]>
Commit | Line | Data |
---|---|---|
130a990b | 1 | // SPDX-License-Identifier: GPL-2.0 |
ff718800 KP |
2 | /* |
3 | * Copyright (C) 2003-2015 Broadcom Corporation | |
4 | * All Rights Reserved | |
ff718800 KP |
5 | */ |
6 | ||
121111d7 | 7 | #include <linux/gpio/driver.h> |
ff718800 KP |
8 | #include <linux/platform_device.h> |
9 | #include <linux/of_device.h> | |
10 | #include <linux/module.h> | |
11 | #include <linux/irq.h> | |
12 | #include <linux/interrupt.h> | |
83ea24fd | 13 | #include <linux/irqchip/chained_irq.h> |
baa1b920 | 14 | #include <linux/acpi.h> |
ff718800 KP |
15 | |
16 | /* | |
17 | * XLP GPIO has multiple 32 bit registers for each feature where each register | |
18 | * controls 32 pins. So, pins up to 64 require 2 32-bit registers and up to 96 | |
19 | * require 3 32-bit registers for each feature. | |
20 | * Here we only define offset of the first register for each feature. Offset of | |
21 | * the registers for pins greater than 32 can be calculated as following(Use | |
22 | * GPIO_INT_STAT as example): | |
23 | * | |
24 | * offset = (gpio / XLP_GPIO_REGSZ) * 4; | |
25 | * reg_addr = addr + offset; | |
26 | * | |
27 | * where addr is base address of the that feature register and gpio is the pin. | |
28 | */ | |
29 | #define GPIO_OUTPUT_EN 0x00 | |
30 | #define GPIO_PADDRV 0x08 | |
31 | #define GPIO_INT_EN00 0x18 | |
32 | #define GPIO_INT_EN10 0x20 | |
33 | #define GPIO_INT_EN20 0x28 | |
34 | #define GPIO_INT_EN30 0x30 | |
35 | #define GPIO_INT_POL 0x38 | |
36 | #define GPIO_INT_TYPE 0x40 | |
37 | #define GPIO_INT_STAT 0x48 | |
38 | ||
39 | #define GPIO_9XX_BYTESWAP 0X00 | |
40 | #define GPIO_9XX_CTRL 0X04 | |
41 | #define GPIO_9XX_OUTPUT_EN 0x14 | |
42 | #define GPIO_9XX_PADDRV 0x24 | |
43 | /* | |
44 | * Only for 4 interrupt enable reg are defined for now, | |
45 | * total reg available are 12. | |
46 | */ | |
47 | #define GPIO_9XX_INT_EN00 0x44 | |
48 | #define GPIO_9XX_INT_EN10 0x54 | |
49 | #define GPIO_9XX_INT_EN20 0x64 | |
50 | #define GPIO_9XX_INT_EN30 0x74 | |
51 | #define GPIO_9XX_INT_POL 0x104 | |
52 | #define GPIO_9XX_INT_TYPE 0x114 | |
53 | #define GPIO_9XX_INT_STAT 0x124 | |
54 | ||
55 | #define GPIO_3XX_INT_EN00 0x18 | |
56 | #define GPIO_3XX_INT_EN10 0x20 | |
57 | #define GPIO_3XX_INT_EN20 0x28 | |
58 | #define GPIO_3XX_INT_EN30 0x30 | |
59 | #define GPIO_3XX_INT_POL 0x78 | |
60 | #define GPIO_3XX_INT_TYPE 0x80 | |
61 | #define GPIO_3XX_INT_STAT 0x88 | |
62 | ||
63 | /* Interrupt type register mask */ | |
64 | #define XLP_GPIO_IRQ_TYPE_LVL 0x0 | |
65 | #define XLP_GPIO_IRQ_TYPE_EDGE 0x1 | |
66 | ||
67 | /* Interrupt polarity register mask */ | |
68 | #define XLP_GPIO_IRQ_POL_HIGH 0x0 | |
69 | #define XLP_GPIO_IRQ_POL_LOW 0x1 | |
70 | ||
71 | #define XLP_GPIO_REGSZ 32 | |
72 | #define XLP_GPIO_IRQ_BASE 768 | |
73 | #define XLP_MAX_NR_GPIO 96 | |
74 | ||
75 | /* XLP variants supported by this driver */ | |
76 | enum { | |
77 | XLP_GPIO_VARIANT_XLP832 = 1, | |
78 | XLP_GPIO_VARIANT_XLP316, | |
79 | XLP_GPIO_VARIANT_XLP208, | |
80 | XLP_GPIO_VARIANT_XLP980, | |
dd98756d KP |
81 | XLP_GPIO_VARIANT_XLP532, |
82 | GPIO_VARIANT_VULCAN | |
ff718800 KP |
83 | }; |
84 | ||
85 | struct xlp_gpio_priv { | |
86 | struct gpio_chip chip; | |
87 | DECLARE_BITMAP(gpio_enabled_mask, XLP_MAX_NR_GPIO); | |
88 | void __iomem *gpio_intr_en; /* pointer to first intr enable reg */ | |
89 | void __iomem *gpio_intr_stat; /* pointer to first intr status reg */ | |
90 | void __iomem *gpio_intr_type; /* pointer to first intr type reg */ | |
91 | void __iomem *gpio_intr_pol; /* pointer to first intr polarity reg */ | |
92 | void __iomem *gpio_out_en; /* pointer to first output enable reg */ | |
93 | void __iomem *gpio_paddrv; /* pointer to first pad drive reg */ | |
94 | spinlock_t lock; | |
95 | }; | |
96 | ||
ff718800 KP |
97 | static int xlp_gpio_get_reg(void __iomem *addr, unsigned gpio) |
98 | { | |
99 | u32 pos, regset; | |
100 | ||
101 | pos = gpio % XLP_GPIO_REGSZ; | |
102 | regset = (gpio / XLP_GPIO_REGSZ) * 4; | |
103 | return !!(readl(addr + regset) & BIT(pos)); | |
104 | } | |
105 | ||
106 | static void xlp_gpio_set_reg(void __iomem *addr, unsigned gpio, int state) | |
107 | { | |
108 | u32 value, pos, regset; | |
109 | ||
110 | pos = gpio % XLP_GPIO_REGSZ; | |
111 | regset = (gpio / XLP_GPIO_REGSZ) * 4; | |
112 | value = readl(addr + regset); | |
113 | ||
114 | if (state) | |
115 | value |= BIT(pos); | |
116 | else | |
117 | value &= ~BIT(pos); | |
118 | ||
119 | writel(value, addr + regset); | |
120 | } | |
121 | ||
122 | static void xlp_gpio_irq_disable(struct irq_data *d) | |
123 | { | |
124 | struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
e730a595 | 125 | struct xlp_gpio_priv *priv = gpiochip_get_data(gc); |
ff718800 KP |
126 | unsigned long flags; |
127 | ||
128 | spin_lock_irqsave(&priv->lock, flags); | |
129 | xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0); | |
130 | __clear_bit(d->hwirq, priv->gpio_enabled_mask); | |
131 | spin_unlock_irqrestore(&priv->lock, flags); | |
132 | } | |
133 | ||
134 | static void xlp_gpio_irq_mask_ack(struct irq_data *d) | |
135 | { | |
136 | struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
e730a595 | 137 | struct xlp_gpio_priv *priv = gpiochip_get_data(gc); |
ff718800 KP |
138 | unsigned long flags; |
139 | ||
140 | spin_lock_irqsave(&priv->lock, flags); | |
141 | xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0); | |
142 | xlp_gpio_set_reg(priv->gpio_intr_stat, d->hwirq, 0x1); | |
143 | __clear_bit(d->hwirq, priv->gpio_enabled_mask); | |
144 | spin_unlock_irqrestore(&priv->lock, flags); | |
145 | } | |
146 | ||
147 | static void xlp_gpio_irq_unmask(struct irq_data *d) | |
148 | { | |
149 | struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
e730a595 | 150 | struct xlp_gpio_priv *priv = gpiochip_get_data(gc); |
ff718800 KP |
151 | unsigned long flags; |
152 | ||
153 | spin_lock_irqsave(&priv->lock, flags); | |
154 | xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x1); | |
155 | __set_bit(d->hwirq, priv->gpio_enabled_mask); | |
156 | spin_unlock_irqrestore(&priv->lock, flags); | |
157 | } | |
158 | ||
159 | static int xlp_gpio_set_irq_type(struct irq_data *d, unsigned int type) | |
160 | { | |
161 | struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
e730a595 | 162 | struct xlp_gpio_priv *priv = gpiochip_get_data(gc); |
ff718800 KP |
163 | int pol, irq_type; |
164 | ||
165 | switch (type) { | |
166 | case IRQ_TYPE_EDGE_RISING: | |
167 | irq_type = XLP_GPIO_IRQ_TYPE_EDGE; | |
168 | pol = XLP_GPIO_IRQ_POL_HIGH; | |
169 | break; | |
170 | case IRQ_TYPE_EDGE_FALLING: | |
171 | irq_type = XLP_GPIO_IRQ_TYPE_EDGE; | |
172 | pol = XLP_GPIO_IRQ_POL_LOW; | |
173 | break; | |
174 | case IRQ_TYPE_LEVEL_HIGH: | |
175 | irq_type = XLP_GPIO_IRQ_TYPE_LVL; | |
176 | pol = XLP_GPIO_IRQ_POL_HIGH; | |
177 | break; | |
178 | case IRQ_TYPE_LEVEL_LOW: | |
179 | irq_type = XLP_GPIO_IRQ_TYPE_LVL; | |
180 | pol = XLP_GPIO_IRQ_POL_LOW; | |
181 | break; | |
182 | default: | |
183 | return -EINVAL; | |
184 | } | |
185 | ||
186 | xlp_gpio_set_reg(priv->gpio_intr_type, d->hwirq, irq_type); | |
187 | xlp_gpio_set_reg(priv->gpio_intr_pol, d->hwirq, pol); | |
188 | ||
189 | return 0; | |
190 | } | |
191 | ||
192 | static struct irq_chip xlp_gpio_irq_chip = { | |
193 | .name = "XLP-GPIO", | |
194 | .irq_mask_ack = xlp_gpio_irq_mask_ack, | |
195 | .irq_disable = xlp_gpio_irq_disable, | |
196 | .irq_set_type = xlp_gpio_set_irq_type, | |
197 | .irq_unmask = xlp_gpio_irq_unmask, | |
198 | .flags = IRQCHIP_ONESHOT_SAFE, | |
199 | }; | |
200 | ||
83ea24fd | 201 | static void xlp_gpio_generic_handler(struct irq_desc *desc) |
ff718800 | 202 | { |
83ea24fd KP |
203 | struct xlp_gpio_priv *priv = irq_desc_get_handler_data(desc); |
204 | struct irq_chip *irqchip = irq_desc_get_chip(desc); | |
ff718800 KP |
205 | int gpio, regoff; |
206 | u32 gpio_stat; | |
207 | ||
208 | regoff = -1; | |
209 | gpio_stat = 0; | |
83ea24fd KP |
210 | |
211 | chained_irq_enter(irqchip, desc); | |
ff718800 KP |
212 | for_each_set_bit(gpio, priv->gpio_enabled_mask, XLP_MAX_NR_GPIO) { |
213 | if (regoff != gpio / XLP_GPIO_REGSZ) { | |
214 | regoff = gpio / XLP_GPIO_REGSZ; | |
215 | gpio_stat = readl(priv->gpio_intr_stat + regoff * 4); | |
216 | } | |
83ea24fd | 217 | |
ff718800 KP |
218 | if (gpio_stat & BIT(gpio % XLP_GPIO_REGSZ)) |
219 | generic_handle_irq(irq_find_mapping( | |
f0fbe7bc | 220 | priv->chip.irq.domain, gpio)); |
ff718800 | 221 | } |
83ea24fd | 222 | chained_irq_exit(irqchip, desc); |
ff718800 KP |
223 | } |
224 | ||
225 | static int xlp_gpio_dir_output(struct gpio_chip *gc, unsigned gpio, int state) | |
226 | { | |
e730a595 | 227 | struct xlp_gpio_priv *priv = gpiochip_get_data(gc); |
ff718800 KP |
228 | |
229 | BUG_ON(gpio >= gc->ngpio); | |
230 | xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x1); | |
231 | ||
232 | return 0; | |
233 | } | |
234 | ||
235 | static int xlp_gpio_dir_input(struct gpio_chip *gc, unsigned gpio) | |
236 | { | |
e730a595 | 237 | struct xlp_gpio_priv *priv = gpiochip_get_data(gc); |
ff718800 KP |
238 | |
239 | BUG_ON(gpio >= gc->ngpio); | |
240 | xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x0); | |
241 | ||
242 | return 0; | |
243 | } | |
244 | ||
245 | static int xlp_gpio_get(struct gpio_chip *gc, unsigned gpio) | |
246 | { | |
e730a595 | 247 | struct xlp_gpio_priv *priv = gpiochip_get_data(gc); |
ff718800 KP |
248 | |
249 | BUG_ON(gpio >= gc->ngpio); | |
250 | return xlp_gpio_get_reg(priv->gpio_paddrv, gpio); | |
251 | } | |
252 | ||
253 | static void xlp_gpio_set(struct gpio_chip *gc, unsigned gpio, int state) | |
254 | { | |
e730a595 | 255 | struct xlp_gpio_priv *priv = gpiochip_get_data(gc); |
ff718800 KP |
256 | |
257 | BUG_ON(gpio >= gc->ngpio); | |
258 | xlp_gpio_set_reg(priv->gpio_paddrv, gpio, state); | |
259 | } | |
260 | ||
261 | static const struct of_device_id xlp_gpio_of_ids[] = { | |
262 | { | |
263 | .compatible = "netlogic,xlp832-gpio", | |
264 | .data = (void *)XLP_GPIO_VARIANT_XLP832, | |
265 | }, | |
266 | { | |
267 | .compatible = "netlogic,xlp316-gpio", | |
268 | .data = (void *)XLP_GPIO_VARIANT_XLP316, | |
269 | }, | |
270 | { | |
271 | .compatible = "netlogic,xlp208-gpio", | |
272 | .data = (void *)XLP_GPIO_VARIANT_XLP208, | |
273 | }, | |
274 | { | |
275 | .compatible = "netlogic,xlp980-gpio", | |
276 | .data = (void *)XLP_GPIO_VARIANT_XLP980, | |
277 | }, | |
278 | { | |
279 | .compatible = "netlogic,xlp532-gpio", | |
280 | .data = (void *)XLP_GPIO_VARIANT_XLP532, | |
281 | }, | |
dd98756d KP |
282 | { |
283 | .compatible = "brcm,vulcan-gpio", | |
284 | .data = (void *)GPIO_VARIANT_VULCAN, | |
285 | }, | |
ff718800 KP |
286 | { /* sentinel */ }, |
287 | }; | |
288 | MODULE_DEVICE_TABLE(of, xlp_gpio_of_ids); | |
289 | ||
290 | static int xlp_gpio_probe(struct platform_device *pdev) | |
291 | { | |
292 | struct gpio_chip *gc; | |
293 | struct resource *iores; | |
294 | struct xlp_gpio_priv *priv; | |
ff718800 KP |
295 | void __iomem *gpio_base; |
296 | int irq_base, irq, err; | |
297 | int ngpio; | |
298 | u32 soc_type; | |
299 | ||
300 | iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
301 | if (!iores) | |
302 | return -ENODEV; | |
303 | ||
304 | priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); | |
305 | if (!priv) | |
306 | return -ENOMEM; | |
307 | ||
308 | gpio_base = devm_ioremap_resource(&pdev->dev, iores); | |
309 | if (IS_ERR(gpio_base)) | |
310 | return PTR_ERR(gpio_base); | |
311 | ||
312 | irq = platform_get_irq(pdev, 0); | |
313 | if (irq < 0) | |
314 | return irq; | |
315 | ||
baa1b920 | 316 | if (pdev->dev.of_node) { |
0c695e38 | 317 | soc_type = (uintptr_t)of_device_get_match_data(&pdev->dev); |
baa1b920 KP |
318 | } else { |
319 | const struct acpi_device_id *acpi_id; | |
320 | ||
321 | acpi_id = acpi_match_device(pdev->dev.driver->acpi_match_table, | |
322 | &pdev->dev); | |
323 | if (!acpi_id || !acpi_id->driver_data) { | |
324 | dev_err(&pdev->dev, "Unable to match ACPI ID\n"); | |
325 | return -ENODEV; | |
326 | } | |
327 | soc_type = (uintptr_t) acpi_id->driver_data; | |
328 | } | |
ff718800 KP |
329 | |
330 | switch (soc_type) { | |
331 | case XLP_GPIO_VARIANT_XLP832: | |
332 | priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN; | |
333 | priv->gpio_paddrv = gpio_base + GPIO_PADDRV; | |
334 | priv->gpio_intr_stat = gpio_base + GPIO_INT_STAT; | |
335 | priv->gpio_intr_type = gpio_base + GPIO_INT_TYPE; | |
336 | priv->gpio_intr_pol = gpio_base + GPIO_INT_POL; | |
337 | priv->gpio_intr_en = gpio_base + GPIO_INT_EN00; | |
338 | ngpio = 41; | |
339 | break; | |
340 | case XLP_GPIO_VARIANT_XLP208: | |
341 | case XLP_GPIO_VARIANT_XLP316: | |
342 | priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN; | |
343 | priv->gpio_paddrv = gpio_base + GPIO_PADDRV; | |
344 | priv->gpio_intr_stat = gpio_base + GPIO_3XX_INT_STAT; | |
345 | priv->gpio_intr_type = gpio_base + GPIO_3XX_INT_TYPE; | |
346 | priv->gpio_intr_pol = gpio_base + GPIO_3XX_INT_POL; | |
347 | priv->gpio_intr_en = gpio_base + GPIO_3XX_INT_EN00; | |
348 | ||
349 | ngpio = (soc_type == XLP_GPIO_VARIANT_XLP208) ? 42 : 57; | |
350 | break; | |
351 | case XLP_GPIO_VARIANT_XLP980: | |
352 | case XLP_GPIO_VARIANT_XLP532: | |
dd98756d | 353 | case GPIO_VARIANT_VULCAN: |
ff718800 KP |
354 | priv->gpio_out_en = gpio_base + GPIO_9XX_OUTPUT_EN; |
355 | priv->gpio_paddrv = gpio_base + GPIO_9XX_PADDRV; | |
356 | priv->gpio_intr_stat = gpio_base + GPIO_9XX_INT_STAT; | |
357 | priv->gpio_intr_type = gpio_base + GPIO_9XX_INT_TYPE; | |
358 | priv->gpio_intr_pol = gpio_base + GPIO_9XX_INT_POL; | |
359 | priv->gpio_intr_en = gpio_base + GPIO_9XX_INT_EN00; | |
360 | ||
dd98756d KP |
361 | if (soc_type == XLP_GPIO_VARIANT_XLP980) |
362 | ngpio = 66; | |
363 | else if (soc_type == XLP_GPIO_VARIANT_XLP532) | |
364 | ngpio = 67; | |
365 | else | |
366 | ngpio = 70; | |
ff718800 KP |
367 | break; |
368 | default: | |
369 | dev_err(&pdev->dev, "Unknown Processor type!\n"); | |
370 | return -ENODEV; | |
371 | } | |
372 | ||
373 | bitmap_zero(priv->gpio_enabled_mask, XLP_MAX_NR_GPIO); | |
374 | ||
375 | gc = &priv->chip; | |
376 | ||
b8a3f52e AL |
377 | gc->owner = THIS_MODULE; |
378 | gc->label = dev_name(&pdev->dev); | |
ff718800 | 379 | gc->base = 0; |
58383c78 | 380 | gc->parent = &pdev->dev; |
ff718800 KP |
381 | gc->ngpio = ngpio; |
382 | gc->of_node = pdev->dev.of_node; | |
383 | gc->direction_output = xlp_gpio_dir_output; | |
384 | gc->direction_input = xlp_gpio_dir_input; | |
385 | gc->set = xlp_gpio_set; | |
386 | gc->get = xlp_gpio_get; | |
387 | ||
388 | spin_lock_init(&priv->lock); | |
1630a062 KP |
389 | |
390 | /* XLP(MIPS) has fixed range for GPIO IRQs, Vulcan(ARM64) does not */ | |
391 | if (soc_type != GPIO_VARIANT_VULCAN) { | |
31bd86d9 BG |
392 | irq_base = devm_irq_alloc_descs(&pdev->dev, -1, |
393 | XLP_GPIO_IRQ_BASE, | |
394 | gc->ngpio, 0); | |
1630a062 KP |
395 | if (irq_base < 0) { |
396 | dev_err(&pdev->dev, "Failed to allocate IRQ numbers\n"); | |
397 | return irq_base; | |
398 | } | |
399 | } else { | |
400 | irq_base = 0; | |
ff718800 KP |
401 | } |
402 | ||
e730a595 | 403 | err = gpiochip_add_data(gc, priv); |
ff718800 | 404 | if (err < 0) |
31bd86d9 | 405 | return err; |
ff718800 KP |
406 | |
407 | err = gpiochip_irqchip_add(gc, &xlp_gpio_irq_chip, irq_base, | |
408 | handle_level_irq, IRQ_TYPE_NONE); | |
409 | if (err) { | |
410 | dev_err(&pdev->dev, "Could not connect irqchip to gpiochip!\n"); | |
411 | goto out_gpio_remove; | |
412 | } | |
413 | ||
83ea24fd KP |
414 | gpiochip_set_chained_irqchip(gc, &xlp_gpio_irq_chip, irq, |
415 | xlp_gpio_generic_handler); | |
416 | ||
ff718800 KP |
417 | dev_info(&pdev->dev, "registered %d GPIOs\n", gc->ngpio); |
418 | ||
419 | return 0; | |
420 | ||
421 | out_gpio_remove: | |
422 | gpiochip_remove(gc); | |
ff718800 KP |
423 | return err; |
424 | } | |
425 | ||
baa1b920 KP |
426 | #ifdef CONFIG_ACPI |
427 | static const struct acpi_device_id xlp_gpio_acpi_match[] = { | |
428 | { "BRCM9006", GPIO_VARIANT_VULCAN }, | |
529f75d8 | 429 | { "CAV9006", GPIO_VARIANT_VULCAN }, |
baa1b920 KP |
430 | {}, |
431 | }; | |
432 | MODULE_DEVICE_TABLE(acpi, xlp_gpio_acpi_match); | |
433 | #endif | |
434 | ||
ff718800 KP |
435 | static struct platform_driver xlp_gpio_driver = { |
436 | .driver = { | |
437 | .name = "xlp-gpio", | |
438 | .of_match_table = xlp_gpio_of_ids, | |
baa1b920 | 439 | .acpi_match_table = ACPI_PTR(xlp_gpio_acpi_match), |
ff718800 KP |
440 | }, |
441 | .probe = xlp_gpio_probe, | |
442 | }; | |
443 | module_platform_driver(xlp_gpio_driver); | |
444 | ||
445 | MODULE_AUTHOR("Kamlakant Patel <[email protected]>"); | |
446 | MODULE_AUTHOR("Ganesan Ramalingam <[email protected]>"); | |
447 | MODULE_DESCRIPTION("Netlogic XLP GPIO Driver"); | |
448 | MODULE_LICENSE("GPL v2"); |