[linux.git] / arch / mips / kernel / Makefile

#
# Makefile for the Linux/MIPS kernel.
#

extra-y		:= head.o vmlinux.lds

obj-y		+= cpu-probe.o branch.o entry.o genex.o idle.o irq.o process.o \
		   prom.o ptrace.o reset.o setup.o signal.o syscall.o \
		   time.o topology.o traps.o unaligned.o watch.o vdso.o

ifdef CONFIG_FUNCTION_TRACER
CFLAGS_REMOVE_ftrace.o = -pg
CFLAGS_REMOVE_early_printk.o = -pg
CFLAGS_REMOVE_perf_event.o = -pg
CFLAGS_REMOVE_perf_event_mipsxx.o = -pg
endif

obj-$(CONFIG_CEVT_BCM1480)	+= cevt-bcm1480.o
obj-$(CONFIG_CEVT_R4K)		+= cevt-r4k.o
obj-$(CONFIG_MIPS_MT_SMTC)	+= cevt-smtc.o
obj-$(CONFIG_CEVT_DS1287)	+= cevt-ds1287.o
obj-$(CONFIG_CEVT_GIC)		+= cevt-gic.o
obj-$(CONFIG_CEVT_GT641XX)	+= cevt-gt641xx.o
obj-$(CONFIG_CEVT_SB1250)	+= cevt-sb1250.o
obj-$(CONFIG_CEVT_TXX9)		+= cevt-txx9.o
obj-$(CONFIG_CSRC_BCM1480)	+= csrc-bcm1480.o
obj-$(CONFIG_CSRC_GIC)		+= csrc-gic.o
obj-$(CONFIG_CSRC_IOASIC)	+= csrc-ioasic.o
obj-$(CONFIG_CSRC_POWERTV)	+= csrc-powertv.o
obj-$(CONFIG_CSRC_R4K)		+= csrc-r4k.o
obj-$(CONFIG_CSRC_SB1250)	+= csrc-sb1250.o
obj-$(CONFIG_SYNC_R4K)		+= sync-r4k.o

obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
obj-$(CONFIG_MODULES)		+= mips_ksyms.o module.o
obj-$(CONFIG_MODULES_USE_ELF_RELA) += module-rela.o

obj-$(CONFIG_FUNCTION_TRACER)	+= mcount.o ftrace.o

obj-$(CONFIG_CPU_R4K_FPU)	+= r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R3000)		+= r2300_fpu.o r2300_switch.o
obj-$(CONFIG_CPU_R6000)		+= r6000_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_TX39XX)	+= r2300_fpu.o r2300_switch.o
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += octeon_switch.o

obj-$(CONFIG_SMP)		+= smp.o
obj-$(CONFIG_SMP_UP)		+= smp-up.o
obj-$(CONFIG_CPU_BMIPS)		+= smp-bmips.o bmips_vec.o

obj-$(CONFIG_MIPS_MT)		+= mips-mt.o
obj-$(CONFIG_MIPS_MT_FPAFF)	+= mips-mt-fpaff.o
obj-$(CONFIG_MIPS_MT_SMTC)	+= smtc.o smtc-asm.o smtc-proc.o
obj-$(CONFIG_MIPS_MT_SMP)	+= smp-mt.o
obj-$(CONFIG_MIPS_CMP)		+= smp-cmp.o
obj-$(CONFIG_CPU_MIPSR2)	+= spram.o

obj-$(CONFIG_MIPS_VPE_LOADER)	+= vpe.o
obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o

obj-$(CONFIG_I8259)		+= i8259.o
obj-$(CONFIG_IRQ_CPU)		+= irq_cpu.o
obj-$(CONFIG_IRQ_CPU_RM7K)	+= irq-rm7000.o
obj-$(CONFIG_MIPS_MSC)		+= irq-msc01.o
obj-$(CONFIG_IRQ_TXX9)		+= irq_txx9.o
obj-$(CONFIG_IRQ_GT641XX)	+= irq-gt641xx.o
obj-$(CONFIG_IRQ_GIC)		+= irq-gic.o

obj-$(CONFIG_KPROBES)		+= kprobes.o
obj-$(CONFIG_32BIT)		+= scall32-o32.o
obj-$(CONFIG_64BIT)		+= scall64-64.o
obj-$(CONFIG_MIPS32_COMPAT)	+= linux32.o ptrace32.o signal32.o
obj-$(CONFIG_MIPS32_N32)	+= binfmt_elfn32.o scall64-n32.o signal_n32.o
obj-$(CONFIG_MIPS32_O32)	+= binfmt_elfo32.o scall64-o32.o

obj-$(CONFIG_KGDB)		+= kgdb.o
obj-$(CONFIG_PROC_FS)		+= proc.o

obj-$(CONFIG_64BIT)		+= cpu-bugs64.o

obj-$(CONFIG_I8253)		+= i8253.o

obj-$(CONFIG_GPIO_TXX9)		+= gpio_txx9.o

obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o crash.o
obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
obj-$(CONFIG_SPINLOCK_TEST)	+= spinlock_test.o
obj-$(CONFIG_MIPS_MACHINE)	+= mips_machine.o

CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -x c /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)

obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT)	+= 8250-platform.o

obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o
obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event_mipsxx.o

obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o

#
# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is not
# safe to unconditionnaly use the assembler -mdsp / -mdspr2 switches
# here because the compiler may use DSP ASE instructions (such as lwx) in
# code paths where we cannot check that the CPU we are running on supports it.
# Proper abstraction using HAVE_AS_DSP and macros is done in
# arch/mips/include/asm/mipsregs.h.
#
ifeq ($(CONFIG_CPU_MIPSR2), y)
CFLAGS_DSP 			= -DHAVE_AS_DSP

CFLAGS_signal.o			= $(CFLAGS_DSP)
CFLAGS_signal32.o		= $(CFLAGS_DSP)
CFLAGS_process.o		= $(CFLAGS_DSP)
CFLAGS_branch.o			= $(CFLAGS_DSP)
CFLAGS_ptrace.o			= $(CFLAGS_DSP)
endif

CPPFLAGS_vmlinux.lds		:= $(KBUILD_CFLAGS)
Commit	Line	Data
1da177e4 LT	1	#
	2	# Makefile for the Linux/MIPS kernel.
	3	#
	4
957b369c	5	extra-y := head.o vmlinux.lds
1da177e4	6
49f2ec91	7	obj-y += cpu-probe.o branch.o entry.o genex.o idle.o irq.o process.o \
9169a5d0	8	prom.o ptrace.o reset.o setup.o signal.o syscall.o \
c52d0d30	9	time.o topology.o traps.o unaligned.o watch.o vdso.o
1da177e4	10
d2bb0762	11	ifdef CONFIG_FUNCTION_TRACER
538f1952	12	CFLAGS_REMOVE_ftrace.o = -pg
d2bb0762	13	CFLAGS_REMOVE_early_printk.o = -pg
e5dcb58a DD	14	CFLAGS_REMOVE_perf_event.o = -pg
e5dcb58a DD	15	CFLAGS_REMOVE_perf_event_mipsxx.o = -pg
d2bb0762 WZ	16	endif
d2bb0762 WZ	17
217dd11e	18	obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o
f772cdb2	19	obj-$(CONFIG_CEVT_R4K) += cevt-r4k.o
8531a35e	20	obj-$(CONFIG_MIPS_MT_SMTC) += cevt-smtc.o
6457d9fc	21	obj-$(CONFIG_CEVT_DS1287) += cevt-ds1287.o
0ab2b7d0	22	obj-$(CONFIG_CEVT_GIC) += cevt-gic.o
1097c6ac	23	obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o
217dd11e	24	obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o
229f773e	25	obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o
217dd11e	26	obj-$(CONFIG_CSRC_BCM1480) += csrc-bcm1480.o
dfa762e1	27	obj-$(CONFIG_CSRC_GIC) += csrc-gic.o
4247417d	28	obj-$(CONFIG_CSRC_IOASIC) += csrc-ioasic.o
a3a0f8c8	29	obj-$(CONFIG_CSRC_POWERTV) += csrc-powertv.o
d7ea335c	30	obj-$(CONFIG_CSRC_R4K) += csrc-r4k.o
217dd11e	31	obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o
39b8d525	32	obj-$(CONFIG_SYNC_R4K) += sync-r4k.o
42f77542	33
1df0f0ff	34	obj-$(CONFIG_STACKTRACE) += stacktrace.o
4e6a05fe	35	obj-$(CONFIG_MODULES) += mips_ksyms.o module.o
786d35d4	36	obj-$(CONFIG_MODULES_USE_ELF_RELA) += module-rela.o
1da177e4	37
538f1952	38	obj-$(CONFIG_FUNCTION_TRACER) += mcount.o ftrace.o
d2bb0762	39
91405eb6	40	obj-$(CONFIG_CPU_R4K_FPU) += r4k_fpu.o r4k_switch.o
1da177e4	41	obj-$(CONFIG_CPU_R3000) += r2300_fpu.o r2300_switch.o
2a21c730	42	obj-$(CONFIG_CPU_R6000) += r6000_fpu.o r4k_switch.o
2a21c730	43	obj-$(CONFIG_CPU_TX39XX) += r2300_fpu.o r2300_switch.o
70342287	44	obj-$(CONFIG_CPU_CAVIUM_OCTEON) += octeon_switch.o
1da177e4 LT	45
1da177e4 LT	46	obj-$(CONFIG_SMP) += smp.o
940f6b48	47	obj-$(CONFIG_SMP_UP) += smp-up.o
df0ac8a4	48	obj-$(CONFIG_CPU_BMIPS) += smp-bmips.o bmips_vec.o
1da177e4	49
41c594ab	50	obj-$(CONFIG_MIPS_MT) += mips-mt.o
295cbf6d	51	obj-$(CONFIG_MIPS_MT_FPAFF) += mips-mt-fpaff.o
41c594ab RB	52	obj-$(CONFIG_MIPS_MT_SMTC) += smtc.o smtc-asm.o smtc-proc.o
41c594ab RB	53	obj-$(CONFIG_MIPS_MT_SMP) += smp-mt.o
39b8d525	54	obj-$(CONFIG_MIPS_CMP) += smp-cmp.o
0b6d497f	55	obj-$(CONFIG_CPU_MIPSR2) += spram.o
340ee4b9	56
e01402b1	57	obj-$(CONFIG_MIPS_VPE_LOADER) += vpe.o
70342287	58	obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o
e01402b1	59
1da177e4 LT	60	obj-$(CONFIG_I8259) += i8259.o
	61	obj-$(CONFIG_IRQ_CPU) += irq_cpu.o
	62	obj-$(CONFIG_IRQ_CPU_RM7K) += irq-rm7000.o
d5deda6f	63	obj-$(CONFIG_MIPS_MSC) += irq-msc01.o
8420fd00	64	obj-$(CONFIG_IRQ_TXX9) += irq_txx9.o
d5ab1a69	65	obj-$(CONFIG_IRQ_GT641XX) += irq-gt641xx.o
39b8d525	66	obj-$(CONFIG_IRQ_GIC) += irq-gic.o
1da177e4	67
c1bf207d	68	obj-$(CONFIG_KPROBES) += kprobes.o
875d43e7 RB	69	obj-$(CONFIG_32BIT) += scall32-o32.o
875d43e7 RB	70	obj-$(CONFIG_64BIT) += scall64-64.o
38201fb2	71	obj-$(CONFIG_MIPS32_COMPAT) += linux32.o ptrace32.o signal32.o
1da177e4	72	obj-$(CONFIG_MIPS32_N32) += binfmt_elfn32.o scall64-n32.o signal_n32.o
38201fb2	73	obj-$(CONFIG_MIPS32_O32) += binfmt_elfo32.o scall64-o32.o
1da177e4	74
88547001	75	obj-$(CONFIG_KGDB) += kgdb.o
1da177e4 LT	76	obj-$(CONFIG_PROC_FS) += proc.o
1da177e4 LT	77
875d43e7	78	obj-$(CONFIG_64BIT) += cpu-bugs64.o
1da177e4	79
d865bea4	80	obj-$(CONFIG_I8253) += i8253.o
e5c6c8e4	81
a9aec7fe AN	82	obj-$(CONFIG_GPIO_TXX9) += gpio_txx9.o
a9aec7fe AN	83
7aa1c8f4 RB	84	obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o
7aa1c8f4 RB	85	obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
36a88530	86	obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
bba90760	87	obj-$(CONFIG_SPINLOCK_TEST) += spinlock_test.o
487d70d0	88	obj-$(CONFIG_MIPS_MACHINE) += mips_machine.o
583bb86f	89
b1e0d8b7	90	CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -x c /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
e7c4782f RB	91
e7c4782f RB	92	obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT) += 8250-platform.o
dde96ca8	93
e5dcb58a DD	94	obj-$(CONFIG_PERF_EVENTS) += perf_event.o
e5dcb58a DD	95	obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_mipsxx.o
14f70012	96
94bb0c1a DD	97	obj-$(CONFIG_JUMP_LABEL) += jump_label.o
94bb0c1a DD	98
32a7ede6	99	#
63c2b681 FF	100	# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is not
	101	# safe to unconditionnaly use the assembler -mdsp / -mdspr2 switches
	102	# here because the compiler may use DSP ASE instructions (such as lwx) in
	103	# code paths where we cannot check that the CPU we are running on supports it.
	104	# Proper abstraction using HAVE_AS_DSP and macros is done in
	105	# arch/mips/include/asm/mipsregs.h.
32a7ede6 SH	106	#
	107	ifeq ($(CONFIG_CPU_MIPSR2), y)
	108	CFLAGS_DSP = -DHAVE_AS_DSP
	109
32a7ede6 SH	110	CFLAGS_signal.o = $(CFLAGS_DSP)
	111	CFLAGS_signal32.o = $(CFLAGS_DSP)
	112	CFLAGS_process.o = $(CFLAGS_DSP)
	113	CFLAGS_branch.o = $(CFLAGS_DSP)
	114	CFLAGS_ptrace.o = $(CFLAGS_DSP)
	115	endif
	116
cf72e947	117	CPPFLAGS_vmlinux.lds := $(KBUILD_CFLAGS)