]>
Commit | Line | Data |
---|---|---|
27e34995 | 1 | /* |
1a6e4b74 VK |
2 | * ST Microelectronics MFD: stmpe's driver |
3 | * | |
27e34995 RV |
4 | * Copyright (C) ST-Ericsson SA 2010 |
5 | * | |
6 | * License Terms: GNU General Public License, version 2 | |
7 | * Author: Rabin Vincent <[email protected]> for ST-Ericsson | |
8 | */ | |
9 | ||
ac713cc9 | 10 | #include <linux/err.h> |
73de16db | 11 | #include <linux/gpio.h> |
dba61c8f | 12 | #include <linux/export.h> |
27e34995 | 13 | #include <linux/kernel.h> |
27e34995 RV |
14 | #include <linux/interrupt.h> |
15 | #include <linux/irq.h> | |
76f93992 | 16 | #include <linux/irqdomain.h> |
20d5c7de | 17 | #include <linux/of.h> |
ac713cc9 | 18 | #include <linux/of_gpio.h> |
1a6e4b74 | 19 | #include <linux/pm.h> |
27e34995 | 20 | #include <linux/slab.h> |
27e34995 | 21 | #include <linux/mfd/core.h> |
230f13a5 | 22 | #include <linux/delay.h> |
9c9e3214 | 23 | #include <linux/regulator/consumer.h> |
27e34995 RV |
24 | #include "stmpe.h" |
25 | ||
fc1882dc LW |
26 | /** |
27 | * struct stmpe_platform_data - STMPE platform data | |
28 | * @id: device id to distinguish between multiple STMPEs on the same board | |
29 | * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*) | |
30 | * @irq_trigger: IRQ trigger to use for the interrupt to the host | |
31 | * @autosleep: bool to enable/disable stmpe autosleep | |
32 | * @autosleep_timeout: inactivity timeout in milliseconds for autosleep | |
33 | * @irq_over_gpio: true if gpio is used to get irq | |
34 | * @irq_gpio: gpio number over which irq will be requested (significant only if | |
35 | * irq_over_gpio is true) | |
36 | */ | |
37 | struct stmpe_platform_data { | |
38 | int id; | |
39 | unsigned int blocks; | |
40 | unsigned int irq_trigger; | |
41 | bool autosleep; | |
42 | bool irq_over_gpio; | |
43 | int irq_gpio; | |
44 | int autosleep_timeout; | |
45 | }; | |
46 | ||
27e34995 RV |
47 | static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks) |
48 | { | |
49 | return stmpe->variant->enable(stmpe, blocks, true); | |
50 | } | |
51 | ||
52 | static int __stmpe_disable(struct stmpe *stmpe, unsigned int blocks) | |
53 | { | |
54 | return stmpe->variant->enable(stmpe, blocks, false); | |
55 | } | |
56 | ||
57 | static int __stmpe_reg_read(struct stmpe *stmpe, u8 reg) | |
58 | { | |
59 | int ret; | |
60 | ||
1a6e4b74 | 61 | ret = stmpe->ci->read_byte(stmpe, reg); |
27e34995 | 62 | if (ret < 0) |
1a6e4b74 | 63 | dev_err(stmpe->dev, "failed to read reg %#x: %d\n", reg, ret); |
27e34995 RV |
64 | |
65 | dev_vdbg(stmpe->dev, "rd: reg %#x => data %#x\n", reg, ret); | |
66 | ||
67 | return ret; | |
68 | } | |
69 | ||
70 | static int __stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val) | |
71 | { | |
72 | int ret; | |
73 | ||
74 | dev_vdbg(stmpe->dev, "wr: reg %#x <= %#x\n", reg, val); | |
75 | ||
1a6e4b74 | 76 | ret = stmpe->ci->write_byte(stmpe, reg, val); |
27e34995 | 77 | if (ret < 0) |
1a6e4b74 | 78 | dev_err(stmpe->dev, "failed to write reg %#x: %d\n", reg, ret); |
27e34995 RV |
79 | |
80 | return ret; | |
81 | } | |
82 | ||
83 | static int __stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val) | |
84 | { | |
85 | int ret; | |
86 | ||
87 | ret = __stmpe_reg_read(stmpe, reg); | |
88 | if (ret < 0) | |
89 | return ret; | |
90 | ||
91 | ret &= ~mask; | |
92 | ret |= val; | |
93 | ||
94 | return __stmpe_reg_write(stmpe, reg, ret); | |
95 | } | |
96 | ||
97 | static int __stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, | |
98 | u8 *values) | |
99 | { | |
100 | int ret; | |
101 | ||
1a6e4b74 | 102 | ret = stmpe->ci->read_block(stmpe, reg, length, values); |
27e34995 | 103 | if (ret < 0) |
1a6e4b74 | 104 | dev_err(stmpe->dev, "failed to read regs %#x: %d\n", reg, ret); |
27e34995 RV |
105 | |
106 | dev_vdbg(stmpe->dev, "rd: reg %#x (%d) => ret %#x\n", reg, length, ret); | |
107 | stmpe_dump_bytes("stmpe rd: ", values, length); | |
108 | ||
109 | return ret; | |
110 | } | |
111 | ||
112 | static int __stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length, | |
113 | const u8 *values) | |
114 | { | |
115 | int ret; | |
116 | ||
117 | dev_vdbg(stmpe->dev, "wr: regs %#x (%d)\n", reg, length); | |
118 | stmpe_dump_bytes("stmpe wr: ", values, length); | |
119 | ||
1a6e4b74 | 120 | ret = stmpe->ci->write_block(stmpe, reg, length, values); |
27e34995 | 121 | if (ret < 0) |
1a6e4b74 | 122 | dev_err(stmpe->dev, "failed to write regs %#x: %d\n", reg, ret); |
27e34995 RV |
123 | |
124 | return ret; | |
125 | } | |
126 | ||
127 | /** | |
128 | * stmpe_enable - enable blocks on an STMPE device | |
129 | * @stmpe: Device to work on | |
130 | * @blocks: Mask of blocks (enum stmpe_block values) to enable | |
131 | */ | |
132 | int stmpe_enable(struct stmpe *stmpe, unsigned int blocks) | |
133 | { | |
134 | int ret; | |
135 | ||
136 | mutex_lock(&stmpe->lock); | |
137 | ret = __stmpe_enable(stmpe, blocks); | |
138 | mutex_unlock(&stmpe->lock); | |
139 | ||
140 | return ret; | |
141 | } | |
142 | EXPORT_SYMBOL_GPL(stmpe_enable); | |
143 | ||
144 | /** | |
145 | * stmpe_disable - disable blocks on an STMPE device | |
146 | * @stmpe: Device to work on | |
147 | * @blocks: Mask of blocks (enum stmpe_block values) to enable | |
148 | */ | |
149 | int stmpe_disable(struct stmpe *stmpe, unsigned int blocks) | |
150 | { | |
151 | int ret; | |
152 | ||
153 | mutex_lock(&stmpe->lock); | |
154 | ret = __stmpe_disable(stmpe, blocks); | |
155 | mutex_unlock(&stmpe->lock); | |
156 | ||
157 | return ret; | |
158 | } | |
159 | EXPORT_SYMBOL_GPL(stmpe_disable); | |
160 | ||
161 | /** | |
162 | * stmpe_reg_read() - read a single STMPE register | |
163 | * @stmpe: Device to read from | |
164 | * @reg: Register to read | |
165 | */ | |
166 | int stmpe_reg_read(struct stmpe *stmpe, u8 reg) | |
167 | { | |
168 | int ret; | |
169 | ||
170 | mutex_lock(&stmpe->lock); | |
171 | ret = __stmpe_reg_read(stmpe, reg); | |
172 | mutex_unlock(&stmpe->lock); | |
173 | ||
174 | return ret; | |
175 | } | |
176 | EXPORT_SYMBOL_GPL(stmpe_reg_read); | |
177 | ||
178 | /** | |
179 | * stmpe_reg_write() - write a single STMPE register | |
180 | * @stmpe: Device to write to | |
181 | * @reg: Register to write | |
182 | * @val: Value to write | |
183 | */ | |
184 | int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val) | |
185 | { | |
186 | int ret; | |
187 | ||
188 | mutex_lock(&stmpe->lock); | |
189 | ret = __stmpe_reg_write(stmpe, reg, val); | |
190 | mutex_unlock(&stmpe->lock); | |
191 | ||
192 | return ret; | |
193 | } | |
194 | EXPORT_SYMBOL_GPL(stmpe_reg_write); | |
195 | ||
196 | /** | |
197 | * stmpe_set_bits() - set the value of a bitfield in a STMPE register | |
198 | * @stmpe: Device to write to | |
199 | * @reg: Register to write | |
200 | * @mask: Mask of bits to set | |
201 | * @val: Value to set | |
202 | */ | |
203 | int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val) | |
204 | { | |
205 | int ret; | |
206 | ||
207 | mutex_lock(&stmpe->lock); | |
208 | ret = __stmpe_set_bits(stmpe, reg, mask, val); | |
209 | mutex_unlock(&stmpe->lock); | |
210 | ||
211 | return ret; | |
212 | } | |
213 | EXPORT_SYMBOL_GPL(stmpe_set_bits); | |
214 | ||
215 | /** | |
216 | * stmpe_block_read() - read multiple STMPE registers | |
217 | * @stmpe: Device to read from | |
218 | * @reg: First register | |
219 | * @length: Number of registers | |
220 | * @values: Buffer to write to | |
221 | */ | |
222 | int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values) | |
223 | { | |
224 | int ret; | |
225 | ||
226 | mutex_lock(&stmpe->lock); | |
227 | ret = __stmpe_block_read(stmpe, reg, length, values); | |
228 | mutex_unlock(&stmpe->lock); | |
229 | ||
230 | return ret; | |
231 | } | |
232 | EXPORT_SYMBOL_GPL(stmpe_block_read); | |
233 | ||
234 | /** | |
235 | * stmpe_block_write() - write multiple STMPE registers | |
236 | * @stmpe: Device to write to | |
237 | * @reg: First register | |
238 | * @length: Number of registers | |
239 | * @values: Values to write | |
240 | */ | |
241 | int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length, | |
242 | const u8 *values) | |
243 | { | |
244 | int ret; | |
245 | ||
246 | mutex_lock(&stmpe->lock); | |
247 | ret = __stmpe_block_write(stmpe, reg, length, values); | |
248 | mutex_unlock(&stmpe->lock); | |
249 | ||
250 | return ret; | |
251 | } | |
252 | EXPORT_SYMBOL_GPL(stmpe_block_write); | |
253 | ||
254 | /** | |
4dcaa6b6 | 255 | * stmpe_set_altfunc()- set the alternate function for STMPE pins |
27e34995 RV |
256 | * @stmpe: Device to configure |
257 | * @pins: Bitmask of pins to affect | |
258 | * @block: block to enable alternate functions for | |
259 | * | |
260 | * @pins is assumed to have a bit set for each of the bits whose alternate | |
261 | * function is to be changed, numbered according to the GPIOXY numbers. | |
262 | * | |
263 | * If the GPIO module is not enabled, this function automatically enables it in | |
264 | * order to perform the change. | |
265 | */ | |
266 | int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, enum stmpe_block block) | |
267 | { | |
268 | struct stmpe_variant_info *variant = stmpe->variant; | |
269 | u8 regaddr = stmpe->regs[STMPE_IDX_GPAFR_U_MSB]; | |
270 | int af_bits = variant->af_bits; | |
271 | int numregs = DIV_ROUND_UP(stmpe->num_gpios * af_bits, 8); | |
27e34995 | 272 | int mask = (1 << af_bits) - 1; |
7929fa77 | 273 | u8 regs[8]; |
7f7f4ea1 VK |
274 | int af, afperreg, ret; |
275 | ||
276 | if (!variant->get_altfunc) | |
277 | return 0; | |
27e34995 | 278 | |
7f7f4ea1 | 279 | afperreg = 8 / af_bits; |
27e34995 RV |
280 | mutex_lock(&stmpe->lock); |
281 | ||
282 | ret = __stmpe_enable(stmpe, STMPE_BLOCK_GPIO); | |
283 | if (ret < 0) | |
284 | goto out; | |
285 | ||
286 | ret = __stmpe_block_read(stmpe, regaddr, numregs, regs); | |
287 | if (ret < 0) | |
288 | goto out; | |
289 | ||
290 | af = variant->get_altfunc(stmpe, block); | |
291 | ||
292 | while (pins) { | |
293 | int pin = __ffs(pins); | |
294 | int regoffset = numregs - (pin / afperreg) - 1; | |
295 | int pos = (pin % afperreg) * (8 / afperreg); | |
296 | ||
297 | regs[regoffset] &= ~(mask << pos); | |
298 | regs[regoffset] |= af << pos; | |
299 | ||
300 | pins &= ~(1 << pin); | |
301 | } | |
302 | ||
303 | ret = __stmpe_block_write(stmpe, regaddr, numregs, regs); | |
304 | ||
305 | out: | |
306 | mutex_unlock(&stmpe->lock); | |
307 | return ret; | |
308 | } | |
309 | EXPORT_SYMBOL_GPL(stmpe_set_altfunc); | |
310 | ||
311 | /* | |
312 | * GPIO (all variants) | |
313 | */ | |
314 | ||
315 | static struct resource stmpe_gpio_resources[] = { | |
316 | /* Start and end filled dynamically */ | |
317 | { | |
318 | .flags = IORESOURCE_IRQ, | |
319 | }, | |
320 | }; | |
321 | ||
6bbb3c4c | 322 | static const struct mfd_cell stmpe_gpio_cell = { |
27e34995 | 323 | .name = "stmpe-gpio", |
86605cfe | 324 | .of_compatible = "st,stmpe-gpio", |
27e34995 RV |
325 | .resources = stmpe_gpio_resources, |
326 | .num_resources = ARRAY_SIZE(stmpe_gpio_resources), | |
327 | }; | |
328 | ||
6bbb3c4c | 329 | static const struct mfd_cell stmpe_gpio_cell_noirq = { |
e31f9b82 | 330 | .name = "stmpe-gpio", |
86605cfe | 331 | .of_compatible = "st,stmpe-gpio", |
e31f9b82 CB |
332 | /* gpio cell resources consist of an irq only so no resources here */ |
333 | }; | |
334 | ||
27e34995 RV |
335 | /* |
336 | * Keypad (1601, 2401, 2403) | |
337 | */ | |
338 | ||
339 | static struct resource stmpe_keypad_resources[] = { | |
340 | { | |
341 | .name = "KEYPAD", | |
27e34995 RV |
342 | .flags = IORESOURCE_IRQ, |
343 | }, | |
344 | { | |
345 | .name = "KEYPAD_OVER", | |
27e34995 RV |
346 | .flags = IORESOURCE_IRQ, |
347 | }, | |
348 | }; | |
349 | ||
6bbb3c4c | 350 | static const struct mfd_cell stmpe_keypad_cell = { |
27e34995 | 351 | .name = "stmpe-keypad", |
6ea32387 | 352 | .of_compatible = "st,stmpe-keypad", |
27e34995 RV |
353 | .resources = stmpe_keypad_resources, |
354 | .num_resources = ARRAY_SIZE(stmpe_keypad_resources), | |
355 | }; | |
356 | ||
b273c5e0 LW |
357 | /* |
358 | * PWM (1601, 2401, 2403) | |
359 | */ | |
360 | static struct resource stmpe_pwm_resources[] = { | |
361 | { | |
362 | .name = "PWM0", | |
363 | .flags = IORESOURCE_IRQ, | |
364 | }, | |
365 | { | |
366 | .name = "PWM1", | |
367 | .flags = IORESOURCE_IRQ, | |
368 | }, | |
369 | { | |
370 | .name = "PWM2", | |
371 | .flags = IORESOURCE_IRQ, | |
372 | }, | |
373 | }; | |
374 | ||
375 | static const struct mfd_cell stmpe_pwm_cell = { | |
376 | .name = "stmpe-pwm", | |
377 | .of_compatible = "st,stmpe-pwm", | |
378 | .resources = stmpe_pwm_resources, | |
379 | .num_resources = ARRAY_SIZE(stmpe_pwm_resources), | |
380 | }; | |
381 | ||
7f7f4ea1 VK |
382 | /* |
383 | * STMPE801 | |
384 | */ | |
385 | static const u8 stmpe801_regs[] = { | |
386 | [STMPE_IDX_CHIP_ID] = STMPE801_REG_CHIP_ID, | |
387 | [STMPE_IDX_ICR_LSB] = STMPE801_REG_SYS_CTRL, | |
388 | [STMPE_IDX_GPMR_LSB] = STMPE801_REG_GPIO_MP_STA, | |
389 | [STMPE_IDX_GPSR_LSB] = STMPE801_REG_GPIO_SET_PIN, | |
390 | [STMPE_IDX_GPCR_LSB] = STMPE801_REG_GPIO_SET_PIN, | |
391 | [STMPE_IDX_GPDR_LSB] = STMPE801_REG_GPIO_DIR, | |
392 | [STMPE_IDX_IEGPIOR_LSB] = STMPE801_REG_GPIO_INT_EN, | |
393 | [STMPE_IDX_ISGPIOR_MSB] = STMPE801_REG_GPIO_INT_STA, | |
394 | ||
395 | }; | |
396 | ||
397 | static struct stmpe_variant_block stmpe801_blocks[] = { | |
398 | { | |
399 | .cell = &stmpe_gpio_cell, | |
400 | .irq = 0, | |
401 | .block = STMPE_BLOCK_GPIO, | |
402 | }, | |
403 | }; | |
404 | ||
e31f9b82 CB |
405 | static struct stmpe_variant_block stmpe801_blocks_noirq[] = { |
406 | { | |
407 | .cell = &stmpe_gpio_cell_noirq, | |
408 | .block = STMPE_BLOCK_GPIO, | |
409 | }, | |
410 | }; | |
411 | ||
7f7f4ea1 VK |
412 | static int stmpe801_enable(struct stmpe *stmpe, unsigned int blocks, |
413 | bool enable) | |
414 | { | |
415 | if (blocks & STMPE_BLOCK_GPIO) | |
416 | return 0; | |
417 | else | |
418 | return -EINVAL; | |
419 | } | |
420 | ||
421 | static struct stmpe_variant_info stmpe801 = { | |
422 | .name = "stmpe801", | |
423 | .id_val = STMPE801_ID, | |
424 | .id_mask = 0xffff, | |
425 | .num_gpios = 8, | |
426 | .regs = stmpe801_regs, | |
427 | .blocks = stmpe801_blocks, | |
428 | .num_blocks = ARRAY_SIZE(stmpe801_blocks), | |
429 | .num_irqs = STMPE801_NR_INTERNAL_IRQS, | |
430 | .enable = stmpe801_enable, | |
431 | }; | |
432 | ||
e31f9b82 CB |
433 | static struct stmpe_variant_info stmpe801_noirq = { |
434 | .name = "stmpe801", | |
435 | .id_val = STMPE801_ID, | |
436 | .id_mask = 0xffff, | |
437 | .num_gpios = 8, | |
438 | .regs = stmpe801_regs, | |
439 | .blocks = stmpe801_blocks_noirq, | |
440 | .num_blocks = ARRAY_SIZE(stmpe801_blocks_noirq), | |
441 | .enable = stmpe801_enable, | |
442 | }; | |
443 | ||
27e34995 | 444 | /* |
1cda2394 | 445 | * Touchscreen (STMPE811 or STMPE610) |
27e34995 RV |
446 | */ |
447 | ||
448 | static struct resource stmpe_ts_resources[] = { | |
449 | { | |
450 | .name = "TOUCH_DET", | |
27e34995 RV |
451 | .flags = IORESOURCE_IRQ, |
452 | }, | |
453 | { | |
454 | .name = "FIFO_TH", | |
27e34995 RV |
455 | .flags = IORESOURCE_IRQ, |
456 | }, | |
457 | }; | |
458 | ||
6bbb3c4c | 459 | static const struct mfd_cell stmpe_ts_cell = { |
27e34995 | 460 | .name = "stmpe-ts", |
037db524 | 461 | .of_compatible = "st,stmpe-ts", |
27e34995 RV |
462 | .resources = stmpe_ts_resources, |
463 | .num_resources = ARRAY_SIZE(stmpe_ts_resources), | |
464 | }; | |
465 | ||
466 | /* | |
1cda2394 | 467 | * STMPE811 or STMPE610 |
27e34995 RV |
468 | */ |
469 | ||
470 | static const u8 stmpe811_regs[] = { | |
471 | [STMPE_IDX_CHIP_ID] = STMPE811_REG_CHIP_ID, | |
0f4be8cf PC |
472 | [STMPE_IDX_SYS_CTRL] = STMPE811_REG_SYS_CTRL, |
473 | [STMPE_IDX_SYS_CTRL2] = STMPE811_REG_SYS_CTRL2, | |
27e34995 RV |
474 | [STMPE_IDX_ICR_LSB] = STMPE811_REG_INT_CTRL, |
475 | [STMPE_IDX_IER_LSB] = STMPE811_REG_INT_EN, | |
476 | [STMPE_IDX_ISR_MSB] = STMPE811_REG_INT_STA, | |
477 | [STMPE_IDX_GPMR_LSB] = STMPE811_REG_GPIO_MP_STA, | |
478 | [STMPE_IDX_GPSR_LSB] = STMPE811_REG_GPIO_SET_PIN, | |
479 | [STMPE_IDX_GPCR_LSB] = STMPE811_REG_GPIO_CLR_PIN, | |
480 | [STMPE_IDX_GPDR_LSB] = STMPE811_REG_GPIO_DIR, | |
481 | [STMPE_IDX_GPRER_LSB] = STMPE811_REG_GPIO_RE, | |
482 | [STMPE_IDX_GPFER_LSB] = STMPE811_REG_GPIO_FE, | |
483 | [STMPE_IDX_GPAFR_U_MSB] = STMPE811_REG_GPIO_AF, | |
484 | [STMPE_IDX_IEGPIOR_LSB] = STMPE811_REG_GPIO_INT_EN, | |
485 | [STMPE_IDX_ISGPIOR_MSB] = STMPE811_REG_GPIO_INT_STA, | |
897ac667 | 486 | [STMPE_IDX_GPEDR_LSB] = STMPE811_REG_GPIO_ED, |
27e34995 RV |
487 | }; |
488 | ||
489 | static struct stmpe_variant_block stmpe811_blocks[] = { | |
490 | { | |
491 | .cell = &stmpe_gpio_cell, | |
492 | .irq = STMPE811_IRQ_GPIOC, | |
493 | .block = STMPE_BLOCK_GPIO, | |
494 | }, | |
495 | { | |
496 | .cell = &stmpe_ts_cell, | |
497 | .irq = STMPE811_IRQ_TOUCH_DET, | |
498 | .block = STMPE_BLOCK_TOUCHSCREEN, | |
499 | }, | |
500 | }; | |
501 | ||
502 | static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks, | |
503 | bool enable) | |
504 | { | |
505 | unsigned int mask = 0; | |
506 | ||
507 | if (blocks & STMPE_BLOCK_GPIO) | |
508 | mask |= STMPE811_SYS_CTRL2_GPIO_OFF; | |
509 | ||
510 | if (blocks & STMPE_BLOCK_ADC) | |
511 | mask |= STMPE811_SYS_CTRL2_ADC_OFF; | |
512 | ||
513 | if (blocks & STMPE_BLOCK_TOUCHSCREEN) | |
514 | mask |= STMPE811_SYS_CTRL2_TSC_OFF; | |
515 | ||
0f4be8cf | 516 | return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2], mask, |
27e34995 RV |
517 | enable ? 0 : mask); |
518 | } | |
519 | ||
520 | static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block) | |
521 | { | |
522 | /* 0 for touchscreen, 1 for GPIO */ | |
523 | return block != STMPE_BLOCK_TOUCHSCREEN; | |
524 | } | |
525 | ||
526 | static struct stmpe_variant_info stmpe811 = { | |
527 | .name = "stmpe811", | |
528 | .id_val = 0x0811, | |
529 | .id_mask = 0xffff, | |
530 | .num_gpios = 8, | |
531 | .af_bits = 1, | |
532 | .regs = stmpe811_regs, | |
533 | .blocks = stmpe811_blocks, | |
534 | .num_blocks = ARRAY_SIZE(stmpe811_blocks), | |
535 | .num_irqs = STMPE811_NR_INTERNAL_IRQS, | |
536 | .enable = stmpe811_enable, | |
537 | .get_altfunc = stmpe811_get_altfunc, | |
538 | }; | |
539 | ||
1cda2394 VK |
540 | /* Similar to 811, except number of gpios */ |
541 | static struct stmpe_variant_info stmpe610 = { | |
542 | .name = "stmpe610", | |
543 | .id_val = 0x0811, | |
544 | .id_mask = 0xffff, | |
545 | .num_gpios = 6, | |
546 | .af_bits = 1, | |
547 | .regs = stmpe811_regs, | |
548 | .blocks = stmpe811_blocks, | |
549 | .num_blocks = ARRAY_SIZE(stmpe811_blocks), | |
550 | .num_irqs = STMPE811_NR_INTERNAL_IRQS, | |
551 | .enable = stmpe811_enable, | |
552 | .get_altfunc = stmpe811_get_altfunc, | |
553 | }; | |
554 | ||
6bb9f0d9 PC |
555 | /* |
556 | * STMPE1600 | |
557 | * Compared to all others STMPE variant, LSB and MSB regs are located in this | |
558 | * order : LSB addr | |
559 | * MSB addr + 1 | |
560 | * As there is only 2 * 8bits registers for GPMR/GPSR/IEGPIOPR, CSB index is MSB registers | |
561 | */ | |
562 | ||
563 | static const u8 stmpe1600_regs[] = { | |
564 | [STMPE_IDX_CHIP_ID] = STMPE1600_REG_CHIP_ID, | |
565 | [STMPE_IDX_SYS_CTRL] = STMPE1600_REG_SYS_CTRL, | |
566 | [STMPE_IDX_ICR_LSB] = STMPE1600_REG_SYS_CTRL, | |
567 | [STMPE_IDX_GPMR_LSB] = STMPE1600_REG_GPMR_LSB, | |
568 | [STMPE_IDX_GPMR_CSB] = STMPE1600_REG_GPMR_MSB, | |
569 | [STMPE_IDX_GPSR_LSB] = STMPE1600_REG_GPSR_LSB, | |
570 | [STMPE_IDX_GPSR_CSB] = STMPE1600_REG_GPSR_MSB, | |
b97eef5d HF |
571 | [STMPE_IDX_GPCR_LSB] = STMPE1600_REG_GPSR_LSB, |
572 | [STMPE_IDX_GPCR_CSB] = STMPE1600_REG_GPSR_MSB, | |
6bb9f0d9 PC |
573 | [STMPE_IDX_GPDR_LSB] = STMPE1600_REG_GPDR_LSB, |
574 | [STMPE_IDX_GPDR_CSB] = STMPE1600_REG_GPDR_MSB, | |
575 | [STMPE_IDX_IEGPIOR_LSB] = STMPE1600_REG_IEGPIOR_LSB, | |
576 | [STMPE_IDX_IEGPIOR_CSB] = STMPE1600_REG_IEGPIOR_MSB, | |
577 | [STMPE_IDX_ISGPIOR_LSB] = STMPE1600_REG_ISGPIOR_LSB, | |
578 | }; | |
579 | ||
580 | static struct stmpe_variant_block stmpe1600_blocks[] = { | |
581 | { | |
582 | .cell = &stmpe_gpio_cell, | |
583 | .irq = 0, | |
584 | .block = STMPE_BLOCK_GPIO, | |
585 | }, | |
586 | }; | |
587 | ||
588 | static int stmpe1600_enable(struct stmpe *stmpe, unsigned int blocks, | |
589 | bool enable) | |
590 | { | |
591 | if (blocks & STMPE_BLOCK_GPIO) | |
592 | return 0; | |
593 | else | |
594 | return -EINVAL; | |
595 | } | |
596 | ||
597 | static struct stmpe_variant_info stmpe1600 = { | |
598 | .name = "stmpe1600", | |
599 | .id_val = STMPE1600_ID, | |
600 | .id_mask = 0xffff, | |
601 | .num_gpios = 16, | |
602 | .af_bits = 0, | |
603 | .regs = stmpe1600_regs, | |
604 | .blocks = stmpe1600_blocks, | |
605 | .num_blocks = ARRAY_SIZE(stmpe1600_blocks), | |
606 | .num_irqs = STMPE1600_NR_INTERNAL_IRQS, | |
607 | .enable = stmpe1600_enable, | |
608 | }; | |
609 | ||
27e34995 RV |
610 | /* |
611 | * STMPE1601 | |
612 | */ | |
613 | ||
614 | static const u8 stmpe1601_regs[] = { | |
615 | [STMPE_IDX_CHIP_ID] = STMPE1601_REG_CHIP_ID, | |
0f4be8cf PC |
616 | [STMPE_IDX_SYS_CTRL] = STMPE1601_REG_SYS_CTRL, |
617 | [STMPE_IDX_SYS_CTRL2] = STMPE1601_REG_SYS_CTRL2, | |
27e34995 | 618 | [STMPE_IDX_ICR_LSB] = STMPE1601_REG_ICR_LSB, |
897ac667 | 619 | [STMPE_IDX_IER_MSB] = STMPE1601_REG_IER_MSB, |
27e34995 RV |
620 | [STMPE_IDX_IER_LSB] = STMPE1601_REG_IER_LSB, |
621 | [STMPE_IDX_ISR_MSB] = STMPE1601_REG_ISR_MSB, | |
622 | [STMPE_IDX_GPMR_LSB] = STMPE1601_REG_GPIO_MP_LSB, | |
897ac667 | 623 | [STMPE_IDX_GPMR_CSB] = STMPE1601_REG_GPIO_MP_MSB, |
27e34995 | 624 | [STMPE_IDX_GPSR_LSB] = STMPE1601_REG_GPIO_SET_LSB, |
897ac667 | 625 | [STMPE_IDX_GPSR_CSB] = STMPE1601_REG_GPIO_SET_MSB, |
27e34995 | 626 | [STMPE_IDX_GPCR_LSB] = STMPE1601_REG_GPIO_CLR_LSB, |
897ac667 | 627 | [STMPE_IDX_GPCR_CSB] = STMPE1601_REG_GPIO_CLR_MSB, |
27e34995 | 628 | [STMPE_IDX_GPDR_LSB] = STMPE1601_REG_GPIO_SET_DIR_LSB, |
897ac667 PC |
629 | [STMPE_IDX_GPDR_CSB] = STMPE1601_REG_GPIO_SET_DIR_MSB, |
630 | [STMPE_IDX_GPEDR_LSB] = STMPE1601_REG_GPIO_ED_LSB, | |
631 | [STMPE_IDX_GPEDR_CSB] = STMPE1601_REG_GPIO_ED_MSB, | |
27e34995 | 632 | [STMPE_IDX_GPRER_LSB] = STMPE1601_REG_GPIO_RE_LSB, |
897ac667 | 633 | [STMPE_IDX_GPRER_CSB] = STMPE1601_REG_GPIO_RE_MSB, |
27e34995 | 634 | [STMPE_IDX_GPFER_LSB] = STMPE1601_REG_GPIO_FE_LSB, |
897ac667 | 635 | [STMPE_IDX_GPFER_CSB] = STMPE1601_REG_GPIO_FE_MSB, |
80e1dd82 | 636 | [STMPE_IDX_GPPUR_LSB] = STMPE1601_REG_GPIO_PU_LSB, |
27e34995 RV |
637 | [STMPE_IDX_GPAFR_U_MSB] = STMPE1601_REG_GPIO_AF_U_MSB, |
638 | [STMPE_IDX_IEGPIOR_LSB] = STMPE1601_REG_INT_EN_GPIO_MASK_LSB, | |
897ac667 | 639 | [STMPE_IDX_IEGPIOR_CSB] = STMPE1601_REG_INT_EN_GPIO_MASK_MSB, |
27e34995 | 640 | [STMPE_IDX_ISGPIOR_MSB] = STMPE1601_REG_INT_STA_GPIO_MSB, |
27e34995 RV |
641 | }; |
642 | ||
643 | static struct stmpe_variant_block stmpe1601_blocks[] = { | |
644 | { | |
645 | .cell = &stmpe_gpio_cell, | |
5204e51d | 646 | .irq = STMPE1601_IRQ_GPIOC, |
27e34995 RV |
647 | .block = STMPE_BLOCK_GPIO, |
648 | }, | |
649 | { | |
650 | .cell = &stmpe_keypad_cell, | |
5204e51d | 651 | .irq = STMPE1601_IRQ_KEYPAD, |
27e34995 RV |
652 | .block = STMPE_BLOCK_KEYPAD, |
653 | }, | |
b273c5e0 LW |
654 | { |
655 | .cell = &stmpe_pwm_cell, | |
656 | .irq = STMPE1601_IRQ_PWM0, | |
657 | .block = STMPE_BLOCK_PWM, | |
658 | }, | |
27e34995 RV |
659 | }; |
660 | ||
5981f4e6 SI |
661 | /* supported autosleep timeout delay (in msecs) */ |
662 | static const int stmpe_autosleep_delay[] = { | |
663 | 4, 16, 32, 64, 128, 256, 512, 1024, | |
664 | }; | |
665 | ||
666 | static int stmpe_round_timeout(int timeout) | |
667 | { | |
668 | int i; | |
669 | ||
670 | for (i = 0; i < ARRAY_SIZE(stmpe_autosleep_delay); i++) { | |
671 | if (stmpe_autosleep_delay[i] >= timeout) | |
672 | return i; | |
673 | } | |
674 | ||
675 | /* | |
676 | * requests for delays longer than supported should not return the | |
677 | * longest supported delay | |
678 | */ | |
679 | return -EINVAL; | |
680 | } | |
681 | ||
682 | static int stmpe_autosleep(struct stmpe *stmpe, int autosleep_timeout) | |
683 | { | |
684 | int ret; | |
685 | ||
686 | if (!stmpe->variant->enable_autosleep) | |
687 | return -ENOSYS; | |
688 | ||
689 | mutex_lock(&stmpe->lock); | |
690 | ret = stmpe->variant->enable_autosleep(stmpe, autosleep_timeout); | |
691 | mutex_unlock(&stmpe->lock); | |
692 | ||
693 | return ret; | |
694 | } | |
695 | ||
696 | /* | |
697 | * Both stmpe 1601/2403 support same layout for autosleep | |
698 | */ | |
699 | static int stmpe1601_autosleep(struct stmpe *stmpe, | |
700 | int autosleep_timeout) | |
701 | { | |
702 | int ret, timeout; | |
703 | ||
704 | /* choose the best available timeout */ | |
705 | timeout = stmpe_round_timeout(autosleep_timeout); | |
706 | if (timeout < 0) { | |
707 | dev_err(stmpe->dev, "invalid timeout\n"); | |
708 | return timeout; | |
709 | } | |
710 | ||
0f4be8cf | 711 | ret = __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2], |
5981f4e6 SI |
712 | STMPE1601_AUTOSLEEP_TIMEOUT_MASK, |
713 | timeout); | |
714 | if (ret < 0) | |
715 | return ret; | |
716 | ||
0f4be8cf | 717 | return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2], |
5981f4e6 SI |
718 | STPME1601_AUTOSLEEP_ENABLE, |
719 | STPME1601_AUTOSLEEP_ENABLE); | |
720 | } | |
721 | ||
27e34995 RV |
722 | static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks, |
723 | bool enable) | |
724 | { | |
725 | unsigned int mask = 0; | |
726 | ||
727 | if (blocks & STMPE_BLOCK_GPIO) | |
728 | mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO; | |
b69d2ad6 LW |
729 | else |
730 | mask &= ~STMPE1601_SYS_CTRL_ENABLE_GPIO; | |
27e34995 RV |
731 | |
732 | if (blocks & STMPE_BLOCK_KEYPAD) | |
733 | mask |= STMPE1601_SYS_CTRL_ENABLE_KPC; | |
b69d2ad6 LW |
734 | else |
735 | mask &= ~STMPE1601_SYS_CTRL_ENABLE_KPC; | |
736 | ||
737 | if (blocks & STMPE_BLOCK_PWM) | |
738 | mask |= STMPE1601_SYS_CTRL_ENABLE_SPWM; | |
739 | else | |
740 | mask &= ~STMPE1601_SYS_CTRL_ENABLE_SPWM; | |
27e34995 | 741 | |
0f4be8cf | 742 | return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL], mask, |
27e34995 RV |
743 | enable ? mask : 0); |
744 | } | |
745 | ||
746 | static int stmpe1601_get_altfunc(struct stmpe *stmpe, enum stmpe_block block) | |
747 | { | |
748 | switch (block) { | |
749 | case STMPE_BLOCK_PWM: | |
750 | return 2; | |
751 | ||
752 | case STMPE_BLOCK_KEYPAD: | |
753 | return 1; | |
754 | ||
755 | case STMPE_BLOCK_GPIO: | |
756 | default: | |
757 | return 0; | |
758 | } | |
759 | } | |
760 | ||
761 | static struct stmpe_variant_info stmpe1601 = { | |
762 | .name = "stmpe1601", | |
763 | .id_val = 0x0210, | |
764 | .id_mask = 0xfff0, /* at least 0x0210 and 0x0212 */ | |
765 | .num_gpios = 16, | |
766 | .af_bits = 2, | |
767 | .regs = stmpe1601_regs, | |
768 | .blocks = stmpe1601_blocks, | |
769 | .num_blocks = ARRAY_SIZE(stmpe1601_blocks), | |
770 | .num_irqs = STMPE1601_NR_INTERNAL_IRQS, | |
771 | .enable = stmpe1601_enable, | |
772 | .get_altfunc = stmpe1601_get_altfunc, | |
5981f4e6 | 773 | .enable_autosleep = stmpe1601_autosleep, |
27e34995 RV |
774 | }; |
775 | ||
230f13a5 JNG |
776 | /* |
777 | * STMPE1801 | |
778 | */ | |
779 | static const u8 stmpe1801_regs[] = { | |
780 | [STMPE_IDX_CHIP_ID] = STMPE1801_REG_CHIP_ID, | |
0f4be8cf | 781 | [STMPE_IDX_SYS_CTRL] = STMPE1801_REG_SYS_CTRL, |
230f13a5 JNG |
782 | [STMPE_IDX_ICR_LSB] = STMPE1801_REG_INT_CTRL_LOW, |
783 | [STMPE_IDX_IER_LSB] = STMPE1801_REG_INT_EN_MASK_LOW, | |
784 | [STMPE_IDX_ISR_LSB] = STMPE1801_REG_INT_STA_LOW, | |
785 | [STMPE_IDX_GPMR_LSB] = STMPE1801_REG_GPIO_MP_LOW, | |
897ac667 PC |
786 | [STMPE_IDX_GPMR_CSB] = STMPE1801_REG_GPIO_MP_MID, |
787 | [STMPE_IDX_GPMR_MSB] = STMPE1801_REG_GPIO_MP_HIGH, | |
230f13a5 | 788 | [STMPE_IDX_GPSR_LSB] = STMPE1801_REG_GPIO_SET_LOW, |
897ac667 PC |
789 | [STMPE_IDX_GPSR_CSB] = STMPE1801_REG_GPIO_SET_MID, |
790 | [STMPE_IDX_GPSR_MSB] = STMPE1801_REG_GPIO_SET_HIGH, | |
230f13a5 | 791 | [STMPE_IDX_GPCR_LSB] = STMPE1801_REG_GPIO_CLR_LOW, |
897ac667 PC |
792 | [STMPE_IDX_GPCR_CSB] = STMPE1801_REG_GPIO_CLR_MID, |
793 | [STMPE_IDX_GPCR_MSB] = STMPE1801_REG_GPIO_CLR_HIGH, | |
230f13a5 | 794 | [STMPE_IDX_GPDR_LSB] = STMPE1801_REG_GPIO_SET_DIR_LOW, |
897ac667 PC |
795 | [STMPE_IDX_GPDR_CSB] = STMPE1801_REG_GPIO_SET_DIR_MID, |
796 | [STMPE_IDX_GPDR_MSB] = STMPE1801_REG_GPIO_SET_DIR_HIGH, | |
230f13a5 | 797 | [STMPE_IDX_GPRER_LSB] = STMPE1801_REG_GPIO_RE_LOW, |
897ac667 PC |
798 | [STMPE_IDX_GPRER_CSB] = STMPE1801_REG_GPIO_RE_MID, |
799 | [STMPE_IDX_GPRER_MSB] = STMPE1801_REG_GPIO_RE_HIGH, | |
230f13a5 | 800 | [STMPE_IDX_GPFER_LSB] = STMPE1801_REG_GPIO_FE_LOW, |
897ac667 PC |
801 | [STMPE_IDX_GPFER_CSB] = STMPE1801_REG_GPIO_FE_MID, |
802 | [STMPE_IDX_GPFER_MSB] = STMPE1801_REG_GPIO_FE_HIGH, | |
80e1dd82 | 803 | [STMPE_IDX_GPPUR_LSB] = STMPE1801_REG_GPIO_PULL_UP_LOW, |
230f13a5 | 804 | [STMPE_IDX_IEGPIOR_LSB] = STMPE1801_REG_INT_EN_GPIO_MASK_LOW, |
897ac667 PC |
805 | [STMPE_IDX_IEGPIOR_CSB] = STMPE1801_REG_INT_EN_GPIO_MASK_MID, |
806 | [STMPE_IDX_IEGPIOR_MSB] = STMPE1801_REG_INT_EN_GPIO_MASK_HIGH, | |
807 | [STMPE_IDX_ISGPIOR_MSB] = STMPE1801_REG_INT_STA_GPIO_HIGH, | |
230f13a5 JNG |
808 | }; |
809 | ||
810 | static struct stmpe_variant_block stmpe1801_blocks[] = { | |
811 | { | |
812 | .cell = &stmpe_gpio_cell, | |
813 | .irq = STMPE1801_IRQ_GPIOC, | |
814 | .block = STMPE_BLOCK_GPIO, | |
815 | }, | |
816 | { | |
817 | .cell = &stmpe_keypad_cell, | |
818 | .irq = STMPE1801_IRQ_KEYPAD, | |
819 | .block = STMPE_BLOCK_KEYPAD, | |
820 | }, | |
821 | }; | |
822 | ||
823 | static int stmpe1801_enable(struct stmpe *stmpe, unsigned int blocks, | |
824 | bool enable) | |
825 | { | |
826 | unsigned int mask = 0; | |
827 | if (blocks & STMPE_BLOCK_GPIO) | |
828 | mask |= STMPE1801_MSK_INT_EN_GPIO; | |
829 | ||
830 | if (blocks & STMPE_BLOCK_KEYPAD) | |
831 | mask |= STMPE1801_MSK_INT_EN_KPC; | |
832 | ||
833 | return __stmpe_set_bits(stmpe, STMPE1801_REG_INT_EN_MASK_LOW, mask, | |
834 | enable ? mask : 0); | |
835 | } | |
836 | ||
c4dd1ba3 | 837 | static int stmpe_reset(struct stmpe *stmpe) |
230f13a5 | 838 | { |
c4dd1ba3 | 839 | u16 id_val = stmpe->variant->id_val; |
230f13a5 JNG |
840 | unsigned long timeout; |
841 | int ret = 0; | |
c4dd1ba3 PC |
842 | u8 reset_bit; |
843 | ||
844 | if (id_val == STMPE811_ID) | |
845 | /* STMPE801 and STMPE610 use bit 1 of SYS_CTRL register */ | |
846 | reset_bit = STMPE811_SYS_CTRL_RESET; | |
847 | else | |
848 | /* all other STMPE variant use bit 7 of SYS_CTRL register */ | |
849 | reset_bit = STMPE_SYS_CTRL_RESET; | |
230f13a5 | 850 | |
0f4be8cf | 851 | ret = __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL], |
c4dd1ba3 | 852 | reset_bit, reset_bit); |
230f13a5 JNG |
853 | if (ret < 0) |
854 | return ret; | |
855 | ||
f4058420 LW |
856 | msleep(10); |
857 | ||
230f13a5 JNG |
858 | timeout = jiffies + msecs_to_jiffies(100); |
859 | while (time_before(jiffies, timeout)) { | |
0f4be8cf | 860 | ret = __stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL]); |
230f13a5 JNG |
861 | if (ret < 0) |
862 | return ret; | |
c4dd1ba3 | 863 | if (!(ret & reset_bit)) |
230f13a5 JNG |
864 | return 0; |
865 | usleep_range(100, 200); | |
52397fe1 | 866 | } |
230f13a5 JNG |
867 | return -EIO; |
868 | } | |
869 | ||
870 | static struct stmpe_variant_info stmpe1801 = { | |
871 | .name = "stmpe1801", | |
872 | .id_val = STMPE1801_ID, | |
873 | .id_mask = 0xfff0, | |
874 | .num_gpios = 18, | |
875 | .af_bits = 0, | |
876 | .regs = stmpe1801_regs, | |
877 | .blocks = stmpe1801_blocks, | |
878 | .num_blocks = ARRAY_SIZE(stmpe1801_blocks), | |
879 | .num_irqs = STMPE1801_NR_INTERNAL_IRQS, | |
880 | .enable = stmpe1801_enable, | |
881 | /* stmpe1801 do not have any gpio alternate function */ | |
882 | .get_altfunc = NULL, | |
883 | }; | |
884 | ||
27e34995 RV |
885 | /* |
886 | * STMPE24XX | |
887 | */ | |
888 | ||
889 | static const u8 stmpe24xx_regs[] = { | |
890 | [STMPE_IDX_CHIP_ID] = STMPE24XX_REG_CHIP_ID, | |
0f4be8cf PC |
891 | [STMPE_IDX_SYS_CTRL] = STMPE24XX_REG_SYS_CTRL, |
892 | [STMPE_IDX_SYS_CTRL2] = STMPE24XX_REG_SYS_CTRL2, | |
27e34995 | 893 | [STMPE_IDX_ICR_LSB] = STMPE24XX_REG_ICR_LSB, |
897ac667 | 894 | [STMPE_IDX_IER_MSB] = STMPE24XX_REG_IER_MSB, |
27e34995 RV |
895 | [STMPE_IDX_IER_LSB] = STMPE24XX_REG_IER_LSB, |
896 | [STMPE_IDX_ISR_MSB] = STMPE24XX_REG_ISR_MSB, | |
897 | [STMPE_IDX_GPMR_LSB] = STMPE24XX_REG_GPMR_LSB, | |
897ac667 PC |
898 | [STMPE_IDX_GPMR_CSB] = STMPE24XX_REG_GPMR_CSB, |
899 | [STMPE_IDX_GPMR_MSB] = STMPE24XX_REG_GPMR_MSB, | |
27e34995 | 900 | [STMPE_IDX_GPSR_LSB] = STMPE24XX_REG_GPSR_LSB, |
897ac667 PC |
901 | [STMPE_IDX_GPSR_CSB] = STMPE24XX_REG_GPSR_CSB, |
902 | [STMPE_IDX_GPSR_MSB] = STMPE24XX_REG_GPSR_MSB, | |
27e34995 | 903 | [STMPE_IDX_GPCR_LSB] = STMPE24XX_REG_GPCR_LSB, |
897ac667 PC |
904 | [STMPE_IDX_GPCR_CSB] = STMPE24XX_REG_GPCR_CSB, |
905 | [STMPE_IDX_GPCR_MSB] = STMPE24XX_REG_GPCR_MSB, | |
27e34995 | 906 | [STMPE_IDX_GPDR_LSB] = STMPE24XX_REG_GPDR_LSB, |
897ac667 PC |
907 | [STMPE_IDX_GPDR_CSB] = STMPE24XX_REG_GPDR_CSB, |
908 | [STMPE_IDX_GPDR_MSB] = STMPE24XX_REG_GPDR_MSB, | |
27e34995 | 909 | [STMPE_IDX_GPRER_LSB] = STMPE24XX_REG_GPRER_LSB, |
897ac667 PC |
910 | [STMPE_IDX_GPRER_CSB] = STMPE24XX_REG_GPRER_CSB, |
911 | [STMPE_IDX_GPRER_MSB] = STMPE24XX_REG_GPRER_MSB, | |
27e34995 | 912 | [STMPE_IDX_GPFER_LSB] = STMPE24XX_REG_GPFER_LSB, |
897ac667 PC |
913 | [STMPE_IDX_GPFER_CSB] = STMPE24XX_REG_GPFER_CSB, |
914 | [STMPE_IDX_GPFER_MSB] = STMPE24XX_REG_GPFER_MSB, | |
80e1dd82 LW |
915 | [STMPE_IDX_GPPUR_LSB] = STMPE24XX_REG_GPPUR_LSB, |
916 | [STMPE_IDX_GPPDR_LSB] = STMPE24XX_REG_GPPDR_LSB, | |
27e34995 RV |
917 | [STMPE_IDX_GPAFR_U_MSB] = STMPE24XX_REG_GPAFR_U_MSB, |
918 | [STMPE_IDX_IEGPIOR_LSB] = STMPE24XX_REG_IEGPIOR_LSB, | |
897ac667 PC |
919 | [STMPE_IDX_IEGPIOR_CSB] = STMPE24XX_REG_IEGPIOR_CSB, |
920 | [STMPE_IDX_IEGPIOR_MSB] = STMPE24XX_REG_IEGPIOR_MSB, | |
27e34995 | 921 | [STMPE_IDX_ISGPIOR_MSB] = STMPE24XX_REG_ISGPIOR_MSB, |
897ac667 PC |
922 | [STMPE_IDX_GPEDR_LSB] = STMPE24XX_REG_GPEDR_LSB, |
923 | [STMPE_IDX_GPEDR_CSB] = STMPE24XX_REG_GPEDR_CSB, | |
27e34995 RV |
924 | [STMPE_IDX_GPEDR_MSB] = STMPE24XX_REG_GPEDR_MSB, |
925 | }; | |
926 | ||
927 | static struct stmpe_variant_block stmpe24xx_blocks[] = { | |
928 | { | |
929 | .cell = &stmpe_gpio_cell, | |
930 | .irq = STMPE24XX_IRQ_GPIOC, | |
931 | .block = STMPE_BLOCK_GPIO, | |
932 | }, | |
933 | { | |
934 | .cell = &stmpe_keypad_cell, | |
935 | .irq = STMPE24XX_IRQ_KEYPAD, | |
936 | .block = STMPE_BLOCK_KEYPAD, | |
937 | }, | |
b273c5e0 LW |
938 | { |
939 | .cell = &stmpe_pwm_cell, | |
940 | .irq = STMPE24XX_IRQ_PWM0, | |
941 | .block = STMPE_BLOCK_PWM, | |
942 | }, | |
27e34995 RV |
943 | }; |
944 | ||
945 | static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks, | |
946 | bool enable) | |
947 | { | |
948 | unsigned int mask = 0; | |
949 | ||
950 | if (blocks & STMPE_BLOCK_GPIO) | |
951 | mask |= STMPE24XX_SYS_CTRL_ENABLE_GPIO; | |
952 | ||
953 | if (blocks & STMPE_BLOCK_KEYPAD) | |
954 | mask |= STMPE24XX_SYS_CTRL_ENABLE_KPC; | |
955 | ||
0f4be8cf | 956 | return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL], mask, |
27e34995 RV |
957 | enable ? mask : 0); |
958 | } | |
959 | ||
960 | static int stmpe24xx_get_altfunc(struct stmpe *stmpe, enum stmpe_block block) | |
961 | { | |
962 | switch (block) { | |
963 | case STMPE_BLOCK_ROTATOR: | |
964 | return 2; | |
965 | ||
966 | case STMPE_BLOCK_KEYPAD: | |
f6d10341 | 967 | case STMPE_BLOCK_PWM: |
27e34995 RV |
968 | return 1; |
969 | ||
970 | case STMPE_BLOCK_GPIO: | |
971 | default: | |
972 | return 0; | |
973 | } | |
974 | } | |
975 | ||
976 | static struct stmpe_variant_info stmpe2401 = { | |
977 | .name = "stmpe2401", | |
978 | .id_val = 0x0101, | |
979 | .id_mask = 0xffff, | |
980 | .num_gpios = 24, | |
981 | .af_bits = 2, | |
982 | .regs = stmpe24xx_regs, | |
983 | .blocks = stmpe24xx_blocks, | |
984 | .num_blocks = ARRAY_SIZE(stmpe24xx_blocks), | |
985 | .num_irqs = STMPE24XX_NR_INTERNAL_IRQS, | |
986 | .enable = stmpe24xx_enable, | |
987 | .get_altfunc = stmpe24xx_get_altfunc, | |
988 | }; | |
989 | ||
990 | static struct stmpe_variant_info stmpe2403 = { | |
991 | .name = "stmpe2403", | |
992 | .id_val = 0x0120, | |
993 | .id_mask = 0xffff, | |
994 | .num_gpios = 24, | |
995 | .af_bits = 2, | |
996 | .regs = stmpe24xx_regs, | |
997 | .blocks = stmpe24xx_blocks, | |
998 | .num_blocks = ARRAY_SIZE(stmpe24xx_blocks), | |
999 | .num_irqs = STMPE24XX_NR_INTERNAL_IRQS, | |
1000 | .enable = stmpe24xx_enable, | |
1001 | .get_altfunc = stmpe24xx_get_altfunc, | |
5981f4e6 | 1002 | .enable_autosleep = stmpe1601_autosleep, /* same as stmpe1601 */ |
27e34995 RV |
1003 | }; |
1004 | ||
e31f9b82 | 1005 | static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = { |
1cda2394 | 1006 | [STMPE610] = &stmpe610, |
7f7f4ea1 | 1007 | [STMPE801] = &stmpe801, |
27e34995 | 1008 | [STMPE811] = &stmpe811, |
6bb9f0d9 | 1009 | [STMPE1600] = &stmpe1600, |
27e34995 | 1010 | [STMPE1601] = &stmpe1601, |
230f13a5 | 1011 | [STMPE1801] = &stmpe1801, |
27e34995 RV |
1012 | [STMPE2401] = &stmpe2401, |
1013 | [STMPE2403] = &stmpe2403, | |
1014 | }; | |
1015 | ||
e31f9b82 CB |
1016 | /* |
1017 | * These devices can be connected in a 'no-irq' configuration - the irq pin | |
1018 | * is not used and the device cannot interrupt the CPU. Here we only list | |
1019 | * devices which support this configuration - the driver will fail probing | |
1020 | * for any devices not listed here which are configured in this way. | |
1021 | */ | |
1022 | static struct stmpe_variant_info *stmpe_noirq_variant_info[STMPE_NBR_PARTS] = { | |
1023 | [STMPE801] = &stmpe801_noirq, | |
1024 | }; | |
1025 | ||
27e34995 RV |
1026 | static irqreturn_t stmpe_irq(int irq, void *data) |
1027 | { | |
1028 | struct stmpe *stmpe = data; | |
1029 | struct stmpe_variant_info *variant = stmpe->variant; | |
1030 | int num = DIV_ROUND_UP(variant->num_irqs, 8); | |
230f13a5 | 1031 | u8 israddr; |
7929fa77 | 1032 | u8 isr[3]; |
27e34995 RV |
1033 | int ret; |
1034 | int i; | |
1035 | ||
6bb9f0d9 PC |
1036 | if (variant->id_val == STMPE801_ID || |
1037 | variant->id_val == STMPE1600_ID) { | |
76f93992 LJ |
1038 | int base = irq_create_mapping(stmpe->domain, 0); |
1039 | ||
1040 | handle_nested_irq(base); | |
7f7f4ea1 VK |
1041 | return IRQ_HANDLED; |
1042 | } | |
1043 | ||
230f13a5 JNG |
1044 | if (variant->id_val == STMPE1801_ID) |
1045 | israddr = stmpe->regs[STMPE_IDX_ISR_LSB]; | |
1046 | else | |
1047 | israddr = stmpe->regs[STMPE_IDX_ISR_MSB]; | |
1048 | ||
27e34995 RV |
1049 | ret = stmpe_block_read(stmpe, israddr, num, isr); |
1050 | if (ret < 0) | |
1051 | return IRQ_NONE; | |
1052 | ||
1053 | for (i = 0; i < num; i++) { | |
1054 | int bank = num - i - 1; | |
1055 | u8 status = isr[i]; | |
1056 | u8 clear; | |
1057 | ||
1058 | status &= stmpe->ier[bank]; | |
1059 | if (!status) | |
1060 | continue; | |
1061 | ||
1062 | clear = status; | |
1063 | while (status) { | |
1064 | int bit = __ffs(status); | |
1065 | int line = bank * 8 + bit; | |
76f93992 | 1066 | int nestedirq = irq_create_mapping(stmpe->domain, line); |
27e34995 | 1067 | |
76f93992 | 1068 | handle_nested_irq(nestedirq); |
27e34995 RV |
1069 | status &= ~(1 << bit); |
1070 | } | |
1071 | ||
1072 | stmpe_reg_write(stmpe, israddr + i, clear); | |
1073 | } | |
1074 | ||
1075 | return IRQ_HANDLED; | |
1076 | } | |
1077 | ||
43b8c084 | 1078 | static void stmpe_irq_lock(struct irq_data *data) |
27e34995 | 1079 | { |
43b8c084 | 1080 | struct stmpe *stmpe = irq_data_get_irq_chip_data(data); |
27e34995 RV |
1081 | |
1082 | mutex_lock(&stmpe->irq_lock); | |
1083 | } | |
1084 | ||
43b8c084 | 1085 | static void stmpe_irq_sync_unlock(struct irq_data *data) |
27e34995 | 1086 | { |
43b8c084 | 1087 | struct stmpe *stmpe = irq_data_get_irq_chip_data(data); |
27e34995 RV |
1088 | struct stmpe_variant_info *variant = stmpe->variant; |
1089 | int num = DIV_ROUND_UP(variant->num_irqs, 8); | |
1090 | int i; | |
1091 | ||
1092 | for (i = 0; i < num; i++) { | |
1093 | u8 new = stmpe->ier[i]; | |
1094 | u8 old = stmpe->oldier[i]; | |
1095 | ||
1096 | if (new == old) | |
1097 | continue; | |
1098 | ||
1099 | stmpe->oldier[i] = new; | |
897ac667 | 1100 | stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_IER_LSB + i], new); |
27e34995 RV |
1101 | } |
1102 | ||
1103 | mutex_unlock(&stmpe->irq_lock); | |
1104 | } | |
1105 | ||
43b8c084 | 1106 | static void stmpe_irq_mask(struct irq_data *data) |
27e34995 | 1107 | { |
43b8c084 | 1108 | struct stmpe *stmpe = irq_data_get_irq_chip_data(data); |
76f93992 | 1109 | int offset = data->hwirq; |
27e34995 RV |
1110 | int regoffset = offset / 8; |
1111 | int mask = 1 << (offset % 8); | |
1112 | ||
1113 | stmpe->ier[regoffset] &= ~mask; | |
1114 | } | |
1115 | ||
43b8c084 | 1116 | static void stmpe_irq_unmask(struct irq_data *data) |
27e34995 | 1117 | { |
43b8c084 | 1118 | struct stmpe *stmpe = irq_data_get_irq_chip_data(data); |
76f93992 | 1119 | int offset = data->hwirq; |
27e34995 RV |
1120 | int regoffset = offset / 8; |
1121 | int mask = 1 << (offset % 8); | |
1122 | ||
1123 | stmpe->ier[regoffset] |= mask; | |
1124 | } | |
1125 | ||
1126 | static struct irq_chip stmpe_irq_chip = { | |
1127 | .name = "stmpe", | |
43b8c084 MB |
1128 | .irq_bus_lock = stmpe_irq_lock, |
1129 | .irq_bus_sync_unlock = stmpe_irq_sync_unlock, | |
1130 | .irq_mask = stmpe_irq_mask, | |
1131 | .irq_unmask = stmpe_irq_unmask, | |
27e34995 RV |
1132 | }; |
1133 | ||
76f93992 LJ |
1134 | static int stmpe_irq_map(struct irq_domain *d, unsigned int virq, |
1135 | irq_hw_number_t hwirq) | |
27e34995 | 1136 | { |
76f93992 | 1137 | struct stmpe *stmpe = d->host_data; |
7f7f4ea1 | 1138 | struct irq_chip *chip = NULL; |
27e34995 | 1139 | |
7f7f4ea1 VK |
1140 | if (stmpe->variant->id_val != STMPE801_ID) |
1141 | chip = &stmpe_irq_chip; | |
1142 | ||
76f93992 LJ |
1143 | irq_set_chip_data(virq, stmpe); |
1144 | irq_set_chip_and_handler(virq, chip, handle_edge_irq); | |
1145 | irq_set_nested_thread(virq, 1); | |
76f93992 | 1146 | irq_set_noprobe(virq); |
27e34995 RV |
1147 | |
1148 | return 0; | |
1149 | } | |
1150 | ||
76f93992 | 1151 | static void stmpe_irq_unmap(struct irq_domain *d, unsigned int virq) |
27e34995 | 1152 | { |
76f93992 LJ |
1153 | irq_set_chip_and_handler(virq, NULL, NULL); |
1154 | irq_set_chip_data(virq, NULL); | |
1155 | } | |
1156 | ||
7ce7b26f | 1157 | static const struct irq_domain_ops stmpe_irq_ops = { |
76f93992 LJ |
1158 | .map = stmpe_irq_map, |
1159 | .unmap = stmpe_irq_unmap, | |
1160 | .xlate = irq_domain_xlate_twocell, | |
1161 | }; | |
1162 | ||
612b95cd | 1163 | static int stmpe_irq_init(struct stmpe *stmpe, struct device_node *np) |
76f93992 | 1164 | { |
b20a4371 | 1165 | int base = 0; |
76f93992 LJ |
1166 | int num_irqs = stmpe->variant->num_irqs; |
1167 | ||
b20a4371 LJ |
1168 | stmpe->domain = irq_domain_add_simple(np, num_irqs, base, |
1169 | &stmpe_irq_ops, stmpe); | |
76f93992 LJ |
1170 | if (!stmpe->domain) { |
1171 | dev_err(stmpe->dev, "Failed to create irqdomain\n"); | |
1172 | return -ENOSYS; | |
27e34995 | 1173 | } |
76f93992 LJ |
1174 | |
1175 | return 0; | |
27e34995 RV |
1176 | } |
1177 | ||
612b95cd | 1178 | static int stmpe_chip_init(struct stmpe *stmpe) |
27e34995 RV |
1179 | { |
1180 | unsigned int irq_trigger = stmpe->pdata->irq_trigger; | |
5981f4e6 | 1181 | int autosleep_timeout = stmpe->pdata->autosleep_timeout; |
27e34995 | 1182 | struct stmpe_variant_info *variant = stmpe->variant; |
e31f9b82 | 1183 | u8 icr = 0; |
27e34995 RV |
1184 | unsigned int id; |
1185 | u8 data[2]; | |
1186 | int ret; | |
1187 | ||
1188 | ret = stmpe_block_read(stmpe, stmpe->regs[STMPE_IDX_CHIP_ID], | |
1189 | ARRAY_SIZE(data), data); | |
1190 | if (ret < 0) | |
1191 | return ret; | |
1192 | ||
1193 | id = (data[0] << 8) | data[1]; | |
1194 | if ((id & variant->id_mask) != variant->id_val) { | |
1195 | dev_err(stmpe->dev, "unknown chip id: %#x\n", id); | |
1196 | return -EINVAL; | |
1197 | } | |
1198 | ||
1199 | dev_info(stmpe->dev, "%s detected, chip id: %#x\n", variant->name, id); | |
1200 | ||
1201 | /* Disable all modules -- subdrivers should enable what they need. */ | |
1202 | ret = stmpe_disable(stmpe, ~0); | |
1203 | if (ret) | |
1204 | return ret; | |
1205 | ||
c4dd1ba3 PC |
1206 | ret = stmpe_reset(stmpe); |
1207 | if (ret < 0) | |
1208 | return ret; | |
230f13a5 | 1209 | |
e31f9b82 | 1210 | if (stmpe->irq >= 0) { |
6bb9f0d9 | 1211 | if (id == STMPE801_ID || id == STMPE1600_ID) |
c16bee78 | 1212 | icr = STMPE_SYS_CTRL_INT_EN; |
7f7f4ea1 | 1213 | else |
e31f9b82 | 1214 | icr = STMPE_ICR_LSB_GIM; |
27e34995 | 1215 | |
6bb9f0d9 PC |
1216 | /* STMPE801 and STMPE1600 don't support Edge interrupts */ |
1217 | if (id != STMPE801_ID && id != STMPE1600_ID) { | |
e31f9b82 CB |
1218 | if (irq_trigger == IRQF_TRIGGER_FALLING || |
1219 | irq_trigger == IRQF_TRIGGER_RISING) | |
1220 | icr |= STMPE_ICR_LSB_EDGE; | |
1221 | } | |
1222 | ||
1223 | if (irq_trigger == IRQF_TRIGGER_RISING || | |
1224 | irq_trigger == IRQF_TRIGGER_HIGH) { | |
6bb9f0d9 | 1225 | if (id == STMPE801_ID || id == STMPE1600_ID) |
c16bee78 | 1226 | icr |= STMPE_SYS_CTRL_INT_HI; |
e31f9b82 CB |
1227 | else |
1228 | icr |= STMPE_ICR_LSB_HIGH; | |
1229 | } | |
7f7f4ea1 | 1230 | } |
27e34995 | 1231 | |
5981f4e6 SI |
1232 | if (stmpe->pdata->autosleep) { |
1233 | ret = stmpe_autosleep(stmpe, autosleep_timeout); | |
1234 | if (ret) | |
1235 | return ret; | |
1236 | } | |
1237 | ||
27e34995 RV |
1238 | return stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_ICR_LSB], icr); |
1239 | } | |
1240 | ||
6bbb3c4c | 1241 | static int stmpe_add_device(struct stmpe *stmpe, const struct mfd_cell *cell) |
27e34995 RV |
1242 | { |
1243 | return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1, | |
9e9dc7d9 | 1244 | NULL, 0, stmpe->domain); |
27e34995 RV |
1245 | } |
1246 | ||
612b95cd | 1247 | static int stmpe_devices_init(struct stmpe *stmpe) |
27e34995 RV |
1248 | { |
1249 | struct stmpe_variant_info *variant = stmpe->variant; | |
1250 | unsigned int platform_blocks = stmpe->pdata->blocks; | |
1251 | int ret = -EINVAL; | |
7da0cbfc | 1252 | int i, j; |
27e34995 RV |
1253 | |
1254 | for (i = 0; i < variant->num_blocks; i++) { | |
1255 | struct stmpe_variant_block *block = &variant->blocks[i]; | |
1256 | ||
1257 | if (!(platform_blocks & block->block)) | |
1258 | continue; | |
1259 | ||
7da0cbfc LJ |
1260 | for (j = 0; j < block->cell->num_resources; j++) { |
1261 | struct resource *res = | |
1262 | (struct resource *) &block->cell->resources[j]; | |
1263 | ||
1264 | /* Dynamically fill in a variant's IRQ. */ | |
1265 | if (res->flags & IORESOURCE_IRQ) | |
1266 | res->start = res->end = block->irq + j; | |
1267 | } | |
1268 | ||
27e34995 | 1269 | platform_blocks &= ~block->block; |
7da0cbfc | 1270 | ret = stmpe_add_device(stmpe, block->cell); |
27e34995 RV |
1271 | if (ret) |
1272 | return ret; | |
1273 | } | |
1274 | ||
1275 | if (platform_blocks) | |
1276 | dev_warn(stmpe->dev, | |
1277 | "platform wants blocks (%#x) not present on variant", | |
1278 | platform_blocks); | |
1279 | ||
1280 | return ret; | |
1281 | } | |
1282 | ||
a9c4055d MB |
1283 | static void stmpe_of_probe(struct stmpe_platform_data *pdata, |
1284 | struct device_node *np) | |
909582ca LJ |
1285 | { |
1286 | struct device_node *child; | |
1287 | ||
408a3fa8 GF |
1288 | pdata->id = of_alias_get_id(np, "stmpe-i2c"); |
1289 | if (pdata->id < 0) | |
1290 | pdata->id = -1; | |
1291 | ||
851ec596 SC |
1292 | pdata->irq_gpio = of_get_named_gpio_flags(np, "irq-gpio", 0, |
1293 | &pdata->irq_trigger); | |
1294 | if (gpio_is_valid(pdata->irq_gpio)) | |
1295 | pdata->irq_over_gpio = 1; | |
1296 | else | |
1297 | pdata->irq_trigger = IRQF_TRIGGER_NONE; | |
ac713cc9 | 1298 | |
909582ca LJ |
1299 | of_property_read_u32(np, "st,autosleep-timeout", |
1300 | &pdata->autosleep_timeout); | |
1301 | ||
1302 | pdata->autosleep = (pdata->autosleep_timeout) ? true : false; | |
1303 | ||
1304 | for_each_child_of_node(np, child) { | |
1305 | if (!strcmp(child->name, "stmpe_gpio")) { | |
1306 | pdata->blocks |= STMPE_BLOCK_GPIO; | |
ac713cc9 | 1307 | } else if (!strcmp(child->name, "stmpe_keypad")) { |
909582ca | 1308 | pdata->blocks |= STMPE_BLOCK_KEYPAD; |
ac713cc9 | 1309 | } else if (!strcmp(child->name, "stmpe_touchscreen")) { |
909582ca | 1310 | pdata->blocks |= STMPE_BLOCK_TOUCHSCREEN; |
ac713cc9 | 1311 | } else if (!strcmp(child->name, "stmpe_adc")) { |
909582ca | 1312 | pdata->blocks |= STMPE_BLOCK_ADC; |
ac713cc9 VKS |
1313 | } else if (!strcmp(child->name, "stmpe_pwm")) { |
1314 | pdata->blocks |= STMPE_BLOCK_PWM; | |
1315 | } else if (!strcmp(child->name, "stmpe_rotator")) { | |
1316 | pdata->blocks |= STMPE_BLOCK_ROTATOR; | |
909582ca LJ |
1317 | } |
1318 | } | |
1319 | } | |
1320 | ||
1a6e4b74 | 1321 | /* Called from client specific probe routines */ |
c00572bc | 1322 | int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum) |
208c4343 | 1323 | { |
fc1882dc | 1324 | struct stmpe_platform_data *pdata; |
909582ca | 1325 | struct device_node *np = ci->dev->of_node; |
27e34995 RV |
1326 | struct stmpe *stmpe; |
1327 | int ret; | |
1328 | ||
fc1882dc LW |
1329 | pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL); |
1330 | if (!pdata) | |
1331 | return -ENOMEM; | |
cb5faba9 | 1332 | |
fc1882dc | 1333 | stmpe_of_probe(pdata, np); |
a200e320 | 1334 | |
fc1882dc LW |
1335 | if (of_find_property(np, "interrupts", NULL) == NULL) |
1336 | ci->irq = -1; | |
27e34995 | 1337 | |
cb5faba9 | 1338 | stmpe = devm_kzalloc(ci->dev, sizeof(struct stmpe), GFP_KERNEL); |
27e34995 RV |
1339 | if (!stmpe) |
1340 | return -ENOMEM; | |
1341 | ||
1342 | mutex_init(&stmpe->irq_lock); | |
1343 | mutex_init(&stmpe->lock); | |
1344 | ||
1a6e4b74 VK |
1345 | stmpe->dev = ci->dev; |
1346 | stmpe->client = ci->client; | |
27e34995 | 1347 | stmpe->pdata = pdata; |
1a6e4b74 VK |
1348 | stmpe->ci = ci; |
1349 | stmpe->partnum = partnum; | |
1350 | stmpe->variant = stmpe_variant_info[partnum]; | |
27e34995 RV |
1351 | stmpe->regs = stmpe->variant->regs; |
1352 | stmpe->num_gpios = stmpe->variant->num_gpios; | |
9c9e3214 LW |
1353 | stmpe->vcc = devm_regulator_get_optional(ci->dev, "vcc"); |
1354 | if (!IS_ERR(stmpe->vcc)) { | |
1355 | ret = regulator_enable(stmpe->vcc); | |
1356 | if (ret) | |
1357 | dev_warn(ci->dev, "failed to enable VCC supply\n"); | |
1358 | } | |
1359 | stmpe->vio = devm_regulator_get_optional(ci->dev, "vio"); | |
1360 | if (!IS_ERR(stmpe->vio)) { | |
1361 | ret = regulator_enable(stmpe->vio); | |
1362 | if (ret) | |
1363 | dev_warn(ci->dev, "failed to enable VIO supply\n"); | |
1364 | } | |
1a6e4b74 | 1365 | dev_set_drvdata(stmpe->dev, stmpe); |
27e34995 | 1366 | |
1a6e4b74 VK |
1367 | if (ci->init) |
1368 | ci->init(stmpe); | |
27e34995 | 1369 | |
73de16db | 1370 | if (pdata->irq_over_gpio) { |
cb5faba9 VK |
1371 | ret = devm_gpio_request_one(ci->dev, pdata->irq_gpio, |
1372 | GPIOF_DIR_IN, "stmpe"); | |
73de16db VK |
1373 | if (ret) { |
1374 | dev_err(stmpe->dev, "failed to request IRQ GPIO: %d\n", | |
1375 | ret); | |
cb5faba9 | 1376 | return ret; |
73de16db VK |
1377 | } |
1378 | ||
1379 | stmpe->irq = gpio_to_irq(pdata->irq_gpio); | |
1380 | } else { | |
1a6e4b74 | 1381 | stmpe->irq = ci->irq; |
73de16db VK |
1382 | } |
1383 | ||
e31f9b82 CB |
1384 | if (stmpe->irq < 0) { |
1385 | /* use alternate variant info for no-irq mode, if supported */ | |
1386 | dev_info(stmpe->dev, | |
1387 | "%s configured in no-irq mode by platform data\n", | |
1388 | stmpe->variant->name); | |
1389 | if (!stmpe_noirq_variant_info[stmpe->partnum]) { | |
1390 | dev_err(stmpe->dev, | |
1391 | "%s does not support no-irq mode!\n", | |
1392 | stmpe->variant->name); | |
cb5faba9 | 1393 | return -ENODEV; |
e31f9b82 CB |
1394 | } |
1395 | stmpe->variant = stmpe_noirq_variant_info[stmpe->partnum]; | |
ac713cc9 | 1396 | } else if (pdata->irq_trigger == IRQF_TRIGGER_NONE) { |
1a5595cb | 1397 | pdata->irq_trigger = irq_get_trigger_type(stmpe->irq); |
e31f9b82 CB |
1398 | } |
1399 | ||
27e34995 RV |
1400 | ret = stmpe_chip_init(stmpe); |
1401 | if (ret) | |
cb5faba9 | 1402 | return ret; |
27e34995 | 1403 | |
e31f9b82 | 1404 | if (stmpe->irq >= 0) { |
909582ca | 1405 | ret = stmpe_irq_init(stmpe, np); |
e31f9b82 | 1406 | if (ret) |
cb5faba9 | 1407 | return ret; |
27e34995 | 1408 | |
cb5faba9 VK |
1409 | ret = devm_request_threaded_irq(ci->dev, stmpe->irq, NULL, |
1410 | stmpe_irq, pdata->irq_trigger | IRQF_ONESHOT, | |
e31f9b82 CB |
1411 | "stmpe", stmpe); |
1412 | if (ret) { | |
1413 | dev_err(stmpe->dev, "failed to request IRQ: %d\n", | |
1414 | ret); | |
cb5faba9 | 1415 | return ret; |
e31f9b82 | 1416 | } |
27e34995 RV |
1417 | } |
1418 | ||
1419 | ret = stmpe_devices_init(stmpe); | |
cb5faba9 VK |
1420 | if (!ret) |
1421 | return 0; | |
27e34995 | 1422 | |
cb5faba9 | 1423 | dev_err(stmpe->dev, "failed to add children\n"); |
27e34995 | 1424 | mfd_remove_devices(stmpe->dev); |
cb5faba9 | 1425 | |
27e34995 RV |
1426 | return ret; |
1427 | } | |
1428 | ||
1a6e4b74 | 1429 | int stmpe_remove(struct stmpe *stmpe) |
27e34995 | 1430 | { |
9c9e3214 LW |
1431 | if (!IS_ERR(stmpe->vio)) |
1432 | regulator_disable(stmpe->vio); | |
1433 | if (!IS_ERR(stmpe->vcc)) | |
1434 | regulator_disable(stmpe->vcc); | |
1435 | ||
27e34995 RV |
1436 | mfd_remove_devices(stmpe->dev); |
1437 | ||
27e34995 RV |
1438 | return 0; |
1439 | } | |
1440 | ||
208c4343 | 1441 | #ifdef CONFIG_PM |
1a6e4b74 VK |
1442 | static int stmpe_suspend(struct device *dev) |
1443 | { | |
1444 | struct stmpe *stmpe = dev_get_drvdata(dev); | |
208c4343 | 1445 | |
e31f9b82 | 1446 | if (stmpe->irq >= 0 && device_may_wakeup(dev)) |
1a6e4b74 | 1447 | enable_irq_wake(stmpe->irq); |
27e34995 | 1448 | |
1a6e4b74 | 1449 | return 0; |
27e34995 | 1450 | } |
27e34995 | 1451 | |
1a6e4b74 | 1452 | static int stmpe_resume(struct device *dev) |
27e34995 | 1453 | { |
1a6e4b74 VK |
1454 | struct stmpe *stmpe = dev_get_drvdata(dev); |
1455 | ||
e31f9b82 | 1456 | if (stmpe->irq >= 0 && device_may_wakeup(dev)) |
1a6e4b74 VK |
1457 | disable_irq_wake(stmpe->irq); |
1458 | ||
1459 | return 0; | |
27e34995 | 1460 | } |
27e34995 | 1461 | |
1a6e4b74 VK |
1462 | const struct dev_pm_ops stmpe_dev_pm_ops = { |
1463 | .suspend = stmpe_suspend, | |
1464 | .resume = stmpe_resume, | |
1465 | }; | |
1466 | #endif |