]>
Commit | Line | Data |
---|---|---|
500fe141 SO |
1 | /* |
2 | * LP5521 LED chip driver. | |
3 | * | |
4 | * Copyright (C) 2010 Nokia Corporation | |
5 | * | |
6 | * Contact: Samu Onkalo <[email protected]> | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or | |
9 | * modify it under the terms of the GNU General Public License | |
10 | * version 2 as published by the Free Software Foundation. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, but | |
13 | * WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
15 | * General Public License for more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License | |
18 | * along with this program; if not, write to the Free Software | |
19 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | |
20 | * 02110-1301 USA | |
21 | */ | |
22 | ||
23 | #include <linux/module.h> | |
24 | #include <linux/init.h> | |
25 | #include <linux/i2c.h> | |
26 | #include <linux/mutex.h> | |
27 | #include <linux/gpio.h> | |
28 | #include <linux/interrupt.h> | |
29 | #include <linux/delay.h> | |
30 | #include <linux/ctype.h> | |
31 | #include <linux/spinlock.h> | |
32 | #include <linux/wait.h> | |
33 | #include <linux/leds.h> | |
34 | #include <linux/leds-lp5521.h> | |
35 | #include <linux/workqueue.h> | |
36 | #include <linux/slab.h> | |
37 | ||
38 | #define LP5521_PROGRAM_LENGTH 32 /* in bytes */ | |
39 | ||
40 | #define LP5521_MAX_LEDS 3 /* Maximum number of LEDs */ | |
41 | #define LP5521_MAX_ENGINES 3 /* Maximum number of engines */ | |
42 | ||
43 | #define LP5521_ENG_MASK_BASE 0x30 /* 00110000 */ | |
44 | #define LP5521_ENG_STATUS_MASK 0x07 /* 00000111 */ | |
45 | ||
46 | #define LP5521_CMD_LOAD 0x15 /* 00010101 */ | |
47 | #define LP5521_CMD_RUN 0x2a /* 00101010 */ | |
48 | #define LP5521_CMD_DIRECT 0x3f /* 00111111 */ | |
49 | #define LP5521_CMD_DISABLED 0x00 /* 00000000 */ | |
50 | ||
51 | /* Registers */ | |
52 | #define LP5521_REG_ENABLE 0x00 | |
53 | #define LP5521_REG_OP_MODE 0x01 | |
54 | #define LP5521_REG_R_PWM 0x02 | |
55 | #define LP5521_REG_G_PWM 0x03 | |
56 | #define LP5521_REG_B_PWM 0x04 | |
57 | #define LP5521_REG_R_CURRENT 0x05 | |
58 | #define LP5521_REG_G_CURRENT 0x06 | |
59 | #define LP5521_REG_B_CURRENT 0x07 | |
60 | #define LP5521_REG_CONFIG 0x08 | |
61 | #define LP5521_REG_R_CHANNEL_PC 0x09 | |
62 | #define LP5521_REG_G_CHANNEL_PC 0x0A | |
63 | #define LP5521_REG_B_CHANNEL_PC 0x0B | |
64 | #define LP5521_REG_STATUS 0x0C | |
65 | #define LP5521_REG_RESET 0x0D | |
66 | #define LP5521_REG_GPO 0x0E | |
67 | #define LP5521_REG_R_PROG_MEM 0x10 | |
68 | #define LP5521_REG_G_PROG_MEM 0x30 | |
69 | #define LP5521_REG_B_PROG_MEM 0x50 | |
70 | ||
71 | #define LP5521_PROG_MEM_BASE LP5521_REG_R_PROG_MEM | |
72 | #define LP5521_PROG_MEM_SIZE 0x20 | |
73 | ||
74 | /* Base register to set LED current */ | |
75 | #define LP5521_REG_LED_CURRENT_BASE LP5521_REG_R_CURRENT | |
76 | ||
77 | /* Base register to set the brightness */ | |
78 | #define LP5521_REG_LED_PWM_BASE LP5521_REG_R_PWM | |
79 | ||
80 | /* Bits in ENABLE register */ | |
81 | #define LP5521_MASTER_ENABLE 0x40 /* Chip master enable */ | |
82 | #define LP5521_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */ | |
83 | #define LP5521_EXEC_RUN 0x2A | |
32a2f747 KM |
84 | #define LP5521_ENABLE_DEFAULT \ |
85 | (LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM) | |
86 | #define LP5521_ENABLE_RUN_PROGRAM \ | |
87 | (LP5521_ENABLE_DEFAULT | LP5521_EXEC_RUN) | |
500fe141 | 88 | |
500fe141 SO |
89 | /* Status */ |
90 | #define LP5521_EXT_CLK_USED 0x08 | |
91 | ||
b3c49c05 SK |
92 | /* default R channel current register value */ |
93 | #define LP5521_REG_R_CURR_DEFAULT 0xAF | |
94 | ||
011af7bc KM |
95 | /* Pattern Mode */ |
96 | #define PATTERN_OFF 0 | |
97 | ||
500fe141 | 98 | struct lp5521_engine { |
500fe141 SO |
99 | int id; |
100 | u8 mode; | |
101 | u8 prog_page; | |
102 | u8 engine_mask; | |
103 | }; | |
104 | ||
105 | struct lp5521_led { | |
106 | int id; | |
107 | u8 chan_nr; | |
108 | u8 led_current; | |
109 | u8 max_current; | |
110 | struct led_classdev cdev; | |
111 | struct work_struct brightness_work; | |
112 | u8 brightness; | |
113 | }; | |
114 | ||
115 | struct lp5521_chip { | |
116 | struct lp5521_platform_data *pdata; | |
117 | struct mutex lock; /* Serialize control */ | |
118 | struct i2c_client *client; | |
119 | struct lp5521_engine engines[LP5521_MAX_ENGINES]; | |
120 | struct lp5521_led leds[LP5521_MAX_LEDS]; | |
121 | u8 num_channels; | |
122 | u8 num_leds; | |
123 | }; | |
124 | ||
9fdb18b6 SO |
125 | static inline struct lp5521_led *cdev_to_led(struct led_classdev *cdev) |
126 | { | |
127 | return container_of(cdev, struct lp5521_led, cdev); | |
128 | } | |
129 | ||
130 | static inline struct lp5521_chip *engine_to_lp5521(struct lp5521_engine *engine) | |
131 | { | |
132 | return container_of(engine, struct lp5521_chip, | |
133 | engines[engine->id - 1]); | |
134 | } | |
135 | ||
136 | static inline struct lp5521_chip *led_to_lp5521(struct lp5521_led *led) | |
137 | { | |
138 | return container_of(led, struct lp5521_chip, | |
139 | leds[led->id]); | |
140 | } | |
500fe141 SO |
141 | |
142 | static void lp5521_led_brightness_work(struct work_struct *work); | |
143 | ||
144 | static inline int lp5521_write(struct i2c_client *client, u8 reg, u8 value) | |
145 | { | |
146 | return i2c_smbus_write_byte_data(client, reg, value); | |
147 | } | |
148 | ||
149 | static int lp5521_read(struct i2c_client *client, u8 reg, u8 *buf) | |
150 | { | |
151 | s32 ret; | |
152 | ||
153 | ret = i2c_smbus_read_byte_data(client, reg); | |
154 | if (ret < 0) | |
155 | return -EIO; | |
156 | ||
157 | *buf = ret; | |
158 | return 0; | |
159 | } | |
160 | ||
161 | static int lp5521_set_engine_mode(struct lp5521_engine *engine, u8 mode) | |
162 | { | |
163 | struct lp5521_chip *chip = engine_to_lp5521(engine); | |
164 | struct i2c_client *client = chip->client; | |
165 | int ret; | |
166 | u8 engine_state; | |
167 | ||
168 | /* Only transition between RUN and DIRECT mode are handled here */ | |
169 | if (mode == LP5521_CMD_LOAD) | |
170 | return 0; | |
171 | ||
172 | if (mode == LP5521_CMD_DISABLED) | |
173 | mode = LP5521_CMD_DIRECT; | |
174 | ||
175 | ret = lp5521_read(client, LP5521_REG_OP_MODE, &engine_state); | |
fa0ea0e1 AL |
176 | if (ret < 0) |
177 | return ret; | |
500fe141 SO |
178 | |
179 | /* set mode only for this engine */ | |
180 | engine_state &= ~(engine->engine_mask); | |
181 | mode &= engine->engine_mask; | |
182 | engine_state |= mode; | |
fa0ea0e1 | 183 | return lp5521_write(client, LP5521_REG_OP_MODE, engine_state); |
500fe141 SO |
184 | } |
185 | ||
186 | static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern) | |
187 | { | |
188 | struct lp5521_chip *chip = engine_to_lp5521(eng); | |
189 | struct i2c_client *client = chip->client; | |
190 | int ret; | |
191 | int addr; | |
192 | u8 mode; | |
193 | ||
194 | /* move current engine to direct mode and remember the state */ | |
195 | ret = lp5521_set_engine_mode(eng, LP5521_CMD_DIRECT); | |
5bc9ad77 DC |
196 | if (ret) |
197 | return ret; | |
198 | ||
09c76b0f SO |
199 | /* Mode change requires min 500 us delay. 1 - 2 ms with margin */ |
200 | usleep_range(1000, 2000); | |
5bc9ad77 DC |
201 | ret = lp5521_read(client, LP5521_REG_OP_MODE, &mode); |
202 | if (ret) | |
203 | return ret; | |
500fe141 SO |
204 | |
205 | /* For loading, all the engines to load mode */ | |
206 | lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); | |
09c76b0f SO |
207 | /* Mode change requires min 500 us delay. 1 - 2 ms with margin */ |
208 | usleep_range(1000, 2000); | |
500fe141 | 209 | lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_LOAD); |
09c76b0f SO |
210 | /* Mode change requires min 500 us delay. 1 - 2 ms with margin */ |
211 | usleep_range(1000, 2000); | |
500fe141 SO |
212 | |
213 | addr = LP5521_PROG_MEM_BASE + eng->prog_page * LP5521_PROG_MEM_SIZE; | |
214 | i2c_smbus_write_i2c_block_data(client, | |
215 | addr, | |
216 | LP5521_PROG_MEM_SIZE, | |
217 | pattern); | |
218 | ||
5bc9ad77 | 219 | return lp5521_write(client, LP5521_REG_OP_MODE, mode); |
500fe141 SO |
220 | } |
221 | ||
222 | static int lp5521_set_led_current(struct lp5521_chip *chip, int led, u8 curr) | |
223 | { | |
224 | return lp5521_write(chip->client, | |
225 | LP5521_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr, | |
226 | curr); | |
227 | } | |
228 | ||
d4e7ad03 | 229 | static void lp5521_init_engine(struct lp5521_chip *chip) |
500fe141 SO |
230 | { |
231 | int i; | |
232 | for (i = 0; i < ARRAY_SIZE(chip->engines); i++) { | |
233 | chip->engines[i].id = i + 1; | |
234 | chip->engines[i].engine_mask = LP5521_ENG_MASK_BASE >> (i * 2); | |
235 | chip->engines[i].prog_page = i; | |
500fe141 SO |
236 | } |
237 | } | |
238 | ||
d4e7ad03 | 239 | static int lp5521_configure(struct i2c_client *client) |
500fe141 SO |
240 | { |
241 | struct lp5521_chip *chip = i2c_get_clientdata(client); | |
242 | int ret; | |
3b49aacd | 243 | u8 cfg; |
500fe141 | 244 | |
d4e7ad03 | 245 | lp5521_init_engine(chip); |
500fe141 | 246 | |
500fe141 | 247 | /* Set all PWMs to direct control mode */ |
32a2f747 | 248 | ret = lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); |
500fe141 | 249 | |
3b49aacd KM |
250 | cfg = chip->pdata->update_config ? |
251 | : (LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT); | |
252 | ret |= lp5521_write(client, LP5521_REG_CONFIG, cfg); | |
500fe141 SO |
253 | |
254 | /* Initialize all channels PWM to zero -> leds off */ | |
255 | ret |= lp5521_write(client, LP5521_REG_R_PWM, 0); | |
256 | ret |= lp5521_write(client, LP5521_REG_G_PWM, 0); | |
257 | ret |= lp5521_write(client, LP5521_REG_B_PWM, 0); | |
258 | ||
259 | /* Set engines are set to run state when OP_MODE enables engines */ | |
260 | ret |= lp5521_write(client, LP5521_REG_ENABLE, | |
32a2f747 | 261 | LP5521_ENABLE_RUN_PROGRAM); |
09c76b0f SO |
262 | /* enable takes 500us. 1 - 2 ms leaves some margin */ |
263 | usleep_range(1000, 2000); | |
500fe141 SO |
264 | |
265 | return ret; | |
266 | } | |
267 | ||
268 | static int lp5521_run_selftest(struct lp5521_chip *chip, char *buf) | |
269 | { | |
270 | int ret; | |
271 | u8 status; | |
272 | ||
273 | ret = lp5521_read(chip->client, LP5521_REG_STATUS, &status); | |
274 | if (ret < 0) | |
275 | return ret; | |
276 | ||
277 | /* Check that ext clock is really in use if requested */ | |
278 | if (chip->pdata && chip->pdata->clock_mode == LP5521_CLOCK_EXT) | |
279 | if ((status & LP5521_EXT_CLK_USED) == 0) | |
280 | return -EIO; | |
281 | return 0; | |
282 | } | |
283 | ||
284 | static void lp5521_set_brightness(struct led_classdev *cdev, | |
285 | enum led_brightness brightness) | |
286 | { | |
287 | struct lp5521_led *led = cdev_to_led(cdev); | |
288 | led->brightness = (u8)brightness; | |
289 | schedule_work(&led->brightness_work); | |
290 | } | |
291 | ||
292 | static void lp5521_led_brightness_work(struct work_struct *work) | |
293 | { | |
294 | struct lp5521_led *led = container_of(work, | |
295 | struct lp5521_led, | |
296 | brightness_work); | |
297 | struct lp5521_chip *chip = led_to_lp5521(led); | |
298 | struct i2c_client *client = chip->client; | |
299 | ||
300 | mutex_lock(&chip->lock); | |
301 | lp5521_write(client, LP5521_REG_LED_PWM_BASE + led->chan_nr, | |
302 | led->brightness); | |
303 | mutex_unlock(&chip->lock); | |
304 | } | |
305 | ||
306 | /* Detect the chip by setting its ENABLE register and reading it back. */ | |
307 | static int lp5521_detect(struct i2c_client *client) | |
308 | { | |
309 | int ret; | |
310 | u8 buf; | |
311 | ||
32a2f747 | 312 | ret = lp5521_write(client, LP5521_REG_ENABLE, LP5521_ENABLE_DEFAULT); |
500fe141 SO |
313 | if (ret) |
314 | return ret; | |
09c76b0f SO |
315 | /* enable takes 500us. 1 - 2 ms leaves some margin */ |
316 | usleep_range(1000, 2000); | |
500fe141 SO |
317 | ret = lp5521_read(client, LP5521_REG_ENABLE, &buf); |
318 | if (ret) | |
319 | return ret; | |
32a2f747 | 320 | if (buf != LP5521_ENABLE_DEFAULT) |
500fe141 SO |
321 | return -ENODEV; |
322 | ||
323 | return 0; | |
324 | } | |
325 | ||
326 | /* Set engine mode and create appropriate sysfs attributes, if required. */ | |
327 | static int lp5521_set_mode(struct lp5521_engine *engine, u8 mode) | |
328 | { | |
500fe141 SO |
329 | int ret = 0; |
330 | ||
331 | /* if in that mode already do nothing, except for run */ | |
332 | if (mode == engine->mode && mode != LP5521_CMD_RUN) | |
333 | return 0; | |
334 | ||
335 | if (mode == LP5521_CMD_RUN) { | |
336 | ret = lp5521_set_engine_mode(engine, LP5521_CMD_RUN); | |
337 | } else if (mode == LP5521_CMD_LOAD) { | |
338 | lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED); | |
339 | lp5521_set_engine_mode(engine, LP5521_CMD_LOAD); | |
500fe141 SO |
340 | } else if (mode == LP5521_CMD_DISABLED) { |
341 | lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED); | |
342 | } | |
343 | ||
500fe141 SO |
344 | engine->mode = mode; |
345 | ||
346 | return ret; | |
347 | } | |
348 | ||
349 | static int lp5521_do_store_load(struct lp5521_engine *engine, | |
350 | const char *buf, size_t len) | |
351 | { | |
352 | struct lp5521_chip *chip = engine_to_lp5521(engine); | |
353 | struct i2c_client *client = chip->client; | |
354 | int ret, nrchars, offset = 0, i = 0; | |
355 | char c[3]; | |
356 | unsigned cmd; | |
357 | u8 pattern[LP5521_PROGRAM_LENGTH] = {0}; | |
358 | ||
359 | while ((offset < len - 1) && (i < LP5521_PROGRAM_LENGTH)) { | |
360 | /* separate sscanfs because length is working only for %s */ | |
361 | ret = sscanf(buf + offset, "%2s%n ", c, &nrchars); | |
2260209c VK |
362 | if (ret != 2) |
363 | goto fail; | |
500fe141 SO |
364 | ret = sscanf(c, "%2x", &cmd); |
365 | if (ret != 1) | |
366 | goto fail; | |
367 | pattern[i] = (u8)cmd; | |
368 | ||
369 | offset += nrchars; | |
370 | i++; | |
371 | } | |
372 | ||
373 | /* Each instruction is 16bit long. Check that length is even */ | |
374 | if (i % 2) | |
375 | goto fail; | |
376 | ||
377 | mutex_lock(&chip->lock); | |
d4e7ad03 SO |
378 | if (engine->mode == LP5521_CMD_LOAD) |
379 | ret = lp5521_load_program(engine, pattern); | |
380 | else | |
381 | ret = -EINVAL; | |
500fe141 SO |
382 | mutex_unlock(&chip->lock); |
383 | ||
384 | if (ret) { | |
385 | dev_err(&client->dev, "failed loading pattern\n"); | |
386 | return ret; | |
387 | } | |
388 | ||
389 | return len; | |
390 | fail: | |
391 | dev_err(&client->dev, "wrong pattern format\n"); | |
392 | return -EINVAL; | |
393 | } | |
394 | ||
395 | static ssize_t store_engine_load(struct device *dev, | |
396 | struct device_attribute *attr, | |
397 | const char *buf, size_t len, int nr) | |
398 | { | |
399 | struct i2c_client *client = to_i2c_client(dev); | |
400 | struct lp5521_chip *chip = i2c_get_clientdata(client); | |
401 | return lp5521_do_store_load(&chip->engines[nr - 1], buf, len); | |
402 | } | |
403 | ||
404 | #define store_load(nr) \ | |
405 | static ssize_t store_engine##nr##_load(struct device *dev, \ | |
406 | struct device_attribute *attr, \ | |
407 | const char *buf, size_t len) \ | |
408 | { \ | |
409 | return store_engine_load(dev, attr, buf, len, nr); \ | |
410 | } | |
411 | store_load(1) | |
412 | store_load(2) | |
413 | store_load(3) | |
414 | ||
415 | static ssize_t show_engine_mode(struct device *dev, | |
416 | struct device_attribute *attr, | |
417 | char *buf, int nr) | |
418 | { | |
419 | struct i2c_client *client = to_i2c_client(dev); | |
420 | struct lp5521_chip *chip = i2c_get_clientdata(client); | |
421 | switch (chip->engines[nr - 1].mode) { | |
422 | case LP5521_CMD_RUN: | |
423 | return sprintf(buf, "run\n"); | |
424 | case LP5521_CMD_LOAD: | |
425 | return sprintf(buf, "load\n"); | |
426 | case LP5521_CMD_DISABLED: | |
427 | return sprintf(buf, "disabled\n"); | |
428 | default: | |
429 | return sprintf(buf, "disabled\n"); | |
430 | } | |
431 | } | |
432 | ||
433 | #define show_mode(nr) \ | |
434 | static ssize_t show_engine##nr##_mode(struct device *dev, \ | |
435 | struct device_attribute *attr, \ | |
436 | char *buf) \ | |
437 | { \ | |
438 | return show_engine_mode(dev, attr, buf, nr); \ | |
439 | } | |
440 | show_mode(1) | |
441 | show_mode(2) | |
442 | show_mode(3) | |
443 | ||
444 | static ssize_t store_engine_mode(struct device *dev, | |
445 | struct device_attribute *attr, | |
446 | const char *buf, size_t len, int nr) | |
447 | { | |
448 | struct i2c_client *client = to_i2c_client(dev); | |
449 | struct lp5521_chip *chip = i2c_get_clientdata(client); | |
450 | struct lp5521_engine *engine = &chip->engines[nr - 1]; | |
451 | mutex_lock(&chip->lock); | |
452 | ||
453 | if (!strncmp(buf, "run", 3)) | |
454 | lp5521_set_mode(engine, LP5521_CMD_RUN); | |
455 | else if (!strncmp(buf, "load", 4)) | |
456 | lp5521_set_mode(engine, LP5521_CMD_LOAD); | |
457 | else if (!strncmp(buf, "disabled", 8)) | |
458 | lp5521_set_mode(engine, LP5521_CMD_DISABLED); | |
459 | ||
460 | mutex_unlock(&chip->lock); | |
461 | return len; | |
462 | } | |
463 | ||
464 | #define store_mode(nr) \ | |
465 | static ssize_t store_engine##nr##_mode(struct device *dev, \ | |
466 | struct device_attribute *attr, \ | |
467 | const char *buf, size_t len) \ | |
468 | { \ | |
469 | return store_engine_mode(dev, attr, buf, len, nr); \ | |
470 | } | |
471 | store_mode(1) | |
472 | store_mode(2) | |
473 | store_mode(3) | |
474 | ||
475 | static ssize_t show_max_current(struct device *dev, | |
476 | struct device_attribute *attr, | |
477 | char *buf) | |
478 | { | |
479 | struct led_classdev *led_cdev = dev_get_drvdata(dev); | |
480 | struct lp5521_led *led = cdev_to_led(led_cdev); | |
481 | ||
482 | return sprintf(buf, "%d\n", led->max_current); | |
483 | } | |
484 | ||
485 | static ssize_t show_current(struct device *dev, | |
486 | struct device_attribute *attr, | |
487 | char *buf) | |
488 | { | |
489 | struct led_classdev *led_cdev = dev_get_drvdata(dev); | |
490 | struct lp5521_led *led = cdev_to_led(led_cdev); | |
491 | ||
492 | return sprintf(buf, "%d\n", led->led_current); | |
493 | } | |
494 | ||
495 | static ssize_t store_current(struct device *dev, | |
496 | struct device_attribute *attr, | |
497 | const char *buf, size_t len) | |
498 | { | |
499 | struct led_classdev *led_cdev = dev_get_drvdata(dev); | |
500 | struct lp5521_led *led = cdev_to_led(led_cdev); | |
501 | struct lp5521_chip *chip = led_to_lp5521(led); | |
502 | ssize_t ret; | |
503 | unsigned long curr; | |
504 | ||
011af7bc | 505 | if (kstrtoul(buf, 0, &curr)) |
500fe141 SO |
506 | return -EINVAL; |
507 | ||
508 | if (curr > led->max_current) | |
509 | return -EINVAL; | |
510 | ||
511 | mutex_lock(&chip->lock); | |
512 | ret = lp5521_set_led_current(chip, led->id, curr); | |
513 | mutex_unlock(&chip->lock); | |
514 | ||
515 | if (ret < 0) | |
516 | return ret; | |
517 | ||
518 | led->led_current = (u8)curr; | |
519 | ||
520 | return len; | |
521 | } | |
522 | ||
523 | static ssize_t lp5521_selftest(struct device *dev, | |
524 | struct device_attribute *attr, | |
525 | char *buf) | |
526 | { | |
527 | struct i2c_client *client = to_i2c_client(dev); | |
528 | struct lp5521_chip *chip = i2c_get_clientdata(client); | |
529 | int ret; | |
530 | ||
531 | mutex_lock(&chip->lock); | |
532 | ret = lp5521_run_selftest(chip, buf); | |
533 | mutex_unlock(&chip->lock); | |
534 | return sprintf(buf, "%s\n", ret ? "FAIL" : "OK"); | |
535 | } | |
536 | ||
011af7bc KM |
537 | static void lp5521_clear_program_memory(struct i2c_client *cl) |
538 | { | |
539 | int i; | |
540 | u8 rgb_mem[] = { | |
541 | LP5521_REG_R_PROG_MEM, | |
542 | LP5521_REG_G_PROG_MEM, | |
543 | LP5521_REG_B_PROG_MEM, | |
544 | }; | |
545 | ||
546 | for (i = 0; i < ARRAY_SIZE(rgb_mem); i++) { | |
547 | lp5521_write(cl, rgb_mem[i], 0); | |
548 | lp5521_write(cl, rgb_mem[i] + 1, 0); | |
549 | } | |
550 | } | |
551 | ||
552 | static void lp5521_write_program_memory(struct i2c_client *cl, | |
553 | u8 base, u8 *rgb, int size) | |
554 | { | |
555 | int i; | |
556 | ||
557 | if (!rgb || size <= 0) | |
558 | return; | |
559 | ||
560 | for (i = 0; i < size; i++) | |
561 | lp5521_write(cl, base + i, *(rgb + i)); | |
562 | ||
563 | lp5521_write(cl, base + i, 0); | |
564 | lp5521_write(cl, base + i + 1, 0); | |
565 | } | |
566 | ||
567 | static inline struct lp5521_led_pattern *lp5521_get_pattern | |
568 | (struct lp5521_chip *chip, u8 offset) | |
569 | { | |
570 | struct lp5521_led_pattern *ptn; | |
571 | ptn = chip->pdata->patterns + (offset - 1); | |
572 | return ptn; | |
573 | } | |
574 | ||
575 | static void lp5521_run_led_pattern(int mode, struct lp5521_chip *chip) | |
576 | { | |
577 | struct lp5521_led_pattern *ptn; | |
578 | struct i2c_client *cl = chip->client; | |
579 | int num_patterns = chip->pdata->num_patterns; | |
580 | ||
581 | if (mode > num_patterns || !(chip->pdata->patterns)) | |
582 | return; | |
583 | ||
584 | if (mode == PATTERN_OFF) { | |
32a2f747 | 585 | lp5521_write(cl, LP5521_REG_ENABLE, LP5521_ENABLE_DEFAULT); |
011af7bc KM |
586 | usleep_range(1000, 2000); |
587 | lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); | |
588 | } else { | |
589 | ptn = lp5521_get_pattern(chip, mode); | |
590 | if (!ptn) | |
591 | return; | |
592 | ||
593 | lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_LOAD); | |
594 | usleep_range(1000, 2000); | |
595 | ||
596 | lp5521_clear_program_memory(cl); | |
597 | ||
598 | lp5521_write_program_memory(cl, LP5521_REG_R_PROG_MEM, | |
599 | ptn->r, ptn->size_r); | |
600 | lp5521_write_program_memory(cl, LP5521_REG_G_PROG_MEM, | |
601 | ptn->g, ptn->size_g); | |
602 | lp5521_write_program_memory(cl, LP5521_REG_B_PROG_MEM, | |
603 | ptn->b, ptn->size_b); | |
604 | ||
605 | lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_RUN); | |
606 | usleep_range(1000, 2000); | |
32a2f747 | 607 | lp5521_write(cl, LP5521_REG_ENABLE, LP5521_ENABLE_RUN_PROGRAM); |
011af7bc KM |
608 | } |
609 | } | |
610 | ||
611 | static ssize_t store_led_pattern(struct device *dev, | |
612 | struct device_attribute *attr, | |
613 | const char *buf, size_t len) | |
614 | { | |
615 | struct lp5521_chip *chip = i2c_get_clientdata(to_i2c_client(dev)); | |
616 | unsigned long val; | |
617 | int ret; | |
618 | ||
619 | ret = strict_strtoul(buf, 16, &val); | |
620 | if (ret) | |
621 | return ret; | |
622 | ||
623 | lp5521_run_led_pattern(val, chip); | |
624 | ||
625 | return len; | |
626 | } | |
627 | ||
500fe141 | 628 | /* led class device attributes */ |
67d1da79 | 629 | static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, show_current, store_current); |
500fe141 SO |
630 | static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL); |
631 | ||
632 | static struct attribute *lp5521_led_attributes[] = { | |
633 | &dev_attr_led_current.attr, | |
634 | &dev_attr_max_current.attr, | |
635 | NULL, | |
636 | }; | |
637 | ||
638 | static struct attribute_group lp5521_led_attribute_group = { | |
639 | .attrs = lp5521_led_attributes | |
640 | }; | |
641 | ||
642 | /* device attributes */ | |
67d1da79 | 643 | static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUSR, |
500fe141 | 644 | show_engine1_mode, store_engine1_mode); |
67d1da79 | 645 | static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUSR, |
500fe141 | 646 | show_engine2_mode, store_engine2_mode); |
67d1da79 | 647 | static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUSR, |
500fe141 | 648 | show_engine3_mode, store_engine3_mode); |
67d1da79 VK |
649 | static DEVICE_ATTR(engine1_load, S_IWUSR, NULL, store_engine1_load); |
650 | static DEVICE_ATTR(engine2_load, S_IWUSR, NULL, store_engine2_load); | |
651 | static DEVICE_ATTR(engine3_load, S_IWUSR, NULL, store_engine3_load); | |
500fe141 | 652 | static DEVICE_ATTR(selftest, S_IRUGO, lp5521_selftest, NULL); |
011af7bc | 653 | static DEVICE_ATTR(led_pattern, S_IWUSR, NULL, store_led_pattern); |
500fe141 SO |
654 | |
655 | static struct attribute *lp5521_attributes[] = { | |
656 | &dev_attr_engine1_mode.attr, | |
657 | &dev_attr_engine2_mode.attr, | |
658 | &dev_attr_engine3_mode.attr, | |
659 | &dev_attr_selftest.attr, | |
500fe141 | 660 | &dev_attr_engine1_load.attr, |
500fe141 | 661 | &dev_attr_engine2_load.attr, |
500fe141 | 662 | &dev_attr_engine3_load.attr, |
011af7bc | 663 | &dev_attr_led_pattern.attr, |
500fe141 SO |
664 | NULL |
665 | }; | |
666 | ||
667 | static const struct attribute_group lp5521_group = { | |
668 | .attrs = lp5521_attributes, | |
669 | }; | |
670 | ||
500fe141 SO |
671 | static int lp5521_register_sysfs(struct i2c_client *client) |
672 | { | |
673 | struct device *dev = &client->dev; | |
674 | return sysfs_create_group(&dev->kobj, &lp5521_group); | |
675 | } | |
676 | ||
677 | static void lp5521_unregister_sysfs(struct i2c_client *client) | |
678 | { | |
679 | struct lp5521_chip *chip = i2c_get_clientdata(client); | |
680 | struct device *dev = &client->dev; | |
681 | int i; | |
682 | ||
683 | sysfs_remove_group(&dev->kobj, &lp5521_group); | |
684 | ||
500fe141 SO |
685 | for (i = 0; i < chip->num_leds; i++) |
686 | sysfs_remove_group(&chip->leds[i].cdev.dev->kobj, | |
687 | &lp5521_led_attribute_group); | |
688 | } | |
689 | ||
98ea1ea2 | 690 | static int lp5521_init_led(struct lp5521_led *led, |
500fe141 SO |
691 | struct i2c_client *client, |
692 | int chan, struct lp5521_platform_data *pdata) | |
693 | { | |
694 | struct device *dev = &client->dev; | |
695 | char name[32]; | |
696 | int res; | |
697 | ||
698 | if (chan >= LP5521_MAX_LEDS) | |
699 | return -EINVAL; | |
700 | ||
701 | if (pdata->led_config[chan].led_current == 0) | |
702 | return 0; | |
703 | ||
704 | led->led_current = pdata->led_config[chan].led_current; | |
705 | led->max_current = pdata->led_config[chan].max_current; | |
706 | led->chan_nr = pdata->led_config[chan].chan_nr; | |
707 | ||
708 | if (led->chan_nr >= LP5521_MAX_LEDS) { | |
709 | dev_err(dev, "Use channel numbers between 0 and %d\n", | |
710 | LP5521_MAX_LEDS - 1); | |
711 | return -EINVAL; | |
712 | } | |
713 | ||
500fe141 | 714 | led->cdev.brightness_set = lp5521_set_brightness; |
5ae4e8a7 KM |
715 | if (pdata->led_config[chan].name) { |
716 | led->cdev.name = pdata->led_config[chan].name; | |
717 | } else { | |
718 | snprintf(name, sizeof(name), "%s:channel%d", | |
719 | pdata->label ?: client->name, chan); | |
720 | led->cdev.name = name; | |
721 | } | |
722 | ||
500fe141 SO |
723 | res = led_classdev_register(dev, &led->cdev); |
724 | if (res < 0) { | |
725 | dev_err(dev, "couldn't register led on channel %d\n", chan); | |
726 | return res; | |
727 | } | |
728 | ||
729 | res = sysfs_create_group(&led->cdev.dev->kobj, | |
730 | &lp5521_led_attribute_group); | |
731 | if (res < 0) { | |
732 | dev_err(dev, "couldn't register current attribute\n"); | |
733 | led_classdev_unregister(&led->cdev); | |
734 | return res; | |
735 | } | |
736 | return 0; | |
737 | } | |
738 | ||
98ea1ea2 | 739 | static int lp5521_probe(struct i2c_client *client, |
500fe141 SO |
740 | const struct i2c_device_id *id) |
741 | { | |
742 | struct lp5521_chip *chip; | |
743 | struct lp5521_platform_data *pdata; | |
744 | int ret, i, led; | |
b3c49c05 | 745 | u8 buf; |
500fe141 | 746 | |
e430dc00 | 747 | chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); |
500fe141 SO |
748 | if (!chip) |
749 | return -ENOMEM; | |
750 | ||
751 | i2c_set_clientdata(client, chip); | |
752 | chip->client = client; | |
753 | ||
754 | pdata = client->dev.platform_data; | |
755 | ||
756 | if (!pdata) { | |
757 | dev_err(&client->dev, "no platform data\n"); | |
e430dc00 | 758 | return -EINVAL; |
500fe141 SO |
759 | } |
760 | ||
761 | mutex_init(&chip->lock); | |
762 | ||
763 | chip->pdata = pdata; | |
764 | ||
765 | if (pdata->setup_resources) { | |
766 | ret = pdata->setup_resources(); | |
767 | if (ret < 0) | |
e430dc00 | 768 | return ret; |
500fe141 SO |
769 | } |
770 | ||
771 | if (pdata->enable) { | |
772 | pdata->enable(0); | |
09c76b0f | 773 | usleep_range(1000, 2000); /* Keep enable down at least 1ms */ |
500fe141 | 774 | pdata->enable(1); |
09c76b0f | 775 | usleep_range(1000, 2000); /* 500us abs min. */ |
500fe141 SO |
776 | } |
777 | ||
95ea8eec SO |
778 | lp5521_write(client, LP5521_REG_RESET, 0xff); |
779 | usleep_range(10000, 20000); /* | |
780 | * Exact value is not available. 10 - 20ms | |
781 | * appears to be enough for reset. | |
782 | */ | |
b3c49c05 SK |
783 | |
784 | /* | |
785 | * Make sure that the chip is reset by reading back the r channel | |
786 | * current reg. This is dummy read is required on some platforms - | |
787 | * otherwise further access to the R G B channels in the | |
788 | * LP5521_REG_ENABLE register will not have any effect - strange! | |
789 | */ | |
42960b76 | 790 | ret = lp5521_read(client, LP5521_REG_R_CURRENT, &buf); |
5bc9ad77 | 791 | if (ret || buf != LP5521_REG_R_CURR_DEFAULT) { |
3a2fd4a1 | 792 | dev_err(&client->dev, "error in resetting chip\n"); |
b3c49c05 SK |
793 | goto fail2; |
794 | } | |
795 | usleep_range(10000, 20000); | |
796 | ||
500fe141 SO |
797 | ret = lp5521_detect(client); |
798 | ||
799 | if (ret) { | |
800 | dev_err(&client->dev, "Chip not found\n"); | |
801 | goto fail2; | |
802 | } | |
803 | ||
804 | dev_info(&client->dev, "%s programmable led chip found\n", id->name); | |
805 | ||
d4e7ad03 | 806 | ret = lp5521_configure(client); |
500fe141 SO |
807 | if (ret < 0) { |
808 | dev_err(&client->dev, "error configuring chip\n"); | |
e430dc00 | 809 | goto fail1; |
500fe141 SO |
810 | } |
811 | ||
812 | /* Initialize leds */ | |
813 | chip->num_channels = pdata->num_channels; | |
814 | chip->num_leds = 0; | |
815 | led = 0; | |
816 | for (i = 0; i < pdata->num_channels; i++) { | |
817 | /* Do not initialize channels that are not connected */ | |
818 | if (pdata->led_config[i].led_current == 0) | |
819 | continue; | |
820 | ||
821 | ret = lp5521_init_led(&chip->leds[led], client, i, pdata); | |
822 | if (ret) { | |
823 | dev_err(&client->dev, "error initializing leds\n"); | |
e430dc00 | 824 | goto fail2; |
500fe141 SO |
825 | } |
826 | chip->num_leds++; | |
827 | ||
828 | chip->leds[led].id = led; | |
829 | /* Set initial LED current */ | |
830 | lp5521_set_led_current(chip, led, | |
831 | chip->leds[led].led_current); | |
832 | ||
833 | INIT_WORK(&(chip->leds[led].brightness_work), | |
834 | lp5521_led_brightness_work); | |
835 | ||
836 | led++; | |
837 | } | |
838 | ||
839 | ret = lp5521_register_sysfs(client); | |
840 | if (ret) { | |
841 | dev_err(&client->dev, "registering sysfs failed\n"); | |
e430dc00 | 842 | goto fail2; |
500fe141 SO |
843 | } |
844 | return ret; | |
e430dc00 | 845 | fail2: |
500fe141 SO |
846 | for (i = 0; i < chip->num_leds; i++) { |
847 | led_classdev_unregister(&chip->leds[i].cdev); | |
848 | cancel_work_sync(&chip->leds[i].brightness_work); | |
849 | } | |
e430dc00 | 850 | fail1: |
500fe141 SO |
851 | if (pdata->enable) |
852 | pdata->enable(0); | |
853 | if (pdata->release_resources) | |
854 | pdata->release_resources(); | |
500fe141 SO |
855 | return ret; |
856 | } | |
857 | ||
678e8a6b | 858 | static int lp5521_remove(struct i2c_client *client) |
500fe141 SO |
859 | { |
860 | struct lp5521_chip *chip = i2c_get_clientdata(client); | |
861 | int i; | |
862 | ||
011af7bc | 863 | lp5521_run_led_pattern(PATTERN_OFF, chip); |
500fe141 SO |
864 | lp5521_unregister_sysfs(client); |
865 | ||
866 | for (i = 0; i < chip->num_leds; i++) { | |
867 | led_classdev_unregister(&chip->leds[i].cdev); | |
868 | cancel_work_sync(&chip->leds[i].brightness_work); | |
869 | } | |
870 | ||
871 | if (chip->pdata->enable) | |
872 | chip->pdata->enable(0); | |
873 | if (chip->pdata->release_resources) | |
874 | chip->pdata->release_resources(); | |
500fe141 SO |
875 | return 0; |
876 | } | |
877 | ||
878 | static const struct i2c_device_id lp5521_id[] = { | |
879 | { "lp5521", 0 }, /* Three channel chip */ | |
880 | { } | |
881 | }; | |
882 | MODULE_DEVICE_TABLE(i2c, lp5521_id); | |
883 | ||
884 | static struct i2c_driver lp5521_driver = { | |
885 | .driver = { | |
886 | .name = "lp5521", | |
887 | }, | |
888 | .probe = lp5521_probe, | |
df07cf81 | 889 | .remove = lp5521_remove, |
500fe141 SO |
890 | .id_table = lp5521_id, |
891 | }; | |
892 | ||
09a0d183 | 893 | module_i2c_driver(lp5521_driver); |
500fe141 SO |
894 | |
895 | MODULE_AUTHOR("Mathias Nyman, Yuri Zaporozhets, Samu Onkalo"); | |
896 | MODULE_DESCRIPTION("LP5521 LED engine"); | |
897 | MODULE_LICENSE("GPL v2"); |