[linux.git] / drivers / regulator / Kconfig

menuconfig REGULATOR
	bool "Voltage and Current Regulator Support"
	help
	  Generic Voltage and Current Regulator support.

	  This framework is designed to provide a generic interface to voltage
	  and current regulators within the Linux kernel. It's intended to
	  provide voltage and current control to client or consumer drivers and
	  also provide status information to user space applications through a
	  sysfs interface.

	  The intention is to allow systems to dynamically control regulator
	  output in order to save power and prolong battery life. This applies
	  to both voltage regulators (where voltage output is controllable) and
	  current sinks (where current output is controllable).

	  This framework safely compiles out if not selected so that client
	  drivers can still be used in systems with no software controllable
	  regulators.

	  If unsure, say no.


if REGULATOR

config REGULATOR_DEBUG
	bool "Regulator debug support"
	help
	  Say yes here to enable debugging support.

config REGULATOR_DUMMY
	bool "Provide a dummy regulator if regulator lookups fail"
	help
	  If this option is enabled then when a regulator lookup fails
	  and the board has not specified that it has provided full
	  constraints the regulator core will provide an always
	  enabled dummy regulator, allowing consumer drivers to continue.

	  A warning will be generated when this substitution is done.

config REGULATOR_FIXED_VOLTAGE
	tristate "Fixed voltage regulator support"
	help
	  This driver provides support for fixed voltage regulators,
	  useful for systems which use a combination of software
	  managed regulators and simple non-configurable regulators.

config REGULATOR_VIRTUAL_CONSUMER
	tristate "Virtual regulator consumer support"
	help
	  This driver provides a virtual consumer for the voltage and
	  current regulator API which provides sysfs controls for
	  configuring the supplies requested.  This is mainly useful
	  for test purposes.

	  If unsure, say no.

config REGULATOR_USERSPACE_CONSUMER
	tristate "Userspace regulator consumer support"
	help
	  There are some classes of devices that are controlled entirely
	  from user space. Userspace consumer driver provides ability to
	  control power supplies for such devices.

	  If unsure, say no.

config REGULATOR_GPIO
	tristate "GPIO regulator support"
	depends on GENERIC_GPIO
	help
	  This driver provides support for regulators that can be
	  controlled via gpios.
	  It is capable of supporting current and voltage regulators
	  and the platform has to provide a mapping of GPIO-states
	  to target volts/amps.

config REGULATOR_AD5398
	tristate "Analog Devices AD5398/AD5821 regulators"
	depends on I2C
	help
	  This driver supports AD5398 and AD5821 current regulator chips.
	  If building into module, its name is ad5398.ko.

config REGULATOR_AAT2870
	tristate "AnalogicTech AAT2870 Regulators"
	depends on MFD_AAT2870_CORE
	help
	  If you have a AnalogicTech AAT2870 say Y to enable the
	  regulator driver.

config REGULATOR_ARIZONA
	tristate "Wolfson Arizona class devices"
	depends on MFD_ARIZONA
	help
	  Support for the regulators found on Wolfson Arizona class
	  devices.

config REGULATOR_DA903X
	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
	depends on PMIC_DA903X
	help
	  Say y here to support the BUCKs and LDOs regulators found on
	  Dialog Semiconductor DA9030/DA9034 PMIC.

config REGULATOR_DA9052
	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
	depends on PMIC_DA9052
	help
	  This driver supports the voltage regulators of DA9052-BC and
	  DA9053-AA/Bx PMIC.

config REGULATOR_FAN53555
	tristate "Fairchild FAN53555 Regulator"
	depends on I2C
	select REGMAP_I2C
	help
	  This driver supports Fairchild FAN53555 Digitally Programmable
	  TinyBuck Regulator. The FAN53555 is a step-down switching voltage
	  regulator that delivers a digitally programmable output from an
	  input voltage supply of 2.5V to 5.5V. The output voltage is
	  programmed through an I2C interface.

config REGULATOR_ANATOP
	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
	depends on MFD_SYSCON
	help
	  Say y here to support Freescale i.MX on-chip ANATOP LDOs
	  regulators. It is recommended that this option be
	  enabled on i.MX6 platform.

config REGULATOR_MC13XXX_CORE
	tristate

config REGULATOR_MC13783
	tristate "Freescale MC13783 regulator driver"
	depends on MFD_MC13783
	select REGULATOR_MC13XXX_CORE
	help
	  Say y here to support the regulators found on the Freescale MC13783
	  PMIC.

config REGULATOR_MC13892
	tristate "Freescale MC13892 regulator driver"
	depends on MFD_MC13XXX
	select REGULATOR_MC13XXX_CORE
	help
	  Say y here to support the regulators found on the Freescale MC13892
	  PMIC.

config REGULATOR_ISL6271A
	tristate "Intersil ISL6271A Power regulator"
	depends on I2C
	help
	  This driver supports ISL6271A voltage regulator chip.

config REGULATOR_88PM8607
	bool "Marvell 88PM8607 Power regulators"
	depends on MFD_88PM860X=y
	help
	  This driver supports 88PM8607 voltage regulator chips.

config REGULATOR_MAX1586
	tristate "Maxim 1586/1587 voltage regulator"
	depends on I2C
	help
	  This driver controls a Maxim 1586 or 1587 voltage output
	  regulator via I2C bus. The provided regulator is suitable
	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.

config REGULATOR_MAX8649
	tristate "Maxim 8649 voltage regulator"
	depends on I2C
	select REGMAP_I2C
	help
	  This driver controls a Maxim 8649 voltage output regulator via
	  I2C bus.

config REGULATOR_MAX8660
	tristate "Maxim 8660/8661 voltage regulator"
	depends on I2C
	help
	  This driver controls a Maxim 8660/8661 voltage output
	  regulator via I2C bus.

config REGULATOR_MAX8907
	tristate "Maxim 8907 voltage regulator"
	depends on MFD_MAX8907
	help
	  This driver controls a Maxim 8907 voltage output regulator
	  via I2C bus. The provided regulator is suitable for Tegra
	  chip to control Step-Down DC-DC and LDOs.

config REGULATOR_MAX8925
	tristate "Maxim MAX8925 Power Management IC"
	depends on MFD_MAX8925
	help
	  Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.

config REGULATOR_MAX8952
	tristate "Maxim MAX8952 Power Management IC"
	depends on I2C
	help
	  This driver controls a Maxim 8952 voltage output regulator
	  via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
	  modes ranging from 0.77V to 1.40V by 0.01V steps.

config REGULATOR_MAX8997
	tristate "Maxim 8997/8966 regulator"
	depends on MFD_MAX8997
	help
	  This driver controls a Maxim 8997/8966 regulator
	  via I2C bus. The provided regulator is suitable for S5PC110,
	  S5PV210, and Exynos-4 chips to control VCC_CORE and
	  VCC_USIM voltages.

config REGULATOR_MAX8998
	tristate "Maxim 8998 voltage regulator"
	depends on MFD_MAX8998
	help
	  This driver controls a Maxim 8998 voltage output regulator
	  via I2C bus. The provided regulator is suitable for S3C6410
	  and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.

config REGULATOR_MAX77686
	tristate "Maxim 77686 regulator"
	depends on MFD_MAX77686
	help
	  This driver controls a Maxim 77686 regulator
	  via I2C bus. The provided regulator is suitable for
	  Exynos-4 chips to control VARM and VINT voltages.

config REGULATOR_PCAP
	tristate "Motorola PCAP2 regulator driver"
	depends on EZX_PCAP
	help
	 This driver provides support for the voltage regulators of the
	 PCAP2 PMIC.

config REGULATOR_LP3971
	tristate "National Semiconductors LP3971 PMIC regulator driver"
	depends on I2C
	help
	 Say Y here to support the voltage regulators and convertors
	 on National Semiconductors LP3971 PMIC

config REGULATOR_LP3972
	tristate "National Semiconductors LP3972 PMIC regulator driver"
	depends on I2C
	help
	 Say Y here to support the voltage regulators and convertors
	 on National Semiconductors LP3972 PMIC

config REGULATOR_LP872X
	bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
	depends on I2C=y
	select REGMAP_I2C
	help
	  This driver supports LP8720/LP8725 PMIC

config REGULATOR_LP8788
	bool "TI LP8788 Power Regulators"
	depends on MFD_LP8788
	help
	  This driver supports LP8788 voltage regulator chip.

config REGULATOR_PCF50633
	tristate "NXP PCF50633 regulator driver"
	depends on MFD_PCF50633
	help
	 Say Y here to support the voltage regulators and convertors
	 on PCF50633

config REGULATOR_RC5T583
	tristate "RICOH RC5T583 Power regulators"
	depends on MFD_RC5T583
	help
	  Select this option to enable the power regulator of RICOH
	  PMIC RC5T583.
	  This driver supports the control of different power rails of device
	  through regulator interface. The device supports multiple DCDC/LDO
	  outputs which can be controlled by i2c communication.

config REGULATOR_S2MPS11
	tristate "Samsung S2MPS11 voltage regulator"
	depends on MFD_SEC_CORE
	help
	 This driver supports a Samsung S2MPS11 voltage output regulator
	 via I2C bus. S2MPS11 is comprised of high efficient Buck converters
	 including Dual-Phase Buck converter, Buck-Boost converter, various LDOs.

config REGULATOR_S5M8767
	tristate "Samsung S5M8767A voltage regulator"
	depends on MFD_SEC_CORE
	help
	 This driver supports a Samsung S5M8767A voltage output regulator
	 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
	 supports DVS mode with 8bits of output voltage control.

config REGULATOR_AB3100
	tristate "ST-Ericsson AB3100 Regulator functions"
	depends on AB3100_CORE
	default y if AB3100_CORE
	help
	 These regulators correspond to functionality in the
	 AB3100 analog baseband dealing with power regulators
	 for the system.

config REGULATOR_AB8500
	bool "ST-Ericsson AB8500 Power Regulators"
	depends on AB8500_CORE
	help
	  This driver supports the regulators found on the ST-Ericsson mixed
	  signal AB8500 PMIC

config REGULATOR_DBX500_PRCMU
	bool

config REGULATOR_DB8500_PRCMU
	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
	depends on MFD_DB8500_PRCMU
	select REGULATOR_DBX500_PRCMU
	help
	  This driver supports the voltage domain regulators controlled by the
	  DB8500 PRCMU

config REGULATOR_PALMAS
	tristate "TI Palmas PMIC Regulators"
	depends on MFD_PALMAS
	help
	  If you wish to control the regulators on the Palmas series of
	  chips say Y here. This will enable support for all the software
	  controllable SMPS/LDO regulators.

	  The regulators available on Palmas series chips vary depending
	  on the muxing. This is handled automatically in the driver by
	  reading the mux info from OTP.

config REGULATOR_TPS6105X
	tristate "TI TPS6105X Power regulators"
	depends on TPS6105X
	default y if TPS6105X
	help
	  This driver supports TPS61050/TPS61052 voltage regulator chips.
	  It is a single boost converter primarily for white LEDs and
	  audio amplifiers.

config REGULATOR_TPS62360
	tristate "TI TPS6236x Power Regulator"
	depends on I2C
	select REGMAP_I2C
	help
	  This driver supports TPS6236x voltage regulator chip. This
	  regulator is meant for processor core supply. This chip is
	  high-frequency synchronous step down dc-dc converter optimized
	  for battery-powered portable applications.

config REGULATOR_TPS65023
	tristate "TI TPS65023 Power regulators"
	depends on I2C
	select REGMAP_I2C
	help
	  This driver supports TPS65023 voltage regulator chips. TPS65023 provides
	  three step-down converters and two general-purpose LDO voltage regulators.
	  It supports TI's software based Class-2 SmartReflex implementation.

config REGULATOR_TPS6507X
	tristate "TI TPS6507X Power regulators"
	depends on I2C
	help
	  This driver supports TPS6507X voltage regulator chips. TPS6507X provides
	  three step-down converters and two general-purpose LDO voltage regulators.
	  It supports TI's software based Class-2 SmartReflex implementation.

config REGULATOR_TPS65090
	tristate "TI TPS65090 Power regulator"
	depends on MFD_TPS65090
	help
	  This driver provides support for the voltage regulators on the
	  TI TPS65090 PMIC.

config REGULATOR_TPS65217
	tristate "TI TPS65217 Power regulators"
	depends on MFD_TPS65217
	help
	  This driver supports TPS65217 voltage regulator chips. TPS65217
	  provides three step-down converters and four general-purpose LDO
	  voltage regulators. It supports software based voltage control
	  for different voltage domains

config REGULATOR_TPS6524X
	tristate "TI TPS6524X Power regulators"
	depends on SPI
	help
	  This driver supports TPS6524X voltage regulator chips. TPS6524X
	  provides three step-down converters and two general-purpose LDO
	  voltage regulators.  This device is interfaced using a customized
	  serial interface currently supported on the sequencer serial
	  port controller.

config REGULATOR_TPS6586X
	tristate "TI TPS6586X Power regulators"
	depends on MFD_TPS6586X
	help
	  This driver supports TPS6586X voltage regulator chips.

config REGULATOR_TPS65910
	tristate "TI TPS65910/TPS65911 Power Regulators"
	depends on MFD_TPS65910
	help
	  This driver supports TPS65910/TPS65911 voltage regulator chips.

config REGULATOR_TPS65912
	tristate "TI TPS65912 Power regulator"
	depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
	help
	    This driver supports TPS65912 voltage regulator chip.

config REGULATOR_TWL4030
	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
	depends on TWL4030_CORE
	help
	  This driver supports the voltage regulators provided by
	  this family of companion chips.

config REGULATOR_WM831X
	tristate "Wolfson Microelectronics WM831x PMIC regulators"
	depends on MFD_WM831X
	help
	  Support the voltage and current regulators of the WM831x series
	  of PMIC devices.

config REGULATOR_WM8350
	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
	depends on MFD_WM8350
	help
	  This driver provides support for the voltage and current regulators
	  of the WM8350 AudioPlus PMIC.

config REGULATOR_WM8400
	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
	depends on MFD_WM8400
	help
	  This driver provides support for the voltage regulators of the
	  WM8400 AudioPlus PMIC.

config REGULATOR_WM8994
	tristate "Wolfson Microelectronics WM8994 CODEC"
	depends on MFD_WM8994
	help
	  This driver provides support for the voltage regulators on the
	  WM8994 CODEC.

endif
Commit	Line	Data
bbda14df	1	menuconfig REGULATOR
ba7e4763	2	bool "Voltage and Current Regulator Support"
ba7e4763 LG	3	help
	4	Generic Voltage and Current Regulator support.
	5
	6	This framework is designed to provide a generic interface to voltage
	7	and current regulators within the Linux kernel. It's intended to
	8	provide voltage and current control to client or consumer drivers and
	9	also provide status information to user space applications through a
	10	sysfs interface.
	11
	12	The intention is to allow systems to dynamically control regulator
	13	output in order to save power and prolong battery life. This applies
	14	to both voltage regulators (where voltage output is controllable) and
	15	current sinks (where current output is controllable).
	16
	17	This framework safely compiles out if not selected so that client
	18	drivers can still be used in systems with no software controllable
	19	regulators.
	20
	21	If unsure, say no.
	22
809d310c	23
bbda14df TI	24	if REGULATOR
bbda14df TI	25
ba7e4763 LG	26	config REGULATOR_DEBUG
ba7e4763 LG	27	bool "Regulator debug support"
ba7e4763 LG	28	help
	29	Say yes here to enable debugging support.
	30
34abbd68 MB	31	config REGULATOR_DUMMY
	32	bool "Provide a dummy regulator if regulator lookups fail"
	33	help
	34	If this option is enabled then when a regulator lookup fails
	35	and the board has not specified that it has provided full
4f842f6b MB	36	constraints the regulator core will provide an always
4f842f6b MB	37	enabled dummy regulator, allowing consumer drivers to continue.
34abbd68 MB	38
	39	A warning will be generated when this substitution is done.
	40
ba7e4763	41	config REGULATOR_FIXED_VOLTAGE
a9cb63b2	42	tristate "Fixed voltage regulator support"
a9cb63b2 MB	43	help
	44	This driver provides support for fixed voltage regulators,
	45	useful for systems which use a combination of software
	46	managed regulators and simple non-configurable regulators.
ba7e4763 LG	47
	48	config REGULATOR_VIRTUAL_CONSUMER
	49	tristate "Virtual regulator consumer support"
ba7e4763 LG	50	help
ba7e4763 LG	51	This driver provides a virtual consumer for the voltage and
c6d678b6 MJ	52	current regulator API which provides sysfs controls for
	53	configuring the supplies requested. This is mainly useful
	54	for test purposes.
ba7e4763	55
c6d678b6	56	If unsure, say no.
ba7e4763	57
1d98cccf MR	58	config REGULATOR_USERSPACE_CONSUMER
1d98cccf MR	59	tristate "Userspace regulator consumer support"
1d98cccf MR	60	help
1d98cccf MR	61	There are some classes of devices that are controlled entirely
6f2653e6	62	from user space. Userspace consumer driver provides ability to
1d98cccf MR	63	control power supplies for such devices.
1d98cccf MR	64
c6d678b6	65	If unsure, say no.
1d98cccf	66
3f0292ae HS	67	config REGULATOR_GPIO
3f0292ae HS	68	tristate "GPIO regulator support"
d162b3c5	69	depends on GENERIC_GPIO
3f0292ae HS	70	help
	71	This driver provides support for regulators that can be
	72	controlled via gpios.
	73	It is capable of supporting current and voltage regulators
	74	and the platform has to provide a mapping of GPIO-states
	75	to target volts/amps.
	76
dfb9b8a4 AL	77	config REGULATOR_AD5398
	78	tristate "Analog Devices AD5398/AD5821 regulators"
	79	depends on I2C
0eb5d5ab	80	help
dfb9b8a4 AL	81	This driver supports AD5398 and AD5821 current regulator chips.
	82	If building into module, its name is ad5398.ko.
	83
	84	config REGULATOR_AAT2870
	85	tristate "AnalogicTech AAT2870 Regulators"
	86	depends on MFD_AAT2870_CORE
	87	help
	88	If you have a AnalogicTech AAT2870 say Y to enable the
	89	regulator driver.
	90
b667a45d MB	91	config REGULATOR_ARIZONA
	92	tristate "Wolfson Arizona class devices"
	93	depends on MFD_ARIZONA
	94	help
	95	Support for the regulators found on Wolfson Arizona class
	96	devices.
	97
dfb9b8a4 AL	98	config REGULATOR_DA903X
	99	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
	100	depends on PMIC_DA903X
	101	help
	102	Say y here to support the BUCKs and LDOs regulators found on
	103	Dialog Semiconductor DA9030/DA9034 PMIC.
	104
	105	config REGULATOR_DA9052
	106	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
	107	depends on PMIC_DA9052
	108	help
	109	This driver supports the voltage regulators of DA9052-BC and
	110	DA9053-AA/Bx PMIC.
	111
49d8c599 YZ	112	config REGULATOR_FAN53555
	113	tristate "Fairchild FAN53555 Regulator"
	114	depends on I2C
	115	select REGMAP_I2C
	116	help
	117	This driver supports Fairchild FAN53555 Digitally Programmable
	118	TinyBuck Regulator. The FAN53555 is a step-down switching voltage
	119	regulator that delivers a digitally programmable output from an
	120	input voltage supply of 2.5V to 5.5V. The output voltage is
	121	programmed through an I2C interface.
	122
e3e5aff7 YCLP	123	config REGULATOR_ANATOP
e3e5aff7 YCLP	124	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
baa64151	125	depends on MFD_SYSCON
e3e5aff7 YCLP	126	help
	127	Say y here to support Freescale i.MX on-chip ANATOP LDOs
	128	regulators. It is recommended that this option be
	129	enabled on i.MX6 platform.
	130
dfb9b8a4 AL	131	config REGULATOR_MC13XXX_CORE
	132	tristate
	133
	134	config REGULATOR_MC13783
	135	tristate "Freescale MC13783 regulator driver"
	136	depends on MFD_MC13783
	137	select REGULATOR_MC13XXX_CORE
	138	help
	139	Say y here to support the regulators found on the Freescale MC13783
	140	PMIC.
	141
	142	config REGULATOR_MC13892
	143	tristate "Freescale MC13892 regulator driver"
	144	depends on MFD_MC13XXX
	145	select REGULATOR_MC13XXX_CORE
	146	help
	147	Say y here to support the regulators found on the Freescale MC13892
	148	PMIC.
	149
	150	config REGULATOR_ISL6271A
	151	tristate "Intersil ISL6271A Power regulator"
	152	depends on I2C
	153	help
	154	This driver supports ISL6271A voltage regulator chip.
	155
	156	config REGULATOR_88PM8607
	157	bool "Marvell 88PM8607 Power regulators"
	158	depends on MFD_88PM860X=y
	159	help
	160	This driver supports 88PM8607 voltage regulator chips.
0eb5d5ab	161
55f4fa4e RJ	162	config REGULATOR_MAX1586
	163	tristate "Maxim 1586/1587 voltage regulator"
	164	depends on I2C
55f4fa4e RJ	165	help
	166	This driver controls a Maxim 1586 or 1587 voltage output
	167	regulator via I2C bus. The provided regulator is suitable
	168	for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
	169
a71b797f HZ	170	config REGULATOR_MAX8649
	171	tristate "Maxim 8649 voltage regulator"
	172	depends on I2C
c5b68d47	173	select REGMAP_I2C
a71b797f HZ	174	help
	175	This driver controls a Maxim 8649 voltage output regulator via
	176	I2C bus.
	177
27f37e4b WS	178	config REGULATOR_MAX8660
	179	tristate "Maxim 8660/8661 voltage regulator"
	180	depends on I2C
	181	help
	182	This driver controls a Maxim 8660/8661 voltage output
	183	regulator via I2C bus.
	184
ffee1909 GY	185	config REGULATOR_MAX8907
	186	tristate "Maxim 8907 voltage regulator"
	187	depends on MFD_MAX8907
	188	help
	189	This driver controls a Maxim 8907 voltage output regulator
	190	via I2C bus. The provided regulator is suitable for Tegra
	191	chip to control Step-Down DC-DC and LDOs.
	192
08ff6f2a HZ	193	config REGULATOR_MAX8925
	194	tristate "Maxim MAX8925 Power Management IC"
	195	depends on MFD_MAX8925
	196	help
	197	Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
	198
202f4f53 MH	199	config REGULATOR_MAX8952
	200	tristate "Maxim MAX8952 Power Management IC"
	201	depends on I2C
	202	help
	203	This driver controls a Maxim 8952 voltage output regulator
	204	via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
	205	modes ranging from 0.77V to 1.40V by 0.01V steps.
	206
bd6ca2cf MH	207	config REGULATOR_MAX8997
	208	tristate "Maxim 8997/8966 regulator"
	209	depends on MFD_MAX8997
	210	help
	211	This driver controls a Maxim 8997/8966 regulator
	212	via I2C bus. The provided regulator is suitable for S5PC110,
	213	S5PV210, and Exynos-4 chips to control VCC_CORE and
	214	VCC_USIM voltages.
	215
156f2528 KP	216	config REGULATOR_MAX8998
156f2528 KP	217	tristate "Maxim 8998 voltage regulator"
69f71008	218	depends on MFD_MAX8998
156f2528 KP	219	help
	220	This driver controls a Maxim 8998 voltage output regulator
	221	via I2C bus. The provided regulator is suitable for S3C6410
	222	and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
	223
133d4016 JL	224	config REGULATOR_MAX77686
	225	tristate "Maxim 77686 regulator"
	226	depends on MFD_MAX77686
	227	help
	228	This driver controls a Maxim 77686 regulator
	229	via I2C bus. The provided regulator is suitable for
	230	Exynos-4 chips to control VARM and VINT voltages.
	231
dfb9b8a4 AL	232	config REGULATOR_PCAP
	233	tristate "Motorola PCAP2 regulator driver"
	234	depends on EZX_PCAP
5ec271e7	235	help
dfb9b8a4 AL	236	This driver provides support for the voltage regulators of the
dfb9b8a4 AL	237	PCAP2 PMIC.
5ec271e7	238
0cbdf7bc MS	239	config REGULATOR_LP3971
	240	tristate "National Semiconductors LP3971 PMIC regulator driver"
	241	depends on I2C
	242	help
	243	Say Y here to support the voltage regulators and convertors
	244	on National Semiconductors LP3971 PMIC
	245
5976f095 AL	246	config REGULATOR_LP3972
	247	tristate "National Semiconductors LP3972 PMIC regulator driver"
	248	depends on I2C
	249	help
	250	Say Y here to support the voltage regulators and convertors
	251	on National Semiconductors LP3972 PMIC
	252
af8b5fc3	253	config REGULATOR_LP872X
809d310c	254	bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
dc2060cf	255	depends on I2C=y
af8b5fc3 KM	256	select REGMAP_I2C
	257	help
	258	This driver supports LP8720/LP8725 PMIC
	259
ade7515f KM	260	config REGULATOR_LP8788
	261	bool "TI LP8788 Power Regulators"
	262	depends on MFD_LP8788
	263	help
	264	This driver supports LP8788 voltage regulator chip.
	265
dfb9b8a4 AL	266	config REGULATOR_PCF50633
dfb9b8a4 AL	267	tristate "NXP PCF50633 regulator driver"
c6d678b6	268	depends on MFD_PCF50633
295c08bc	269	help
dfb9b8a4 AL	270	Say Y here to support the voltage regulators and convertors
dfb9b8a4 AL	271	on PCF50633
295c08bc	272
6ffc3270 LD	273	config REGULATOR_RC5T583
	274	tristate "RICOH RC5T583 Power regulators"
	275	depends on MFD_RC5T583
	276	help
	277	Select this option to enable the power regulator of RICOH
	278	PMIC RC5T583.
	279	This driver supports the control of different power rails of device
	280	through regulator interface. The device supports multiple DCDC/LDO
	281	outputs which can be controlled by i2c communication.
	282
cb74685e SK	283	config REGULATOR_S2MPS11
	284	tristate "Samsung S2MPS11 voltage regulator"
	285	depends on MFD_SEC_CORE
	286	help
	287	This driver supports a Samsung S2MPS11 voltage output regulator
	288	via I2C bus. S2MPS11 is comprised of high efficient Buck converters
	289	including Dual-Phase Buck converter, Buck-Boost converter, various LDOs.
	290
dfb9b8a4 AL	291	config REGULATOR_S5M8767
dfb9b8a4 AL	292	tristate "Samsung S5M8767A voltage regulator"
66c9fbb9	293	depends on MFD_SEC_CORE
5e428d5c	294	help
dfb9b8a4 AL	295	This driver supports a Samsung S5M8767A voltage output regulator
	296	via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
	297	supports DVS mode with 8bits of output voltage control.
5e428d5c	298
d619bc14 LW	299	config REGULATOR_AB3100
	300	tristate "ST-Ericsson AB3100 Regulator functions"
	301	depends on AB3100_CORE
	302	default y if AB3100_CORE
	303	help
	304	These regulators correspond to functionality in the
	305	AB3100 analog baseband dealing with power regulators
	306	for the system.
	307
dfb9b8a4 AL	308	config REGULATOR_AB8500
	309	bool "ST-Ericsson AB8500 Power Regulators"
	310	depends on AB8500_CORE
	311	help
	312	This driver supports the regulators found on the ST-Ericsson mixed
	313	signal AB8500 PMIC
	314
	315	config REGULATOR_DBX500_PRCMU
	316	bool
	317
	318	config REGULATOR_DB8500_PRCMU
	319	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
	320	depends on MFD_DB8500_PRCMU
	321	select REGULATOR_DBX500_PRCMU
	322	help
	323	This driver supports the voltage domain regulators controlled by the
	324	DB8500 PRCMU
	325
4c5dabce GG	326	config REGULATOR_PALMAS
	327	tristate "TI Palmas PMIC Regulators"
	328	depends on MFD_PALMAS
	329	help
	330	If you wish to control the regulators on the Palmas series of
	331	chips say Y here. This will enable support for all the software
	332	controllable SMPS/LDO regulators.
	333
	334	The regulators available on Palmas series chips vary depending
	335	on the muxing. This is handled automatically in the driver by
	336	reading the mux info from OTP.
	337
2edd3b69 LW	338	config REGULATOR_TPS6105X
	339	tristate "TI TPS6105X Power regulators"
	340	depends on TPS6105X
	341	default y if TPS6105X
	342	help
	343	This driver supports TPS61050/TPS61052 voltage regulator chips.
	344	It is a single boost converter primarily for white LEDs and
	345	audio amplifiers.
	346
dfb9b8a4	347	config REGULATOR_TPS62360
d1cf4f65	348	tristate "TI TPS6236x Power Regulator"
dfb9b8a4 AL	349	depends on I2C
	350	select REGMAP_I2C
	351	help
d1cf4f65	352	This driver supports TPS6236x voltage regulator chip. This
dfb9b8a4 AL	353	regulator is meant for processor core supply. This chip is
	354	high-frequency synchronous step down dc-dc converter optimized
	355	for battery-powered portable applications.
	356
2de79850 AA	357	config REGULATOR_TPS65023
	358	tristate "TI TPS65023 Power regulators"
	359	depends on I2C
90923351	360	select REGMAP_I2C
2de79850 AA	361	help
	362	This driver supports TPS65023 voltage regulator chips. TPS65023 provides
	363	three step-down converters and two general-purpose LDO voltage regulators.
	364	It supports TI's software based Class-2 SmartReflex implementation.
	365
	366	config REGULATOR_TPS6507X
	367	tristate "TI TPS6507X Power regulators"
	368	depends on I2C
	369	help
	370	This driver supports TPS6507X voltage regulator chips. TPS6507X provides
	371	three step-down converters and two general-purpose LDO voltage regulators.
	372	It supports TI's software based Class-2 SmartReflex implementation.
	373
452534e5 VB	374	config REGULATOR_TPS65090
	375	tristate "TI TPS65090 Power regulator"
	376	depends on MFD_TPS65090
	377	help
	378	This driver provides support for the voltage regulators on the
	379	TI TPS65090 PMIC.
	380
a493077f AC	381	config REGULATOR_TPS65217
	382	tristate "TI TPS65217 Power regulators"
	383	depends on MFD_TPS65217
9260ad98	384	help
a493077f AC	385	This driver supports TPS65217 voltage regulator chips. TPS65217
	386	provides three step-down converters and four general-purpose LDO
	387	voltage regulators. It supports software based voltage control
	388	for different voltage domains
9260ad98	389
1394fd28 CC	390	config REGULATOR_TPS6524X
	391	tristate "TI TPS6524X Power regulators"
	392	depends on SPI
be0e2d3e	393	help
1394fd28 CC	394	This driver supports TPS6524X voltage regulator chips. TPS6524X
	395	provides three step-down converters and two general-purpose LDO
	396	voltage regulators. This device is interfaced using a customized
	397	serial interface currently supported on the sequencer serial
	398	port controller.
be0e2d3e	399
dfb9b8a4 AL	400	config REGULATOR_TPS6586X
	401	tristate "TI TPS6586X Power regulators"
	402	depends on MFD_TPS6586X
51bd6943	403	help
dfb9b8a4	404	This driver supports TPS6586X voltage regulator chips.
51bd6943	405
518fb721	406	config REGULATOR_TPS65910
ae0e6544	407	tristate "TI TPS65910/TPS65911 Power Regulators"
518fb721	408	depends on MFD_TPS65910
8b385d9b	409	help
ae0e6544	410	This driver supports TPS65910/TPS65911 voltage regulator chips.
c789ca20	411
dfb9b8a4 AL	412	config REGULATOR_TPS65912
	413	tristate "TI TPS65912 Power regulator"
	414	depends on (MFD_TPS65912_I2C \|\| MFD_TPS65912_SPI)
c789ca20	415	help
dfb9b8a4	416	This driver supports TPS65912 voltage regulator chip.
c789ca20	417
dfb9b8a4 AL	418	config REGULATOR_TWL4030
	419	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
	420	depends on TWL4030_CORE
1032fbfd	421	help
dfb9b8a4 AL	422	This driver supports the voltage regulators provided by
dfb9b8a4 AL	423	this family of companion chips.
1032fbfd	424
dfb9b8a4 AL	425	config REGULATOR_WM831X
	426	tristate "Wolfson Microelectronics WM831x PMIC regulators"
	427	depends on MFD_WM831X
49610235	428	help
dfb9b8a4 AL	429	Support the voltage and current regulators of the WM831x series
dfb9b8a4 AL	430	of PMIC devices.
49610235	431
dfb9b8a4 AL	432	config REGULATOR_WM8350
	433	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
	434	depends on MFD_WM8350
1394fd28	435	help
dfb9b8a4	436	This driver provides support for the voltage and current regulators
c6d678b6	437	of the WM8350 AudioPlus PMIC.
1394fd28	438
dfb9b8a4 AL	439	config REGULATOR_WM8400
	440	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
	441	depends on MFD_WM8400
518fb721	442	help
dfb9b8a4 AL	443	This driver provides support for the voltage regulators of the
dfb9b8a4 AL	444	WM8400 AudioPlus PMIC.
518fb721	445
dfb9b8a4 AL	446	config REGULATOR_WM8994
	447	tristate "Wolfson Microelectronics WM8994 CODEC"
	448	depends on MFD_WM8994
f7eb6c5e	449	help
dfb9b8a4 AL	450	This driver provides support for the voltage regulators on the
dfb9b8a4 AL	451	WM8994 CODEC.
f7eb6c5e	452
bbda14df	453	endif
295c08bc	454