init_iscp, ISCP_ADDR, ISCP_SIZE); | |
462 | ether1_writebuffer (dev, &init_scb, SCB_ADDR, SCB_SIZE); | |
463 | ether1_writebuffer (dev, &init_cfg, CFG_ADDR, CFG_SIZE); | |
464 | ether1_writebuffer (dev, &init_sa, SA_ADDR, SA_SIZE); | |
465 | ether1_writebuffer (dev, &init_mc, MC_ADDR, MC_SIZE); | |
466 | ether1_writebuffer (dev, &init_tdr, TDR_ADDR, TDR_SIZE); | |
467 | ether1_writebuffer (dev, &init_nop, NOP_ADDR, NOP_SIZE); | |
468 | ||
469 | if (ether1_readw(dev, CFG_ADDR, cfg_t, cfg_command, NORMALIRQS) != CMD_CONFIG) { | |
470 | printk (KERN_ERR "%s: detected either RAM fault or compiler bug\n", | |
471 | dev->name); | |
472 | return 1; | |
473 | } | |
474 | ||
475 | /* | |
476 | * setup circularly linked list of { rfd, rbd, buffer }, with | |
477 | * all rfds circularly linked, rbds circularly linked. | |
478 | * First rfd is linked to scp, first rbd is linked to first | |
479 | * rfd. Last rbd has a suspend command. | |
480 | */ | |
481 | addr = RX_AREA_START; | |
482 | do { | |
483 | next = addr + RFD_SIZE + RBD_SIZE + ETH_FRAME_LEN + 10; | |
484 | next2 = next + RFD_SIZE + RBD_SIZE + ETH_FRAME_LEN + 10; | |
485 | ||
486 | if (next2 >= RX_AREA_END) { | |
487 | next = RX_AREA_START; | |
488 | init_rfd.rfd_command = RFD_CMDEL | RFD_CMDSUSPEND; | |
489 | priv(dev)->rx_tail = addr; | |
490 | } else | |
491 | init_rfd.rfd_command = 0; | |
492 | if (addr == RX_AREA_START) | |
493 | init_rfd.rfd_rbdoffset = addr + RFD_SIZE; | |
494 | else | |
495 | init_rfd.rfd_rbdoffset = 0; | |
496 | init_rfd.rfd_link = next; | |
497 | init_rbd.rbd_link = next + RFD_SIZE; | |
498 | init_rbd.rbd_bufl = addr + RFD_SIZE + RBD_SIZE; | |
499 | ||
500 | ether1_writebuffer (dev, &init_rfd, addr, RFD_SIZE); | |
501 | ether1_writebuffer (dev, &init_rbd, addr + RFD_SIZE, RBD_SIZE); | |
502 | addr = next; | |
503 | } while (next2 < RX_AREA_END); | |
504 | ||
505 | priv(dev)->tx_link = NOP_ADDR; | |
506 | priv(dev)->tx_head = NOP_ADDR + NOP_SIZE; | |
507 | priv(dev)->tx_tail = TDR_ADDR; | |
508 | priv(dev)->rx_head = RX_AREA_START; | |
509 | ||
510 | /* release reset & give 586 a prod */ | |
511 | priv(dev)->resetting = 1; | |
512 | priv(dev)->initialising = 1; | |
513 | writeb(CTRL_RST, REG_CONTROL); | |
514 | writeb(0, REG_CONTROL); | |
515 | writeb(CTRL_CA, REG_CONTROL); | |
516 | ||
517 | /* 586 should now unset iscp.busy */ | |
518 | timeout = jiffies + HZ/2; | |
519 | while (ether1_readw(dev, ISCP_ADDR, iscp_t, iscp_busy, DISABLEIRQS) == 1) { | |
520 | if (time_after(jiffies, timeout)) { | |
521 | printk (KERN_WARNING "%s: can't initialise 82586: iscp is busy\n", dev->name); | |
522 | return 1; | |
523 | } | |
524 | } | |
525 | ||
526 | /* check status of commands that we issued */ | |
527 | timeout += HZ/10; | |
528 | while (((status = ether1_readw(dev, CFG_ADDR, cfg_t, cfg_status, DISABLEIRQS)) | |
529 | & STAT_COMPLETE) == 0) { | |
530 | if (time_after(jiffies, timeout)) | |
531 | break; | |
532 | } | |
533 | ||
534 | if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) { | |
535 | printk (KERN_WARNING "%s: can't initialise 82586: config status %04X\n", dev->name, status); | |
536 | printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name, | |
537 | ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS), | |
538 | ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS), | |
539 | ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS), | |
540 | ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS)); | |
541 | failures += 1; | |
542 | } | |
543 | ||
544 | timeout += HZ/10; | |
545 | while (((status = ether1_readw(dev, SA_ADDR, sa_t, sa_status, DISABLEIRQS)) | |
546 | & STAT_COMPLETE) == 0) { | |
547 | if (time_after(jiffies, timeout)) | |
548 | break; | |
549 | } | |
550 | ||
551 | if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) { | |
552 | printk (KERN_WARNING "%s: can't initialise 82586: set address status %04X\n", dev->name, status); | |
553 | printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name, | |
554 | ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS), | |
555 | ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS), | |
556 | ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS), | |
557 | ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS)); | |
558 | failures += 1; | |
559 | } | |
560 | ||
561 | timeout += HZ/10; | |
562 | while (((status = ether1_readw(dev, MC_ADDR, mc_t, mc_status, DISABLEIRQS)) | |
563 | & STAT_COMPLETE) == 0) { | |
564 | if (time_after(jiffies, timeout)) | |
565 | break; | |
566 | } | |
567 | ||
568 | if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) { | |
569 | printk (KERN_WARNING "%s: can't initialise 82586: set multicast status %04X\n", dev->name, status); | |
570 | printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name, | |
571 | ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS), | |
572 | ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS), | |
573 | ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS), | |
574 | ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS)); | |
575 | failures += 1; | |
576 | } | |
577 | ||
578 | timeout += HZ; | |
579 | while (((status = ether1_readw(dev, TDR_ADDR, tdr_t, tdr_status, DISABLEIRQS)) | |
580 | & STAT_COMPLETE) == 0) { | |
581 | if (time_after(jiffies, timeout)) | |
582 | break; | |
583 | } | |
584 | ||
585 | if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) { | |
586 | printk (KERN_WARNING "%s: can't tdr (ignored)\n", dev->name); | |
587 | printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name, | |
588 | ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS), | |
589 | ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS), | |
590 | ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS), | |
591 | ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS)); | |
592 | } else { | |
593 | status = ether1_readw(dev, TDR_ADDR, tdr_t, tdr_result, DISABLEIRQS); | |
594 | if (status & TDR_XCVRPROB) | |
595 | printk (KERN_WARNING "%s: i/f failed tdr: transceiver problem\n", dev->name); | |
596 | else if ((status & (TDR_SHORT|TDR_OPEN)) && (status & TDR_TIME)) { | |
597 | #ifdef FANCY | |
598 | printk (KERN_WARNING "%s: i/f failed tdr: cable %s %d.%d us away\n", dev->name, | |
599 | status & TDR_SHORT ? "short" : "open", (status & TDR_TIME) / 10, | |
600 | (status & TDR_TIME) % 10); | |
601 | #else | |
602 | printk (KERN_WARNING "%s: i/f failed tdr: cable %s %d clks away\n", dev->name, | |
603 | status & TDR_SHORT ? "short" : "open", (status & TDR_TIME)); | |
604 | #endif | |
605 | } | |
606 | } | |
607 | ||
608 | if (failures) | |
609 | ether1_reset (dev); | |
610 | return failures ? 1 : 0; | |
611 | } | |
612 | ||
613 | /* ------------------------------------------------------------------------- */ | |
614 | ||
615 | static int | |
616 | ether1_txalloc (struct net_device *dev, int size) | |
617 | { | |
618 | int start, tail; | |
619 | ||
620 | size = (size + 1) & ~1; | |
621 | tail = priv(dev)->tx_tail; | |
622 | ||
623 | if (priv(dev)->tx_head + size > TX_AREA_END) { | |
624 | if (tail > priv(dev)->tx_head) | |
625 | return -1; | |
626 | start = TX_AREA_START; | |
627 | if (start + size > tail) | |
628 | return -1; | |
629 | priv(dev)->tx_head = start + size; | |
630 | } else { | |
631 | if (priv(dev)->tx_head < tail && (priv(dev)->tx_head + size) > tail) | |
632 | return -1; | |
633 | start = priv(dev)->tx_head; | |
634 | priv(dev)->tx_head += size; | |
635 | } | |
636 | ||
637 | return start; | |
638 | } | |
639 | ||
640 | static int | |
641 | ether1_open (struct net_device *dev) | |
642 | { | |
643 | if (!is_valid_ether_addr(dev->dev_addr)) { | |
644 | printk(KERN_WARNING "%s: invalid ethernet MAC address\n", | |
645 | dev->name); | |
646 | return -EINVAL; | |
647 | } | |
648 | ||
649 | if (request_irq(dev->irq, ether1_interrupt, 0, "ether1", dev)) | |
650 | return -EAGAIN; | |
651 | ||
652 | memset (&priv(dev)->stats, 0, sizeof (struct net_device_stats)); | |
653 | ||
654 | if (ether1_init_for_open (dev)) { | |
655 | free_irq (dev->irq, dev); | |
656 | return -EAGAIN; | |
657 | } | |
658 | ||
659 | netif_start_queue(dev); | |
660 | ||
661 | return 0; | |
662 | } | |
663 | ||
664 | static void | |
665 | ether1_timeout(struct net_device *dev) | |
666 | { | |
667 | printk(KERN_WARNING "%s: transmit timeout, network cable problem?\n", | |
668 | dev->name); | |
669 | printk(KERN_WARNING "%s: resetting device\n", dev->name); | |
670 | ||
671 | ether1_reset (dev); | |
672 | ||
673 | if (ether1_init_for_open (dev)) | |
674 | printk (KERN_ERR "%s: unable to restart interface\n", dev->name); | |
675 | ||
676 | priv(dev)->stats.tx_errors++; | |
677 | netif_wake_queue(dev); | |
678 | } | |
679 | ||
680 | static int | |
681 | ether1_sendpacket (struct sk_buff *skb, struct net_device *dev) | |
682 | { | |
683 | int tmp, tst, nopaddr, txaddr, tbdaddr, dataddr; | |
684 | unsigned long flags; | |
685 | tx_t tx; | |
686 | tbd_t tbd; | |
687 | nop_t nop; | |
688 | ||
689 | if (priv(dev)->restart) { | |
690 | printk(KERN_WARNING "%s: resetting device\n", dev->name); | |
691 | ||
692 | ether1_reset(dev); | |
693 | ||
694 | if (ether1_init_for_open(dev)) | |
695 | printk(KERN_ERR "%s: unable to restart interface\n", dev->name); | |
696 | else | |
697 | priv(dev)->restart = 0; | |
698 | } | |
699 | ||
700 | if (skb->len < ETH_ZLEN) { | |
5b057c6b | 701 | if (skb_padto(skb, ETH_ZLEN)) |
1da177e4 LT |
702 | goto out; |
703 | } | |
704 | ||
705 | /* | |
706 | * insert packet followed by a nop | |
707 | */ | |
708 | txaddr = ether1_txalloc (dev, TX_SIZE); | |
709 | tbdaddr = ether1_txalloc (dev, TBD_SIZE); | |
710 | dataddr = ether1_txalloc (dev, skb->len); | |
711 | nopaddr = ether1_txalloc (dev, NOP_SIZE); | |
712 | ||
713 | tx.tx_status = 0; | |
714 | tx.tx_command = CMD_TX | CMD_INTR; | |
715 | tx.tx_link = nopaddr; | |
716 | tx.tx_tbdoffset = tbdaddr; | |
717 | tbd.tbd_opts = TBD_EOL | skb->len; | |
718 | tbd.tbd_link = I82586_NULL; | |
719 | tbd.tbd_bufl = dataddr; | |
720 | tbd.tbd_bufh = 0; | |
721 | nop.nop_status = 0; | |
722 | nop.nop_command = CMD_NOP; | |
723 | nop.nop_link = nopaddr; | |
724 | ||
725 | local_irq_save(flags); | |
726 | ether1_writebuffer (dev, &tx, txaddr, TX_SIZE); | |
727 | ether1_writebuffer (dev, &tbd, tbdaddr, TBD_SIZE); | |
728 | ether1_writebuffer (dev, skb->data, dataddr, skb->len); | |
729 | ether1_writebuffer (dev, &nop, nopaddr, NOP_SIZE); | |
730 | tmp = priv(dev)->tx_link; | |
731 | priv(dev)->tx_link = nopaddr; | |
732 | ||
733 | /* now reset the previous nop pointer */ | |
734 | ether1_writew(dev, txaddr, tmp, nop_t, nop_link, NORMALIRQS); | |
735 | ||
736 | local_irq_restore(flags); | |
737 | ||
738 | /* handle transmit */ | |
739 | dev->trans_start = jiffies; | |
740 | ||
741 | /* check to see if we have room for a full sized ether frame */ | |
742 | tmp = priv(dev)->tx_head; | |
743 | tst = ether1_txalloc (dev, TX_SIZE + TBD_SIZE + NOP_SIZE + ETH_FRAME_LEN); | |
744 | priv(dev)->tx_head = tmp; | |
745 | dev_kfree_skb (skb); | |
746 | ||
747 | if (tst == -1) | |
748 | netif_stop_queue(dev); | |
749 | ||
750 | out: | |
6ed10654 | 751 | return NETDEV_TX_OK; |
1da177e4 LT |
752 | } |
753 | ||
754 | static void | |
755 | ether1_xmit_done (struct net_device *dev) | |
756 | { | |
757 | nop_t nop; | |
758 | int caddr, tst; | |
759 | ||
760 | caddr = priv(dev)->tx_tail; | |
761 | ||
762 | again: | |
763 | ether1_readbuffer (dev, &nop, caddr, NOP_SIZE); | |
764 | ||
765 | switch (nop.nop_command & CMD_MASK) { | |
766 | case CMD_TDR: | |
767 | /* special case */ | |
768 | if (ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS) | |
769 | != (unsigned short)I82586_NULL) { | |
770 | ether1_writew(dev, SCB_CMDCUCSTART | SCB_CMDRXSTART, SCB_ADDR, scb_t, | |
771 | scb_command, NORMALIRQS); | |
772 | writeb(CTRL_CA, REG_CONTROL); | |
773 | } | |
774 | priv(dev)->tx_tail = NOP_ADDR; | |
775 | return; | |
776 | ||
777 | case CMD_NOP: | |
778 | if (nop.nop_link == caddr) { | |
779 | if (priv(dev)->initialising == 0) | |
780 | printk (KERN_WARNING "%s: strange command complete with no tx command!\n", dev->name); | |
781 | else | |
782 | priv(dev)->initialising = 0; | |
783 | return; | |
784 | } | |
785 | if (caddr == nop.nop_link) | |
786 | return; | |
787 | caddr = nop.nop_link; | |
788 | goto again; | |
789 | ||
790 | case CMD_TX: | |
791 | if (nop.nop_status & STAT_COMPLETE) | |
792 | break; | |
793 | printk (KERN_ERR "%s: strange command complete without completed command\n", dev->name); | |
794 | priv(dev)->restart = 1; | |
795 | return; | |
796 | ||
797 | default: | |
798 | printk (KERN_WARNING "%s: strange command %d complete! (offset %04X)", dev->name, | |
799 | nop.nop_command & CMD_MASK, caddr); | |
800 | priv(dev)->restart = 1; | |
801 | return; | |
802 | } | |
803 | ||
804 | while (nop.nop_status & STAT_COMPLETE) { | |
805 | if (nop.nop_status & STAT_OK) { | |
806 | priv(dev)->stats.tx_packets ++; | |
807 | priv(dev)->stats.collisions += (nop.nop_status & STAT_COLLISIONS); | |
808 | } else { | |
809 | priv(dev)->stats.tx_errors ++; | |
810 | ||
811 | if (nop.nop_status & STAT_COLLAFTERTX) | |
812 | priv(dev)->stats.collisions ++; | |
813 | if (nop.nop_status & STAT_NOCARRIER) | |
814 | priv(dev)->stats.tx_carrier_errors ++; | |
815 | if (nop.nop_status & STAT_TXLOSTCTS) | |
816 | printk (KERN_WARNING "%s: cts lost\n", dev->name); | |
817 | if (nop.nop_status & STAT_TXSLOWDMA) | |
818 | priv(dev)->stats.tx_fifo_errors ++; | |
819 | if (nop.nop_status & STAT_COLLEXCESSIVE) | |
820 | priv(dev)->stats.collisions += 16; | |
821 | } | |
822 | ||
823 | if (nop.nop_link == caddr) { | |
824 | printk (KERN_ERR "%s: tx buffer chaining error: tx command points to itself\n", dev->name); | |
825 | break; | |
826 | } | |
827 | ||
828 | caddr = nop.nop_link; | |
829 | ether1_readbuffer (dev, &nop, caddr, NOP_SIZE); | |
830 | if ((nop.nop_command & CMD_MASK) != CMD_NOP) { | |
831 | printk (KERN_ERR "%s: tx buffer chaining error: no nop after tx command\n", dev->name); | |
832 | break; | |
833 | } | |
834 | ||
835 | if (caddr == nop.nop_link) | |
836 | break; | |
837 | ||
838 | caddr = nop.nop_link; | |
839 | ether1_readbuffer (dev, &nop, caddr, NOP_SIZE); | |
840 | if ((nop.nop_command & CMD_MASK) != CMD_TX) { | |
841 | printk (KERN_ERR "%s: tx buffer chaining error: no tx command after nop\n", dev->name); | |
842 | break; | |
843 | } | |
844 | } | |
845 | priv(dev)->tx_tail = caddr; | |
846 | ||
847 | caddr = priv(dev)->tx_head; | |
848 | tst = ether1_txalloc (dev, TX_SIZE + TBD_SIZE + NOP_SIZE + ETH_FRAME_LEN); | |
849 | priv(dev)->tx_head = caddr; | |
850 | if (tst != -1) | |
851 | netif_wake_queue(dev); | |
852 | } | |
853 | ||
854 | static void | |
855 | ether1_recv_done (struct net_device *dev) | |
856 | { | |
857 | int status; | |
858 | int nexttail, rbdaddr; | |
859 | rbd_t rbd; | |
860 | ||
861 | do { | |
862 | status = ether1_readw(dev, priv(dev)->rx_head, rfd_t, rfd_status, NORMALIRQS); | |
863 | if ((status & RFD_COMPLETE) == 0) | |
864 | break; | |
865 | ||
866 | rbdaddr = ether1_readw(dev, priv(dev)->rx_head, rfd_t, rfd_rbdoffset, NORMALIRQS); | |
867 | ether1_readbuffer (dev, &rbd, rbdaddr, RBD_SIZE); | |
868 | ||
869 | if ((rbd.rbd_status & (RBD_EOF | RBD_ACNTVALID)) == (RBD_EOF | RBD_ACNTVALID)) { | |
870 | int length = rbd.rbd_status & RBD_ACNT; | |
871 | struct sk_buff *skb; | |
872 | ||
873 | length = (length + 1) & ~1; | |
874 | skb = dev_alloc_skb (length + 2); | |
875 | ||
876 | if (skb) { | |
1da177e4 LT |
877 | skb_reserve (skb, 2); |
878 | ||
879 | ether1_readbuffer (dev, skb_put (skb, length), rbd.rbd_bufl, length); | |
880 | ||
881 | skb->protocol = eth_type_trans (skb, dev); | |
882 | netif_rx (skb); | |
883 | priv(dev)->stats.rx_packets ++; | |
884 | } else | |
885 | priv(dev)->stats.rx_dropped ++; | |
886 | } else { | |
887 | printk(KERN_WARNING "%s: %s\n", dev->name, | |
888 | (rbd.rbd_status & RBD_EOF) ? "oversized packet" : "acnt not valid"); | |
889 | priv(dev)->stats.rx_dropped ++; | |
890 | } | |
891 | ||
892 | nexttail = ether1_readw(dev, priv(dev)->rx_tail, rfd_t, rfd_link, NORMALIRQS); | |
893 | /* nexttail should be rx_head */ | |
894 | if (nexttail != priv(dev)->rx_head) | |
895 | printk(KERN_ERR "%s: receiver buffer chaining error (%04X != %04X)\n", | |
896 | dev->name, nexttail, priv(dev)->rx_head); | |
897 | ether1_writew(dev, RFD_CMDEL | RFD_CMDSUSPEND, nexttail, rfd_t, rfd_command, NORMALIRQS); | |
898 | ether1_writew(dev, 0, priv(dev)->rx_tail, rfd_t, rfd_command, NORMALIRQS); | |
899 | ether1_writew(dev, 0, priv(dev)->rx_tail, rfd_t, rfd_status, NORMALIRQS); | |
900 | ether1_writew(dev, 0, priv(dev)->rx_tail, rfd_t, rfd_rbdoffset, NORMALIRQS); | |
901 | ||
902 | priv(dev)->rx_tail = nexttail; | |
903 | priv(dev)->rx_head = ether1_readw(dev, priv(dev)->rx_head, rfd_t, rfd_link, NORMALIRQS); | |
904 | } while (1); | |
905 | } | |
906 | ||
907 | static irqreturn_t | |
7d12e780 | 908 | ether1_interrupt (int irq, void *dev_id) |
1da177e4 LT |
909 | { |
910 | struct net_device *dev = (struct net_device *)dev_id; | |
911 | int status; | |
912 | ||
913 | status = ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS); | |
914 | ||
915 | if (status) { | |
916 | ether1_writew(dev, status & (SCB_STRNR | SCB_STCNA | SCB_STFR | SCB_STCX), | |
917 | SCB_ADDR, scb_t, scb_command, NORMALIRQS); | |
918 | writeb(CTRL_CA | CTRL_ACK, REG_CONTROL); | |
919 | if (status & SCB_STCX) { | |
920 | ether1_xmit_done (dev); | |
921 | } | |
922 | if (status & SCB_STCNA) { | |
923 | if (priv(dev)->resetting == 0) | |
924 | printk (KERN_WARNING "%s: CU went not ready ???\n", dev->name); | |
925 | else | |
926 | priv(dev)->resetting += 1; | |
927 | if (ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS) | |
928 | != (unsigned short)I82586_NULL) { | |
929 | ether1_writew(dev, SCB_CMDCUCSTART, SCB_ADDR, scb_t, scb_command, NORMALIRQS); | |
930 | writeb(CTRL_CA, REG_CONTROL); | |
931 | } | |
932 | if (priv(dev)->resetting == 2) | |
933 | priv(dev)->resetting = 0; | |
934 | } | |
935 | if (status & SCB_STFR) { | |
936 | ether1_recv_done (dev); | |
937 | } | |
938 | if (status & SCB_STRNR) { | |
939 | if (ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS) & SCB_STRXSUSP) { | |
940 | printk (KERN_WARNING "%s: RU went not ready: RU suspended\n", dev->name); | |
941 | ether1_writew(dev, SCB_CMDRXRESUME, SCB_ADDR, scb_t, scb_command, NORMALIRQS); | |
942 | writeb(CTRL_CA, REG_CONTROL); | |
943 | priv(dev)->stats.rx_dropped ++; /* we suspended due to lack of buffer space */ | |
944 | } else | |
945 | printk(KERN_WARNING "%s: RU went not ready: %04X\n", dev->name, | |
946 | ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS)); | |
947 | printk (KERN_WARNING "RU ptr = %04X\n", ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, | |
948 | NORMALIRQS)); | |
949 | } | |
950 | } else | |
951 | writeb(CTRL_ACK, REG_CONTROL); | |
952 | ||
953 | return IRQ_HANDLED; | |
954 | } | |
955 | ||
956 | static int | |
957 | ether1_close (struct net_device *dev) | |
958 | { | |
959 | ether1_reset (dev); | |
960 | ||
961 | free_irq(dev->irq, dev); | |
962 | ||
963 | return 0; | |
964 | } | |
965 | ||
966 | static struct net_device_stats * | |
967 | ether1_getstats (struct net_device *dev) | |
968 | { | |
969 | return &priv(dev)->stats; | |
970 | } | |
971 | ||
972 | /* | |
973 | * Set or clear the multicast filter for this adaptor. | |
974 | * num_addrs == -1 Promiscuous mode, receive all packets. | |
975 | * num_addrs == 0 Normal mode, clear multicast list. | |
976 | * num_addrs > 0 Multicast mode, receive normal and MC packets, and do | |
977 | * best-effort filtering. | |
978 | */ | |
979 | static void | |
980 | ether1_setmulticastlist (struct net_device *dev) | |
981 | { | |
982 | } | |
983 | ||
984 | /* ------------------------------------------------------------------------- */ | |
985 | ||
bffa2154 | 986 | static void __devinit ether1_banner(void) |
1da177e4 LT |
987 | { |
988 | static unsigned int version_printed = 0; | |
989 | ||
990 | if (net_debug && version_printed++ == 0) | |
991 | printk(KERN_INFO "%s", version); | |
992 | } | |
993 | ||
0b179e31 AB |
994 | static const struct net_device_ops ether1_netdev_ops = { |
995 | .ndo_open = ether1_open, | |
996 | .ndo_stop = ether1_close, | |
997 | .ndo_start_xmit = ether1_sendpacket, | |
998 | .ndo_get_stats = ether1_getstats, | |
999 | .ndo_set_multicast_list = ether1_setmulticastlist, | |
1000 | .ndo_tx_timeout = ether1_timeout, | |
1001 | .ndo_validate_addr = eth_validate_addr, | |
1002 | .ndo_change_mtu = eth_change_mtu, | |
1003 | .ndo_set_mac_address = eth_mac_addr, | |
1004 | }; | |
1005 | ||
1da177e4 LT |
1006 | static int __devinit |
1007 | ether1_probe(struct expansion_card *ec, const struct ecard_id *id) | |
1008 | { | |
1009 | struct net_device *dev; | |
1010 | int i, ret = 0; | |
1011 | ||
1012 | ether1_banner(); | |
1013 | ||
1014 | ret = ecard_request_resources(ec); | |
1015 | if (ret) | |
1016 | goto out; | |
1017 | ||
1018 | dev = alloc_etherdev(sizeof(struct ether1_priv)); | |
1019 | if (!dev) { | |
1020 | ret = -ENOMEM; | |
1021 | goto release; | |
1022 | } | |
1023 | ||
1da177e4 LT |
1024 | SET_NETDEV_DEV(dev, &ec->dev); |
1025 | ||
1026 | dev->irq = ec->irq; | |
10bdaaa0 | 1027 | priv(dev)->base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); |
1da177e4 LT |
1028 | if (!priv(dev)->base) { |
1029 | ret = -ENOMEM; | |
1030 | goto free; | |
1031 | } | |
1032 | ||
1033 | if ((priv(dev)->bus_type = ether1_reset(dev)) == 0) { | |
1034 | ret = -ENODEV; | |
1035 | goto free; | |
1036 | } | |
1037 | ||
1038 | for (i = 0; i < 6; i++) | |
1039 | dev->dev_addr[i] = readb(IDPROM_ADDRESS + (i << 2)); | |
1040 | ||
1041 | if (ether1_init_2(dev)) { | |
1042 | ret = -ENODEV; | |
1043 | goto free; | |
1044 | } | |
1045 | ||
0b179e31 | 1046 | dev->netdev_ops = ðer1_netdev_ops; |
1da177e4 LT |
1047 | dev->watchdog_timeo = 5 * HZ / 100; |
1048 | ||
1049 | ret = register_netdev(dev); | |
1050 | if (ret) | |
1051 | goto free; | |
1052 | ||
e174961c JB |
1053 | printk(KERN_INFO "%s: ether1 in slot %d, %pM\n", |
1054 | dev->name, ec->slot_no, dev->dev_addr); | |
1da177e4 | 1055 | |
1da177e4 LT |
1056 | ecard_set_drvdata(ec, dev); |
1057 | return 0; | |
1058 | ||
1059 | free: | |
1da177e4 LT |
1060 | free_netdev(dev); |
1061 | release: | |
1062 | ecard_release_resources(ec); | |
1063 | out: | |
1064 | return ret; | |
1065 | } | |
1066 | ||
1067 | static void __devexit ether1_remove(struct expansion_card *ec) | |
1068 | { | |
1069 | struct net_device *dev = ecard_get_drvdata(ec); | |
1070 | ||
1071 | ecard_set_drvdata(ec, NULL); | |
1072 | ||
1073 | unregister_netdev(dev); | |
1da177e4 LT |
1074 | free_netdev(dev); |
1075 | ecard_release_resources(ec); | |
1076 | } | |
1077 | ||
1078 | static const struct ecard_id ether1_ids[] = { | |
1079 | { MANU_ACORN, PROD_ACORN_ETHER1 }, | |
1080 | { 0xffff, 0xffff } | |
1081 | }; | |
1082 | ||
1083 | static struct ecard_driver ether1_driver = { | |
1084 | .probe = ether1_probe, | |
1085 | .remove = __devexit_p(ether1_remove), | |
1086 | .id_table = ether1_ids, | |
1087 | .drv = { | |
1088 | .name = "ether1", | |
1089 | }, | |
1090 | }; | |
1091 | ||
1092 | static int __init ether1_init(void) | |
1093 | { | |
1094 | return ecard_register_driver(ðer1_driver); | |
1095 | } | |
1096 | ||
1097 | static void __exit ether1_exit(void) | |
1098 | { | |
1099 | ecard_remove_driver(ðer1_driver); | |
1100 | } | |
1101 | ||
1102 | module_init(ether1_init); | |
1103 | module_exit(ether1_exit); | |
1104 | ||
1105 | MODULE_LICENSE("GPL"); |