[linux.git] / arch / mips / kernel / idle.c

/*
 * MIPS idle loop and WAIT instruction support.
 *
 * Copyright (C) xxxx  the Anonymous
 * Copyright (C) 1994 - 2006 Ralf Baechle
 * Copyright (C) 2003, 2004  Maciej W. Rozycki
 * Copyright (C) 2001, 2004, 2011, 2012	 MIPS Technologies, Inc.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version
 * 2 of the License, or (at your option) any later version.
 */
#include <linux/export.h>
#include <linux/init.h>
#include <linux/irqflags.h>
#include <linux/printk.h>
#include <linux/sched.h>
#include <asm/cpu.h>
#include <asm/cpu-info.h>
#include <asm/idle.h>
#include <asm/mipsregs.h>

/*
 * Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
 * the implementation of the "wait" feature differs between CPU families. This
 * points to the function that implements CPU specific wait.
 * The wait instruction stops the pipeline and reduces the power consumption of
 * the CPU very much.
 */
void (*cpu_wait)(void);
EXPORT_SYMBOL(cpu_wait);

static void r3081_wait(void)
{
	unsigned long cfg = read_c0_conf();
	write_c0_conf(cfg | R30XX_CONF_HALT);
	local_irq_enable();
}

static void r39xx_wait(void)
{
	if (!need_resched())
		write_c0_conf(read_c0_conf() | TX39_CONF_HALT);
	local_irq_enable();
}

void r4k_wait(void)
{
	local_irq_enable();
	__r4k_wait();
}

/*
 * This variant is preferable as it allows testing need_resched and going to
 * sleep depending on the outcome atomically.  Unfortunately the "It is
 * implementation-dependent whether the pipeline restarts when a non-enabled
 * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
 * using this version a gamble.
 */
void r4k_wait_irqoff(void)
{
	if (!need_resched())
		__asm__(
		"	.set	push		\n"
		"	.set	mips3		\n"
		"	wait			\n"
		"	.set	pop		\n");
	local_irq_enable();
	__asm__(
	"	.globl __pastwait	\n"
	"__pastwait:			\n");
}

/*
 * The RM7000 variant has to handle erratum 38.	 The workaround is to not
 * have any pending stores when the WAIT instruction is executed.
 */
static void rm7k_wait_irqoff(void)
{
	if (!need_resched())
		__asm__(
		"	.set	push					\n"
		"	.set	mips3					\n"
		"	.set	noat					\n"
		"	mfc0	$1, $12					\n"
		"	sync						\n"
		"	mtc0	$1, $12		# stalls until W stage	\n"
		"	wait						\n"
		"	mtc0	$1, $12		# stalls until W stage	\n"
		"	.set	pop					\n");
	local_irq_enable();
}

/*
 * Au1 'wait' is only useful when the 32kHz counter is used as timer,
 * since coreclock (and the cp0 counter) stops upon executing it. Only an
 * interrupt can wake it, so they must be enabled before entering idle modes.
 */
static void au1k_wait(void)
{
	unsigned long c0status = read_c0_status() | 1;	/* irqs on */

	__asm__(
	"	.set	mips3			\n"
	"	cache	0x14, 0(%0)		\n"
	"	cache	0x14, 32(%0)		\n"
	"	sync				\n"
	"	mtc0	%1, $12			\n" /* wr c0status */
	"	wait				\n"
	"	nop				\n"
	"	nop				\n"
	"	nop				\n"
	"	nop				\n"
	"	.set	mips0			\n"
	: : "r" (au1k_wait), "r" (c0status));
}

static int __initdata nowait;

static int __init wait_disable(char *s)
{
	nowait = 1;

	return 1;
}

__setup("nowait", wait_disable);

void __init check_wait(void)
{
	struct cpuinfo_mips *c = &current_cpu_data;

	if (nowait) {
		printk("Wait instruction disabled.\n");
		return;
	}

	switch (c->cputype) {
	case CPU_R3081:
	case CPU_R3081E:
		cpu_wait = r3081_wait;
		break;
	case CPU_TX3927:
		cpu_wait = r39xx_wait;
		break;
	case CPU_R4200:
/*	case CPU_R4300: */
	case CPU_R4600:
	case CPU_R4640:
	case CPU_R4650:
	case CPU_R4700:
	case CPU_R5000:
	case CPU_R5500:
	case CPU_NEVADA:
	case CPU_4KC:
	case CPU_4KEC:
	case CPU_4KSC:
	case CPU_5KC:
	case CPU_25KF:
	case CPU_PR4450:
	case CPU_BMIPS3300:
	case CPU_BMIPS4350:
	case CPU_BMIPS4380:
	case CPU_BMIPS5000:
	case CPU_CAVIUM_OCTEON:
	case CPU_CAVIUM_OCTEON_PLUS:
	case CPU_CAVIUM_OCTEON2:
	case CPU_JZRISC:
	case CPU_LOONGSON1:
	case CPU_XLR:
	case CPU_XLP:
		cpu_wait = r4k_wait;
		break;

	case CPU_RM7000:
		cpu_wait = rm7k_wait_irqoff;
		break;

	case CPU_M14KC:
	case CPU_M14KEC:
	case CPU_24K:
	case CPU_34K:
	case CPU_1004K:
		cpu_wait = r4k_wait;
		if (read_c0_config7() & MIPS_CONF7_WII)
			cpu_wait = r4k_wait_irqoff;
		break;

	case CPU_74K:
		cpu_wait = r4k_wait;
		if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
			cpu_wait = r4k_wait_irqoff;
		break;

	case CPU_TX49XX:
		cpu_wait = r4k_wait_irqoff;
		break;
	case CPU_ALCHEMY:
		cpu_wait = au1k_wait;
		break;
	case CPU_20KC:
		/*
		 * WAIT on Rev1.0 has E1, E2, E3 and E16.
		 * WAIT on Rev2.0 and Rev3.0 has E16.
		 * Rev3.1 WAIT is nop, why bother
		 */
		if ((c->processor_id & 0xff) <= 0x64)
			break;

		/*
		 * Another rev is incremeting c0_count at a reduced clock
		 * rate while in WAIT mode.  So we basically have the choice
		 * between using the cp0 timer as clocksource or avoiding
		 * the WAIT instruction.  Until more details are known,
		 * disable the use of WAIT for 20Kc entirely.
		   cpu_wait = r4k_wait;
		 */
		break;
	case CPU_RM9000:
		if ((c->processor_id & 0x00ff) >= 0x40)
			cpu_wait = r4k_wait;
		break;
	default:
		break;
	}
}

static void smtc_idle_hook(void)
{
#ifdef CONFIG_MIPS_MT_SMTC
	void smtc_idle_loop_hook(void);

	smtc_idle_loop_hook();
#endif
}

void arch_cpu_idle(void)
{
	smtc_idle_hook();
	if (cpu_wait)
		cpu_wait();
	else
		local_irq_enable();
}
Commit	Line	Data
49f2ec91 RB	1	/*
	2	* MIPS idle loop and WAIT instruction support.
	3	*
	4	* Copyright (C) xxxx the Anonymous
	5	* Copyright (C) 1994 - 2006 Ralf Baechle
	6	* Copyright (C) 2003, 2004 Maciej W. Rozycki
	7	* Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc.
	8	*
	9	* This program is free software; you can redistribute it and/or
	10	* modify it under the terms of the GNU General Public License
	11	* as published by the Free Software Foundation; either version
	12	* 2 of the License, or (at your option) any later version.
	13	*/
	14	#include <linux/export.h>
	15	#include <linux/init.h>
	16	#include <linux/irqflags.h>
	17	#include <linux/printk.h>
	18	#include <linux/sched.h>
	19	#include <asm/cpu.h>
	20	#include <asm/cpu-info.h>
bdc92d74	21	#include <asm/idle.h>
49f2ec91 RB	22	#include <asm/mipsregs.h>
	23
	24	/*
	25	* Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
	26	* the implementation of the "wait" feature differs between CPU families. This
	27	* points to the function that implements CPU specific wait.
	28	* The wait instruction stops the pipeline and reduces the power consumption of
	29	* the CPU very much.
	30	*/
	31	void (*cpu_wait)(void);
	32	EXPORT_SYMBOL(cpu_wait);
	33
	34	static void r3081_wait(void)
	35	{
	36	unsigned long cfg = read_c0_conf();
	37	write_c0_conf(cfg \| R30XX_CONF_HALT);
fb40bc3e	38	local_irq_enable();
49f2ec91 RB	39	}
	40
	41	static void r39xx_wait(void)
	42	{
49f2ec91 RB	43	if (!need_resched())
	44	write_c0_conf(read_c0_conf() \| TX39_CONF_HALT);
	45	local_irq_enable();
	46	}
	47
087d990b RB	48	void r4k_wait(void)
	49	{
	50	local_irq_enable();
	51	__r4k_wait();
	52	}
	53
49f2ec91 RB	54	/*
	55	* This variant is preferable as it allows testing need_resched and going to
	56	* sleep depending on the outcome atomically. Unfortunately the "It is
	57	* implementation-dependent whether the pipeline restarts when a non-enabled
	58	* interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
	59	* using this version a gamble.
	60	*/
	61	void r4k_wait_irqoff(void)
	62	{
49f2ec91	63	if (!need_resched())
f91a148a RB	64	__asm__(
	65	" .set push \n"
	66	" .set mips3 \n"
	67	" wait \n"
	68	" .set pop \n");
49f2ec91	69	local_irq_enable();
f91a148a RB	70	__asm__(
	71	" .globl __pastwait \n"
	72	"__pastwait: \n");
49f2ec91 RB	73	}
	74
	75	/*
	76	* The RM7000 variant has to handle erratum 38. The workaround is to not
	77	* have any pending stores when the WAIT instruction is executed.
	78	*/
	79	static void rm7k_wait_irqoff(void)
	80	{
49f2ec91 RB	81	if (!need_resched())
	82	__asm__(
	83	" .set push \n"
	84	" .set mips3 \n"
	85	" .set noat \n"
	86	" mfc0 $1, $12 \n"
	87	" sync \n"
	88	" mtc0 $1, $12 # stalls until W stage \n"
	89	" wait \n"
	90	" mtc0 $1, $12 # stalls until W stage \n"
	91	" .set pop \n");
	92	local_irq_enable();
	93	}
	94
	95	/*
e63a24dd ML	96	* Au1 'wait' is only useful when the 32kHz counter is used as timer,
	97	* since coreclock (and the cp0 counter) stops upon executing it. Only an
	98	* interrupt can wake it, so they must be enabled before entering idle modes.
49f2ec91 RB	99	*/
	100	static void au1k_wait(void)
	101	{
e63a24dd ML	102	unsigned long c0status = read_c0_status() \| 1; /* irqs on */
e63a24dd ML	103
f91a148a RB	104	__asm__(
	105	" .set mips3 \n"
	106	" cache 0x14, 0(%0) \n"
	107	" cache 0x14, 32(%0) \n"
	108	" sync \n"
e63a24dd	109	" mtc0 %1, $12 \n" /* wr c0status */
f91a148a RB	110	" wait \n"
	111	" nop \n"
	112	" nop \n"
	113	" nop \n"
	114	" nop \n"
	115	" .set mips0 \n"
e63a24dd	116	: : "r" (au1k_wait), "r" (c0status));
49f2ec91 RB	117	}
	118
	119	static int __initdata nowait;
	120
	121	static int __init wait_disable(char *s)
	122	{
	123	nowait = 1;
	124
	125	return 1;
	126	}
	127
	128	__setup("nowait", wait_disable);
	129
	130	void __init check_wait(void)
	131	{
	132	struct cpuinfo_mips *c = &current_cpu_data;
	133
	134	if (nowait) {
	135	printk("Wait instruction disabled.\n");
	136	return;
	137	}
	138
	139	switch (c->cputype) {
	140	case CPU_R3081:
	141	case CPU_R3081E:
	142	cpu_wait = r3081_wait;
	143	break;
	144	case CPU_TX3927:
	145	cpu_wait = r39xx_wait;
	146	break;
	147	case CPU_R4200:
	148	/* case CPU_R4300: */
	149	case CPU_R4600:
	150	case CPU_R4640:
	151	case CPU_R4650:
	152	case CPU_R4700:
	153	case CPU_R5000:
	154	case CPU_R5500:
	155	case CPU_NEVADA:
	156	case CPU_4KC:
	157	case CPU_4KEC:
	158	case CPU_4KSC:
	159	case CPU_5KC:
	160	case CPU_25KF:
	161	case CPU_PR4450:
	162	case CPU_BMIPS3300:
	163	case CPU_BMIPS4350:
	164	case CPU_BMIPS4380:
	165	case CPU_BMIPS5000:
	166	case CPU_CAVIUM_OCTEON:
	167	case CPU_CAVIUM_OCTEON_PLUS:
	168	case CPU_CAVIUM_OCTEON2:
	169	case CPU_JZRISC:
	170	case CPU_LOONGSON1:
	171	case CPU_XLR:
	172	case CPU_XLP:
	173	cpu_wait = r4k_wait;
	174	break;
	175
	176	case CPU_RM7000:
	177	cpu_wait = rm7k_wait_irqoff;
	178	break;
	179
	180	case CPU_M14KC:
181	case CPU_M14KEC:
182	case CPU_24K:
183	case CPU_34K:
184	case CPU_1004K:
185	cpu_wait = r4k_wait;
186	if (read_c0_config7() & MIPS_CONF7_WII)
187	cpu_wait = r4k_wait_irqoff;
188	break;
189
190	case CPU_74K:
191	cpu_wait = r4k_wait;
192	if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
193	cpu_wait = r4k_wait_irqoff;
194	break;
195
196	case CPU_TX49XX:
197	cpu_wait = r4k_wait_irqoff;
198	break;
199	case CPU_ALCHEMY:
200	cpu_wait = au1k_wait;
201	break;
202	case CPU_20KC:
203	/*
204	* WAIT on Rev1.0 has E1, E2, E3 and E16.
205	* WAIT on Rev2.0 and Rev3.0 has E16.
206	* Rev3.1 WAIT is nop, why bother
207	*/
208	if ((c->processor_id & 0xff) <= 0x64)
209	break;
210
211	/*
212	* Another rev is incremeting c0_count at a reduced clock
213	* rate while in WAIT mode. So we basically have the choice
214	* between using the cp0 timer as clocksource or avoiding
215	* the WAIT instruction. Until more details are known,
216	* disable the use of WAIT for 20Kc entirely.
217	cpu_wait = r4k_wait;
218	*/
219	break;
220	case CPU_RM9000:
221	if ((c->processor_id & 0x00ff) >= 0x40)
222	cpu_wait = r4k_wait;
223	break;
224	default:
225	break;
226	}
227	}
228
00baf857	229	static void smtc_idle_hook(void)
49f2ec91 RB	230	{
49f2ec91 RB	231	#ifdef CONFIG_MIPS_MT_SMTC
00baf857	232	void smtc_idle_loop_hook(void);
49f2ec91 RB	233
	234	smtc_idle_loop_hook();
	235	#endif
00baf857 RB	236	}
	237
	238	void arch_cpu_idle(void)
	239	{
	240	smtc_idle_hook();
49f2ec91	241	if (cpu_wait)
c9b6869d	242	cpu_wait();
49f2ec91 RB	243	else
	244	local_irq_enable();
	245	}