[linux.git] / drivers / watchdog / octeon-wdt-main.c

/*
 * Octeon Watchdog driver
 *
 * Copyright (C) 2007, 2008, 2009, 2010 Cavium Networks
 *
 * Converted to use WATCHDOG_CORE by Aaro Koskinen <[email protected]>.
 *
 * Some parts derived from wdt.c
 *
 *	(c) Copyright 1996-1997 Alan Cox <[email protected]>,
 *						All Rights Reserved.
 *
 *	This program is free software; you can redistribute it and/or
 *	modify it under the terms of the GNU General Public License
 *	as published by the Free Software Foundation; either version
 *	2 of the License, or (at your option) any later version.
 *
 *	Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
 *	warranty for any of this software. This material is provided
 *	"AS-IS" and at no charge.
 *
 *	(c) Copyright 1995    Alan Cox <[email protected]>
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 *
 * The OCTEON watchdog has a maximum timeout of 2^32 * io_clock.
 * For most systems this is less than 10 seconds, so to allow for
 * software to request longer watchdog heartbeats, we maintain software
 * counters to count multiples of the base rate.  If the system locks
 * up in such a manner that we can not run the software counters, the
 * only result is a watchdog reset sooner than was requested.  But
 * that is OK, because in this case userspace would likely not be able
 * to do anything anyhow.
 *
 * The hardware watchdog interval we call the period.  The OCTEON
 * watchdog goes through several stages, after the first period an
 * irq is asserted, then if it is not reset, after the next period NMI
 * is asserted, then after an additional period a chip wide soft reset.
 * So for the software counters, we reset watchdog after each period
 * and decrement the counter.  But for the last two periods we need to
 * let the watchdog progress to the NMI stage so we disable the irq
 * and let it proceed.  Once in the NMI, we print the register state
 * to the serial port and then wait for the reset.
 *
 * A watchdog is maintained for each CPU in the system, that way if
 * one CPU suffers a lockup, we also get a register dump and reset.
 * The userspace ping resets the watchdog on all CPUs.
 *
 * Before userspace opens the watchdog device, we still run the
 * watchdogs to catch any lockups that may be kernel related.
 *
 */

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/miscdevice.h>
#include <linux/interrupt.h>
#include <linux/watchdog.h>
#include <linux/cpumask.h>
#include <linux/bitops.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/cpu.h>
#include <linux/smp.h>
#include <linux/fs.h>
#include <linux/irq.h>

#include <asm/mipsregs.h>
#include <asm/uasm.h>

#include <asm/octeon/octeon.h>

/* The count needed to achieve timeout_sec. */
static unsigned int timeout_cnt;

/* The maximum period supported. */
static unsigned int max_timeout_sec;

/* The current period.  */
static unsigned int timeout_sec;

/* Set to non-zero when userspace countdown mode active */
static int do_coundown;
static unsigned int countdown_reset;
static unsigned int per_cpu_countdown[NR_CPUS];

static cpumask_t irq_enabled_cpus;

#define WD_TIMO 60			/* Default heartbeat = 60 seconds */

static int heartbeat = WD_TIMO;
module_param(heartbeat, int, S_IRUGO);
MODULE_PARM_DESC(heartbeat,
	"Watchdog heartbeat in seconds. (0 < heartbeat, default="
				__MODULE_STRING(WD_TIMO) ")");

static bool nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, bool, S_IRUGO);
MODULE_PARM_DESC(nowayout,
	"Watchdog cannot be stopped once started (default="
				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");

static u32 nmi_stage1_insns[64] __initdata;
/* We need one branch and therefore one relocation per target label. */
static struct uasm_label labels[5] __initdata;
static struct uasm_reloc relocs[5] __initdata;

enum lable_id {
	label_enter_bootloader = 1
};

/* Some CP0 registers */
#define K0		26
#define C0_CVMMEMCTL 11, 7
#define C0_STATUS 12, 0
#define C0_EBASE 15, 1
#define C0_DESAVE 31, 0

void octeon_wdt_nmi_stage2(void);

static void __init octeon_wdt_build_stage1(void)
{
	int i;
	int len;
	u32 *p = nmi_stage1_insns;
#ifdef CONFIG_HOTPLUG_CPU
	struct uasm_label *l = labels;
	struct uasm_reloc *r = relocs;
#endif

	/*
	 * For the next few instructions running the debugger may
	 * cause corruption of k0 in the saved registers. Since we're
	 * about to crash, nobody probably cares.
	 *
	 * Save K0 into the debug scratch register
	 */
	uasm_i_dmtc0(&p, K0, C0_DESAVE);

	uasm_i_mfc0(&p, K0, C0_STATUS);
#ifdef CONFIG_HOTPLUG_CPU
	if (octeon_bootloader_entry_addr)
		uasm_il_bbit0(&p, &r, K0, ilog2(ST0_NMI),
			      label_enter_bootloader);
#endif
	/* Force 64-bit addressing enabled */
	uasm_i_ori(&p, K0, K0, ST0_UX | ST0_SX | ST0_KX);
	uasm_i_mtc0(&p, K0, C0_STATUS);

#ifdef CONFIG_HOTPLUG_CPU
	if (octeon_bootloader_entry_addr) {
		uasm_i_mfc0(&p, K0, C0_EBASE);
		/* Coreid number in K0 */
		uasm_i_andi(&p, K0, K0, 0xf);
		/* 8 * coreid in bits 16-31 */
		uasm_i_dsll_safe(&p, K0, K0, 3 + 16);
		uasm_i_ori(&p, K0, K0, 0x8001);
		uasm_i_dsll_safe(&p, K0, K0, 16);
		uasm_i_ori(&p, K0, K0, 0x0700);
		uasm_i_drotr_safe(&p, K0, K0, 32);
		/*
		 * Should result in: 0x8001,0700,0000,8*coreid which is
		 * CVMX_CIU_WDOGX(coreid) - 0x0500
		 *
		 * Now ld K0, CVMX_CIU_WDOGX(coreid)
		 */
		uasm_i_ld(&p, K0, 0x500, K0);
		/*
		 * If bit one set handle the NMI as a watchdog event.
		 * otherwise transfer control to bootloader.
		 */
		uasm_il_bbit0(&p, &r, K0, 1, label_enter_bootloader);
		uasm_i_nop(&p);
	}
#endif

	/* Clear Dcache so cvmseg works right. */
	uasm_i_cache(&p, 1, 0, 0);

	/* Use K0 to do a read/modify/write of CVMMEMCTL */
	uasm_i_dmfc0(&p, K0, C0_CVMMEMCTL);
	/* Clear out the size of CVMSEG	*/
	uasm_i_dins(&p, K0, 0, 0, 6);
	/* Set CVMSEG to its largest value */
	uasm_i_ori(&p, K0, K0, 0x1c0 | 54);
	/* Store the CVMMEMCTL value */
	uasm_i_dmtc0(&p, K0, C0_CVMMEMCTL);

	/* Load the address of the second stage handler */
	UASM_i_LA(&p, K0, (long)octeon_wdt_nmi_stage2);
	uasm_i_jr(&p, K0);
	uasm_i_dmfc0(&p, K0, C0_DESAVE);

#ifdef CONFIG_HOTPLUG_CPU
	if (octeon_bootloader_entry_addr) {
		uasm_build_label(&l, p, label_enter_bootloader);
		/* Jump to the bootloader and restore K0 */
		UASM_i_LA(&p, K0, (long)octeon_bootloader_entry_addr);
		uasm_i_jr(&p, K0);
		uasm_i_dmfc0(&p, K0, C0_DESAVE);
	}
#endif
	uasm_resolve_relocs(relocs, labels);

	len = (int)(p - nmi_stage1_insns);
	pr_debug("Synthesized NMI stage 1 handler (%d instructions)\n", len);

	pr_debug("\t.set push\n");
	pr_debug("\t.set noreorder\n");
	for (i = 0; i < len; i++)
		pr_debug("\t.word 0x%08x\n", nmi_stage1_insns[i]);
	pr_debug("\t.set pop\n");

	if (len > 32)
		panic("NMI stage 1 handler exceeds 32 instructions, was %d\n",
		      len);
}

static int cpu2core(int cpu)
{
#ifdef CONFIG_SMP
	return cpu_logical_map(cpu);
#else
	return cvmx_get_core_num();
#endif
}

static int core2cpu(int coreid)
{
#ifdef CONFIG_SMP
	return cpu_number_map(coreid);
#else
	return 0;
#endif
}

/**
 * Poke the watchdog when an interrupt is received
 *
 * @cpl:
 * @dev_id:
 *
 * Returns
 */
static irqreturn_t octeon_wdt_poke_irq(int cpl, void *dev_id)
{
	unsigned int core = cvmx_get_core_num();
	int cpu = core2cpu(core);

	if (do_coundown) {
		if (per_cpu_countdown[cpu] > 0) {
			/* We're alive, poke the watchdog */
			cvmx_write_csr(CVMX_CIU_PP_POKEX(core), 1);
			per_cpu_countdown[cpu]--;
		} else {
			/* Bad news, you are about to reboot. */
			disable_irq_nosync(cpl);
			cpumask_clear_cpu(cpu, &irq_enabled_cpus);
		}
	} else {
		/* Not open, just ping away... */
		cvmx_write_csr(CVMX_CIU_PP_POKEX(core), 1);
	}
	return IRQ_HANDLED;
}

/* From setup.c */
extern int prom_putchar(char c);

/**
 * Write a string to the uart
 *
 * @str:        String to write
 */
static void octeon_wdt_write_string(const char *str)
{
	/* Just loop writing one byte at a time */
	while (*str)
		prom_putchar(*str++);
}

/**
 * Write a hex number out of the uart
 *
 * @value:      Number to display
 * @digits:     Number of digits to print (1 to 16)
 */
static void octeon_wdt_write_hex(u64 value, int digits)
{
	int d;
	int v;

	for (d = 0; d < digits; d++) {
		v = (value >> ((digits - d - 1) * 4)) & 0xf;
		if (v >= 10)
			prom_putchar('a' + v - 10);
		else
			prom_putchar('0' + v);
	}
}

static const char reg_name[][3] = {
	"$0", "at", "v0", "v1", "a0", "a1", "a2", "a3",
	"a4", "a5", "a6", "a7", "t0", "t1", "t2", "t3",
	"s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
	"t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra"
};

/**
 * NMI stage 3 handler. NMIs are handled in the following manner:
 * 1) The first NMI handler enables CVMSEG and transfers from
 * the bootbus region into normal memory. It is careful to not
 * destroy any registers.
 * 2) The second stage handler uses CVMSEG to save the registers
 * and create a stack for C code. It then calls the third level
 * handler with one argument, a pointer to the register values.
 * 3) The third, and final, level handler is the following C
 * function that prints out some useful infomration.
 *
 * @reg:    Pointer to register state before the NMI
 */
void octeon_wdt_nmi_stage3(u64 reg[32])
{
	u64 i;

	unsigned int coreid = cvmx_get_core_num();
	/*
	 * Save status and cause early to get them before any changes
	 * might happen.
	 */
	u64 cp0_cause = read_c0_cause();
	u64 cp0_status = read_c0_status();
	u64 cp0_error_epc = read_c0_errorepc();
	u64 cp0_epc = read_c0_epc();

	/* Delay so output from all cores output is not jumbled together. */
	__delay(100000000ull * coreid);

	octeon_wdt_write_string("\r\n*** NMI Watchdog interrupt on Core 0x");
	octeon_wdt_write_hex(coreid, 1);
	octeon_wdt_write_string(" ***\r\n");
	for (i = 0; i < 32; i++) {
		octeon_wdt_write_string("\t");
		octeon_wdt_write_string(reg_name[i]);
		octeon_wdt_write_string("\t0x");
		octeon_wdt_write_hex(reg[i], 16);
		if (i & 1)
			octeon_wdt_write_string("\r\n");
	}
	octeon_wdt_write_string("\terr_epc\t0x");
	octeon_wdt_write_hex(cp0_error_epc, 16);

	octeon_wdt_write_string("\tepc\t0x");
	octeon_wdt_write_hex(cp0_epc, 16);
	octeon_wdt_write_string("\r\n");

	octeon_wdt_write_string("\tstatus\t0x");
	octeon_wdt_write_hex(cp0_status, 16);
	octeon_wdt_write_string("\tcause\t0x");
	octeon_wdt_write_hex(cp0_cause, 16);
	octeon_wdt_write_string("\r\n");

	octeon_wdt_write_string("\tsum0\t0x");
	octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU_INTX_SUM0(coreid * 2)), 16);
	octeon_wdt_write_string("\ten0\t0x");
	octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)), 16);
	octeon_wdt_write_string("\r\n");

	octeon_wdt_write_string("*** Chip soft reset soon ***\r\n");
}

static void octeon_wdt_disable_interrupt(int cpu)
{
	unsigned int core;
	unsigned int irq;
	union cvmx_ciu_wdogx ciu_wdog;

	core = cpu2core(cpu);

	irq = OCTEON_IRQ_WDOG0 + core;

	/* Poke the watchdog to clear out its state */
	cvmx_write_csr(CVMX_CIU_PP_POKEX(core), 1);

	/* Disable the hardware. */
	ciu_wdog.u64 = 0;
	cvmx_write_csr(CVMX_CIU_WDOGX(core), ciu_wdog.u64);

	free_irq(irq, octeon_wdt_poke_irq);
}

static void octeon_wdt_setup_interrupt(int cpu)
{
	unsigned int core;
	unsigned int irq;
	union cvmx_ciu_wdogx ciu_wdog;

	core = cpu2core(cpu);

	/* Disable it before doing anything with the interrupts. */
	ciu_wdog.u64 = 0;
	cvmx_write_csr(CVMX_CIU_WDOGX(core), ciu_wdog.u64);

	per_cpu_countdown[cpu] = countdown_reset;

	irq = OCTEON_IRQ_WDOG0 + core;

	if (request_irq(irq, octeon_wdt_poke_irq,
			IRQF_NO_THREAD, "octeon_wdt", octeon_wdt_poke_irq))
		panic("octeon_wdt: Couldn't obtain irq %d", irq);

	cpumask_set_cpu(cpu, &irq_enabled_cpus);

	/* Poke the watchdog to clear out its state */
	cvmx_write_csr(CVMX_CIU_PP_POKEX(core), 1);

	/* Finally enable the watchdog now that all handlers are installed */
	ciu_wdog.u64 = 0;
	ciu_wdog.s.len = timeout_cnt;
	ciu_wdog.s.mode = 3;	/* 3 = Interrupt + NMI + Soft-Reset */
	cvmx_write_csr(CVMX_CIU_WDOGX(core), ciu_wdog.u64);
}

static int octeon_wdt_cpu_callback(struct notifier_block *nfb,
					   unsigned long action, void *hcpu)
{
	unsigned int cpu = (unsigned long)hcpu;

	switch (action & ~CPU_TASKS_FROZEN) {
	case CPU_DOWN_PREPARE:
		octeon_wdt_disable_interrupt(cpu);
		break;
	case CPU_ONLINE:
	case CPU_DOWN_FAILED:
		octeon_wdt_setup_interrupt(cpu);
		break;
	default:
		break;
	}
	return NOTIFY_OK;
}

static int octeon_wdt_ping(struct watchdog_device __always_unused *wdog)
{
	int cpu;
	int coreid;

	for_each_online_cpu(cpu) {
		coreid = cpu2core(cpu);
		cvmx_write_csr(CVMX_CIU_PP_POKEX(coreid), 1);
		per_cpu_countdown[cpu] = countdown_reset;
		if ((countdown_reset || !do_coundown) &&
		    !cpumask_test_cpu(cpu, &irq_enabled_cpus)) {
			/* We have to enable the irq */
			int irq = OCTEON_IRQ_WDOG0 + coreid;

			enable_irq(irq);
			cpumask_set_cpu(cpu, &irq_enabled_cpus);
		}
	}
	return 0;
}

static void octeon_wdt_calc_parameters(int t)
{
	unsigned int periods;

	timeout_sec = max_timeout_sec;


	/*
	 * Find the largest interrupt period, that can evenly divide
	 * the requested heartbeat time.
	 */
	while ((t % timeout_sec) != 0)
		timeout_sec--;

	periods = t / timeout_sec;

	/*
	 * The last two periods are after the irq is disabled, and
	 * then to the nmi, so we subtract them off.
	 */

	countdown_reset = periods > 2 ? periods - 2 : 0;
	heartbeat = t;
	timeout_cnt = ((octeon_get_io_clock_rate() >> 8) * timeout_sec) >> 8;
}

static int octeon_wdt_set_timeout(struct watchdog_device *wdog,
				  unsigned int t)
{
	int cpu;
	int coreid;
	union cvmx_ciu_wdogx ciu_wdog;

	if (t <= 0)
		return -1;

	octeon_wdt_calc_parameters(t);

	for_each_online_cpu(cpu) {
		coreid = cpu2core(cpu);
		cvmx_write_csr(CVMX_CIU_PP_POKEX(coreid), 1);
		ciu_wdog.u64 = 0;
		ciu_wdog.s.len = timeout_cnt;
		ciu_wdog.s.mode = 3;	/* 3 = Interrupt + NMI + Soft-Reset */
		cvmx_write_csr(CVMX_CIU_WDOGX(coreid), ciu_wdog.u64);
		cvmx_write_csr(CVMX_CIU_PP_POKEX(coreid), 1);
	}
	octeon_wdt_ping(wdog); /* Get the irqs back on. */
	return 0;
}

static int octeon_wdt_start(struct watchdog_device *wdog)
{
	octeon_wdt_ping(wdog);
	do_coundown = 1;
	return 0;
}

static int octeon_wdt_stop(struct watchdog_device *wdog)
{
	do_coundown = 0;
	octeon_wdt_ping(wdog);
	return 0;
}

static struct notifier_block octeon_wdt_cpu_notifier = {
	.notifier_call = octeon_wdt_cpu_callback,
};

static const struct watchdog_info octeon_wdt_info = {
	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
	.identity = "OCTEON",
};

static const struct watchdog_ops octeon_wdt_ops = {
	.owner		= THIS_MODULE,
	.start		= octeon_wdt_start,
	.stop		= octeon_wdt_stop,
	.ping		= octeon_wdt_ping,
	.set_timeout	= octeon_wdt_set_timeout,
};

static struct watchdog_device octeon_wdt = {
	.info	= &octeon_wdt_info,
	.ops	= &octeon_wdt_ops,
};

/**
 * Module/ driver initialization.
 *
 * Returns Zero on success
 */
static int __init octeon_wdt_init(void)
{
	int i;
	int ret;
	int cpu;
	u64 *ptr;

	/*
	 * Watchdog time expiration length = The 16 bits of LEN
	 * represent the most significant bits of a 24 bit decrementer
	 * that decrements every 256 cycles.
	 *
	 * Try for a timeout of 5 sec, if that fails a smaller number
	 * of even seconds,
	 */
	max_timeout_sec = 6;
	do {
		max_timeout_sec--;
		timeout_cnt = ((octeon_get_io_clock_rate() >> 8) *
			      max_timeout_sec) >> 8;
	} while (timeout_cnt > 65535);

	BUG_ON(timeout_cnt == 0);

	octeon_wdt_calc_parameters(heartbeat);

	pr_info("Initial granularity %d Sec\n", timeout_sec);

	octeon_wdt.timeout	= timeout_sec;
	octeon_wdt.max_timeout	= UINT_MAX;

	watchdog_set_nowayout(&octeon_wdt, nowayout);

	ret = watchdog_register_device(&octeon_wdt);
	if (ret) {
		pr_err("watchdog_register_device() failed: %d\n", ret);
		return ret;
	}

	/* Build the NMI handler ... */
	octeon_wdt_build_stage1();

	/* ... and install it. */
	ptr = (u64 *) nmi_stage1_insns;
	for (i = 0; i < 16; i++) {
		cvmx_write_csr(CVMX_MIO_BOOT_LOC_ADR, i * 8);
		cvmx_write_csr(CVMX_MIO_BOOT_LOC_DAT, ptr[i]);
	}
	cvmx_write_csr(CVMX_MIO_BOOT_LOC_CFGX(0), 0x81fc0000);

	cpumask_clear(&irq_enabled_cpus);

	cpu_notifier_register_begin();
	for_each_online_cpu(cpu)
		octeon_wdt_setup_interrupt(cpu);

	__register_hotcpu_notifier(&octeon_wdt_cpu_notifier);
	cpu_notifier_register_done();

	return 0;
}

/**
 * Module / driver shutdown
 */
static void __exit octeon_wdt_cleanup(void)
{
	int cpu;

	watchdog_unregister_device(&octeon_wdt);

	cpu_notifier_register_begin();
	__unregister_hotcpu_notifier(&octeon_wdt_cpu_notifier);

	for_each_online_cpu(cpu) {
		int core = cpu2core(cpu);
		/* Disable the watchdog */
		cvmx_write_csr(CVMX_CIU_WDOGX(core), 0);
		/* Free the interrupt handler */
		free_irq(OCTEON_IRQ_WDOG0 + core, octeon_wdt_poke_irq);
	}

	cpu_notifier_register_done();

	/*
	 * Disable the boot-bus memory, the code it points to is soon
	 * to go missing.
	 */
	cvmx_write_csr(CVMX_MIO_BOOT_LOC_CFGX(0), 0);
}

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Cavium Networks <[email protected]>");
MODULE_DESCRIPTION("Cavium Networks Octeon Watchdog driver.");
module_init(octeon_wdt_init);
module_exit(octeon_wdt_cleanup);
Commit	Line	Data
4c076fb4 DD	1	/*
	2	* Octeon Watchdog driver
	3	*
	4	* Copyright (C) 2007, 2008, 2009, 2010 Cavium Networks
	5	*
3d588c93 AK	6	* Converted to use WATCHDOG_CORE by Aaro Koskinen <[email protected]>.
3d588c93 AK	7	*
4c076fb4 DD	8	* Some parts derived from wdt.c
	9	*
	10	* (c) Copyright 1996-1997 Alan Cox <[email protected]>,
	11	* All Rights Reserved.
	12	*
	13	* This program is free software; you can redistribute it and/or
	14	* modify it under the terms of the GNU General Public License
	15	* as published by the Free Software Foundation; either version
	16	* 2 of the License, or (at your option) any later version.
	17	*
	18	* Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
	19	* warranty for any of this software. This material is provided
	20	* "AS-IS" and at no charge.
	21	*
	22	* (c) Copyright 1995 Alan Cox <[email protected]>
	23	*
	24	* This file is subject to the terms and conditions of the GNU General Public
	25	* License. See the file "COPYING" in the main directory of this archive
	26	* for more details.
	27	*
	28	*
	29	* The OCTEON watchdog has a maximum timeout of 2^32 * io_clock.
	30	* For most systems this is less than 10 seconds, so to allow for
	31	* software to request longer watchdog heartbeats, we maintain software
	32	* counters to count multiples of the base rate. If the system locks
	33	* up in such a manner that we can not run the software counters, the
	34	* only result is a watchdog reset sooner than was requested. But
	35	* that is OK, because in this case userspace would likely not be able
	36	* to do anything anyhow.
	37	*
	38	* The hardware watchdog interval we call the period. The OCTEON
	39	* watchdog goes through several stages, after the first period an
	40	* irq is asserted, then if it is not reset, after the next period NMI
	41	* is asserted, then after an additional period a chip wide soft reset.
	42	* So for the software counters, we reset watchdog after each period
	43	* and decrement the counter. But for the last two periods we need to
	44	* let the watchdog progress to the NMI stage so we disable the irq
	45	* and let it proceed. Once in the NMI, we print the register state
	46	* to the serial port and then wait for the reset.
	47	*
	48	* A watchdog is maintained for each CPU in the system, that way if
	49	* one CPU suffers a lockup, we also get a register dump and reset.
	50	* The userspace ping resets the watchdog on all CPUs.
	51	*
	52	* Before userspace opens the watchdog device, we still run the
	53	* watchdogs to catch any lockups that may be kernel related.
	54	*
	55	*/
	56
27c766aa JP	57	#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
27c766aa JP	58
4c076fb4 DD	59	#include <linux/miscdevice.h>
	60	#include <linux/interrupt.h>
	61	#include <linux/watchdog.h>
	62	#include <linux/cpumask.h>
	63	#include <linux/bitops.h>
	64	#include <linux/kernel.h>
	65	#include <linux/module.h>
	66	#include <linux/string.h>
	67	#include <linux/delay.h>
	68	#include <linux/cpu.h>
	69	#include <linux/smp.h>
	70	#include <linux/fs.h>
ca4d3e67	71	#include <linux/irq.h>
4c076fb4 DD	72
	73	#include <asm/mipsregs.h>
	74	#include <asm/uasm.h>
	75
	76	#include <asm/octeon/octeon.h>
	77
	78	/* The count needed to achieve timeout_sec. */
	79	static unsigned int timeout_cnt;
	80
	81	/* The maximum period supported. */
	82	static unsigned int max_timeout_sec;
	83
	84	/* The current period. */
	85	static unsigned int timeout_sec;
	86
	87	/* Set to non-zero when userspace countdown mode active */
	88	static int do_coundown;
	89	static unsigned int countdown_reset;
	90	static unsigned int per_cpu_countdown[NR_CPUS];
	91
	92	static cpumask_t irq_enabled_cpus;
	93
	94	#define WD_TIMO 60 /* Default heartbeat = 60 seconds */
	95
	96	static int heartbeat = WD_TIMO;
	97	module_param(heartbeat, int, S_IRUGO);
	98	MODULE_PARM_DESC(heartbeat,
	99	"Watchdog heartbeat in seconds. (0 < heartbeat, default="
	100	__MODULE_STRING(WD_TIMO) ")");
	101
86a1e189 WVS	102	static bool nowayout = WATCHDOG_NOWAYOUT;
86a1e189 WVS	103	module_param(nowayout, bool, S_IRUGO);
4c076fb4 DD	104	MODULE_PARM_DESC(nowayout,
	105	"Watchdog cannot be stopped once started (default="
	106	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
	107
8692cf0a	108	static u32 nmi_stage1_insns[64] __initdata;
4c076fb4	109	/* We need one branch and therefore one relocation per target label. */
8692cf0a AK	110	static struct uasm_label labels[5] __initdata;
8692cf0a AK	111	static struct uasm_reloc relocs[5] __initdata;
4c076fb4 DD	112
	113	enum lable_id {
	114	label_enter_bootloader = 1
	115	};
	116
	117	/* Some CP0 registers */
	118	#define K0 26
	119	#define C0_CVMMEMCTL 11, 7
	120	#define C0_STATUS 12, 0
	121	#define C0_EBASE 15, 1
	122	#define C0_DESAVE 31, 0
	123
	124	void octeon_wdt_nmi_stage2(void);
	125
	126	static void __init octeon_wdt_build_stage1(void)
	127	{
	128	int i;
	129	int len;
	130	u32 *p = nmi_stage1_insns;
	131	#ifdef CONFIG_HOTPLUG_CPU
	132	struct uasm_label *l = labels;
	133	struct uasm_reloc *r = relocs;
	134	#endif
	135
	136	/*
	137	* For the next few instructions running the debugger may
	138	* cause corruption of k0 in the saved registers. Since we're
	139	* about to crash, nobody probably cares.
	140	*
	141	* Save K0 into the debug scratch register
	142	*/
	143	uasm_i_dmtc0(&p, K0, C0_DESAVE);
	144
	145	uasm_i_mfc0(&p, K0, C0_STATUS);
	146	#ifdef CONFIG_HOTPLUG_CPU
f64988f1 AK	147	if (octeon_bootloader_entry_addr)
	148	uasm_il_bbit0(&p, &r, K0, ilog2(ST0_NMI),
	149	label_enter_bootloader);
4c076fb4 DD	150	#endif
	151	/* Force 64-bit addressing enabled */
	152	uasm_i_ori(&p, K0, K0, ST0_UX \| ST0_SX \| ST0_KX);
	153	uasm_i_mtc0(&p, K0, C0_STATUS);
	154
	155	#ifdef CONFIG_HOTPLUG_CPU
f64988f1 AK	156	if (octeon_bootloader_entry_addr) {
	157	uasm_i_mfc0(&p, K0, C0_EBASE);
	158	/* Coreid number in K0 */
	159	uasm_i_andi(&p, K0, K0, 0xf);
	160	/* 8 * coreid in bits 16-31 */
	161	uasm_i_dsll_safe(&p, K0, K0, 3 + 16);
	162	uasm_i_ori(&p, K0, K0, 0x8001);
	163	uasm_i_dsll_safe(&p, K0, K0, 16);
	164	uasm_i_ori(&p, K0, K0, 0x0700);
	165	uasm_i_drotr_safe(&p, K0, K0, 32);
	166	/*
	167	* Should result in: 0x8001,0700,0000,8*coreid which is
	168	* CVMX_CIU_WDOGX(coreid) - 0x0500
	169	*
	170	* Now ld K0, CVMX_CIU_WDOGX(coreid)
	171	*/
	172	uasm_i_ld(&p, K0, 0x500, K0);
	173	/*
	174	* If bit one set handle the NMI as a watchdog event.
	175	* otherwise transfer control to bootloader.
	176	*/
	177	uasm_il_bbit0(&p, &r, K0, 1, label_enter_bootloader);
	178	uasm_i_nop(&p);
	179	}
4c076fb4 DD	180	#endif
	181
	182	/* Clear Dcache so cvmseg works right. */
	183	uasm_i_cache(&p, 1, 0, 0);
	184
	185	/* Use K0 to do a read/modify/write of CVMMEMCTL */
	186	uasm_i_dmfc0(&p, K0, C0_CVMMEMCTL);
	187	/* Clear out the size of CVMSEG */
	188	uasm_i_dins(&p, K0, 0, 0, 6);
	189	/* Set CVMSEG to its largest value */
	190	uasm_i_ori(&p, K0, K0, 0x1c0 \| 54);
	191	/* Store the CVMMEMCTL value */
	192	uasm_i_dmtc0(&p, K0, C0_CVMMEMCTL);
	193
	194	/* Load the address of the second stage handler */
	195	UASM_i_LA(&p, K0, (long)octeon_wdt_nmi_stage2);
	196	uasm_i_jr(&p, K0);
	197	uasm_i_dmfc0(&p, K0, C0_DESAVE);
	198
	199	#ifdef CONFIG_HOTPLUG_CPU
f64988f1 AK	200	if (octeon_bootloader_entry_addr) {
	201	uasm_build_label(&l, p, label_enter_bootloader);
	202	/* Jump to the bootloader and restore K0 */
	203	UASM_i_LA(&p, K0, (long)octeon_bootloader_entry_addr);
	204	uasm_i_jr(&p, K0);
	205	uasm_i_dmfc0(&p, K0, C0_DESAVE);
	206	}
4c076fb4 DD	207	#endif
	208	uasm_resolve_relocs(relocs, labels);
	209
	210	len = (int)(p - nmi_stage1_insns);
27c766aa	211	pr_debug("Synthesized NMI stage 1 handler (%d instructions)\n", len);
4c076fb4 DD	212
	213	pr_debug("\t.set push\n");
	214	pr_debug("\t.set noreorder\n");
	215	for (i = 0; i < len; i++)
	216	pr_debug("\t.word 0x%08x\n", nmi_stage1_insns[i]);
	217	pr_debug("\t.set pop\n");
	218
	219	if (len > 32)
8692cf0a AK	220	panic("NMI stage 1 handler exceeds 32 instructions, was %d\n",
8692cf0a AK	221	len);
4c076fb4 DD	222	}
	223
	224	static int cpu2core(int cpu)
	225	{
	226	#ifdef CONFIG_SMP
	227	return cpu_logical_map(cpu);
	228	#else
	229	return cvmx_get_core_num();
	230	#endif
	231	}
	232
	233	static int core2cpu(int coreid)
	234	{
	235	#ifdef CONFIG_SMP
	236	return cpu_number_map(coreid);
	237	#else
	238	return 0;
	239	#endif
	240	}
	241
	242	/**
	243	* Poke the watchdog when an interrupt is received
	244	*
	245	* @cpl:
	246	* @dev_id:
	247	*
	248	* Returns
	249	*/
	250	static irqreturn_t octeon_wdt_poke_irq(int cpl, void *dev_id)
	251	{
	252	unsigned int core = cvmx_get_core_num();
	253	int cpu = core2cpu(core);
	254
	255	if (do_coundown) {
	256	if (per_cpu_countdown[cpu] > 0) {
	257	/* We're alive, poke the watchdog */
	258	cvmx_write_csr(CVMX_CIU_PP_POKEX(core), 1);
	259	per_cpu_countdown[cpu]--;
	260	} else {
	261	/* Bad news, you are about to reboot. */
	262	disable_irq_nosync(cpl);
	263	cpumask_clear_cpu(cpu, &irq_enabled_cpus);
	264	}
	265	} else {
	266	/* Not open, just ping away... */
	267	cvmx_write_csr(CVMX_CIU_PP_POKEX(core), 1);
	268	}
	269	return IRQ_HANDLED;
	270	}
	271
	272	/* From setup.c */
	273	extern int prom_putchar(char c);
	274
	275	/**
	276	* Write a string to the uart
	277	*
	278	* @str: String to write
	279	*/
	280	static void octeon_wdt_write_string(const char *str)
	281	{
	282	/* Just loop writing one byte at a time */
	283	while (*str)
	284	prom_putchar(*str++);
	285	}
286
287	/**
288	* Write a hex number out of the uart
289	*
290	* @value: Number to display
291	* @digits: Number of digits to print (1 to 16)
292	*/
293	static void octeon_wdt_write_hex(u64 value, int digits)
294	{
295	int d;
296	int v;
8692cf0a	297
4c076fb4 DD	298	for (d = 0; d < digits; d++) {
	299	v = (value >> ((digits - d - 1) * 4)) & 0xf;
	300	if (v >= 10)
	301	prom_putchar('a' + v - 10);
	302	else
	303	prom_putchar('0' + v);
	304	}
	305	}
	306
3a30c07e	307	static const char reg_name[][3] = {
4c076fb4 DD	308	"$0", "at", "v0", "v1", "a0", "a1", "a2", "a3",
	309	"a4", "a5", "a6", "a7", "t0", "t1", "t2", "t3",
	310	"s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
	311	"t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra"
	312	};
	313
	314	/**
	315	* NMI stage 3 handler. NMIs are handled in the following manner:
	316	* 1) The first NMI handler enables CVMSEG and transfers from
	317	* the bootbus region into normal memory. It is careful to not
	318	* destroy any registers.
	319	* 2) The second stage handler uses CVMSEG to save the registers
	320	* and create a stack for C code. It then calls the third level
	321	* handler with one argument, a pointer to the register values.
	322	* 3) The third, and final, level handler is the following C
	323	* function that prints out some useful infomration.
	324	*
	325	* @reg: Pointer to register state before the NMI
	326	*/
	327	void octeon_wdt_nmi_stage3(u64 reg[32])
	328	{
	329	u64 i;
	330
	331	unsigned int coreid = cvmx_get_core_num();
	332	/*
	333	* Save status and cause early to get them before any changes
	334	* might happen.
	335	*/
	336	u64 cp0_cause = read_c0_cause();
	337	u64 cp0_status = read_c0_status();
	338	u64 cp0_error_epc = read_c0_errorepc();
	339	u64 cp0_epc = read_c0_epc();
	340
	341	/* Delay so output from all cores output is not jumbled together. */
	342	__delay(100000000ull * coreid);
	343
	344	octeon_wdt_write_string("\r\n*** NMI Watchdog interrupt on Core 0x");
	345	octeon_wdt_write_hex(coreid, 1);
	346	octeon_wdt_write_string(" ***\r\n");
	347	for (i = 0; i < 32; i++) {
	348	octeon_wdt_write_string("\t");
	349	octeon_wdt_write_string(reg_name[i]);
	350	octeon_wdt_write_string("\t0x");
	351	octeon_wdt_write_hex(reg[i], 16);
	352	if (i & 1)
	353	octeon_wdt_write_string("\r\n");
	354	}
	355	octeon_wdt_write_string("\terr_epc\t0x");
	356	octeon_wdt_write_hex(cp0_error_epc, 16);
	357
	358	octeon_wdt_write_string("\tepc\t0x");
	359	octeon_wdt_write_hex(cp0_epc, 16);
	360	octeon_wdt_write_string("\r\n");
	361
	362	octeon_wdt_write_string("\tstatus\t0x");
	363	octeon_wdt_write_hex(cp0_status, 16);
	364	octeon_wdt_write_string("\tcause\t0x");
	365	octeon_wdt_write_hex(cp0_cause, 16);
	366	octeon_wdt_write_string("\r\n");
	367
	368	octeon_wdt_write_string("\tsum0\t0x");
	369	octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU_INTX_SUM0(coreid * 2)), 16);
	370	octeon_wdt_write_string("\ten0\t0x");
	371	octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)), 16);
372	octeon_wdt_write_string("\r\n");
373
374	octeon_wdt_write_string("* Chip soft reset soon *\r\n");
375	}
376
377	static void octeon_wdt_disable_interrupt(int cpu)
378	{
379	unsigned int core;
380	unsigned int irq;
381	union cvmx_ciu_wdogx ciu_wdog;
382
383	core = cpu2core(cpu);
384
385	irq = OCTEON_IRQ_WDOG0 + core;
386
387	/* Poke the watchdog to clear out its state */
388	cvmx_write_csr(CVMX_CIU_PP_POKEX(core), 1);
389
390	/* Disable the hardware. */
391	ciu_wdog.u64 = 0;
392	cvmx_write_csr(CVMX_CIU_WDOGX(core), ciu_wdog.u64);
393
394	free_irq(irq, octeon_wdt_poke_irq);
395	}
396
397	static void octeon_wdt_setup_interrupt(int cpu)
398	{
399	unsigned int core;
400	unsigned int irq;
401	union cvmx_ciu_wdogx ciu_wdog;
402
403	core = cpu2core(cpu);
404
405	/* Disable it before doing anything with the interrupts. */
406	ciu_wdog.u64 = 0;
407	cvmx_write_csr(CVMX_CIU_WDOGX(core), ciu_wdog.u64);
408
409	per_cpu_countdown[cpu] = countdown_reset;
410
411	irq = OCTEON_IRQ_WDOG0 + core;
412
413	if (request_irq(irq, octeon_wdt_poke_irq,
47bfd058	414	IRQF_NO_THREAD, "octeon_wdt", octeon_wdt_poke_irq))
4c076fb4 DD	415	panic("octeon_wdt: Couldn't obtain irq %d", irq);
	416
	417	cpumask_set_cpu(cpu, &irq_enabled_cpus);
	418
	419	/* Poke the watchdog to clear out its state */
	420	cvmx_write_csr(CVMX_CIU_PP_POKEX(core), 1);
	421
	422	/* Finally enable the watchdog now that all handlers are installed */
	423	ciu_wdog.u64 = 0;
	424	ciu_wdog.s.len = timeout_cnt;
	425	ciu_wdog.s.mode = 3; /* 3 = Interrupt + NMI + Soft-Reset */
	426	cvmx_write_csr(CVMX_CIU_WDOGX(core), ciu_wdog.u64);
	427	}
	428
	429	static int octeon_wdt_cpu_callback(struct notifier_block *nfb,
	430	unsigned long action, void *hcpu)
	431	{
	432	unsigned int cpu = (unsigned long)hcpu;
	433
ebbf677a	434	switch (action & ~CPU_TASKS_FROZEN) {
4c076fb4 DD	435	case CPU_DOWN_PREPARE:
	436	octeon_wdt_disable_interrupt(cpu);
	437	break;
	438	case CPU_ONLINE:
	439	case CPU_DOWN_FAILED:
	440	octeon_wdt_setup_interrupt(cpu);
	441	break;
	442	default:
	443	break;
	444	}
	445	return NOTIFY_OK;
	446	}
	447
3d588c93	448	static int octeon_wdt_ping(struct watchdog_device __always_unused *wdog)
4c076fb4 DD	449	{
	450	int cpu;
	451	int coreid;
	452
	453	for_each_online_cpu(cpu) {
	454	coreid = cpu2core(cpu);
	455	cvmx_write_csr(CVMX_CIU_PP_POKEX(coreid), 1);
	456	per_cpu_countdown[cpu] = countdown_reset;
	457	if ((countdown_reset \|\| !do_coundown) &&
	458	!cpumask_test_cpu(cpu, &irq_enabled_cpus)) {
	459	/* We have to enable the irq */
	460	int irq = OCTEON_IRQ_WDOG0 + coreid;
8692cf0a	461
4c076fb4 DD	462	enable_irq(irq);
	463	cpumask_set_cpu(cpu, &irq_enabled_cpus);
	464	}
	465	}
3d588c93	466	return 0;
4c076fb4 DD	467	}
	468
	469	static void octeon_wdt_calc_parameters(int t)
	470	{
	471	unsigned int periods;
	472
	473	timeout_sec = max_timeout_sec;
	474
	475
	476	/*
	477	* Find the largest interrupt period, that can evenly divide
	478	* the requested heartbeat time.
	479	*/
	480	while ((t % timeout_sec) != 0)
	481	timeout_sec--;
	482
	483	periods = t / timeout_sec;
	484
	485	/*
	486	* The last two periods are after the irq is disabled, and
	487	* then to the nmi, so we subtract them off.
	488	*/
	489
	490	countdown_reset = periods > 2 ? periods - 2 : 0;
	491	heartbeat = t;
468ffde4	492	timeout_cnt = ((octeon_get_io_clock_rate() >> 8) * timeout_sec) >> 8;
4c076fb4 DD	493	}
4c076fb4 DD	494
3d588c93 AK	495	static int octeon_wdt_set_timeout(struct watchdog_device *wdog,
3d588c93 AK	496	unsigned int t)
4c076fb4 DD	497	{
	498	int cpu;
	499	int coreid;
	500	union cvmx_ciu_wdogx ciu_wdog;
	501
	502	if (t <= 0)
	503	return -1;
	504
	505	octeon_wdt_calc_parameters(t);
	506
	507	for_each_online_cpu(cpu) {
	508	coreid = cpu2core(cpu);
	509	cvmx_write_csr(CVMX_CIU_PP_POKEX(coreid), 1);
	510	ciu_wdog.u64 = 0;
	511	ciu_wdog.s.len = timeout_cnt;
	512	ciu_wdog.s.mode = 3; /* 3 = Interrupt + NMI + Soft-Reset */
	513	cvmx_write_csr(CVMX_CIU_WDOGX(coreid), ciu_wdog.u64);
	514	cvmx_write_csr(CVMX_CIU_PP_POKEX(coreid), 1);
	515	}
3d588c93	516	octeon_wdt_ping(wdog); /* Get the irqs back on. */
4c076fb4 DD	517	return 0;
	518	}
	519
3d588c93	520	static int octeon_wdt_start(struct watchdog_device *wdog)
4c076fb4	521	{
3d588c93	522	octeon_wdt_ping(wdog);
4c076fb4	523	do_coundown = 1;
3d588c93	524	return 0;
4c076fb4 DD	525	}
4c076fb4 DD	526
3d588c93	527	static int octeon_wdt_stop(struct watchdog_device *wdog)
4c076fb4	528	{
3d588c93 AK	529	do_coundown = 0;
3d588c93 AK	530	octeon_wdt_ping(wdog);
4c076fb4 DD	531	return 0;
	532	}
	533
3d588c93 AK	534	static struct notifier_block octeon_wdt_cpu_notifier = {
3d588c93 AK	535	.notifier_call = octeon_wdt_cpu_callback,
4c076fb4 DD	536	};
4c076fb4 DD	537
3d588c93 AK	538	static const struct watchdog_info octeon_wdt_info = {
	539	.options = WDIOF_SETTIMEOUT \| WDIOF_MAGICCLOSE \| WDIOF_KEEPALIVEPING,
	540	.identity = "OCTEON",
4c076fb4 DD	541	};
4c076fb4 DD	542
3d588c93 AK	543	static const struct watchdog_ops octeon_wdt_ops = {
	544	.owner = THIS_MODULE,
	545	.start = octeon_wdt_start,
	546	.stop = octeon_wdt_stop,
	547	.ping = octeon_wdt_ping,
	548	.set_timeout = octeon_wdt_set_timeout,
4c076fb4 DD	549	};
4c076fb4 DD	550
3d588c93 AK	551	static struct watchdog_device octeon_wdt = {
	552	.info = &octeon_wdt_info,
	553	.ops = &octeon_wdt_ops,
	554	};
4c076fb4 DD	555
	556	/**
	557	* Module/ driver initialization.
	558	*
	559	* Returns Zero on success
	560	*/
	561	static int __init octeon_wdt_init(void)
	562	{
	563	int i;
	564	int ret;
	565	int cpu;
	566	u64 *ptr;
	567
	568	/*
	569	* Watchdog time expiration length = The 16 bits of LEN
	570	* represent the most significant bits of a 24 bit decrementer
	571	* that decrements every 256 cycles.
	572	*
	573	* Try for a timeout of 5 sec, if that fails a smaller number
	574	* of even seconds,
	575	*/
	576	max_timeout_sec = 6;
	577	do {
	578	max_timeout_sec--;
8692cf0a AK	579	timeout_cnt = ((octeon_get_io_clock_rate() >> 8) *
8692cf0a AK	580	max_timeout_sec) >> 8;
4c076fb4 DD	581	} while (timeout_cnt > 65535);
	582
	583	BUG_ON(timeout_cnt == 0);
	584
	585	octeon_wdt_calc_parameters(heartbeat);
	586
27c766aa	587	pr_info("Initial granularity %d Sec\n", timeout_sec);
4c076fb4	588
3d588c93 AK	589	octeon_wdt.timeout = timeout_sec;
	590	octeon_wdt.max_timeout = UINT_MAX;
	591
	592	watchdog_set_nowayout(&octeon_wdt, nowayout);
	593
	594	ret = watchdog_register_device(&octeon_wdt);
4c076fb4	595	if (ret) {
3d588c93 AK	596	pr_err("watchdog_register_device() failed: %d\n", ret);
3d588c93 AK	597	return ret;
4c076fb4 DD	598	}
	599
	600	/* Build the NMI handler ... */
	601	octeon_wdt_build_stage1();
	602
	603	/* ... and install it. */
	604	ptr = (u64 *) nmi_stage1_insns;
	605	for (i = 0; i < 16; i++) {
	606	cvmx_write_csr(CVMX_MIO_BOOT_LOC_ADR, i * 8);
	607	cvmx_write_csr(CVMX_MIO_BOOT_LOC_DAT, ptr[i]);
	608	}
	609	cvmx_write_csr(CVMX_MIO_BOOT_LOC_CFGX(0), 0x81fc0000);
	610
	611	cpumask_clear(&irq_enabled_cpus);
	612
99c3bf36	613	cpu_notifier_register_begin();
4c076fb4 DD	614	for_each_online_cpu(cpu)
	615	octeon_wdt_setup_interrupt(cpu);
	616
99c3bf36 SB	617	__register_hotcpu_notifier(&octeon_wdt_cpu_notifier);
	618	cpu_notifier_register_done();
	619
3d588c93	620	return 0;
4c076fb4 DD	621	}
	622
	623	/**
	624	* Module / driver shutdown
	625	*/
	626	static void __exit octeon_wdt_cleanup(void)
	627	{
	628	int cpu;
	629
3d588c93	630	watchdog_unregister_device(&octeon_wdt);
4c076fb4	631
99c3bf36 SB	632	cpu_notifier_register_begin();
99c3bf36 SB	633	__unregister_hotcpu_notifier(&octeon_wdt_cpu_notifier);
4c076fb4 DD	634
	635	for_each_online_cpu(cpu) {
	636	int core = cpu2core(cpu);
	637	/* Disable the watchdog */
	638	cvmx_write_csr(CVMX_CIU_WDOGX(core), 0);
	639	/* Free the interrupt handler */
	640	free_irq(OCTEON_IRQ_WDOG0 + core, octeon_wdt_poke_irq);
	641	}
99c3bf36 SB	642
	643	cpu_notifier_register_done();
	644
4c076fb4 DD	645	/*
	646	* Disable the boot-bus memory, the code it points to is soon
	647	* to go missing.
	648	*/
	649	cvmx_write_csr(CVMX_MIO_BOOT_LOC_CFGX(0), 0);
	650	}
	651
	652	MODULE_LICENSE("GPL");
	653	MODULE_AUTHOR("Cavium Networks <[email protected]>");
	654	MODULE_DESCRIPTION("Cavium Networks Octeon Watchdog driver.");
	655	module_init(octeon_wdt_init);
	656	module_exit(octeon_wdt_cleanup);