[linux.git] / drivers / md / Makefile

#
# Makefile for the kernel software RAID and LVM drivers.
#

dm-mod-objs	:= dm.o dm-table.o dm-target.o dm-linear.o dm-stripe.o \
		   dm-ioctl.o dm-io.o kcopyd.o
dm-multipath-objs := dm-hw-handler.o dm-path-selector.o dm-mpath.o
dm-snapshot-objs := dm-snap.o dm-exception-store.o
dm-mirror-objs	:= dm-log.o dm-raid1.o
md-mod-objs     := md.o bitmap.o
raid456-objs	:= raid5.o raid6algos.o raid6recov.o raid6tables.o \
		   raid6int1.o raid6int2.o raid6int4.o \
		   raid6int8.o raid6int16.o raid6int32.o \
		   raid6altivec1.o raid6altivec2.o raid6altivec4.o \
		   raid6altivec8.o \
		   raid6mmx.o raid6sse1.o raid6sse2.o
hostprogs-y	:= mktables

# Note: link order is important.  All raid personalities
# and xor.o must come before md.o, as they each initialise 
# themselves, and md.o may use the personalities when it 
# auto-initialised.

obj-$(CONFIG_MD_LINEAR)		+= linear.o
obj-$(CONFIG_MD_RAID0)		+= raid0.o
obj-$(CONFIG_MD_RAID1)		+= raid1.o
obj-$(CONFIG_MD_RAID10)		+= raid10.o
obj-$(CONFIG_MD_RAID456)	+= raid456.o xor.o
obj-$(CONFIG_MD_MULTIPATH)	+= multipath.o
obj-$(CONFIG_MD_FAULTY)		+= faulty.o
obj-$(CONFIG_BLK_DEV_MD)	+= md-mod.o
obj-$(CONFIG_BLK_DEV_DM)	+= dm-mod.o
obj-$(CONFIG_DM_CRYPT)		+= dm-crypt.o
obj-$(CONFIG_DM_DELAY)		+= dm-delay.o
obj-$(CONFIG_DM_MULTIPATH)	+= dm-multipath.o dm-round-robin.o
obj-$(CONFIG_DM_MULTIPATH_EMC)	+= dm-emc.o
obj-$(CONFIG_DM_SNAPSHOT)	+= dm-snapshot.o
obj-$(CONFIG_DM_MIRROR)		+= dm-mirror.o
obj-$(CONFIG_DM_ZERO)		+= dm-zero.o

quiet_cmd_unroll = UNROLL  $@
      cmd_unroll = $(PERL) $(srctree)/$(src)/unroll.pl $(UNROLL) \
                   < $< > $@ || ( rm -f $@ && exit 1 )

ifeq ($(CONFIG_ALTIVEC),y)
altivec_flags := -maltivec -mabi=altivec
endif

targets += raid6int1.c
$(obj)/raid6int1.c:   UNROLL := 1
$(obj)/raid6int1.c:   $(src)/raid6int.uc $(src)/unroll.pl FORCE
	$(call if_changed,unroll)

targets += raid6int2.c
$(obj)/raid6int2.c:   UNROLL := 2
$(obj)/raid6int2.c:   $(src)/raid6int.uc $(src)/unroll.pl FORCE
	$(call if_changed,unroll)

targets += raid6int4.c
$(obj)/raid6int4.c:   UNROLL := 4
$(obj)/raid6int4.c:   $(src)/raid6int.uc $(src)/unroll.pl FORCE
	$(call if_changed,unroll)

targets += raid6int8.c
$(obj)/raid6int8.c:   UNROLL := 8
$(obj)/raid6int8.c:   $(src)/raid6int.uc $(src)/unroll.pl FORCE
	$(call if_changed,unroll)

targets += raid6int16.c
$(obj)/raid6int16.c:  UNROLL := 16
$(obj)/raid6int16.c:  $(src)/raid6int.uc $(src)/unroll.pl FORCE
	$(call if_changed,unroll)

targets += raid6int32.c
$(obj)/raid6int32.c:  UNROLL := 32
$(obj)/raid6int32.c:  $(src)/raid6int.uc $(src)/unroll.pl FORCE
	$(call if_changed,unroll)

CFLAGS_raid6altivec1.o += $(altivec_flags)
targets += raid6altivec1.c
$(obj)/raid6altivec1.c:   UNROLL := 1
$(obj)/raid6altivec1.c:   $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
	$(call if_changed,unroll)

CFLAGS_raid6altivec2.o += $(altivec_flags)
targets += raid6altivec2.c
$(obj)/raid6altivec2.c:   UNROLL := 2
$(obj)/raid6altivec2.c:   $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
	$(call if_changed,unroll)

CFLAGS_raid6altivec4.o += $(altivec_flags)
targets += raid6altivec4.c
$(obj)/raid6altivec4.c:   UNROLL := 4
$(obj)/raid6altivec4.c:   $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
	$(call if_changed,unroll)

CFLAGS_raid6altivec8.o += $(altivec_flags)
targets += raid6altivec8.c
$(obj)/raid6altivec8.c:   UNROLL := 8
$(obj)/raid6altivec8.c:   $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
	$(call if_changed,unroll)

quiet_cmd_mktable = TABLE   $@
      cmd_mktable = $(obj)/mktables > $@ || ( rm -f $@ && exit 1 )

targets += raid6tables.c
$(obj)/raid6tables.c: $(obj)/mktables FORCE
	$(call if_changed,mktable)
Commit	Line	Data
1da177e4 LT	1	#
	2	# Makefile for the kernel software RAID and LVM drivers.
	3	#
	4
	5	dm-mod-objs := dm.o dm-table.o dm-target.o dm-linear.o dm-stripe.o \
	6	dm-ioctl.o dm-io.o kcopyd.o
	7	dm-multipath-objs := dm-hw-handler.o dm-path-selector.o dm-mpath.o
	8	dm-snapshot-objs := dm-snap.o dm-exception-store.o
	9	dm-mirror-objs := dm-log.o dm-raid1.o
32a7627c	10	md-mod-objs := md.o bitmap.o
16a53ecc	11	raid456-objs := raid5.o raid6algos.o raid6recov.o raid6tables.o \
1da177e4 LT	12	raid6int1.o raid6int2.o raid6int4.o \
	13	raid6int8.o raid6int16.o raid6int32.o \
	14	raid6altivec1.o raid6altivec2.o raid6altivec4.o \
	15	raid6altivec8.o \
	16	raid6mmx.o raid6sse1.o raid6sse2.o
	17	hostprogs-y := mktables
	18
	19	# Note: link order is important. All raid personalities
	20	# and xor.o must come before md.o, as they each initialise
	21	# themselves, and md.o may use the personalities when it
	22	# auto-initialised.
	23
	24	obj-$(CONFIG_MD_LINEAR) += linear.o
	25	obj-$(CONFIG_MD_RAID0) += raid0.o
	26	obj-$(CONFIG_MD_RAID1) += raid1.o
	27	obj-$(CONFIG_MD_RAID10) += raid10.o
16a53ecc	28	obj-$(CONFIG_MD_RAID456) += raid456.o xor.o
1da177e4 LT	29	obj-$(CONFIG_MD_MULTIPATH) += multipath.o
1da177e4 LT	30	obj-$(CONFIG_MD_FAULTY) += faulty.o
32a7627c	31	obj-$(CONFIG_BLK_DEV_MD) += md-mod.o
1da177e4 LT	32	obj-$(CONFIG_BLK_DEV_DM) += dm-mod.o
1da177e4 LT	33	obj-$(CONFIG_DM_CRYPT) += dm-crypt.o
26b9f228	34	obj-$(CONFIG_DM_DELAY) += dm-delay.o
1da177e4 LT	35	obj-$(CONFIG_DM_MULTIPATH) += dm-multipath.o dm-round-robin.o
	36	obj-$(CONFIG_DM_MULTIPATH_EMC) += dm-emc.o
	37	obj-$(CONFIG_DM_SNAPSHOT) += dm-snapshot.o
	38	obj-$(CONFIG_DM_MIRROR) += dm-mirror.o
	39	obj-$(CONFIG_DM_ZERO) += dm-zero.o
	40
	41	quiet_cmd_unroll = UNROLL $@
	42	cmd_unroll = $(PERL) $(srctree)/$(src)/unroll.pl $(UNROLL) \
	43	< $< > $@ \|\| ( rm -f $@ && exit 1 )
	44
	45	ifeq ($(CONFIG_ALTIVEC),y)
	46	altivec_flags := -maltivec -mabi=altivec
	47	endif
	48
	49	targets += raid6int1.c
	50	$(obj)/raid6int1.c: UNROLL := 1
	51	$(obj)/raid6int1.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
	52	$(call if_changed,unroll)
	53
	54	targets += raid6int2.c
	55	$(obj)/raid6int2.c: UNROLL := 2
	56	$(obj)/raid6int2.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
	57	$(call if_changed,unroll)
	58
	59	targets += raid6int4.c
	60	$(obj)/raid6int4.c: UNROLL := 4
	61	$(obj)/raid6int4.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
	62	$(call if_changed,unroll)
	63
	64	targets += raid6int8.c
	65	$(obj)/raid6int8.c: UNROLL := 8
	66	$(obj)/raid6int8.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
	67	$(call if_changed,unroll)
	68
	69	targets += raid6int16.c
	70	$(obj)/raid6int16.c: UNROLL := 16
	71	$(obj)/raid6int16.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
	72	$(call if_changed,unroll)
	73
	74	targets += raid6int32.c
	75	$(obj)/raid6int32.c: UNROLL := 32
	76	$(obj)/raid6int32.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
	77	$(call if_changed,unroll)
	78
	79	CFLAGS_raid6altivec1.o += $(altivec_flags)
	80	targets += raid6altivec1.c
	81	$(obj)/raid6altivec1.c: UNROLL := 1
	82	$(obj)/raid6altivec1.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
	83	$(call if_changed,unroll)
	84
	85	CFLAGS_raid6altivec2.o += $(altivec_flags)
	86	targets += raid6altivec2.c
	87	$(obj)/raid6altivec2.c: UNROLL := 2
	88	$(obj)/raid6altivec2.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
	89	$(call if_changed,unroll)
	90
	91	CFLAGS_raid6altivec4.o += $(altivec_flags)
	92	targets += raid6altivec4.c
	93	$(obj)/raid6altivec4.c: UNROLL := 4
	94	$(obj)/raid6altivec4.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
	95	$(call if_changed,unroll)
	96
	97	CFLAGS_raid6altivec8.o += $(altivec_flags)
	98	targets += raid6altivec8.c
99	$(obj)/raid6altivec8.c: UNROLL := 8
100	$(obj)/raid6altivec8.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
101	$(call if_changed,unroll)
102
103	quiet_cmd_mktable = TABLE $@
104	cmd_mktable = $(obj)/mktables > $@ \|\| ( rm -f $@ && exit 1 )
105
106	targets += raid6tables.c
107	$(obj)/raid6tables.c: $(obj)/mktables FORCE
108	$(call if_changed,mktable)