]>
Commit | Line | Data |
---|---|---|
c942fddf | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
cbf031f4 NB |
2 | /******************************************************************************* |
3 | * Filename: target_core_xcopy.c | |
4 | * | |
5 | * This file contains support for SPC-4 Extended-Copy offload with generic | |
6 | * TCM backends. | |
7 | * | |
8 | * Copyright (c) 2011-2013 Datera, Inc. All rights reserved. | |
9 | * | |
10 | * Author: | |
11 | * Nicholas A. Bellinger <[email protected]> | |
12 | * | |
cbf031f4 NB |
13 | ******************************************************************************/ |
14 | ||
cbf031f4 NB |
15 | #include <linux/slab.h> |
16 | #include <linux/spinlock.h> | |
17 | #include <linux/list.h> | |
18 | #include <linux/configfs.h> | |
8dcf07be | 19 | #include <linux/ratelimit.h> |
ba929992 | 20 | #include <scsi/scsi_proto.h> |
cbf031f4 NB |
21 | #include <asm/unaligned.h> |
22 | ||
23 | #include <target/target_core_base.h> | |
24 | #include <target/target_core_backend.h> | |
25 | #include <target/target_core_fabric.h> | |
cbf031f4 | 26 | |
b13876d2 | 27 | #include "target_core_internal.h" |
cbf031f4 NB |
28 | #include "target_core_pr.h" |
29 | #include "target_core_ua.h" | |
30 | #include "target_core_xcopy.h" | |
31 | ||
32 | static struct workqueue_struct *xcopy_wq = NULL; | |
cbf031f4 | 33 | |
d877d727 BVA |
34 | static sense_reason_t target_parse_xcopy_cmd(struct xcopy_op *xop); |
35 | ||
2896c938 DD |
36 | /** |
37 | * target_xcopy_locate_se_dev_e4_iter - compare XCOPY NAA device identifiers | |
38 | * | |
39 | * @se_dev: device being considered for match | |
40 | * @dev_wwn: XCOPY requested NAA dev_wwn | |
41 | * @return: 1 on match, 0 on no-match | |
42 | */ | |
6906d008 | 43 | static int target_xcopy_locate_se_dev_e4_iter(struct se_device *se_dev, |
2896c938 | 44 | const unsigned char *dev_wwn) |
cbf031f4 | 45 | { |
94aae4ca | 46 | unsigned char tmp_dev_wwn[XCOPY_NAA_IEEE_REGEX_LEN]; |
cbf031f4 NB |
47 | int rc; |
48 | ||
2896c938 DD |
49 | if (!se_dev->dev_attrib.emulate_3pc) { |
50 | pr_debug("XCOPY: emulate_3pc disabled on se_dev %p\n", se_dev); | |
6906d008 | 51 | return 0; |
2896c938 | 52 | } |
cbf031f4 | 53 | |
6906d008 | 54 | memset(&tmp_dev_wwn[0], 0, XCOPY_NAA_IEEE_REGEX_LEN); |
17f947b8 | 55 | spc_gen_naa_6h_vendor_specific(se_dev, &tmp_dev_wwn[0]); |
acb3f260 | 56 | |
2896c938 | 57 | rc = memcmp(&tmp_dev_wwn[0], dev_wwn, XCOPY_NAA_IEEE_REGEX_LEN); |
6906d008 | 58 | if (rc != 0) { |
2896c938 DD |
59 | pr_debug("XCOPY: skip non-matching: %*ph\n", |
60 | XCOPY_NAA_IEEE_REGEX_LEN, tmp_dev_wwn); | |
61 | return 0; | |
6906d008 | 62 | } |
2896c938 | 63 | pr_debug("XCOPY 0xe4: located se_dev: %p\n", se_dev); |
cbf031f4 | 64 | |
6906d008 MC |
65 | return 1; |
66 | } | |
cbf031f4 | 67 | |
2896c938 DD |
68 | static int target_xcopy_locate_se_dev_e4(struct se_session *sess, |
69 | const unsigned char *dev_wwn, | |
70 | struct se_device **_found_dev, | |
71 | struct percpu_ref **_found_lun_ref) | |
6906d008 | 72 | { |
2896c938 DD |
73 | struct se_dev_entry *deve; |
74 | struct se_node_acl *nacl; | |
75 | struct se_lun *this_lun = NULL; | |
76 | struct se_device *found_dev = NULL; | |
77 | ||
78 | /* cmd with NULL sess indicates no associated $FABRIC_MOD */ | |
79 | if (!sess) | |
80 | goto err_out; | |
81 | ||
82 | pr_debug("XCOPY 0xe4: searching for: %*ph\n", | |
83 | XCOPY_NAA_IEEE_REGEX_LEN, dev_wwn); | |
84 | ||
85 | nacl = sess->se_node_acl; | |
86 | rcu_read_lock(); | |
87 | hlist_for_each_entry_rcu(deve, &nacl->lun_entry_hlist, link) { | |
88 | struct se_device *this_dev; | |
89 | int rc; | |
90 | ||
91 | this_lun = rcu_dereference(deve->se_lun); | |
92 | this_dev = rcu_dereference_raw(this_lun->lun_se_dev); | |
93 | ||
94 | rc = target_xcopy_locate_se_dev_e4_iter(this_dev, dev_wwn); | |
95 | if (rc) { | |
96 | if (percpu_ref_tryget_live(&this_lun->lun_ref)) | |
97 | found_dev = this_dev; | |
98 | break; | |
99 | } | |
cbf031f4 | 100 | } |
2896c938 DD |
101 | rcu_read_unlock(); |
102 | if (found_dev == NULL) | |
103 | goto err_out; | |
104 | ||
105 | pr_debug("lun_ref held for se_dev: %p se_dev->se_dev_group: %p\n", | |
106 | found_dev, &found_dev->dev_group); | |
107 | *_found_dev = found_dev; | |
108 | *_found_lun_ref = &this_lun->lun_ref; | |
109 | return 0; | |
110 | err_out: | |
111 | pr_debug_ratelimited("Unable to locate 0xe4 descriptor for EXTENDED_COPY\n"); | |
112 | return -EINVAL; | |
cbf031f4 NB |
113 | } |
114 | ||
115 | static int target_xcopy_parse_tiddesc_e4(struct se_cmd *se_cmd, struct xcopy_op *xop, | |
66640d35 | 116 | unsigned char *p, unsigned short cscd_index) |
cbf031f4 NB |
117 | { |
118 | unsigned char *desc = p; | |
119 | unsigned short ript; | |
120 | u8 desig_len; | |
121 | /* | |
122 | * Extract RELATIVE INITIATOR PORT IDENTIFIER | |
123 | */ | |
124 | ript = get_unaligned_be16(&desc[2]); | |
125 | pr_debug("XCOPY 0xe4: RELATIVE INITIATOR PORT IDENTIFIER: %hu\n", ript); | |
126 | /* | |
127 | * Check for supported code set, association, and designator type | |
128 | */ | |
129 | if ((desc[4] & 0x0f) != 0x1) { | |
130 | pr_err("XCOPY 0xe4: code set of non binary type not supported\n"); | |
131 | return -EINVAL; | |
132 | } | |
133 | if ((desc[5] & 0x30) != 0x00) { | |
134 | pr_err("XCOPY 0xe4: association other than LUN not supported\n"); | |
135 | return -EINVAL; | |
136 | } | |
137 | if ((desc[5] & 0x0f) != 0x3) { | |
138 | pr_err("XCOPY 0xe4: designator type unsupported: 0x%02x\n", | |
139 | (desc[5] & 0x0f)); | |
140 | return -EINVAL; | |
141 | } | |
142 | /* | |
143 | * Check for matching 16 byte length for NAA IEEE Registered Extended | |
144 | * Assigned designator | |
145 | */ | |
146 | desig_len = desc[7]; | |
95b1b51e | 147 | if (desig_len != XCOPY_NAA_IEEE_REGEX_LEN) { |
cbf031f4 NB |
148 | pr_err("XCOPY 0xe4: invalid desig_len: %d\n", (int)desig_len); |
149 | return -EINVAL; | |
150 | } | |
151 | pr_debug("XCOPY 0xe4: desig_len: %d\n", (int)desig_len); | |
152 | /* | |
153 | * Check for NAA IEEE Registered Extended Assigned header.. | |
154 | */ | |
155 | if ((desc[8] & 0xf0) != 0x60) { | |
156 | pr_err("XCOPY 0xe4: Unsupported DESIGNATOR TYPE: 0x%02x\n", | |
157 | (desc[8] & 0xf0)); | |
158 | return -EINVAL; | |
159 | } | |
160 | ||
66640d35 DD |
161 | if (cscd_index != xop->stdi && cscd_index != xop->dtdi) { |
162 | pr_debug("XCOPY 0xe4: ignoring CSCD entry %d - neither src nor " | |
163 | "dest\n", cscd_index); | |
164 | return 0; | |
165 | } | |
166 | ||
167 | if (cscd_index == xop->stdi) { | |
cbf031f4 NB |
168 | memcpy(&xop->src_tid_wwn[0], &desc[8], XCOPY_NAA_IEEE_REGEX_LEN); |
169 | /* | |
170 | * Determine if the source designator matches the local device | |
171 | */ | |
172 | if (!memcmp(&xop->local_dev_wwn[0], &xop->src_tid_wwn[0], | |
173 | XCOPY_NAA_IEEE_REGEX_LEN)) { | |
174 | xop->op_origin = XCOL_SOURCE_RECV_OP; | |
175 | xop->src_dev = se_cmd->se_dev; | |
176 | pr_debug("XCOPY 0xe4: Set xop->src_dev %p from source" | |
177 | " received xop\n", xop->src_dev); | |
178 | } | |
66640d35 DD |
179 | } |
180 | ||
181 | if (cscd_index == xop->dtdi) { | |
cbf031f4 NB |
182 | memcpy(&xop->dst_tid_wwn[0], &desc[8], XCOPY_NAA_IEEE_REGEX_LEN); |
183 | /* | |
66640d35 DD |
184 | * Determine if the destination designator matches the local |
185 | * device. If @cscd_index corresponds to both source (stdi) and | |
186 | * destination (dtdi), or dtdi comes after stdi, then | |
187 | * XCOL_DEST_RECV_OP wins. | |
cbf031f4 NB |
188 | */ |
189 | if (!memcmp(&xop->local_dev_wwn[0], &xop->dst_tid_wwn[0], | |
190 | XCOPY_NAA_IEEE_REGEX_LEN)) { | |
191 | xop->op_origin = XCOL_DEST_RECV_OP; | |
192 | xop->dst_dev = se_cmd->se_dev; | |
193 | pr_debug("XCOPY 0xe4: Set xop->dst_dev: %p from destination" | |
194 | " received xop\n", xop->dst_dev); | |
195 | } | |
196 | } | |
197 | ||
198 | return 0; | |
199 | } | |
200 | ||
201 | static int target_xcopy_parse_target_descriptors(struct se_cmd *se_cmd, | |
202 | struct xcopy_op *xop, unsigned char *p, | |
449a1378 | 203 | unsigned short tdll, sense_reason_t *sense_ret) |
cbf031f4 NB |
204 | { |
205 | struct se_device *local_dev = se_cmd->se_dev; | |
206 | unsigned char *desc = p; | |
66640d35 DD |
207 | int offset = tdll % XCOPY_TARGET_DESC_LEN, rc; |
208 | unsigned short cscd_index = 0; | |
cbf031f4 | 209 | unsigned short start = 0; |
cbf031f4 | 210 | |
449a1378 NB |
211 | *sense_ret = TCM_INVALID_PARAMETER_LIST; |
212 | ||
cbf031f4 NB |
213 | if (offset != 0) { |
214 | pr_err("XCOPY target descriptor list length is not" | |
215 | " multiple of %d\n", XCOPY_TARGET_DESC_LEN); | |
c2438497 | 216 | *sense_ret = TCM_UNSUPPORTED_TARGET_DESC_TYPE_CODE; |
cbf031f4 NB |
217 | return -EINVAL; |
218 | } | |
61c35919 | 219 | if (tdll > RCR_OP_MAX_TARGET_DESC_COUNT * XCOPY_TARGET_DESC_LEN) { |
cbf031f4 NB |
220 | pr_err("XCOPY target descriptor supports a maximum" |
221 | " two src/dest descriptors, tdll: %hu too large..\n", tdll); | |
61c35919 DD |
222 | /* spc4r37 6.4.3.4 CSCD DESCRIPTOR LIST LENGTH field */ |
223 | *sense_ret = TCM_TOO_MANY_TARGET_DESCS; | |
cbf031f4 NB |
224 | return -EINVAL; |
225 | } | |
226 | /* | |
227 | * Generate an IEEE Registered Extended designator based upon the | |
228 | * se_device the XCOPY was received upon.. | |
229 | */ | |
230 | memset(&xop->local_dev_wwn[0], 0, XCOPY_NAA_IEEE_REGEX_LEN); | |
17f947b8 | 231 | spc_gen_naa_6h_vendor_specific(local_dev, &xop->local_dev_wwn[0]); |
cbf031f4 NB |
232 | |
233 | while (start < tdll) { | |
234 | /* | |
66640d35 DD |
235 | * Check target descriptor identification with 0xE4 type, and |
236 | * compare the current index with the CSCD descriptor IDs in | |
237 | * the segment descriptor. Use VPD 0x83 WWPN matching .. | |
cbf031f4 NB |
238 | */ |
239 | switch (desc[0]) { | |
240 | case 0xe4: | |
241 | rc = target_xcopy_parse_tiddesc_e4(se_cmd, xop, | |
66640d35 | 242 | &desc[0], cscd_index); |
cbf031f4 NB |
243 | if (rc != 0) |
244 | goto out; | |
cbf031f4 NB |
245 | start += XCOPY_TARGET_DESC_LEN; |
246 | desc += XCOPY_TARGET_DESC_LEN; | |
66640d35 | 247 | cscd_index++; |
cbf031f4 NB |
248 | break; |
249 | default: | |
250 | pr_err("XCOPY unsupported descriptor type code:" | |
251 | " 0x%02x\n", desc[0]); | |
c2438497 | 252 | *sense_ret = TCM_UNSUPPORTED_TARGET_DESC_TYPE_CODE; |
cbf031f4 NB |
253 | goto out; |
254 | } | |
255 | } | |
256 | ||
66640d35 DD |
257 | switch (xop->op_origin) { |
258 | case XCOL_SOURCE_RECV_OP: | |
2896c938 DD |
259 | rc = target_xcopy_locate_se_dev_e4(se_cmd->se_sess, |
260 | xop->dst_tid_wwn, | |
261 | &xop->dst_dev, | |
262 | &xop->remote_lun_ref); | |
66640d35 DD |
263 | break; |
264 | case XCOL_DEST_RECV_OP: | |
2896c938 DD |
265 | rc = target_xcopy_locate_se_dev_e4(se_cmd->se_sess, |
266 | xop->src_tid_wwn, | |
267 | &xop->src_dev, | |
268 | &xop->remote_lun_ref); | |
66640d35 DD |
269 | break; |
270 | default: | |
271 | pr_err("XCOPY CSCD descriptor IDs not found in CSCD list - " | |
272 | "stdi: %hu dtdi: %hu\n", xop->stdi, xop->dtdi); | |
273 | rc = -EINVAL; | |
274 | break; | |
275 | } | |
449a1378 NB |
276 | /* |
277 | * If a matching IEEE NAA 0x83 descriptor for the requested device | |
278 | * is not located on this node, return COPY_ABORTED with ASQ/ASQC | |
279 | * 0x0d/0x02 - COPY_TARGET_DEVICE_NOT_REACHABLE to request the | |
280 | * initiator to fall back to normal copy method. | |
281 | */ | |
282 | if (rc < 0) { | |
283 | *sense_ret = TCM_COPY_TARGET_DEVICE_NOT_REACHABLE; | |
cbf031f4 | 284 | goto out; |
449a1378 | 285 | } |
cbf031f4 NB |
286 | |
287 | pr_debug("XCOPY TGT desc: Source dev: %p NAA IEEE WWN: 0x%16phN\n", | |
288 | xop->src_dev, &xop->src_tid_wwn[0]); | |
289 | pr_debug("XCOPY TGT desc: Dest dev: %p NAA IEEE WWN: 0x%16phN\n", | |
290 | xop->dst_dev, &xop->dst_tid_wwn[0]); | |
291 | ||
66640d35 | 292 | return cscd_index; |
cbf031f4 NB |
293 | |
294 | out: | |
295 | return -EINVAL; | |
296 | } | |
297 | ||
7e642ca0 | 298 | static int target_xcopy_parse_segdesc_02(struct xcopy_op *xop, unsigned char *p) |
cbf031f4 NB |
299 | { |
300 | unsigned char *desc = p; | |
301 | int dc = (desc[1] & 0x02); | |
302 | unsigned short desc_len; | |
303 | ||
304 | desc_len = get_unaligned_be16(&desc[2]); | |
305 | if (desc_len != 0x18) { | |
306 | pr_err("XCOPY segment desc 0x02: Illegal desc_len:" | |
307 | " %hu\n", desc_len); | |
308 | return -EINVAL; | |
309 | } | |
310 | ||
311 | xop->stdi = get_unaligned_be16(&desc[4]); | |
312 | xop->dtdi = get_unaligned_be16(&desc[6]); | |
f184210b DD |
313 | |
314 | if (xop->stdi > XCOPY_CSCD_DESC_ID_LIST_OFF_MAX || | |
315 | xop->dtdi > XCOPY_CSCD_DESC_ID_LIST_OFF_MAX) { | |
316 | pr_err("XCOPY segment desc 0x02: unsupported CSCD ID > 0x%x; stdi: %hu dtdi: %hu\n", | |
317 | XCOPY_CSCD_DESC_ID_LIST_OFF_MAX, xop->stdi, xop->dtdi); | |
318 | return -EINVAL; | |
319 | } | |
320 | ||
cbf031f4 NB |
321 | pr_debug("XCOPY seg desc 0x02: desc_len: %hu stdi: %hu dtdi: %hu, DC: %d\n", |
322 | desc_len, xop->stdi, xop->dtdi, dc); | |
323 | ||
324 | xop->nolb = get_unaligned_be16(&desc[10]); | |
325 | xop->src_lba = get_unaligned_be64(&desc[12]); | |
326 | xop->dst_lba = get_unaligned_be64(&desc[20]); | |
327 | pr_debug("XCOPY seg desc 0x02: nolb: %hu src_lba: %llu dst_lba: %llu\n", | |
328 | xop->nolb, (unsigned long long)xop->src_lba, | |
329 | (unsigned long long)xop->dst_lba); | |
330 | ||
cbf031f4 NB |
331 | return 0; |
332 | } | |
333 | ||
7e642ca0 LF |
334 | static int target_xcopy_parse_segment_descriptors(struct xcopy_op *xop, |
335 | unsigned char *p, unsigned int sdll, | |
336 | sense_reason_t *sense_ret) | |
cbf031f4 NB |
337 | { |
338 | unsigned char *desc = p; | |
339 | unsigned int start = 0; | |
340 | int offset = sdll % XCOPY_SEGMENT_DESC_LEN, rc, ret = 0; | |
341 | ||
af9f62c1 DD |
342 | *sense_ret = TCM_INVALID_PARAMETER_LIST; |
343 | ||
cbf031f4 NB |
344 | if (offset != 0) { |
345 | pr_err("XCOPY segment descriptor list length is not" | |
346 | " multiple of %d\n", XCOPY_SEGMENT_DESC_LEN); | |
c2438497 | 347 | *sense_ret = TCM_UNSUPPORTED_SEGMENT_DESC_TYPE_CODE; |
cbf031f4 NB |
348 | return -EINVAL; |
349 | } | |
af9f62c1 DD |
350 | if (sdll > RCR_OP_MAX_SG_DESC_COUNT * XCOPY_SEGMENT_DESC_LEN) { |
351 | pr_err("XCOPY supports %u segment descriptor(s), sdll: %u too" | |
352 | " large..\n", RCR_OP_MAX_SG_DESC_COUNT, sdll); | |
353 | /* spc4r37 6.4.3.5 SEGMENT DESCRIPTOR LIST LENGTH field */ | |
354 | *sense_ret = TCM_TOO_MANY_SEGMENT_DESCS; | |
355 | return -EINVAL; | |
356 | } | |
cbf031f4 NB |
357 | |
358 | while (start < sdll) { | |
359 | /* | |
360 | * Check segment descriptor type code for block -> block | |
361 | */ | |
362 | switch (desc[0]) { | |
363 | case 0x02: | |
7e642ca0 | 364 | rc = target_xcopy_parse_segdesc_02(xop, desc); |
cbf031f4 NB |
365 | if (rc < 0) |
366 | goto out; | |
367 | ||
368 | ret++; | |
369 | start += XCOPY_SEGMENT_DESC_LEN; | |
370 | desc += XCOPY_SEGMENT_DESC_LEN; | |
371 | break; | |
372 | default: | |
6774def6 | 373 | pr_err("XCOPY unsupported segment descriptor" |
cbf031f4 | 374 | "type: 0x%02x\n", desc[0]); |
c2438497 | 375 | *sense_ret = TCM_UNSUPPORTED_SEGMENT_DESC_TYPE_CODE; |
cbf031f4 NB |
376 | goto out; |
377 | } | |
378 | } | |
379 | ||
380 | return ret; | |
381 | ||
382 | out: | |
383 | return -EINVAL; | |
384 | } | |
385 | ||
386 | /* | |
387 | * Start xcopy_pt ops | |
388 | */ | |
389 | ||
390 | struct xcopy_pt_cmd { | |
cbf031f4 | 391 | struct se_cmd se_cmd; |
cbf031f4 | 392 | struct completion xpt_passthrough_sem; |
366bda19 | 393 | unsigned char sense_buffer[TRANSPORT_SENSE_BUFFER]; |
cbf031f4 NB |
394 | }; |
395 | ||
adf653f9 | 396 | struct se_portal_group xcopy_pt_tpg; |
cbf031f4 NB |
397 | static struct se_session xcopy_pt_sess; |
398 | static struct se_node_acl xcopy_pt_nacl; | |
399 | ||
cbf031f4 NB |
400 | static int xcopy_pt_get_cmd_state(struct se_cmd *se_cmd) |
401 | { | |
402 | return 0; | |
403 | } | |
404 | ||
405 | static void xcopy_pt_undepend_remotedev(struct xcopy_op *xop) | |
406 | { | |
cbf031f4 | 407 | if (xop->op_origin == XCOL_SOURCE_RECV_OP) |
2896c938 | 408 | pr_debug("putting dst lun_ref for %p\n", xop->dst_dev); |
cbf031f4 | 409 | else |
2896c938 | 410 | pr_debug("putting src lun_ref for %p\n", xop->src_dev); |
cbf031f4 | 411 | |
2896c938 | 412 | percpu_ref_put(xop->remote_lun_ref); |
cbf031f4 NB |
413 | } |
414 | ||
415 | static void xcopy_pt_release_cmd(struct se_cmd *se_cmd) | |
416 | { | |
417 | struct xcopy_pt_cmd *xpt_cmd = container_of(se_cmd, | |
418 | struct xcopy_pt_cmd, se_cmd); | |
419 | ||
b92fcfcb DD |
420 | /* xpt_cmd is on the stack, nothing to free here */ |
421 | pr_debug("xpt_cmd done: %p\n", xpt_cmd); | |
cbf031f4 NB |
422 | } |
423 | ||
424 | static int xcopy_pt_check_stop_free(struct se_cmd *se_cmd) | |
425 | { | |
426 | struct xcopy_pt_cmd *xpt_cmd = container_of(se_cmd, | |
427 | struct xcopy_pt_cmd, se_cmd); | |
428 | ||
429 | complete(&xpt_cmd->xpt_passthrough_sem); | |
430 | return 0; | |
431 | } | |
432 | ||
433 | static int xcopy_pt_write_pending(struct se_cmd *se_cmd) | |
434 | { | |
435 | return 0; | |
436 | } | |
437 | ||
cbf031f4 NB |
438 | static int xcopy_pt_queue_data_in(struct se_cmd *se_cmd) |
439 | { | |
440 | return 0; | |
441 | } | |
442 | ||
443 | static int xcopy_pt_queue_status(struct se_cmd *se_cmd) | |
444 | { | |
445 | return 0; | |
446 | } | |
447 | ||
9ac8928e | 448 | static const struct target_core_fabric_ops xcopy_pt_tfo = { |
30c7ca93 | 449 | .fabric_name = "xcopy-pt", |
cbf031f4 NB |
450 | .get_cmd_state = xcopy_pt_get_cmd_state, |
451 | .release_cmd = xcopy_pt_release_cmd, | |
452 | .check_stop_free = xcopy_pt_check_stop_free, | |
453 | .write_pending = xcopy_pt_write_pending, | |
cbf031f4 NB |
454 | .queue_data_in = xcopy_pt_queue_data_in, |
455 | .queue_status = xcopy_pt_queue_status, | |
456 | }; | |
457 | ||
458 | /* | |
459 | * End xcopy_pt_ops | |
460 | */ | |
461 | ||
462 | int target_xcopy_setup_pt(void) | |
463 | { | |
ad669505 BVA |
464 | int ret; |
465 | ||
cbf031f4 NB |
466 | xcopy_wq = alloc_workqueue("xcopy_wq", WQ_MEM_RECLAIM, 0); |
467 | if (!xcopy_wq) { | |
468 | pr_err("Unable to allocate xcopy_wq\n"); | |
469 | return -ENOMEM; | |
470 | } | |
471 | ||
cbf031f4 | 472 | memset(&xcopy_pt_tpg, 0, sizeof(struct se_portal_group)); |
cbf031f4 NB |
473 | INIT_LIST_HEAD(&xcopy_pt_tpg.acl_node_list); |
474 | INIT_LIST_HEAD(&xcopy_pt_tpg.tpg_sess_list); | |
475 | ||
cbf031f4 NB |
476 | xcopy_pt_tpg.se_tpg_tfo = &xcopy_pt_tfo; |
477 | ||
478 | memset(&xcopy_pt_nacl, 0, sizeof(struct se_node_acl)); | |
479 | INIT_LIST_HEAD(&xcopy_pt_nacl.acl_list); | |
480 | INIT_LIST_HEAD(&xcopy_pt_nacl.acl_sess_list); | |
481 | memset(&xcopy_pt_sess, 0, sizeof(struct se_session)); | |
ad669505 BVA |
482 | ret = transport_init_session(&xcopy_pt_sess); |
483 | if (ret < 0) | |
3c006c7d | 484 | goto destroy_wq; |
cbf031f4 NB |
485 | |
486 | xcopy_pt_nacl.se_tpg = &xcopy_pt_tpg; | |
487 | xcopy_pt_nacl.nacl_sess = &xcopy_pt_sess; | |
488 | ||
489 | xcopy_pt_sess.se_tpg = &xcopy_pt_tpg; | |
490 | xcopy_pt_sess.se_node_acl = &xcopy_pt_nacl; | |
491 | ||
492 | return 0; | |
3c006c7d MC |
493 | |
494 | destroy_wq: | |
495 | destroy_workqueue(xcopy_wq); | |
496 | xcopy_wq = NULL; | |
497 | return ret; | |
cbf031f4 NB |
498 | } |
499 | ||
500 | void target_xcopy_release_pt(void) | |
501 | { | |
3c006c7d | 502 | if (xcopy_wq) { |
cbf031f4 | 503 | destroy_workqueue(xcopy_wq); |
3c006c7d MC |
504 | transport_uninit_session(&xcopy_pt_sess); |
505 | } | |
cbf031f4 NB |
506 | } |
507 | ||
be71530a BVA |
508 | /* |
509 | * target_xcopy_setup_pt_cmd - set up a pass-through command | |
510 | * @xpt_cmd: Data structure to initialize. | |
511 | * @xop: Describes the XCOPY operation received from an initiator. | |
512 | * @se_dev: Backend device to associate with @xpt_cmd if | |
513 | * @remote_port == true. | |
514 | * @cdb: SCSI CDB to be copied into @xpt_cmd. | |
515 | * @remote_port: If false, use the LUN through which the XCOPY command has | |
516 | * been received. If true, use @se_dev->xcopy_lun. | |
be71530a BVA |
517 | * |
518 | * Set up a SCSI command (READ or WRITE) that will be used to execute an | |
519 | * XCOPY command. | |
520 | */ | |
cbf031f4 NB |
521 | static int target_xcopy_setup_pt_cmd( |
522 | struct xcopy_pt_cmd *xpt_cmd, | |
523 | struct xcopy_op *xop, | |
524 | struct se_device *se_dev, | |
525 | unsigned char *cdb, | |
0ad08996 | 526 | bool remote_port) |
cbf031f4 NB |
527 | { |
528 | struct se_cmd *cmd = &xpt_cmd->se_cmd; | |
be71530a | 529 | |
cbf031f4 NB |
530 | /* |
531 | * Setup LUN+port to honor reservations based upon xop->op_origin for | |
532 | * X-COPY PUSH or X-COPY PULL based upon where the CDB was received. | |
533 | */ | |
be71530a BVA |
534 | if (remote_port) { |
535 | cmd->se_lun = &se_dev->xcopy_lun; | |
536 | cmd->se_dev = se_dev; | |
537 | } else { | |
538 | cmd->se_lun = xop->xop_se_cmd->se_lun; | |
539 | cmd->se_dev = xop->xop_se_cmd->se_dev; | |
540 | } | |
541 | cmd->se_cmd_flags |= SCF_SE_LUN_CMD; | |
cbf031f4 | 542 | |
08694199 | 543 | if (target_cmd_init_cdb(cmd, cdb, GFP_KERNEL)) |
9e95fb80 SP |
544 | return -EINVAL; |
545 | ||
649ee054 | 546 | cmd->tag = 0; |
987db587 | 547 | if (target_cmd_parse_cdb(cmd)) |
0ad08996 | 548 | return -EINVAL; |
cbf031f4 | 549 | |
0ad08996 DD |
550 | if (transport_generic_map_mem_to_cmd(cmd, xop->xop_data_sg, |
551 | xop->xop_data_nents, NULL, 0)) | |
552 | return -EINVAL; | |
cbf031f4 | 553 | |
0ad08996 DD |
554 | pr_debug("Setup PASSTHROUGH_NOALLOC t_data_sg: %p t_data_nents:" |
555 | " %u\n", cmd->t_data_sg, cmd->t_data_nents); | |
cbf031f4 NB |
556 | |
557 | return 0; | |
cbf031f4 NB |
558 | } |
559 | ||
560 | static int target_xcopy_issue_pt_cmd(struct xcopy_pt_cmd *xpt_cmd) | |
561 | { | |
562 | struct se_cmd *se_cmd = &xpt_cmd->se_cmd; | |
563 | sense_reason_t sense_rc; | |
564 | ||
565 | sense_rc = transport_generic_new_cmd(se_cmd); | |
566 | if (sense_rc) | |
567 | return -EINVAL; | |
568 | ||
569 | if (se_cmd->data_direction == DMA_TO_DEVICE) | |
570 | target_execute_cmd(se_cmd); | |
571 | ||
572 | wait_for_completion_interruptible(&xpt_cmd->xpt_passthrough_sem); | |
573 | ||
574 | pr_debug("target_xcopy_issue_pt_cmd(): SCSI status: 0x%02x\n", | |
575 | se_cmd->scsi_status); | |
8a955d6d NB |
576 | |
577 | return (se_cmd->scsi_status) ? -EINVAL : 0; | |
cbf031f4 NB |
578 | } |
579 | ||
580 | static int target_xcopy_read_source( | |
581 | struct se_cmd *ec_cmd, | |
582 | struct xcopy_op *xop, | |
583 | struct se_device *src_dev, | |
584 | sector_t src_lba, | |
585 | u32 src_sectors) | |
586 | { | |
b92fcfcb DD |
587 | struct xcopy_pt_cmd xpt_cmd; |
588 | struct se_cmd *se_cmd = &xpt_cmd.se_cmd; | |
cbf031f4 NB |
589 | u32 length = (src_sectors * src_dev->dev_attrib.block_size); |
590 | int rc; | |
591 | unsigned char cdb[16]; | |
592 | bool remote_port = (xop->op_origin == XCOL_DEST_RECV_OP); | |
593 | ||
b92fcfcb DD |
594 | memset(&xpt_cmd, 0, sizeof(xpt_cmd)); |
595 | init_completion(&xpt_cmd.xpt_passthrough_sem); | |
cbf031f4 NB |
596 | |
597 | memset(&cdb[0], 0, 16); | |
598 | cdb[0] = READ_16; | |
599 | put_unaligned_be64(src_lba, &cdb[2]); | |
600 | put_unaligned_be32(src_sectors, &cdb[10]); | |
601 | pr_debug("XCOPY: Built READ_16: LBA: %llu Sectors: %u Length: %u\n", | |
602 | (unsigned long long)src_lba, src_sectors, length); | |
603 | ||
a78b7136 MC |
604 | __target_init_cmd(se_cmd, &xcopy_pt_tfo, &xcopy_pt_sess, length, |
605 | DMA_FROM_DEVICE, 0, &xpt_cmd.sense_buffer[0], 0); | |
cbf031f4 | 606 | |
b92fcfcb | 607 | rc = target_xcopy_setup_pt_cmd(&xpt_cmd, xop, src_dev, &cdb[0], |
0ad08996 | 608 | remote_port); |
cbf031f4 | 609 | if (rc < 0) { |
b92fcfcb DD |
610 | ec_cmd->scsi_status = se_cmd->scsi_status; |
611 | goto out; | |
cbf031f4 NB |
612 | } |
613 | ||
cbf031f4 NB |
614 | pr_debug("XCOPY-READ: Saved xop->xop_data_sg: %p, num: %u for READ" |
615 | " memory\n", xop->xop_data_sg, xop->xop_data_nents); | |
616 | ||
b92fcfcb DD |
617 | rc = target_xcopy_issue_pt_cmd(&xpt_cmd); |
618 | if (rc < 0) | |
619 | ec_cmd->scsi_status = se_cmd->scsi_status; | |
620 | out: | |
621 | transport_generic_free_cmd(se_cmd, 0); | |
622 | return rc; | |
cbf031f4 NB |
623 | } |
624 | ||
625 | static int target_xcopy_write_destination( | |
626 | struct se_cmd *ec_cmd, | |
627 | struct xcopy_op *xop, | |
628 | struct se_device *dst_dev, | |
629 | sector_t dst_lba, | |
630 | u32 dst_sectors) | |
631 | { | |
b92fcfcb DD |
632 | struct xcopy_pt_cmd xpt_cmd; |
633 | struct se_cmd *se_cmd = &xpt_cmd.se_cmd; | |
cbf031f4 NB |
634 | u32 length = (dst_sectors * dst_dev->dev_attrib.block_size); |
635 | int rc; | |
636 | unsigned char cdb[16]; | |
637 | bool remote_port = (xop->op_origin == XCOL_SOURCE_RECV_OP); | |
638 | ||
b92fcfcb DD |
639 | memset(&xpt_cmd, 0, sizeof(xpt_cmd)); |
640 | init_completion(&xpt_cmd.xpt_passthrough_sem); | |
cbf031f4 NB |
641 | |
642 | memset(&cdb[0], 0, 16); | |
643 | cdb[0] = WRITE_16; | |
644 | put_unaligned_be64(dst_lba, &cdb[2]); | |
645 | put_unaligned_be32(dst_sectors, &cdb[10]); | |
646 | pr_debug("XCOPY: Built WRITE_16: LBA: %llu Sectors: %u Length: %u\n", | |
647 | (unsigned long long)dst_lba, dst_sectors, length); | |
648 | ||
a78b7136 MC |
649 | __target_init_cmd(se_cmd, &xcopy_pt_tfo, &xcopy_pt_sess, length, |
650 | DMA_TO_DEVICE, 0, &xpt_cmd.sense_buffer[0], 0); | |
cbf031f4 | 651 | |
b92fcfcb | 652 | rc = target_xcopy_setup_pt_cmd(&xpt_cmd, xop, dst_dev, &cdb[0], |
0ad08996 | 653 | remote_port); |
cbf031f4 | 654 | if (rc < 0) { |
b92fcfcb DD |
655 | ec_cmd->scsi_status = se_cmd->scsi_status; |
656 | goto out; | |
cbf031f4 NB |
657 | } |
658 | ||
b92fcfcb DD |
659 | rc = target_xcopy_issue_pt_cmd(&xpt_cmd); |
660 | if (rc < 0) | |
661 | ec_cmd->scsi_status = se_cmd->scsi_status; | |
662 | out: | |
663 | transport_generic_free_cmd(se_cmd, 0); | |
664 | return rc; | |
cbf031f4 NB |
665 | } |
666 | ||
667 | static void target_xcopy_do_work(struct work_struct *work) | |
668 | { | |
669 | struct xcopy_op *xop = container_of(work, struct xcopy_op, xop_work); | |
cbf031f4 | 670 | struct se_cmd *ec_cmd = xop->xop_se_cmd; |
d877d727 BVA |
671 | struct se_device *src_dev, *dst_dev; |
672 | sector_t src_lba, dst_lba, end_lba; | |
cbf031f4 | 673 | unsigned int max_sectors; |
d877d727 | 674 | int rc = 0; |
0ad08996 | 675 | unsigned short nolb, max_nolb, copied_nolb = 0; |
0394b504 | 676 | sense_reason_t sense_rc; |
d877d727 | 677 | |
0394b504 SS |
678 | sense_rc = target_parse_xcopy_cmd(xop); |
679 | if (sense_rc != TCM_NO_SENSE) | |
d877d727 | 680 | goto err_free; |
cbf031f4 | 681 | |
0394b504 SS |
682 | if (WARN_ON_ONCE(!xop->src_dev) || WARN_ON_ONCE(!xop->dst_dev)) { |
683 | sense_rc = TCM_INVALID_PARAMETER_LIST; | |
d877d727 | 684 | goto err_free; |
0394b504 | 685 | } |
d877d727 BVA |
686 | |
687 | src_dev = xop->src_dev; | |
688 | dst_dev = xop->dst_dev; | |
689 | src_lba = xop->src_lba; | |
690 | dst_lba = xop->dst_lba; | |
691 | nolb = xop->nolb; | |
cbf031f4 NB |
692 | end_lba = src_lba + nolb; |
693 | /* | |
694 | * Break up XCOPY I/O into hw_max_sectors sized I/O based on the | |
695 | * smallest max_sectors between src_dev + dev_dev, or | |
696 | */ | |
697 | max_sectors = min(src_dev->dev_attrib.hw_max_sectors, | |
698 | dst_dev->dev_attrib.hw_max_sectors); | |
699 | max_sectors = min_t(u32, max_sectors, XCOPY_MAX_SECTORS); | |
700 | ||
701 | max_nolb = min_t(u16, max_sectors, ((u16)(~0U))); | |
702 | ||
703 | pr_debug("target_xcopy_do_work: nolb: %hu, max_nolb: %hu end_lba: %llu\n", | |
704 | nolb, max_nolb, (unsigned long long)end_lba); | |
705 | pr_debug("target_xcopy_do_work: Starting src_lba: %llu, dst_lba: %llu\n", | |
706 | (unsigned long long)src_lba, (unsigned long long)dst_lba); | |
707 | ||
708 | while (src_lba < end_lba) { | |
0ad08996 DD |
709 | unsigned short cur_nolb = min(nolb, max_nolb); |
710 | u32 cur_bytes = cur_nolb * src_dev->dev_attrib.block_size; | |
711 | ||
712 | if (cur_bytes != xop->xop_data_bytes) { | |
713 | /* | |
714 | * (Re)allocate a buffer large enough to hold the XCOPY | |
715 | * I/O size, which can be reused each read / write loop. | |
716 | */ | |
717 | target_free_sgl(xop->xop_data_sg, xop->xop_data_nents); | |
718 | rc = target_alloc_sgl(&xop->xop_data_sg, | |
719 | &xop->xop_data_nents, | |
720 | cur_bytes, | |
721 | false, false); | |
722 | if (rc < 0) | |
723 | goto out; | |
724 | xop->xop_data_bytes = cur_bytes; | |
725 | } | |
cbf031f4 NB |
726 | |
727 | pr_debug("target_xcopy_do_work: Calling read src_dev: %p src_lba: %llu," | |
728 | " cur_nolb: %hu\n", src_dev, (unsigned long long)src_lba, cur_nolb); | |
729 | ||
730 | rc = target_xcopy_read_source(ec_cmd, xop, src_dev, src_lba, cur_nolb); | |
731 | if (rc < 0) | |
732 | goto out; | |
733 | ||
734 | src_lba += cur_nolb; | |
735 | pr_debug("target_xcopy_do_work: Incremented READ src_lba to %llu\n", | |
736 | (unsigned long long)src_lba); | |
737 | ||
738 | pr_debug("target_xcopy_do_work: Calling write dst_dev: %p dst_lba: %llu," | |
739 | " cur_nolb: %hu\n", dst_dev, (unsigned long long)dst_lba, cur_nolb); | |
740 | ||
741 | rc = target_xcopy_write_destination(ec_cmd, xop, dst_dev, | |
742 | dst_lba, cur_nolb); | |
b92fcfcb | 743 | if (rc < 0) |
cbf031f4 | 744 | goto out; |
cbf031f4 NB |
745 | |
746 | dst_lba += cur_nolb; | |
747 | pr_debug("target_xcopy_do_work: Incremented WRITE dst_lba to %llu\n", | |
748 | (unsigned long long)dst_lba); | |
749 | ||
750 | copied_nolb += cur_nolb; | |
751 | nolb -= cur_nolb; | |
cbf031f4 NB |
752 | } |
753 | ||
754 | xcopy_pt_undepend_remotedev(xop); | |
0ad08996 | 755 | target_free_sgl(xop->xop_data_sg, xop->xop_data_nents); |
cbf031f4 NB |
756 | kfree(xop); |
757 | ||
758 | pr_debug("target_xcopy_do_work: Final src_lba: %llu, dst_lba: %llu\n", | |
759 | (unsigned long long)src_lba, (unsigned long long)dst_lba); | |
760 | pr_debug("target_xcopy_do_work: Blocks copied: %hu, Bytes Copied: %u\n", | |
761 | copied_nolb, copied_nolb * dst_dev->dev_attrib.block_size); | |
762 | ||
763 | pr_debug("target_xcopy_do_work: Setting X-COPY GOOD status -> sending response\n"); | |
764 | target_complete_cmd(ec_cmd, SAM_STAT_GOOD); | |
765 | return; | |
766 | ||
767 | out: | |
0394b504 SS |
768 | /* |
769 | * The XCOPY command was aborted after some data was transferred. | |
770 | * Terminate command with CHECK CONDITION status, with the sense key | |
771 | * set to COPY ABORTED. | |
772 | */ | |
773 | sense_rc = TCM_COPY_TARGET_DEVICE_NOT_REACHABLE; | |
cbf031f4 | 774 | xcopy_pt_undepend_remotedev(xop); |
0ad08996 | 775 | target_free_sgl(xop->xop_data_sg, xop->xop_data_nents); |
d877d727 BVA |
776 | |
777 | err_free: | |
cbf031f4 | 778 | kfree(xop); |
0394b504 SS |
779 | pr_warn_ratelimited("target_xcopy_do_work: rc: %d, sense: %u, XCOPY operation failed\n", |
780 | rc, sense_rc); | |
781 | target_complete_cmd_with_sense(ec_cmd, SAM_STAT_CHECK_CONDITION, sense_rc); | |
cbf031f4 NB |
782 | } |
783 | ||
d877d727 BVA |
784 | /* |
785 | * Returns TCM_NO_SENSE upon success or a sense code != TCM_NO_SENSE if parsing | |
786 | * fails. | |
787 | */ | |
788 | static sense_reason_t target_parse_xcopy_cmd(struct xcopy_op *xop) | |
cbf031f4 | 789 | { |
d877d727 | 790 | struct se_cmd *se_cmd = xop->xop_se_cmd; |
cbf031f4 | 791 | unsigned char *p = NULL, *seg_desc; |
d877d727 | 792 | unsigned int list_id, list_id_usage, sdll, inline_dl; |
48502ddb | 793 | sense_reason_t ret = TCM_INVALID_PARAMETER_LIST; |
cbf031f4 NB |
794 | int rc; |
795 | unsigned short tdll; | |
796 | ||
cbf031f4 NB |
797 | p = transport_kmap_data_sg(se_cmd); |
798 | if (!p) { | |
799 | pr_err("transport_kmap_data_sg() failed in target_do_xcopy\n"); | |
800 | return TCM_OUT_OF_RESOURCES; | |
801 | } | |
802 | ||
803 | list_id = p[0]; | |
3f7a46c6 NB |
804 | list_id_usage = (p[1] & 0x18) >> 3; |
805 | ||
cbf031f4 NB |
806 | /* |
807 | * Determine TARGET DESCRIPTOR LIST LENGTH + SEGMENT DESCRIPTOR LIST LENGTH | |
808 | */ | |
809 | tdll = get_unaligned_be16(&p[2]); | |
810 | sdll = get_unaligned_be32(&p[8]); | |
7d387066 DD |
811 | if (tdll + sdll > RCR_OP_MAX_DESC_LIST_LEN) { |
812 | pr_err("XCOPY descriptor list length %u exceeds maximum %u\n", | |
813 | tdll + sdll, RCR_OP_MAX_DESC_LIST_LEN); | |
814 | ret = TCM_PARAMETER_LIST_LENGTH_ERROR; | |
815 | goto out; | |
816 | } | |
cbf031f4 NB |
817 | |
818 | inline_dl = get_unaligned_be32(&p[12]); | |
819 | if (inline_dl != 0) { | |
820 | pr_err("XCOPY with non zero inline data length\n"); | |
821 | goto out; | |
822 | } | |
823 | ||
f94fd098 DD |
824 | if (se_cmd->data_length < (XCOPY_HDR_LEN + tdll + sdll + inline_dl)) { |
825 | pr_err("XCOPY parameter truncation: data length %u too small " | |
826 | "for tdll: %hu sdll: %u inline_dl: %u\n", | |
827 | se_cmd->data_length, tdll, sdll, inline_dl); | |
828 | ret = TCM_PARAMETER_LIST_LENGTH_ERROR; | |
829 | goto out; | |
830 | } | |
831 | ||
cbf031f4 NB |
832 | pr_debug("Processing XCOPY with list_id: 0x%02x list_id_usage: 0x%02x" |
833 | " tdll: %hu sdll: %u inline_dl: %u\n", list_id, list_id_usage, | |
834 | tdll, sdll, inline_dl); | |
835 | ||
66640d35 DD |
836 | /* |
837 | * skip over the target descriptors until segment descriptors | |
838 | * have been passed - CSCD ids are needed to determine src and dest. | |
839 | */ | |
840 | seg_desc = &p[16] + tdll; | |
841 | ||
7e642ca0 | 842 | rc = target_xcopy_parse_segment_descriptors(xop, seg_desc, sdll, &ret); |
66640d35 DD |
843 | if (rc <= 0) |
844 | goto out; | |
845 | ||
846 | pr_debug("XCOPY: Processed %d segment descriptors, length: %u\n", rc, | |
847 | rc * XCOPY_SEGMENT_DESC_LEN); | |
848 | ||
449a1378 | 849 | rc = target_xcopy_parse_target_descriptors(se_cmd, xop, &p[16], tdll, &ret); |
cbf031f4 NB |
850 | if (rc <= 0) |
851 | goto out; | |
852 | ||
48502ddb NB |
853 | if (xop->src_dev->dev_attrib.block_size != |
854 | xop->dst_dev->dev_attrib.block_size) { | |
855 | pr_err("XCOPY: Non matching src_dev block_size: %u + dst_dev" | |
856 | " block_size: %u currently unsupported\n", | |
857 | xop->src_dev->dev_attrib.block_size, | |
858 | xop->dst_dev->dev_attrib.block_size); | |
859 | xcopy_pt_undepend_remotedev(xop); | |
860 | ret = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; | |
861 | goto out; | |
862 | } | |
863 | ||
cbf031f4 NB |
864 | pr_debug("XCOPY: Processed %d target descriptors, length: %u\n", rc, |
865 | rc * XCOPY_TARGET_DESC_LEN); | |
cbf031f4 | 866 | transport_kunmap_data_sg(se_cmd); |
cbf031f4 NB |
867 | return TCM_NO_SENSE; |
868 | ||
869 | out: | |
870 | if (p) | |
871 | transport_kunmap_data_sg(se_cmd); | |
48502ddb | 872 | return ret; |
cbf031f4 NB |
873 | } |
874 | ||
d877d727 BVA |
875 | sense_reason_t target_do_xcopy(struct se_cmd *se_cmd) |
876 | { | |
877 | struct se_device *dev = se_cmd->se_dev; | |
878 | struct xcopy_op *xop; | |
879 | unsigned int sa; | |
880 | ||
881 | if (!dev->dev_attrib.emulate_3pc) { | |
882 | pr_err("EXTENDED_COPY operation explicitly disabled\n"); | |
883 | return TCM_UNSUPPORTED_SCSI_OPCODE; | |
884 | } | |
885 | ||
886 | sa = se_cmd->t_task_cdb[1] & 0x1f; | |
887 | if (sa != 0x00) { | |
888 | pr_err("EXTENDED_COPY(LID4) not supported\n"); | |
889 | return TCM_UNSUPPORTED_SCSI_OPCODE; | |
890 | } | |
891 | ||
892 | if (se_cmd->data_length == 0) { | |
893 | target_complete_cmd(se_cmd, SAM_STAT_GOOD); | |
894 | return TCM_NO_SENSE; | |
895 | } | |
896 | if (se_cmd->data_length < XCOPY_HDR_LEN) { | |
897 | pr_err("XCOPY parameter truncation: length %u < hdr_len %u\n", | |
898 | se_cmd->data_length, XCOPY_HDR_LEN); | |
899 | return TCM_PARAMETER_LIST_LENGTH_ERROR; | |
900 | } | |
901 | ||
902 | xop = kzalloc(sizeof(struct xcopy_op), GFP_KERNEL); | |
903 | if (!xop) | |
904 | goto err; | |
905 | xop->xop_se_cmd = se_cmd; | |
906 | INIT_WORK(&xop->xop_work, target_xcopy_do_work); | |
907 | if (WARN_ON_ONCE(!queue_work(xcopy_wq, &xop->xop_work))) | |
908 | goto free; | |
909 | return TCM_NO_SENSE; | |
910 | ||
911 | free: | |
912 | kfree(xop); | |
913 | ||
914 | err: | |
915 | return TCM_OUT_OF_RESOURCES; | |
916 | } | |
917 | ||
cbf031f4 NB |
918 | static sense_reason_t target_rcr_operating_parameters(struct se_cmd *se_cmd) |
919 | { | |
920 | unsigned char *p; | |
921 | ||
922 | p = transport_kmap_data_sg(se_cmd); | |
923 | if (!p) { | |
924 | pr_err("transport_kmap_data_sg failed in" | |
925 | " target_rcr_operating_parameters\n"); | |
926 | return TCM_OUT_OF_RESOURCES; | |
927 | } | |
928 | ||
929 | if (se_cmd->data_length < 54) { | |
930 | pr_err("Receive Copy Results Op Parameters length" | |
931 | " too small: %u\n", se_cmd->data_length); | |
932 | transport_kunmap_data_sg(se_cmd); | |
933 | return TCM_INVALID_CDB_FIELD; | |
934 | } | |
935 | /* | |
936 | * Set SNLID=1 (Supports no List ID) | |
937 | */ | |
938 | p[4] = 0x1; | |
939 | /* | |
940 | * MAXIMUM TARGET DESCRIPTOR COUNT | |
941 | */ | |
942 | put_unaligned_be16(RCR_OP_MAX_TARGET_DESC_COUNT, &p[8]); | |
943 | /* | |
944 | * MAXIMUM SEGMENT DESCRIPTOR COUNT | |
945 | */ | |
946 | put_unaligned_be16(RCR_OP_MAX_SG_DESC_COUNT, &p[10]); | |
947 | /* | |
948 | * MAXIMUM DESCRIPTOR LIST LENGTH | |
949 | */ | |
950 | put_unaligned_be32(RCR_OP_MAX_DESC_LIST_LEN, &p[12]); | |
951 | /* | |
952 | * MAXIMUM SEGMENT LENGTH | |
953 | */ | |
954 | put_unaligned_be32(RCR_OP_MAX_SEGMENT_LEN, &p[16]); | |
955 | /* | |
956 | * MAXIMUM INLINE DATA LENGTH for SA 0x04 (NOT SUPPORTED) | |
957 | */ | |
958 | put_unaligned_be32(0x0, &p[20]); | |
959 | /* | |
960 | * HELD DATA LIMIT | |
961 | */ | |
962 | put_unaligned_be32(0x0, &p[24]); | |
963 | /* | |
964 | * MAXIMUM STREAM DEVICE TRANSFER SIZE | |
965 | */ | |
966 | put_unaligned_be32(0x0, &p[28]); | |
967 | /* | |
968 | * TOTAL CONCURRENT COPIES | |
969 | */ | |
970 | put_unaligned_be16(RCR_OP_TOTAL_CONCURR_COPIES, &p[34]); | |
971 | /* | |
972 | * MAXIMUM CONCURRENT COPIES | |
973 | */ | |
974 | p[36] = RCR_OP_MAX_CONCURR_COPIES; | |
975 | /* | |
976 | * DATA SEGMENT GRANULARITY (log 2) | |
977 | */ | |
978 | p[37] = RCR_OP_DATA_SEG_GRAN_LOG2; | |
979 | /* | |
980 | * INLINE DATA GRANULARITY log 2) | |
981 | */ | |
982 | p[38] = RCR_OP_INLINE_DATA_GRAN_LOG2; | |
983 | /* | |
984 | * HELD DATA GRANULARITY | |
985 | */ | |
986 | p[39] = RCR_OP_HELD_DATA_GRAN_LOG2; | |
987 | /* | |
988 | * IMPLEMENTED DESCRIPTOR LIST LENGTH | |
989 | */ | |
990 | p[43] = 0x2; | |
991 | /* | |
992 | * List of implemented descriptor type codes (ordered) | |
993 | */ | |
994 | p[44] = 0x02; /* Copy Block to Block device */ | |
995 | p[45] = 0xe4; /* Identification descriptor target descriptor */ | |
996 | ||
997 | /* | |
998 | * AVAILABLE DATA (n-3) | |
999 | */ | |
1000 | put_unaligned_be32(42, &p[0]); | |
1001 | ||
1002 | transport_kunmap_data_sg(se_cmd); | |
14b40c1e | 1003 | target_complete_cmd(se_cmd, SAM_STAT_GOOD); |
cbf031f4 NB |
1004 | |
1005 | return TCM_NO_SENSE; | |
1006 | } | |
1007 | ||
1008 | sense_reason_t target_do_receive_copy_results(struct se_cmd *se_cmd) | |
1009 | { | |
1010 | unsigned char *cdb = &se_cmd->t_task_cdb[0]; | |
1011 | int sa = (cdb[1] & 0x1f), list_id = cdb[2]; | |
1012 | sense_reason_t rc = TCM_NO_SENSE; | |
1013 | ||
1014 | pr_debug("Entering target_do_receive_copy_results: SA: 0x%02x, List ID:" | |
1015 | " 0x%02x, AL: %u\n", sa, list_id, se_cmd->data_length); | |
1016 | ||
1017 | if (list_id != 0) { | |
1018 | pr_err("Receive Copy Results with non zero list identifier" | |
1019 | " not supported\n"); | |
1020 | return TCM_INVALID_CDB_FIELD; | |
1021 | } | |
1022 | ||
1023 | switch (sa) { | |
1024 | case RCR_SA_OPERATING_PARAMETERS: | |
1025 | rc = target_rcr_operating_parameters(se_cmd); | |
1026 | break; | |
1027 | case RCR_SA_COPY_STATUS: | |
1028 | case RCR_SA_RECEIVE_DATA: | |
1029 | case RCR_SA_FAILED_SEGMENT_DETAILS: | |
1030 | default: | |
1031 | pr_err("Unsupported SA for receive copy results: 0x%02x\n", sa); | |
1032 | return TCM_INVALID_CDB_FIELD; | |
1033 | } | |
1034 | ||
1035 | return rc; | |
1036 | } |