]>
Commit | Line | Data |
---|---|---|
e5779998 DM |
1 | /* |
2 | * This program is free software; you can redistribute it and/or modify | |
3 | * it under the terms of the GNU General Public License as published by | |
4 | * the Free Software Foundation; either version 2 of the License, or | |
5 | * (at your option) any later version. | |
6 | * | |
7 | * This program is distributed in the hope that it will be useful, | |
8 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
9 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
10 | * GNU General Public License for more details. | |
11 | * | |
12 | * You should have received a copy of the GNU General Public License | |
13 | * along with this program; if not, write to the Free Software | |
14 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
15 | */ | |
16 | ||
17 | #include <linux/init.h> | |
36db0456 | 18 | #include <linux/slab.h> |
e5779998 DM |
19 | #include <linux/usb.h> |
20 | #include <linux/usb/audio.h> | |
21 | ||
9e38658f | 22 | #include <sound/control.h> |
e5779998 DM |
23 | #include <sound/core.h> |
24 | #include <sound/info.h> | |
25 | #include <sound/pcm.h> | |
26 | ||
27 | #include "usbaudio.h" | |
28 | #include "card.h" | |
f0b5e634 | 29 | #include "mixer.h" |
7b1eda22 | 30 | #include "mixer_quirks.h" |
e5779998 DM |
31 | #include "midi.h" |
32 | #include "quirks.h" | |
33 | #include "helper.h" | |
34 | #include "endpoint.h" | |
35 | #include "pcm.h" | |
3d8d4dcf | 36 | #include "clock.h" |
e8e8babf | 37 | #include "stream.h" |
e5779998 DM |
38 | |
39 | /* | |
40 | * handle the quirks for the contained interfaces | |
41 | */ | |
42 | static int create_composite_quirk(struct snd_usb_audio *chip, | |
43 | struct usb_interface *iface, | |
44 | struct usb_driver *driver, | |
45 | const struct snd_usb_audio_quirk *quirk) | |
46 | { | |
47 | int probed_ifnum = get_iface_desc(iface->altsetting)->bInterfaceNumber; | |
48 | int err; | |
49 | ||
50 | for (quirk = quirk->data; quirk->ifnum >= 0; ++quirk) { | |
51 | iface = usb_ifnum_to_if(chip->dev, quirk->ifnum); | |
52 | if (!iface) | |
53 | continue; | |
54 | if (quirk->ifnum != probed_ifnum && | |
55 | usb_interface_claimed(iface)) | |
56 | continue; | |
57 | err = snd_usb_create_quirk(chip, iface, driver, quirk); | |
58 | if (err < 0) | |
59 | return err; | |
60 | if (quirk->ifnum != probed_ifnum) | |
61 | usb_driver_claim_interface(driver, iface, (void *)-1L); | |
62 | } | |
63 | return 0; | |
64 | } | |
65 | ||
66 | static int ignore_interface_quirk(struct snd_usb_audio *chip, | |
67 | struct usb_interface *iface, | |
68 | struct usb_driver *driver, | |
69 | const struct snd_usb_audio_quirk *quirk) | |
70 | { | |
71 | return 0; | |
72 | } | |
73 | ||
74 | ||
75 | /* | |
76 | * Allow alignment on audio sub-slot (channel samples) rather than | |
77 | * on audio slots (audio frames) | |
78 | */ | |
79 | static int create_align_transfer_quirk(struct snd_usb_audio *chip, | |
80 | struct usb_interface *iface, | |
81 | struct usb_driver *driver, | |
82 | const struct snd_usb_audio_quirk *quirk) | |
83 | { | |
84 | chip->txfr_quirk = 1; | |
85 | return 1; /* Continue with creating streams and mixer */ | |
86 | } | |
87 | ||
88 | static int create_any_midi_quirk(struct snd_usb_audio *chip, | |
89 | struct usb_interface *intf, | |
90 | struct usb_driver *driver, | |
91 | const struct snd_usb_audio_quirk *quirk) | |
92 | { | |
93 | return snd_usbmidi_create(chip->card, intf, &chip->midi_list, quirk); | |
94 | } | |
95 | ||
96 | /* | |
97 | * create a stream for an interface with proper descriptors | |
98 | */ | |
99 | static int create_standard_audio_quirk(struct snd_usb_audio *chip, | |
100 | struct usb_interface *iface, | |
101 | struct usb_driver *driver, | |
102 | const struct snd_usb_audio_quirk *quirk) | |
103 | { | |
104 | struct usb_host_interface *alts; | |
105 | struct usb_interface_descriptor *altsd; | |
106 | int err; | |
107 | ||
108 | alts = &iface->altsetting[0]; | |
109 | altsd = get_iface_desc(alts); | |
e8e8babf | 110 | err = snd_usb_parse_audio_interface(chip, altsd->bInterfaceNumber); |
e5779998 DM |
111 | if (err < 0) { |
112 | snd_printk(KERN_ERR "cannot setup if %d: error %d\n", | |
113 | altsd->bInterfaceNumber, err); | |
114 | return err; | |
115 | } | |
116 | /* reset the current interface */ | |
117 | usb_set_interface(chip->dev, altsd->bInterfaceNumber, 0); | |
118 | return 0; | |
119 | } | |
120 | ||
121 | /* | |
122 | * create a stream for an endpoint/altsetting without proper descriptors | |
123 | */ | |
124 | static int create_fixed_stream_quirk(struct snd_usb_audio *chip, | |
125 | struct usb_interface *iface, | |
126 | struct usb_driver *driver, | |
127 | const struct snd_usb_audio_quirk *quirk) | |
128 | { | |
129 | struct audioformat *fp; | |
130 | struct usb_host_interface *alts; | |
131 | int stream, err; | |
132 | unsigned *rate_table = NULL; | |
133 | ||
134 | fp = kmemdup(quirk->data, sizeof(*fp), GFP_KERNEL); | |
135 | if (! fp) { | |
136 | snd_printk(KERN_ERR "cannot memdup\n"); | |
137 | return -ENOMEM; | |
138 | } | |
139 | if (fp->nr_rates > 0) { | |
140 | rate_table = kmalloc(sizeof(int) * fp->nr_rates, GFP_KERNEL); | |
141 | if (!rate_table) { | |
142 | kfree(fp); | |
143 | return -ENOMEM; | |
144 | } | |
145 | memcpy(rate_table, fp->rate_table, sizeof(int) * fp->nr_rates); | |
146 | fp->rate_table = rate_table; | |
147 | } | |
148 | ||
149 | stream = (fp->endpoint & USB_DIR_IN) | |
150 | ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK; | |
e8e8babf | 151 | err = snd_usb_add_audio_stream(chip, stream, fp); |
e5779998 DM |
152 | if (err < 0) { |
153 | kfree(fp); | |
154 | kfree(rate_table); | |
155 | return err; | |
156 | } | |
157 | if (fp->iface != get_iface_desc(&iface->altsetting[0])->bInterfaceNumber || | |
158 | fp->altset_idx >= iface->num_altsetting) { | |
159 | kfree(fp); | |
160 | kfree(rate_table); | |
161 | return -EINVAL; | |
162 | } | |
163 | alts = &iface->altsetting[fp->altset_idx]; | |
164 | fp->datainterval = snd_usb_parse_datainterval(chip, alts); | |
165 | fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize); | |
166 | usb_set_interface(chip->dev, fp->iface, 0); | |
767d75ad DM |
167 | snd_usb_init_pitch(chip, fp->iface, alts, fp); |
168 | snd_usb_init_sample_rate(chip, fp->iface, alts, fp, fp->rate_max); | |
e5779998 DM |
169 | return 0; |
170 | } | |
171 | ||
172 | /* | |
173 | * Create a stream for an Edirol UA-700/UA-25/UA-4FX interface. | |
174 | * The only way to detect the sample rate is by looking at wMaxPacketSize. | |
175 | */ | |
176 | static int create_uaxx_quirk(struct snd_usb_audio *chip, | |
177 | struct usb_interface *iface, | |
178 | struct usb_driver *driver, | |
179 | const struct snd_usb_audio_quirk *quirk) | |
180 | { | |
181 | static const struct audioformat ua_format = { | |
015eb0b0 | 182 | .formats = SNDRV_PCM_FMTBIT_S24_3LE, |
e5779998 DM |
183 | .channels = 2, |
184 | .fmt_type = UAC_FORMAT_TYPE_I, | |
185 | .altsetting = 1, | |
186 | .altset_idx = 1, | |
187 | .rates = SNDRV_PCM_RATE_CONTINUOUS, | |
188 | }; | |
189 | struct usb_host_interface *alts; | |
190 | struct usb_interface_descriptor *altsd; | |
191 | struct audioformat *fp; | |
192 | int stream, err; | |
193 | ||
194 | /* both PCM and MIDI interfaces have 2 or more altsettings */ | |
195 | if (iface->num_altsetting < 2) | |
196 | return -ENXIO; | |
197 | alts = &iface->altsetting[1]; | |
198 | altsd = get_iface_desc(alts); | |
199 | ||
200 | if (altsd->bNumEndpoints == 2) { | |
201 | static const struct snd_usb_midi_endpoint_info ua700_ep = { | |
202 | .out_cables = 0x0003, | |
203 | .in_cables = 0x0003 | |
204 | }; | |
205 | static const struct snd_usb_audio_quirk ua700_quirk = { | |
206 | .type = QUIRK_MIDI_FIXED_ENDPOINT, | |
207 | .data = &ua700_ep | |
208 | }; | |
209 | static const struct snd_usb_midi_endpoint_info uaxx_ep = { | |
210 | .out_cables = 0x0001, | |
211 | .in_cables = 0x0001 | |
212 | }; | |
213 | static const struct snd_usb_audio_quirk uaxx_quirk = { | |
214 | .type = QUIRK_MIDI_FIXED_ENDPOINT, | |
215 | .data = &uaxx_ep | |
216 | }; | |
217 | const struct snd_usb_audio_quirk *quirk = | |
218 | chip->usb_id == USB_ID(0x0582, 0x002b) | |
219 | ? &ua700_quirk : &uaxx_quirk; | |
220 | return snd_usbmidi_create(chip->card, iface, | |
221 | &chip->midi_list, quirk); | |
222 | } | |
223 | ||
224 | if (altsd->bNumEndpoints != 1) | |
225 | return -ENXIO; | |
226 | ||
227 | fp = kmalloc(sizeof(*fp), GFP_KERNEL); | |
228 | if (!fp) | |
229 | return -ENOMEM; | |
230 | memcpy(fp, &ua_format, sizeof(*fp)); | |
231 | ||
232 | fp->iface = altsd->bInterfaceNumber; | |
233 | fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress; | |
234 | fp->ep_attr = get_endpoint(alts, 0)->bmAttributes; | |
235 | fp->datainterval = 0; | |
236 | fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize); | |
237 | ||
238 | switch (fp->maxpacksize) { | |
239 | case 0x120: | |
240 | fp->rate_max = fp->rate_min = 44100; | |
241 | break; | |
242 | case 0x138: | |
243 | case 0x140: | |
244 | fp->rate_max = fp->rate_min = 48000; | |
245 | break; | |
246 | case 0x258: | |
247 | case 0x260: | |
248 | fp->rate_max = fp->rate_min = 96000; | |
249 | break; | |
250 | default: | |
251 | snd_printk(KERN_ERR "unknown sample rate\n"); | |
252 | kfree(fp); | |
253 | return -ENXIO; | |
254 | } | |
255 | ||
256 | stream = (fp->endpoint & USB_DIR_IN) | |
257 | ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK; | |
e8e8babf | 258 | err = snd_usb_add_audio_stream(chip, stream, fp); |
e5779998 DM |
259 | if (err < 0) { |
260 | kfree(fp); | |
261 | return err; | |
262 | } | |
263 | usb_set_interface(chip->dev, fp->iface, 0); | |
264 | return 0; | |
265 | } | |
266 | ||
014950b0 DM |
267 | /* |
268 | * Create a standard mixer for the specified interface. | |
269 | */ | |
270 | static int create_standard_mixer_quirk(struct snd_usb_audio *chip, | |
271 | struct usb_interface *iface, | |
272 | struct usb_driver *driver, | |
273 | const struct snd_usb_audio_quirk *quirk) | |
274 | { | |
275 | if (quirk->ifnum < 0) | |
276 | return 0; | |
277 | ||
278 | return snd_usb_create_mixer(chip, quirk->ifnum, 0); | |
279 | } | |
280 | ||
e5779998 DM |
281 | /* |
282 | * audio-interface quirks | |
283 | * | |
284 | * returns zero if no standard audio/MIDI parsing is needed. | |
25985edc | 285 | * returns a positive value if standard audio/midi interfaces are parsed |
e5779998 DM |
286 | * after this. |
287 | * returns a negative value at error. | |
288 | */ | |
289 | int snd_usb_create_quirk(struct snd_usb_audio *chip, | |
290 | struct usb_interface *iface, | |
291 | struct usb_driver *driver, | |
292 | const struct snd_usb_audio_quirk *quirk) | |
293 | { | |
294 | typedef int (*quirk_func_t)(struct snd_usb_audio *, | |
295 | struct usb_interface *, | |
296 | struct usb_driver *, | |
297 | const struct snd_usb_audio_quirk *); | |
298 | static const quirk_func_t quirk_funcs[] = { | |
299 | [QUIRK_IGNORE_INTERFACE] = ignore_interface_quirk, | |
300 | [QUIRK_COMPOSITE] = create_composite_quirk, | |
301 | [QUIRK_MIDI_STANDARD_INTERFACE] = create_any_midi_quirk, | |
302 | [QUIRK_MIDI_FIXED_ENDPOINT] = create_any_midi_quirk, | |
303 | [QUIRK_MIDI_YAMAHA] = create_any_midi_quirk, | |
304 | [QUIRK_MIDI_MIDIMAN] = create_any_midi_quirk, | |
305 | [QUIRK_MIDI_NOVATION] = create_any_midi_quirk, | |
c7f57216 | 306 | [QUIRK_MIDI_RAW_BYTES] = create_any_midi_quirk, |
e5779998 DM |
307 | [QUIRK_MIDI_EMAGIC] = create_any_midi_quirk, |
308 | [QUIRK_MIDI_CME] = create_any_midi_quirk, | |
4434ade8 | 309 | [QUIRK_MIDI_AKAI] = create_any_midi_quirk, |
1ef0e0a0 | 310 | [QUIRK_MIDI_FTDI] = create_any_midi_quirk, |
e5779998 DM |
311 | [QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk, |
312 | [QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk, | |
313 | [QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk, | |
014950b0 DM |
314 | [QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk, |
315 | [QUIRK_AUDIO_STANDARD_MIXER] = create_standard_mixer_quirk, | |
e5779998 DM |
316 | }; |
317 | ||
318 | if (quirk->type < QUIRK_TYPE_COUNT) { | |
319 | return quirk_funcs[quirk->type](chip, iface, driver, quirk); | |
320 | } else { | |
321 | snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type); | |
322 | return -ENXIO; | |
323 | } | |
324 | } | |
325 | ||
326 | /* | |
327 | * boot quirks | |
328 | */ | |
329 | ||
330 | #define EXTIGY_FIRMWARE_SIZE_OLD 794 | |
331 | #define EXTIGY_FIRMWARE_SIZE_NEW 483 | |
332 | ||
333 | static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interface *intf) | |
334 | { | |
335 | struct usb_host_config *config = dev->actconfig; | |
336 | int err; | |
337 | ||
338 | if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD || | |
339 | le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_NEW) { | |
340 | snd_printdd("sending Extigy boot sequence...\n"); | |
341 | /* Send message to force it to reconnect with full interface. */ | |
342 | err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev,0), | |
17d900c4 | 343 | 0x10, 0x43, 0x0001, 0x000a, NULL, 0); |
e5779998 DM |
344 | if (err < 0) snd_printdd("error sending boot message: %d\n", err); |
345 | err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, | |
346 | &dev->descriptor, sizeof(dev->descriptor)); | |
347 | config = dev->actconfig; | |
348 | if (err < 0) snd_printdd("error usb_get_descriptor: %d\n", err); | |
349 | err = usb_reset_configuration(dev); | |
350 | if (err < 0) snd_printdd("error usb_reset_configuration: %d\n", err); | |
351 | snd_printdd("extigy_boot: new boot length = %d\n", | |
352 | le16_to_cpu(get_cfg_desc(config)->wTotalLength)); | |
353 | return -ENODEV; /* quit this anyway */ | |
354 | } | |
355 | return 0; | |
356 | } | |
357 | ||
358 | static int snd_usb_audigy2nx_boot_quirk(struct usb_device *dev) | |
359 | { | |
360 | u8 buf = 1; | |
361 | ||
362 | snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 0x2a, | |
363 | USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER, | |
17d900c4 | 364 | 0, 0, &buf, 1); |
e5779998 DM |
365 | if (buf == 0) { |
366 | snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x29, | |
367 | USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER, | |
17d900c4 | 368 | 1, 2000, NULL, 0); |
e5779998 DM |
369 | return -ENODEV; |
370 | } | |
371 | return 0; | |
372 | } | |
373 | ||
0f5733b0 GP |
374 | static int snd_usb_fasttrackpro_boot_quirk(struct usb_device *dev) |
375 | { | |
376 | int err; | |
377 | ||
378 | if (dev->actconfig->desc.bConfigurationValue == 1) { | |
379 | snd_printk(KERN_INFO "usb-audio: " | |
380 | "Fast Track Pro switching to config #2\n"); | |
381 | /* This function has to be available by the usb core module. | |
382 | * if it is not avialable the boot quirk has to be left out | |
383 | * and the configuration has to be set by udev or hotplug | |
384 | * rules | |
385 | */ | |
386 | err = usb_driver_set_configuration(dev, 2); | |
387 | if (err < 0) { | |
388 | snd_printdd("error usb_driver_set_configuration: %d\n", | |
389 | err); | |
390 | return -ENODEV; | |
391 | } | |
392 | } else | |
393 | snd_printk(KERN_INFO "usb-audio: Fast Track Pro config OK\n"); | |
394 | ||
395 | return 0; | |
396 | } | |
397 | ||
e5779998 DM |
398 | /* |
399 | * C-Media CM106/CM106+ have four 16-bit internal registers that are nicely | |
400 | * documented in the device's data sheet. | |
401 | */ | |
402 | static int snd_usb_cm106_write_int_reg(struct usb_device *dev, int reg, u16 value) | |
403 | { | |
404 | u8 buf[4]; | |
405 | buf[0] = 0x20; | |
406 | buf[1] = value & 0xff; | |
407 | buf[2] = (value >> 8) & 0xff; | |
408 | buf[3] = reg; | |
409 | return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION, | |
410 | USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT, | |
17d900c4 | 411 | 0, 0, &buf, 4); |
e5779998 DM |
412 | } |
413 | ||
414 | static int snd_usb_cm106_boot_quirk(struct usb_device *dev) | |
415 | { | |
416 | /* | |
417 | * Enable line-out driver mode, set headphone source to front | |
418 | * channels, enable stereo mic. | |
419 | */ | |
420 | return snd_usb_cm106_write_int_reg(dev, 2, 0x8004); | |
421 | } | |
422 | ||
423 | /* | |
424 | * C-Media CM6206 is based on CM106 with two additional | |
425 | * registers that are not documented in the data sheet. | |
426 | * Values here are chosen based on sniffing USB traffic | |
427 | * under Windows. | |
428 | */ | |
429 | static int snd_usb_cm6206_boot_quirk(struct usb_device *dev) | |
430 | { | |
dac8f847 | 431 | int err = 0, reg; |
157186bc | 432 | int val[] = {0x2004, 0x3000, 0xf800, 0x143f, 0x0000, 0x3000}; |
e5779998 DM |
433 | |
434 | for (reg = 0; reg < ARRAY_SIZE(val); reg++) { | |
435 | err = snd_usb_cm106_write_int_reg(dev, reg, val[reg]); | |
436 | if (err < 0) | |
437 | return err; | |
438 | } | |
439 | ||
440 | return err; | |
441 | } | |
442 | ||
443 | /* | |
444 | * This call will put the synth in "USB send" mode, i.e it will send MIDI | |
445 | * messages through USB (this is disabled at startup). The synth will | |
446 | * acknowledge by sending a sysex on endpoint 0x85 and by displaying a USB | |
447 | * sign on its LCD. Values here are chosen based on sniffing USB traffic | |
448 | * under Windows. | |
449 | */ | |
450 | static int snd_usb_accessmusic_boot_quirk(struct usb_device *dev) | |
451 | { | |
452 | int err, actual_length; | |
453 | ||
454 | /* "midi send" enable */ | |
455 | static const u8 seq[] = { 0x4e, 0x73, 0x52, 0x01 }; | |
456 | ||
457 | void *buf = kmemdup(seq, ARRAY_SIZE(seq), GFP_KERNEL); | |
458 | if (!buf) | |
459 | return -ENOMEM; | |
460 | err = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x05), buf, | |
461 | ARRAY_SIZE(seq), &actual_length, 1000); | |
462 | kfree(buf); | |
463 | if (err < 0) | |
464 | return err; | |
465 | ||
466 | return 0; | |
467 | } | |
468 | ||
54a8c500 DM |
469 | /* |
470 | * Some sound cards from Native Instruments are in fact compliant to the USB | |
471 | * audio standard of version 2 and other approved USB standards, even though | |
472 | * they come up as vendor-specific device when first connected. | |
473 | * | |
474 | * However, they can be told to come up with a new set of descriptors | |
475 | * upon their next enumeration, and the interfaces announced by the new | |
476 | * descriptors will then be handled by the kernel's class drivers. As the | |
477 | * product ID will also change, no further checks are required. | |
478 | */ | |
479 | ||
480 | static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev) | |
481 | { | |
482 | int ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
483 | 0xaf, USB_TYPE_VENDOR | USB_RECIP_DEVICE, | |
484 | cpu_to_le16(1), 0, NULL, 0, 1000); | |
485 | ||
486 | if (ret < 0) | |
487 | return ret; | |
488 | ||
489 | usb_reset_device(dev); | |
490 | ||
491 | /* return -EAGAIN, so the creation of an audio interface for this | |
492 | * temporary device is aborted. The device will reconnect with a | |
493 | * new product ID */ | |
494 | return -EAGAIN; | |
495 | } | |
496 | ||
e5779998 DM |
497 | /* |
498 | * Setup quirks | |
499 | */ | |
0f5733b0 GP |
500 | #define MAUDIO_SET 0x01 /* parse device_setup */ |
501 | #define MAUDIO_SET_COMPATIBLE 0x80 /* use only "win-compatible" interfaces */ | |
502 | #define MAUDIO_SET_DTS 0x02 /* enable DTS Digital Output */ | |
503 | #define MAUDIO_SET_96K 0x04 /* 48-96KHz rate if set, 8-48KHz otherwise */ | |
504 | #define MAUDIO_SET_24B 0x08 /* 24bits sample if set, 16bits otherwise */ | |
505 | #define MAUDIO_SET_DI 0x10 /* enable Digital Input */ | |
506 | #define MAUDIO_SET_MASK 0x1f /* bit mask for setup value */ | |
507 | #define MAUDIO_SET_24B_48K_DI 0x19 /* 24bits+48KHz+Digital Input */ | |
508 | #define MAUDIO_SET_24B_48K_NOTDI 0x09 /* 24bits+48KHz+No Digital Input */ | |
509 | #define MAUDIO_SET_16B_48K_DI 0x11 /* 16bits+48KHz+Digital Input */ | |
510 | #define MAUDIO_SET_16B_48K_NOTDI 0x01 /* 16bits+48KHz+No Digital Input */ | |
511 | ||
512 | static int quattro_skip_setting_quirk(struct snd_usb_audio *chip, | |
513 | int iface, int altno) | |
514 | { | |
515 | /* Reset ALL ifaces to 0 altsetting. | |
516 | * Call it for every possible altsetting of every interface. | |
517 | */ | |
518 | usb_set_interface(chip->dev, iface, 0); | |
519 | if (chip->setup & MAUDIO_SET) { | |
520 | if (chip->setup & MAUDIO_SET_COMPATIBLE) { | |
521 | if (iface != 1 && iface != 2) | |
522 | return 1; /* skip all interfaces but 1 and 2 */ | |
523 | } else { | |
524 | unsigned int mask; | |
525 | if (iface == 1 || iface == 2) | |
526 | return 1; /* skip interfaces 1 and 2 */ | |
527 | if ((chip->setup & MAUDIO_SET_96K) && altno != 1) | |
528 | return 1; /* skip this altsetting */ | |
529 | mask = chip->setup & MAUDIO_SET_MASK; | |
530 | if (mask == MAUDIO_SET_24B_48K_DI && altno != 2) | |
531 | return 1; /* skip this altsetting */ | |
532 | if (mask == MAUDIO_SET_24B_48K_NOTDI && altno != 3) | |
533 | return 1; /* skip this altsetting */ | |
534 | if (mask == MAUDIO_SET_16B_48K_NOTDI && altno != 4) | |
535 | return 1; /* skip this altsetting */ | |
536 | } | |
537 | } | |
538 | snd_printdd(KERN_INFO | |
539 | "using altsetting %d for interface %d config %d\n", | |
540 | altno, iface, chip->setup); | |
541 | return 0; /* keep this altsetting */ | |
542 | } | |
e5779998 DM |
543 | |
544 | static int audiophile_skip_setting_quirk(struct snd_usb_audio *chip, | |
545 | int iface, | |
546 | int altno) | |
547 | { | |
548 | /* Reset ALL ifaces to 0 altsetting. | |
549 | * Call it for every possible altsetting of every interface. | |
550 | */ | |
551 | usb_set_interface(chip->dev, iface, 0); | |
552 | ||
0f5733b0 GP |
553 | if (chip->setup & MAUDIO_SET) { |
554 | unsigned int mask; | |
555 | if ((chip->setup & MAUDIO_SET_DTS) && altno != 6) | |
e5779998 | 556 | return 1; /* skip this altsetting */ |
0f5733b0 | 557 | if ((chip->setup & MAUDIO_SET_96K) && altno != 1) |
e5779998 | 558 | return 1; /* skip this altsetting */ |
0f5733b0 GP |
559 | mask = chip->setup & MAUDIO_SET_MASK; |
560 | if (mask == MAUDIO_SET_24B_48K_DI && altno != 2) | |
e5779998 | 561 | return 1; /* skip this altsetting */ |
0f5733b0 | 562 | if (mask == MAUDIO_SET_24B_48K_NOTDI && altno != 3) |
e5779998 | 563 | return 1; /* skip this altsetting */ |
0f5733b0 | 564 | if (mask == MAUDIO_SET_16B_48K_DI && altno != 4) |
e5779998 | 565 | return 1; /* skip this altsetting */ |
0f5733b0 | 566 | if (mask == MAUDIO_SET_16B_48K_NOTDI && altno != 5) |
e5779998 DM |
567 | return 1; /* skip this altsetting */ |
568 | } | |
569 | ||
570 | return 0; /* keep this altsetting */ | |
571 | } | |
572 | ||
0f5733b0 GP |
573 | |
574 | static int fasttrackpro_skip_setting_quirk(struct snd_usb_audio *chip, | |
575 | int iface, int altno) | |
576 | { | |
577 | /* Reset ALL ifaces to 0 altsetting. | |
578 | * Call it for every possible altsetting of every interface. | |
579 | */ | |
580 | usb_set_interface(chip->dev, iface, 0); | |
581 | ||
582 | /* possible configuration where both inputs and only one output is | |
583 | *used is not supported by the current setup | |
584 | */ | |
585 | if (chip->setup & (MAUDIO_SET | MAUDIO_SET_24B)) { | |
586 | if (chip->setup & MAUDIO_SET_96K) { | |
587 | if (altno != 3 && altno != 6) | |
588 | return 1; | |
589 | } else if (chip->setup & MAUDIO_SET_DI) { | |
590 | if (iface == 4) | |
591 | return 1; /* no analog input */ | |
592 | if (altno != 2 && altno != 5) | |
593 | return 1; /* enable only altsets 2 and 5 */ | |
594 | } else { | |
595 | if (iface == 5) | |
596 | return 1; /* disable digialt input */ | |
597 | if (altno != 2 && altno != 5) | |
598 | return 1; /* enalbe only altsets 2 and 5 */ | |
599 | } | |
600 | } else { | |
601 | /* keep only 16-Bit mode */ | |
602 | if (altno != 1) | |
603 | return 1; | |
604 | } | |
605 | ||
606 | snd_printdd(KERN_INFO | |
607 | "using altsetting %d for interface %d config %d\n", | |
608 | altno, iface, chip->setup); | |
609 | return 0; /* keep this altsetting */ | |
610 | } | |
611 | ||
e5779998 DM |
612 | int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip, |
613 | int iface, | |
614 | int altno) | |
615 | { | |
616 | /* audiophile usb: skip altsets incompatible with device_setup */ | |
617 | if (chip->usb_id == USB_ID(0x0763, 0x2003)) | |
618 | return audiophile_skip_setting_quirk(chip, iface, altno); | |
0f5733b0 GP |
619 | /* quattro usb: skip altsets incompatible with device_setup */ |
620 | if (chip->usb_id == USB_ID(0x0763, 0x2001)) | |
621 | return quattro_skip_setting_quirk(chip, iface, altno); | |
622 | /* fasttrackpro usb: skip altsets incompatible with device_setup */ | |
623 | if (chip->usb_id == USB_ID(0x0763, 0x2012)) | |
624 | return fasttrackpro_skip_setting_quirk(chip, iface, altno); | |
e5779998 DM |
625 | |
626 | return 0; | |
627 | } | |
628 | ||
629 | int snd_usb_apply_boot_quirk(struct usb_device *dev, | |
630 | struct usb_interface *intf, | |
631 | const struct snd_usb_audio_quirk *quirk) | |
632 | { | |
633 | u32 id = USB_ID(le16_to_cpu(dev->descriptor.idVendor), | |
634 | le16_to_cpu(dev->descriptor.idProduct)); | |
635 | ||
3347b26c DM |
636 | switch (id) { |
637 | case USB_ID(0x041e, 0x3000): | |
638 | /* SB Extigy needs special boot-up sequence */ | |
639 | /* if more models come, this will go to the quirk list. */ | |
e5779998 DM |
640 | return snd_usb_extigy_boot_quirk(dev, intf); |
641 | ||
3347b26c DM |
642 | case USB_ID(0x041e, 0x3020): |
643 | /* SB Audigy 2 NX needs its own boot-up magic, too */ | |
e5779998 DM |
644 | return snd_usb_audigy2nx_boot_quirk(dev); |
645 | ||
3347b26c DM |
646 | case USB_ID(0x10f5, 0x0200): |
647 | /* C-Media CM106 / Turtle Beach Audio Advantage Roadie */ | |
e5779998 DM |
648 | return snd_usb_cm106_boot_quirk(dev); |
649 | ||
3347b26c DM |
650 | case USB_ID(0x0d8c, 0x0102): |
651 | /* C-Media CM6206 / CM106-Like Sound Device */ | |
8129e79e | 652 | case USB_ID(0x0ccd, 0x00b1): /* Terratec Aureon 7.1 USB */ |
e5779998 DM |
653 | return snd_usb_cm6206_boot_quirk(dev); |
654 | ||
3347b26c DM |
655 | case USB_ID(0x133e, 0x0815): |
656 | /* Access Music VirusTI Desktop */ | |
e5779998 DM |
657 | return snd_usb_accessmusic_boot_quirk(dev); |
658 | ||
759e890f | 659 | case USB_ID(0x17cc, 0x1000): /* Komplete Audio 6 */ |
3347b26c DM |
660 | case USB_ID(0x17cc, 0x1010): /* Traktor Audio 6 */ |
661 | case USB_ID(0x17cc, 0x1020): /* Traktor Audio 10 */ | |
54a8c500 | 662 | return snd_usb_nativeinstruments_boot_quirk(dev); |
0f5733b0 GP |
663 | case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro USB */ |
664 | return snd_usb_fasttrackpro_boot_quirk(dev); | |
3347b26c | 665 | } |
54a8c500 | 666 | |
e5779998 DM |
667 | return 0; |
668 | } | |
669 | ||
670 | /* | |
671 | * check if the device uses big-endian samples | |
672 | */ | |
673 | int snd_usb_is_big_endian_format(struct snd_usb_audio *chip, struct audioformat *fp) | |
674 | { | |
0f5733b0 | 675 | /* it depends on altsetting wether the device is big-endian or not */ |
e5779998 DM |
676 | switch (chip->usb_id) { |
677 | case USB_ID(0x0763, 0x2001): /* M-Audio Quattro: captured data only */ | |
0f5733b0 GP |
678 | if (fp->altsetting == 2 || fp->altsetting == 3 || |
679 | fp->altsetting == 5 || fp->altsetting == 6) | |
e5779998 DM |
680 | return 1; |
681 | break; | |
682 | case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */ | |
683 | if (chip->setup == 0x00 || | |
0f5733b0 GP |
684 | fp->altsetting == 1 || fp->altsetting == 2 || |
685 | fp->altsetting == 3) | |
686 | return 1; | |
687 | break; | |
688 | case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro */ | |
689 | if (fp->altsetting == 2 || fp->altsetting == 3 || | |
690 | fp->altsetting == 5 || fp->altsetting == 6) | |
e5779998 | 691 | return 1; |
0f5733b0 | 692 | break; |
e5779998 DM |
693 | } |
694 | return 0; | |
695 | } | |
696 | ||
697 | /* | |
1cdfa9f3 | 698 | * For E-Mu 0404USB/0202USB/TrackerPre/0204 sample rate should be set for device, |
e5779998 DM |
699 | * not for interface. |
700 | */ | |
701 | ||
702 | enum { | |
703 | EMU_QUIRK_SR_44100HZ = 0, | |
704 | EMU_QUIRK_SR_48000HZ, | |
705 | EMU_QUIRK_SR_88200HZ, | |
706 | EMU_QUIRK_SR_96000HZ, | |
707 | EMU_QUIRK_SR_176400HZ, | |
708 | EMU_QUIRK_SR_192000HZ | |
709 | }; | |
710 | ||
711 | static void set_format_emu_quirk(struct snd_usb_substream *subs, | |
712 | struct audioformat *fmt) | |
713 | { | |
714 | unsigned char emu_samplerate_id = 0; | |
715 | ||
716 | /* When capture is active | |
717 | * sample rate shouldn't be changed | |
718 | * by playback substream | |
719 | */ | |
720 | if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) { | |
721 | if (subs->stream->substream[SNDRV_PCM_STREAM_CAPTURE].interface != -1) | |
722 | return; | |
723 | } | |
724 | ||
725 | switch (fmt->rate_min) { | |
726 | case 48000: | |
727 | emu_samplerate_id = EMU_QUIRK_SR_48000HZ; | |
728 | break; | |
729 | case 88200: | |
730 | emu_samplerate_id = EMU_QUIRK_SR_88200HZ; | |
731 | break; | |
732 | case 96000: | |
733 | emu_samplerate_id = EMU_QUIRK_SR_96000HZ; | |
734 | break; | |
735 | case 176400: | |
736 | emu_samplerate_id = EMU_QUIRK_SR_176400HZ; | |
737 | break; | |
738 | case 192000: | |
739 | emu_samplerate_id = EMU_QUIRK_SR_192000HZ; | |
740 | break; | |
741 | default: | |
742 | emu_samplerate_id = EMU_QUIRK_SR_44100HZ; | |
743 | break; | |
744 | } | |
745 | snd_emuusb_set_samplerate(subs->stream->chip, emu_samplerate_id); | |
746 | } | |
747 | ||
748 | void snd_usb_set_format_quirk(struct snd_usb_substream *subs, | |
749 | struct audioformat *fmt) | |
750 | { | |
751 | switch (subs->stream->chip->usb_id) { | |
752 | case USB_ID(0x041e, 0x3f02): /* E-Mu 0202 USB */ | |
753 | case USB_ID(0x041e, 0x3f04): /* E-Mu 0404 USB */ | |
754 | case USB_ID(0x041e, 0x3f0a): /* E-Mu Tracker Pre */ | |
1cdfa9f3 | 755 | case USB_ID(0x041e, 0x3f19): /* E-Mu 0204 USB */ |
e5779998 DM |
756 | set_format_emu_quirk(subs, fmt); |
757 | break; | |
758 | } | |
759 | } | |
760 |