[linux.git] / drivers / ata / pata_oldpiix.c

/*
 *    pata_oldpiix.c - Intel PATA/SATA controllers
 *
 *	(C) 2005 Red Hat <[email protected]>
 *
 *    Some parts based on ata_piix.c by Jeff Garzik and others.
 *
 *    Early PIIX differs significantly from the later PIIX as it lacks
 *    SITRE and the slave timing registers. This means that you have to
 *    set timing per channel, or be clever. Libata tells us whenever it
 *    does drive selection and we use this to reload the timings.
 *
 *    Because of these behaviour differences PIIX gets its own driver module.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <linux/ata.h>

#define DRV_NAME	"pata_oldpiix"
#define DRV_VERSION	"0.5.2"

/**
 *	oldpiix_pre_reset		-	probe begin
 *	@ap: ATA port
 *
 *	Set up cable type and use generic probe init
 */

static int oldpiix_pre_reset(struct ata_port *ap)
{
	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	static const struct pci_bits oldpiix_enable_bits[] = {
		{ 0x41U, 1U, 0x80UL, 0x80UL },	/* port 0 */
		{ 0x43U, 1U, 0x80UL, 0x80UL },	/* port 1 */
	};

	if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no]))
		return -ENOENT;
	ap->cbl = ATA_CBL_PATA40;
	return ata_std_prereset(ap);
}

/**
 *	oldpiix_pata_error_handler - Probe specified port on PATA host controller
 *	@ap: Port to probe
 *	@classes:
 *
 *	LOCKING:
 *	None (inherited from caller).
 */

static void oldpiix_pata_error_handler(struct ata_port *ap)
{
	ata_bmdma_drive_eh(ap, oldpiix_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
}

/**
 *	oldpiix_set_piomode - Initialize host controller PATA PIO timings
 *	@ap: Port whose timings we are configuring
 *	@adev: um
 *
 *	Set PIO mode for device, in host controller PCI config space.
 *
 *	LOCKING:
 *	None (inherited from caller).
 */

static void oldpiix_set_piomode (struct ata_port *ap, struct ata_device *adev)
{
	unsigned int pio	= adev->pio_mode - XFER_PIO_0;
	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
	unsigned int idetm_port= ap->port_no ? 0x42 : 0x40;
	u16 idetm_data;
	int control = 0;

	/*
	 *	See Intel Document 298600-004 for the timing programing rules
	 *	for PIIX/ICH. Note that the early PIIX does not have the slave
	 *	timing port at 0x44.
	 */

	static const	 /* ISP  RTC */
	u8 timings[][2]	= { { 0, 0 },
			    { 0, 0 },
			    { 1, 0 },
			    { 2, 1 },
			    { 2, 3 }, };

	if (pio > 2)
		control |= 1;	/* TIME1 enable */
	if (ata_pio_need_iordy(adev))
		control |= 2;	/* IE IORDY */

	/* Intel specifies that the PPE functionality is for disk only */
	if (adev->class == ATA_DEV_ATA)
		control |= 4;	/* PPE enable */

	pci_read_config_word(dev, idetm_port, &idetm_data);

	/* Enable PPE, IE and TIME as appropriate. Clear the other
	   drive timing bits */
	if (adev->devno == 0) {
		idetm_data &= 0xCCE0;
		idetm_data |= control;
	} else {
		idetm_data &= 0xCC0E;
		idetm_data |= (control << 4);
	}
	idetm_data |= (timings[pio][0] << 12) |
			(timings[pio][1] << 8);
	pci_write_config_word(dev, idetm_port, idetm_data);

	/* Track which port is configured */
	ap->private_data = adev;
}

/**
 *	oldpiix_set_dmamode - Initialize host controller PATA DMA timings
 *	@ap: Port whose timings we are configuring
 *	@adev: Device to program
 *	@isich: True if the device is an ICH and has IOCFG registers
 *
 *	Set MWDMA mode for device, in host controller PCI config space.
 *
 *	LOCKING:
 *	None (inherited from caller).
 */

static void oldpiix_set_dmamode (struct ata_port *ap, struct ata_device *adev)
{
	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
	u8 idetm_port		= ap->port_no ? 0x42 : 0x40;
	u16 idetm_data;

	static const	 /* ISP  RTC */
	u8 timings[][2]	= { { 0, 0 },
			    { 0, 0 },
			    { 1, 0 },
			    { 2, 1 },
			    { 2, 3 }, };

	/*
	 * MWDMA is driven by the PIO timings. We must also enable
	 * IORDY unconditionally along with TIME1. PPE has already
	 * been set when the PIO timing was set.
	 */

	unsigned int mwdma	= adev->dma_mode - XFER_MW_DMA_0;
	unsigned int control;
	const unsigned int needed_pio[3] = {
		XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
	};
	int pio = needed_pio[mwdma] - XFER_PIO_0;

	pci_read_config_word(dev, idetm_port, &idetm_data);

	control = 3;	/* IORDY|TIME0 */
	/* Intel specifies that the PPE functionality is for disk only */
	if (adev->class == ATA_DEV_ATA)
		control |= 4;	/* PPE enable */

	/* If the drive MWDMA is faster than it can do PIO then
	   we must force PIO into PIO0 */

	if (adev->pio_mode < needed_pio[mwdma])
		/* Enable DMA timing only */
		control |= 8;	/* PIO cycles in PIO0 */

	/* Mask out the relevant control and timing bits we will load. Also
	   clear the other drive TIME register as a precaution */
	if (adev->devno == 0) {
		idetm_data &= 0xCCE0;
		idetm_data |= control;
	} else {
		idetm_data &= 0xCC0E;
		idetm_data |= (control << 4);
	}
	idetm_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
	pci_write_config_word(dev, idetm_port, idetm_data);

	/* Track which port is configured */
	ap->private_data = adev;
}

/**
 *	oldpiix_qc_issue_prot	-	command issue
 *	@qc: command pending
 *
 *	Called when the libata layer is about to issue a command. We wrap
 *	this interface so that we can load the correct ATA timings if
 *	neccessary. Our logic also clears TIME0/TIME1 for the other device so
 *	that, even if we get this wrong, cycles to the other device will
 *	be made PIO0.
 */

static unsigned int oldpiix_qc_issue_prot(struct ata_queued_cmd *qc)
{
	struct ata_port *ap = qc->ap;
	struct ata_device *adev = qc->dev;

	if (adev != ap->private_data) {
		if (adev->dma_mode)
			oldpiix_set_dmamode(ap, adev);
		else if (adev->pio_mode)
			oldpiix_set_piomode(ap, adev);
	}
	return ata_qc_issue_prot(qc);
}


static struct scsi_host_template oldpiix_sht = {
	.module			= THIS_MODULE,
	.name			= DRV_NAME,
	.ioctl			= ata_scsi_ioctl,
	.queuecommand		= ata_scsi_queuecmd,
	.can_queue		= ATA_DEF_QUEUE,
	.this_id		= ATA_SHT_THIS_ID,
	.sg_tablesize		= LIBATA_MAX_PRD,
	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
	.emulated		= ATA_SHT_EMULATED,
	.use_clustering		= ATA_SHT_USE_CLUSTERING,
	.proc_name		= DRV_NAME,
	.dma_boundary		= ATA_DMA_BOUNDARY,
	.slave_configure	= ata_scsi_slave_config,
	.slave_destroy		= ata_scsi_slave_destroy,
	.bios_param		= ata_std_bios_param,
	.resume			= ata_scsi_device_resume,
	.suspend		= ata_scsi_device_suspend,
};

static const struct ata_port_operations oldpiix_pata_ops = {
	.port_disable		= ata_port_disable,
	.set_piomode		= oldpiix_set_piomode,
	.set_dmamode		= oldpiix_set_dmamode,
	.mode_filter		= ata_pci_default_filter,

	.tf_load		= ata_tf_load,
	.tf_read		= ata_tf_read,
	.check_status		= ata_check_status,
	.exec_command		= ata_exec_command,
	.dev_select		= ata_std_dev_select,

	.freeze			= ata_bmdma_freeze,
	.thaw			= ata_bmdma_thaw,
	.error_handler		= oldpiix_pata_error_handler,
	.post_internal_cmd 	= ata_bmdma_post_internal_cmd,

	.bmdma_setup		= ata_bmdma_setup,
	.bmdma_start		= ata_bmdma_start,
	.bmdma_stop		= ata_bmdma_stop,
	.bmdma_status		= ata_bmdma_status,
	.qc_prep		= ata_qc_prep,
	.qc_issue		= oldpiix_qc_issue_prot,
	.data_xfer		= ata_pio_data_xfer,

	.irq_handler		= ata_interrupt,
	.irq_clear		= ata_bmdma_irq_clear,

	.port_start		= ata_port_start,
	.port_stop		= ata_port_stop,
	.host_stop		= ata_host_stop,
};


/**
 *	oldpiix_init_one - Register PIIX ATA PCI device with kernel services
 *	@pdev: PCI device to register
 *	@ent: Entry in oldpiix_pci_tbl matching with @pdev
 *
 *	Called from kernel PCI layer.  We probe for combined mode (sigh),
 *	and then hand over control to libata, for it to do the rest.
 *
 *	LOCKING:
 *	Inherited from PCI layer (may sleep).
 *
 *	RETURNS:
 *	Zero on success, or -ERRNO value.
 */

static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
	static int printed_version;
	static struct ata_port_info info = {
		.sht		= &oldpiix_sht,
		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
		.pio_mask	= 0x1f,	/* pio0-4 */
		.mwdma_mask	= 0x07, /* mwdma1-2 */
		.port_ops	= &oldpiix_pata_ops,
	};
	static struct ata_port_info *port_info[2] = { &info, &info };

	if (!printed_version++)
		dev_printk(KERN_DEBUG, &pdev->dev,
			   "version " DRV_VERSION "\n");

	return ata_pci_init_one(pdev, port_info, 2);
}

static const struct pci_device_id oldpiix_pci_tbl[] = {
	{ PCI_VDEVICE(INTEL, 0x1230), },

	{ }	/* terminate list */
};

static struct pci_driver oldpiix_pci_driver = {
	.name			= DRV_NAME,
	.id_table		= oldpiix_pci_tbl,
	.probe			= oldpiix_init_one,
	.remove			= ata_pci_remove_one,
	.suspend		= ata_pci_device_suspend,
	.resume			= ata_pci_device_resume,
};

static int __init oldpiix_init(void)
{
	return pci_register_driver(&oldpiix_pci_driver);
}

static void __exit oldpiix_exit(void)
{
	pci_unregister_driver(&oldpiix_pci_driver);
}

module_init(oldpiix_init);
module_exit(oldpiix_exit);

MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("SCSI low-level driver for early PIIX series controllers");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, oldpiix_pci_tbl);
MODULE_VERSION(DRV_VERSION);
Commit	Line	Data
669a5db4 JG	1	/*
	2	* pata_oldpiix.c - Intel PATA/SATA controllers
	3	*
	4	* (C) 2005 Red Hat <[email protected]>
	5	*
	6	* Some parts based on ata_piix.c by Jeff Garzik and others.
	7	*
	8	* Early PIIX differs significantly from the later PIIX as it lacks
	9	* SITRE and the slave timing registers. This means that you have to
	10	* set timing per channel, or be clever. Libata tells us whenever it
	11	* does drive selection and we use this to reload the timings.
	12	*
	13	* Because of these behaviour differences PIIX gets its own driver module.
	14	*/
	15
	16	#include <linux/kernel.h>
	17	#include <linux/module.h>
	18	#include <linux/pci.h>
	19	#include <linux/init.h>
	20	#include <linux/blkdev.h>
	21	#include <linux/delay.h>
	22	#include <linux/device.h>
	23	#include <scsi/scsi_host.h>
	24	#include <linux/libata.h>
	25	#include <linux/ata.h>
	26
	27	#define DRV_NAME "pata_oldpiix"
c961922b	28	#define DRV_VERSION "0.5.2"
669a5db4 JG	29
	30	/**
	31	* oldpiix_pre_reset - probe begin
	32	* @ap: ATA port
	33	*
	34	* Set up cable type and use generic probe init
	35	*/
	36
	37	static int oldpiix_pre_reset(struct ata_port *ap)
	38	{
	39	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	40	static const struct pci_bits oldpiix_enable_bits[] = {
	41	{ 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */
	42	{ 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */
	43	};
	44
c961922b AC	45	if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no]))
c961922b AC	46	return -ENOENT;
669a5db4 JG	47	ap->cbl = ATA_CBL_PATA40;
	48	return ata_std_prereset(ap);
	49	}
	50
	51	/**
	52	* oldpiix_pata_error_handler - Probe specified port on PATA host controller
	53	* @ap: Port to probe
	54	* @classes:
	55	*
	56	* LOCKING:
	57	* None (inherited from caller).
	58	*/
	59
	60	static void oldpiix_pata_error_handler(struct ata_port *ap)
	61	{
	62	ata_bmdma_drive_eh(ap, oldpiix_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
	63	}
	64
	65	/**
	66	* oldpiix_set_piomode - Initialize host controller PATA PIO timings
	67	* @ap: Port whose timings we are configuring
	68	* @adev: um
	69	*
	70	* Set PIO mode for device, in host controller PCI config space.
	71	*
	72	* LOCKING:
	73	* None (inherited from caller).
	74	*/
	75
	76	static void oldpiix_set_piomode (struct ata_port ap, struct ata_device adev)
	77	{
	78	unsigned int pio = adev->pio_mode - XFER_PIO_0;
	79	struct pci_dev *dev = to_pci_dev(ap->host->dev);
	80	unsigned int idetm_port= ap->port_no ? 0x42 : 0x40;
	81	u16 idetm_data;
	82	int control = 0;
	83
	84	/*
	85	* See Intel Document 298600-004 for the timing programing rules
	86	* for PIIX/ICH. Note that the early PIIX does not have the slave
	87	* timing port at 0x44.
	88	*/
	89
	90	static const /* ISP RTC */
	91	u8 timings[][2] = { { 0, 0 },
	92	{ 0, 0 },
	93	{ 1, 0 },
	94	{ 2, 1 },
	95	{ 2, 3 }, };
	96
	97	if (pio > 2)
	98	control \|= 1; /* TIME1 enable */
	99	if (ata_pio_need_iordy(adev))
	100	control \|= 2; /* IE IORDY */
	101
	102	/* Intel specifies that the PPE functionality is for disk only */
	103	if (adev->class == ATA_DEV_ATA)
	104	control \|= 4; /* PPE enable */
	105
	106	pci_read_config_word(dev, idetm_port, &idetm_data);
	107
	108	/* Enable PPE, IE and TIME as appropriate. Clear the other
	109	drive timing bits */
	110	if (adev->devno == 0) {
111	idetm_data &= 0xCCE0;
112	idetm_data \|= control;
113	} else {
114	idetm_data &= 0xCC0E;
115	idetm_data \|= (control << 4);
116	}
117	idetm_data \|= (timings[pio][0] << 12) \|
118	(timings[pio][1] << 8);
119	pci_write_config_word(dev, idetm_port, idetm_data);
120
121	/* Track which port is configured */
122	ap->private_data = adev;
123	}
124
125	/**
126	* oldpiix_set_dmamode - Initialize host controller PATA DMA timings
127	* @ap: Port whose timings we are configuring
128	* @adev: Device to program
129	* @isich: True if the device is an ICH and has IOCFG registers
130	*
131	* Set MWDMA mode for device, in host controller PCI config space.
132	*
133	* LOCKING:
134	* None (inherited from caller).
135	*/
136
137	static void oldpiix_set_dmamode (struct ata_port ap, struct ata_device adev)
138	{
139	struct pci_dev *dev = to_pci_dev(ap->host->dev);
140	u8 idetm_port = ap->port_no ? 0x42 : 0x40;
141	u16 idetm_data;
142
143	static const /* ISP RTC */
144	u8 timings[][2] = { { 0, 0 },
145	{ 0, 0 },
146	{ 1, 0 },
147	{ 2, 1 },
148	{ 2, 3 }, };
149
150	/*
151	* MWDMA is driven by the PIO timings. We must also enable
152	* IORDY unconditionally along with TIME1. PPE has already
153	* been set when the PIO timing was set.
154	*/
155
156	unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0;
157	unsigned int control;
158	const unsigned int needed_pio[3] = {
159	XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
160	};
161	int pio = needed_pio[mwdma] - XFER_PIO_0;
162
163	pci_read_config_word(dev, idetm_port, &idetm_data);
164
165	control = 3; /* IORDY\|TIME0 */
166	/* Intel specifies that the PPE functionality is for disk only */
167	if (adev->class == ATA_DEV_ATA)
168	control \|= 4; /* PPE enable */
169
170	/* If the drive MWDMA is faster than it can do PIO then
171	we must force PIO into PIO0 */
172
173	if (adev->pio_mode < needed_pio[mwdma])
174	/* Enable DMA timing only */
175	control \|= 8; /* PIO cycles in PIO0 */
176
177	/* Mask out the relevant control and timing bits we will load. Also
178	clear the other drive TIME register as a precaution */
179	if (adev->devno == 0) {
180	idetm_data &= 0xCCE0;
181	idetm_data \|= control;
182	} else {
183	idetm_data &= 0xCC0E;
184	idetm_data \|= (control << 4);
185	}
186	idetm_data \|= (timings[pio][0] << 12) \| (timings[pio][1] << 8);
187	pci_write_config_word(dev, idetm_port, idetm_data);
188
189	/* Track which port is configured */
190	ap->private_data = adev;
191	}
192
193	/**
194	* oldpiix_qc_issue_prot - command issue
195	* @qc: command pending
196	*
197	* Called when the libata layer is about to issue a command. We wrap
198	* this interface so that we can load the correct ATA timings if
199	* neccessary. Our logic also clears TIME0/TIME1 for the other device so
200	* that, even if we get this wrong, cycles to the other device will
201	* be made PIO0.
202	*/
203
204	static unsigned int oldpiix_qc_issue_prot(struct ata_queued_cmd *qc)
205	{
206	struct ata_port *ap = qc->ap;
207	struct ata_device *adev = qc->dev;
208
209	if (adev != ap->private_data) {
210	if (adev->dma_mode)
211	oldpiix_set_dmamode(ap, adev);
212	else if (adev->pio_mode)
213	oldpiix_set_piomode(ap, adev);
214	}
215	return ata_qc_issue_prot(qc);
216	}
217
218
219	static struct scsi_host_template oldpiix_sht = {
220	.module = THIS_MODULE,
221	.name = DRV_NAME,
222	.ioctl = ata_scsi_ioctl,
223	.queuecommand = ata_scsi_queuecmd,
224	.can_queue = ATA_DEF_QUEUE,
225	.this_id = ATA_SHT_THIS_ID,
226	.sg_tablesize = LIBATA_MAX_PRD,
669a5db4 JG	227	.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
	228	.emulated = ATA_SHT_EMULATED,
	229	.use_clustering = ATA_SHT_USE_CLUSTERING,
	230	.proc_name = DRV_NAME,
	231	.dma_boundary = ATA_DMA_BOUNDARY,
	232	.slave_configure = ata_scsi_slave_config,
afdfe899	233	.slave_destroy = ata_scsi_slave_destroy,
669a5db4	234	.bios_param = ata_std_bios_param,
30ced0f0 AC	235	.resume = ata_scsi_device_resume,
30ced0f0 AC	236	.suspend = ata_scsi_device_suspend,
669a5db4 JG	237	};
	238
	239	static const struct ata_port_operations oldpiix_pata_ops = {
	240	.port_disable = ata_port_disable,
	241	.set_piomode = oldpiix_set_piomode,
	242	.set_dmamode = oldpiix_set_dmamode,
	243	.mode_filter = ata_pci_default_filter,
	244
	245	.tf_load = ata_tf_load,
	246	.tf_read = ata_tf_read,
	247	.check_status = ata_check_status,
	248	.exec_command = ata_exec_command,
	249	.dev_select = ata_std_dev_select,
	250
	251	.freeze = ata_bmdma_freeze,
	252	.thaw = ata_bmdma_thaw,
	253	.error_handler = oldpiix_pata_error_handler,
	254	.post_internal_cmd = ata_bmdma_post_internal_cmd,
	255
	256	.bmdma_setup = ata_bmdma_setup,
	257	.bmdma_start = ata_bmdma_start,
	258	.bmdma_stop = ata_bmdma_stop,
	259	.bmdma_status = ata_bmdma_status,
	260	.qc_prep = ata_qc_prep,
	261	.qc_issue = oldpiix_qc_issue_prot,
	262	.data_xfer = ata_pio_data_xfer,
	263
	264	.irq_handler = ata_interrupt,
	265	.irq_clear = ata_bmdma_irq_clear,
	266
	267	.port_start = ata_port_start,
	268	.port_stop = ata_port_stop,
	269	.host_stop = ata_host_stop,
	270	};
	271
	272
	273	/**
	274	* oldpiix_init_one - Register PIIX ATA PCI device with kernel services
	275	* @pdev: PCI device to register
	276	* @ent: Entry in oldpiix_pci_tbl matching with @pdev
	277	*
	278	* Called from kernel PCI layer. We probe for combined mode (sigh),
	279	* and then hand over control to libata, for it to do the rest.
	280	*
	281	* LOCKING:
	282	* Inherited from PCI layer (may sleep).
	283	*
	284	* RETURNS:
	285	* Zero on success, or -ERRNO value.
	286	*/
	287
	288	static int oldpiix_init_one (struct pci_dev pdev, const struct pci_device_id ent)
	289	{
	290	static int printed_version;
	291	static struct ata_port_info info = {
	292	.sht = &oldpiix_sht,
	293	.flags = ATA_FLAG_SLAVE_POSS \| ATA_FLAG_SRST,
	294	.pio_mask = 0x1f, /* pio0-4 */
	295	.mwdma_mask = 0x07, /* mwdma1-2 */
	296	.port_ops = &oldpiix_pata_ops,
	297	};
	298	static struct ata_port_info *port_info[2] = { &info, &info };
	299
	300	if (!printed_version++)
301	dev_printk(KERN_DEBUG, &pdev->dev,
302	"version " DRV_VERSION "\n");
303
304	return ata_pci_init_one(pdev, port_info, 2);
305	}
306
307	static const struct pci_device_id oldpiix_pci_tbl[] = {
2d2744fc JG	308	{ PCI_VDEVICE(INTEL, 0x1230), },
2d2744fc JG	309
669a5db4 JG	310	{ } /* terminate list */
	311	};
	312
	313	static struct pci_driver oldpiix_pci_driver = {
	314	.name = DRV_NAME,
	315	.id_table = oldpiix_pci_tbl,
	316	.probe = oldpiix_init_one,
	317	.remove = ata_pci_remove_one,
30ced0f0 AC	318	.suspend = ata_pci_device_suspend,
30ced0f0 AC	319	.resume = ata_pci_device_resume,
669a5db4 JG	320	};
	321
	322	static int __init oldpiix_init(void)
	323	{
	324	return pci_register_driver(&oldpiix_pci_driver);
	325	}
	326
	327	static void __exit oldpiix_exit(void)
	328	{
	329	pci_unregister_driver(&oldpiix_pci_driver);
	330	}
	331
669a5db4 JG	332	module_init(oldpiix_init);
	333	module_exit(oldpiix_exit);
	334
	335	MODULE_AUTHOR("Alan Cox");
	336	MODULE_DESCRIPTION("SCSI low-level driver for early PIIX series controllers");
	337	MODULE_LICENSE("GPL");
	338	MODULE_DEVICE_TABLE(pci, oldpiix_pci_tbl);
	339	MODULE_VERSION(DRV_VERSION);
	340