]>
Commit | Line | Data |
---|---|---|
ac27a0ec | 1 | /* |
617ba13b | 2 | * linux/fs/ext4/inode.c |
ac27a0ec DK |
3 | * |
4 | * Copyright (C) 1992, 1993, 1994, 1995 | |
5 | * Remy Card ([email protected]) | |
6 | * Laboratoire MASI - Institut Blaise Pascal | |
7 | * Universite Pierre et Marie Curie (Paris VI) | |
8 | * | |
9 | * from | |
10 | * | |
11 | * linux/fs/minix/inode.c | |
12 | * | |
13 | * Copyright (C) 1991, 1992 Linus Torvalds | |
14 | * | |
15 | * Goal-directed block allocation by Stephen Tweedie | |
16 | * ([email protected]), 1993, 1998 | |
17 | * Big-endian to little-endian byte-swapping/bitmaps by | |
18 | * David S. Miller ([email protected]), 1995 | |
19 | * 64-bit file support on 64-bit platforms by Jakub Jelinek | |
20 | * ([email protected]) | |
21 | * | |
617ba13b | 22 | * Assorted race fixes, rewrite of ext4_get_block() by Al Viro, 2000 |
ac27a0ec DK |
23 | */ |
24 | ||
25 | #include <linux/module.h> | |
26 | #include <linux/fs.h> | |
27 | #include <linux/time.h> | |
dab291af | 28 | #include <linux/jbd2.h> |
ac27a0ec DK |
29 | #include <linux/highuid.h> |
30 | #include <linux/pagemap.h> | |
31 | #include <linux/quotaops.h> | |
32 | #include <linux/string.h> | |
33 | #include <linux/buffer_head.h> | |
34 | #include <linux/writeback.h> | |
64769240 | 35 | #include <linux/pagevec.h> |
ac27a0ec DK |
36 | #include <linux/mpage.h> |
37 | #include <linux/uio.h> | |
38 | #include <linux/bio.h> | |
3dcf5451 | 39 | #include "ext4_jbd2.h" |
ac27a0ec DK |
40 | #include "xattr.h" |
41 | #include "acl.h" | |
d2a17637 | 42 | #include "ext4_extents.h" |
ac27a0ec | 43 | |
678aaf48 JK |
44 | static inline int ext4_begin_ordered_truncate(struct inode *inode, |
45 | loff_t new_size) | |
46 | { | |
47 | return jbd2_journal_begin_ordered_truncate(&EXT4_I(inode)->jinode, | |
48 | new_size); | |
49 | } | |
50 | ||
64769240 AT |
51 | static void ext4_invalidatepage(struct page *page, unsigned long offset); |
52 | ||
ac27a0ec DK |
53 | /* |
54 | * Test whether an inode is a fast symlink. | |
55 | */ | |
617ba13b | 56 | static int ext4_inode_is_fast_symlink(struct inode *inode) |
ac27a0ec | 57 | { |
617ba13b | 58 | int ea_blocks = EXT4_I(inode)->i_file_acl ? |
ac27a0ec DK |
59 | (inode->i_sb->s_blocksize >> 9) : 0; |
60 | ||
61 | return (S_ISLNK(inode->i_mode) && inode->i_blocks - ea_blocks == 0); | |
62 | } | |
63 | ||
64 | /* | |
617ba13b | 65 | * The ext4 forget function must perform a revoke if we are freeing data |
ac27a0ec DK |
66 | * which has been journaled. Metadata (eg. indirect blocks) must be |
67 | * revoked in all cases. | |
68 | * | |
69 | * "bh" may be NULL: a metadata block may have been freed from memory | |
70 | * but there may still be a record of it in the journal, and that record | |
71 | * still needs to be revoked. | |
72 | */ | |
617ba13b MC |
73 | int ext4_forget(handle_t *handle, int is_metadata, struct inode *inode, |
74 | struct buffer_head *bh, ext4_fsblk_t blocknr) | |
ac27a0ec DK |
75 | { |
76 | int err; | |
77 | ||
78 | might_sleep(); | |
79 | ||
80 | BUFFER_TRACE(bh, "enter"); | |
81 | ||
82 | jbd_debug(4, "forgetting bh %p: is_metadata = %d, mode %o, " | |
83 | "data mode %lx\n", | |
84 | bh, is_metadata, inode->i_mode, | |
85 | test_opt(inode->i_sb, DATA_FLAGS)); | |
86 | ||
87 | /* Never use the revoke function if we are doing full data | |
88 | * journaling: there is no need to, and a V1 superblock won't | |
89 | * support it. Otherwise, only skip the revoke on un-journaled | |
90 | * data blocks. */ | |
91 | ||
617ba13b MC |
92 | if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA || |
93 | (!is_metadata && !ext4_should_journal_data(inode))) { | |
ac27a0ec | 94 | if (bh) { |
dab291af | 95 | BUFFER_TRACE(bh, "call jbd2_journal_forget"); |
617ba13b | 96 | return ext4_journal_forget(handle, bh); |
ac27a0ec DK |
97 | } |
98 | return 0; | |
99 | } | |
100 | ||
101 | /* | |
102 | * data!=journal && (is_metadata || should_journal_data(inode)) | |
103 | */ | |
617ba13b MC |
104 | BUFFER_TRACE(bh, "call ext4_journal_revoke"); |
105 | err = ext4_journal_revoke(handle, blocknr, bh); | |
ac27a0ec | 106 | if (err) |
46e665e9 | 107 | ext4_abort(inode->i_sb, __func__, |
ac27a0ec DK |
108 | "error %d when attempting revoke", err); |
109 | BUFFER_TRACE(bh, "exit"); | |
110 | return err; | |
111 | } | |
112 | ||
113 | /* | |
114 | * Work out how many blocks we need to proceed with the next chunk of a | |
115 | * truncate transaction. | |
116 | */ | |
117 | static unsigned long blocks_for_truncate(struct inode *inode) | |
118 | { | |
725d26d3 | 119 | ext4_lblk_t needed; |
ac27a0ec DK |
120 | |
121 | needed = inode->i_blocks >> (inode->i_sb->s_blocksize_bits - 9); | |
122 | ||
123 | /* Give ourselves just enough room to cope with inodes in which | |
124 | * i_blocks is corrupt: we've seen disk corruptions in the past | |
125 | * which resulted in random data in an inode which looked enough | |
617ba13b | 126 | * like a regular file for ext4 to try to delete it. Things |
ac27a0ec DK |
127 | * will go a bit crazy if that happens, but at least we should |
128 | * try not to panic the whole kernel. */ | |
129 | if (needed < 2) | |
130 | needed = 2; | |
131 | ||
132 | /* But we need to bound the transaction so we don't overflow the | |
133 | * journal. */ | |
617ba13b MC |
134 | if (needed > EXT4_MAX_TRANS_DATA) |
135 | needed = EXT4_MAX_TRANS_DATA; | |
ac27a0ec | 136 | |
617ba13b | 137 | return EXT4_DATA_TRANS_BLOCKS(inode->i_sb) + needed; |
ac27a0ec DK |
138 | } |
139 | ||
140 | /* | |
141 | * Truncate transactions can be complex and absolutely huge. So we need to | |
142 | * be able to restart the transaction at a conventient checkpoint to make | |
143 | * sure we don't overflow the journal. | |
144 | * | |
145 | * start_transaction gets us a new handle for a truncate transaction, | |
146 | * and extend_transaction tries to extend the existing one a bit. If | |
147 | * extend fails, we need to propagate the failure up and restart the | |
148 | * transaction in the top-level truncate loop. --sct | |
149 | */ | |
150 | static handle_t *start_transaction(struct inode *inode) | |
151 | { | |
152 | handle_t *result; | |
153 | ||
617ba13b | 154 | result = ext4_journal_start(inode, blocks_for_truncate(inode)); |
ac27a0ec DK |
155 | if (!IS_ERR(result)) |
156 | return result; | |
157 | ||
617ba13b | 158 | ext4_std_error(inode->i_sb, PTR_ERR(result)); |
ac27a0ec DK |
159 | return result; |
160 | } | |
161 | ||
162 | /* | |
163 | * Try to extend this transaction for the purposes of truncation. | |
164 | * | |
165 | * Returns 0 if we managed to create more room. If we can't create more | |
166 | * room, and the transaction must be restarted we return 1. | |
167 | */ | |
168 | static int try_to_extend_transaction(handle_t *handle, struct inode *inode) | |
169 | { | |
617ba13b | 170 | if (handle->h_buffer_credits > EXT4_RESERVE_TRANS_BLOCKS) |
ac27a0ec | 171 | return 0; |
617ba13b | 172 | if (!ext4_journal_extend(handle, blocks_for_truncate(inode))) |
ac27a0ec DK |
173 | return 0; |
174 | return 1; | |
175 | } | |
176 | ||
177 | /* | |
178 | * Restart the transaction associated with *handle. This does a commit, | |
179 | * so before we call here everything must be consistently dirtied against | |
180 | * this transaction. | |
181 | */ | |
617ba13b | 182 | static int ext4_journal_test_restart(handle_t *handle, struct inode *inode) |
ac27a0ec DK |
183 | { |
184 | jbd_debug(2, "restarting handle %p\n", handle); | |
617ba13b | 185 | return ext4_journal_restart(handle, blocks_for_truncate(inode)); |
ac27a0ec DK |
186 | } |
187 | ||
188 | /* | |
189 | * Called at the last iput() if i_nlink is zero. | |
190 | */ | |
617ba13b | 191 | void ext4_delete_inode (struct inode * inode) |
ac27a0ec DK |
192 | { |
193 | handle_t *handle; | |
194 | ||
678aaf48 JK |
195 | if (ext4_should_order_data(inode)) |
196 | ext4_begin_ordered_truncate(inode, 0); | |
ac27a0ec DK |
197 | truncate_inode_pages(&inode->i_data, 0); |
198 | ||
199 | if (is_bad_inode(inode)) | |
200 | goto no_delete; | |
201 | ||
202 | handle = start_transaction(inode); | |
203 | if (IS_ERR(handle)) { | |
204 | /* | |
205 | * If we're going to skip the normal cleanup, we still need to | |
206 | * make sure that the in-core orphan linked list is properly | |
207 | * cleaned up. | |
208 | */ | |
617ba13b | 209 | ext4_orphan_del(NULL, inode); |
ac27a0ec DK |
210 | goto no_delete; |
211 | } | |
212 | ||
213 | if (IS_SYNC(inode)) | |
214 | handle->h_sync = 1; | |
215 | inode->i_size = 0; | |
216 | if (inode->i_blocks) | |
617ba13b | 217 | ext4_truncate(inode); |
ac27a0ec | 218 | /* |
617ba13b | 219 | * Kill off the orphan record which ext4_truncate created. |
ac27a0ec | 220 | * AKPM: I think this can be inside the above `if'. |
617ba13b | 221 | * Note that ext4_orphan_del() has to be able to cope with the |
ac27a0ec | 222 | * deletion of a non-existent orphan - this is because we don't |
617ba13b | 223 | * know if ext4_truncate() actually created an orphan record. |
ac27a0ec DK |
224 | * (Well, we could do this if we need to, but heck - it works) |
225 | */ | |
617ba13b MC |
226 | ext4_orphan_del(handle, inode); |
227 | EXT4_I(inode)->i_dtime = get_seconds(); | |
ac27a0ec DK |
228 | |
229 | /* | |
230 | * One subtle ordering requirement: if anything has gone wrong | |
231 | * (transaction abort, IO errors, whatever), then we can still | |
232 | * do these next steps (the fs will already have been marked as | |
233 | * having errors), but we can't free the inode if the mark_dirty | |
234 | * fails. | |
235 | */ | |
617ba13b | 236 | if (ext4_mark_inode_dirty(handle, inode)) |
ac27a0ec DK |
237 | /* If that failed, just do the required in-core inode clear. */ |
238 | clear_inode(inode); | |
239 | else | |
617ba13b MC |
240 | ext4_free_inode(handle, inode); |
241 | ext4_journal_stop(handle); | |
ac27a0ec DK |
242 | return; |
243 | no_delete: | |
244 | clear_inode(inode); /* We must guarantee clearing of inode... */ | |
245 | } | |
246 | ||
247 | typedef struct { | |
248 | __le32 *p; | |
249 | __le32 key; | |
250 | struct buffer_head *bh; | |
251 | } Indirect; | |
252 | ||
253 | static inline void add_chain(Indirect *p, struct buffer_head *bh, __le32 *v) | |
254 | { | |
255 | p->key = *(p->p = v); | |
256 | p->bh = bh; | |
257 | } | |
258 | ||
ac27a0ec | 259 | /** |
617ba13b | 260 | * ext4_block_to_path - parse the block number into array of offsets |
ac27a0ec DK |
261 | * @inode: inode in question (we are only interested in its superblock) |
262 | * @i_block: block number to be parsed | |
263 | * @offsets: array to store the offsets in | |
8c55e204 DK |
264 | * @boundary: set this non-zero if the referred-to block is likely to be |
265 | * followed (on disk) by an indirect block. | |
ac27a0ec | 266 | * |
617ba13b | 267 | * To store the locations of file's data ext4 uses a data structure common |
ac27a0ec DK |
268 | * for UNIX filesystems - tree of pointers anchored in the inode, with |
269 | * data blocks at leaves and indirect blocks in intermediate nodes. | |
270 | * This function translates the block number into path in that tree - | |
271 | * return value is the path length and @offsets[n] is the offset of | |
272 | * pointer to (n+1)th node in the nth one. If @block is out of range | |
273 | * (negative or too large) warning is printed and zero returned. | |
274 | * | |
275 | * Note: function doesn't find node addresses, so no IO is needed. All | |
276 | * we need to know is the capacity of indirect blocks (taken from the | |
277 | * inode->i_sb). | |
278 | */ | |
279 | ||
280 | /* | |
281 | * Portability note: the last comparison (check that we fit into triple | |
282 | * indirect block) is spelled differently, because otherwise on an | |
283 | * architecture with 32-bit longs and 8Kb pages we might get into trouble | |
284 | * if our filesystem had 8Kb blocks. We might use long long, but that would | |
285 | * kill us on x86. Oh, well, at least the sign propagation does not matter - | |
286 | * i_block would have to be negative in the very beginning, so we would not | |
287 | * get there at all. | |
288 | */ | |
289 | ||
617ba13b | 290 | static int ext4_block_to_path(struct inode *inode, |
725d26d3 AK |
291 | ext4_lblk_t i_block, |
292 | ext4_lblk_t offsets[4], int *boundary) | |
ac27a0ec | 293 | { |
617ba13b MC |
294 | int ptrs = EXT4_ADDR_PER_BLOCK(inode->i_sb); |
295 | int ptrs_bits = EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb); | |
296 | const long direct_blocks = EXT4_NDIR_BLOCKS, | |
ac27a0ec DK |
297 | indirect_blocks = ptrs, |
298 | double_blocks = (1 << (ptrs_bits * 2)); | |
299 | int n = 0; | |
300 | int final = 0; | |
301 | ||
302 | if (i_block < 0) { | |
617ba13b | 303 | ext4_warning (inode->i_sb, "ext4_block_to_path", "block < 0"); |
ac27a0ec DK |
304 | } else if (i_block < direct_blocks) { |
305 | offsets[n++] = i_block; | |
306 | final = direct_blocks; | |
307 | } else if ( (i_block -= direct_blocks) < indirect_blocks) { | |
617ba13b | 308 | offsets[n++] = EXT4_IND_BLOCK; |
ac27a0ec DK |
309 | offsets[n++] = i_block; |
310 | final = ptrs; | |
311 | } else if ((i_block -= indirect_blocks) < double_blocks) { | |
617ba13b | 312 | offsets[n++] = EXT4_DIND_BLOCK; |
ac27a0ec DK |
313 | offsets[n++] = i_block >> ptrs_bits; |
314 | offsets[n++] = i_block & (ptrs - 1); | |
315 | final = ptrs; | |
316 | } else if (((i_block -= double_blocks) >> (ptrs_bits * 2)) < ptrs) { | |
617ba13b | 317 | offsets[n++] = EXT4_TIND_BLOCK; |
ac27a0ec DK |
318 | offsets[n++] = i_block >> (ptrs_bits * 2); |
319 | offsets[n++] = (i_block >> ptrs_bits) & (ptrs - 1); | |
320 | offsets[n++] = i_block & (ptrs - 1); | |
321 | final = ptrs; | |
322 | } else { | |
e2b46574 | 323 | ext4_warning(inode->i_sb, "ext4_block_to_path", |
0e855ac8 | 324 | "block %lu > max", |
e2b46574 ES |
325 | i_block + direct_blocks + |
326 | indirect_blocks + double_blocks); | |
ac27a0ec DK |
327 | } |
328 | if (boundary) | |
329 | *boundary = final - 1 - (i_block & (ptrs - 1)); | |
330 | return n; | |
331 | } | |
332 | ||
333 | /** | |
617ba13b | 334 | * ext4_get_branch - read the chain of indirect blocks leading to data |
ac27a0ec DK |
335 | * @inode: inode in question |
336 | * @depth: depth of the chain (1 - direct pointer, etc.) | |
337 | * @offsets: offsets of pointers in inode/indirect blocks | |
338 | * @chain: place to store the result | |
339 | * @err: here we store the error value | |
340 | * | |
341 | * Function fills the array of triples <key, p, bh> and returns %NULL | |
342 | * if everything went OK or the pointer to the last filled triple | |
343 | * (incomplete one) otherwise. Upon the return chain[i].key contains | |
344 | * the number of (i+1)-th block in the chain (as it is stored in memory, | |
345 | * i.e. little-endian 32-bit), chain[i].p contains the address of that | |
346 | * number (it points into struct inode for i==0 and into the bh->b_data | |
347 | * for i>0) and chain[i].bh points to the buffer_head of i-th indirect | |
348 | * block for i>0 and NULL for i==0. In other words, it holds the block | |
349 | * numbers of the chain, addresses they were taken from (and where we can | |
350 | * verify that chain did not change) and buffer_heads hosting these | |
351 | * numbers. | |
352 | * | |
353 | * Function stops when it stumbles upon zero pointer (absent block) | |
354 | * (pointer to last triple returned, *@err == 0) | |
355 | * or when it gets an IO error reading an indirect block | |
356 | * (ditto, *@err == -EIO) | |
ac27a0ec DK |
357 | * or when it reads all @depth-1 indirect blocks successfully and finds |
358 | * the whole chain, all way to the data (returns %NULL, *err == 0). | |
c278bfec AK |
359 | * |
360 | * Need to be called with | |
0e855ac8 | 361 | * down_read(&EXT4_I(inode)->i_data_sem) |
ac27a0ec | 362 | */ |
725d26d3 AK |
363 | static Indirect *ext4_get_branch(struct inode *inode, int depth, |
364 | ext4_lblk_t *offsets, | |
ac27a0ec DK |
365 | Indirect chain[4], int *err) |
366 | { | |
367 | struct super_block *sb = inode->i_sb; | |
368 | Indirect *p = chain; | |
369 | struct buffer_head *bh; | |
370 | ||
371 | *err = 0; | |
372 | /* i_data is not going away, no lock needed */ | |
617ba13b | 373 | add_chain (chain, NULL, EXT4_I(inode)->i_data + *offsets); |
ac27a0ec DK |
374 | if (!p->key) |
375 | goto no_block; | |
376 | while (--depth) { | |
377 | bh = sb_bread(sb, le32_to_cpu(p->key)); | |
378 | if (!bh) | |
379 | goto failure; | |
ac27a0ec DK |
380 | add_chain(++p, bh, (__le32*)bh->b_data + *++offsets); |
381 | /* Reader: end */ | |
382 | if (!p->key) | |
383 | goto no_block; | |
384 | } | |
385 | return NULL; | |
386 | ||
ac27a0ec DK |
387 | failure: |
388 | *err = -EIO; | |
389 | no_block: | |
390 | return p; | |
391 | } | |
392 | ||
393 | /** | |
617ba13b | 394 | * ext4_find_near - find a place for allocation with sufficient locality |
ac27a0ec DK |
395 | * @inode: owner |
396 | * @ind: descriptor of indirect block. | |
397 | * | |
1cc8dcf5 | 398 | * This function returns the preferred place for block allocation. |
ac27a0ec DK |
399 | * It is used when heuristic for sequential allocation fails. |
400 | * Rules are: | |
401 | * + if there is a block to the left of our position - allocate near it. | |
402 | * + if pointer will live in indirect block - allocate near that block. | |
403 | * + if pointer will live in inode - allocate in the same | |
404 | * cylinder group. | |
405 | * | |
406 | * In the latter case we colour the starting block by the callers PID to | |
407 | * prevent it from clashing with concurrent allocations for a different inode | |
408 | * in the same block group. The PID is used here so that functionally related | |
409 | * files will be close-by on-disk. | |
410 | * | |
411 | * Caller must make sure that @ind is valid and will stay that way. | |
412 | */ | |
617ba13b | 413 | static ext4_fsblk_t ext4_find_near(struct inode *inode, Indirect *ind) |
ac27a0ec | 414 | { |
617ba13b | 415 | struct ext4_inode_info *ei = EXT4_I(inode); |
ac27a0ec DK |
416 | __le32 *start = ind->bh ? (__le32*) ind->bh->b_data : ei->i_data; |
417 | __le32 *p; | |
617ba13b | 418 | ext4_fsblk_t bg_start; |
74d3487f | 419 | ext4_fsblk_t last_block; |
617ba13b | 420 | ext4_grpblk_t colour; |
ac27a0ec DK |
421 | |
422 | /* Try to find previous block */ | |
423 | for (p = ind->p - 1; p >= start; p--) { | |
424 | if (*p) | |
425 | return le32_to_cpu(*p); | |
426 | } | |
427 | ||
428 | /* No such thing, so let's try location of indirect block */ | |
429 | if (ind->bh) | |
430 | return ind->bh->b_blocknr; | |
431 | ||
432 | /* | |
433 | * It is going to be referred to from the inode itself? OK, just put it | |
434 | * into the same cylinder group then. | |
435 | */ | |
617ba13b | 436 | bg_start = ext4_group_first_block_no(inode->i_sb, ei->i_block_group); |
74d3487f VC |
437 | last_block = ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es) - 1; |
438 | ||
439 | if (bg_start + EXT4_BLOCKS_PER_GROUP(inode->i_sb) <= last_block) | |
440 | colour = (current->pid % 16) * | |
617ba13b | 441 | (EXT4_BLOCKS_PER_GROUP(inode->i_sb) / 16); |
74d3487f VC |
442 | else |
443 | colour = (current->pid % 16) * ((last_block - bg_start) / 16); | |
ac27a0ec DK |
444 | return bg_start + colour; |
445 | } | |
446 | ||
447 | /** | |
1cc8dcf5 | 448 | * ext4_find_goal - find a preferred place for allocation. |
ac27a0ec DK |
449 | * @inode: owner |
450 | * @block: block we want | |
ac27a0ec | 451 | * @partial: pointer to the last triple within a chain |
ac27a0ec | 452 | * |
1cc8dcf5 | 453 | * Normally this function find the preferred place for block allocation, |
fb01bfda | 454 | * returns it. |
ac27a0ec | 455 | */ |
725d26d3 | 456 | static ext4_fsblk_t ext4_find_goal(struct inode *inode, ext4_lblk_t block, |
fb01bfda | 457 | Indirect *partial) |
ac27a0ec | 458 | { |
617ba13b | 459 | struct ext4_block_alloc_info *block_i; |
ac27a0ec | 460 | |
617ba13b | 461 | block_i = EXT4_I(inode)->i_block_alloc_info; |
ac27a0ec DK |
462 | |
463 | /* | |
464 | * try the heuristic for sequential allocation, | |
465 | * failing that at least try to get decent locality. | |
466 | */ | |
467 | if (block_i && (block == block_i->last_alloc_logical_block + 1) | |
468 | && (block_i->last_alloc_physical_block != 0)) { | |
469 | return block_i->last_alloc_physical_block + 1; | |
470 | } | |
471 | ||
617ba13b | 472 | return ext4_find_near(inode, partial); |
ac27a0ec DK |
473 | } |
474 | ||
475 | /** | |
617ba13b | 476 | * ext4_blks_to_allocate: Look up the block map and count the number |
ac27a0ec DK |
477 | * of direct blocks need to be allocated for the given branch. |
478 | * | |
479 | * @branch: chain of indirect blocks | |
480 | * @k: number of blocks need for indirect blocks | |
481 | * @blks: number of data blocks to be mapped. | |
482 | * @blocks_to_boundary: the offset in the indirect block | |
483 | * | |
484 | * return the total number of blocks to be allocate, including the | |
485 | * direct and indirect blocks. | |
486 | */ | |
617ba13b | 487 | static int ext4_blks_to_allocate(Indirect *branch, int k, unsigned long blks, |
ac27a0ec DK |
488 | int blocks_to_boundary) |
489 | { | |
490 | unsigned long count = 0; | |
491 | ||
492 | /* | |
493 | * Simple case, [t,d]Indirect block(s) has not allocated yet | |
494 | * then it's clear blocks on that path have not allocated | |
495 | */ | |
496 | if (k > 0) { | |
497 | /* right now we don't handle cross boundary allocation */ | |
498 | if (blks < blocks_to_boundary + 1) | |
499 | count += blks; | |
500 | else | |
501 | count += blocks_to_boundary + 1; | |
502 | return count; | |
503 | } | |
504 | ||
505 | count++; | |
506 | while (count < blks && count <= blocks_to_boundary && | |
507 | le32_to_cpu(*(branch[0].p + count)) == 0) { | |
508 | count++; | |
509 | } | |
510 | return count; | |
511 | } | |
512 | ||
513 | /** | |
617ba13b | 514 | * ext4_alloc_blocks: multiple allocate blocks needed for a branch |
ac27a0ec DK |
515 | * @indirect_blks: the number of blocks need to allocate for indirect |
516 | * blocks | |
517 | * | |
518 | * @new_blocks: on return it will store the new block numbers for | |
519 | * the indirect blocks(if needed) and the first direct block, | |
520 | * @blks: on return it will store the total number of allocated | |
521 | * direct blocks | |
522 | */ | |
617ba13b | 523 | static int ext4_alloc_blocks(handle_t *handle, struct inode *inode, |
7061eba7 AK |
524 | ext4_lblk_t iblock, ext4_fsblk_t goal, |
525 | int indirect_blks, int blks, | |
526 | ext4_fsblk_t new_blocks[4], int *err) | |
ac27a0ec DK |
527 | { |
528 | int target, i; | |
7061eba7 | 529 | unsigned long count = 0, blk_allocated = 0; |
ac27a0ec | 530 | int index = 0; |
617ba13b | 531 | ext4_fsblk_t current_block = 0; |
ac27a0ec DK |
532 | int ret = 0; |
533 | ||
534 | /* | |
535 | * Here we try to allocate the requested multiple blocks at once, | |
536 | * on a best-effort basis. | |
537 | * To build a branch, we should allocate blocks for | |
538 | * the indirect blocks(if not allocated yet), and at least | |
539 | * the first direct block of this branch. That's the | |
540 | * minimum number of blocks need to allocate(required) | |
541 | */ | |
7061eba7 AK |
542 | /* first we try to allocate the indirect blocks */ |
543 | target = indirect_blks; | |
544 | while (target > 0) { | |
ac27a0ec DK |
545 | count = target; |
546 | /* allocating blocks for indirect blocks and direct blocks */ | |
7061eba7 AK |
547 | current_block = ext4_new_meta_blocks(handle, inode, |
548 | goal, &count, err); | |
ac27a0ec DK |
549 | if (*err) |
550 | goto failed_out; | |
551 | ||
552 | target -= count; | |
553 | /* allocate blocks for indirect blocks */ | |
554 | while (index < indirect_blks && count) { | |
555 | new_blocks[index++] = current_block++; | |
556 | count--; | |
557 | } | |
7061eba7 AK |
558 | if (count > 0) { |
559 | /* | |
560 | * save the new block number | |
561 | * for the first direct block | |
562 | */ | |
563 | new_blocks[index] = current_block; | |
564 | printk(KERN_INFO "%s returned more blocks than " | |
565 | "requested\n", __func__); | |
566 | WARN_ON(1); | |
ac27a0ec | 567 | break; |
7061eba7 | 568 | } |
ac27a0ec DK |
569 | } |
570 | ||
7061eba7 AK |
571 | target = blks - count ; |
572 | blk_allocated = count; | |
573 | if (!target) | |
574 | goto allocated; | |
575 | /* Now allocate data blocks */ | |
576 | count = target; | |
654b4908 | 577 | /* allocating blocks for data blocks */ |
7061eba7 AK |
578 | current_block = ext4_new_blocks(handle, inode, iblock, |
579 | goal, &count, err); | |
580 | if (*err && (target == blks)) { | |
581 | /* | |
582 | * if the allocation failed and we didn't allocate | |
583 | * any blocks before | |
584 | */ | |
585 | goto failed_out; | |
586 | } | |
587 | if (!*err) { | |
588 | if (target == blks) { | |
589 | /* | |
590 | * save the new block number | |
591 | * for the first direct block | |
592 | */ | |
593 | new_blocks[index] = current_block; | |
594 | } | |
595 | blk_allocated += count; | |
596 | } | |
597 | allocated: | |
ac27a0ec | 598 | /* total number of blocks allocated for direct blocks */ |
7061eba7 | 599 | ret = blk_allocated; |
ac27a0ec DK |
600 | *err = 0; |
601 | return ret; | |
602 | failed_out: | |
603 | for (i = 0; i <index; i++) | |
c9de560d | 604 | ext4_free_blocks(handle, inode, new_blocks[i], 1, 0); |
ac27a0ec DK |
605 | return ret; |
606 | } | |
607 | ||
608 | /** | |
617ba13b | 609 | * ext4_alloc_branch - allocate and set up a chain of blocks. |
ac27a0ec DK |
610 | * @inode: owner |
611 | * @indirect_blks: number of allocated indirect blocks | |
612 | * @blks: number of allocated direct blocks | |
613 | * @offsets: offsets (in the blocks) to store the pointers to next. | |
614 | * @branch: place to store the chain in. | |
615 | * | |
616 | * This function allocates blocks, zeroes out all but the last one, | |
617 | * links them into chain and (if we are synchronous) writes them to disk. | |
618 | * In other words, it prepares a branch that can be spliced onto the | |
619 | * inode. It stores the information about that chain in the branch[], in | |
617ba13b | 620 | * the same format as ext4_get_branch() would do. We are calling it after |
ac27a0ec DK |
621 | * we had read the existing part of chain and partial points to the last |
622 | * triple of that (one with zero ->key). Upon the exit we have the same | |
617ba13b | 623 | * picture as after the successful ext4_get_block(), except that in one |
ac27a0ec DK |
624 | * place chain is disconnected - *branch->p is still zero (we did not |
625 | * set the last link), but branch->key contains the number that should | |
626 | * be placed into *branch->p to fill that gap. | |
627 | * | |
628 | * If allocation fails we free all blocks we've allocated (and forget | |
629 | * their buffer_heads) and return the error value the from failed | |
617ba13b | 630 | * ext4_alloc_block() (normally -ENOSPC). Otherwise we set the chain |
ac27a0ec DK |
631 | * as described above and return 0. |
632 | */ | |
617ba13b | 633 | static int ext4_alloc_branch(handle_t *handle, struct inode *inode, |
7061eba7 AK |
634 | ext4_lblk_t iblock, int indirect_blks, |
635 | int *blks, ext4_fsblk_t goal, | |
636 | ext4_lblk_t *offsets, Indirect *branch) | |
ac27a0ec DK |
637 | { |
638 | int blocksize = inode->i_sb->s_blocksize; | |
639 | int i, n = 0; | |
640 | int err = 0; | |
641 | struct buffer_head *bh; | |
642 | int num; | |
617ba13b MC |
643 | ext4_fsblk_t new_blocks[4]; |
644 | ext4_fsblk_t current_block; | |
ac27a0ec | 645 | |
7061eba7 | 646 | num = ext4_alloc_blocks(handle, inode, iblock, goal, indirect_blks, |
ac27a0ec DK |
647 | *blks, new_blocks, &err); |
648 | if (err) | |
649 | return err; | |
650 | ||
651 | branch[0].key = cpu_to_le32(new_blocks[0]); | |
652 | /* | |
653 | * metadata blocks and data blocks are allocated. | |
654 | */ | |
655 | for (n = 1; n <= indirect_blks; n++) { | |
656 | /* | |
657 | * Get buffer_head for parent block, zero it out | |
658 | * and set the pointer to new one, then send | |
659 | * parent to disk. | |
660 | */ | |
661 | bh = sb_getblk(inode->i_sb, new_blocks[n-1]); | |
662 | branch[n].bh = bh; | |
663 | lock_buffer(bh); | |
664 | BUFFER_TRACE(bh, "call get_create_access"); | |
617ba13b | 665 | err = ext4_journal_get_create_access(handle, bh); |
ac27a0ec DK |
666 | if (err) { |
667 | unlock_buffer(bh); | |
668 | brelse(bh); | |
669 | goto failed; | |
670 | } | |
671 | ||
672 | memset(bh->b_data, 0, blocksize); | |
673 | branch[n].p = (__le32 *) bh->b_data + offsets[n]; | |
674 | branch[n].key = cpu_to_le32(new_blocks[n]); | |
675 | *branch[n].p = branch[n].key; | |
676 | if ( n == indirect_blks) { | |
677 | current_block = new_blocks[n]; | |
678 | /* | |
679 | * End of chain, update the last new metablock of | |
680 | * the chain to point to the new allocated | |
681 | * data blocks numbers | |
682 | */ | |
683 | for (i=1; i < num; i++) | |
684 | *(branch[n].p + i) = cpu_to_le32(++current_block); | |
685 | } | |
686 | BUFFER_TRACE(bh, "marking uptodate"); | |
687 | set_buffer_uptodate(bh); | |
688 | unlock_buffer(bh); | |
689 | ||
617ba13b MC |
690 | BUFFER_TRACE(bh, "call ext4_journal_dirty_metadata"); |
691 | err = ext4_journal_dirty_metadata(handle, bh); | |
ac27a0ec DK |
692 | if (err) |
693 | goto failed; | |
694 | } | |
695 | *blks = num; | |
696 | return err; | |
697 | failed: | |
698 | /* Allocation failed, free what we already allocated */ | |
699 | for (i = 1; i <= n ; i++) { | |
dab291af | 700 | BUFFER_TRACE(branch[i].bh, "call jbd2_journal_forget"); |
617ba13b | 701 | ext4_journal_forget(handle, branch[i].bh); |
ac27a0ec DK |
702 | } |
703 | for (i = 0; i <indirect_blks; i++) | |
c9de560d | 704 | ext4_free_blocks(handle, inode, new_blocks[i], 1, 0); |
ac27a0ec | 705 | |
c9de560d | 706 | ext4_free_blocks(handle, inode, new_blocks[i], num, 0); |
ac27a0ec DK |
707 | |
708 | return err; | |
709 | } | |
710 | ||
711 | /** | |
617ba13b | 712 | * ext4_splice_branch - splice the allocated branch onto inode. |
ac27a0ec DK |
713 | * @inode: owner |
714 | * @block: (logical) number of block we are adding | |
715 | * @chain: chain of indirect blocks (with a missing link - see | |
617ba13b | 716 | * ext4_alloc_branch) |
ac27a0ec DK |
717 | * @where: location of missing link |
718 | * @num: number of indirect blocks we are adding | |
719 | * @blks: number of direct blocks we are adding | |
720 | * | |
721 | * This function fills the missing link and does all housekeeping needed in | |
722 | * inode (->i_blocks, etc.). In case of success we end up with the full | |
723 | * chain to new block and return 0. | |
724 | */ | |
617ba13b | 725 | static int ext4_splice_branch(handle_t *handle, struct inode *inode, |
725d26d3 | 726 | ext4_lblk_t block, Indirect *where, int num, int blks) |
ac27a0ec DK |
727 | { |
728 | int i; | |
729 | int err = 0; | |
617ba13b MC |
730 | struct ext4_block_alloc_info *block_i; |
731 | ext4_fsblk_t current_block; | |
ac27a0ec | 732 | |
617ba13b | 733 | block_i = EXT4_I(inode)->i_block_alloc_info; |
ac27a0ec DK |
734 | /* |
735 | * If we're splicing into a [td]indirect block (as opposed to the | |
736 | * inode) then we need to get write access to the [td]indirect block | |
737 | * before the splice. | |
738 | */ | |
739 | if (where->bh) { | |
740 | BUFFER_TRACE(where->bh, "get_write_access"); | |
617ba13b | 741 | err = ext4_journal_get_write_access(handle, where->bh); |
ac27a0ec DK |
742 | if (err) |
743 | goto err_out; | |
744 | } | |
745 | /* That's it */ | |
746 | ||
747 | *where->p = where->key; | |
748 | ||
749 | /* | |
750 | * Update the host buffer_head or inode to point to more just allocated | |
751 | * direct blocks blocks | |
752 | */ | |
753 | if (num == 0 && blks > 1) { | |
754 | current_block = le32_to_cpu(where->key) + 1; | |
755 | for (i = 1; i < blks; i++) | |
756 | *(where->p + i ) = cpu_to_le32(current_block++); | |
757 | } | |
758 | ||
759 | /* | |
760 | * update the most recently allocated logical & physical block | |
761 | * in i_block_alloc_info, to assist find the proper goal block for next | |
762 | * allocation | |
763 | */ | |
764 | if (block_i) { | |
765 | block_i->last_alloc_logical_block = block + blks - 1; | |
766 | block_i->last_alloc_physical_block = | |
767 | le32_to_cpu(where[num].key) + blks - 1; | |
768 | } | |
769 | ||
770 | /* We are done with atomic stuff, now do the rest of housekeeping */ | |
771 | ||
ef7f3835 | 772 | inode->i_ctime = ext4_current_time(inode); |
617ba13b | 773 | ext4_mark_inode_dirty(handle, inode); |
ac27a0ec DK |
774 | |
775 | /* had we spliced it onto indirect block? */ | |
776 | if (where->bh) { | |
777 | /* | |
778 | * If we spliced it onto an indirect block, we haven't | |
779 | * altered the inode. Note however that if it is being spliced | |
780 | * onto an indirect block at the very end of the file (the | |
781 | * file is growing) then we *will* alter the inode to reflect | |
782 | * the new i_size. But that is not done here - it is done in | |
617ba13b | 783 | * generic_commit_write->__mark_inode_dirty->ext4_dirty_inode. |
ac27a0ec DK |
784 | */ |
785 | jbd_debug(5, "splicing indirect only\n"); | |
617ba13b MC |
786 | BUFFER_TRACE(where->bh, "call ext4_journal_dirty_metadata"); |
787 | err = ext4_journal_dirty_metadata(handle, where->bh); | |
ac27a0ec DK |
788 | if (err) |
789 | goto err_out; | |
790 | } else { | |
791 | /* | |
792 | * OK, we spliced it into the inode itself on a direct block. | |
793 | * Inode was dirtied above. | |
794 | */ | |
795 | jbd_debug(5, "splicing direct\n"); | |
796 | } | |
797 | return err; | |
798 | ||
799 | err_out: | |
800 | for (i = 1; i <= num; i++) { | |
dab291af | 801 | BUFFER_TRACE(where[i].bh, "call jbd2_journal_forget"); |
617ba13b | 802 | ext4_journal_forget(handle, where[i].bh); |
c9de560d AT |
803 | ext4_free_blocks(handle, inode, |
804 | le32_to_cpu(where[i-1].key), 1, 0); | |
ac27a0ec | 805 | } |
c9de560d | 806 | ext4_free_blocks(handle, inode, le32_to_cpu(where[num].key), blks, 0); |
ac27a0ec DK |
807 | |
808 | return err; | |
809 | } | |
810 | ||
811 | /* | |
812 | * Allocation strategy is simple: if we have to allocate something, we will | |
813 | * have to go the whole way to leaf. So let's do it before attaching anything | |
814 | * to tree, set linkage between the newborn blocks, write them if sync is | |
815 | * required, recheck the path, free and repeat if check fails, otherwise | |
816 | * set the last missing link (that will protect us from any truncate-generated | |
817 | * removals - all blocks on the path are immune now) and possibly force the | |
818 | * write on the parent block. | |
819 | * That has a nice additional property: no special recovery from the failed | |
820 | * allocations is needed - we simply release blocks and do not touch anything | |
821 | * reachable from inode. | |
822 | * | |
823 | * `handle' can be NULL if create == 0. | |
824 | * | |
ac27a0ec DK |
825 | * return > 0, # of blocks mapped or allocated. |
826 | * return = 0, if plain lookup failed. | |
827 | * return < 0, error case. | |
c278bfec AK |
828 | * |
829 | * | |
830 | * Need to be called with | |
0e855ac8 AK |
831 | * down_read(&EXT4_I(inode)->i_data_sem) if not allocating file system block |
832 | * (ie, create is zero). Otherwise down_write(&EXT4_I(inode)->i_data_sem) | |
ac27a0ec | 833 | */ |
617ba13b | 834 | int ext4_get_blocks_handle(handle_t *handle, struct inode *inode, |
725d26d3 | 835 | ext4_lblk_t iblock, unsigned long maxblocks, |
ac27a0ec DK |
836 | struct buffer_head *bh_result, |
837 | int create, int extend_disksize) | |
838 | { | |
839 | int err = -EIO; | |
725d26d3 | 840 | ext4_lblk_t offsets[4]; |
ac27a0ec DK |
841 | Indirect chain[4]; |
842 | Indirect *partial; | |
617ba13b | 843 | ext4_fsblk_t goal; |
ac27a0ec DK |
844 | int indirect_blks; |
845 | int blocks_to_boundary = 0; | |
846 | int depth; | |
617ba13b | 847 | struct ext4_inode_info *ei = EXT4_I(inode); |
ac27a0ec | 848 | int count = 0; |
617ba13b | 849 | ext4_fsblk_t first_block = 0; |
61628a3f | 850 | loff_t disksize; |
ac27a0ec DK |
851 | |
852 | ||
a86c6181 | 853 | J_ASSERT(!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)); |
ac27a0ec | 854 | J_ASSERT(handle != NULL || create == 0); |
725d26d3 AK |
855 | depth = ext4_block_to_path(inode, iblock, offsets, |
856 | &blocks_to_boundary); | |
ac27a0ec DK |
857 | |
858 | if (depth == 0) | |
859 | goto out; | |
860 | ||
617ba13b | 861 | partial = ext4_get_branch(inode, depth, offsets, chain, &err); |
ac27a0ec DK |
862 | |
863 | /* Simplest case - block found, no allocation needed */ | |
864 | if (!partial) { | |
865 | first_block = le32_to_cpu(chain[depth - 1].key); | |
866 | clear_buffer_new(bh_result); | |
867 | count++; | |
868 | /*map more blocks*/ | |
869 | while (count < maxblocks && count <= blocks_to_boundary) { | |
617ba13b | 870 | ext4_fsblk_t blk; |
ac27a0ec | 871 | |
ac27a0ec DK |
872 | blk = le32_to_cpu(*(chain[depth-1].p + count)); |
873 | ||
874 | if (blk == first_block + count) | |
875 | count++; | |
876 | else | |
877 | break; | |
878 | } | |
c278bfec | 879 | goto got_it; |
ac27a0ec DK |
880 | } |
881 | ||
882 | /* Next simple case - plain lookup or failed read of indirect block */ | |
883 | if (!create || err == -EIO) | |
884 | goto cleanup; | |
885 | ||
ac27a0ec DK |
886 | /* |
887 | * Okay, we need to do block allocation. Lazily initialize the block | |
888 | * allocation info here if necessary | |
889 | */ | |
890 | if (S_ISREG(inode->i_mode) && (!ei->i_block_alloc_info)) | |
617ba13b | 891 | ext4_init_block_alloc_info(inode); |
ac27a0ec | 892 | |
fb01bfda | 893 | goal = ext4_find_goal(inode, iblock, partial); |
ac27a0ec DK |
894 | |
895 | /* the number of blocks need to allocate for [d,t]indirect blocks */ | |
896 | indirect_blks = (chain + depth) - partial - 1; | |
897 | ||
898 | /* | |
899 | * Next look up the indirect map to count the totoal number of | |
900 | * direct blocks to allocate for this branch. | |
901 | */ | |
617ba13b | 902 | count = ext4_blks_to_allocate(partial, indirect_blks, |
ac27a0ec DK |
903 | maxblocks, blocks_to_boundary); |
904 | /* | |
617ba13b | 905 | * Block out ext4_truncate while we alter the tree |
ac27a0ec | 906 | */ |
7061eba7 AK |
907 | err = ext4_alloc_branch(handle, inode, iblock, indirect_blks, |
908 | &count, goal, | |
909 | offsets + (partial - chain), partial); | |
ac27a0ec DK |
910 | |
911 | /* | |
617ba13b | 912 | * The ext4_splice_branch call will free and forget any buffers |
ac27a0ec DK |
913 | * on the new chain if there is a failure, but that risks using |
914 | * up transaction credits, especially for bitmaps where the | |
915 | * credits cannot be returned. Can we handle this somehow? We | |
916 | * may need to return -EAGAIN upwards in the worst case. --sct | |
917 | */ | |
918 | if (!err) | |
617ba13b | 919 | err = ext4_splice_branch(handle, inode, iblock, |
ac27a0ec DK |
920 | partial, indirect_blks, count); |
921 | /* | |
0e855ac8 | 922 | * i_disksize growing is protected by i_data_sem. Don't forget to |
ac27a0ec | 923 | * protect it if you're about to implement concurrent |
617ba13b | 924 | * ext4_get_block() -bzzz |
ac27a0ec | 925 | */ |
61628a3f MC |
926 | if (!err && extend_disksize) { |
927 | disksize = ((loff_t) iblock + count) << inode->i_blkbits; | |
928 | if (disksize > i_size_read(inode)) | |
929 | disksize = i_size_read(inode); | |
930 | if (disksize > ei->i_disksize) | |
931 | ei->i_disksize = disksize; | |
932 | } | |
ac27a0ec DK |
933 | if (err) |
934 | goto cleanup; | |
935 | ||
936 | set_buffer_new(bh_result); | |
937 | got_it: | |
938 | map_bh(bh_result, inode->i_sb, le32_to_cpu(chain[depth-1].key)); | |
939 | if (count > blocks_to_boundary) | |
940 | set_buffer_boundary(bh_result); | |
941 | err = count; | |
942 | /* Clean up and exit */ | |
943 | partial = chain + depth - 1; /* the whole chain */ | |
944 | cleanup: | |
945 | while (partial > chain) { | |
946 | BUFFER_TRACE(partial->bh, "call brelse"); | |
947 | brelse(partial->bh); | |
948 | partial--; | |
949 | } | |
950 | BUFFER_TRACE(bh_result, "returned"); | |
951 | out: | |
952 | return err; | |
953 | } | |
954 | ||
7fb5409d JK |
955 | /* Maximum number of blocks we map for direct IO at once. */ |
956 | #define DIO_MAX_BLOCKS 4096 | |
957 | /* | |
958 | * Number of credits we need for writing DIO_MAX_BLOCKS: | |
959 | * We need sb + group descriptor + bitmap + inode -> 4 | |
960 | * For B blocks with A block pointers per block we need: | |
961 | * 1 (triple ind.) + (B/A/A + 2) (doubly ind.) + (B/A + 2) (indirect). | |
962 | * If we plug in 4096 for B and 256 for A (for 1KB block size), we get 25. | |
963 | */ | |
964 | #define DIO_CREDITS 25 | |
ac27a0ec | 965 | |
f5ab0d1f MC |
966 | |
967 | /* | |
968 | * | |
969 | * | |
970 | * ext4_ext4 get_block() wrapper function | |
971 | * It will do a look up first, and returns if the blocks already mapped. | |
972 | * Otherwise it takes the write lock of the i_data_sem and allocate blocks | |
973 | * and store the allocated blocks in the result buffer head and mark it | |
974 | * mapped. | |
975 | * | |
976 | * If file type is extents based, it will call ext4_ext_get_blocks(), | |
977 | * Otherwise, call with ext4_get_blocks_handle() to handle indirect mapping | |
978 | * based files | |
979 | * | |
980 | * On success, it returns the number of blocks being mapped or allocate. | |
981 | * if create==0 and the blocks are pre-allocated and uninitialized block, | |
982 | * the result buffer head is unmapped. If the create ==1, it will make sure | |
983 | * the buffer head is mapped. | |
984 | * | |
985 | * It returns 0 if plain look up failed (blocks have not been allocated), in | |
986 | * that casem, buffer head is unmapped | |
987 | * | |
988 | * It returns the error in case of allocation failure. | |
989 | */ | |
0e855ac8 AK |
990 | int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode, sector_t block, |
991 | unsigned long max_blocks, struct buffer_head *bh, | |
d2a17637 | 992 | int create, int extend_disksize, int flag) |
0e855ac8 AK |
993 | { |
994 | int retval; | |
f5ab0d1f MC |
995 | |
996 | clear_buffer_mapped(bh); | |
997 | ||
4df3d265 AK |
998 | /* |
999 | * Try to see if we can get the block without requesting | |
1000 | * for new file system block. | |
1001 | */ | |
1002 | down_read((&EXT4_I(inode)->i_data_sem)); | |
1003 | if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) { | |
1004 | retval = ext4_ext_get_blocks(handle, inode, block, max_blocks, | |
1005 | bh, 0, 0); | |
0e855ac8 | 1006 | } else { |
4df3d265 AK |
1007 | retval = ext4_get_blocks_handle(handle, |
1008 | inode, block, max_blocks, bh, 0, 0); | |
0e855ac8 | 1009 | } |
4df3d265 | 1010 | up_read((&EXT4_I(inode)->i_data_sem)); |
f5ab0d1f MC |
1011 | |
1012 | /* If it is only a block(s) look up */ | |
1013 | if (!create) | |
1014 | return retval; | |
1015 | ||
1016 | /* | |
1017 | * Returns if the blocks have already allocated | |
1018 | * | |
1019 | * Note that if blocks have been preallocated | |
1020 | * ext4_ext_get_block() returns th create = 0 | |
1021 | * with buffer head unmapped. | |
1022 | */ | |
1023 | if (retval > 0 && buffer_mapped(bh)) | |
4df3d265 AK |
1024 | return retval; |
1025 | ||
1026 | /* | |
f5ab0d1f MC |
1027 | * New blocks allocate and/or writing to uninitialized extent |
1028 | * will possibly result in updating i_data, so we take | |
1029 | * the write lock of i_data_sem, and call get_blocks() | |
1030 | * with create == 1 flag. | |
4df3d265 AK |
1031 | */ |
1032 | down_write((&EXT4_I(inode)->i_data_sem)); | |
d2a17637 MC |
1033 | |
1034 | /* | |
1035 | * if the caller is from delayed allocation writeout path | |
1036 | * we have already reserved fs blocks for allocation | |
1037 | * let the underlying get_block() function know to | |
1038 | * avoid double accounting | |
1039 | */ | |
1040 | if (flag) | |
1041 | EXT4_I(inode)->i_delalloc_reserved_flag = 1; | |
4df3d265 AK |
1042 | /* |
1043 | * We need to check for EXT4 here because migrate | |
1044 | * could have changed the inode type in between | |
1045 | */ | |
0e855ac8 AK |
1046 | if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) { |
1047 | retval = ext4_ext_get_blocks(handle, inode, block, max_blocks, | |
1048 | bh, create, extend_disksize); | |
1049 | } else { | |
1050 | retval = ext4_get_blocks_handle(handle, inode, block, | |
1051 | max_blocks, bh, create, extend_disksize); | |
267e4db9 AK |
1052 | |
1053 | if (retval > 0 && buffer_new(bh)) { | |
1054 | /* | |
1055 | * We allocated new blocks which will result in | |
1056 | * i_data's format changing. Force the migrate | |
1057 | * to fail by clearing migrate flags | |
1058 | */ | |
1059 | EXT4_I(inode)->i_flags = EXT4_I(inode)->i_flags & | |
1060 | ~EXT4_EXT_MIGRATE; | |
1061 | } | |
0e855ac8 | 1062 | } |
d2a17637 MC |
1063 | |
1064 | if (flag) { | |
1065 | EXT4_I(inode)->i_delalloc_reserved_flag = 0; | |
1066 | /* | |
1067 | * Update reserved blocks/metadata blocks | |
1068 | * after successful block allocation | |
1069 | * which were deferred till now | |
1070 | */ | |
1071 | if ((retval > 0) && buffer_delay(bh)) | |
1072 | ext4_da_release_space(inode, retval, 0); | |
1073 | } | |
1074 | ||
4df3d265 | 1075 | up_write((&EXT4_I(inode)->i_data_sem)); |
0e855ac8 AK |
1076 | return retval; |
1077 | } | |
1078 | ||
617ba13b | 1079 | static int ext4_get_block(struct inode *inode, sector_t iblock, |
ac27a0ec DK |
1080 | struct buffer_head *bh_result, int create) |
1081 | { | |
3e4fdaf8 | 1082 | handle_t *handle = ext4_journal_current_handle(); |
7fb5409d | 1083 | int ret = 0, started = 0; |
ac27a0ec DK |
1084 | unsigned max_blocks = bh_result->b_size >> inode->i_blkbits; |
1085 | ||
7fb5409d JK |
1086 | if (create && !handle) { |
1087 | /* Direct IO write... */ | |
1088 | if (max_blocks > DIO_MAX_BLOCKS) | |
1089 | max_blocks = DIO_MAX_BLOCKS; | |
1090 | handle = ext4_journal_start(inode, DIO_CREDITS + | |
1091 | 2 * EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb)); | |
1092 | if (IS_ERR(handle)) { | |
ac27a0ec | 1093 | ret = PTR_ERR(handle); |
7fb5409d | 1094 | goto out; |
ac27a0ec | 1095 | } |
7fb5409d | 1096 | started = 1; |
ac27a0ec DK |
1097 | } |
1098 | ||
7fb5409d | 1099 | ret = ext4_get_blocks_wrap(handle, inode, iblock, |
d2a17637 | 1100 | max_blocks, bh_result, create, 0, 0); |
7fb5409d JK |
1101 | if (ret > 0) { |
1102 | bh_result->b_size = (ret << inode->i_blkbits); | |
1103 | ret = 0; | |
ac27a0ec | 1104 | } |
7fb5409d JK |
1105 | if (started) |
1106 | ext4_journal_stop(handle); | |
1107 | out: | |
ac27a0ec DK |
1108 | return ret; |
1109 | } | |
1110 | ||
1111 | /* | |
1112 | * `handle' can be NULL if create is zero | |
1113 | */ | |
617ba13b | 1114 | struct buffer_head *ext4_getblk(handle_t *handle, struct inode *inode, |
725d26d3 | 1115 | ext4_lblk_t block, int create, int *errp) |
ac27a0ec DK |
1116 | { |
1117 | struct buffer_head dummy; | |
1118 | int fatal = 0, err; | |
1119 | ||
1120 | J_ASSERT(handle != NULL || create == 0); | |
1121 | ||
1122 | dummy.b_state = 0; | |
1123 | dummy.b_blocknr = -1000; | |
1124 | buffer_trace_init(&dummy.b_history); | |
a86c6181 | 1125 | err = ext4_get_blocks_wrap(handle, inode, block, 1, |
d2a17637 | 1126 | &dummy, create, 1, 0); |
ac27a0ec | 1127 | /* |
617ba13b | 1128 | * ext4_get_blocks_handle() returns number of blocks |
ac27a0ec DK |
1129 | * mapped. 0 in case of a HOLE. |
1130 | */ | |
1131 | if (err > 0) { | |
1132 | if (err > 1) | |
1133 | WARN_ON(1); | |
1134 | err = 0; | |
1135 | } | |
1136 | *errp = err; | |
1137 | if (!err && buffer_mapped(&dummy)) { | |
1138 | struct buffer_head *bh; | |
1139 | bh = sb_getblk(inode->i_sb, dummy.b_blocknr); | |
1140 | if (!bh) { | |
1141 | *errp = -EIO; | |
1142 | goto err; | |
1143 | } | |
1144 | if (buffer_new(&dummy)) { | |
1145 | J_ASSERT(create != 0); | |
ac39849d | 1146 | J_ASSERT(handle != NULL); |
ac27a0ec DK |
1147 | |
1148 | /* | |
1149 | * Now that we do not always journal data, we should | |
1150 | * keep in mind whether this should always journal the | |
1151 | * new buffer as metadata. For now, regular file | |
617ba13b | 1152 | * writes use ext4_get_block instead, so it's not a |
ac27a0ec DK |
1153 | * problem. |
1154 | */ | |
1155 | lock_buffer(bh); | |
1156 | BUFFER_TRACE(bh, "call get_create_access"); | |
617ba13b | 1157 | fatal = ext4_journal_get_create_access(handle, bh); |
ac27a0ec DK |
1158 | if (!fatal && !buffer_uptodate(bh)) { |
1159 | memset(bh->b_data,0,inode->i_sb->s_blocksize); | |
1160 | set_buffer_uptodate(bh); | |
1161 | } | |
1162 | unlock_buffer(bh); | |
617ba13b MC |
1163 | BUFFER_TRACE(bh, "call ext4_journal_dirty_metadata"); |
1164 | err = ext4_journal_dirty_metadata(handle, bh); | |
ac27a0ec DK |
1165 | if (!fatal) |
1166 | fatal = err; | |
1167 | } else { | |
1168 | BUFFER_TRACE(bh, "not a new buffer"); | |
1169 | } | |
1170 | if (fatal) { | |
1171 | *errp = fatal; | |
1172 | brelse(bh); | |
1173 | bh = NULL; | |
1174 | } | |
1175 | return bh; | |
1176 | } | |
1177 | err: | |
1178 | return NULL; | |
1179 | } | |
1180 | ||
617ba13b | 1181 | struct buffer_head *ext4_bread(handle_t *handle, struct inode *inode, |
725d26d3 | 1182 | ext4_lblk_t block, int create, int *err) |
ac27a0ec DK |
1183 | { |
1184 | struct buffer_head * bh; | |
1185 | ||
617ba13b | 1186 | bh = ext4_getblk(handle, inode, block, create, err); |
ac27a0ec DK |
1187 | if (!bh) |
1188 | return bh; | |
1189 | if (buffer_uptodate(bh)) | |
1190 | return bh; | |
1191 | ll_rw_block(READ_META, 1, &bh); | |
1192 | wait_on_buffer(bh); | |
1193 | if (buffer_uptodate(bh)) | |
1194 | return bh; | |
1195 | put_bh(bh); | |
1196 | *err = -EIO; | |
1197 | return NULL; | |
1198 | } | |
1199 | ||
1200 | static int walk_page_buffers( handle_t *handle, | |
1201 | struct buffer_head *head, | |
1202 | unsigned from, | |
1203 | unsigned to, | |
1204 | int *partial, | |
1205 | int (*fn)( handle_t *handle, | |
1206 | struct buffer_head *bh)) | |
1207 | { | |
1208 | struct buffer_head *bh; | |
1209 | unsigned block_start, block_end; | |
1210 | unsigned blocksize = head->b_size; | |
1211 | int err, ret = 0; | |
1212 | struct buffer_head *next; | |
1213 | ||
1214 | for ( bh = head, block_start = 0; | |
1215 | ret == 0 && (bh != head || !block_start); | |
1216 | block_start = block_end, bh = next) | |
1217 | { | |
1218 | next = bh->b_this_page; | |
1219 | block_end = block_start + blocksize; | |
1220 | if (block_end <= from || block_start >= to) { | |
1221 | if (partial && !buffer_uptodate(bh)) | |
1222 | *partial = 1; | |
1223 | continue; | |
1224 | } | |
1225 | err = (*fn)(handle, bh); | |
1226 | if (!ret) | |
1227 | ret = err; | |
1228 | } | |
1229 | return ret; | |
1230 | } | |
1231 | ||
1232 | /* | |
1233 | * To preserve ordering, it is essential that the hole instantiation and | |
1234 | * the data write be encapsulated in a single transaction. We cannot | |
617ba13b | 1235 | * close off a transaction and start a new one between the ext4_get_block() |
dab291af | 1236 | * and the commit_write(). So doing the jbd2_journal_start at the start of |
ac27a0ec DK |
1237 | * prepare_write() is the right place. |
1238 | * | |
617ba13b MC |
1239 | * Also, this function can nest inside ext4_writepage() -> |
1240 | * block_write_full_page(). In that case, we *know* that ext4_writepage() | |
ac27a0ec DK |
1241 | * has generated enough buffer credits to do the whole page. So we won't |
1242 | * block on the journal in that case, which is good, because the caller may | |
1243 | * be PF_MEMALLOC. | |
1244 | * | |
617ba13b | 1245 | * By accident, ext4 can be reentered when a transaction is open via |
ac27a0ec DK |
1246 | * quota file writes. If we were to commit the transaction while thus |
1247 | * reentered, there can be a deadlock - we would be holding a quota | |
1248 | * lock, and the commit would never complete if another thread had a | |
1249 | * transaction open and was blocking on the quota lock - a ranking | |
1250 | * violation. | |
1251 | * | |
dab291af | 1252 | * So what we do is to rely on the fact that jbd2_journal_stop/journal_start |
ac27a0ec DK |
1253 | * will _not_ run commit under these circumstances because handle->h_ref |
1254 | * is elevated. We'll still have enough credits for the tiny quotafile | |
1255 | * write. | |
1256 | */ | |
1257 | static int do_journal_get_write_access(handle_t *handle, | |
1258 | struct buffer_head *bh) | |
1259 | { | |
1260 | if (!buffer_mapped(bh) || buffer_freed(bh)) | |
1261 | return 0; | |
617ba13b | 1262 | return ext4_journal_get_write_access(handle, bh); |
ac27a0ec DK |
1263 | } |
1264 | ||
bfc1af65 NP |
1265 | static int ext4_write_begin(struct file *file, struct address_space *mapping, |
1266 | loff_t pos, unsigned len, unsigned flags, | |
1267 | struct page **pagep, void **fsdata) | |
ac27a0ec | 1268 | { |
bfc1af65 | 1269 | struct inode *inode = mapping->host; |
7479d2b9 | 1270 | int ret, needed_blocks = ext4_writepage_trans_blocks(inode); |
ac27a0ec DK |
1271 | handle_t *handle; |
1272 | int retries = 0; | |
bfc1af65 NP |
1273 | struct page *page; |
1274 | pgoff_t index; | |
1275 | unsigned from, to; | |
1276 | ||
1277 | index = pos >> PAGE_CACHE_SHIFT; | |
1278 | from = pos & (PAGE_CACHE_SIZE - 1); | |
1279 | to = from + len; | |
ac27a0ec DK |
1280 | |
1281 | retry: | |
bfc1af65 NP |
1282 | handle = ext4_journal_start(inode, needed_blocks); |
1283 | if (IS_ERR(handle)) { | |
bfc1af65 NP |
1284 | ret = PTR_ERR(handle); |
1285 | goto out; | |
7479d2b9 | 1286 | } |
ac27a0ec | 1287 | |
cf108bca JK |
1288 | page = __grab_cache_page(mapping, index); |
1289 | if (!page) { | |
1290 | ext4_journal_stop(handle); | |
1291 | ret = -ENOMEM; | |
1292 | goto out; | |
1293 | } | |
1294 | *pagep = page; | |
1295 | ||
bfc1af65 NP |
1296 | ret = block_write_begin(file, mapping, pos, len, flags, pagep, fsdata, |
1297 | ext4_get_block); | |
1298 | ||
1299 | if (!ret && ext4_should_journal_data(inode)) { | |
ac27a0ec DK |
1300 | ret = walk_page_buffers(handle, page_buffers(page), |
1301 | from, to, NULL, do_journal_get_write_access); | |
1302 | } | |
bfc1af65 NP |
1303 | |
1304 | if (ret) { | |
bfc1af65 | 1305 | unlock_page(page); |
cf108bca | 1306 | ext4_journal_stop(handle); |
bfc1af65 NP |
1307 | page_cache_release(page); |
1308 | } | |
1309 | ||
617ba13b | 1310 | if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) |
ac27a0ec | 1311 | goto retry; |
7479d2b9 | 1312 | out: |
ac27a0ec DK |
1313 | return ret; |
1314 | } | |
1315 | ||
bfc1af65 NP |
1316 | /* For write_end() in data=journal mode */ |
1317 | static int write_end_fn(handle_t *handle, struct buffer_head *bh) | |
ac27a0ec DK |
1318 | { |
1319 | if (!buffer_mapped(bh) || buffer_freed(bh)) | |
1320 | return 0; | |
1321 | set_buffer_uptodate(bh); | |
617ba13b | 1322 | return ext4_journal_dirty_metadata(handle, bh); |
ac27a0ec DK |
1323 | } |
1324 | ||
1325 | /* | |
1326 | * We need to pick up the new inode size which generic_commit_write gave us | |
1327 | * `file' can be NULL - eg, when called from page_symlink(). | |
1328 | * | |
617ba13b | 1329 | * ext4 never places buffers on inode->i_mapping->private_list. metadata |
ac27a0ec DK |
1330 | * buffers are managed internally. |
1331 | */ | |
bfc1af65 NP |
1332 | static int ext4_ordered_write_end(struct file *file, |
1333 | struct address_space *mapping, | |
1334 | loff_t pos, unsigned len, unsigned copied, | |
1335 | struct page *page, void *fsdata) | |
ac27a0ec | 1336 | { |
617ba13b | 1337 | handle_t *handle = ext4_journal_current_handle(); |
cf108bca | 1338 | struct inode *inode = mapping->host; |
bfc1af65 | 1339 | unsigned from, to; |
ac27a0ec DK |
1340 | int ret = 0, ret2; |
1341 | ||
bfc1af65 NP |
1342 | from = pos & (PAGE_CACHE_SIZE - 1); |
1343 | to = from + len; | |
1344 | ||
678aaf48 | 1345 | ret = ext4_jbd2_file_inode(handle, inode); |
ac27a0ec DK |
1346 | |
1347 | if (ret == 0) { | |
1348 | /* | |
bfc1af65 | 1349 | * generic_write_end() will run mark_inode_dirty() if i_size |
ac27a0ec DK |
1350 | * changes. So let's piggyback the i_disksize mark_inode_dirty |
1351 | * into that. | |
1352 | */ | |
1353 | loff_t new_i_size; | |
1354 | ||
bfc1af65 | 1355 | new_i_size = pos + copied; |
617ba13b MC |
1356 | if (new_i_size > EXT4_I(inode)->i_disksize) |
1357 | EXT4_I(inode)->i_disksize = new_i_size; | |
cf108bca | 1358 | ret2 = generic_write_end(file, mapping, pos, len, copied, |
bfc1af65 | 1359 | page, fsdata); |
f8a87d89 RK |
1360 | copied = ret2; |
1361 | if (ret2 < 0) | |
1362 | ret = ret2; | |
ac27a0ec | 1363 | } |
617ba13b | 1364 | ret2 = ext4_journal_stop(handle); |
ac27a0ec DK |
1365 | if (!ret) |
1366 | ret = ret2; | |
bfc1af65 NP |
1367 | |
1368 | return ret ? ret : copied; | |
ac27a0ec DK |
1369 | } |
1370 | ||
bfc1af65 NP |
1371 | static int ext4_writeback_write_end(struct file *file, |
1372 | struct address_space *mapping, | |
1373 | loff_t pos, unsigned len, unsigned copied, | |
1374 | struct page *page, void *fsdata) | |
ac27a0ec | 1375 | { |
617ba13b | 1376 | handle_t *handle = ext4_journal_current_handle(); |
cf108bca | 1377 | struct inode *inode = mapping->host; |
ac27a0ec DK |
1378 | int ret = 0, ret2; |
1379 | loff_t new_i_size; | |
1380 | ||
bfc1af65 | 1381 | new_i_size = pos + copied; |
617ba13b MC |
1382 | if (new_i_size > EXT4_I(inode)->i_disksize) |
1383 | EXT4_I(inode)->i_disksize = new_i_size; | |
ac27a0ec | 1384 | |
cf108bca | 1385 | ret2 = generic_write_end(file, mapping, pos, len, copied, |
bfc1af65 | 1386 | page, fsdata); |
f8a87d89 RK |
1387 | copied = ret2; |
1388 | if (ret2 < 0) | |
1389 | ret = ret2; | |
ac27a0ec | 1390 | |
617ba13b | 1391 | ret2 = ext4_journal_stop(handle); |
ac27a0ec DK |
1392 | if (!ret) |
1393 | ret = ret2; | |
bfc1af65 NP |
1394 | |
1395 | return ret ? ret : copied; | |
ac27a0ec DK |
1396 | } |
1397 | ||
bfc1af65 NP |
1398 | static int ext4_journalled_write_end(struct file *file, |
1399 | struct address_space *mapping, | |
1400 | loff_t pos, unsigned len, unsigned copied, | |
1401 | struct page *page, void *fsdata) | |
ac27a0ec | 1402 | { |
617ba13b | 1403 | handle_t *handle = ext4_journal_current_handle(); |
bfc1af65 | 1404 | struct inode *inode = mapping->host; |
ac27a0ec DK |
1405 | int ret = 0, ret2; |
1406 | int partial = 0; | |
bfc1af65 | 1407 | unsigned from, to; |
ac27a0ec | 1408 | |
bfc1af65 NP |
1409 | from = pos & (PAGE_CACHE_SIZE - 1); |
1410 | to = from + len; | |
1411 | ||
1412 | if (copied < len) { | |
1413 | if (!PageUptodate(page)) | |
1414 | copied = 0; | |
1415 | page_zero_new_buffers(page, from+copied, to); | |
1416 | } | |
ac27a0ec DK |
1417 | |
1418 | ret = walk_page_buffers(handle, page_buffers(page), from, | |
bfc1af65 | 1419 | to, &partial, write_end_fn); |
ac27a0ec DK |
1420 | if (!partial) |
1421 | SetPageUptodate(page); | |
bfc1af65 NP |
1422 | if (pos+copied > inode->i_size) |
1423 | i_size_write(inode, pos+copied); | |
617ba13b MC |
1424 | EXT4_I(inode)->i_state |= EXT4_STATE_JDATA; |
1425 | if (inode->i_size > EXT4_I(inode)->i_disksize) { | |
1426 | EXT4_I(inode)->i_disksize = inode->i_size; | |
1427 | ret2 = ext4_mark_inode_dirty(handle, inode); | |
ac27a0ec DK |
1428 | if (!ret) |
1429 | ret = ret2; | |
1430 | } | |
bfc1af65 | 1431 | |
cf108bca | 1432 | unlock_page(page); |
617ba13b | 1433 | ret2 = ext4_journal_stop(handle); |
ac27a0ec DK |
1434 | if (!ret) |
1435 | ret = ret2; | |
bfc1af65 NP |
1436 | page_cache_release(page); |
1437 | ||
1438 | return ret ? ret : copied; | |
ac27a0ec | 1439 | } |
d2a17637 MC |
1440 | /* |
1441 | * Calculate the number of metadata blocks need to reserve | |
1442 | * to allocate @blocks for non extent file based file | |
1443 | */ | |
1444 | static int ext4_indirect_calc_metadata_amount(struct inode *inode, int blocks) | |
1445 | { | |
1446 | int icap = EXT4_ADDR_PER_BLOCK(inode->i_sb); | |
1447 | int ind_blks, dind_blks, tind_blks; | |
1448 | ||
1449 | /* number of new indirect blocks needed */ | |
1450 | ind_blks = (blocks + icap - 1) / icap; | |
1451 | ||
1452 | dind_blks = (ind_blks + icap - 1) / icap; | |
1453 | ||
1454 | tind_blks = 1; | |
1455 | ||
1456 | return ind_blks + dind_blks + tind_blks; | |
1457 | } | |
1458 | ||
1459 | /* | |
1460 | * Calculate the number of metadata blocks need to reserve | |
1461 | * to allocate given number of blocks | |
1462 | */ | |
1463 | static int ext4_calc_metadata_amount(struct inode *inode, int blocks) | |
1464 | { | |
1465 | if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) | |
1466 | return ext4_ext_calc_metadata_amount(inode, blocks); | |
1467 | ||
1468 | return ext4_indirect_calc_metadata_amount(inode, blocks); | |
1469 | } | |
1470 | ||
1471 | static int ext4_da_reserve_space(struct inode *inode, int nrblocks) | |
1472 | { | |
1473 | struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | |
1474 | unsigned long md_needed, mdblocks, total = 0; | |
1475 | ||
1476 | /* | |
1477 | * recalculate the amount of metadata blocks to reserve | |
1478 | * in order to allocate nrblocks | |
1479 | * worse case is one extent per block | |
1480 | */ | |
1481 | spin_lock(&EXT4_I(inode)->i_block_reservation_lock); | |
1482 | total = EXT4_I(inode)->i_reserved_data_blocks + nrblocks; | |
1483 | mdblocks = ext4_calc_metadata_amount(inode, total); | |
1484 | BUG_ON(mdblocks < EXT4_I(inode)->i_reserved_meta_blocks); | |
1485 | ||
1486 | md_needed = mdblocks - EXT4_I(inode)->i_reserved_meta_blocks; | |
1487 | total = md_needed + nrblocks; | |
1488 | ||
1489 | if (ext4_has_free_blocks(sbi, total) < total) { | |
1490 | spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | |
1491 | return -ENOSPC; | |
1492 | } | |
1493 | ||
1494 | /* reduce fs free blocks counter */ | |
1495 | percpu_counter_sub(&sbi->s_freeblocks_counter, total); | |
1496 | ||
1497 | EXT4_I(inode)->i_reserved_data_blocks += nrblocks; | |
1498 | EXT4_I(inode)->i_reserved_meta_blocks = mdblocks; | |
1499 | ||
1500 | spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | |
1501 | return 0; /* success */ | |
1502 | } | |
1503 | ||
1504 | void ext4_da_release_space(struct inode *inode, int used, int to_free) | |
1505 | { | |
1506 | struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | |
1507 | int total, mdb, mdb_free, release; | |
1508 | ||
1509 | spin_lock(&EXT4_I(inode)->i_block_reservation_lock); | |
1510 | /* recalculate the number of metablocks still need to be reserved */ | |
1511 | total = EXT4_I(inode)->i_reserved_data_blocks - used - to_free; | |
1512 | mdb = ext4_calc_metadata_amount(inode, total); | |
1513 | ||
1514 | /* figure out how many metablocks to release */ | |
1515 | BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks); | |
1516 | mdb_free = EXT4_I(inode)->i_reserved_meta_blocks - mdb; | |
1517 | ||
1518 | /* Account for allocated meta_blocks */ | |
1519 | mdb_free -= EXT4_I(inode)->i_allocated_meta_blocks; | |
1520 | ||
1521 | release = to_free + mdb_free; | |
1522 | ||
1523 | /* update fs free blocks counter for truncate case */ | |
1524 | percpu_counter_add(&sbi->s_freeblocks_counter, release); | |
1525 | ||
1526 | /* update per-inode reservations */ | |
1527 | BUG_ON(used + to_free > EXT4_I(inode)->i_reserved_data_blocks); | |
1528 | EXT4_I(inode)->i_reserved_data_blocks -= (used + to_free); | |
1529 | ||
1530 | BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks); | |
1531 | EXT4_I(inode)->i_reserved_meta_blocks = mdb; | |
1532 | EXT4_I(inode)->i_allocated_meta_blocks = 0; | |
1533 | spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | |
1534 | } | |
1535 | ||
1536 | static void ext4_da_page_release_reservation(struct page *page, | |
1537 | unsigned long offset) | |
1538 | { | |
1539 | int to_release = 0; | |
1540 | struct buffer_head *head, *bh; | |
1541 | unsigned int curr_off = 0; | |
1542 | ||
1543 | head = page_buffers(page); | |
1544 | bh = head; | |
1545 | do { | |
1546 | unsigned int next_off = curr_off + bh->b_size; | |
1547 | ||
1548 | if ((offset <= curr_off) && (buffer_delay(bh))) { | |
1549 | to_release++; | |
1550 | clear_buffer_delay(bh); | |
1551 | } | |
1552 | curr_off = next_off; | |
1553 | } while ((bh = bh->b_this_page) != head); | |
1554 | ext4_da_release_space(page->mapping->host, 0, to_release); | |
1555 | } | |
ac27a0ec | 1556 | |
64769240 AT |
1557 | /* |
1558 | * Delayed allocation stuff | |
1559 | */ | |
1560 | ||
1561 | struct mpage_da_data { | |
1562 | struct inode *inode; | |
1563 | struct buffer_head lbh; /* extent of blocks */ | |
1564 | unsigned long first_page, next_page; /* extent of pages */ | |
1565 | get_block_t *get_block; | |
1566 | struct writeback_control *wbc; | |
1567 | }; | |
1568 | ||
1569 | /* | |
1570 | * mpage_da_submit_io - walks through extent of pages and try to write | |
1571 | * them with __mpage_writepage() | |
1572 | * | |
1573 | * @mpd->inode: inode | |
1574 | * @mpd->first_page: first page of the extent | |
1575 | * @mpd->next_page: page after the last page of the extent | |
1576 | * @mpd->get_block: the filesystem's block mapper function | |
1577 | * | |
1578 | * By the time mpage_da_submit_io() is called we expect all blocks | |
1579 | * to be allocated. this may be wrong if allocation failed. | |
1580 | * | |
1581 | * As pages are already locked by write_cache_pages(), we can't use it | |
1582 | */ | |
1583 | static int mpage_da_submit_io(struct mpage_da_data *mpd) | |
1584 | { | |
1585 | struct address_space *mapping = mpd->inode->i_mapping; | |
1586 | struct mpage_data mpd_pp = { | |
1587 | .bio = NULL, | |
1588 | .last_block_in_bio = 0, | |
1589 | .get_block = mpd->get_block, | |
1590 | .use_writepage = 1, | |
1591 | }; | |
1592 | int ret = 0, err, nr_pages, i; | |
1593 | unsigned long index, end; | |
1594 | struct pagevec pvec; | |
1595 | ||
1596 | BUG_ON(mpd->next_page <= mpd->first_page); | |
1597 | ||
1598 | pagevec_init(&pvec, 0); | |
1599 | index = mpd->first_page; | |
1600 | end = mpd->next_page - 1; | |
1601 | ||
1602 | while (index <= end) { | |
1603 | /* XXX: optimize tail */ | |
1604 | nr_pages = pagevec_lookup(&pvec, mapping, index, PAGEVEC_SIZE); | |
1605 | if (nr_pages == 0) | |
1606 | break; | |
1607 | for (i = 0; i < nr_pages; i++) { | |
1608 | struct page *page = pvec.pages[i]; | |
1609 | ||
1610 | index = page->index; | |
1611 | if (index > end) | |
1612 | break; | |
1613 | index++; | |
1614 | ||
1615 | err = __mpage_writepage(page, mpd->wbc, &mpd_pp); | |
1616 | ||
1617 | /* | |
1618 | * In error case, we have to continue because | |
1619 | * remaining pages are still locked | |
1620 | * XXX: unlock and re-dirty them? | |
1621 | */ | |
1622 | if (ret == 0) | |
1623 | ret = err; | |
1624 | } | |
1625 | pagevec_release(&pvec); | |
1626 | } | |
1627 | if (mpd_pp.bio) | |
1628 | mpage_bio_submit(WRITE, mpd_pp.bio); | |
1629 | ||
1630 | return ret; | |
1631 | } | |
1632 | ||
1633 | /* | |
1634 | * mpage_put_bnr_to_bhs - walk blocks and assign them actual numbers | |
1635 | * | |
1636 | * @mpd->inode - inode to walk through | |
1637 | * @exbh->b_blocknr - first block on a disk | |
1638 | * @exbh->b_size - amount of space in bytes | |
1639 | * @logical - first logical block to start assignment with | |
1640 | * | |
1641 | * the function goes through all passed space and put actual disk | |
1642 | * block numbers into buffer heads, dropping BH_Delay | |
1643 | */ | |
1644 | static void mpage_put_bnr_to_bhs(struct mpage_da_data *mpd, sector_t logical, | |
1645 | struct buffer_head *exbh) | |
1646 | { | |
1647 | struct inode *inode = mpd->inode; | |
1648 | struct address_space *mapping = inode->i_mapping; | |
1649 | int blocks = exbh->b_size >> inode->i_blkbits; | |
1650 | sector_t pblock = exbh->b_blocknr, cur_logical; | |
1651 | struct buffer_head *head, *bh; | |
1652 | unsigned long index, end; | |
1653 | struct pagevec pvec; | |
1654 | int nr_pages, i; | |
1655 | ||
1656 | index = logical >> (PAGE_CACHE_SHIFT - inode->i_blkbits); | |
1657 | end = (logical + blocks - 1) >> (PAGE_CACHE_SHIFT - inode->i_blkbits); | |
1658 | cur_logical = index << (PAGE_CACHE_SHIFT - inode->i_blkbits); | |
1659 | ||
1660 | pagevec_init(&pvec, 0); | |
1661 | ||
1662 | while (index <= end) { | |
1663 | /* XXX: optimize tail */ | |
1664 | nr_pages = pagevec_lookup(&pvec, mapping, index, PAGEVEC_SIZE); | |
1665 | if (nr_pages == 0) | |
1666 | break; | |
1667 | for (i = 0; i < nr_pages; i++) { | |
1668 | struct page *page = pvec.pages[i]; | |
1669 | ||
1670 | index = page->index; | |
1671 | if (index > end) | |
1672 | break; | |
1673 | index++; | |
1674 | ||
1675 | BUG_ON(!PageLocked(page)); | |
1676 | BUG_ON(PageWriteback(page)); | |
1677 | BUG_ON(!page_has_buffers(page)); | |
1678 | ||
1679 | bh = page_buffers(page); | |
1680 | head = bh; | |
1681 | ||
1682 | /* skip blocks out of the range */ | |
1683 | do { | |
1684 | if (cur_logical >= logical) | |
1685 | break; | |
1686 | cur_logical++; | |
1687 | } while ((bh = bh->b_this_page) != head); | |
1688 | ||
1689 | do { | |
1690 | if (cur_logical >= logical + blocks) | |
1691 | break; | |
64769240 AT |
1692 | if (buffer_delay(bh)) { |
1693 | bh->b_blocknr = pblock; | |
1694 | clear_buffer_delay(bh); | |
61628a3f | 1695 | } else if (buffer_mapped(bh)) |
64769240 | 1696 | BUG_ON(bh->b_blocknr != pblock); |
64769240 AT |
1697 | |
1698 | cur_logical++; | |
1699 | pblock++; | |
1700 | } while ((bh = bh->b_this_page) != head); | |
1701 | } | |
1702 | pagevec_release(&pvec); | |
1703 | } | |
1704 | } | |
1705 | ||
1706 | ||
1707 | /* | |
1708 | * __unmap_underlying_blocks - just a helper function to unmap | |
1709 | * set of blocks described by @bh | |
1710 | */ | |
1711 | static inline void __unmap_underlying_blocks(struct inode *inode, | |
1712 | struct buffer_head *bh) | |
1713 | { | |
1714 | struct block_device *bdev = inode->i_sb->s_bdev; | |
1715 | int blocks, i; | |
1716 | ||
1717 | blocks = bh->b_size >> inode->i_blkbits; | |
1718 | for (i = 0; i < blocks; i++) | |
1719 | unmap_underlying_metadata(bdev, bh->b_blocknr + i); | |
1720 | } | |
1721 | ||
1722 | /* | |
1723 | * mpage_da_map_blocks - go through given space | |
1724 | * | |
1725 | * @mpd->lbh - bh describing space | |
1726 | * @mpd->get_block - the filesystem's block mapper function | |
1727 | * | |
1728 | * The function skips space we know is already mapped to disk blocks. | |
1729 | * | |
1730 | * The function ignores errors ->get_block() returns, thus real | |
1731 | * error handling is postponed to __mpage_writepage() | |
1732 | */ | |
1733 | static void mpage_da_map_blocks(struct mpage_da_data *mpd) | |
1734 | { | |
1735 | struct buffer_head *lbh = &mpd->lbh; | |
1736 | int err = 0, remain = lbh->b_size; | |
1737 | sector_t next = lbh->b_blocknr; | |
1738 | struct buffer_head new; | |
1739 | ||
1740 | /* | |
1741 | * We consider only non-mapped and non-allocated blocks | |
1742 | */ | |
1743 | if (buffer_mapped(lbh) && !buffer_delay(lbh)) | |
1744 | return; | |
1745 | ||
1746 | while (remain) { | |
1747 | new.b_state = lbh->b_state; | |
1748 | new.b_blocknr = 0; | |
1749 | new.b_size = remain; | |
1750 | err = mpd->get_block(mpd->inode, next, &new, 1); | |
1751 | if (err) { | |
1752 | /* | |
1753 | * Rather than implement own error handling | |
1754 | * here, we just leave remaining blocks | |
1755 | * unallocated and try again with ->writepage() | |
1756 | */ | |
1757 | break; | |
1758 | } | |
1759 | BUG_ON(new.b_size == 0); | |
1760 | ||
1761 | if (buffer_new(&new)) | |
1762 | __unmap_underlying_blocks(mpd->inode, &new); | |
1763 | ||
1764 | /* | |
1765 | * If blocks are delayed marked, we need to | |
1766 | * put actual blocknr and drop delayed bit | |
1767 | */ | |
1768 | if (buffer_delay(lbh)) | |
1769 | mpage_put_bnr_to_bhs(mpd, next, &new); | |
1770 | ||
61628a3f MC |
1771 | /* go for the remaining blocks */ |
1772 | next += new.b_size >> mpd->inode->i_blkbits; | |
1773 | remain -= new.b_size; | |
1774 | } | |
64769240 AT |
1775 | } |
1776 | ||
1777 | #define BH_FLAGS ((1 << BH_Uptodate) | (1 << BH_Mapped) | (1 << BH_Delay)) | |
1778 | ||
1779 | /* | |
1780 | * mpage_add_bh_to_extent - try to add one more block to extent of blocks | |
1781 | * | |
1782 | * @mpd->lbh - extent of blocks | |
1783 | * @logical - logical number of the block in the file | |
1784 | * @bh - bh of the block (used to access block's state) | |
1785 | * | |
1786 | * the function is used to collect contig. blocks in same state | |
1787 | */ | |
1788 | static void mpage_add_bh_to_extent(struct mpage_da_data *mpd, | |
1789 | sector_t logical, struct buffer_head *bh) | |
1790 | { | |
1791 | struct buffer_head *lbh = &mpd->lbh; | |
1792 | sector_t next; | |
1793 | ||
1794 | next = lbh->b_blocknr + (lbh->b_size >> mpd->inode->i_blkbits); | |
1795 | ||
1796 | /* | |
1797 | * First block in the extent | |
1798 | */ | |
1799 | if (lbh->b_size == 0) { | |
1800 | lbh->b_blocknr = logical; | |
1801 | lbh->b_size = bh->b_size; | |
1802 | lbh->b_state = bh->b_state & BH_FLAGS; | |
1803 | return; | |
1804 | } | |
1805 | ||
1806 | /* | |
1807 | * Can we merge the block to our big extent? | |
1808 | */ | |
1809 | if (logical == next && (bh->b_state & BH_FLAGS) == lbh->b_state) { | |
1810 | lbh->b_size += bh->b_size; | |
1811 | return; | |
1812 | } | |
1813 | ||
1814 | /* | |
1815 | * We couldn't merge the block to our extent, so we | |
1816 | * need to flush current extent and start new one | |
1817 | */ | |
1818 | mpage_da_map_blocks(mpd); | |
1819 | ||
1820 | /* | |
1821 | * Now start a new extent | |
1822 | */ | |
1823 | lbh->b_size = bh->b_size; | |
1824 | lbh->b_state = bh->b_state & BH_FLAGS; | |
1825 | lbh->b_blocknr = logical; | |
1826 | } | |
1827 | ||
1828 | /* | |
1829 | * __mpage_da_writepage - finds extent of pages and blocks | |
1830 | * | |
1831 | * @page: page to consider | |
1832 | * @wbc: not used, we just follow rules | |
1833 | * @data: context | |
1834 | * | |
1835 | * The function finds extents of pages and scan them for all blocks. | |
1836 | */ | |
1837 | static int __mpage_da_writepage(struct page *page, | |
1838 | struct writeback_control *wbc, void *data) | |
1839 | { | |
1840 | struct mpage_da_data *mpd = data; | |
1841 | struct inode *inode = mpd->inode; | |
1842 | struct buffer_head *bh, *head, fake; | |
1843 | sector_t logical; | |
1844 | ||
1845 | /* | |
1846 | * Can we merge this page to current extent? | |
1847 | */ | |
1848 | if (mpd->next_page != page->index) { | |
1849 | /* | |
1850 | * Nope, we can't. So, we map non-allocated blocks | |
1851 | * and start IO on them using __mpage_writepage() | |
1852 | */ | |
1853 | if (mpd->next_page != mpd->first_page) { | |
1854 | mpage_da_map_blocks(mpd); | |
1855 | mpage_da_submit_io(mpd); | |
1856 | } | |
1857 | ||
1858 | /* | |
1859 | * Start next extent of pages ... | |
1860 | */ | |
1861 | mpd->first_page = page->index; | |
1862 | ||
1863 | /* | |
1864 | * ... and blocks | |
1865 | */ | |
1866 | mpd->lbh.b_size = 0; | |
1867 | mpd->lbh.b_state = 0; | |
1868 | mpd->lbh.b_blocknr = 0; | |
1869 | } | |
1870 | ||
1871 | mpd->next_page = page->index + 1; | |
1872 | logical = (sector_t) page->index << | |
1873 | (PAGE_CACHE_SHIFT - inode->i_blkbits); | |
1874 | ||
1875 | if (!page_has_buffers(page)) { | |
1876 | /* | |
1877 | * There is no attached buffer heads yet (mmap?) | |
1878 | * we treat the page asfull of dirty blocks | |
1879 | */ | |
1880 | bh = &fake; | |
1881 | bh->b_size = PAGE_CACHE_SIZE; | |
1882 | bh->b_state = 0; | |
1883 | set_buffer_dirty(bh); | |
1884 | set_buffer_uptodate(bh); | |
1885 | mpage_add_bh_to_extent(mpd, logical, bh); | |
1886 | } else { | |
1887 | /* | |
1888 | * Page with regular buffer heads, just add all dirty ones | |
1889 | */ | |
1890 | head = page_buffers(page); | |
1891 | bh = head; | |
1892 | do { | |
1893 | BUG_ON(buffer_locked(bh)); | |
1894 | if (buffer_dirty(bh)) | |
1895 | mpage_add_bh_to_extent(mpd, logical, bh); | |
1896 | logical++; | |
1897 | } while ((bh = bh->b_this_page) != head); | |
1898 | } | |
1899 | ||
1900 | return 0; | |
1901 | } | |
1902 | ||
1903 | /* | |
1904 | * mpage_da_writepages - walk the list of dirty pages of the given | |
1905 | * address space, allocates non-allocated blocks, maps newly-allocated | |
1906 | * blocks to existing bhs and issue IO them | |
1907 | * | |
1908 | * @mapping: address space structure to write | |
1909 | * @wbc: subtract the number of written pages from *@wbc->nr_to_write | |
1910 | * @get_block: the filesystem's block mapper function. | |
1911 | * | |
1912 | * This is a library function, which implements the writepages() | |
1913 | * address_space_operation. | |
1914 | * | |
1915 | * In order to avoid duplication of logic that deals with partial pages, | |
1916 | * multiple bio per page, etc, we find non-allocated blocks, allocate | |
1917 | * them with minimal calls to ->get_block() and re-use __mpage_writepage() | |
1918 | * | |
1919 | * It's important that we call __mpage_writepage() only once for each | |
1920 | * involved page, otherwise we'd have to implement more complicated logic | |
1921 | * to deal with pages w/o PG_lock or w/ PG_writeback and so on. | |
1922 | * | |
1923 | * See comments to mpage_writepages() | |
1924 | */ | |
1925 | static int mpage_da_writepages(struct address_space *mapping, | |
1926 | struct writeback_control *wbc, | |
1927 | get_block_t get_block) | |
1928 | { | |
1929 | struct mpage_da_data mpd; | |
1930 | int ret; | |
1931 | ||
1932 | if (!get_block) | |
1933 | return generic_writepages(mapping, wbc); | |
1934 | ||
1935 | mpd.wbc = wbc; | |
1936 | mpd.inode = mapping->host; | |
1937 | mpd.lbh.b_size = 0; | |
1938 | mpd.lbh.b_state = 0; | |
1939 | mpd.lbh.b_blocknr = 0; | |
1940 | mpd.first_page = 0; | |
1941 | mpd.next_page = 0; | |
1942 | mpd.get_block = get_block; | |
1943 | ||
1944 | ret = write_cache_pages(mapping, wbc, __mpage_da_writepage, &mpd); | |
1945 | ||
1946 | /* | |
1947 | * Handle last extent of pages | |
1948 | */ | |
1949 | if (mpd.next_page != mpd.first_page) { | |
1950 | mpage_da_map_blocks(&mpd); | |
1951 | mpage_da_submit_io(&mpd); | |
1952 | } | |
1953 | ||
1954 | return ret; | |
1955 | } | |
1956 | ||
1957 | /* | |
1958 | * this is a special callback for ->write_begin() only | |
1959 | * it's intention is to return mapped block or reserve space | |
1960 | */ | |
1961 | static int ext4_da_get_block_prep(struct inode *inode, sector_t iblock, | |
1962 | struct buffer_head *bh_result, int create) | |
1963 | { | |
1964 | int ret = 0; | |
1965 | ||
1966 | BUG_ON(create == 0); | |
1967 | BUG_ON(bh_result->b_size != inode->i_sb->s_blocksize); | |
1968 | ||
1969 | /* | |
1970 | * first, we need to know whether the block is allocated already | |
1971 | * preallocated blocks are unmapped but should treated | |
1972 | * the same as allocated blocks. | |
1973 | */ | |
d2a17637 MC |
1974 | ret = ext4_get_blocks_wrap(NULL, inode, iblock, 1, bh_result, 0, 0, 0); |
1975 | if ((ret == 0) && !buffer_delay(bh_result)) { | |
1976 | /* the block isn't (pre)allocated yet, let's reserve space */ | |
64769240 AT |
1977 | /* |
1978 | * XXX: __block_prepare_write() unmaps passed block, | |
1979 | * is it OK? | |
1980 | */ | |
d2a17637 MC |
1981 | ret = ext4_da_reserve_space(inode, 1); |
1982 | if (ret) | |
1983 | /* not enough space to reserve */ | |
1984 | return ret; | |
1985 | ||
64769240 AT |
1986 | map_bh(bh_result, inode->i_sb, 0); |
1987 | set_buffer_new(bh_result); | |
1988 | set_buffer_delay(bh_result); | |
1989 | } else if (ret > 0) { | |
1990 | bh_result->b_size = (ret << inode->i_blkbits); | |
1991 | ret = 0; | |
1992 | } | |
1993 | ||
1994 | return ret; | |
1995 | } | |
d2a17637 | 1996 | #define EXT4_DELALLOC_RSVED 1 |
64769240 AT |
1997 | static int ext4_da_get_block_write(struct inode *inode, sector_t iblock, |
1998 | struct buffer_head *bh_result, int create) | |
1999 | { | |
61628a3f | 2000 | int ret; |
64769240 AT |
2001 | unsigned max_blocks = bh_result->b_size >> inode->i_blkbits; |
2002 | loff_t disksize = EXT4_I(inode)->i_disksize; | |
2003 | handle_t *handle = NULL; | |
2004 | ||
61628a3f | 2005 | handle = ext4_journal_current_handle(); |
f0e6c985 AK |
2006 | if (!handle) { |
2007 | ret = ext4_get_blocks_wrap(handle, inode, iblock, max_blocks, | |
2008 | bh_result, 0, 0, 0); | |
2009 | BUG_ON(!ret); | |
2010 | } else { | |
2011 | ret = ext4_get_blocks_wrap(handle, inode, iblock, max_blocks, | |
d2a17637 | 2012 | bh_result, create, 0, EXT4_DELALLOC_RSVED); |
f0e6c985 AK |
2013 | } |
2014 | ||
64769240 AT |
2015 | if (ret > 0) { |
2016 | bh_result->b_size = (ret << inode->i_blkbits); | |
2017 | ||
2018 | /* | |
2019 | * Update on-disk size along with block allocation | |
2020 | * we don't use 'extend_disksize' as size may change | |
2021 | * within already allocated block -bzzz | |
2022 | */ | |
2023 | disksize = ((loff_t) iblock + ret) << inode->i_blkbits; | |
2024 | if (disksize > i_size_read(inode)) | |
2025 | disksize = i_size_read(inode); | |
2026 | if (disksize > EXT4_I(inode)->i_disksize) { | |
2027 | /* | |
2028 | * XXX: replace with spinlock if seen contended -bzzz | |
2029 | */ | |
2030 | down_write(&EXT4_I(inode)->i_data_sem); | |
2031 | if (disksize > EXT4_I(inode)->i_disksize) | |
2032 | EXT4_I(inode)->i_disksize = disksize; | |
2033 | up_write(&EXT4_I(inode)->i_data_sem); | |
2034 | ||
2035 | if (EXT4_I(inode)->i_disksize == disksize) { | |
61628a3f MC |
2036 | ret = ext4_mark_inode_dirty(handle, inode); |
2037 | return ret; | |
64769240 AT |
2038 | } |
2039 | } | |
64769240 AT |
2040 | ret = 0; |
2041 | } | |
64769240 AT |
2042 | return ret; |
2043 | } | |
61628a3f MC |
2044 | |
2045 | static int ext4_bh_unmapped_or_delay(handle_t *handle, struct buffer_head *bh) | |
2046 | { | |
f0e6c985 AK |
2047 | /* |
2048 | * unmapped buffer is possible for holes. | |
2049 | * delay buffer is possible with delayed allocation | |
2050 | */ | |
2051 | return ((!buffer_mapped(bh) || buffer_delay(bh)) && buffer_dirty(bh)); | |
2052 | } | |
2053 | ||
2054 | static int ext4_normal_get_block_write(struct inode *inode, sector_t iblock, | |
2055 | struct buffer_head *bh_result, int create) | |
2056 | { | |
2057 | int ret = 0; | |
2058 | unsigned max_blocks = bh_result->b_size >> inode->i_blkbits; | |
2059 | ||
2060 | /* | |
2061 | * we don't want to do block allocation in writepage | |
2062 | * so call get_block_wrap with create = 0 | |
2063 | */ | |
2064 | ret = ext4_get_blocks_wrap(NULL, inode, iblock, max_blocks, | |
2065 | bh_result, 0, 0, 0); | |
2066 | if (ret > 0) { | |
2067 | bh_result->b_size = (ret << inode->i_blkbits); | |
2068 | ret = 0; | |
2069 | } | |
2070 | return ret; | |
61628a3f MC |
2071 | } |
2072 | ||
61628a3f | 2073 | /* |
f0e6c985 AK |
2074 | * get called vi ext4_da_writepages after taking page lock (have journal handle) |
2075 | * get called via journal_submit_inode_data_buffers (no journal handle) | |
2076 | * get called via shrink_page_list via pdflush (no journal handle) | |
2077 | * or grab_page_cache when doing write_begin (have journal handle) | |
61628a3f | 2078 | */ |
64769240 AT |
2079 | static int ext4_da_writepage(struct page *page, |
2080 | struct writeback_control *wbc) | |
2081 | { | |
64769240 | 2082 | int ret = 0; |
61628a3f MC |
2083 | loff_t size; |
2084 | unsigned long len; | |
61628a3f MC |
2085 | struct buffer_head *page_bufs; |
2086 | struct inode *inode = page->mapping->host; | |
2087 | ||
f0e6c985 AK |
2088 | size = i_size_read(inode); |
2089 | if (page->index == size >> PAGE_CACHE_SHIFT) | |
2090 | len = size & ~PAGE_CACHE_MASK; | |
2091 | else | |
2092 | len = PAGE_CACHE_SIZE; | |
64769240 | 2093 | |
f0e6c985 | 2094 | if (page_has_buffers(page)) { |
61628a3f | 2095 | page_bufs = page_buffers(page); |
f0e6c985 AK |
2096 | if (walk_page_buffers(NULL, page_bufs, 0, len, NULL, |
2097 | ext4_bh_unmapped_or_delay)) { | |
61628a3f | 2098 | /* |
f0e6c985 AK |
2099 | * We don't want to do block allocation |
2100 | * So redirty the page and return | |
cd1aac32 AK |
2101 | * We may reach here when we do a journal commit |
2102 | * via journal_submit_inode_data_buffers. | |
2103 | * If we don't have mapping block we just ignore | |
f0e6c985 AK |
2104 | * them. We can also reach here via shrink_page_list |
2105 | */ | |
2106 | redirty_page_for_writepage(wbc, page); | |
2107 | unlock_page(page); | |
2108 | return 0; | |
2109 | } | |
2110 | } else { | |
2111 | /* | |
2112 | * The test for page_has_buffers() is subtle: | |
2113 | * We know the page is dirty but it lost buffers. That means | |
2114 | * that at some moment in time after write_begin()/write_end() | |
2115 | * has been called all buffers have been clean and thus they | |
2116 | * must have been written at least once. So they are all | |
2117 | * mapped and we can happily proceed with mapping them | |
2118 | * and writing the page. | |
2119 | * | |
2120 | * Try to initialize the buffer_heads and check whether | |
2121 | * all are mapped and non delay. We don't want to | |
2122 | * do block allocation here. | |
2123 | */ | |
2124 | ret = block_prepare_write(page, 0, PAGE_CACHE_SIZE, | |
2125 | ext4_normal_get_block_write); | |
2126 | if (!ret) { | |
2127 | page_bufs = page_buffers(page); | |
2128 | /* check whether all are mapped and non delay */ | |
2129 | if (walk_page_buffers(NULL, page_bufs, 0, len, NULL, | |
2130 | ext4_bh_unmapped_or_delay)) { | |
2131 | redirty_page_for_writepage(wbc, page); | |
2132 | unlock_page(page); | |
2133 | return 0; | |
2134 | } | |
2135 | } else { | |
2136 | /* | |
2137 | * We can't do block allocation here | |
2138 | * so just redity the page and unlock | |
2139 | * and return | |
61628a3f | 2140 | */ |
61628a3f MC |
2141 | redirty_page_for_writepage(wbc, page); |
2142 | unlock_page(page); | |
2143 | return 0; | |
2144 | } | |
64769240 AT |
2145 | } |
2146 | ||
2147 | if (test_opt(inode->i_sb, NOBH) && ext4_should_writeback_data(inode)) | |
f0e6c985 | 2148 | ret = nobh_writepage(page, ext4_normal_get_block_write, wbc); |
64769240 | 2149 | else |
f0e6c985 AK |
2150 | ret = block_write_full_page(page, |
2151 | ext4_normal_get_block_write, | |
2152 | wbc); | |
64769240 | 2153 | |
64769240 AT |
2154 | return ret; |
2155 | } | |
2156 | ||
61628a3f MC |
2157 | /* |
2158 | * For now just follow the DIO way to estimate the max credits | |
2159 | * needed to write out EXT4_MAX_WRITEBACK_PAGES. | |
2160 | * todo: need to calculate the max credits need for | |
2161 | * extent based files, currently the DIO credits is based on | |
2162 | * indirect-blocks mapping way. | |
2163 | * | |
2164 | * Probably should have a generic way to calculate credits | |
2165 | * for DIO, writepages, and truncate | |
2166 | */ | |
2167 | #define EXT4_MAX_WRITEBACK_PAGES DIO_MAX_BLOCKS | |
2168 | #define EXT4_MAX_WRITEBACK_CREDITS DIO_CREDITS | |
2169 | ||
64769240 AT |
2170 | static int ext4_da_writepages(struct address_space *mapping, |
2171 | struct writeback_control *wbc) | |
2172 | { | |
61628a3f MC |
2173 | struct inode *inode = mapping->host; |
2174 | handle_t *handle = NULL; | |
2175 | int needed_blocks; | |
2176 | int ret = 0; | |
2177 | long to_write; | |
2178 | loff_t range_start = 0; | |
2179 | ||
2180 | /* | |
2181 | * No pages to write? This is mainly a kludge to avoid starting | |
2182 | * a transaction for special inodes like journal inode on last iput() | |
2183 | * because that could violate lock ordering on umount | |
2184 | */ | |
2185 | if (!mapping->nrpages) | |
2186 | return 0; | |
2187 | ||
2188 | /* | |
cd1aac32 | 2189 | * Estimate the worse case needed credits to write out |
61628a3f MC |
2190 | * EXT4_MAX_BUF_BLOCKS pages |
2191 | */ | |
2192 | needed_blocks = EXT4_MAX_WRITEBACK_CREDITS; | |
2193 | ||
2194 | to_write = wbc->nr_to_write; | |
2195 | if (!wbc->range_cyclic) { | |
2196 | /* | |
2197 | * If range_cyclic is not set force range_cont | |
2198 | * and save the old writeback_index | |
2199 | */ | |
2200 | wbc->range_cont = 1; | |
2201 | range_start = wbc->range_start; | |
2202 | } | |
2203 | ||
2204 | while (!ret && to_write) { | |
2205 | /* start a new transaction*/ | |
2206 | handle = ext4_journal_start(inode, needed_blocks); | |
2207 | if (IS_ERR(handle)) { | |
2208 | ret = PTR_ERR(handle); | |
2209 | goto out_writepages; | |
2210 | } | |
cd1aac32 AK |
2211 | if (ext4_should_order_data(inode)) { |
2212 | /* | |
2213 | * With ordered mode we need to add | |
2214 | * the inode to the journal handle | |
2215 | * when we do block allocation. | |
2216 | */ | |
2217 | ret = ext4_jbd2_file_inode(handle, inode); | |
2218 | if (ret) { | |
2219 | ext4_journal_stop(handle); | |
2220 | goto out_writepages; | |
2221 | } | |
2222 | ||
2223 | } | |
61628a3f MC |
2224 | /* |
2225 | * set the max dirty pages could be write at a time | |
2226 | * to fit into the reserved transaction credits | |
2227 | */ | |
2228 | if (wbc->nr_to_write > EXT4_MAX_WRITEBACK_PAGES) | |
2229 | wbc->nr_to_write = EXT4_MAX_WRITEBACK_PAGES; | |
2230 | ||
2231 | to_write -= wbc->nr_to_write; | |
2232 | ret = mpage_da_writepages(mapping, wbc, | |
2233 | ext4_da_get_block_write); | |
2234 | ext4_journal_stop(handle); | |
2235 | if (wbc->nr_to_write) { | |
2236 | /* | |
2237 | * There is no more writeout needed | |
2238 | * or we requested for a noblocking writeout | |
2239 | * and we found the device congested | |
2240 | */ | |
2241 | to_write += wbc->nr_to_write; | |
2242 | break; | |
2243 | } | |
2244 | wbc->nr_to_write = to_write; | |
2245 | } | |
2246 | ||
2247 | out_writepages: | |
2248 | wbc->nr_to_write = to_write; | |
2249 | if (range_start) | |
2250 | wbc->range_start = range_start; | |
2251 | return ret; | |
64769240 AT |
2252 | } |
2253 | ||
2254 | static int ext4_da_write_begin(struct file *file, struct address_space *mapping, | |
2255 | loff_t pos, unsigned len, unsigned flags, | |
2256 | struct page **pagep, void **fsdata) | |
2257 | { | |
d2a17637 | 2258 | int ret, retries = 0; |
64769240 AT |
2259 | struct page *page; |
2260 | pgoff_t index; | |
2261 | unsigned from, to; | |
2262 | struct inode *inode = mapping->host; | |
2263 | handle_t *handle; | |
2264 | ||
2265 | index = pos >> PAGE_CACHE_SHIFT; | |
2266 | from = pos & (PAGE_CACHE_SIZE - 1); | |
2267 | to = from + len; | |
2268 | ||
d2a17637 | 2269 | retry: |
64769240 AT |
2270 | /* |
2271 | * With delayed allocation, we don't log the i_disksize update | |
2272 | * if there is delayed block allocation. But we still need | |
2273 | * to journalling the i_disksize update if writes to the end | |
2274 | * of file which has an already mapped buffer. | |
2275 | */ | |
2276 | handle = ext4_journal_start(inode, 1); | |
2277 | if (IS_ERR(handle)) { | |
2278 | ret = PTR_ERR(handle); | |
2279 | goto out; | |
2280 | } | |
2281 | ||
2282 | page = __grab_cache_page(mapping, index); | |
2283 | if (!page) | |
2284 | return -ENOMEM; | |
2285 | *pagep = page; | |
2286 | ||
2287 | ret = block_write_begin(file, mapping, pos, len, flags, pagep, fsdata, | |
2288 | ext4_da_get_block_prep); | |
2289 | if (ret < 0) { | |
2290 | unlock_page(page); | |
2291 | ext4_journal_stop(handle); | |
2292 | page_cache_release(page); | |
2293 | } | |
2294 | ||
d2a17637 MC |
2295 | if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) |
2296 | goto retry; | |
64769240 AT |
2297 | out: |
2298 | return ret; | |
2299 | } | |
2300 | ||
632eaeab MC |
2301 | /* |
2302 | * Check if we should update i_disksize | |
2303 | * when write to the end of file but not require block allocation | |
2304 | */ | |
2305 | static int ext4_da_should_update_i_disksize(struct page *page, | |
2306 | unsigned long offset) | |
2307 | { | |
2308 | struct buffer_head *bh; | |
2309 | struct inode *inode = page->mapping->host; | |
2310 | unsigned int idx; | |
2311 | int i; | |
2312 | ||
2313 | bh = page_buffers(page); | |
2314 | idx = offset >> inode->i_blkbits; | |
2315 | ||
2316 | for (i=0; i < idx; i++) | |
2317 | bh = bh->b_this_page; | |
2318 | ||
2319 | if (!buffer_mapped(bh) || (buffer_delay(bh))) | |
2320 | return 0; | |
2321 | return 1; | |
2322 | } | |
2323 | ||
64769240 AT |
2324 | static int ext4_da_write_end(struct file *file, |
2325 | struct address_space *mapping, | |
2326 | loff_t pos, unsigned len, unsigned copied, | |
2327 | struct page *page, void *fsdata) | |
2328 | { | |
2329 | struct inode *inode = mapping->host; | |
2330 | int ret = 0, ret2; | |
2331 | handle_t *handle = ext4_journal_current_handle(); | |
2332 | loff_t new_i_size; | |
632eaeab MC |
2333 | unsigned long start, end; |
2334 | ||
2335 | start = pos & (PAGE_CACHE_SIZE - 1); | |
2336 | end = start + copied -1; | |
64769240 AT |
2337 | |
2338 | /* | |
2339 | * generic_write_end() will run mark_inode_dirty() if i_size | |
2340 | * changes. So let's piggyback the i_disksize mark_inode_dirty | |
2341 | * into that. | |
2342 | */ | |
2343 | ||
2344 | new_i_size = pos + copied; | |
632eaeab MC |
2345 | if (new_i_size > EXT4_I(inode)->i_disksize) { |
2346 | if (ext4_da_should_update_i_disksize(page, end)) { | |
2347 | down_write(&EXT4_I(inode)->i_data_sem); | |
2348 | if (new_i_size > EXT4_I(inode)->i_disksize) { | |
2349 | /* | |
2350 | * Updating i_disksize when extending file | |
2351 | * without needing block allocation | |
2352 | */ | |
2353 | if (ext4_should_order_data(inode)) | |
2354 | ret = ext4_jbd2_file_inode(handle, | |
2355 | inode); | |
64769240 | 2356 | |
632eaeab MC |
2357 | EXT4_I(inode)->i_disksize = new_i_size; |
2358 | } | |
2359 | up_write(&EXT4_I(inode)->i_data_sem); | |
64769240 | 2360 | } |
632eaeab | 2361 | } |
64769240 AT |
2362 | ret2 = generic_write_end(file, mapping, pos, len, copied, |
2363 | page, fsdata); | |
2364 | copied = ret2; | |
2365 | if (ret2 < 0) | |
2366 | ret = ret2; | |
2367 | ret2 = ext4_journal_stop(handle); | |
2368 | if (!ret) | |
2369 | ret = ret2; | |
2370 | ||
2371 | return ret ? ret : copied; | |
2372 | } | |
2373 | ||
2374 | static void ext4_da_invalidatepage(struct page *page, unsigned long offset) | |
2375 | { | |
64769240 AT |
2376 | /* |
2377 | * Drop reserved blocks | |
2378 | */ | |
2379 | BUG_ON(!PageLocked(page)); | |
2380 | if (!page_has_buffers(page)) | |
2381 | goto out; | |
2382 | ||
d2a17637 | 2383 | ext4_da_page_release_reservation(page, offset); |
64769240 AT |
2384 | |
2385 | out: | |
2386 | ext4_invalidatepage(page, offset); | |
2387 | ||
2388 | return; | |
2389 | } | |
2390 | ||
2391 | ||
ac27a0ec DK |
2392 | /* |
2393 | * bmap() is special. It gets used by applications such as lilo and by | |
2394 | * the swapper to find the on-disk block of a specific piece of data. | |
2395 | * | |
2396 | * Naturally, this is dangerous if the block concerned is still in the | |
617ba13b | 2397 | * journal. If somebody makes a swapfile on an ext4 data-journaling |
ac27a0ec DK |
2398 | * filesystem and enables swap, then they may get a nasty shock when the |
2399 | * data getting swapped to that swapfile suddenly gets overwritten by | |
2400 | * the original zero's written out previously to the journal and | |
2401 | * awaiting writeback in the kernel's buffer cache. | |
2402 | * | |
2403 | * So, if we see any bmap calls here on a modified, data-journaled file, | |
2404 | * take extra steps to flush any blocks which might be in the cache. | |
2405 | */ | |
617ba13b | 2406 | static sector_t ext4_bmap(struct address_space *mapping, sector_t block) |
ac27a0ec DK |
2407 | { |
2408 | struct inode *inode = mapping->host; | |
2409 | journal_t *journal; | |
2410 | int err; | |
2411 | ||
64769240 AT |
2412 | if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY) && |
2413 | test_opt(inode->i_sb, DELALLOC)) { | |
2414 | /* | |
2415 | * With delalloc we want to sync the file | |
2416 | * so that we can make sure we allocate | |
2417 | * blocks for file | |
2418 | */ | |
2419 | filemap_write_and_wait(mapping); | |
2420 | } | |
2421 | ||
617ba13b | 2422 | if (EXT4_I(inode)->i_state & EXT4_STATE_JDATA) { |
ac27a0ec DK |
2423 | /* |
2424 | * This is a REALLY heavyweight approach, but the use of | |
2425 | * bmap on dirty files is expected to be extremely rare: | |
2426 | * only if we run lilo or swapon on a freshly made file | |
2427 | * do we expect this to happen. | |
2428 | * | |
2429 | * (bmap requires CAP_SYS_RAWIO so this does not | |
2430 | * represent an unprivileged user DOS attack --- we'd be | |
2431 | * in trouble if mortal users could trigger this path at | |
2432 | * will.) | |
2433 | * | |
617ba13b | 2434 | * NB. EXT4_STATE_JDATA is not set on files other than |
ac27a0ec DK |
2435 | * regular files. If somebody wants to bmap a directory |
2436 | * or symlink and gets confused because the buffer | |
2437 | * hasn't yet been flushed to disk, they deserve | |
2438 | * everything they get. | |
2439 | */ | |
2440 | ||
617ba13b MC |
2441 | EXT4_I(inode)->i_state &= ~EXT4_STATE_JDATA; |
2442 | journal = EXT4_JOURNAL(inode); | |
dab291af MC |
2443 | jbd2_journal_lock_updates(journal); |
2444 | err = jbd2_journal_flush(journal); | |
2445 | jbd2_journal_unlock_updates(journal); | |
ac27a0ec DK |
2446 | |
2447 | if (err) | |
2448 | return 0; | |
2449 | } | |
2450 | ||
617ba13b | 2451 | return generic_block_bmap(mapping,block,ext4_get_block); |
ac27a0ec DK |
2452 | } |
2453 | ||
2454 | static int bget_one(handle_t *handle, struct buffer_head *bh) | |
2455 | { | |
2456 | get_bh(bh); | |
2457 | return 0; | |
2458 | } | |
2459 | ||
2460 | static int bput_one(handle_t *handle, struct buffer_head *bh) | |
2461 | { | |
2462 | put_bh(bh); | |
2463 | return 0; | |
2464 | } | |
2465 | ||
ac27a0ec | 2466 | /* |
678aaf48 JK |
2467 | * Note that we don't need to start a transaction unless we're journaling data |
2468 | * because we should have holes filled from ext4_page_mkwrite(). We even don't | |
2469 | * need to file the inode to the transaction's list in ordered mode because if | |
2470 | * we are writing back data added by write(), the inode is already there and if | |
2471 | * we are writing back data modified via mmap(), noone guarantees in which | |
2472 | * transaction the data will hit the disk. In case we are journaling data, we | |
2473 | * cannot start transaction directly because transaction start ranks above page | |
2474 | * lock so we have to do some magic. | |
ac27a0ec | 2475 | * |
678aaf48 | 2476 | * In all journaling modes block_write_full_page() will start the I/O. |
ac27a0ec DK |
2477 | * |
2478 | * Problem: | |
2479 | * | |
617ba13b MC |
2480 | * ext4_writepage() -> kmalloc() -> __alloc_pages() -> page_launder() -> |
2481 | * ext4_writepage() | |
ac27a0ec DK |
2482 | * |
2483 | * Similar for: | |
2484 | * | |
617ba13b | 2485 | * ext4_file_write() -> generic_file_write() -> __alloc_pages() -> ... |
ac27a0ec | 2486 | * |
617ba13b | 2487 | * Same applies to ext4_get_block(). We will deadlock on various things like |
0e855ac8 | 2488 | * lock_journal and i_data_sem |
ac27a0ec DK |
2489 | * |
2490 | * Setting PF_MEMALLOC here doesn't work - too many internal memory | |
2491 | * allocations fail. | |
2492 | * | |
2493 | * 16May01: If we're reentered then journal_current_handle() will be | |
2494 | * non-zero. We simply *return*. | |
2495 | * | |
2496 | * 1 July 2001: @@@ FIXME: | |
2497 | * In journalled data mode, a data buffer may be metadata against the | |
2498 | * current transaction. But the same file is part of a shared mapping | |
2499 | * and someone does a writepage() on it. | |
2500 | * | |
2501 | * We will move the buffer onto the async_data list, but *after* it has | |
2502 | * been dirtied. So there's a small window where we have dirty data on | |
2503 | * BJ_Metadata. | |
2504 | * | |
2505 | * Note that this only applies to the last partial page in the file. The | |
2506 | * bit which block_write_full_page() uses prepare/commit for. (That's | |
2507 | * broken code anyway: it's wrong for msync()). | |
2508 | * | |
2509 | * It's a rare case: affects the final partial page, for journalled data | |
2510 | * where the file is subject to bith write() and writepage() in the same | |
2511 | * transction. To fix it we'll need a custom block_write_full_page(). | |
2512 | * We'll probably need that anyway for journalling writepage() output. | |
2513 | * | |
2514 | * We don't honour synchronous mounts for writepage(). That would be | |
2515 | * disastrous. Any write() or metadata operation will sync the fs for | |
2516 | * us. | |
2517 | * | |
ac27a0ec | 2518 | */ |
678aaf48 | 2519 | static int __ext4_normal_writepage(struct page *page, |
cf108bca JK |
2520 | struct writeback_control *wbc) |
2521 | { | |
2522 | struct inode *inode = page->mapping->host; | |
2523 | ||
2524 | if (test_opt(inode->i_sb, NOBH)) | |
f0e6c985 AK |
2525 | return nobh_writepage(page, |
2526 | ext4_normal_get_block_write, wbc); | |
cf108bca | 2527 | else |
f0e6c985 AK |
2528 | return block_write_full_page(page, |
2529 | ext4_normal_get_block_write, | |
2530 | wbc); | |
cf108bca JK |
2531 | } |
2532 | ||
678aaf48 | 2533 | static int ext4_normal_writepage(struct page *page, |
ac27a0ec DK |
2534 | struct writeback_control *wbc) |
2535 | { | |
2536 | struct inode *inode = page->mapping->host; | |
cf108bca JK |
2537 | loff_t size = i_size_read(inode); |
2538 | loff_t len; | |
2539 | ||
2540 | J_ASSERT(PageLocked(page)); | |
cf108bca JK |
2541 | if (page->index == size >> PAGE_CACHE_SHIFT) |
2542 | len = size & ~PAGE_CACHE_MASK; | |
2543 | else | |
2544 | len = PAGE_CACHE_SIZE; | |
f0e6c985 AK |
2545 | |
2546 | if (page_has_buffers(page)) { | |
2547 | /* if page has buffers it should all be mapped | |
2548 | * and allocated. If there are not buffers attached | |
2549 | * to the page we know the page is dirty but it lost | |
2550 | * buffers. That means that at some moment in time | |
2551 | * after write_begin() / write_end() has been called | |
2552 | * all buffers have been clean and thus they must have been | |
2553 | * written at least once. So they are all mapped and we can | |
2554 | * happily proceed with mapping them and writing the page. | |
2555 | */ | |
2556 | BUG_ON(walk_page_buffers(NULL, page_buffers(page), 0, len, NULL, | |
2557 | ext4_bh_unmapped_or_delay)); | |
2558 | } | |
cf108bca JK |
2559 | |
2560 | if (!ext4_journal_current_handle()) | |
678aaf48 | 2561 | return __ext4_normal_writepage(page, wbc); |
cf108bca JK |
2562 | |
2563 | redirty_page_for_writepage(wbc, page); | |
2564 | unlock_page(page); | |
2565 | return 0; | |
2566 | } | |
2567 | ||
2568 | static int __ext4_journalled_writepage(struct page *page, | |
2569 | struct writeback_control *wbc) | |
2570 | { | |
2571 | struct address_space *mapping = page->mapping; | |
2572 | struct inode *inode = mapping->host; | |
2573 | struct buffer_head *page_bufs; | |
ac27a0ec DK |
2574 | handle_t *handle = NULL; |
2575 | int ret = 0; | |
2576 | int err; | |
2577 | ||
f0e6c985 AK |
2578 | ret = block_prepare_write(page, 0, PAGE_CACHE_SIZE, |
2579 | ext4_normal_get_block_write); | |
cf108bca JK |
2580 | if (ret != 0) |
2581 | goto out_unlock; | |
2582 | ||
2583 | page_bufs = page_buffers(page); | |
2584 | walk_page_buffers(handle, page_bufs, 0, PAGE_CACHE_SIZE, NULL, | |
2585 | bget_one); | |
2586 | /* As soon as we unlock the page, it can go away, but we have | |
2587 | * references to buffers so we are safe */ | |
2588 | unlock_page(page); | |
ac27a0ec | 2589 | |
617ba13b | 2590 | handle = ext4_journal_start(inode, ext4_writepage_trans_blocks(inode)); |
ac27a0ec DK |
2591 | if (IS_ERR(handle)) { |
2592 | ret = PTR_ERR(handle); | |
cf108bca | 2593 | goto out; |
ac27a0ec DK |
2594 | } |
2595 | ||
cf108bca JK |
2596 | ret = walk_page_buffers(handle, page_bufs, 0, |
2597 | PAGE_CACHE_SIZE, NULL, do_journal_get_write_access); | |
ac27a0ec | 2598 | |
cf108bca JK |
2599 | err = walk_page_buffers(handle, page_bufs, 0, |
2600 | PAGE_CACHE_SIZE, NULL, write_end_fn); | |
2601 | if (ret == 0) | |
2602 | ret = err; | |
617ba13b | 2603 | err = ext4_journal_stop(handle); |
ac27a0ec DK |
2604 | if (!ret) |
2605 | ret = err; | |
ac27a0ec | 2606 | |
cf108bca JK |
2607 | walk_page_buffers(handle, page_bufs, 0, |
2608 | PAGE_CACHE_SIZE, NULL, bput_one); | |
2609 | EXT4_I(inode)->i_state |= EXT4_STATE_JDATA; | |
2610 | goto out; | |
2611 | ||
2612 | out_unlock: | |
ac27a0ec | 2613 | unlock_page(page); |
cf108bca | 2614 | out: |
ac27a0ec DK |
2615 | return ret; |
2616 | } | |
2617 | ||
617ba13b | 2618 | static int ext4_journalled_writepage(struct page *page, |
ac27a0ec DK |
2619 | struct writeback_control *wbc) |
2620 | { | |
2621 | struct inode *inode = page->mapping->host; | |
cf108bca JK |
2622 | loff_t size = i_size_read(inode); |
2623 | loff_t len; | |
ac27a0ec | 2624 | |
cf108bca | 2625 | J_ASSERT(PageLocked(page)); |
cf108bca JK |
2626 | if (page->index == size >> PAGE_CACHE_SHIFT) |
2627 | len = size & ~PAGE_CACHE_MASK; | |
2628 | else | |
2629 | len = PAGE_CACHE_SIZE; | |
f0e6c985 AK |
2630 | |
2631 | if (page_has_buffers(page)) { | |
2632 | /* if page has buffers it should all be mapped | |
2633 | * and allocated. If there are not buffers attached | |
2634 | * to the page we know the page is dirty but it lost | |
2635 | * buffers. That means that at some moment in time | |
2636 | * after write_begin() / write_end() has been called | |
2637 | * all buffers have been clean and thus they must have been | |
2638 | * written at least once. So they are all mapped and we can | |
2639 | * happily proceed with mapping them and writing the page. | |
2640 | */ | |
2641 | BUG_ON(walk_page_buffers(NULL, page_buffers(page), 0, len, NULL, | |
2642 | ext4_bh_unmapped_or_delay)); | |
2643 | } | |
ac27a0ec | 2644 | |
cf108bca | 2645 | if (ext4_journal_current_handle()) |
ac27a0ec | 2646 | goto no_write; |
ac27a0ec | 2647 | |
cf108bca | 2648 | if (PageChecked(page)) { |
ac27a0ec DK |
2649 | /* |
2650 | * It's mmapped pagecache. Add buffers and journal it. There | |
2651 | * doesn't seem much point in redirtying the page here. | |
2652 | */ | |
2653 | ClearPageChecked(page); | |
cf108bca | 2654 | return __ext4_journalled_writepage(page, wbc); |
ac27a0ec DK |
2655 | } else { |
2656 | /* | |
2657 | * It may be a page full of checkpoint-mode buffers. We don't | |
2658 | * really know unless we go poke around in the buffer_heads. | |
2659 | * But block_write_full_page will do the right thing. | |
2660 | */ | |
f0e6c985 AK |
2661 | return block_write_full_page(page, |
2662 | ext4_normal_get_block_write, | |
2663 | wbc); | |
ac27a0ec | 2664 | } |
ac27a0ec DK |
2665 | no_write: |
2666 | redirty_page_for_writepage(wbc, page); | |
ac27a0ec | 2667 | unlock_page(page); |
cf108bca | 2668 | return 0; |
ac27a0ec DK |
2669 | } |
2670 | ||
617ba13b | 2671 | static int ext4_readpage(struct file *file, struct page *page) |
ac27a0ec | 2672 | { |
617ba13b | 2673 | return mpage_readpage(page, ext4_get_block); |
ac27a0ec DK |
2674 | } |
2675 | ||
2676 | static int | |
617ba13b | 2677 | ext4_readpages(struct file *file, struct address_space *mapping, |
ac27a0ec DK |
2678 | struct list_head *pages, unsigned nr_pages) |
2679 | { | |
617ba13b | 2680 | return mpage_readpages(mapping, pages, nr_pages, ext4_get_block); |
ac27a0ec DK |
2681 | } |
2682 | ||
617ba13b | 2683 | static void ext4_invalidatepage(struct page *page, unsigned long offset) |
ac27a0ec | 2684 | { |
617ba13b | 2685 | journal_t *journal = EXT4_JOURNAL(page->mapping->host); |
ac27a0ec DK |
2686 | |
2687 | /* | |
2688 | * If it's a full truncate we just forget about the pending dirtying | |
2689 | */ | |
2690 | if (offset == 0) | |
2691 | ClearPageChecked(page); | |
2692 | ||
dab291af | 2693 | jbd2_journal_invalidatepage(journal, page, offset); |
ac27a0ec DK |
2694 | } |
2695 | ||
617ba13b | 2696 | static int ext4_releasepage(struct page *page, gfp_t wait) |
ac27a0ec | 2697 | { |
617ba13b | 2698 | journal_t *journal = EXT4_JOURNAL(page->mapping->host); |
ac27a0ec DK |
2699 | |
2700 | WARN_ON(PageChecked(page)); | |
2701 | if (!page_has_buffers(page)) | |
2702 | return 0; | |
dab291af | 2703 | return jbd2_journal_try_to_free_buffers(journal, page, wait); |
ac27a0ec DK |
2704 | } |
2705 | ||
2706 | /* | |
2707 | * If the O_DIRECT write will extend the file then add this inode to the | |
2708 | * orphan list. So recovery will truncate it back to the original size | |
2709 | * if the machine crashes during the write. | |
2710 | * | |
2711 | * If the O_DIRECT write is intantiating holes inside i_size and the machine | |
7fb5409d JK |
2712 | * crashes then stale disk data _may_ be exposed inside the file. But current |
2713 | * VFS code falls back into buffered path in that case so we are safe. | |
ac27a0ec | 2714 | */ |
617ba13b | 2715 | static ssize_t ext4_direct_IO(int rw, struct kiocb *iocb, |
ac27a0ec DK |
2716 | const struct iovec *iov, loff_t offset, |
2717 | unsigned long nr_segs) | |
2718 | { | |
2719 | struct file *file = iocb->ki_filp; | |
2720 | struct inode *inode = file->f_mapping->host; | |
617ba13b | 2721 | struct ext4_inode_info *ei = EXT4_I(inode); |
7fb5409d | 2722 | handle_t *handle; |
ac27a0ec DK |
2723 | ssize_t ret; |
2724 | int orphan = 0; | |
2725 | size_t count = iov_length(iov, nr_segs); | |
2726 | ||
2727 | if (rw == WRITE) { | |
2728 | loff_t final_size = offset + count; | |
2729 | ||
ac27a0ec | 2730 | if (final_size > inode->i_size) { |
7fb5409d JK |
2731 | /* Credits for sb + inode write */ |
2732 | handle = ext4_journal_start(inode, 2); | |
2733 | if (IS_ERR(handle)) { | |
2734 | ret = PTR_ERR(handle); | |
2735 | goto out; | |
2736 | } | |
617ba13b | 2737 | ret = ext4_orphan_add(handle, inode); |
7fb5409d JK |
2738 | if (ret) { |
2739 | ext4_journal_stop(handle); | |
2740 | goto out; | |
2741 | } | |
ac27a0ec DK |
2742 | orphan = 1; |
2743 | ei->i_disksize = inode->i_size; | |
7fb5409d | 2744 | ext4_journal_stop(handle); |
ac27a0ec DK |
2745 | } |
2746 | } | |
2747 | ||
2748 | ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov, | |
2749 | offset, nr_segs, | |
617ba13b | 2750 | ext4_get_block, NULL); |
ac27a0ec | 2751 | |
7fb5409d | 2752 | if (orphan) { |
ac27a0ec DK |
2753 | int err; |
2754 | ||
7fb5409d JK |
2755 | /* Credits for sb + inode write */ |
2756 | handle = ext4_journal_start(inode, 2); | |
2757 | if (IS_ERR(handle)) { | |
2758 | /* This is really bad luck. We've written the data | |
2759 | * but cannot extend i_size. Bail out and pretend | |
2760 | * the write failed... */ | |
2761 | ret = PTR_ERR(handle); | |
2762 | goto out; | |
2763 | } | |
2764 | if (inode->i_nlink) | |
617ba13b | 2765 | ext4_orphan_del(handle, inode); |
7fb5409d | 2766 | if (ret > 0) { |
ac27a0ec DK |
2767 | loff_t end = offset + ret; |
2768 | if (end > inode->i_size) { | |
2769 | ei->i_disksize = end; | |
2770 | i_size_write(inode, end); | |
2771 | /* | |
2772 | * We're going to return a positive `ret' | |
2773 | * here due to non-zero-length I/O, so there's | |
2774 | * no way of reporting error returns from | |
617ba13b | 2775 | * ext4_mark_inode_dirty() to userspace. So |
ac27a0ec DK |
2776 | * ignore it. |
2777 | */ | |
617ba13b | 2778 | ext4_mark_inode_dirty(handle, inode); |
ac27a0ec DK |
2779 | } |
2780 | } | |
617ba13b | 2781 | err = ext4_journal_stop(handle); |
ac27a0ec DK |
2782 | if (ret == 0) |
2783 | ret = err; | |
2784 | } | |
2785 | out: | |
2786 | return ret; | |
2787 | } | |
2788 | ||
2789 | /* | |
617ba13b | 2790 | * Pages can be marked dirty completely asynchronously from ext4's journalling |
ac27a0ec DK |
2791 | * activity. By filemap_sync_pte(), try_to_unmap_one(), etc. We cannot do |
2792 | * much here because ->set_page_dirty is called under VFS locks. The page is | |
2793 | * not necessarily locked. | |
2794 | * | |
2795 | * We cannot just dirty the page and leave attached buffers clean, because the | |
2796 | * buffers' dirty state is "definitive". We cannot just set the buffers dirty | |
2797 | * or jbddirty because all the journalling code will explode. | |
2798 | * | |
2799 | * So what we do is to mark the page "pending dirty" and next time writepage | |
2800 | * is called, propagate that into the buffers appropriately. | |
2801 | */ | |
617ba13b | 2802 | static int ext4_journalled_set_page_dirty(struct page *page) |
ac27a0ec DK |
2803 | { |
2804 | SetPageChecked(page); | |
2805 | return __set_page_dirty_nobuffers(page); | |
2806 | } | |
2807 | ||
617ba13b MC |
2808 | static const struct address_space_operations ext4_ordered_aops = { |
2809 | .readpage = ext4_readpage, | |
2810 | .readpages = ext4_readpages, | |
678aaf48 | 2811 | .writepage = ext4_normal_writepage, |
ac27a0ec | 2812 | .sync_page = block_sync_page, |
bfc1af65 NP |
2813 | .write_begin = ext4_write_begin, |
2814 | .write_end = ext4_ordered_write_end, | |
617ba13b MC |
2815 | .bmap = ext4_bmap, |
2816 | .invalidatepage = ext4_invalidatepage, | |
2817 | .releasepage = ext4_releasepage, | |
2818 | .direct_IO = ext4_direct_IO, | |
ac27a0ec DK |
2819 | .migratepage = buffer_migrate_page, |
2820 | }; | |
2821 | ||
617ba13b MC |
2822 | static const struct address_space_operations ext4_writeback_aops = { |
2823 | .readpage = ext4_readpage, | |
2824 | .readpages = ext4_readpages, | |
678aaf48 | 2825 | .writepage = ext4_normal_writepage, |
ac27a0ec | 2826 | .sync_page = block_sync_page, |
bfc1af65 NP |
2827 | .write_begin = ext4_write_begin, |
2828 | .write_end = ext4_writeback_write_end, | |
617ba13b MC |
2829 | .bmap = ext4_bmap, |
2830 | .invalidatepage = ext4_invalidatepage, | |
2831 | .releasepage = ext4_releasepage, | |
2832 | .direct_IO = ext4_direct_IO, | |
ac27a0ec DK |
2833 | .migratepage = buffer_migrate_page, |
2834 | }; | |
2835 | ||
617ba13b MC |
2836 | static const struct address_space_operations ext4_journalled_aops = { |
2837 | .readpage = ext4_readpage, | |
2838 | .readpages = ext4_readpages, | |
2839 | .writepage = ext4_journalled_writepage, | |
ac27a0ec | 2840 | .sync_page = block_sync_page, |
bfc1af65 NP |
2841 | .write_begin = ext4_write_begin, |
2842 | .write_end = ext4_journalled_write_end, | |
617ba13b MC |
2843 | .set_page_dirty = ext4_journalled_set_page_dirty, |
2844 | .bmap = ext4_bmap, | |
2845 | .invalidatepage = ext4_invalidatepage, | |
2846 | .releasepage = ext4_releasepage, | |
ac27a0ec DK |
2847 | }; |
2848 | ||
64769240 AT |
2849 | static const struct address_space_operations ext4_da_aops = { |
2850 | .readpage = ext4_readpage, | |
2851 | .readpages = ext4_readpages, | |
2852 | .writepage = ext4_da_writepage, | |
2853 | .writepages = ext4_da_writepages, | |
2854 | .sync_page = block_sync_page, | |
2855 | .write_begin = ext4_da_write_begin, | |
2856 | .write_end = ext4_da_write_end, | |
2857 | .bmap = ext4_bmap, | |
2858 | .invalidatepage = ext4_da_invalidatepage, | |
2859 | .releasepage = ext4_releasepage, | |
2860 | .direct_IO = ext4_direct_IO, | |
2861 | .migratepage = buffer_migrate_page, | |
2862 | }; | |
2863 | ||
617ba13b | 2864 | void ext4_set_aops(struct inode *inode) |
ac27a0ec | 2865 | { |
cd1aac32 AK |
2866 | if (ext4_should_order_data(inode) && |
2867 | test_opt(inode->i_sb, DELALLOC)) | |
2868 | inode->i_mapping->a_ops = &ext4_da_aops; | |
2869 | else if (ext4_should_order_data(inode)) | |
617ba13b | 2870 | inode->i_mapping->a_ops = &ext4_ordered_aops; |
64769240 AT |
2871 | else if (ext4_should_writeback_data(inode) && |
2872 | test_opt(inode->i_sb, DELALLOC)) | |
2873 | inode->i_mapping->a_ops = &ext4_da_aops; | |
617ba13b MC |
2874 | else if (ext4_should_writeback_data(inode)) |
2875 | inode->i_mapping->a_ops = &ext4_writeback_aops; | |
ac27a0ec | 2876 | else |
617ba13b | 2877 | inode->i_mapping->a_ops = &ext4_journalled_aops; |
ac27a0ec DK |
2878 | } |
2879 | ||
2880 | /* | |
617ba13b | 2881 | * ext4_block_truncate_page() zeroes out a mapping from file offset `from' |
ac27a0ec DK |
2882 | * up to the end of the block which corresponds to `from'. |
2883 | * This required during truncate. We need to physically zero the tail end | |
2884 | * of that block so it doesn't yield old data if the file is later grown. | |
2885 | */ | |
cf108bca | 2886 | int ext4_block_truncate_page(handle_t *handle, |
ac27a0ec DK |
2887 | struct address_space *mapping, loff_t from) |
2888 | { | |
617ba13b | 2889 | ext4_fsblk_t index = from >> PAGE_CACHE_SHIFT; |
ac27a0ec | 2890 | unsigned offset = from & (PAGE_CACHE_SIZE-1); |
725d26d3 AK |
2891 | unsigned blocksize, length, pos; |
2892 | ext4_lblk_t iblock; | |
ac27a0ec DK |
2893 | struct inode *inode = mapping->host; |
2894 | struct buffer_head *bh; | |
cf108bca | 2895 | struct page *page; |
ac27a0ec | 2896 | int err = 0; |
ac27a0ec | 2897 | |
cf108bca JK |
2898 | page = grab_cache_page(mapping, from >> PAGE_CACHE_SHIFT); |
2899 | if (!page) | |
2900 | return -EINVAL; | |
2901 | ||
ac27a0ec DK |
2902 | blocksize = inode->i_sb->s_blocksize; |
2903 | length = blocksize - (offset & (blocksize - 1)); | |
2904 | iblock = index << (PAGE_CACHE_SHIFT - inode->i_sb->s_blocksize_bits); | |
2905 | ||
2906 | /* | |
2907 | * For "nobh" option, we can only work if we don't need to | |
2908 | * read-in the page - otherwise we create buffers to do the IO. | |
2909 | */ | |
2910 | if (!page_has_buffers(page) && test_opt(inode->i_sb, NOBH) && | |
617ba13b | 2911 | ext4_should_writeback_data(inode) && PageUptodate(page)) { |
eebd2aa3 | 2912 | zero_user(page, offset, length); |
ac27a0ec DK |
2913 | set_page_dirty(page); |
2914 | goto unlock; | |
2915 | } | |
2916 | ||
2917 | if (!page_has_buffers(page)) | |
2918 | create_empty_buffers(page, blocksize, 0); | |
2919 | ||
2920 | /* Find the buffer that contains "offset" */ | |
2921 | bh = page_buffers(page); | |
2922 | pos = blocksize; | |
2923 | while (offset >= pos) { | |
2924 | bh = bh->b_this_page; | |
2925 | iblock++; | |
2926 | pos += blocksize; | |
2927 | } | |
2928 | ||
2929 | err = 0; | |
2930 | if (buffer_freed(bh)) { | |
2931 | BUFFER_TRACE(bh, "freed: skip"); | |
2932 | goto unlock; | |
2933 | } | |
2934 | ||
2935 | if (!buffer_mapped(bh)) { | |
2936 | BUFFER_TRACE(bh, "unmapped"); | |
617ba13b | 2937 | ext4_get_block(inode, iblock, bh, 0); |
ac27a0ec DK |
2938 | /* unmapped? It's a hole - nothing to do */ |
2939 | if (!buffer_mapped(bh)) { | |
2940 | BUFFER_TRACE(bh, "still unmapped"); | |
2941 | goto unlock; | |
2942 | } | |
2943 | } | |
2944 | ||
2945 | /* Ok, it's mapped. Make sure it's up-to-date */ | |
2946 | if (PageUptodate(page)) | |
2947 | set_buffer_uptodate(bh); | |
2948 | ||
2949 | if (!buffer_uptodate(bh)) { | |
2950 | err = -EIO; | |
2951 | ll_rw_block(READ, 1, &bh); | |
2952 | wait_on_buffer(bh); | |
2953 | /* Uhhuh. Read error. Complain and punt. */ | |
2954 | if (!buffer_uptodate(bh)) | |
2955 | goto unlock; | |
2956 | } | |
2957 | ||
617ba13b | 2958 | if (ext4_should_journal_data(inode)) { |
ac27a0ec | 2959 | BUFFER_TRACE(bh, "get write access"); |
617ba13b | 2960 | err = ext4_journal_get_write_access(handle, bh); |
ac27a0ec DK |
2961 | if (err) |
2962 | goto unlock; | |
2963 | } | |
2964 | ||
eebd2aa3 | 2965 | zero_user(page, offset, length); |
ac27a0ec DK |
2966 | |
2967 | BUFFER_TRACE(bh, "zeroed end of block"); | |
2968 | ||
2969 | err = 0; | |
617ba13b MC |
2970 | if (ext4_should_journal_data(inode)) { |
2971 | err = ext4_journal_dirty_metadata(handle, bh); | |
ac27a0ec | 2972 | } else { |
617ba13b | 2973 | if (ext4_should_order_data(inode)) |
678aaf48 | 2974 | err = ext4_jbd2_file_inode(handle, inode); |
ac27a0ec DK |
2975 | mark_buffer_dirty(bh); |
2976 | } | |
2977 | ||
2978 | unlock: | |
2979 | unlock_page(page); | |
2980 | page_cache_release(page); | |
2981 | return err; | |
2982 | } | |
2983 | ||
2984 | /* | |
2985 | * Probably it should be a library function... search for first non-zero word | |
2986 | * or memcmp with zero_page, whatever is better for particular architecture. | |
2987 | * Linus? | |
2988 | */ | |
2989 | static inline int all_zeroes(__le32 *p, __le32 *q) | |
2990 | { | |
2991 | while (p < q) | |
2992 | if (*p++) | |
2993 | return 0; | |
2994 | return 1; | |
2995 | } | |
2996 | ||
2997 | /** | |
617ba13b | 2998 | * ext4_find_shared - find the indirect blocks for partial truncation. |
ac27a0ec DK |
2999 | * @inode: inode in question |
3000 | * @depth: depth of the affected branch | |
617ba13b | 3001 | * @offsets: offsets of pointers in that branch (see ext4_block_to_path) |
ac27a0ec DK |
3002 | * @chain: place to store the pointers to partial indirect blocks |
3003 | * @top: place to the (detached) top of branch | |
3004 | * | |
617ba13b | 3005 | * This is a helper function used by ext4_truncate(). |
ac27a0ec DK |
3006 | * |
3007 | * When we do truncate() we may have to clean the ends of several | |
3008 | * indirect blocks but leave the blocks themselves alive. Block is | |
3009 | * partially truncated if some data below the new i_size is refered | |
3010 | * from it (and it is on the path to the first completely truncated | |
3011 | * data block, indeed). We have to free the top of that path along | |
3012 | * with everything to the right of the path. Since no allocation | |
617ba13b | 3013 | * past the truncation point is possible until ext4_truncate() |
ac27a0ec DK |
3014 | * finishes, we may safely do the latter, but top of branch may |
3015 | * require special attention - pageout below the truncation point | |
3016 | * might try to populate it. | |
3017 | * | |
3018 | * We atomically detach the top of branch from the tree, store the | |
3019 | * block number of its root in *@top, pointers to buffer_heads of | |
3020 | * partially truncated blocks - in @chain[].bh and pointers to | |
3021 | * their last elements that should not be removed - in | |
3022 | * @chain[].p. Return value is the pointer to last filled element | |
3023 | * of @chain. | |
3024 | * | |
3025 | * The work left to caller to do the actual freeing of subtrees: | |
3026 | * a) free the subtree starting from *@top | |
3027 | * b) free the subtrees whose roots are stored in | |
3028 | * (@chain[i].p+1 .. end of @chain[i].bh->b_data) | |
3029 | * c) free the subtrees growing from the inode past the @chain[0]. | |
3030 | * (no partially truncated stuff there). */ | |
3031 | ||
617ba13b | 3032 | static Indirect *ext4_find_shared(struct inode *inode, int depth, |
725d26d3 | 3033 | ext4_lblk_t offsets[4], Indirect chain[4], __le32 *top) |
ac27a0ec DK |
3034 | { |
3035 | Indirect *partial, *p; | |
3036 | int k, err; | |
3037 | ||
3038 | *top = 0; | |
3039 | /* Make k index the deepest non-null offest + 1 */ | |
3040 | for (k = depth; k > 1 && !offsets[k-1]; k--) | |
3041 | ; | |
617ba13b | 3042 | partial = ext4_get_branch(inode, k, offsets, chain, &err); |
ac27a0ec DK |
3043 | /* Writer: pointers */ |
3044 | if (!partial) | |
3045 | partial = chain + k-1; | |
3046 | /* | |
3047 | * If the branch acquired continuation since we've looked at it - | |
3048 | * fine, it should all survive and (new) top doesn't belong to us. | |
3049 | */ | |
3050 | if (!partial->key && *partial->p) | |
3051 | /* Writer: end */ | |
3052 | goto no_top; | |
3053 | for (p=partial; p>chain && all_zeroes((__le32*)p->bh->b_data,p->p); p--) | |
3054 | ; | |
3055 | /* | |
3056 | * OK, we've found the last block that must survive. The rest of our | |
3057 | * branch should be detached before unlocking. However, if that rest | |
3058 | * of branch is all ours and does not grow immediately from the inode | |
3059 | * it's easier to cheat and just decrement partial->p. | |
3060 | */ | |
3061 | if (p == chain + k - 1 && p > chain) { | |
3062 | p->p--; | |
3063 | } else { | |
3064 | *top = *p->p; | |
617ba13b | 3065 | /* Nope, don't do this in ext4. Must leave the tree intact */ |
ac27a0ec DK |
3066 | #if 0 |
3067 | *p->p = 0; | |
3068 | #endif | |
3069 | } | |
3070 | /* Writer: end */ | |
3071 | ||
3072 | while(partial > p) { | |
3073 | brelse(partial->bh); | |
3074 | partial--; | |
3075 | } | |
3076 | no_top: | |
3077 | return partial; | |
3078 | } | |
3079 | ||
3080 | /* | |
3081 | * Zero a number of block pointers in either an inode or an indirect block. | |
3082 | * If we restart the transaction we must again get write access to the | |
3083 | * indirect block for further modification. | |
3084 | * | |
3085 | * We release `count' blocks on disk, but (last - first) may be greater | |
3086 | * than `count' because there can be holes in there. | |
3087 | */ | |
617ba13b MC |
3088 | static void ext4_clear_blocks(handle_t *handle, struct inode *inode, |
3089 | struct buffer_head *bh, ext4_fsblk_t block_to_free, | |
ac27a0ec DK |
3090 | unsigned long count, __le32 *first, __le32 *last) |
3091 | { | |
3092 | __le32 *p; | |
3093 | if (try_to_extend_transaction(handle, inode)) { | |
3094 | if (bh) { | |
617ba13b MC |
3095 | BUFFER_TRACE(bh, "call ext4_journal_dirty_metadata"); |
3096 | ext4_journal_dirty_metadata(handle, bh); | |
ac27a0ec | 3097 | } |
617ba13b MC |
3098 | ext4_mark_inode_dirty(handle, inode); |
3099 | ext4_journal_test_restart(handle, inode); | |
ac27a0ec DK |
3100 | if (bh) { |
3101 | BUFFER_TRACE(bh, "retaking write access"); | |
617ba13b | 3102 | ext4_journal_get_write_access(handle, bh); |
ac27a0ec DK |
3103 | } |
3104 | } | |
3105 | ||
3106 | /* | |
3107 | * Any buffers which are on the journal will be in memory. We find | |
dab291af | 3108 | * them on the hash table so jbd2_journal_revoke() will run jbd2_journal_forget() |
ac27a0ec | 3109 | * on them. We've already detached each block from the file, so |
dab291af | 3110 | * bforget() in jbd2_journal_forget() should be safe. |
ac27a0ec | 3111 | * |
dab291af | 3112 | * AKPM: turn on bforget in jbd2_journal_forget()!!! |
ac27a0ec DK |
3113 | */ |
3114 | for (p = first; p < last; p++) { | |
3115 | u32 nr = le32_to_cpu(*p); | |
3116 | if (nr) { | |
1d03ec98 | 3117 | struct buffer_head *tbh; |
ac27a0ec DK |
3118 | |
3119 | *p = 0; | |
1d03ec98 AK |
3120 | tbh = sb_find_get_block(inode->i_sb, nr); |
3121 | ext4_forget(handle, 0, inode, tbh, nr); | |
ac27a0ec DK |
3122 | } |
3123 | } | |
3124 | ||
c9de560d | 3125 | ext4_free_blocks(handle, inode, block_to_free, count, 0); |
ac27a0ec DK |
3126 | } |
3127 | ||
3128 | /** | |
617ba13b | 3129 | * ext4_free_data - free a list of data blocks |
ac27a0ec DK |
3130 | * @handle: handle for this transaction |
3131 | * @inode: inode we are dealing with | |
3132 | * @this_bh: indirect buffer_head which contains *@first and *@last | |
3133 | * @first: array of block numbers | |
3134 | * @last: points immediately past the end of array | |
3135 | * | |
3136 | * We are freeing all blocks refered from that array (numbers are stored as | |
3137 | * little-endian 32-bit) and updating @inode->i_blocks appropriately. | |
3138 | * | |
3139 | * We accumulate contiguous runs of blocks to free. Conveniently, if these | |
3140 | * blocks are contiguous then releasing them at one time will only affect one | |
3141 | * or two bitmap blocks (+ group descriptor(s) and superblock) and we won't | |
3142 | * actually use a lot of journal space. | |
3143 | * | |
3144 | * @this_bh will be %NULL if @first and @last point into the inode's direct | |
3145 | * block pointers. | |
3146 | */ | |
617ba13b | 3147 | static void ext4_free_data(handle_t *handle, struct inode *inode, |
ac27a0ec DK |
3148 | struct buffer_head *this_bh, |
3149 | __le32 *first, __le32 *last) | |
3150 | { | |
617ba13b | 3151 | ext4_fsblk_t block_to_free = 0; /* Starting block # of a run */ |
ac27a0ec DK |
3152 | unsigned long count = 0; /* Number of blocks in the run */ |
3153 | __le32 *block_to_free_p = NULL; /* Pointer into inode/ind | |
3154 | corresponding to | |
3155 | block_to_free */ | |
617ba13b | 3156 | ext4_fsblk_t nr; /* Current block # */ |
ac27a0ec DK |
3157 | __le32 *p; /* Pointer into inode/ind |
3158 | for current block */ | |
3159 | int err; | |
3160 | ||
3161 | if (this_bh) { /* For indirect block */ | |
3162 | BUFFER_TRACE(this_bh, "get_write_access"); | |
617ba13b | 3163 | err = ext4_journal_get_write_access(handle, this_bh); |
ac27a0ec DK |
3164 | /* Important: if we can't update the indirect pointers |
3165 | * to the blocks, we can't free them. */ | |
3166 | if (err) | |
3167 | return; | |
3168 | } | |
3169 | ||
3170 | for (p = first; p < last; p++) { | |
3171 | nr = le32_to_cpu(*p); | |
3172 | if (nr) { | |
3173 | /* accumulate blocks to free if they're contiguous */ | |
3174 | if (count == 0) { | |
3175 | block_to_free = nr; | |
3176 | block_to_free_p = p; | |
3177 | count = 1; | |
3178 | } else if (nr == block_to_free + count) { | |
3179 | count++; | |
3180 | } else { | |
617ba13b | 3181 | ext4_clear_blocks(handle, inode, this_bh, |
ac27a0ec DK |
3182 | block_to_free, |
3183 | count, block_to_free_p, p); | |
3184 | block_to_free = nr; | |
3185 | block_to_free_p = p; | |
3186 | count = 1; | |
3187 | } | |
3188 | } | |
3189 | } | |
3190 | ||
3191 | if (count > 0) | |
617ba13b | 3192 | ext4_clear_blocks(handle, inode, this_bh, block_to_free, |
ac27a0ec DK |
3193 | count, block_to_free_p, p); |
3194 | ||
3195 | if (this_bh) { | |
617ba13b | 3196 | BUFFER_TRACE(this_bh, "call ext4_journal_dirty_metadata"); |
71dc8fbc DG |
3197 | |
3198 | /* | |
3199 | * The buffer head should have an attached journal head at this | |
3200 | * point. However, if the data is corrupted and an indirect | |
3201 | * block pointed to itself, it would have been detached when | |
3202 | * the block was cleared. Check for this instead of OOPSing. | |
3203 | */ | |
3204 | if (bh2jh(this_bh)) | |
3205 | ext4_journal_dirty_metadata(handle, this_bh); | |
3206 | else | |
3207 | ext4_error(inode->i_sb, __func__, | |
3208 | "circular indirect block detected, " | |
3209 | "inode=%lu, block=%llu", | |
3210 | inode->i_ino, | |
3211 | (unsigned long long) this_bh->b_blocknr); | |
ac27a0ec DK |
3212 | } |
3213 | } | |
3214 | ||
3215 | /** | |
617ba13b | 3216 | * ext4_free_branches - free an array of branches |
ac27a0ec DK |
3217 | * @handle: JBD handle for this transaction |
3218 | * @inode: inode we are dealing with | |
3219 | * @parent_bh: the buffer_head which contains *@first and *@last | |
3220 | * @first: array of block numbers | |
3221 | * @last: pointer immediately past the end of array | |
3222 | * @depth: depth of the branches to free | |
3223 | * | |
3224 | * We are freeing all blocks refered from these branches (numbers are | |
3225 | * stored as little-endian 32-bit) and updating @inode->i_blocks | |
3226 | * appropriately. | |
3227 | */ | |
617ba13b | 3228 | static void ext4_free_branches(handle_t *handle, struct inode *inode, |
ac27a0ec DK |
3229 | struct buffer_head *parent_bh, |
3230 | __le32 *first, __le32 *last, int depth) | |
3231 | { | |
617ba13b | 3232 | ext4_fsblk_t nr; |
ac27a0ec DK |
3233 | __le32 *p; |
3234 | ||
3235 | if (is_handle_aborted(handle)) | |
3236 | return; | |
3237 | ||
3238 | if (depth--) { | |
3239 | struct buffer_head *bh; | |
617ba13b | 3240 | int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); |
ac27a0ec DK |
3241 | p = last; |
3242 | while (--p >= first) { | |
3243 | nr = le32_to_cpu(*p); | |
3244 | if (!nr) | |
3245 | continue; /* A hole */ | |
3246 | ||
3247 | /* Go read the buffer for the next level down */ | |
3248 | bh = sb_bread(inode->i_sb, nr); | |
3249 | ||
3250 | /* | |
3251 | * A read failure? Report error and clear slot | |
3252 | * (should be rare). | |
3253 | */ | |
3254 | if (!bh) { | |
617ba13b | 3255 | ext4_error(inode->i_sb, "ext4_free_branches", |
2ae02107 | 3256 | "Read failure, inode=%lu, block=%llu", |
ac27a0ec DK |
3257 | inode->i_ino, nr); |
3258 | continue; | |
3259 | } | |
3260 | ||
3261 | /* This zaps the entire block. Bottom up. */ | |
3262 | BUFFER_TRACE(bh, "free child branches"); | |
617ba13b | 3263 | ext4_free_branches(handle, inode, bh, |
ac27a0ec DK |
3264 | (__le32*)bh->b_data, |
3265 | (__le32*)bh->b_data + addr_per_block, | |
3266 | depth); | |
3267 | ||
3268 | /* | |
3269 | * We've probably journalled the indirect block several | |
3270 | * times during the truncate. But it's no longer | |
3271 | * needed and we now drop it from the transaction via | |
dab291af | 3272 | * jbd2_journal_revoke(). |
ac27a0ec DK |
3273 | * |
3274 | * That's easy if it's exclusively part of this | |
3275 | * transaction. But if it's part of the committing | |
dab291af | 3276 | * transaction then jbd2_journal_forget() will simply |
ac27a0ec | 3277 | * brelse() it. That means that if the underlying |
617ba13b | 3278 | * block is reallocated in ext4_get_block(), |
ac27a0ec DK |
3279 | * unmap_underlying_metadata() will find this block |
3280 | * and will try to get rid of it. damn, damn. | |
3281 | * | |
3282 | * If this block has already been committed to the | |
3283 | * journal, a revoke record will be written. And | |
3284 | * revoke records must be emitted *before* clearing | |
3285 | * this block's bit in the bitmaps. | |
3286 | */ | |
617ba13b | 3287 | ext4_forget(handle, 1, inode, bh, bh->b_blocknr); |
ac27a0ec DK |
3288 | |
3289 | /* | |
3290 | * Everything below this this pointer has been | |
3291 | * released. Now let this top-of-subtree go. | |
3292 | * | |
3293 | * We want the freeing of this indirect block to be | |
3294 | * atomic in the journal with the updating of the | |
3295 | * bitmap block which owns it. So make some room in | |
3296 | * the journal. | |
3297 | * | |
3298 | * We zero the parent pointer *after* freeing its | |
3299 | * pointee in the bitmaps, so if extend_transaction() | |
3300 | * for some reason fails to put the bitmap changes and | |
3301 | * the release into the same transaction, recovery | |
3302 | * will merely complain about releasing a free block, | |
3303 | * rather than leaking blocks. | |
3304 | */ | |
3305 | if (is_handle_aborted(handle)) | |
3306 | return; | |
3307 | if (try_to_extend_transaction(handle, inode)) { | |
617ba13b MC |
3308 | ext4_mark_inode_dirty(handle, inode); |
3309 | ext4_journal_test_restart(handle, inode); | |
ac27a0ec DK |
3310 | } |
3311 | ||
c9de560d | 3312 | ext4_free_blocks(handle, inode, nr, 1, 1); |
ac27a0ec DK |
3313 | |
3314 | if (parent_bh) { | |
3315 | /* | |
3316 | * The block which we have just freed is | |
3317 | * pointed to by an indirect block: journal it | |
3318 | */ | |
3319 | BUFFER_TRACE(parent_bh, "get_write_access"); | |
617ba13b | 3320 | if (!ext4_journal_get_write_access(handle, |
ac27a0ec DK |
3321 | parent_bh)){ |
3322 | *p = 0; | |
3323 | BUFFER_TRACE(parent_bh, | |
617ba13b MC |
3324 | "call ext4_journal_dirty_metadata"); |
3325 | ext4_journal_dirty_metadata(handle, | |
ac27a0ec DK |
3326 | parent_bh); |
3327 | } | |
3328 | } | |
3329 | } | |
3330 | } else { | |
3331 | /* We have reached the bottom of the tree. */ | |
3332 | BUFFER_TRACE(parent_bh, "free data blocks"); | |
617ba13b | 3333 | ext4_free_data(handle, inode, parent_bh, first, last); |
ac27a0ec DK |
3334 | } |
3335 | } | |
3336 | ||
91ef4caf DG |
3337 | int ext4_can_truncate(struct inode *inode) |
3338 | { | |
3339 | if (IS_APPEND(inode) || IS_IMMUTABLE(inode)) | |
3340 | return 0; | |
3341 | if (S_ISREG(inode->i_mode)) | |
3342 | return 1; | |
3343 | if (S_ISDIR(inode->i_mode)) | |
3344 | return 1; | |
3345 | if (S_ISLNK(inode->i_mode)) | |
3346 | return !ext4_inode_is_fast_symlink(inode); | |
3347 | return 0; | |
3348 | } | |
3349 | ||
ac27a0ec | 3350 | /* |
617ba13b | 3351 | * ext4_truncate() |
ac27a0ec | 3352 | * |
617ba13b MC |
3353 | * We block out ext4_get_block() block instantiations across the entire |
3354 | * transaction, and VFS/VM ensures that ext4_truncate() cannot run | |
ac27a0ec DK |
3355 | * simultaneously on behalf of the same inode. |
3356 | * | |
3357 | * As we work through the truncate and commmit bits of it to the journal there | |
3358 | * is one core, guiding principle: the file's tree must always be consistent on | |
3359 | * disk. We must be able to restart the truncate after a crash. | |
3360 | * | |
3361 | * The file's tree may be transiently inconsistent in memory (although it | |
3362 | * probably isn't), but whenever we close off and commit a journal transaction, | |
3363 | * the contents of (the filesystem + the journal) must be consistent and | |
3364 | * restartable. It's pretty simple, really: bottom up, right to left (although | |
3365 | * left-to-right works OK too). | |
3366 | * | |
3367 | * Note that at recovery time, journal replay occurs *before* the restart of | |
3368 | * truncate against the orphan inode list. | |
3369 | * | |
3370 | * The committed inode has the new, desired i_size (which is the same as | |
617ba13b | 3371 | * i_disksize in this case). After a crash, ext4_orphan_cleanup() will see |
ac27a0ec | 3372 | * that this inode's truncate did not complete and it will again call |
617ba13b MC |
3373 | * ext4_truncate() to have another go. So there will be instantiated blocks |
3374 | * to the right of the truncation point in a crashed ext4 filesystem. But | |
ac27a0ec | 3375 | * that's fine - as long as they are linked from the inode, the post-crash |
617ba13b | 3376 | * ext4_truncate() run will find them and release them. |
ac27a0ec | 3377 | */ |
617ba13b | 3378 | void ext4_truncate(struct inode *inode) |
ac27a0ec DK |
3379 | { |
3380 | handle_t *handle; | |
617ba13b | 3381 | struct ext4_inode_info *ei = EXT4_I(inode); |
ac27a0ec | 3382 | __le32 *i_data = ei->i_data; |
617ba13b | 3383 | int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); |
ac27a0ec | 3384 | struct address_space *mapping = inode->i_mapping; |
725d26d3 | 3385 | ext4_lblk_t offsets[4]; |
ac27a0ec DK |
3386 | Indirect chain[4]; |
3387 | Indirect *partial; | |
3388 | __le32 nr = 0; | |
3389 | int n; | |
725d26d3 | 3390 | ext4_lblk_t last_block; |
ac27a0ec | 3391 | unsigned blocksize = inode->i_sb->s_blocksize; |
ac27a0ec | 3392 | |
91ef4caf | 3393 | if (!ext4_can_truncate(inode)) |
ac27a0ec DK |
3394 | return; |
3395 | ||
1d03ec98 | 3396 | if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) { |
cf108bca | 3397 | ext4_ext_truncate(inode); |
1d03ec98 AK |
3398 | return; |
3399 | } | |
a86c6181 | 3400 | |
ac27a0ec | 3401 | handle = start_transaction(inode); |
cf108bca | 3402 | if (IS_ERR(handle)) |
ac27a0ec | 3403 | return; /* AKPM: return what? */ |
ac27a0ec DK |
3404 | |
3405 | last_block = (inode->i_size + blocksize-1) | |
617ba13b | 3406 | >> EXT4_BLOCK_SIZE_BITS(inode->i_sb); |
ac27a0ec | 3407 | |
cf108bca JK |
3408 | if (inode->i_size & (blocksize - 1)) |
3409 | if (ext4_block_truncate_page(handle, mapping, inode->i_size)) | |
3410 | goto out_stop; | |
ac27a0ec | 3411 | |
617ba13b | 3412 | n = ext4_block_to_path(inode, last_block, offsets, NULL); |
ac27a0ec DK |
3413 | if (n == 0) |
3414 | goto out_stop; /* error */ | |
3415 | ||
3416 | /* | |
3417 | * OK. This truncate is going to happen. We add the inode to the | |
3418 | * orphan list, so that if this truncate spans multiple transactions, | |
3419 | * and we crash, we will resume the truncate when the filesystem | |
3420 | * recovers. It also marks the inode dirty, to catch the new size. | |
3421 | * | |
3422 | * Implication: the file must always be in a sane, consistent | |
3423 | * truncatable state while each transaction commits. | |
3424 | */ | |
617ba13b | 3425 | if (ext4_orphan_add(handle, inode)) |
ac27a0ec DK |
3426 | goto out_stop; |
3427 | ||
632eaeab MC |
3428 | /* |
3429 | * From here we block out all ext4_get_block() callers who want to | |
3430 | * modify the block allocation tree. | |
3431 | */ | |
3432 | down_write(&ei->i_data_sem); | |
ac27a0ec DK |
3433 | /* |
3434 | * The orphan list entry will now protect us from any crash which | |
3435 | * occurs before the truncate completes, so it is now safe to propagate | |
3436 | * the new, shorter inode size (held for now in i_size) into the | |
3437 | * on-disk inode. We do this via i_disksize, which is the value which | |
617ba13b | 3438 | * ext4 *really* writes onto the disk inode. |
ac27a0ec DK |
3439 | */ |
3440 | ei->i_disksize = inode->i_size; | |
3441 | ||
ac27a0ec | 3442 | if (n == 1) { /* direct blocks */ |
617ba13b MC |
3443 | ext4_free_data(handle, inode, NULL, i_data+offsets[0], |
3444 | i_data + EXT4_NDIR_BLOCKS); | |
ac27a0ec DK |
3445 | goto do_indirects; |
3446 | } | |
3447 | ||
617ba13b | 3448 | partial = ext4_find_shared(inode, n, offsets, chain, &nr); |
ac27a0ec DK |
3449 | /* Kill the top of shared branch (not detached) */ |
3450 | if (nr) { | |
3451 | if (partial == chain) { | |
3452 | /* Shared branch grows from the inode */ | |
617ba13b | 3453 | ext4_free_branches(handle, inode, NULL, |
ac27a0ec DK |
3454 | &nr, &nr+1, (chain+n-1) - partial); |
3455 | *partial->p = 0; | |
3456 | /* | |
3457 | * We mark the inode dirty prior to restart, | |
3458 | * and prior to stop. No need for it here. | |
3459 | */ | |
3460 | } else { | |
3461 | /* Shared branch grows from an indirect block */ | |
3462 | BUFFER_TRACE(partial->bh, "get_write_access"); | |
617ba13b | 3463 | ext4_free_branches(handle, inode, partial->bh, |
ac27a0ec DK |
3464 | partial->p, |
3465 | partial->p+1, (chain+n-1) - partial); | |
3466 | } | |
3467 | } | |
3468 | /* Clear the ends of indirect blocks on the shared branch */ | |
3469 | while (partial > chain) { | |
617ba13b | 3470 | ext4_free_branches(handle, inode, partial->bh, partial->p + 1, |
ac27a0ec DK |
3471 | (__le32*)partial->bh->b_data+addr_per_block, |
3472 | (chain+n-1) - partial); | |
3473 | BUFFER_TRACE(partial->bh, "call brelse"); | |
3474 | brelse (partial->bh); | |
3475 | partial--; | |
3476 | } | |
3477 | do_indirects: | |
3478 | /* Kill the remaining (whole) subtrees */ | |
3479 | switch (offsets[0]) { | |
3480 | default: | |
617ba13b | 3481 | nr = i_data[EXT4_IND_BLOCK]; |
ac27a0ec | 3482 | if (nr) { |
617ba13b MC |
3483 | ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 1); |
3484 | i_data[EXT4_IND_BLOCK] = 0; | |
ac27a0ec | 3485 | } |
617ba13b MC |
3486 | case EXT4_IND_BLOCK: |
3487 | nr = i_data[EXT4_DIND_BLOCK]; | |
ac27a0ec | 3488 | if (nr) { |
617ba13b MC |
3489 | ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 2); |
3490 | i_data[EXT4_DIND_BLOCK] = 0; | |
ac27a0ec | 3491 | } |
617ba13b MC |
3492 | case EXT4_DIND_BLOCK: |
3493 | nr = i_data[EXT4_TIND_BLOCK]; | |
ac27a0ec | 3494 | if (nr) { |
617ba13b MC |
3495 | ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 3); |
3496 | i_data[EXT4_TIND_BLOCK] = 0; | |
ac27a0ec | 3497 | } |
617ba13b | 3498 | case EXT4_TIND_BLOCK: |
ac27a0ec DK |
3499 | ; |
3500 | } | |
3501 | ||
617ba13b | 3502 | ext4_discard_reservation(inode); |
ac27a0ec | 3503 | |
0e855ac8 | 3504 | up_write(&ei->i_data_sem); |
ef7f3835 | 3505 | inode->i_mtime = inode->i_ctime = ext4_current_time(inode); |
617ba13b | 3506 | ext4_mark_inode_dirty(handle, inode); |
ac27a0ec DK |
3507 | |
3508 | /* | |
3509 | * In a multi-transaction truncate, we only make the final transaction | |
3510 | * synchronous | |
3511 | */ | |
3512 | if (IS_SYNC(inode)) | |
3513 | handle->h_sync = 1; | |
3514 | out_stop: | |
3515 | /* | |
3516 | * If this was a simple ftruncate(), and the file will remain alive | |
3517 | * then we need to clear up the orphan record which we created above. | |
3518 | * However, if this was a real unlink then we were called by | |
617ba13b | 3519 | * ext4_delete_inode(), and we allow that function to clean up the |
ac27a0ec DK |
3520 | * orphan info for us. |
3521 | */ | |
3522 | if (inode->i_nlink) | |
617ba13b | 3523 | ext4_orphan_del(handle, inode); |
ac27a0ec | 3524 | |
617ba13b | 3525 | ext4_journal_stop(handle); |
ac27a0ec DK |
3526 | } |
3527 | ||
617ba13b MC |
3528 | static ext4_fsblk_t ext4_get_inode_block(struct super_block *sb, |
3529 | unsigned long ino, struct ext4_iloc *iloc) | |
ac27a0ec | 3530 | { |
fd2d4291 | 3531 | ext4_group_t block_group; |
ac27a0ec | 3532 | unsigned long offset; |
617ba13b | 3533 | ext4_fsblk_t block; |
c0a4ef38 | 3534 | struct ext4_group_desc *gdp; |
ac27a0ec | 3535 | |
617ba13b | 3536 | if (!ext4_valid_inum(sb, ino)) { |
ac27a0ec DK |
3537 | /* |
3538 | * This error is already checked for in namei.c unless we are | |
3539 | * looking at an NFS filehandle, in which case no error | |
3540 | * report is needed | |
3541 | */ | |
3542 | return 0; | |
3543 | } | |
3544 | ||
617ba13b | 3545 | block_group = (ino - 1) / EXT4_INODES_PER_GROUP(sb); |
c0a4ef38 AM |
3546 | gdp = ext4_get_group_desc(sb, block_group, NULL); |
3547 | if (!gdp) | |
ac27a0ec | 3548 | return 0; |
ac27a0ec | 3549 | |
ac27a0ec DK |
3550 | /* |
3551 | * Figure out the offset within the block group inode table | |
3552 | */ | |
617ba13b MC |
3553 | offset = ((ino - 1) % EXT4_INODES_PER_GROUP(sb)) * |
3554 | EXT4_INODE_SIZE(sb); | |
8fadc143 AR |
3555 | block = ext4_inode_table(sb, gdp) + |
3556 | (offset >> EXT4_BLOCK_SIZE_BITS(sb)); | |
ac27a0ec DK |
3557 | |
3558 | iloc->block_group = block_group; | |
617ba13b | 3559 | iloc->offset = offset & (EXT4_BLOCK_SIZE(sb) - 1); |
ac27a0ec DK |
3560 | return block; |
3561 | } | |
3562 | ||
3563 | /* | |
617ba13b | 3564 | * ext4_get_inode_loc returns with an extra refcount against the inode's |
ac27a0ec DK |
3565 | * underlying buffer_head on success. If 'in_mem' is true, we have all |
3566 | * data in memory that is needed to recreate the on-disk version of this | |
3567 | * inode. | |
3568 | */ | |
617ba13b MC |
3569 | static int __ext4_get_inode_loc(struct inode *inode, |
3570 | struct ext4_iloc *iloc, int in_mem) | |
ac27a0ec | 3571 | { |
617ba13b | 3572 | ext4_fsblk_t block; |
ac27a0ec DK |
3573 | struct buffer_head *bh; |
3574 | ||
617ba13b | 3575 | block = ext4_get_inode_block(inode->i_sb, inode->i_ino, iloc); |
ac27a0ec DK |
3576 | if (!block) |
3577 | return -EIO; | |
3578 | ||
3579 | bh = sb_getblk(inode->i_sb, block); | |
3580 | if (!bh) { | |
617ba13b | 3581 | ext4_error (inode->i_sb, "ext4_get_inode_loc", |
ac27a0ec | 3582 | "unable to read inode block - " |
2ae02107 | 3583 | "inode=%lu, block=%llu", |
ac27a0ec DK |
3584 | inode->i_ino, block); |
3585 | return -EIO; | |
3586 | } | |
3587 | if (!buffer_uptodate(bh)) { | |
3588 | lock_buffer(bh); | |
3589 | if (buffer_uptodate(bh)) { | |
3590 | /* someone brought it uptodate while we waited */ | |
3591 | unlock_buffer(bh); | |
3592 | goto has_buffer; | |
3593 | } | |
3594 | ||
3595 | /* | |
3596 | * If we have all information of the inode in memory and this | |
3597 | * is the only valid inode in the block, we need not read the | |
3598 | * block. | |
3599 | */ | |
3600 | if (in_mem) { | |
3601 | struct buffer_head *bitmap_bh; | |
617ba13b | 3602 | struct ext4_group_desc *desc; |
ac27a0ec DK |
3603 | int inodes_per_buffer; |
3604 | int inode_offset, i; | |
fd2d4291 | 3605 | ext4_group_t block_group; |
ac27a0ec DK |
3606 | int start; |
3607 | ||
3608 | block_group = (inode->i_ino - 1) / | |
617ba13b | 3609 | EXT4_INODES_PER_GROUP(inode->i_sb); |
ac27a0ec | 3610 | inodes_per_buffer = bh->b_size / |
617ba13b | 3611 | EXT4_INODE_SIZE(inode->i_sb); |
ac27a0ec | 3612 | inode_offset = ((inode->i_ino - 1) % |
617ba13b | 3613 | EXT4_INODES_PER_GROUP(inode->i_sb)); |
ac27a0ec DK |
3614 | start = inode_offset & ~(inodes_per_buffer - 1); |
3615 | ||
3616 | /* Is the inode bitmap in cache? */ | |
617ba13b | 3617 | desc = ext4_get_group_desc(inode->i_sb, |
ac27a0ec DK |
3618 | block_group, NULL); |
3619 | if (!desc) | |
3620 | goto make_io; | |
3621 | ||
3622 | bitmap_bh = sb_getblk(inode->i_sb, | |
8fadc143 | 3623 | ext4_inode_bitmap(inode->i_sb, desc)); |
ac27a0ec DK |
3624 | if (!bitmap_bh) |
3625 | goto make_io; | |
3626 | ||
3627 | /* | |
3628 | * If the inode bitmap isn't in cache then the | |
3629 | * optimisation may end up performing two reads instead | |
3630 | * of one, so skip it. | |
3631 | */ | |
3632 | if (!buffer_uptodate(bitmap_bh)) { | |
3633 | brelse(bitmap_bh); | |
3634 | goto make_io; | |
3635 | } | |
3636 | for (i = start; i < start + inodes_per_buffer; i++) { | |
3637 | if (i == inode_offset) | |
3638 | continue; | |
617ba13b | 3639 | if (ext4_test_bit(i, bitmap_bh->b_data)) |
ac27a0ec DK |
3640 | break; |
3641 | } | |
3642 | brelse(bitmap_bh); | |
3643 | if (i == start + inodes_per_buffer) { | |
3644 | /* all other inodes are free, so skip I/O */ | |
3645 | memset(bh->b_data, 0, bh->b_size); | |
3646 | set_buffer_uptodate(bh); | |
3647 | unlock_buffer(bh); | |
3648 | goto has_buffer; | |
3649 | } | |
3650 | } | |
3651 | ||
3652 | make_io: | |
3653 | /* | |
3654 | * There are other valid inodes in the buffer, this inode | |
3655 | * has in-inode xattrs, or we don't have this inode in memory. | |
3656 | * Read the block from disk. | |
3657 | */ | |
3658 | get_bh(bh); | |
3659 | bh->b_end_io = end_buffer_read_sync; | |
3660 | submit_bh(READ_META, bh); | |
3661 | wait_on_buffer(bh); | |
3662 | if (!buffer_uptodate(bh)) { | |
617ba13b | 3663 | ext4_error(inode->i_sb, "ext4_get_inode_loc", |
ac27a0ec | 3664 | "unable to read inode block - " |
2ae02107 | 3665 | "inode=%lu, block=%llu", |
ac27a0ec DK |
3666 | inode->i_ino, block); |
3667 | brelse(bh); | |
3668 | return -EIO; | |
3669 | } | |
3670 | } | |
3671 | has_buffer: | |
3672 | iloc->bh = bh; | |
3673 | return 0; | |
3674 | } | |
3675 | ||
617ba13b | 3676 | int ext4_get_inode_loc(struct inode *inode, struct ext4_iloc *iloc) |
ac27a0ec DK |
3677 | { |
3678 | /* We have all inode data except xattrs in memory here. */ | |
617ba13b MC |
3679 | return __ext4_get_inode_loc(inode, iloc, |
3680 | !(EXT4_I(inode)->i_state & EXT4_STATE_XATTR)); | |
ac27a0ec DK |
3681 | } |
3682 | ||
617ba13b | 3683 | void ext4_set_inode_flags(struct inode *inode) |
ac27a0ec | 3684 | { |
617ba13b | 3685 | unsigned int flags = EXT4_I(inode)->i_flags; |
ac27a0ec DK |
3686 | |
3687 | inode->i_flags &= ~(S_SYNC|S_APPEND|S_IMMUTABLE|S_NOATIME|S_DIRSYNC); | |
617ba13b | 3688 | if (flags & EXT4_SYNC_FL) |
ac27a0ec | 3689 | inode->i_flags |= S_SYNC; |
617ba13b | 3690 | if (flags & EXT4_APPEND_FL) |
ac27a0ec | 3691 | inode->i_flags |= S_APPEND; |
617ba13b | 3692 | if (flags & EXT4_IMMUTABLE_FL) |
ac27a0ec | 3693 | inode->i_flags |= S_IMMUTABLE; |
617ba13b | 3694 | if (flags & EXT4_NOATIME_FL) |
ac27a0ec | 3695 | inode->i_flags |= S_NOATIME; |
617ba13b | 3696 | if (flags & EXT4_DIRSYNC_FL) |
ac27a0ec DK |
3697 | inode->i_flags |= S_DIRSYNC; |
3698 | } | |
3699 | ||
ff9ddf7e JK |
3700 | /* Propagate flags from i_flags to EXT4_I(inode)->i_flags */ |
3701 | void ext4_get_inode_flags(struct ext4_inode_info *ei) | |
3702 | { | |
3703 | unsigned int flags = ei->vfs_inode.i_flags; | |
3704 | ||
3705 | ei->i_flags &= ~(EXT4_SYNC_FL|EXT4_APPEND_FL| | |
3706 | EXT4_IMMUTABLE_FL|EXT4_NOATIME_FL|EXT4_DIRSYNC_FL); | |
3707 | if (flags & S_SYNC) | |
3708 | ei->i_flags |= EXT4_SYNC_FL; | |
3709 | if (flags & S_APPEND) | |
3710 | ei->i_flags |= EXT4_APPEND_FL; | |
3711 | if (flags & S_IMMUTABLE) | |
3712 | ei->i_flags |= EXT4_IMMUTABLE_FL; | |
3713 | if (flags & S_NOATIME) | |
3714 | ei->i_flags |= EXT4_NOATIME_FL; | |
3715 | if (flags & S_DIRSYNC) | |
3716 | ei->i_flags |= EXT4_DIRSYNC_FL; | |
3717 | } | |
0fc1b451 AK |
3718 | static blkcnt_t ext4_inode_blocks(struct ext4_inode *raw_inode, |
3719 | struct ext4_inode_info *ei) | |
3720 | { | |
3721 | blkcnt_t i_blocks ; | |
8180a562 AK |
3722 | struct inode *inode = &(ei->vfs_inode); |
3723 | struct super_block *sb = inode->i_sb; | |
0fc1b451 AK |
3724 | |
3725 | if (EXT4_HAS_RO_COMPAT_FEATURE(sb, | |
3726 | EXT4_FEATURE_RO_COMPAT_HUGE_FILE)) { | |
3727 | /* we are using combined 48 bit field */ | |
3728 | i_blocks = ((u64)le16_to_cpu(raw_inode->i_blocks_high)) << 32 | | |
3729 | le32_to_cpu(raw_inode->i_blocks_lo); | |
8180a562 AK |
3730 | if (ei->i_flags & EXT4_HUGE_FILE_FL) { |
3731 | /* i_blocks represent file system block size */ | |
3732 | return i_blocks << (inode->i_blkbits - 9); | |
3733 | } else { | |
3734 | return i_blocks; | |
3735 | } | |
0fc1b451 AK |
3736 | } else { |
3737 | return le32_to_cpu(raw_inode->i_blocks_lo); | |
3738 | } | |
3739 | } | |
ff9ddf7e | 3740 | |
1d1fe1ee | 3741 | struct inode *ext4_iget(struct super_block *sb, unsigned long ino) |
ac27a0ec | 3742 | { |
617ba13b MC |
3743 | struct ext4_iloc iloc; |
3744 | struct ext4_inode *raw_inode; | |
1d1fe1ee | 3745 | struct ext4_inode_info *ei; |
ac27a0ec | 3746 | struct buffer_head *bh; |
1d1fe1ee DH |
3747 | struct inode *inode; |
3748 | long ret; | |
ac27a0ec DK |
3749 | int block; |
3750 | ||
1d1fe1ee DH |
3751 | inode = iget_locked(sb, ino); |
3752 | if (!inode) | |
3753 | return ERR_PTR(-ENOMEM); | |
3754 | if (!(inode->i_state & I_NEW)) | |
3755 | return inode; | |
3756 | ||
3757 | ei = EXT4_I(inode); | |
617ba13b MC |
3758 | #ifdef CONFIG_EXT4DEV_FS_POSIX_ACL |
3759 | ei->i_acl = EXT4_ACL_NOT_CACHED; | |
3760 | ei->i_default_acl = EXT4_ACL_NOT_CACHED; | |
ac27a0ec DK |
3761 | #endif |
3762 | ei->i_block_alloc_info = NULL; | |
3763 | ||
1d1fe1ee DH |
3764 | ret = __ext4_get_inode_loc(inode, &iloc, 0); |
3765 | if (ret < 0) | |
ac27a0ec DK |
3766 | goto bad_inode; |
3767 | bh = iloc.bh; | |
617ba13b | 3768 | raw_inode = ext4_raw_inode(&iloc); |
ac27a0ec DK |
3769 | inode->i_mode = le16_to_cpu(raw_inode->i_mode); |
3770 | inode->i_uid = (uid_t)le16_to_cpu(raw_inode->i_uid_low); | |
3771 | inode->i_gid = (gid_t)le16_to_cpu(raw_inode->i_gid_low); | |
3772 | if(!(test_opt (inode->i_sb, NO_UID32))) { | |
3773 | inode->i_uid |= le16_to_cpu(raw_inode->i_uid_high) << 16; | |
3774 | inode->i_gid |= le16_to_cpu(raw_inode->i_gid_high) << 16; | |
3775 | } | |
3776 | inode->i_nlink = le16_to_cpu(raw_inode->i_links_count); | |
ac27a0ec DK |
3777 | |
3778 | ei->i_state = 0; | |
3779 | ei->i_dir_start_lookup = 0; | |
3780 | ei->i_dtime = le32_to_cpu(raw_inode->i_dtime); | |
3781 | /* We now have enough fields to check if the inode was active or not. | |
3782 | * This is needed because nfsd might try to access dead inodes | |
3783 | * the test is that same one that e2fsck uses | |
3784 | * NeilBrown 1999oct15 | |
3785 | */ | |
3786 | if (inode->i_nlink == 0) { | |
3787 | if (inode->i_mode == 0 || | |
617ba13b | 3788 | !(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_ORPHAN_FS)) { |
ac27a0ec DK |
3789 | /* this inode is deleted */ |
3790 | brelse (bh); | |
1d1fe1ee | 3791 | ret = -ESTALE; |
ac27a0ec DK |
3792 | goto bad_inode; |
3793 | } | |
3794 | /* The only unlinked inodes we let through here have | |
3795 | * valid i_mode and are being read by the orphan | |
3796 | * recovery code: that's fine, we're about to complete | |
3797 | * the process of deleting those. */ | |
3798 | } | |
ac27a0ec | 3799 | ei->i_flags = le32_to_cpu(raw_inode->i_flags); |
0fc1b451 | 3800 | inode->i_blocks = ext4_inode_blocks(raw_inode, ei); |
7973c0c1 | 3801 | ei->i_file_acl = le32_to_cpu(raw_inode->i_file_acl_lo); |
9b8f1f01 | 3802 | if (EXT4_SB(inode->i_sb)->s_es->s_creator_os != |
a48380f7 | 3803 | cpu_to_le32(EXT4_OS_HURD)) { |
a1ddeb7e BP |
3804 | ei->i_file_acl |= |
3805 | ((__u64)le16_to_cpu(raw_inode->i_file_acl_high)) << 32; | |
ac27a0ec | 3806 | } |
a48380f7 | 3807 | inode->i_size = ext4_isize(raw_inode); |
ac27a0ec DK |
3808 | ei->i_disksize = inode->i_size; |
3809 | inode->i_generation = le32_to_cpu(raw_inode->i_generation); | |
3810 | ei->i_block_group = iloc.block_group; | |
3811 | /* | |
3812 | * NOTE! The in-memory inode i_data array is in little-endian order | |
3813 | * even on big-endian machines: we do NOT byteswap the block numbers! | |
3814 | */ | |
617ba13b | 3815 | for (block = 0; block < EXT4_N_BLOCKS; block++) |
ac27a0ec DK |
3816 | ei->i_data[block] = raw_inode->i_block[block]; |
3817 | INIT_LIST_HEAD(&ei->i_orphan); | |
3818 | ||
0040d987 | 3819 | if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE) { |
ac27a0ec | 3820 | ei->i_extra_isize = le16_to_cpu(raw_inode->i_extra_isize); |
617ba13b | 3821 | if (EXT4_GOOD_OLD_INODE_SIZE + ei->i_extra_isize > |
e5d2861f KK |
3822 | EXT4_INODE_SIZE(inode->i_sb)) { |
3823 | brelse (bh); | |
1d1fe1ee | 3824 | ret = -EIO; |
ac27a0ec | 3825 | goto bad_inode; |
e5d2861f | 3826 | } |
ac27a0ec DK |
3827 | if (ei->i_extra_isize == 0) { |
3828 | /* The extra space is currently unused. Use it. */ | |
617ba13b MC |
3829 | ei->i_extra_isize = sizeof(struct ext4_inode) - |
3830 | EXT4_GOOD_OLD_INODE_SIZE; | |
ac27a0ec DK |
3831 | } else { |
3832 | __le32 *magic = (void *)raw_inode + | |
617ba13b | 3833 | EXT4_GOOD_OLD_INODE_SIZE + |
ac27a0ec | 3834 | ei->i_extra_isize; |
617ba13b MC |
3835 | if (*magic == cpu_to_le32(EXT4_XATTR_MAGIC)) |
3836 | ei->i_state |= EXT4_STATE_XATTR; | |
ac27a0ec DK |
3837 | } |
3838 | } else | |
3839 | ei->i_extra_isize = 0; | |
3840 | ||
ef7f3835 KS |
3841 | EXT4_INODE_GET_XTIME(i_ctime, inode, raw_inode); |
3842 | EXT4_INODE_GET_XTIME(i_mtime, inode, raw_inode); | |
3843 | EXT4_INODE_GET_XTIME(i_atime, inode, raw_inode); | |
3844 | EXT4_EINODE_GET_XTIME(i_crtime, ei, raw_inode); | |
3845 | ||
25ec56b5 JNC |
3846 | inode->i_version = le32_to_cpu(raw_inode->i_disk_version); |
3847 | if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE) { | |
3848 | if (EXT4_FITS_IN_INODE(raw_inode, ei, i_version_hi)) | |
3849 | inode->i_version |= | |
3850 | (__u64)(le32_to_cpu(raw_inode->i_version_hi)) << 32; | |
3851 | } | |
3852 | ||
ac27a0ec | 3853 | if (S_ISREG(inode->i_mode)) { |
617ba13b MC |
3854 | inode->i_op = &ext4_file_inode_operations; |
3855 | inode->i_fop = &ext4_file_operations; | |
3856 | ext4_set_aops(inode); | |
ac27a0ec | 3857 | } else if (S_ISDIR(inode->i_mode)) { |
617ba13b MC |
3858 | inode->i_op = &ext4_dir_inode_operations; |
3859 | inode->i_fop = &ext4_dir_operations; | |
ac27a0ec | 3860 | } else if (S_ISLNK(inode->i_mode)) { |
617ba13b MC |
3861 | if (ext4_inode_is_fast_symlink(inode)) |
3862 | inode->i_op = &ext4_fast_symlink_inode_operations; | |
ac27a0ec | 3863 | else { |
617ba13b MC |
3864 | inode->i_op = &ext4_symlink_inode_operations; |
3865 | ext4_set_aops(inode); | |
ac27a0ec DK |
3866 | } |
3867 | } else { | |
617ba13b | 3868 | inode->i_op = &ext4_special_inode_operations; |
ac27a0ec DK |
3869 | if (raw_inode->i_block[0]) |
3870 | init_special_inode(inode, inode->i_mode, | |
3871 | old_decode_dev(le32_to_cpu(raw_inode->i_block[0]))); | |
3872 | else | |
3873 | init_special_inode(inode, inode->i_mode, | |
3874 | new_decode_dev(le32_to_cpu(raw_inode->i_block[1]))); | |
3875 | } | |
3876 | brelse (iloc.bh); | |
617ba13b | 3877 | ext4_set_inode_flags(inode); |
1d1fe1ee DH |
3878 | unlock_new_inode(inode); |
3879 | return inode; | |
ac27a0ec DK |
3880 | |
3881 | bad_inode: | |
1d1fe1ee DH |
3882 | iget_failed(inode); |
3883 | return ERR_PTR(ret); | |
ac27a0ec DK |
3884 | } |
3885 | ||
0fc1b451 AK |
3886 | static int ext4_inode_blocks_set(handle_t *handle, |
3887 | struct ext4_inode *raw_inode, | |
3888 | struct ext4_inode_info *ei) | |
3889 | { | |
3890 | struct inode *inode = &(ei->vfs_inode); | |
3891 | u64 i_blocks = inode->i_blocks; | |
3892 | struct super_block *sb = inode->i_sb; | |
3893 | int err = 0; | |
3894 | ||
3895 | if (i_blocks <= ~0U) { | |
3896 | /* | |
3897 | * i_blocks can be represnted in a 32 bit variable | |
3898 | * as multiple of 512 bytes | |
3899 | */ | |
8180a562 | 3900 | raw_inode->i_blocks_lo = cpu_to_le32(i_blocks); |
0fc1b451 | 3901 | raw_inode->i_blocks_high = 0; |
8180a562 | 3902 | ei->i_flags &= ~EXT4_HUGE_FILE_FL; |
0fc1b451 AK |
3903 | } else if (i_blocks <= 0xffffffffffffULL) { |
3904 | /* | |
3905 | * i_blocks can be represented in a 48 bit variable | |
3906 | * as multiple of 512 bytes | |
3907 | */ | |
3908 | err = ext4_update_rocompat_feature(handle, sb, | |
3909 | EXT4_FEATURE_RO_COMPAT_HUGE_FILE); | |
3910 | if (err) | |
3911 | goto err_out; | |
3912 | /* i_block is stored in the split 48 bit fields */ | |
8180a562 | 3913 | raw_inode->i_blocks_lo = cpu_to_le32(i_blocks); |
0fc1b451 | 3914 | raw_inode->i_blocks_high = cpu_to_le16(i_blocks >> 32); |
8180a562 | 3915 | ei->i_flags &= ~EXT4_HUGE_FILE_FL; |
0fc1b451 | 3916 | } else { |
8180a562 AK |
3917 | /* |
3918 | * i_blocks should be represented in a 48 bit variable | |
3919 | * as multiple of file system block size | |
3920 | */ | |
3921 | err = ext4_update_rocompat_feature(handle, sb, | |
3922 | EXT4_FEATURE_RO_COMPAT_HUGE_FILE); | |
3923 | if (err) | |
3924 | goto err_out; | |
3925 | ei->i_flags |= EXT4_HUGE_FILE_FL; | |
3926 | /* i_block is stored in file system block size */ | |
3927 | i_blocks = i_blocks >> (inode->i_blkbits - 9); | |
3928 | raw_inode->i_blocks_lo = cpu_to_le32(i_blocks); | |
3929 | raw_inode->i_blocks_high = cpu_to_le16(i_blocks >> 32); | |
0fc1b451 AK |
3930 | } |
3931 | err_out: | |
3932 | return err; | |
3933 | } | |
3934 | ||
ac27a0ec DK |
3935 | /* |
3936 | * Post the struct inode info into an on-disk inode location in the | |
3937 | * buffer-cache. This gobbles the caller's reference to the | |
3938 | * buffer_head in the inode location struct. | |
3939 | * | |
3940 | * The caller must have write access to iloc->bh. | |
3941 | */ | |
617ba13b | 3942 | static int ext4_do_update_inode(handle_t *handle, |
ac27a0ec | 3943 | struct inode *inode, |
617ba13b | 3944 | struct ext4_iloc *iloc) |
ac27a0ec | 3945 | { |
617ba13b MC |
3946 | struct ext4_inode *raw_inode = ext4_raw_inode(iloc); |
3947 | struct ext4_inode_info *ei = EXT4_I(inode); | |
ac27a0ec DK |
3948 | struct buffer_head *bh = iloc->bh; |
3949 | int err = 0, rc, block; | |
3950 | ||
3951 | /* For fields not not tracking in the in-memory inode, | |
3952 | * initialise them to zero for new inodes. */ | |
617ba13b MC |
3953 | if (ei->i_state & EXT4_STATE_NEW) |
3954 | memset(raw_inode, 0, EXT4_SB(inode->i_sb)->s_inode_size); | |
ac27a0ec | 3955 | |
ff9ddf7e | 3956 | ext4_get_inode_flags(ei); |
ac27a0ec DK |
3957 | raw_inode->i_mode = cpu_to_le16(inode->i_mode); |
3958 | if(!(test_opt(inode->i_sb, NO_UID32))) { | |
3959 | raw_inode->i_uid_low = cpu_to_le16(low_16_bits(inode->i_uid)); | |
3960 | raw_inode->i_gid_low = cpu_to_le16(low_16_bits(inode->i_gid)); | |
3961 | /* | |
3962 | * Fix up interoperability with old kernels. Otherwise, old inodes get | |
3963 | * re-used with the upper 16 bits of the uid/gid intact | |
3964 | */ | |
3965 | if(!ei->i_dtime) { | |
3966 | raw_inode->i_uid_high = | |
3967 | cpu_to_le16(high_16_bits(inode->i_uid)); | |
3968 | raw_inode->i_gid_high = | |
3969 | cpu_to_le16(high_16_bits(inode->i_gid)); | |
3970 | } else { | |
3971 | raw_inode->i_uid_high = 0; | |
3972 | raw_inode->i_gid_high = 0; | |
3973 | } | |
3974 | } else { | |
3975 | raw_inode->i_uid_low = | |
3976 | cpu_to_le16(fs_high2lowuid(inode->i_uid)); | |
3977 | raw_inode->i_gid_low = | |
3978 | cpu_to_le16(fs_high2lowgid(inode->i_gid)); | |
3979 | raw_inode->i_uid_high = 0; | |
3980 | raw_inode->i_gid_high = 0; | |
3981 | } | |
3982 | raw_inode->i_links_count = cpu_to_le16(inode->i_nlink); | |
ef7f3835 KS |
3983 | |
3984 | EXT4_INODE_SET_XTIME(i_ctime, inode, raw_inode); | |
3985 | EXT4_INODE_SET_XTIME(i_mtime, inode, raw_inode); | |
3986 | EXT4_INODE_SET_XTIME(i_atime, inode, raw_inode); | |
3987 | EXT4_EINODE_SET_XTIME(i_crtime, ei, raw_inode); | |
3988 | ||
0fc1b451 AK |
3989 | if (ext4_inode_blocks_set(handle, raw_inode, ei)) |
3990 | goto out_brelse; | |
ac27a0ec | 3991 | raw_inode->i_dtime = cpu_to_le32(ei->i_dtime); |
267e4db9 AK |
3992 | /* clear the migrate flag in the raw_inode */ |
3993 | raw_inode->i_flags = cpu_to_le32(ei->i_flags & ~EXT4_EXT_MIGRATE); | |
9b8f1f01 MC |
3994 | if (EXT4_SB(inode->i_sb)->s_es->s_creator_os != |
3995 | cpu_to_le32(EXT4_OS_HURD)) | |
a1ddeb7e BP |
3996 | raw_inode->i_file_acl_high = |
3997 | cpu_to_le16(ei->i_file_acl >> 32); | |
7973c0c1 | 3998 | raw_inode->i_file_acl_lo = cpu_to_le32(ei->i_file_acl); |
a48380f7 AK |
3999 | ext4_isize_set(raw_inode, ei->i_disksize); |
4000 | if (ei->i_disksize > 0x7fffffffULL) { | |
4001 | struct super_block *sb = inode->i_sb; | |
4002 | if (!EXT4_HAS_RO_COMPAT_FEATURE(sb, | |
4003 | EXT4_FEATURE_RO_COMPAT_LARGE_FILE) || | |
4004 | EXT4_SB(sb)->s_es->s_rev_level == | |
4005 | cpu_to_le32(EXT4_GOOD_OLD_REV)) { | |
4006 | /* If this is the first large file | |
4007 | * created, add a flag to the superblock. | |
4008 | */ | |
4009 | err = ext4_journal_get_write_access(handle, | |
4010 | EXT4_SB(sb)->s_sbh); | |
4011 | if (err) | |
4012 | goto out_brelse; | |
4013 | ext4_update_dynamic_rev(sb); | |
4014 | EXT4_SET_RO_COMPAT_FEATURE(sb, | |
617ba13b | 4015 | EXT4_FEATURE_RO_COMPAT_LARGE_FILE); |
a48380f7 AK |
4016 | sb->s_dirt = 1; |
4017 | handle->h_sync = 1; | |
4018 | err = ext4_journal_dirty_metadata(handle, | |
4019 | EXT4_SB(sb)->s_sbh); | |
ac27a0ec DK |
4020 | } |
4021 | } | |
4022 | raw_inode->i_generation = cpu_to_le32(inode->i_generation); | |
4023 | if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode)) { | |
4024 | if (old_valid_dev(inode->i_rdev)) { | |
4025 | raw_inode->i_block[0] = | |
4026 | cpu_to_le32(old_encode_dev(inode->i_rdev)); | |
4027 | raw_inode->i_block[1] = 0; | |
4028 | } else { | |
4029 | raw_inode->i_block[0] = 0; | |
4030 | raw_inode->i_block[1] = | |
4031 | cpu_to_le32(new_encode_dev(inode->i_rdev)); | |
4032 | raw_inode->i_block[2] = 0; | |
4033 | } | |
617ba13b | 4034 | } else for (block = 0; block < EXT4_N_BLOCKS; block++) |
ac27a0ec DK |
4035 | raw_inode->i_block[block] = ei->i_data[block]; |
4036 | ||
25ec56b5 JNC |
4037 | raw_inode->i_disk_version = cpu_to_le32(inode->i_version); |
4038 | if (ei->i_extra_isize) { | |
4039 | if (EXT4_FITS_IN_INODE(raw_inode, ei, i_version_hi)) | |
4040 | raw_inode->i_version_hi = | |
4041 | cpu_to_le32(inode->i_version >> 32); | |
ac27a0ec | 4042 | raw_inode->i_extra_isize = cpu_to_le16(ei->i_extra_isize); |
25ec56b5 JNC |
4043 | } |
4044 | ||
ac27a0ec | 4045 | |
617ba13b MC |
4046 | BUFFER_TRACE(bh, "call ext4_journal_dirty_metadata"); |
4047 | rc = ext4_journal_dirty_metadata(handle, bh); | |
ac27a0ec DK |
4048 | if (!err) |
4049 | err = rc; | |
617ba13b | 4050 | ei->i_state &= ~EXT4_STATE_NEW; |
ac27a0ec DK |
4051 | |
4052 | out_brelse: | |
4053 | brelse (bh); | |
617ba13b | 4054 | ext4_std_error(inode->i_sb, err); |
ac27a0ec DK |
4055 | return err; |
4056 | } | |
4057 | ||
4058 | /* | |
617ba13b | 4059 | * ext4_write_inode() |
ac27a0ec DK |
4060 | * |
4061 | * We are called from a few places: | |
4062 | * | |
4063 | * - Within generic_file_write() for O_SYNC files. | |
4064 | * Here, there will be no transaction running. We wait for any running | |
4065 | * trasnaction to commit. | |
4066 | * | |
4067 | * - Within sys_sync(), kupdate and such. | |
4068 | * We wait on commit, if tol to. | |
4069 | * | |
4070 | * - Within prune_icache() (PF_MEMALLOC == true) | |
4071 | * Here we simply return. We can't afford to block kswapd on the | |
4072 | * journal commit. | |
4073 | * | |
4074 | * In all cases it is actually safe for us to return without doing anything, | |
4075 | * because the inode has been copied into a raw inode buffer in | |
617ba13b | 4076 | * ext4_mark_inode_dirty(). This is a correctness thing for O_SYNC and for |
ac27a0ec DK |
4077 | * knfsd. |
4078 | * | |
4079 | * Note that we are absolutely dependent upon all inode dirtiers doing the | |
4080 | * right thing: they *must* call mark_inode_dirty() after dirtying info in | |
4081 | * which we are interested. | |
4082 | * | |
4083 | * It would be a bug for them to not do this. The code: | |
4084 | * | |
4085 | * mark_inode_dirty(inode) | |
4086 | * stuff(); | |
4087 | * inode->i_size = expr; | |
4088 | * | |
4089 | * is in error because a kswapd-driven write_inode() could occur while | |
4090 | * `stuff()' is running, and the new i_size will be lost. Plus the inode | |
4091 | * will no longer be on the superblock's dirty inode list. | |
4092 | */ | |
617ba13b | 4093 | int ext4_write_inode(struct inode *inode, int wait) |
ac27a0ec DK |
4094 | { |
4095 | if (current->flags & PF_MEMALLOC) | |
4096 | return 0; | |
4097 | ||
617ba13b | 4098 | if (ext4_journal_current_handle()) { |
b38bd33a | 4099 | jbd_debug(1, "called recursively, non-PF_MEMALLOC!\n"); |
ac27a0ec DK |
4100 | dump_stack(); |
4101 | return -EIO; | |
4102 | } | |
4103 | ||
4104 | if (!wait) | |
4105 | return 0; | |
4106 | ||
617ba13b | 4107 | return ext4_force_commit(inode->i_sb); |
ac27a0ec DK |
4108 | } |
4109 | ||
4110 | /* | |
617ba13b | 4111 | * ext4_setattr() |
ac27a0ec DK |
4112 | * |
4113 | * Called from notify_change. | |
4114 | * | |
4115 | * We want to trap VFS attempts to truncate the file as soon as | |
4116 | * possible. In particular, we want to make sure that when the VFS | |
4117 | * shrinks i_size, we put the inode on the orphan list and modify | |
4118 | * i_disksize immediately, so that during the subsequent flushing of | |
4119 | * dirty pages and freeing of disk blocks, we can guarantee that any | |
4120 | * commit will leave the blocks being flushed in an unused state on | |
4121 | * disk. (On recovery, the inode will get truncated and the blocks will | |
4122 | * be freed, so we have a strong guarantee that no future commit will | |
4123 | * leave these blocks visible to the user.) | |
4124 | * | |
678aaf48 JK |
4125 | * Another thing we have to assure is that if we are in ordered mode |
4126 | * and inode is still attached to the committing transaction, we must | |
4127 | * we start writeout of all the dirty pages which are being truncated. | |
4128 | * This way we are sure that all the data written in the previous | |
4129 | * transaction are already on disk (truncate waits for pages under | |
4130 | * writeback). | |
4131 | * | |
4132 | * Called with inode->i_mutex down. | |
ac27a0ec | 4133 | */ |
617ba13b | 4134 | int ext4_setattr(struct dentry *dentry, struct iattr *attr) |
ac27a0ec DK |
4135 | { |
4136 | struct inode *inode = dentry->d_inode; | |
4137 | int error, rc = 0; | |
4138 | const unsigned int ia_valid = attr->ia_valid; | |
4139 | ||
4140 | error = inode_change_ok(inode, attr); | |
4141 | if (error) | |
4142 | return error; | |
4143 | ||
4144 | if ((ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid) || | |
4145 | (ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid)) { | |
4146 | handle_t *handle; | |
4147 | ||
4148 | /* (user+group)*(old+new) structure, inode write (sb, | |
4149 | * inode block, ? - but truncate inode update has it) */ | |
617ba13b MC |
4150 | handle = ext4_journal_start(inode, 2*(EXT4_QUOTA_INIT_BLOCKS(inode->i_sb)+ |
4151 | EXT4_QUOTA_DEL_BLOCKS(inode->i_sb))+3); | |
ac27a0ec DK |
4152 | if (IS_ERR(handle)) { |
4153 | error = PTR_ERR(handle); | |
4154 | goto err_out; | |
4155 | } | |
4156 | error = DQUOT_TRANSFER(inode, attr) ? -EDQUOT : 0; | |
4157 | if (error) { | |
617ba13b | 4158 | ext4_journal_stop(handle); |
ac27a0ec DK |
4159 | return error; |
4160 | } | |
4161 | /* Update corresponding info in inode so that everything is in | |
4162 | * one transaction */ | |
4163 | if (attr->ia_valid & ATTR_UID) | |
4164 | inode->i_uid = attr->ia_uid; | |
4165 | if (attr->ia_valid & ATTR_GID) | |
4166 | inode->i_gid = attr->ia_gid; | |
617ba13b MC |
4167 | error = ext4_mark_inode_dirty(handle, inode); |
4168 | ext4_journal_stop(handle); | |
ac27a0ec DK |
4169 | } |
4170 | ||
e2b46574 ES |
4171 | if (attr->ia_valid & ATTR_SIZE) { |
4172 | if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)) { | |
4173 | struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | |
4174 | ||
4175 | if (attr->ia_size > sbi->s_bitmap_maxbytes) { | |
4176 | error = -EFBIG; | |
4177 | goto err_out; | |
4178 | } | |
4179 | } | |
4180 | } | |
4181 | ||
ac27a0ec DK |
4182 | if (S_ISREG(inode->i_mode) && |
4183 | attr->ia_valid & ATTR_SIZE && attr->ia_size < inode->i_size) { | |
4184 | handle_t *handle; | |
4185 | ||
617ba13b | 4186 | handle = ext4_journal_start(inode, 3); |
ac27a0ec DK |
4187 | if (IS_ERR(handle)) { |
4188 | error = PTR_ERR(handle); | |
4189 | goto err_out; | |
4190 | } | |
4191 | ||
617ba13b MC |
4192 | error = ext4_orphan_add(handle, inode); |
4193 | EXT4_I(inode)->i_disksize = attr->ia_size; | |
4194 | rc = ext4_mark_inode_dirty(handle, inode); | |
ac27a0ec DK |
4195 | if (!error) |
4196 | error = rc; | |
617ba13b | 4197 | ext4_journal_stop(handle); |
678aaf48 JK |
4198 | |
4199 | if (ext4_should_order_data(inode)) { | |
4200 | error = ext4_begin_ordered_truncate(inode, | |
4201 | attr->ia_size); | |
4202 | if (error) { | |
4203 | /* Do as much error cleanup as possible */ | |
4204 | handle = ext4_journal_start(inode, 3); | |
4205 | if (IS_ERR(handle)) { | |
4206 | ext4_orphan_del(NULL, inode); | |
4207 | goto err_out; | |
4208 | } | |
4209 | ext4_orphan_del(handle, inode); | |
4210 | ext4_journal_stop(handle); | |
4211 | goto err_out; | |
4212 | } | |
4213 | } | |
ac27a0ec DK |
4214 | } |
4215 | ||
4216 | rc = inode_setattr(inode, attr); | |
4217 | ||
617ba13b | 4218 | /* If inode_setattr's call to ext4_truncate failed to get a |
ac27a0ec DK |
4219 | * transaction handle at all, we need to clean up the in-core |
4220 | * orphan list manually. */ | |
4221 | if (inode->i_nlink) | |
617ba13b | 4222 | ext4_orphan_del(NULL, inode); |
ac27a0ec DK |
4223 | |
4224 | if (!rc && (ia_valid & ATTR_MODE)) | |
617ba13b | 4225 | rc = ext4_acl_chmod(inode); |
ac27a0ec DK |
4226 | |
4227 | err_out: | |
617ba13b | 4228 | ext4_std_error(inode->i_sb, error); |
ac27a0ec DK |
4229 | if (!error) |
4230 | error = rc; | |
4231 | return error; | |
4232 | } | |
4233 | ||
3e3398a0 MC |
4234 | int ext4_getattr(struct vfsmount *mnt, struct dentry *dentry, |
4235 | struct kstat *stat) | |
4236 | { | |
4237 | struct inode *inode; | |
4238 | unsigned long delalloc_blocks; | |
4239 | ||
4240 | inode = dentry->d_inode; | |
4241 | generic_fillattr(inode, stat); | |
4242 | ||
4243 | /* | |
4244 | * We can't update i_blocks if the block allocation is delayed | |
4245 | * otherwise in the case of system crash before the real block | |
4246 | * allocation is done, we will have i_blocks inconsistent with | |
4247 | * on-disk file blocks. | |
4248 | * We always keep i_blocks updated together with real | |
4249 | * allocation. But to not confuse with user, stat | |
4250 | * will return the blocks that include the delayed allocation | |
4251 | * blocks for this file. | |
4252 | */ | |
4253 | spin_lock(&EXT4_I(inode)->i_block_reservation_lock); | |
4254 | delalloc_blocks = EXT4_I(inode)->i_reserved_data_blocks; | |
4255 | spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | |
4256 | ||
4257 | stat->blocks += (delalloc_blocks << inode->i_sb->s_blocksize_bits)>>9; | |
4258 | return 0; | |
4259 | } | |
ac27a0ec DK |
4260 | |
4261 | /* | |
4262 | * How many blocks doth make a writepage()? | |
4263 | * | |
4264 | * With N blocks per page, it may be: | |
4265 | * N data blocks | |
4266 | * 2 indirect block | |
4267 | * 2 dindirect | |
4268 | * 1 tindirect | |
4269 | * N+5 bitmap blocks (from the above) | |
4270 | * N+5 group descriptor summary blocks | |
4271 | * 1 inode block | |
4272 | * 1 superblock. | |
617ba13b | 4273 | * 2 * EXT4_SINGLEDATA_TRANS_BLOCKS for the quote files |
ac27a0ec | 4274 | * |
617ba13b | 4275 | * 3 * (N + 5) + 2 + 2 * EXT4_SINGLEDATA_TRANS_BLOCKS |
ac27a0ec DK |
4276 | * |
4277 | * With ordered or writeback data it's the same, less the N data blocks. | |
4278 | * | |
4279 | * If the inode's direct blocks can hold an integral number of pages then a | |
4280 | * page cannot straddle two indirect blocks, and we can only touch one indirect | |
4281 | * and dindirect block, and the "5" above becomes "3". | |
4282 | * | |
4283 | * This still overestimates under most circumstances. If we were to pass the | |
4284 | * start and end offsets in here as well we could do block_to_path() on each | |
4285 | * block and work out the exact number of indirects which are touched. Pah. | |
4286 | */ | |
4287 | ||
a86c6181 | 4288 | int ext4_writepage_trans_blocks(struct inode *inode) |
ac27a0ec | 4289 | { |
617ba13b MC |
4290 | int bpp = ext4_journal_blocks_per_page(inode); |
4291 | int indirects = (EXT4_NDIR_BLOCKS % bpp) ? 5 : 3; | |
ac27a0ec DK |
4292 | int ret; |
4293 | ||
a86c6181 AT |
4294 | if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) |
4295 | return ext4_ext_writepage_trans_blocks(inode, bpp); | |
4296 | ||
617ba13b | 4297 | if (ext4_should_journal_data(inode)) |
ac27a0ec DK |
4298 | ret = 3 * (bpp + indirects) + 2; |
4299 | else | |
4300 | ret = 2 * (bpp + indirects) + 2; | |
4301 | ||
4302 | #ifdef CONFIG_QUOTA | |
4303 | /* We know that structure was already allocated during DQUOT_INIT so | |
4304 | * we will be updating only the data blocks + inodes */ | |
617ba13b | 4305 | ret += 2*EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb); |
ac27a0ec DK |
4306 | #endif |
4307 | ||
4308 | return ret; | |
4309 | } | |
4310 | ||
4311 | /* | |
617ba13b | 4312 | * The caller must have previously called ext4_reserve_inode_write(). |
ac27a0ec DK |
4313 | * Give this, we know that the caller already has write access to iloc->bh. |
4314 | */ | |
617ba13b MC |
4315 | int ext4_mark_iloc_dirty(handle_t *handle, |
4316 | struct inode *inode, struct ext4_iloc *iloc) | |
ac27a0ec DK |
4317 | { |
4318 | int err = 0; | |
4319 | ||
25ec56b5 JNC |
4320 | if (test_opt(inode->i_sb, I_VERSION)) |
4321 | inode_inc_iversion(inode); | |
4322 | ||
ac27a0ec DK |
4323 | /* the do_update_inode consumes one bh->b_count */ |
4324 | get_bh(iloc->bh); | |
4325 | ||
dab291af | 4326 | /* ext4_do_update_inode() does jbd2_journal_dirty_metadata */ |
617ba13b | 4327 | err = ext4_do_update_inode(handle, inode, iloc); |
ac27a0ec DK |
4328 | put_bh(iloc->bh); |
4329 | return err; | |
4330 | } | |
4331 | ||
4332 | /* | |
4333 | * On success, We end up with an outstanding reference count against | |
4334 | * iloc->bh. This _must_ be cleaned up later. | |
4335 | */ | |
4336 | ||
4337 | int | |
617ba13b MC |
4338 | ext4_reserve_inode_write(handle_t *handle, struct inode *inode, |
4339 | struct ext4_iloc *iloc) | |
ac27a0ec DK |
4340 | { |
4341 | int err = 0; | |
4342 | if (handle) { | |
617ba13b | 4343 | err = ext4_get_inode_loc(inode, iloc); |
ac27a0ec DK |
4344 | if (!err) { |
4345 | BUFFER_TRACE(iloc->bh, "get_write_access"); | |
617ba13b | 4346 | err = ext4_journal_get_write_access(handle, iloc->bh); |
ac27a0ec DK |
4347 | if (err) { |
4348 | brelse(iloc->bh); | |
4349 | iloc->bh = NULL; | |
4350 | } | |
4351 | } | |
4352 | } | |
617ba13b | 4353 | ext4_std_error(inode->i_sb, err); |
ac27a0ec DK |
4354 | return err; |
4355 | } | |
4356 | ||
6dd4ee7c KS |
4357 | /* |
4358 | * Expand an inode by new_extra_isize bytes. | |
4359 | * Returns 0 on success or negative error number on failure. | |
4360 | */ | |
1d03ec98 AK |
4361 | static int ext4_expand_extra_isize(struct inode *inode, |
4362 | unsigned int new_extra_isize, | |
4363 | struct ext4_iloc iloc, | |
4364 | handle_t *handle) | |
6dd4ee7c KS |
4365 | { |
4366 | struct ext4_inode *raw_inode; | |
4367 | struct ext4_xattr_ibody_header *header; | |
4368 | struct ext4_xattr_entry *entry; | |
4369 | ||
4370 | if (EXT4_I(inode)->i_extra_isize >= new_extra_isize) | |
4371 | return 0; | |
4372 | ||
4373 | raw_inode = ext4_raw_inode(&iloc); | |
4374 | ||
4375 | header = IHDR(inode, raw_inode); | |
4376 | entry = IFIRST(header); | |
4377 | ||
4378 | /* No extended attributes present */ | |
4379 | if (!(EXT4_I(inode)->i_state & EXT4_STATE_XATTR) || | |
4380 | header->h_magic != cpu_to_le32(EXT4_XATTR_MAGIC)) { | |
4381 | memset((void *)raw_inode + EXT4_GOOD_OLD_INODE_SIZE, 0, | |
4382 | new_extra_isize); | |
4383 | EXT4_I(inode)->i_extra_isize = new_extra_isize; | |
4384 | return 0; | |
4385 | } | |
4386 | ||
4387 | /* try to expand with EAs present */ | |
4388 | return ext4_expand_extra_isize_ea(inode, new_extra_isize, | |
4389 | raw_inode, handle); | |
4390 | } | |
4391 | ||
ac27a0ec DK |
4392 | /* |
4393 | * What we do here is to mark the in-core inode as clean with respect to inode | |
4394 | * dirtiness (it may still be data-dirty). | |
4395 | * This means that the in-core inode may be reaped by prune_icache | |
4396 | * without having to perform any I/O. This is a very good thing, | |
4397 | * because *any* task may call prune_icache - even ones which | |
4398 | * have a transaction open against a different journal. | |
4399 | * | |
4400 | * Is this cheating? Not really. Sure, we haven't written the | |
4401 | * inode out, but prune_icache isn't a user-visible syncing function. | |
4402 | * Whenever the user wants stuff synced (sys_sync, sys_msync, sys_fsync) | |
4403 | * we start and wait on commits. | |
4404 | * | |
4405 | * Is this efficient/effective? Well, we're being nice to the system | |
4406 | * by cleaning up our inodes proactively so they can be reaped | |
4407 | * without I/O. But we are potentially leaving up to five seconds' | |
4408 | * worth of inodes floating about which prune_icache wants us to | |
4409 | * write out. One way to fix that would be to get prune_icache() | |
4410 | * to do a write_super() to free up some memory. It has the desired | |
4411 | * effect. | |
4412 | */ | |
617ba13b | 4413 | int ext4_mark_inode_dirty(handle_t *handle, struct inode *inode) |
ac27a0ec | 4414 | { |
617ba13b | 4415 | struct ext4_iloc iloc; |
6dd4ee7c KS |
4416 | struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); |
4417 | static unsigned int mnt_count; | |
4418 | int err, ret; | |
ac27a0ec DK |
4419 | |
4420 | might_sleep(); | |
617ba13b | 4421 | err = ext4_reserve_inode_write(handle, inode, &iloc); |
6dd4ee7c KS |
4422 | if (EXT4_I(inode)->i_extra_isize < sbi->s_want_extra_isize && |
4423 | !(EXT4_I(inode)->i_state & EXT4_STATE_NO_EXPAND)) { | |
4424 | /* | |
4425 | * We need extra buffer credits since we may write into EA block | |
4426 | * with this same handle. If journal_extend fails, then it will | |
4427 | * only result in a minor loss of functionality for that inode. | |
4428 | * If this is felt to be critical, then e2fsck should be run to | |
4429 | * force a large enough s_min_extra_isize. | |
4430 | */ | |
4431 | if ((jbd2_journal_extend(handle, | |
4432 | EXT4_DATA_TRANS_BLOCKS(inode->i_sb))) == 0) { | |
4433 | ret = ext4_expand_extra_isize(inode, | |
4434 | sbi->s_want_extra_isize, | |
4435 | iloc, handle); | |
4436 | if (ret) { | |
4437 | EXT4_I(inode)->i_state |= EXT4_STATE_NO_EXPAND; | |
c1bddad9 AK |
4438 | if (mnt_count != |
4439 | le16_to_cpu(sbi->s_es->s_mnt_count)) { | |
46e665e9 | 4440 | ext4_warning(inode->i_sb, __func__, |
6dd4ee7c KS |
4441 | "Unable to expand inode %lu. Delete" |
4442 | " some EAs or run e2fsck.", | |
4443 | inode->i_ino); | |
c1bddad9 AK |
4444 | mnt_count = |
4445 | le16_to_cpu(sbi->s_es->s_mnt_count); | |
6dd4ee7c KS |
4446 | } |
4447 | } | |
4448 | } | |
4449 | } | |
ac27a0ec | 4450 | if (!err) |
617ba13b | 4451 | err = ext4_mark_iloc_dirty(handle, inode, &iloc); |
ac27a0ec DK |
4452 | return err; |
4453 | } | |
4454 | ||
4455 | /* | |
617ba13b | 4456 | * ext4_dirty_inode() is called from __mark_inode_dirty() |
ac27a0ec DK |
4457 | * |
4458 | * We're really interested in the case where a file is being extended. | |
4459 | * i_size has been changed by generic_commit_write() and we thus need | |
4460 | * to include the updated inode in the current transaction. | |
4461 | * | |
4462 | * Also, DQUOT_ALLOC_SPACE() will always dirty the inode when blocks | |
4463 | * are allocated to the file. | |
4464 | * | |
4465 | * If the inode is marked synchronous, we don't honour that here - doing | |
4466 | * so would cause a commit on atime updates, which we don't bother doing. | |
4467 | * We handle synchronous inodes at the highest possible level. | |
4468 | */ | |
617ba13b | 4469 | void ext4_dirty_inode(struct inode *inode) |
ac27a0ec | 4470 | { |
617ba13b | 4471 | handle_t *current_handle = ext4_journal_current_handle(); |
ac27a0ec DK |
4472 | handle_t *handle; |
4473 | ||
617ba13b | 4474 | handle = ext4_journal_start(inode, 2); |
ac27a0ec DK |
4475 | if (IS_ERR(handle)) |
4476 | goto out; | |
4477 | if (current_handle && | |
4478 | current_handle->h_transaction != handle->h_transaction) { | |
4479 | /* This task has a transaction open against a different fs */ | |
4480 | printk(KERN_EMERG "%s: transactions do not match!\n", | |
46e665e9 | 4481 | __func__); |
ac27a0ec DK |
4482 | } else { |
4483 | jbd_debug(5, "marking dirty. outer handle=%p\n", | |
4484 | current_handle); | |
617ba13b | 4485 | ext4_mark_inode_dirty(handle, inode); |
ac27a0ec | 4486 | } |
617ba13b | 4487 | ext4_journal_stop(handle); |
ac27a0ec DK |
4488 | out: |
4489 | return; | |
4490 | } | |
4491 | ||
4492 | #if 0 | |
4493 | /* | |
4494 | * Bind an inode's backing buffer_head into this transaction, to prevent | |
4495 | * it from being flushed to disk early. Unlike | |
617ba13b | 4496 | * ext4_reserve_inode_write, this leaves behind no bh reference and |
ac27a0ec DK |
4497 | * returns no iloc structure, so the caller needs to repeat the iloc |
4498 | * lookup to mark the inode dirty later. | |
4499 | */ | |
617ba13b | 4500 | static int ext4_pin_inode(handle_t *handle, struct inode *inode) |
ac27a0ec | 4501 | { |
617ba13b | 4502 | struct ext4_iloc iloc; |
ac27a0ec DK |
4503 | |
4504 | int err = 0; | |
4505 | if (handle) { | |
617ba13b | 4506 | err = ext4_get_inode_loc(inode, &iloc); |
ac27a0ec DK |
4507 | if (!err) { |
4508 | BUFFER_TRACE(iloc.bh, "get_write_access"); | |
dab291af | 4509 | err = jbd2_journal_get_write_access(handle, iloc.bh); |
ac27a0ec | 4510 | if (!err) |
617ba13b | 4511 | err = ext4_journal_dirty_metadata(handle, |
ac27a0ec DK |
4512 | iloc.bh); |
4513 | brelse(iloc.bh); | |
4514 | } | |
4515 | } | |
617ba13b | 4516 | ext4_std_error(inode->i_sb, err); |
ac27a0ec DK |
4517 | return err; |
4518 | } | |
4519 | #endif | |
4520 | ||
617ba13b | 4521 | int ext4_change_inode_journal_flag(struct inode *inode, int val) |
ac27a0ec DK |
4522 | { |
4523 | journal_t *journal; | |
4524 | handle_t *handle; | |
4525 | int err; | |
4526 | ||
4527 | /* | |
4528 | * We have to be very careful here: changing a data block's | |
4529 | * journaling status dynamically is dangerous. If we write a | |
4530 | * data block to the journal, change the status and then delete | |
4531 | * that block, we risk forgetting to revoke the old log record | |
4532 | * from the journal and so a subsequent replay can corrupt data. | |
4533 | * So, first we make sure that the journal is empty and that | |
4534 | * nobody is changing anything. | |
4535 | */ | |
4536 | ||
617ba13b | 4537 | journal = EXT4_JOURNAL(inode); |
d699594d | 4538 | if (is_journal_aborted(journal)) |
ac27a0ec DK |
4539 | return -EROFS; |
4540 | ||
dab291af MC |
4541 | jbd2_journal_lock_updates(journal); |
4542 | jbd2_journal_flush(journal); | |
ac27a0ec DK |
4543 | |
4544 | /* | |
4545 | * OK, there are no updates running now, and all cached data is | |
4546 | * synced to disk. We are now in a completely consistent state | |
4547 | * which doesn't have anything in the journal, and we know that | |
4548 | * no filesystem updates are running, so it is safe to modify | |
4549 | * the inode's in-core data-journaling state flag now. | |
4550 | */ | |
4551 | ||
4552 | if (val) | |
617ba13b | 4553 | EXT4_I(inode)->i_flags |= EXT4_JOURNAL_DATA_FL; |
ac27a0ec | 4554 | else |
617ba13b MC |
4555 | EXT4_I(inode)->i_flags &= ~EXT4_JOURNAL_DATA_FL; |
4556 | ext4_set_aops(inode); | |
ac27a0ec | 4557 | |
dab291af | 4558 | jbd2_journal_unlock_updates(journal); |
ac27a0ec DK |
4559 | |
4560 | /* Finally we can mark the inode as dirty. */ | |
4561 | ||
617ba13b | 4562 | handle = ext4_journal_start(inode, 1); |
ac27a0ec DK |
4563 | if (IS_ERR(handle)) |
4564 | return PTR_ERR(handle); | |
4565 | ||
617ba13b | 4566 | err = ext4_mark_inode_dirty(handle, inode); |
ac27a0ec | 4567 | handle->h_sync = 1; |
617ba13b MC |
4568 | ext4_journal_stop(handle); |
4569 | ext4_std_error(inode->i_sb, err); | |
ac27a0ec DK |
4570 | |
4571 | return err; | |
4572 | } | |
2e9ee850 AK |
4573 | |
4574 | static int ext4_bh_unmapped(handle_t *handle, struct buffer_head *bh) | |
4575 | { | |
4576 | return !buffer_mapped(bh); | |
4577 | } | |
4578 | ||
4579 | int ext4_page_mkwrite(struct vm_area_struct *vma, struct page *page) | |
4580 | { | |
4581 | loff_t size; | |
4582 | unsigned long len; | |
4583 | int ret = -EINVAL; | |
4584 | struct file *file = vma->vm_file; | |
4585 | struct inode *inode = file->f_path.dentry->d_inode; | |
4586 | struct address_space *mapping = inode->i_mapping; | |
4587 | ||
4588 | /* | |
4589 | * Get i_alloc_sem to stop truncates messing with the inode. We cannot | |
4590 | * get i_mutex because we are already holding mmap_sem. | |
4591 | */ | |
4592 | down_read(&inode->i_alloc_sem); | |
4593 | size = i_size_read(inode); | |
4594 | if (page->mapping != mapping || size <= page_offset(page) | |
4595 | || !PageUptodate(page)) { | |
4596 | /* page got truncated from under us? */ | |
4597 | goto out_unlock; | |
4598 | } | |
4599 | ret = 0; | |
4600 | if (PageMappedToDisk(page)) | |
4601 | goto out_unlock; | |
4602 | ||
4603 | if (page->index == size >> PAGE_CACHE_SHIFT) | |
4604 | len = size & ~PAGE_CACHE_MASK; | |
4605 | else | |
4606 | len = PAGE_CACHE_SIZE; | |
4607 | ||
4608 | if (page_has_buffers(page)) { | |
4609 | /* return if we have all the buffers mapped */ | |
4610 | if (!walk_page_buffers(NULL, page_buffers(page), 0, len, NULL, | |
4611 | ext4_bh_unmapped)) | |
4612 | goto out_unlock; | |
4613 | } | |
4614 | /* | |
4615 | * OK, we need to fill the hole... Do write_begin write_end | |
4616 | * to do block allocation/reservation.We are not holding | |
4617 | * inode.i__mutex here. That allow * parallel write_begin, | |
4618 | * write_end call. lock_page prevent this from happening | |
4619 | * on the same page though | |
4620 | */ | |
4621 | ret = mapping->a_ops->write_begin(file, mapping, page_offset(page), | |
4622 | len, AOP_FLAG_UNINTERRUPTIBLE, &page, NULL); | |
4623 | if (ret < 0) | |
4624 | goto out_unlock; | |
4625 | ret = mapping->a_ops->write_end(file, mapping, page_offset(page), | |
4626 | len, len, page, NULL); | |
4627 | if (ret < 0) | |
4628 | goto out_unlock; | |
4629 | ret = 0; | |
4630 | out_unlock: | |
4631 | up_read(&inode->i_alloc_sem); | |
4632 | return ret; | |
4633 | } |