[linux.git] / drivers / ata / pata_rdc.c

/*
 *  pata_rdc		-	Driver for later RDC PATA controllers
 *
 *  This is actually a driver for hardware meeting
 *  INCITS 370-2004 (1510D): ATA Host Adapter Standards
 *
 *  Based on ata_piix.
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2, or (at your option)
 *  any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; see the file COPYING.  If not, write to
 *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/gfp.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <linux/dmi.h>

#define DRV_NAME	"pata_rdc"
#define DRV_VERSION	"0.01"

struct rdc_host_priv {
	u32 saved_iocfg;
};

/**
 *	rdc_pata_cable_detect - Probe host controller cable detect info
 *	@ap: Port for which cable detect info is desired
 *
 *	Read 80c cable indicator from ATA PCI device's PCI config
 *	register.  This register is normally set by firmware (BIOS).
 *
 *	LOCKING:
 *	None (inherited from caller).
 */

static int rdc_pata_cable_detect(struct ata_port *ap)
{
	struct rdc_host_priv *hpriv = ap->host->private_data;
	u8 mask;

	/* check BIOS cable detect results */
	mask = 0x30 << (2 * ap->port_no);
	if ((hpriv->saved_iocfg & mask) == 0)
		return ATA_CBL_PATA40;
	return ATA_CBL_PATA80;
}

/**
 *	rdc_pata_prereset - prereset for PATA host controller
 *	@link: Target link
 *	@deadline: deadline jiffies for the operation
 *
 *	LOCKING:
 *	None (inherited from caller).
 */
static int rdc_pata_prereset(struct ata_link *link, unsigned long deadline)
{
	struct ata_port *ap = link->ap;
	struct pci_dev *pdev = to_pci_dev(ap->host->dev);

	static const struct pci_bits rdc_enable_bits[] = {
		{ 0x41U, 1U, 0x80UL, 0x80UL },	/* port 0 */
		{ 0x43U, 1U, 0x80UL, 0x80UL },	/* port 1 */
	};

	if (!pci_test_config_bits(pdev, &rdc_enable_bits[ap->port_no]))
		return -ENOENT;
	return ata_sff_prereset(link, deadline);
}

static DEFINE_SPINLOCK(rdc_lock);

/**
 *	rdc_set_piomode - Initialize host controller PATA PIO timings
 *	@ap: Port whose timings we are configuring
 *	@adev: um
 *
 *	Set PIO mode for device, in host controller PCI config space.
 *
 *	LOCKING:
 *	None (inherited from caller).
 */

static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
	unsigned int pio	= adev->pio_mode - XFER_PIO_0;
	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
	unsigned long flags;
	unsigned int is_slave	= (adev->devno != 0);
	unsigned int master_port= ap->port_no ? 0x42 : 0x40;
	unsigned int slave_port	= 0x44;
	u16 master_data;
	u8 slave_data;
	u8 udma_enable;
	int control = 0;

	static const	 /* ISP  RTC */
	u8 timings[][2]	= { { 0, 0 },
			    { 0, 0 },
			    { 1, 0 },
			    { 2, 1 },
			    { 2, 3 }, };

	if (pio >= 2)
		control |= 1;	/* TIME1 enable */
	if (ata_pio_need_iordy(adev))
		control |= 2;	/* IE enable */

	if (adev->class == ATA_DEV_ATA)
		control |= 4;	/* PPE enable */

	spin_lock_irqsave(&rdc_lock, flags);

	/* PIO configuration clears DTE unconditionally.  It will be
	 * programmed in set_dmamode which is guaranteed to be called
	 * after set_piomode if any DMA mode is available.
	 */
	pci_read_config_word(dev, master_port, &master_data);
	if (is_slave) {
		/* clear TIME1|IE1|PPE1|DTE1 */
		master_data &= 0xff0f;
		/* Enable SITRE (separate slave timing register) */
		master_data |= 0x4000;
		/* enable PPE1, IE1 and TIME1 as needed */
		master_data |= (control << 4);
		pci_read_config_byte(dev, slave_port, &slave_data);
		slave_data &= (ap->port_no ? 0x0f : 0xf0);
		/* Load the timing nibble for this slave */
		slave_data |= ((timings[pio][0] << 2) | timings[pio][1])
						<< (ap->port_no ? 4 : 0);
	} else {
		/* clear ISP|RCT|TIME0|IE0|PPE0|DTE0 */
		master_data &= 0xccf0;
		/* Enable PPE, IE and TIME as appropriate */
		master_data |= control;
		/* load ISP and RCT */
		master_data |=
			(timings[pio][0] << 12) |
			(timings[pio][1] << 8);
	}
	pci_write_config_word(dev, master_port, master_data);
	if (is_slave)
		pci_write_config_byte(dev, slave_port, slave_data);

	/* Ensure the UDMA bit is off - it will be turned back on if
	   UDMA is selected */

	pci_read_config_byte(dev, 0x48, &udma_enable);
	udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
	pci_write_config_byte(dev, 0x48, udma_enable);

	spin_unlock_irqrestore(&rdc_lock, flags);
}

/**
 *	rdc_set_dmamode - Initialize host controller PATA PIO timings
 *	@ap: Port whose timings we are configuring
 *	@adev: Drive in question
 *
 *	Set UDMA mode for device, in host controller PCI config space.
 *
 *	LOCKING:
 *	None (inherited from caller).
 */

static void rdc_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
	unsigned long flags;
	u8 master_port		= ap->port_no ? 0x42 : 0x40;
	u16 master_data;
	u8 speed		= adev->dma_mode;
	int devid		= adev->devno + 2 * ap->port_no;
	u8 udma_enable		= 0;

	static const	 /* ISP  RTC */
	u8 timings[][2]	= { { 0, 0 },
			    { 0, 0 },
			    { 1, 0 },
			    { 2, 1 },
			    { 2, 3 }, };

	spin_lock_irqsave(&rdc_lock, flags);

	pci_read_config_word(dev, master_port, &master_data);
	pci_read_config_byte(dev, 0x48, &udma_enable);

	if (speed >= XFER_UDMA_0) {
		unsigned int udma = adev->dma_mode - XFER_UDMA_0;
		u16 udma_timing;
		u16 ideconf;
		int u_clock, u_speed;

		/*
		 * UDMA is handled by a combination of clock switching and
		 * selection of dividers
		 *
		 * Handy rule: Odd modes are UDMATIMx 01, even are 02
		 *	       except UDMA0 which is 00
		 */
		u_speed = min(2 - (udma & 1), udma);
		if (udma == 5)
			u_clock = 0x1000;	/* 100Mhz */
		else if (udma > 2)
			u_clock = 1;		/* 66Mhz */
		else
			u_clock = 0;		/* 33Mhz */

		udma_enable |= (1 << devid);

		/* Load the CT/RP selection */
		pci_read_config_word(dev, 0x4A, &udma_timing);
		udma_timing &= ~(3 << (4 * devid));
		udma_timing |= u_speed << (4 * devid);
		pci_write_config_word(dev, 0x4A, udma_timing);

		/* Select a 33/66/100Mhz clock */
		pci_read_config_word(dev, 0x54, &ideconf);
		ideconf &= ~(0x1001 << devid);
		ideconf |= u_clock << devid;
		pci_write_config_word(dev, 0x54, ideconf);
	} else {
		/*
		 * MWDMA is driven by the PIO timings. We must also enable
		 * IORDY unconditionally along with TIME1. PPE has already
		 * been set when the PIO timing was set.
		 */
		unsigned int mwdma	= adev->dma_mode - XFER_MW_DMA_0;
		unsigned int control;
		u8 slave_data;
		const unsigned int needed_pio[3] = {
			XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
		};
		int pio = needed_pio[mwdma] - XFER_PIO_0;

		control = 3;	/* IORDY|TIME1 */

		/* If the drive MWDMA is faster than it can do PIO then
		   we must force PIO into PIO0 */

		if (adev->pio_mode < needed_pio[mwdma])
			/* Enable DMA timing only */
			control |= 8;	/* PIO cycles in PIO0 */

		if (adev->devno) {	/* Slave */
			master_data &= 0xFF4F;  /* Mask out IORDY|TIME1|DMAONLY */
			master_data |= control << 4;
			pci_read_config_byte(dev, 0x44, &slave_data);
			slave_data &= (ap->port_no ? 0x0f : 0xf0);
			/* Load the matching timing */
			slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
			pci_write_config_byte(dev, 0x44, slave_data);
		} else { 	/* Master */
			master_data &= 0xCCF4;	/* Mask out IORDY|TIME1|DMAONLY
						   and master timing bits */
			master_data |= control;
			master_data |=
				(timings[pio][0] << 12) |
				(timings[pio][1] << 8);
		}

		udma_enable &= ~(1 << devid);
		pci_write_config_word(dev, master_port, master_data);
	}
	pci_write_config_byte(dev, 0x48, udma_enable);

	spin_unlock_irqrestore(&rdc_lock, flags);
}

static struct ata_port_operations rdc_pata_ops = {
	.inherits		= &ata_bmdma32_port_ops,
	.cable_detect		= rdc_pata_cable_detect,
	.set_piomode		= rdc_set_piomode,
	.set_dmamode		= rdc_set_dmamode,
	.prereset		= rdc_pata_prereset,
};

static struct ata_port_info rdc_port_info = {

	.flags		= ATA_FLAG_SLAVE_POSS,
	.pio_mask	= ATA_PIO4,
	.mwdma_mask	= ATA_MWDMA12_ONLY,
	.udma_mask	= ATA_UDMA5,
	.port_ops	= &rdc_pata_ops,
};

static struct scsi_host_template rdc_sht = {
	ATA_BMDMA_SHT(DRV_NAME),
};

/**
 *	rdc_init_one - Register PIIX ATA PCI device with kernel services
 *	@pdev: PCI device to register
 *	@ent: Entry in rdc_pci_tbl matching with @pdev
 *
 *	Called from kernel PCI layer.  We probe for combined mode (sigh),
 *	and then hand over control to libata, for it to do the rest.
 *
 *	LOCKING:
 *	Inherited from PCI layer (may sleep).
 *
 *	RETURNS:
 *	Zero on success, or -ERRNO value.
 */

static int rdc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
	struct device *dev = &pdev->dev;
	struct ata_port_info port_info[2];
	const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] };
	struct ata_host *host;
	struct rdc_host_priv *hpriv;
	int rc;

	ata_print_version_once(&pdev->dev, DRV_VERSION);

	port_info[0] = rdc_port_info;
	port_info[1] = rdc_port_info;

	/* enable device and prepare host */
	rc = pcim_enable_device(pdev);
	if (rc)
		return rc;

	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
	if (!hpriv)
		return -ENOMEM;

	/* Save IOCFG, this will be used for cable detection, quirk
	 * detection and restoration on detach.
	 */
	pci_read_config_dword(pdev, 0x54, &hpriv->saved_iocfg);

	rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
	if (rc)
		return rc;
	host->private_data = hpriv;

	pci_intx(pdev, 1);

	host->flags |= ATA_HOST_PARALLEL_SCAN;

	pci_set_master(pdev);
	return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, &rdc_sht);
}

static void rdc_remove_one(struct pci_dev *pdev)
{
	struct ata_host *host = pci_get_drvdata(pdev);
	struct rdc_host_priv *hpriv = host->private_data;

	pci_write_config_dword(pdev, 0x54, hpriv->saved_iocfg);

	ata_pci_remove_one(pdev);
}

static const struct pci_device_id rdc_pci_tbl[] = {
	{ PCI_DEVICE(0x17F3, 0x1011), },
	{ PCI_DEVICE(0x17F3, 0x1012), },
	{ }	/* terminate list */
};

static struct pci_driver rdc_pci_driver = {
	.name			= DRV_NAME,
	.id_table		= rdc_pci_tbl,
	.probe			= rdc_init_one,
	.remove			= rdc_remove_one,
#ifdef CONFIG_PM
	.suspend		= ata_pci_device_suspend,
	.resume			= ata_pci_device_resume,
#endif
};


module_pci_driver(rdc_pci_driver);

MODULE_AUTHOR("Alan Cox (based on ata_piix)");
MODULE_DESCRIPTION("SCSI low-level driver for RDC PATA controllers");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, rdc_pci_tbl);
MODULE_VERSION(DRV_VERSION);
Commit	Line	Data
6b406782 AC	1	/*
	2	* pata_rdc - Driver for later RDC PATA controllers
	3	*
	4	* This is actually a driver for hardware meeting
	5	* INCITS 370-2004 (1510D): ATA Host Adapter Standards
	6	*
	7	* Based on ata_piix.
	8	*
	9	* This program is free software; you can redistribute it and/or modify
	10	* it under the terms of the GNU General Public License as published by
	11	* the Free Software Foundation; either version 2, or (at your option)
	12	* any later version.
	13	*
	14	* This program is distributed in the hope that it will be useful,
	15	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	17	* GNU General Public License for more details.
	18	*
	19	* You should have received a copy of the GNU General Public License
	20	* along with this program; see the file COPYING. If not, write to
	21	* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
	22	*/
	23
	24	#include <linux/kernel.h>
	25	#include <linux/module.h>
	26	#include <linux/pci.h>
	27	#include <linux/init.h>
	28	#include <linux/blkdev.h>
	29	#include <linux/delay.h>
	30	#include <linux/device.h>
5a0e3ad6	31	#include <linux/gfp.h>
6b406782 AC	32	#include <scsi/scsi_host.h>
	33	#include <linux/libata.h>
	34	#include <linux/dmi.h>
	35
	36	#define DRV_NAME "pata_rdc"
	37	#define DRV_VERSION "0.01"
	38
	39	struct rdc_host_priv {
	40	u32 saved_iocfg;
	41	};
	42
	43	/**
	44	* rdc_pata_cable_detect - Probe host controller cable detect info
	45	* @ap: Port for which cable detect info is desired
	46	*
	47	* Read 80c cable indicator from ATA PCI device's PCI config
	48	* register. This register is normally set by firmware (BIOS).
	49	*
	50	* LOCKING:
	51	* None (inherited from caller).
	52	*/
	53
	54	static int rdc_pata_cable_detect(struct ata_port *ap)
	55	{
	56	struct rdc_host_priv *hpriv = ap->host->private_data;
	57	u8 mask;
	58
	59	/* check BIOS cable detect results */
	60	mask = 0x30 << (2 * ap->port_no);
	61	if ((hpriv->saved_iocfg & mask) == 0)
	62	return ATA_CBL_PATA40;
	63	return ATA_CBL_PATA80;
	64	}
	65
	66	/**
	67	* rdc_pata_prereset - prereset for PATA host controller
	68	* @link: Target link
	69	* @deadline: deadline jiffies for the operation
	70	*
	71	* LOCKING:
	72	* None (inherited from caller).
	73	*/
	74	static int rdc_pata_prereset(struct ata_link *link, unsigned long deadline)
	75	{
	76	struct ata_port *ap = link->ap;
	77	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	78
	79	static const struct pci_bits rdc_enable_bits[] = {
	80	{ 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */
	81	{ 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */
	82	};
	83
	84	if (!pci_test_config_bits(pdev, &rdc_enable_bits[ap->port_no]))
	85	return -ENOENT;
	86	return ata_sff_prereset(link, deadline);
	87	}
	88
bb612cba BZ	89	static DEFINE_SPINLOCK(rdc_lock);
bb612cba BZ	90
6b406782 AC	91	/**
	92	* rdc_set_piomode - Initialize host controller PATA PIO timings
	93	* @ap: Port whose timings we are configuring
	94	* @adev: um
	95	*
	96	* Set PIO mode for device, in host controller PCI config space.
	97	*
	98	* LOCKING:
	99	* None (inherited from caller).
	100	*/
	101
	102	static void rdc_set_piomode(struct ata_port ap, struct ata_device adev)
	103	{
	104	unsigned int pio = adev->pio_mode - XFER_PIO_0;
	105	struct pci_dev *dev = to_pci_dev(ap->host->dev);
bb612cba	106	unsigned long flags;
6b406782 AC	107	unsigned int is_slave = (adev->devno != 0);
	108	unsigned int master_port= ap->port_no ? 0x42 : 0x40;
	109	unsigned int slave_port = 0x44;
	110	u16 master_data;
	111	u8 slave_data;
	112	u8 udma_enable;
	113	int control = 0;
	114
	115	static const /* ISP RTC */
	116	u8 timings[][2] = { { 0, 0 },
	117	{ 0, 0 },
	118	{ 1, 0 },
	119	{ 2, 1 },
	120	{ 2, 3 }, };
	121
	122	if (pio >= 2)
	123	control \|= 1; /* TIME1 enable */
	124	if (ata_pio_need_iordy(adev))
	125	control \|= 2; /* IE enable */
	126
	127	if (adev->class == ATA_DEV_ATA)
	128	control \|= 4; /* PPE enable */
	129
bb612cba BZ	130	spin_lock_irqsave(&rdc_lock, flags);
bb612cba BZ	131
6b406782 AC	132	/* PIO configuration clears DTE unconditionally. It will be
	133	* programmed in set_dmamode which is guaranteed to be called
	134	* after set_piomode if any DMA mode is available.
	135	*/
	136	pci_read_config_word(dev, master_port, &master_data);
	137	if (is_slave) {
	138	/* clear TIME1\|IE1\|PPE1\|DTE1 */
	139	master_data &= 0xff0f;
	140	/* Enable SITRE (separate slave timing register) */
	141	master_data \|= 0x4000;
	142	/* enable PPE1, IE1 and TIME1 as needed */
	143	master_data \|= (control << 4);
	144	pci_read_config_byte(dev, slave_port, &slave_data);
	145	slave_data &= (ap->port_no ? 0x0f : 0xf0);
	146	/* Load the timing nibble for this slave */
	147	slave_data \|= ((timings[pio][0] << 2) \| timings[pio][1])
	148	<< (ap->port_no ? 4 : 0);
	149	} else {
	150	/* clear ISP\|RCT\|TIME0\|IE0\|PPE0\|DTE0 */
	151	master_data &= 0xccf0;
	152	/* Enable PPE, IE and TIME as appropriate */
	153	master_data \|= control;
	154	/* load ISP and RCT */
	155	master_data \|=
	156	(timings[pio][0] << 12) \|
	157	(timings[pio][1] << 8);
	158	}
	159	pci_write_config_word(dev, master_port, master_data);
	160	if (is_slave)
	161	pci_write_config_byte(dev, slave_port, slave_data);
	162
	163	/* Ensure the UDMA bit is off - it will be turned back on if
	164	UDMA is selected */
	165
	166	pci_read_config_byte(dev, 0x48, &udma_enable);
	167	udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
	168	pci_write_config_byte(dev, 0x48, udma_enable);
bb612cba BZ	169
bb612cba BZ	170	spin_unlock_irqrestore(&rdc_lock, flags);
6b406782 AC	171	}
	172
	173	/**
	174	* rdc_set_dmamode - Initialize host controller PATA PIO timings
	175	* @ap: Port whose timings we are configuring
	176	* @adev: Drive in question
	177	*
	178	* Set UDMA mode for device, in host controller PCI config space.
	179	*
	180	* LOCKING:
	181	* None (inherited from caller).
	182	*/
	183
	184	static void rdc_set_dmamode(struct ata_port ap, struct ata_device adev)
	185	{
	186	struct pci_dev *dev = to_pci_dev(ap->host->dev);
bb612cba	187	unsigned long flags;
6b406782 AC	188	u8 master_port = ap->port_no ? 0x42 : 0x40;
	189	u16 master_data;
	190	u8 speed = adev->dma_mode;
	191	int devid = adev->devno + 2 * ap->port_no;
	192	u8 udma_enable = 0;
	193
	194	static const /* ISP RTC */
	195	u8 timings[][2] = { { 0, 0 },
	196	{ 0, 0 },
	197	{ 1, 0 },
	198	{ 2, 1 },
	199	{ 2, 3 }, };
	200
bb612cba BZ	201	spin_lock_irqsave(&rdc_lock, flags);
bb612cba BZ	202
6b406782 AC	203	pci_read_config_word(dev, master_port, &master_data);
	204	pci_read_config_byte(dev, 0x48, &udma_enable);
	205
	206	if (speed >= XFER_UDMA_0) {
	207	unsigned int udma = adev->dma_mode - XFER_UDMA_0;
	208	u16 udma_timing;
	209	u16 ideconf;
	210	int u_clock, u_speed;
	211
	212	/*
	213	* UDMA is handled by a combination of clock switching and
	214	* selection of dividers
	215	*
	216	* Handy rule: Odd modes are UDMATIMx 01, even are 02
	217	* except UDMA0 which is 00
	218	*/
	219	u_speed = min(2 - (udma & 1), udma);
	220	if (udma == 5)
	221	u_clock = 0x1000; /* 100Mhz */
	222	else if (udma > 2)
	223	u_clock = 1; /* 66Mhz */
	224	else
	225	u_clock = 0; /* 33Mhz */
	226
	227	udma_enable \|= (1 << devid);
	228
	229	/* Load the CT/RP selection */
	230	pci_read_config_word(dev, 0x4A, &udma_timing);
	231	udma_timing &= ~(3 << (4 * devid));
	232	udma_timing \|= u_speed << (4 * devid);
	233	pci_write_config_word(dev, 0x4A, udma_timing);
	234
	235	/* Select a 33/66/100Mhz clock */
	236	pci_read_config_word(dev, 0x54, &ideconf);
	237	ideconf &= ~(0x1001 << devid);
	238	ideconf \|= u_clock << devid;
	239	pci_write_config_word(dev, 0x54, ideconf);
	240	} else {
	241	/*
	242	* MWDMA is driven by the PIO timings. We must also enable
	243	* IORDY unconditionally along with TIME1. PPE has already
	244	* been set when the PIO timing was set.
	245	*/
	246	unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0;
	247	unsigned int control;
	248	u8 slave_data;
	249	const unsigned int needed_pio[3] = {
	250	XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
	251	};
	252	int pio = needed_pio[mwdma] - XFER_PIO_0;
	253
	254	control = 3; /* IORDY\|TIME1 */
	255
	256	/* If the drive MWDMA is faster than it can do PIO then
	257	we must force PIO into PIO0 */
	258
	259	if (adev->pio_mode < needed_pio[mwdma])
	260	/* Enable DMA timing only */
	261	control \|= 8; /* PIO cycles in PIO0 */
	262
	263	if (adev->devno) { /* Slave */
	264	master_data &= 0xFF4F; /* Mask out IORDY\|TIME1\|DMAONLY */
	265	master_data \|= control << 4;
	266	pci_read_config_byte(dev, 0x44, &slave_data);
267	slave_data &= (ap->port_no ? 0x0f : 0xf0);
268	/* Load the matching timing */
269	slave_data \|= ((timings[pio][0] << 2) \| timings[pio][1]) << (ap->port_no ? 4 : 0);
270	pci_write_config_byte(dev, 0x44, slave_data);
271	} else { /* Master */
272	master_data &= 0xCCF4; /* Mask out IORDY\|TIME1\|DMAONLY
273	and master timing bits */
274	master_data \|= control;
275	master_data \|=
276	(timings[pio][0] << 12) \|
277	(timings[pio][1] << 8);
278	}
279
280	udma_enable &= ~(1 << devid);
281	pci_write_config_word(dev, master_port, master_data);
282	}
283	pci_write_config_byte(dev, 0x48, udma_enable);
bb612cba BZ	284
bb612cba BZ	285	spin_unlock_irqrestore(&rdc_lock, flags);
6b406782 AC	286	}
	287
	288	static struct ata_port_operations rdc_pata_ops = {
	289	.inherits = &ata_bmdma32_port_ops,
	290	.cable_detect = rdc_pata_cable_detect,
	291	.set_piomode = rdc_set_piomode,
	292	.set_dmamode = rdc_set_dmamode,
	293	.prereset = rdc_pata_prereset,
	294	};
	295
	296	static struct ata_port_info rdc_port_info = {
	297
	298	.flags = ATA_FLAG_SLAVE_POSS,
	299	.pio_mask = ATA_PIO4,
82563232	300	.mwdma_mask = ATA_MWDMA12_ONLY,
6b406782 AC	301	.udma_mask = ATA_UDMA5,
	302	.port_ops = &rdc_pata_ops,
	303	};
	304
	305	static struct scsi_host_template rdc_sht = {
	306	ATA_BMDMA_SHT(DRV_NAME),
	307	};
	308
	309	/**
	310	* rdc_init_one - Register PIIX ATA PCI device with kernel services
	311	* @pdev: PCI device to register
	312	* @ent: Entry in rdc_pci_tbl matching with @pdev
	313	*
	314	* Called from kernel PCI layer. We probe for combined mode (sigh),
	315	* and then hand over control to libata, for it to do the rest.
	316	*
	317	* LOCKING:
	318	* Inherited from PCI layer (may sleep).
	319	*
	320	* RETURNS:
	321	* Zero on success, or -ERRNO value.
	322	*/
	323
0ec24914	324	static int rdc_init_one(struct pci_dev pdev, const struct pci_device_id ent)
6b406782	325	{
6b406782 AC	326	struct device *dev = &pdev->dev;
	327	struct ata_port_info port_info[2];
	328	const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] };
6b406782 AC	329	struct ata_host *host;
	330	struct rdc_host_priv *hpriv;
	331	int rc;
	332
06296a1e	333	ata_print_version_once(&pdev->dev, DRV_VERSION);
6b406782 AC	334
	335	port_info[0] = rdc_port_info;
	336	port_info[1] = rdc_port_info;
	337
6b406782 AC	338	/* enable device and prepare host */
	339	rc = pcim_enable_device(pdev);
	340	if (rc)
	341	return rc;
	342
	343	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
	344	if (!hpriv)
	345	return -ENOMEM;
	346
	347	/* Save IOCFG, this will be used for cable detection, quirk
	348	* detection and restoration on detach.
	349	*/
	350	pci_read_config_dword(pdev, 0x54, &hpriv->saved_iocfg);
	351
1c5afdf7	352	rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
6b406782 AC	353	if (rc)
	354	return rc;
	355	host->private_data = hpriv;
	356
	357	pci_intx(pdev, 1);
	358
	359	host->flags \|= ATA_HOST_PARALLEL_SCAN;
	360
	361	pci_set_master(pdev);
c3b28894	362	return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, &rdc_sht);
6b406782 AC	363	}
	364
	365	static void rdc_remove_one(struct pci_dev *pdev)
	366	{
0a86e1c8	367	struct ata_host *host = pci_get_drvdata(pdev);
6b406782 AC	368	struct rdc_host_priv *hpriv = host->private_data;
	369
	370	pci_write_config_dword(pdev, 0x54, hpriv->saved_iocfg);
	371
	372	ata_pci_remove_one(pdev);
	373	}
	374
	375	static const struct pci_device_id rdc_pci_tbl[] = {
	376	{ PCI_DEVICE(0x17F3, 0x1011), },
	377	{ PCI_DEVICE(0x17F3, 0x1012), },
	378	{ } /* terminate list */
	379	};
	380
	381	static struct pci_driver rdc_pci_driver = {
	382	.name = DRV_NAME,
	383	.id_table = rdc_pci_tbl,
	384	.probe = rdc_init_one,
	385	.remove = rdc_remove_one,
5a298548 BZ	386	#ifdef CONFIG_PM
	387	.suspend = ata_pci_device_suspend,
	388	.resume = ata_pci_device_resume,
	389	#endif
6b406782 AC	390	};
	391
	392
2fc75da0	393	module_pci_driver(rdc_pci_driver);
6b406782 AC	394
	395	MODULE_AUTHOR("Alan Cox (based on ata_piix)");
	396	MODULE_DESCRIPTION("SCSI low-level driver for RDC PATA controllers");
	397	MODULE_LICENSE("GPL");
	398	MODULE_DEVICE_TABLE(pci, rdc_pci_tbl);
	399	MODULE_VERSION(DRV_VERSION);