]>
Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
bd4f36d6 MM |
2 | * Disk Array driver for HP Smart Array controllers. |
3 | * (C) Copyright 2000, 2007 Hewlett-Packard Development Company, L.P. | |
1da177e4 LT |
4 | * |
5 | * This program is free software; you can redistribute it and/or modify | |
6 | * it under the terms of the GNU General Public License as published by | |
bd4f36d6 | 7 | * the Free Software Foundation; version 2 of the License. |
1da177e4 LT |
8 | * |
9 | * This program is distributed in the hope that it will be useful, | |
10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
bd4f36d6 MM |
11 | * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
12 | * General Public License for more details. | |
1da177e4 LT |
13 | * |
14 | * You should have received a copy of the GNU General Public License | |
15 | * along with this program; if not, write to the Free Software | |
bd4f36d6 MM |
16 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA |
17 | * 02111-1307, USA. | |
1da177e4 LT |
18 | * |
19 | * Questions/Comments/Bugfixes to [email protected] | |
20 | * | |
21 | */ | |
22 | ||
1da177e4 LT |
23 | #include <linux/module.h> |
24 | #include <linux/interrupt.h> | |
25 | #include <linux/types.h> | |
26 | #include <linux/pci.h> | |
27 | #include <linux/kernel.h> | |
28 | #include <linux/slab.h> | |
405f5571 | 29 | #include <linux/smp_lock.h> |
1da177e4 LT |
30 | #include <linux/delay.h> |
31 | #include <linux/major.h> | |
32 | #include <linux/fs.h> | |
33 | #include <linux/bio.h> | |
34 | #include <linux/blkpg.h> | |
35 | #include <linux/timer.h> | |
36 | #include <linux/proc_fs.h> | |
89b6e743 | 37 | #include <linux/seq_file.h> |
7c832835 | 38 | #include <linux/init.h> |
4d761609 | 39 | #include <linux/jiffies.h> |
1da177e4 LT |
40 | #include <linux/hdreg.h> |
41 | #include <linux/spinlock.h> | |
42 | #include <linux/compat.h> | |
b368c9dd | 43 | #include <linux/mutex.h> |
1da177e4 LT |
44 | #include <asm/uaccess.h> |
45 | #include <asm/io.h> | |
46 | ||
eb0df996 | 47 | #include <linux/dma-mapping.h> |
1da177e4 LT |
48 | #include <linux/blkdev.h> |
49 | #include <linux/genhd.h> | |
50 | #include <linux/completion.h> | |
d5d3b736 | 51 | #include <scsi/scsi.h> |
03bbfee5 MMOD |
52 | #include <scsi/sg.h> |
53 | #include <scsi/scsi_ioctl.h> | |
54 | #include <linux/cdrom.h> | |
231bc2a2 | 55 | #include <linux/scatterlist.h> |
0a9279cc | 56 | #include <linux/kthread.h> |
1da177e4 LT |
57 | |
58 | #define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin)) | |
24aac480 MM |
59 | #define DRIVER_NAME "HP CISS Driver (v 3.6.20)" |
60 | #define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 20) | |
1da177e4 LT |
61 | |
62 | /* Embedded module documentation macros - see modules.h */ | |
63 | MODULE_AUTHOR("Hewlett-Packard Company"); | |
24aac480 | 64 | MODULE_DESCRIPTION("Driver for HP Smart Array Controllers"); |
1da177e4 | 65 | MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400" |
24aac480 MM |
66 | " SA6i P600 P800 P400 P400i E200 E200i E500 P700m" |
67 | " Smart Array G2 Series SAS/SATA Controllers"); | |
68 | MODULE_VERSION("3.6.20"); | |
1da177e4 LT |
69 | MODULE_LICENSE("GPL"); |
70 | ||
71 | #include "cciss_cmd.h" | |
72 | #include "cciss.h" | |
73 | #include <linux/cciss_ioctl.h> | |
74 | ||
75 | /* define the PCI info for the cards we can control */ | |
76 | static const struct pci_device_id cciss_pci_device_id[] = { | |
f82ccdb9 BH |
77 | {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISS, 0x0E11, 0x4070}, |
78 | {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, 0x0E11, 0x4080}, | |
79 | {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, 0x0E11, 0x4082}, | |
80 | {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, 0x0E11, 0x4083}, | |
81 | {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x4091}, | |
82 | {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409A}, | |
83 | {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409B}, | |
84 | {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409C}, | |
85 | {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409D}, | |
86 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSA, 0x103C, 0x3225}, | |
87 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3223}, | |
88 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3234}, | |
89 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3235}, | |
90 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3211}, | |
91 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3212}, | |
92 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3213}, | |
93 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3214}, | |
94 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3215}, | |
de923916 | 95 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3237}, |
9cff3b38 | 96 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D}, |
24aac480 MM |
97 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241}, |
98 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243}, | |
99 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245}, | |
100 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247}, | |
101 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249}, | |
77ca7286 MM |
102 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324A}, |
103 | {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324B}, | |
4ff9a9a4 MM |
104 | {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, |
105 | PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0}, | |
1da177e4 LT |
106 | {0,} |
107 | }; | |
7c832835 | 108 | |
1da177e4 LT |
109 | MODULE_DEVICE_TABLE(pci, cciss_pci_device_id); |
110 | ||
1da177e4 LT |
111 | /* board_id = Subsystem Device ID & Vendor ID |
112 | * product = Marketing Name for the board | |
7c832835 | 113 | * access = Address of the struct of function pointers |
1da177e4 LT |
114 | */ |
115 | static struct board_type products[] = { | |
49153998 MM |
116 | {0x40700E11, "Smart Array 5300", &SA5_access}, |
117 | {0x40800E11, "Smart Array 5i", &SA5B_access}, | |
118 | {0x40820E11, "Smart Array 532", &SA5B_access}, | |
119 | {0x40830E11, "Smart Array 5312", &SA5B_access}, | |
120 | {0x409A0E11, "Smart Array 641", &SA5_access}, | |
121 | {0x409B0E11, "Smart Array 642", &SA5_access}, | |
122 | {0x409C0E11, "Smart Array 6400", &SA5_access}, | |
123 | {0x409D0E11, "Smart Array 6400 EM", &SA5_access}, | |
124 | {0x40910E11, "Smart Array 6i", &SA5_access}, | |
125 | {0x3225103C, "Smart Array P600", &SA5_access}, | |
126 | {0x3223103C, "Smart Array P800", &SA5_access}, | |
127 | {0x3234103C, "Smart Array P400", &SA5_access}, | |
128 | {0x3235103C, "Smart Array P400i", &SA5_access}, | |
129 | {0x3211103C, "Smart Array E200i", &SA5_access}, | |
130 | {0x3212103C, "Smart Array E200", &SA5_access}, | |
131 | {0x3213103C, "Smart Array E200i", &SA5_access}, | |
132 | {0x3214103C, "Smart Array E200i", &SA5_access}, | |
133 | {0x3215103C, "Smart Array E200i", &SA5_access}, | |
134 | {0x3237103C, "Smart Array E500", &SA5_access}, | |
135 | {0x323D103C, "Smart Array P700m", &SA5_access}, | |
136 | {0x3241103C, "Smart Array P212", &SA5_access}, | |
137 | {0x3243103C, "Smart Array P410", &SA5_access}, | |
138 | {0x3245103C, "Smart Array P410i", &SA5_access}, | |
139 | {0x3247103C, "Smart Array P411", &SA5_access}, | |
140 | {0x3249103C, "Smart Array P812", &SA5_access}, | |
77ca7286 MM |
141 | {0x324A103C, "Smart Array P712m", &SA5_access}, |
142 | {0x324B103C, "Smart Array P711m", &SA5_access}, | |
49153998 | 143 | {0xFFFF103C, "Unknown Smart Array", &SA5_access}, |
1da177e4 LT |
144 | }; |
145 | ||
d14c4ab5 | 146 | /* How long to wait (in milliseconds) for board to go into simple mode */ |
7c832835 | 147 | #define MAX_CONFIG_WAIT 30000 |
1da177e4 LT |
148 | #define MAX_IOCTL_CONFIG_WAIT 1000 |
149 | ||
150 | /*define how many times we will try a command because of bus resets */ | |
151 | #define MAX_CMD_RETRIES 3 | |
152 | ||
1da177e4 LT |
153 | #define MAX_CTLR 32 |
154 | ||
155 | /* Originally cciss driver only supports 8 major numbers */ | |
156 | #define MAX_CTLR_ORIG 8 | |
157 | ||
1da177e4 LT |
158 | static ctlr_info_t *hba[MAX_CTLR]; |
159 | ||
b368c9dd AP |
160 | static struct task_struct *cciss_scan_thread; |
161 | static DEFINE_MUTEX(scan_mutex); | |
162 | static LIST_HEAD(scan_q); | |
163 | ||
165125e1 | 164 | static void do_cciss_request(struct request_queue *q); |
7d12e780 | 165 | static irqreturn_t do_cciss_intr(int irq, void *dev_id); |
ef7822c2 AV |
166 | static int cciss_open(struct block_device *bdev, fmode_t mode); |
167 | static int cciss_release(struct gendisk *disk, fmode_t mode); | |
168 | static int cciss_ioctl(struct block_device *bdev, fmode_t mode, | |
7c832835 | 169 | unsigned int cmd, unsigned long arg); |
a885c8c4 | 170 | static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo); |
1da177e4 | 171 | |
1da177e4 | 172 | static int cciss_revalidate(struct gendisk *disk); |
2d11d993 | 173 | static int rebuild_lun_table(ctlr_info_t *h, int first_time, int via_ioctl); |
a0ea8622 | 174 | static int deregister_disk(ctlr_info_t *h, int drv_index, |
2d11d993 | 175 | int clear_all, int via_ioctl); |
1da177e4 | 176 | |
00988a35 MMOD |
177 | static void cciss_read_capacity(int ctlr, int logvol, int withirq, |
178 | sector_t *total_size, unsigned int *block_size); | |
179 | static void cciss_read_capacity_16(int ctlr, int logvol, int withirq, | |
180 | sector_t *total_size, unsigned int *block_size); | |
181 | static void cciss_geometry_inquiry(int ctlr, int logvol, | |
182 | int withirq, sector_t total_size, | |
183 | unsigned int block_size, InquiryData_struct *inq_buff, | |
7c832835 | 184 | drive_info_struct *drv); |
7c832835 BH |
185 | static void __devinit cciss_interrupt_mode(ctlr_info_t *, struct pci_dev *, |
186 | __u32); | |
187 | static void start_io(ctlr_info_t *h); | |
188 | static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, | |
7c832835 BH |
189 | __u8 page_code, unsigned char *scsi3addr, int cmd_type); |
190 | static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size, | |
b57695fe | 191 | __u8 page_code, unsigned char scsi3addr[], |
192 | int cmd_type); | |
85cc61ae | 193 | static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c, |
194 | int attempt_retry); | |
195 | static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c); | |
1da177e4 | 196 | |
33079b21 | 197 | static void fail_all_cmds(unsigned long ctlr); |
d6f4965d | 198 | static int add_to_scan_list(struct ctlr_info *h); |
0a9279cc MM |
199 | static int scan_thread(void *data); |
200 | static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c); | |
617e1344 SC |
201 | static void cciss_hba_release(struct device *dev); |
202 | static void cciss_device_release(struct device *dev); | |
361e9b07 | 203 | static void cciss_free_gendisk(ctlr_info_t *h, int drv_index); |
33079b21 | 204 | |
1da177e4 | 205 | #ifdef CONFIG_PROC_FS |
1da177e4 LT |
206 | static void cciss_procinit(int i); |
207 | #else | |
7c832835 BH |
208 | static void cciss_procinit(int i) |
209 | { | |
210 | } | |
211 | #endif /* CONFIG_PROC_FS */ | |
1da177e4 LT |
212 | |
213 | #ifdef CONFIG_COMPAT | |
ef7822c2 AV |
214 | static int cciss_compat_ioctl(struct block_device *, fmode_t, |
215 | unsigned, unsigned long); | |
1da177e4 LT |
216 | #endif |
217 | ||
83d5cde4 | 218 | static const struct block_device_operations cciss_fops = { |
7c832835 | 219 | .owner = THIS_MODULE, |
ef7822c2 AV |
220 | .open = cciss_open, |
221 | .release = cciss_release, | |
222 | .locked_ioctl = cciss_ioctl, | |
7c832835 | 223 | .getgeo = cciss_getgeo, |
1da177e4 | 224 | #ifdef CONFIG_COMPAT |
ef7822c2 | 225 | .compat_ioctl = cciss_compat_ioctl, |
1da177e4 | 226 | #endif |
7c832835 | 227 | .revalidate_disk = cciss_revalidate, |
1da177e4 LT |
228 | }; |
229 | ||
230 | /* | |
231 | * Enqueuing and dequeuing functions for cmdlists. | |
232 | */ | |
8a3173de | 233 | static inline void addQ(struct hlist_head *list, CommandList_struct *c) |
1da177e4 | 234 | { |
8a3173de | 235 | hlist_add_head(&c->list, list); |
1da177e4 LT |
236 | } |
237 | ||
8a3173de | 238 | static inline void removeQ(CommandList_struct *c) |
1da177e4 | 239 | { |
b59e64d0 HR |
240 | /* |
241 | * After kexec/dump some commands might still | |
242 | * be in flight, which the firmware will try | |
243 | * to complete. Resetting the firmware doesn't work | |
244 | * with old fw revisions, so we have to mark | |
245 | * them off as 'stale' to prevent the driver from | |
246 | * falling over. | |
247 | */ | |
248 | if (WARN_ON(hlist_unhashed(&c->list))) { | |
249 | c->cmd_type = CMD_MSG_STALE; | |
8a3173de | 250 | return; |
b59e64d0 | 251 | } |
8a3173de JA |
252 | |
253 | hlist_del_init(&c->list); | |
1da177e4 LT |
254 | } |
255 | ||
256 | #include "cciss_scsi.c" /* For SCSI tape support */ | |
257 | ||
0f5486ec RD |
258 | #define RAID_UNKNOWN 6 |
259 | ||
1da177e4 LT |
260 | #ifdef CONFIG_PROC_FS |
261 | ||
262 | /* | |
263 | * Report information about this controller. | |
264 | */ | |
265 | #define ENG_GIG 1000000000 | |
266 | #define ENG_GIG_FACTOR (ENG_GIG/512) | |
89b6e743 | 267 | #define ENGAGE_SCSI "engage scsi" |
7c832835 BH |
268 | static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG", |
269 | "UNKNOWN" | |
270 | }; | |
1da177e4 LT |
271 | |
272 | static struct proc_dir_entry *proc_cciss; | |
273 | ||
89b6e743 | 274 | static void cciss_seq_show_header(struct seq_file *seq) |
1da177e4 | 275 | { |
89b6e743 MM |
276 | ctlr_info_t *h = seq->private; |
277 | ||
278 | seq_printf(seq, "%s: HP %s Controller\n" | |
279 | "Board ID: 0x%08lx\n" | |
280 | "Firmware Version: %c%c%c%c\n" | |
281 | "IRQ: %d\n" | |
282 | "Logical drives: %d\n" | |
283 | "Current Q depth: %d\n" | |
284 | "Current # commands on controller: %d\n" | |
285 | "Max Q depth since init: %d\n" | |
286 | "Max # commands on controller since init: %d\n" | |
287 | "Max SG entries since init: %d\n", | |
288 | h->devname, | |
289 | h->product_name, | |
290 | (unsigned long)h->board_id, | |
291 | h->firm_ver[0], h->firm_ver[1], h->firm_ver[2], | |
292 | h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT], | |
293 | h->num_luns, | |
294 | h->Qdepth, h->commands_outstanding, | |
295 | h->maxQsinceinit, h->max_outstanding, h->maxSG); | |
296 | ||
297 | #ifdef CONFIG_CISS_SCSI_TAPE | |
298 | cciss_seq_tape_report(seq, h->ctlr); | |
299 | #endif /* CONFIG_CISS_SCSI_TAPE */ | |
300 | } | |
1da177e4 | 301 | |
89b6e743 MM |
302 | static void *cciss_seq_start(struct seq_file *seq, loff_t *pos) |
303 | { | |
304 | ctlr_info_t *h = seq->private; | |
305 | unsigned ctlr = h->ctlr; | |
306 | unsigned long flags; | |
1da177e4 LT |
307 | |
308 | /* prevent displaying bogus info during configuration | |
309 | * or deconfiguration of a logical volume | |
310 | */ | |
311 | spin_lock_irqsave(CCISS_LOCK(ctlr), flags); | |
312 | if (h->busy_configuring) { | |
313 | spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); | |
89b6e743 | 314 | return ERR_PTR(-EBUSY); |
1da177e4 LT |
315 | } |
316 | h->busy_configuring = 1; | |
317 | spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); | |
318 | ||
89b6e743 MM |
319 | if (*pos == 0) |
320 | cciss_seq_show_header(seq); | |
321 | ||
322 | return pos; | |
323 | } | |
324 | ||
325 | static int cciss_seq_show(struct seq_file *seq, void *v) | |
326 | { | |
327 | sector_t vol_sz, vol_sz_frac; | |
328 | ctlr_info_t *h = seq->private; | |
329 | unsigned ctlr = h->ctlr; | |
330 | loff_t *pos = v; | |
331 | drive_info_struct *drv = &h->drv[*pos]; | |
332 | ||
333 | if (*pos > h->highest_lun) | |
334 | return 0; | |
335 | ||
336 | if (drv->heads == 0) | |
337 | return 0; | |
338 | ||
339 | vol_sz = drv->nr_blocks; | |
340 | vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR); | |
341 | vol_sz_frac *= 100; | |
342 | sector_div(vol_sz_frac, ENG_GIG_FACTOR); | |
343 | ||
344 | if (drv->raid_level > 5) | |
345 | drv->raid_level = RAID_UNKNOWN; | |
346 | seq_printf(seq, "cciss/c%dd%d:" | |
347 | "\t%4u.%02uGB\tRAID %s\n", | |
348 | ctlr, (int) *pos, (int)vol_sz, (int)vol_sz_frac, | |
349 | raid_label[drv->raid_level]); | |
350 | return 0; | |
351 | } | |
352 | ||
353 | static void *cciss_seq_next(struct seq_file *seq, void *v, loff_t *pos) | |
354 | { | |
355 | ctlr_info_t *h = seq->private; | |
356 | ||
357 | if (*pos > h->highest_lun) | |
358 | return NULL; | |
359 | *pos += 1; | |
360 | ||
361 | return pos; | |
362 | } | |
363 | ||
364 | static void cciss_seq_stop(struct seq_file *seq, void *v) | |
365 | { | |
366 | ctlr_info_t *h = seq->private; | |
367 | ||
368 | /* Only reset h->busy_configuring if we succeeded in setting | |
369 | * it during cciss_seq_start. */ | |
370 | if (v == ERR_PTR(-EBUSY)) | |
371 | return; | |
7c832835 | 372 | |
1da177e4 | 373 | h->busy_configuring = 0; |
1da177e4 LT |
374 | } |
375 | ||
88e9d34c | 376 | static const struct seq_operations cciss_seq_ops = { |
89b6e743 MM |
377 | .start = cciss_seq_start, |
378 | .show = cciss_seq_show, | |
379 | .next = cciss_seq_next, | |
380 | .stop = cciss_seq_stop, | |
381 | }; | |
382 | ||
383 | static int cciss_seq_open(struct inode *inode, struct file *file) | |
384 | { | |
385 | int ret = seq_open(file, &cciss_seq_ops); | |
386 | struct seq_file *seq = file->private_data; | |
387 | ||
388 | if (!ret) | |
389 | seq->private = PDE(inode)->data; | |
390 | ||
391 | return ret; | |
392 | } | |
393 | ||
394 | static ssize_t | |
395 | cciss_proc_write(struct file *file, const char __user *buf, | |
396 | size_t length, loff_t *ppos) | |
1da177e4 | 397 | { |
89b6e743 MM |
398 | int err; |
399 | char *buffer; | |
400 | ||
401 | #ifndef CONFIG_CISS_SCSI_TAPE | |
402 | return -EINVAL; | |
1da177e4 LT |
403 | #endif |
404 | ||
89b6e743 | 405 | if (!buf || length > PAGE_SIZE - 1) |
7c832835 | 406 | return -EINVAL; |
89b6e743 MM |
407 | |
408 | buffer = (char *)__get_free_page(GFP_KERNEL); | |
409 | if (!buffer) | |
410 | return -ENOMEM; | |
411 | ||
412 | err = -EFAULT; | |
413 | if (copy_from_user(buffer, buf, length)) | |
414 | goto out; | |
415 | buffer[length] = '\0'; | |
416 | ||
417 | #ifdef CONFIG_CISS_SCSI_TAPE | |
418 | if (strncmp(ENGAGE_SCSI, buffer, sizeof ENGAGE_SCSI - 1) == 0) { | |
419 | struct seq_file *seq = file->private_data; | |
420 | ctlr_info_t *h = seq->private; | |
421 | int rc; | |
422 | ||
7c832835 BH |
423 | rc = cciss_engage_scsi(h->ctlr); |
424 | if (rc != 0) | |
89b6e743 MM |
425 | err = -rc; |
426 | else | |
427 | err = length; | |
428 | } else | |
429 | #endif /* CONFIG_CISS_SCSI_TAPE */ | |
430 | err = -EINVAL; | |
7c832835 BH |
431 | /* might be nice to have "disengage" too, but it's not |
432 | safely possible. (only 1 module use count, lock issues.) */ | |
89b6e743 MM |
433 | |
434 | out: | |
435 | free_page((unsigned long)buffer); | |
436 | return err; | |
1da177e4 LT |
437 | } |
438 | ||
89b6e743 MM |
439 | static struct file_operations cciss_proc_fops = { |
440 | .owner = THIS_MODULE, | |
441 | .open = cciss_seq_open, | |
442 | .read = seq_read, | |
443 | .llseek = seq_lseek, | |
444 | .release = seq_release, | |
445 | .write = cciss_proc_write, | |
446 | }; | |
447 | ||
1da177e4 LT |
448 | static void __devinit cciss_procinit(int i) |
449 | { | |
450 | struct proc_dir_entry *pde; | |
451 | ||
89b6e743 | 452 | if (proc_cciss == NULL) |
928b4d8c | 453 | proc_cciss = proc_mkdir("driver/cciss", NULL); |
89b6e743 MM |
454 | if (!proc_cciss) |
455 | return; | |
3dfcf9c4 | 456 | pde = proc_create_data(hba[i]->devname, S_IWUSR | S_IRUSR | S_IRGRP | |
89b6e743 | 457 | S_IROTH, proc_cciss, |
3dfcf9c4 | 458 | &cciss_proc_fops, hba[i]); |
1da177e4 | 459 | } |
7c832835 | 460 | #endif /* CONFIG_PROC_FS */ |
1da177e4 | 461 | |
7fe06326 AP |
462 | #define MAX_PRODUCT_NAME_LEN 19 |
463 | ||
464 | #define to_hba(n) container_of(n, struct ctlr_info, dev) | |
7fe06326 | 465 | |
d6f4965d AP |
466 | static ssize_t host_store_rescan(struct device *dev, |
467 | struct device_attribute *attr, | |
468 | const char *buf, size_t count) | |
469 | { | |
470 | struct ctlr_info *h = to_hba(dev); | |
471 | ||
472 | add_to_scan_list(h); | |
473 | wake_up_process(cciss_scan_thread); | |
474 | wait_for_completion_interruptible(&h->scan_wait); | |
475 | ||
476 | return count; | |
477 | } | |
478 | DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan); | |
7fe06326 AP |
479 | |
480 | static ssize_t dev_show_unique_id(struct device *dev, | |
481 | struct device_attribute *attr, | |
482 | char *buf) | |
483 | { | |
617e1344 SC |
484 | drive_info_struct *drv = dev_get_drvdata(dev); |
485 | struct ctlr_info *h = to_hba(drv->dev->parent); | |
7fe06326 AP |
486 | __u8 sn[16]; |
487 | unsigned long flags; | |
488 | int ret = 0; | |
489 | ||
490 | spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); | |
491 | if (h->busy_configuring) | |
492 | ret = -EBUSY; | |
493 | else | |
494 | memcpy(sn, drv->serial_no, sizeof(sn)); | |
495 | spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); | |
496 | ||
497 | if (ret) | |
498 | return ret; | |
499 | else | |
500 | return snprintf(buf, 16 * 2 + 2, | |
501 | "%02X%02X%02X%02X%02X%02X%02X%02X" | |
502 | "%02X%02X%02X%02X%02X%02X%02X%02X\n", | |
503 | sn[0], sn[1], sn[2], sn[3], | |
504 | sn[4], sn[5], sn[6], sn[7], | |
505 | sn[8], sn[9], sn[10], sn[11], | |
506 | sn[12], sn[13], sn[14], sn[15]); | |
507 | } | |
508 | DEVICE_ATTR(unique_id, S_IRUGO, dev_show_unique_id, NULL); | |
509 | ||
510 | static ssize_t dev_show_vendor(struct device *dev, | |
511 | struct device_attribute *attr, | |
512 | char *buf) | |
513 | { | |
617e1344 SC |
514 | drive_info_struct *drv = dev_get_drvdata(dev); |
515 | struct ctlr_info *h = to_hba(drv->dev->parent); | |
7fe06326 AP |
516 | char vendor[VENDOR_LEN + 1]; |
517 | unsigned long flags; | |
518 | int ret = 0; | |
519 | ||
520 | spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); | |
521 | if (h->busy_configuring) | |
522 | ret = -EBUSY; | |
523 | else | |
524 | memcpy(vendor, drv->vendor, VENDOR_LEN + 1); | |
525 | spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); | |
526 | ||
527 | if (ret) | |
528 | return ret; | |
529 | else | |
530 | return snprintf(buf, sizeof(vendor) + 1, "%s\n", drv->vendor); | |
531 | } | |
532 | DEVICE_ATTR(vendor, S_IRUGO, dev_show_vendor, NULL); | |
533 | ||
534 | static ssize_t dev_show_model(struct device *dev, | |
535 | struct device_attribute *attr, | |
536 | char *buf) | |
537 | { | |
617e1344 SC |
538 | drive_info_struct *drv = dev_get_drvdata(dev); |
539 | struct ctlr_info *h = to_hba(drv->dev->parent); | |
7fe06326 AP |
540 | char model[MODEL_LEN + 1]; |
541 | unsigned long flags; | |
542 | int ret = 0; | |
543 | ||
544 | spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); | |
545 | if (h->busy_configuring) | |
546 | ret = -EBUSY; | |
547 | else | |
548 | memcpy(model, drv->model, MODEL_LEN + 1); | |
549 | spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); | |
550 | ||
551 | if (ret) | |
552 | return ret; | |
553 | else | |
554 | return snprintf(buf, sizeof(model) + 1, "%s\n", drv->model); | |
555 | } | |
556 | DEVICE_ATTR(model, S_IRUGO, dev_show_model, NULL); | |
557 | ||
558 | static ssize_t dev_show_rev(struct device *dev, | |
559 | struct device_attribute *attr, | |
560 | char *buf) | |
561 | { | |
617e1344 SC |
562 | drive_info_struct *drv = dev_get_drvdata(dev); |
563 | struct ctlr_info *h = to_hba(drv->dev->parent); | |
7fe06326 AP |
564 | char rev[REV_LEN + 1]; |
565 | unsigned long flags; | |
566 | int ret = 0; | |
567 | ||
568 | spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); | |
569 | if (h->busy_configuring) | |
570 | ret = -EBUSY; | |
571 | else | |
572 | memcpy(rev, drv->rev, REV_LEN + 1); | |
573 | spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); | |
574 | ||
575 | if (ret) | |
576 | return ret; | |
577 | else | |
578 | return snprintf(buf, sizeof(rev) + 1, "%s\n", drv->rev); | |
579 | } | |
580 | DEVICE_ATTR(rev, S_IRUGO, dev_show_rev, NULL); | |
581 | ||
d6f4965d AP |
582 | static struct attribute *cciss_host_attrs[] = { |
583 | &dev_attr_rescan.attr, | |
584 | NULL | |
585 | }; | |
586 | ||
587 | static struct attribute_group cciss_host_attr_group = { | |
588 | .attrs = cciss_host_attrs, | |
589 | }; | |
590 | ||
591 | static struct attribute_group *cciss_host_attr_groups[] = { | |
592 | &cciss_host_attr_group, | |
593 | NULL | |
594 | }; | |
595 | ||
596 | static struct device_type cciss_host_type = { | |
597 | .name = "cciss_host", | |
598 | .groups = cciss_host_attr_groups, | |
617e1344 | 599 | .release = cciss_hba_release, |
d6f4965d AP |
600 | }; |
601 | ||
7fe06326 AP |
602 | static struct attribute *cciss_dev_attrs[] = { |
603 | &dev_attr_unique_id.attr, | |
604 | &dev_attr_model.attr, | |
605 | &dev_attr_vendor.attr, | |
606 | &dev_attr_rev.attr, | |
607 | NULL | |
608 | }; | |
609 | ||
610 | static struct attribute_group cciss_dev_attr_group = { | |
611 | .attrs = cciss_dev_attrs, | |
612 | }; | |
613 | ||
a4dbd674 | 614 | static const struct attribute_group *cciss_dev_attr_groups[] = { |
7fe06326 AP |
615 | &cciss_dev_attr_group, |
616 | NULL | |
617 | }; | |
618 | ||
619 | static struct device_type cciss_dev_type = { | |
620 | .name = "cciss_device", | |
621 | .groups = cciss_dev_attr_groups, | |
617e1344 | 622 | .release = cciss_device_release, |
7fe06326 AP |
623 | }; |
624 | ||
625 | static struct bus_type cciss_bus_type = { | |
626 | .name = "cciss", | |
627 | }; | |
628 | ||
617e1344 SC |
629 | /* |
630 | * cciss_hba_release is called when the reference count | |
631 | * of h->dev goes to zero. | |
632 | */ | |
633 | static void cciss_hba_release(struct device *dev) | |
634 | { | |
635 | /* | |
636 | * nothing to do, but need this to avoid a warning | |
637 | * about not having a release handler from lib/kref.c. | |
638 | */ | |
639 | } | |
7fe06326 AP |
640 | |
641 | /* | |
642 | * Initialize sysfs entry for each controller. This sets up and registers | |
643 | * the 'cciss#' directory for each individual controller under | |
644 | * /sys/bus/pci/devices/<dev>/. | |
645 | */ | |
646 | static int cciss_create_hba_sysfs_entry(struct ctlr_info *h) | |
647 | { | |
648 | device_initialize(&h->dev); | |
649 | h->dev.type = &cciss_host_type; | |
650 | h->dev.bus = &cciss_bus_type; | |
651 | dev_set_name(&h->dev, "%s", h->devname); | |
652 | h->dev.parent = &h->pdev->dev; | |
653 | ||
654 | return device_add(&h->dev); | |
655 | } | |
656 | ||
657 | /* | |
658 | * Remove sysfs entries for an hba. | |
659 | */ | |
660 | static void cciss_destroy_hba_sysfs_entry(struct ctlr_info *h) | |
661 | { | |
662 | device_del(&h->dev); | |
617e1344 SC |
663 | put_device(&h->dev); /* final put. */ |
664 | } | |
665 | ||
666 | /* cciss_device_release is called when the reference count | |
667 | * of h->drv[x].dev goes to zero. | |
668 | */ | |
669 | static void cciss_device_release(struct device *dev) | |
670 | { | |
671 | kfree(dev); | |
7fe06326 AP |
672 | } |
673 | ||
674 | /* | |
675 | * Initialize sysfs for each logical drive. This sets up and registers | |
676 | * the 'c#d#' directory for each individual logical drive under | |
677 | * /sys/bus/pci/devices/<dev/ccis#/. We also create a link from | |
678 | * /sys/block/cciss!c#d# to this entry. | |
679 | */ | |
617e1344 | 680 | static long cciss_create_ld_sysfs_entry(struct ctlr_info *h, |
7fe06326 AP |
681 | int drv_index) |
682 | { | |
617e1344 SC |
683 | struct device *dev; |
684 | ||
8ce51966 SC |
685 | /* Special case for c*d0, we only create it once. */ |
686 | if (drv_index == 0 && h->drv[drv_index].dev != NULL) | |
687 | return 0; | |
688 | ||
617e1344 SC |
689 | dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
690 | if (!dev) | |
691 | return -ENOMEM; | |
692 | device_initialize(dev); | |
693 | dev->type = &cciss_dev_type; | |
694 | dev->bus = &cciss_bus_type; | |
695 | dev_set_name(dev, "c%dd%d", h->ctlr, drv_index); | |
696 | dev->parent = &h->dev; | |
697 | h->drv[drv_index].dev = dev; | |
698 | dev_set_drvdata(dev, &h->drv[drv_index]); | |
699 | return device_add(dev); | |
7fe06326 AP |
700 | } |
701 | ||
702 | /* | |
703 | * Remove sysfs entries for a logical drive. | |
704 | */ | |
8ce51966 SC |
705 | static void cciss_destroy_ld_sysfs_entry(struct ctlr_info *h, int drv_index, |
706 | int ctlr_exiting) | |
7fe06326 | 707 | { |
617e1344 | 708 | struct device *dev = h->drv[drv_index].dev; |
8ce51966 SC |
709 | |
710 | /* special case for c*d0, we only destroy it on controller exit */ | |
711 | if (drv_index == 0 && !ctlr_exiting) | |
712 | return; | |
713 | ||
617e1344 SC |
714 | device_del(dev); |
715 | put_device(dev); /* the "final" put. */ | |
716 | h->drv[drv_index].dev = NULL; | |
7fe06326 AP |
717 | } |
718 | ||
7c832835 BH |
719 | /* |
720 | * For operations that cannot sleep, a command block is allocated at init, | |
1da177e4 | 721 | * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track |
7c832835 BH |
722 | * which ones are free or in use. For operations that can wait for kmalloc |
723 | * to possible sleep, this routine can be called with get_from_pool set to 0. | |
724 | * cmd_free() MUST be called with a got_from_pool set to 0 if cmd_alloc was. | |
725 | */ | |
726 | static CommandList_struct *cmd_alloc(ctlr_info_t *h, int get_from_pool) | |
1da177e4 LT |
727 | { |
728 | CommandList_struct *c; | |
7c832835 | 729 | int i; |
1da177e4 LT |
730 | u64bit temp64; |
731 | dma_addr_t cmd_dma_handle, err_dma_handle; | |
732 | ||
7c832835 BH |
733 | if (!get_from_pool) { |
734 | c = (CommandList_struct *) pci_alloc_consistent(h->pdev, | |
735 | sizeof(CommandList_struct), &cmd_dma_handle); | |
736 | if (c == NULL) | |
737 | return NULL; | |
1da177e4 LT |
738 | memset(c, 0, sizeof(CommandList_struct)); |
739 | ||
33079b21 MM |
740 | c->cmdindex = -1; |
741 | ||
7c832835 BH |
742 | c->err_info = (ErrorInfo_struct *) |
743 | pci_alloc_consistent(h->pdev, sizeof(ErrorInfo_struct), | |
744 | &err_dma_handle); | |
745 | ||
746 | if (c->err_info == NULL) { | |
747 | pci_free_consistent(h->pdev, | |
1da177e4 LT |
748 | sizeof(CommandList_struct), c, cmd_dma_handle); |
749 | return NULL; | |
750 | } | |
751 | memset(c->err_info, 0, sizeof(ErrorInfo_struct)); | |
7c832835 BH |
752 | } else { /* get it out of the controllers pool */ |
753 | ||
754 | do { | |
f880632f MM |
755 | i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds); |
756 | if (i == h->nr_cmds) | |
7c832835 BH |
757 | return NULL; |
758 | } while (test_and_set_bit | |
759 | (i & (BITS_PER_LONG - 1), | |
760 | h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0); | |
1da177e4 LT |
761 | #ifdef CCISS_DEBUG |
762 | printk(KERN_DEBUG "cciss: using command buffer %d\n", i); | |
763 | #endif | |
7c832835 | 764 | c = h->cmd_pool + i; |
1da177e4 | 765 | memset(c, 0, sizeof(CommandList_struct)); |
7c832835 BH |
766 | cmd_dma_handle = h->cmd_pool_dhandle |
767 | + i * sizeof(CommandList_struct); | |
1da177e4 LT |
768 | c->err_info = h->errinfo_pool + i; |
769 | memset(c->err_info, 0, sizeof(ErrorInfo_struct)); | |
7c832835 BH |
770 | err_dma_handle = h->errinfo_pool_dhandle |
771 | + i * sizeof(ErrorInfo_struct); | |
772 | h->nr_allocs++; | |
33079b21 MM |
773 | |
774 | c->cmdindex = i; | |
7c832835 | 775 | } |
1da177e4 | 776 | |
8a3173de | 777 | INIT_HLIST_NODE(&c->list); |
1da177e4 | 778 | c->busaddr = (__u32) cmd_dma_handle; |
7c832835 | 779 | temp64.val = (__u64) err_dma_handle; |
1da177e4 LT |
780 | c->ErrDesc.Addr.lower = temp64.val32.lower; |
781 | c->ErrDesc.Addr.upper = temp64.val32.upper; | |
782 | c->ErrDesc.Len = sizeof(ErrorInfo_struct); | |
1da177e4 | 783 | |
7c832835 BH |
784 | c->ctlr = h->ctlr; |
785 | return c; | |
1da177e4 LT |
786 | } |
787 | ||
7c832835 BH |
788 | /* |
789 | * Frees a command block that was previously allocated with cmd_alloc(). | |
1da177e4 LT |
790 | */ |
791 | static void cmd_free(ctlr_info_t *h, CommandList_struct *c, int got_from_pool) | |
792 | { | |
793 | int i; | |
794 | u64bit temp64; | |
795 | ||
7c832835 | 796 | if (!got_from_pool) { |
1da177e4 LT |
797 | temp64.val32.lower = c->ErrDesc.Addr.lower; |
798 | temp64.val32.upper = c->ErrDesc.Addr.upper; | |
7c832835 BH |
799 | pci_free_consistent(h->pdev, sizeof(ErrorInfo_struct), |
800 | c->err_info, (dma_addr_t) temp64.val); | |
801 | pci_free_consistent(h->pdev, sizeof(CommandList_struct), | |
802 | c, (dma_addr_t) c->busaddr); | |
803 | } else { | |
1da177e4 | 804 | i = c - h->cmd_pool; |
7c832835 BH |
805 | clear_bit(i & (BITS_PER_LONG - 1), |
806 | h->cmd_pool_bits + (i / BITS_PER_LONG)); | |
807 | h->nr_frees++; | |
808 | } | |
1da177e4 LT |
809 | } |
810 | ||
811 | static inline ctlr_info_t *get_host(struct gendisk *disk) | |
812 | { | |
7c832835 | 813 | return disk->queue->queuedata; |
1da177e4 LT |
814 | } |
815 | ||
816 | static inline drive_info_struct *get_drv(struct gendisk *disk) | |
817 | { | |
818 | return disk->private_data; | |
819 | } | |
820 | ||
821 | /* | |
822 | * Open. Make sure the device is really there. | |
823 | */ | |
ef7822c2 | 824 | static int cciss_open(struct block_device *bdev, fmode_t mode) |
1da177e4 | 825 | { |
ef7822c2 AV |
826 | ctlr_info_t *host = get_host(bdev->bd_disk); |
827 | drive_info_struct *drv = get_drv(bdev->bd_disk); | |
1da177e4 LT |
828 | |
829 | #ifdef CCISS_DEBUG | |
ef7822c2 | 830 | printk(KERN_DEBUG "cciss_open %s\n", bdev->bd_disk->disk_name); |
7c832835 | 831 | #endif /* CCISS_DEBUG */ |
1da177e4 | 832 | |
2e043986 | 833 | if (drv->busy_configuring) |
ddd47442 | 834 | return -EBUSY; |
1da177e4 LT |
835 | /* |
836 | * Root is allowed to open raw volume zero even if it's not configured | |
837 | * so array config can still work. Root is also allowed to open any | |
838 | * volume that has a LUN ID, so it can issue IOCTL to reread the | |
839 | * disk information. I don't think I really like this | |
840 | * but I'm already using way to many device nodes to claim another one | |
841 | * for "raw controller". | |
842 | */ | |
7a06f789 | 843 | if (drv->heads == 0) { |
ef7822c2 | 844 | if (MINOR(bdev->bd_dev) != 0) { /* not node 0? */ |
1da177e4 | 845 | /* if not node 0 make sure it is a partition = 0 */ |
ef7822c2 | 846 | if (MINOR(bdev->bd_dev) & 0x0f) { |
7c832835 | 847 | return -ENXIO; |
1da177e4 | 848 | /* if it is, make sure we have a LUN ID */ |
39ccf9a6 SC |
849 | } else if (memcmp(drv->LunID, CTLR_LUNID, |
850 | sizeof(drv->LunID))) { | |
1da177e4 LT |
851 | return -ENXIO; |
852 | } | |
853 | } | |
854 | if (!capable(CAP_SYS_ADMIN)) | |
855 | return -EPERM; | |
856 | } | |
857 | drv->usage_count++; | |
858 | host->usage_count++; | |
859 | return 0; | |
860 | } | |
7c832835 | 861 | |
1da177e4 LT |
862 | /* |
863 | * Close. Sync first. | |
864 | */ | |
ef7822c2 | 865 | static int cciss_release(struct gendisk *disk, fmode_t mode) |
1da177e4 | 866 | { |
ef7822c2 AV |
867 | ctlr_info_t *host = get_host(disk); |
868 | drive_info_struct *drv = get_drv(disk); | |
1da177e4 LT |
869 | |
870 | #ifdef CCISS_DEBUG | |
ef7822c2 | 871 | printk(KERN_DEBUG "cciss_release %s\n", disk->disk_name); |
7c832835 | 872 | #endif /* CCISS_DEBUG */ |
1da177e4 LT |
873 | |
874 | drv->usage_count--; | |
875 | host->usage_count--; | |
876 | return 0; | |
877 | } | |
878 | ||
879 | #ifdef CONFIG_COMPAT | |
880 | ||
ef7822c2 AV |
881 | static int do_ioctl(struct block_device *bdev, fmode_t mode, |
882 | unsigned cmd, unsigned long arg) | |
1da177e4 LT |
883 | { |
884 | int ret; | |
885 | lock_kernel(); | |
ef7822c2 | 886 | ret = cciss_ioctl(bdev, mode, cmd, arg); |
1da177e4 LT |
887 | unlock_kernel(); |
888 | return ret; | |
889 | } | |
890 | ||
ef7822c2 AV |
891 | static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode, |
892 | unsigned cmd, unsigned long arg); | |
893 | static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode, | |
894 | unsigned cmd, unsigned long arg); | |
1da177e4 | 895 | |
ef7822c2 AV |
896 | static int cciss_compat_ioctl(struct block_device *bdev, fmode_t mode, |
897 | unsigned cmd, unsigned long arg) | |
1da177e4 LT |
898 | { |
899 | switch (cmd) { | |
900 | case CCISS_GETPCIINFO: | |
901 | case CCISS_GETINTINFO: | |
902 | case CCISS_SETINTINFO: | |
903 | case CCISS_GETNODENAME: | |
904 | case CCISS_SETNODENAME: | |
905 | case CCISS_GETHEARTBEAT: | |
906 | case CCISS_GETBUSTYPES: | |
907 | case CCISS_GETFIRMVER: | |
908 | case CCISS_GETDRIVVER: | |
909 | case CCISS_REVALIDVOLS: | |
910 | case CCISS_DEREGDISK: | |
911 | case CCISS_REGNEWDISK: | |
912 | case CCISS_REGNEWD: | |
913 | case CCISS_RESCANDISK: | |
914 | case CCISS_GETLUNINFO: | |
ef7822c2 | 915 | return do_ioctl(bdev, mode, cmd, arg); |
1da177e4 LT |
916 | |
917 | case CCISS_PASSTHRU32: | |
ef7822c2 | 918 | return cciss_ioctl32_passthru(bdev, mode, cmd, arg); |
1da177e4 | 919 | case CCISS_BIG_PASSTHRU32: |
ef7822c2 | 920 | return cciss_ioctl32_big_passthru(bdev, mode, cmd, arg); |
1da177e4 LT |
921 | |
922 | default: | |
923 | return -ENOIOCTLCMD; | |
924 | } | |
925 | } | |
926 | ||
ef7822c2 AV |
927 | static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode, |
928 | unsigned cmd, unsigned long arg) | |
1da177e4 LT |
929 | { |
930 | IOCTL32_Command_struct __user *arg32 = | |
7c832835 | 931 | (IOCTL32_Command_struct __user *) arg; |
1da177e4 LT |
932 | IOCTL_Command_struct arg64; |
933 | IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64)); | |
934 | int err; | |
935 | u32 cp; | |
936 | ||
937 | err = 0; | |
7c832835 BH |
938 | err |= |
939 | copy_from_user(&arg64.LUN_info, &arg32->LUN_info, | |
940 | sizeof(arg64.LUN_info)); | |
941 | err |= | |
942 | copy_from_user(&arg64.Request, &arg32->Request, | |
943 | sizeof(arg64.Request)); | |
944 | err |= | |
945 | copy_from_user(&arg64.error_info, &arg32->error_info, | |
946 | sizeof(arg64.error_info)); | |
1da177e4 LT |
947 | err |= get_user(arg64.buf_size, &arg32->buf_size); |
948 | err |= get_user(cp, &arg32->buf); | |
949 | arg64.buf = compat_ptr(cp); | |
950 | err |= copy_to_user(p, &arg64, sizeof(arg64)); | |
951 | ||
952 | if (err) | |
953 | return -EFAULT; | |
954 | ||
ef7822c2 | 955 | err = do_ioctl(bdev, mode, CCISS_PASSTHRU, (unsigned long)p); |
1da177e4 LT |
956 | if (err) |
957 | return err; | |
7c832835 BH |
958 | err |= |
959 | copy_in_user(&arg32->error_info, &p->error_info, | |
960 | sizeof(arg32->error_info)); | |
1da177e4 LT |
961 | if (err) |
962 | return -EFAULT; | |
963 | return err; | |
964 | } | |
965 | ||
ef7822c2 AV |
966 | static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode, |
967 | unsigned cmd, unsigned long arg) | |
1da177e4 LT |
968 | { |
969 | BIG_IOCTL32_Command_struct __user *arg32 = | |
7c832835 | 970 | (BIG_IOCTL32_Command_struct __user *) arg; |
1da177e4 | 971 | BIG_IOCTL_Command_struct arg64; |
7c832835 BH |
972 | BIG_IOCTL_Command_struct __user *p = |
973 | compat_alloc_user_space(sizeof(arg64)); | |
1da177e4 LT |
974 | int err; |
975 | u32 cp; | |
976 | ||
977 | err = 0; | |
7c832835 BH |
978 | err |= |
979 | copy_from_user(&arg64.LUN_info, &arg32->LUN_info, | |
980 | sizeof(arg64.LUN_info)); | |
981 | err |= | |
982 | copy_from_user(&arg64.Request, &arg32->Request, | |
983 | sizeof(arg64.Request)); | |
984 | err |= | |
985 | copy_from_user(&arg64.error_info, &arg32->error_info, | |
986 | sizeof(arg64.error_info)); | |
1da177e4 LT |
987 | err |= get_user(arg64.buf_size, &arg32->buf_size); |
988 | err |= get_user(arg64.malloc_size, &arg32->malloc_size); | |
989 | err |= get_user(cp, &arg32->buf); | |
990 | arg64.buf = compat_ptr(cp); | |
991 | err |= copy_to_user(p, &arg64, sizeof(arg64)); | |
992 | ||
993 | if (err) | |
7c832835 | 994 | return -EFAULT; |
1da177e4 | 995 | |
ef7822c2 | 996 | err = do_ioctl(bdev, mode, CCISS_BIG_PASSTHRU, (unsigned long)p); |
1da177e4 LT |
997 | if (err) |
998 | return err; | |
7c832835 BH |
999 | err |= |
1000 | copy_in_user(&arg32->error_info, &p->error_info, | |
1001 | sizeof(arg32->error_info)); | |
1da177e4 LT |
1002 | if (err) |
1003 | return -EFAULT; | |
1004 | return err; | |
1005 | } | |
1006 | #endif | |
a885c8c4 CH |
1007 | |
1008 | static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo) | |
1009 | { | |
1010 | drive_info_struct *drv = get_drv(bdev->bd_disk); | |
1011 | ||
1012 | if (!drv->cylinders) | |
1013 | return -ENXIO; | |
1014 | ||
1015 | geo->heads = drv->heads; | |
1016 | geo->sectors = drv->sectors; | |
1017 | geo->cylinders = drv->cylinders; | |
1018 | return 0; | |
1019 | } | |
1020 | ||
0a9279cc MM |
1021 | static void check_ioctl_unit_attention(ctlr_info_t *host, CommandList_struct *c) |
1022 | { | |
1023 | if (c->err_info->CommandStatus == CMD_TARGET_STATUS && | |
1024 | c->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) | |
1025 | (void)check_for_unit_attention(host, c); | |
1026 | } | |
1da177e4 | 1027 | /* |
7c832835 | 1028 | * ioctl |
1da177e4 | 1029 | */ |
ef7822c2 | 1030 | static int cciss_ioctl(struct block_device *bdev, fmode_t mode, |
7c832835 | 1031 | unsigned int cmd, unsigned long arg) |
1da177e4 | 1032 | { |
1da177e4 LT |
1033 | struct gendisk *disk = bdev->bd_disk; |
1034 | ctlr_info_t *host = get_host(disk); | |
1035 | drive_info_struct *drv = get_drv(disk); | |
1036 | int ctlr = host->ctlr; | |
1037 | void __user *argp = (void __user *)arg; | |
1038 | ||
1039 | #ifdef CCISS_DEBUG | |
1040 | printk(KERN_DEBUG "cciss_ioctl: Called with cmd=%x %lx\n", cmd, arg); | |
7c832835 BH |
1041 | #endif /* CCISS_DEBUG */ |
1042 | ||
1043 | switch (cmd) { | |
1da177e4 | 1044 | case CCISS_GETPCIINFO: |
7c832835 BH |
1045 | { |
1046 | cciss_pci_info_struct pciinfo; | |
1047 | ||
1048 | if (!arg) | |
1049 | return -EINVAL; | |
1050 | pciinfo.domain = pci_domain_nr(host->pdev->bus); | |
1051 | pciinfo.bus = host->pdev->bus->number; | |
1052 | pciinfo.dev_fn = host->pdev->devfn; | |
1053 | pciinfo.board_id = host->board_id; | |
1054 | if (copy_to_user | |
1055 | (argp, &pciinfo, sizeof(cciss_pci_info_struct))) | |
1056 | return -EFAULT; | |
1057 | return 0; | |
1058 | } | |
1da177e4 | 1059 | case CCISS_GETINTINFO: |
7c832835 BH |
1060 | { |
1061 | cciss_coalint_struct intinfo; | |
1062 | if (!arg) | |
1063 | return -EINVAL; | |
1064 | intinfo.delay = | |
1065 | readl(&host->cfgtable->HostWrite.CoalIntDelay); | |
1066 | intinfo.count = | |
1067 | readl(&host->cfgtable->HostWrite.CoalIntCount); | |
1068 | if (copy_to_user | |
1069 | (argp, &intinfo, sizeof(cciss_coalint_struct))) | |
1070 | return -EFAULT; | |
1071 | return 0; | |
1072 | } | |
1da177e4 | 1073 | case CCISS_SETINTINFO: |
1da177e4 | 1074 | { |
7c832835 BH |
1075 | cciss_coalint_struct intinfo; |
1076 | unsigned long flags; | |
1077 | int i; | |
1078 | ||
1079 | if (!arg) | |
1080 | return -EINVAL; | |
1081 | if (!capable(CAP_SYS_ADMIN)) | |
1082 | return -EPERM; | |
1083 | if (copy_from_user | |
1084 | (&intinfo, argp, sizeof(cciss_coalint_struct))) | |
1085 | return -EFAULT; | |
1086 | if ((intinfo.delay == 0) && (intinfo.count == 0)) | |
1087 | { | |
1088 | // printk("cciss_ioctl: delay and count cannot be 0\n"); | |
1089 | return -EINVAL; | |
1090 | } | |
1091 | spin_lock_irqsave(CCISS_LOCK(ctlr), flags); | |
1092 | /* Update the field, and then ring the doorbell */ | |
1093 | writel(intinfo.delay, | |
1094 | &(host->cfgtable->HostWrite.CoalIntDelay)); | |
1095 | writel(intinfo.count, | |
1096 | &(host->cfgtable->HostWrite.CoalIntCount)); | |
1097 | writel(CFGTBL_ChangeReq, host->vaddr + SA5_DOORBELL); | |
1098 | ||
1099 | for (i = 0; i < MAX_IOCTL_CONFIG_WAIT; i++) { | |
1100 | if (!(readl(host->vaddr + SA5_DOORBELL) | |
1101 | & CFGTBL_ChangeReq)) | |
1102 | break; | |
1103 | /* delay and try again */ | |
1104 | udelay(1000); | |
1105 | } | |
1106 | spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); | |
1107 | if (i >= MAX_IOCTL_CONFIG_WAIT) | |
1108 | return -EAGAIN; | |
1109 | return 0; | |
1da177e4 | 1110 | } |
1da177e4 | 1111 | case CCISS_GETNODENAME: |
7c832835 BH |
1112 | { |
1113 | NodeName_type NodeName; | |
1114 | int i; | |
1115 | ||
1116 | if (!arg) | |
1117 | return -EINVAL; | |
1118 | for (i = 0; i < 16; i++) | |
1119 | NodeName[i] = | |
1120 | readb(&host->cfgtable->ServerName[i]); | |
1121 | if (copy_to_user(argp, NodeName, sizeof(NodeName_type))) | |
1122 | return -EFAULT; | |
1123 | return 0; | |
1124 | } | |
1da177e4 | 1125 | case CCISS_SETNODENAME: |
7c832835 BH |
1126 | { |
1127 | NodeName_type NodeName; | |
1128 | unsigned long flags; | |
1129 | int i; | |
1130 | ||
1131 | if (!arg) | |
1132 | return -EINVAL; | |
1133 | if (!capable(CAP_SYS_ADMIN)) | |
1134 | return -EPERM; | |
1135 | ||
1136 | if (copy_from_user | |
1137 | (NodeName, argp, sizeof(NodeName_type))) | |
1138 | return -EFAULT; | |
1139 | ||
1140 | spin_lock_irqsave(CCISS_LOCK(ctlr), flags); | |
1141 | ||
1142 | /* Update the field, and then ring the doorbell */ | |
1143 | for (i = 0; i < 16; i++) | |
1144 | writeb(NodeName[i], | |
1145 | &host->cfgtable->ServerName[i]); | |
1146 | ||
1147 | writel(CFGTBL_ChangeReq, host->vaddr + SA5_DOORBELL); | |
1148 | ||
1149 | for (i = 0; i < MAX_IOCTL_CONFIG_WAIT; i++) { | |
1150 | if (!(readl(host->vaddr + SA5_DOORBELL) | |
1151 | & CFGTBL_ChangeReq)) | |
1152 | break; | |
1153 | /* delay and try again */ | |
1154 | udelay(1000); | |
1155 | } | |
1156 | spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); | |
1157 | if (i >= MAX_IOCTL_CONFIG_WAIT) | |
1158 | return -EAGAIN; | |
1159 | return 0; | |
1160 | } | |
1da177e4 LT |
1161 | |
1162 | case CCISS_GETHEARTBEAT: | |
7c832835 BH |
1163 | { |
1164 | Heartbeat_type heartbeat; | |
1165 | ||
1166 | if (!arg) | |
1167 | return -EINVAL; | |
1168 | heartbeat = readl(&host->cfgtable->HeartBeat); | |
1169 | if (copy_to_user | |
1170 | (argp, &heartbeat, sizeof(Heartbeat_type))) | |
1171 | return -EFAULT; | |
1172 | return 0; | |
1173 | } | |
1da177e4 | 1174 | case CCISS_GETBUSTYPES: |
7c832835 BH |
1175 | { |
1176 | BusTypes_type BusTypes; | |
1177 | ||
1178 | if (!arg) | |
1179 | return -EINVAL; | |
1180 | BusTypes = readl(&host->cfgtable->BusTypes); | |
1181 | if (copy_to_user | |
1182 | (argp, &BusTypes, sizeof(BusTypes_type))) | |
1183 | return -EFAULT; | |
1184 | return 0; | |
1185 | } | |
1da177e4 | 1186 | case CCISS_GETFIRMVER: |
7c832835 BH |
1187 | { |
1188 | FirmwareVer_type firmware; | |
1da177e4 | 1189 | |
7c832835 BH |
1190 | if (!arg) |
1191 | return -EINVAL; | |
1192 | memcpy(firmware, host->firm_ver, 4); | |
1da177e4 | 1193 | |
7c832835 BH |
1194 | if (copy_to_user |
1195 | (argp, firmware, sizeof(FirmwareVer_type))) | |
1196 | return -EFAULT; | |
1197 | return 0; | |
1198 | } | |
1199 | case CCISS_GETDRIVVER: | |
1200 | { | |
1201 | DriverVer_type DriverVer = DRIVER_VERSION; | |
1da177e4 | 1202 | |
7c832835 BH |
1203 | if (!arg) |
1204 | return -EINVAL; | |
1da177e4 | 1205 | |
7c832835 BH |
1206 | if (copy_to_user |
1207 | (argp, &DriverVer, sizeof(DriverVer_type))) | |
1208 | return -EFAULT; | |
1209 | return 0; | |
1210 | } | |
1da177e4 | 1211 | |
6ae5ce8e MM |
1212 | case CCISS_DEREGDISK: |
1213 | case CCISS_REGNEWD: | |
1da177e4 | 1214 | case CCISS_REVALIDVOLS: |
2d11d993 | 1215 | return rebuild_lun_table(host, 0, 1); |
7c832835 BH |
1216 | |
1217 | case CCISS_GETLUNINFO:{ | |
1218 | LogvolInfo_struct luninfo; | |
1219 | ||
39ccf9a6 SC |
1220 | memcpy(&luninfo.LunID, drv->LunID, |
1221 | sizeof(luninfo.LunID)); | |
7c832835 BH |
1222 | luninfo.num_opens = drv->usage_count; |
1223 | luninfo.num_parts = 0; | |
1224 | if (copy_to_user(argp, &luninfo, | |
1225 | sizeof(LogvolInfo_struct))) | |
1226 | return -EFAULT; | |
1227 | return 0; | |
1228 | } | |
1da177e4 | 1229 | case CCISS_PASSTHRU: |
1da177e4 | 1230 | { |
7c832835 BH |
1231 | IOCTL_Command_struct iocommand; |
1232 | CommandList_struct *c; | |
1233 | char *buff = NULL; | |
1234 | u64bit temp64; | |
1235 | unsigned long flags; | |
6e9a4738 | 1236 | DECLARE_COMPLETION_ONSTACK(wait); |
1da177e4 | 1237 | |
7c832835 BH |
1238 | if (!arg) |
1239 | return -EINVAL; | |
1da177e4 | 1240 | |
7c832835 BH |
1241 | if (!capable(CAP_SYS_RAWIO)) |
1242 | return -EPERM; | |
1da177e4 | 1243 | |
7c832835 BH |
1244 | if (copy_from_user |
1245 | (&iocommand, argp, sizeof(IOCTL_Command_struct))) | |
1246 | return -EFAULT; | |
1247 | if ((iocommand.buf_size < 1) && | |
1248 | (iocommand.Request.Type.Direction != XFER_NONE)) { | |
1249 | return -EINVAL; | |
1250 | } | |
1251 | #if 0 /* 'buf_size' member is 16-bits, and always smaller than kmalloc limit */ | |
1252 | /* Check kmalloc limits */ | |
1253 | if (iocommand.buf_size > 128000) | |
1254 | return -EINVAL; | |
1255 | #endif | |
1256 | if (iocommand.buf_size > 0) { | |
1257 | buff = kmalloc(iocommand.buf_size, GFP_KERNEL); | |
1258 | if (buff == NULL) | |
1259 | return -EFAULT; | |
1260 | } | |
1261 | if (iocommand.Request.Type.Direction == XFER_WRITE) { | |
1262 | /* Copy the data into the buffer we created */ | |
1263 | if (copy_from_user | |
1264 | (buff, iocommand.buf, iocommand.buf_size)) { | |
1265 | kfree(buff); | |
1266 | return -EFAULT; | |
1267 | } | |
1268 | } else { | |
1269 | memset(buff, 0, iocommand.buf_size); | |
1270 | } | |
1271 | if ((c = cmd_alloc(host, 0)) == NULL) { | |
1272 | kfree(buff); | |
1273 | return -ENOMEM; | |
1274 | } | |
1275 | // Fill in the command type | |
1276 | c->cmd_type = CMD_IOCTL_PEND; | |
1277 | // Fill in Command Header | |
1278 | c->Header.ReplyQueue = 0; // unused in simple mode | |
1279 | if (iocommand.buf_size > 0) // buffer to fill | |
1280 | { | |
1281 | c->Header.SGList = 1; | |
1282 | c->Header.SGTotal = 1; | |
1283 | } else // no buffers to fill | |
1284 | { | |
1285 | c->Header.SGList = 0; | |
1286 | c->Header.SGTotal = 0; | |
1287 | } | |
1288 | c->Header.LUN = iocommand.LUN_info; | |
1289 | c->Header.Tag.lower = c->busaddr; // use the kernel address the cmd block for tag | |
1da177e4 | 1290 | |
7c832835 BH |
1291 | // Fill in Request block |
1292 | c->Request = iocommand.Request; | |
1da177e4 | 1293 | |
7c832835 BH |
1294 | // Fill in the scatter gather information |
1295 | if (iocommand.buf_size > 0) { | |
1296 | temp64.val = pci_map_single(host->pdev, buff, | |
1297 | iocommand.buf_size, | |
1298 | PCI_DMA_BIDIRECTIONAL); | |
1299 | c->SG[0].Addr.lower = temp64.val32.lower; | |
1300 | c->SG[0].Addr.upper = temp64.val32.upper; | |
1301 | c->SG[0].Len = iocommand.buf_size; | |
1302 | c->SG[0].Ext = 0; // we are not chaining | |
1303 | } | |
1304 | c->waiting = &wait; | |
1305 | ||
1306 | /* Put the request on the tail of the request queue */ | |
1307 | spin_lock_irqsave(CCISS_LOCK(ctlr), flags); | |
1308 | addQ(&host->reqQ, c); | |
1309 | host->Qdepth++; | |
1310 | start_io(host); | |
1311 | spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); | |
1312 | ||
1313 | wait_for_completion(&wait); | |
1314 | ||
1315 | /* unlock the buffers from DMA */ | |
1316 | temp64.val32.lower = c->SG[0].Addr.lower; | |
1317 | temp64.val32.upper = c->SG[0].Addr.upper; | |
1318 | pci_unmap_single(host->pdev, (dma_addr_t) temp64.val, | |
1319 | iocommand.buf_size, | |
1320 | PCI_DMA_BIDIRECTIONAL); | |
1321 | ||
0a9279cc MM |
1322 | check_ioctl_unit_attention(host, c); |
1323 | ||
7c832835 BH |
1324 | /* Copy the error information out */ |
1325 | iocommand.error_info = *(c->err_info); | |
1326 | if (copy_to_user | |
1327 | (argp, &iocommand, sizeof(IOCTL_Command_struct))) { | |
1328 | kfree(buff); | |
1da177e4 LT |
1329 | cmd_free(host, c, 0); |
1330 | return -EFAULT; | |
1331 | } | |
7c832835 BH |
1332 | |
1333 | if (iocommand.Request.Type.Direction == XFER_READ) { | |
1334 | /* Copy the data out of the buffer we created */ | |
1335 | if (copy_to_user | |
1336 | (iocommand.buf, buff, iocommand.buf_size)) { | |
1337 | kfree(buff); | |
1338 | cmd_free(host, c, 0); | |
1339 | return -EFAULT; | |
1340 | } | |
1341 | } | |
1342 | kfree(buff); | |
1343 | cmd_free(host, c, 0); | |
1344 | return 0; | |
1da177e4 | 1345 | } |
7c832835 BH |
1346 | case CCISS_BIG_PASSTHRU:{ |
1347 | BIG_IOCTL_Command_struct *ioc; | |
1348 | CommandList_struct *c; | |
1349 | unsigned char **buff = NULL; | |
1350 | int *buff_size = NULL; | |
1351 | u64bit temp64; | |
1352 | unsigned long flags; | |
1353 | BYTE sg_used = 0; | |
1354 | int status = 0; | |
1355 | int i; | |
6e9a4738 | 1356 | DECLARE_COMPLETION_ONSTACK(wait); |
7c832835 BH |
1357 | __u32 left; |
1358 | __u32 sz; | |
1359 | BYTE __user *data_ptr; | |
1360 | ||
1361 | if (!arg) | |
1362 | return -EINVAL; | |
1363 | if (!capable(CAP_SYS_RAWIO)) | |
1364 | return -EPERM; | |
1365 | ioc = (BIG_IOCTL_Command_struct *) | |
1366 | kmalloc(sizeof(*ioc), GFP_KERNEL); | |
1367 | if (!ioc) { | |
1368 | status = -ENOMEM; | |
1369 | goto cleanup1; | |
1370 | } | |
1371 | if (copy_from_user(ioc, argp, sizeof(*ioc))) { | |
1372 | status = -EFAULT; | |
1373 | goto cleanup1; | |
1374 | } | |
1375 | if ((ioc->buf_size < 1) && | |
1376 | (ioc->Request.Type.Direction != XFER_NONE)) { | |
1da177e4 LT |
1377 | status = -EINVAL; |
1378 | goto cleanup1; | |
7c832835 BH |
1379 | } |
1380 | /* Check kmalloc limits using all SGs */ | |
1381 | if (ioc->malloc_size > MAX_KMALLOC_SIZE) { | |
1382 | status = -EINVAL; | |
1383 | goto cleanup1; | |
1384 | } | |
1385 | if (ioc->buf_size > ioc->malloc_size * MAXSGENTRIES) { | |
1386 | status = -EINVAL; | |
1387 | goto cleanup1; | |
1388 | } | |
1389 | buff = | |
1390 | kzalloc(MAXSGENTRIES * sizeof(char *), GFP_KERNEL); | |
1391 | if (!buff) { | |
1da177e4 LT |
1392 | status = -ENOMEM; |
1393 | goto cleanup1; | |
1394 | } | |
5cbded58 | 1395 | buff_size = kmalloc(MAXSGENTRIES * sizeof(int), |
7c832835 BH |
1396 | GFP_KERNEL); |
1397 | if (!buff_size) { | |
1398 | status = -ENOMEM; | |
1399 | goto cleanup1; | |
1400 | } | |
1401 | left = ioc->buf_size; | |
1402 | data_ptr = ioc->buf; | |
1403 | while (left) { | |
1404 | sz = (left > | |
1405 | ioc->malloc_size) ? ioc-> | |
1406 | malloc_size : left; | |
1407 | buff_size[sg_used] = sz; | |
1408 | buff[sg_used] = kmalloc(sz, GFP_KERNEL); | |
1409 | if (buff[sg_used] == NULL) { | |
1da177e4 | 1410 | status = -ENOMEM; |
15534d38 JA |
1411 | goto cleanup1; |
1412 | } | |
7c832835 BH |
1413 | if (ioc->Request.Type.Direction == XFER_WRITE) { |
1414 | if (copy_from_user | |
1415 | (buff[sg_used], data_ptr, sz)) { | |
f7108f91 | 1416 | status = -EFAULT; |
7c832835 BH |
1417 | goto cleanup1; |
1418 | } | |
1419 | } else { | |
1420 | memset(buff[sg_used], 0, sz); | |
1421 | } | |
1422 | left -= sz; | |
1423 | data_ptr += sz; | |
1424 | sg_used++; | |
1425 | } | |
1426 | if ((c = cmd_alloc(host, 0)) == NULL) { | |
1427 | status = -ENOMEM; | |
1428 | goto cleanup1; | |
1429 | } | |
1430 | c->cmd_type = CMD_IOCTL_PEND; | |
1431 | c->Header.ReplyQueue = 0; | |
1432 | ||
1433 | if (ioc->buf_size > 0) { | |
1434 | c->Header.SGList = sg_used; | |
1435 | c->Header.SGTotal = sg_used; | |
1da177e4 | 1436 | } else { |
7c832835 BH |
1437 | c->Header.SGList = 0; |
1438 | c->Header.SGTotal = 0; | |
1da177e4 | 1439 | } |
7c832835 BH |
1440 | c->Header.LUN = ioc->LUN_info; |
1441 | c->Header.Tag.lower = c->busaddr; | |
1442 | ||
1443 | c->Request = ioc->Request; | |
1444 | if (ioc->buf_size > 0) { | |
1445 | int i; | |
1446 | for (i = 0; i < sg_used; i++) { | |
1447 | temp64.val = | |
1448 | pci_map_single(host->pdev, buff[i], | |
1449 | buff_size[i], | |
1450 | PCI_DMA_BIDIRECTIONAL); | |
1451 | c->SG[i].Addr.lower = | |
1452 | temp64.val32.lower; | |
1453 | c->SG[i].Addr.upper = | |
1454 | temp64.val32.upper; | |
1455 | c->SG[i].Len = buff_size[i]; | |
1456 | c->SG[i].Ext = 0; /* we are not chaining */ | |
1457 | } | |
1458 | } | |
1459 | c->waiting = &wait; | |
1460 | /* Put the request on the tail of the request queue */ | |
1461 | spin_lock_irqsave(CCISS_LOCK(ctlr), flags); | |
1462 | addQ(&host->reqQ, c); | |
1463 | host->Qdepth++; | |
1464 | start_io(host); | |
1465 | spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); | |
1466 | wait_for_completion(&wait); | |
1467 | /* unlock the buffers from DMA */ | |
1468 | for (i = 0; i < sg_used; i++) { | |
1469 | temp64.val32.lower = c->SG[i].Addr.lower; | |
1470 | temp64.val32.upper = c->SG[i].Addr.upper; | |
1471 | pci_unmap_single(host->pdev, | |
1472 | (dma_addr_t) temp64.val, buff_size[i], | |
1da177e4 | 1473 | PCI_DMA_BIDIRECTIONAL); |
1da177e4 | 1474 | } |
0a9279cc | 1475 | check_ioctl_unit_attention(host, c); |
7c832835 BH |
1476 | /* Copy the error information out */ |
1477 | ioc->error_info = *(c->err_info); | |
1478 | if (copy_to_user(argp, ioc, sizeof(*ioc))) { | |
1479 | cmd_free(host, c, 0); | |
1480 | status = -EFAULT; | |
1481 | goto cleanup1; | |
1482 | } | |
1483 | if (ioc->Request.Type.Direction == XFER_READ) { | |
1484 | /* Copy the data out of the buffer we created */ | |
1485 | BYTE __user *ptr = ioc->buf; | |
1486 | for (i = 0; i < sg_used; i++) { | |
1487 | if (copy_to_user | |
1488 | (ptr, buff[i], buff_size[i])) { | |
1489 | cmd_free(host, c, 0); | |
1490 | status = -EFAULT; | |
1491 | goto cleanup1; | |
1492 | } | |
1493 | ptr += buff_size[i]; | |
1da177e4 | 1494 | } |
1da177e4 | 1495 | } |
7c832835 BH |
1496 | cmd_free(host, c, 0); |
1497 | status = 0; | |
1498 | cleanup1: | |
1499 | if (buff) { | |
1500 | for (i = 0; i < sg_used; i++) | |
1501 | kfree(buff[i]); | |
1502 | kfree(buff); | |
1503 | } | |
1504 | kfree(buff_size); | |
1505 | kfree(ioc); | |
1506 | return status; | |
1da177e4 | 1507 | } |
03bbfee5 MMOD |
1508 | |
1509 | /* scsi_cmd_ioctl handles these, below, though some are not */ | |
1510 | /* very meaningful for cciss. SG_IO is the main one people want. */ | |
1511 | ||
1512 | case SG_GET_VERSION_NUM: | |
1513 | case SG_SET_TIMEOUT: | |
1514 | case SG_GET_TIMEOUT: | |
1515 | case SG_GET_RESERVED_SIZE: | |
1516 | case SG_SET_RESERVED_SIZE: | |
1517 | case SG_EMULATED_HOST: | |
1518 | case SG_IO: | |
1519 | case SCSI_IOCTL_SEND_COMMAND: | |
ef7822c2 | 1520 | return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, argp); |
03bbfee5 MMOD |
1521 | |
1522 | /* scsi_cmd_ioctl would normally handle these, below, but */ | |
1523 | /* they aren't a good fit for cciss, as CD-ROMs are */ | |
1524 | /* not supported, and we don't have any bus/target/lun */ | |
1525 | /* which we present to the kernel. */ | |
1526 | ||
1527 | case CDROM_SEND_PACKET: | |
1528 | case CDROMCLOSETRAY: | |
1529 | case CDROMEJECT: | |
1530 | case SCSI_IOCTL_GET_IDLUN: | |
1531 | case SCSI_IOCTL_GET_BUS_NUMBER: | |
1da177e4 LT |
1532 | default: |
1533 | return -ENOTTY; | |
1534 | } | |
1da177e4 LT |
1535 | } |
1536 | ||
7b30f092 JA |
1537 | static void cciss_check_queues(ctlr_info_t *h) |
1538 | { | |
1539 | int start_queue = h->next_to_run; | |
1540 | int i; | |
1541 | ||
1542 | /* check to see if we have maxed out the number of commands that can | |
1543 | * be placed on the queue. If so then exit. We do this check here | |
1544 | * in case the interrupt we serviced was from an ioctl and did not | |
1545 | * free any new commands. | |
1546 | */ | |
f880632f | 1547 | if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds) |
7b30f092 JA |
1548 | return; |
1549 | ||
1550 | /* We have room on the queue for more commands. Now we need to queue | |
1551 | * them up. We will also keep track of the next queue to run so | |
1552 | * that every queue gets a chance to be started first. | |
1553 | */ | |
1554 | for (i = 0; i < h->highest_lun + 1; i++) { | |
1555 | int curr_queue = (start_queue + i) % (h->highest_lun + 1); | |
1556 | /* make sure the disk has been added and the drive is real | |
1557 | * because this can be called from the middle of init_one. | |
1558 | */ | |
1559 | if (!(h->drv[curr_queue].queue) || !(h->drv[curr_queue].heads)) | |
1560 | continue; | |
1561 | blk_start_queue(h->gendisk[curr_queue]->queue); | |
1562 | ||
1563 | /* check to see if we have maxed out the number of commands | |
1564 | * that can be placed on the queue. | |
1565 | */ | |
f880632f | 1566 | if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds) { |
7b30f092 JA |
1567 | if (curr_queue == start_queue) { |
1568 | h->next_to_run = | |
1569 | (start_queue + 1) % (h->highest_lun + 1); | |
1570 | break; | |
1571 | } else { | |
1572 | h->next_to_run = curr_queue; | |
1573 | break; | |
1574 | } | |
7b30f092 JA |
1575 | } |
1576 | } | |
1577 | } | |
1578 | ||
ca1e0484 MM |
1579 | static void cciss_softirq_done(struct request *rq) |
1580 | { | |
1581 | CommandList_struct *cmd = rq->completion_data; | |
1582 | ctlr_info_t *h = hba[cmd->ctlr]; | |
1583 | unsigned long flags; | |
1584 | u64bit temp64; | |
1585 | int i, ddir; | |
1586 | ||
1587 | if (cmd->Request.Type.Direction == XFER_READ) | |
1588 | ddir = PCI_DMA_FROMDEVICE; | |
1589 | else | |
1590 | ddir = PCI_DMA_TODEVICE; | |
1591 | ||
1592 | /* command did not need to be retried */ | |
1593 | /* unmap the DMA mapping for all the scatter gather elements */ | |
7c832835 | 1594 | for (i = 0; i < cmd->Header.SGList; i++) { |
ca1e0484 MM |
1595 | temp64.val32.lower = cmd->SG[i].Addr.lower; |
1596 | temp64.val32.upper = cmd->SG[i].Addr.upper; | |
1597 | pci_unmap_page(h->pdev, temp64.val, cmd->SG[i].Len, ddir); | |
1598 | } | |
1599 | ||
ca1e0484 MM |
1600 | #ifdef CCISS_DEBUG |
1601 | printk("Done with %p\n", rq); | |
7c832835 | 1602 | #endif /* CCISS_DEBUG */ |
ca1e0484 | 1603 | |
c3a4d78c | 1604 | /* set the residual count for pc requests */ |
ac44e5b2 | 1605 | if (blk_pc_request(rq)) |
c3a4d78c | 1606 | rq->resid_len = cmd->err_info->ResidualCnt; |
ac44e5b2 | 1607 | |
c3a4d78c | 1608 | blk_end_request_all(rq, (rq->errors == 0) ? 0 : -EIO); |
3daeea29 | 1609 | |
ca1e0484 | 1610 | spin_lock_irqsave(&h->lock, flags); |
7c832835 | 1611 | cmd_free(h, cmd, 1); |
7b30f092 | 1612 | cciss_check_queues(h); |
ca1e0484 MM |
1613 | spin_unlock_irqrestore(&h->lock, flags); |
1614 | } | |
1615 | ||
39ccf9a6 SC |
1616 | static inline void log_unit_to_scsi3addr(ctlr_info_t *h, |
1617 | unsigned char scsi3addr[], uint32_t log_unit) | |
b57695fe | 1618 | { |
39ccf9a6 SC |
1619 | memcpy(scsi3addr, h->drv[log_unit].LunID, |
1620 | sizeof(h->drv[log_unit].LunID)); | |
b57695fe | 1621 | } |
1622 | ||
7fe06326 AP |
1623 | /* This function gets the SCSI vendor, model, and revision of a logical drive |
1624 | * via the inquiry page 0. Model, vendor, and rev are set to empty strings if | |
1625 | * they cannot be read. | |
1626 | */ | |
1627 | static void cciss_get_device_descr(int ctlr, int logvol, int withirq, | |
1628 | char *vendor, char *model, char *rev) | |
1629 | { | |
1630 | int rc; | |
1631 | InquiryData_struct *inq_buf; | |
b57695fe | 1632 | unsigned char scsi3addr[8]; |
7fe06326 AP |
1633 | |
1634 | *vendor = '\0'; | |
1635 | *model = '\0'; | |
1636 | *rev = '\0'; | |
1637 | ||
1638 | inq_buf = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL); | |
1639 | if (!inq_buf) | |
1640 | return; | |
1641 | ||
b57695fe | 1642 | log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol); |
7fe06326 AP |
1643 | if (withirq) |
1644 | rc = sendcmd_withirq(CISS_INQUIRY, ctlr, inq_buf, | |
b57695fe | 1645 | sizeof(InquiryData_struct), 0, |
1646 | scsi3addr, TYPE_CMD); | |
7fe06326 AP |
1647 | else |
1648 | rc = sendcmd(CISS_INQUIRY, ctlr, inq_buf, | |
b57695fe | 1649 | sizeof(InquiryData_struct), 0, |
1650 | scsi3addr, TYPE_CMD); | |
7fe06326 AP |
1651 | if (rc == IO_OK) { |
1652 | memcpy(vendor, &inq_buf->data_byte[8], VENDOR_LEN); | |
1653 | vendor[VENDOR_LEN] = '\0'; | |
1654 | memcpy(model, &inq_buf->data_byte[16], MODEL_LEN); | |
1655 | model[MODEL_LEN] = '\0'; | |
1656 | memcpy(rev, &inq_buf->data_byte[32], REV_LEN); | |
1657 | rev[REV_LEN] = '\0'; | |
1658 | } | |
1659 | ||
1660 | kfree(inq_buf); | |
1661 | return; | |
1662 | } | |
1663 | ||
a72da29b MM |
1664 | /* This function gets the serial number of a logical drive via |
1665 | * inquiry page 0x83. Serial no. is 16 bytes. If the serial | |
1666 | * number cannot be had, for whatever reason, 16 bytes of 0xff | |
1667 | * are returned instead. | |
1668 | */ | |
1669 | static void cciss_get_serial_no(int ctlr, int logvol, int withirq, | |
1670 | unsigned char *serial_no, int buflen) | |
1671 | { | |
1672 | #define PAGE_83_INQ_BYTES 64 | |
1673 | int rc; | |
1674 | unsigned char *buf; | |
b57695fe | 1675 | unsigned char scsi3addr[8]; |
a72da29b MM |
1676 | |
1677 | if (buflen > 16) | |
1678 | buflen = 16; | |
1679 | memset(serial_no, 0xff, buflen); | |
1680 | buf = kzalloc(PAGE_83_INQ_BYTES, GFP_KERNEL); | |
1681 | if (!buf) | |
1682 | return; | |
1683 | memset(serial_no, 0, buflen); | |
b57695fe | 1684 | log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol); |
a72da29b MM |
1685 | if (withirq) |
1686 | rc = sendcmd_withirq(CISS_INQUIRY, ctlr, buf, | |
b57695fe | 1687 | PAGE_83_INQ_BYTES, 0x83, scsi3addr, TYPE_CMD); |
a72da29b MM |
1688 | else |
1689 | rc = sendcmd(CISS_INQUIRY, ctlr, buf, | |
b57695fe | 1690 | PAGE_83_INQ_BYTES, 0x83, scsi3addr, TYPE_CMD); |
a72da29b MM |
1691 | if (rc == IO_OK) |
1692 | memcpy(serial_no, &buf[8], buflen); | |
1693 | kfree(buf); | |
1694 | return; | |
1695 | } | |
1696 | ||
617e1344 SC |
1697 | /* |
1698 | * cciss_add_disk sets up the block device queue for a logical drive | |
1699 | */ | |
1700 | static int cciss_add_disk(ctlr_info_t *h, struct gendisk *disk, | |
6ae5ce8e MM |
1701 | int drv_index) |
1702 | { | |
1703 | disk->queue = blk_init_queue(do_cciss_request, &h->lock); | |
e8074f79 SC |
1704 | if (!disk->queue) |
1705 | goto init_queue_failure; | |
6ae5ce8e MM |
1706 | sprintf(disk->disk_name, "cciss/c%dd%d", h->ctlr, drv_index); |
1707 | disk->major = h->major; | |
1708 | disk->first_minor = drv_index << NWD_SHIFT; | |
1709 | disk->fops = &cciss_fops; | |
617e1344 SC |
1710 | if (h->drv[drv_index].dev == NULL) { |
1711 | if (cciss_create_ld_sysfs_entry(h, drv_index)) | |
1712 | goto cleanup_queue; | |
1713 | } | |
6ae5ce8e | 1714 | disk->private_data = &h->drv[drv_index]; |
617e1344 | 1715 | disk->driverfs_dev = h->drv[drv_index].dev; |
6ae5ce8e MM |
1716 | |
1717 | /* Set up queue information */ | |
1718 | blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask); | |
1719 | ||
1720 | /* This is a hardware imposed limit. */ | |
1721 | blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES); | |
1722 | ||
1723 | /* This is a limit in the driver and could be eliminated. */ | |
1724 | blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES); | |
1725 | ||
1726 | blk_queue_max_sectors(disk->queue, h->cciss_max_sectors); | |
1727 | ||
1728 | blk_queue_softirq_done(disk->queue, cciss_softirq_done); | |
1729 | ||
1730 | disk->queue->queuedata = h; | |
1731 | ||
e1defc4f MP |
1732 | blk_queue_logical_block_size(disk->queue, |
1733 | h->drv[drv_index].block_size); | |
6ae5ce8e MM |
1734 | |
1735 | /* Make sure all queue data is written out before */ | |
1736 | /* setting h->drv[drv_index].queue, as setting this */ | |
1737 | /* allows the interrupt handler to start the queue */ | |
1738 | wmb(); | |
1739 | h->drv[drv_index].queue = disk->queue; | |
1740 | add_disk(disk); | |
617e1344 SC |
1741 | return 0; |
1742 | ||
1743 | cleanup_queue: | |
1744 | blk_cleanup_queue(disk->queue); | |
1745 | disk->queue = NULL; | |
e8074f79 | 1746 | init_queue_failure: |
617e1344 | 1747 | return -1; |
6ae5ce8e MM |
1748 | } |
1749 | ||
ddd47442 | 1750 | /* This function will check the usage_count of the drive to be updated/added. |
a72da29b MM |
1751 | * If the usage_count is zero and it is a heretofore unknown drive, or, |
1752 | * the drive's capacity, geometry, or serial number has changed, | |
1753 | * then the drive information will be updated and the disk will be | |
1754 | * re-registered with the kernel. If these conditions don't hold, | |
1755 | * then it will be left alone for the next reboot. The exception to this | |
1756 | * is disk 0 which will always be left registered with the kernel since it | |
1757 | * is also the controller node. Any changes to disk 0 will show up on | |
1758 | * the next reboot. | |
7c832835 | 1759 | */ |
2d11d993 SC |
1760 | static void cciss_update_drive_info(int ctlr, int drv_index, int first_time, |
1761 | int via_ioctl) | |
7c832835 | 1762 | { |
ddd47442 MM |
1763 | ctlr_info_t *h = hba[ctlr]; |
1764 | struct gendisk *disk; | |
ddd47442 MM |
1765 | InquiryData_struct *inq_buff = NULL; |
1766 | unsigned int block_size; | |
00988a35 | 1767 | sector_t total_size; |
ddd47442 MM |
1768 | unsigned long flags = 0; |
1769 | int ret = 0; | |
a72da29b MM |
1770 | drive_info_struct *drvinfo; |
1771 | ||
1772 | /* Get information about the disk and modify the driver structure */ | |
1773 | inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL); | |
1774 | drvinfo = kmalloc(sizeof(*drvinfo), GFP_KERNEL); | |
1775 | if (inq_buff == NULL || drvinfo == NULL) | |
1776 | goto mem_msg; | |
1777 | ||
1778 | /* testing to see if 16-byte CDBs are already being used */ | |
1779 | if (h->cciss_read == CCISS_READ_16) { | |
1780 | cciss_read_capacity_16(h->ctlr, drv_index, 1, | |
1781 | &total_size, &block_size); | |
1782 | ||
1783 | } else { | |
1784 | cciss_read_capacity(ctlr, drv_index, 1, | |
1785 | &total_size, &block_size); | |
1786 | ||
1787 | /* if read_capacity returns all F's this volume is >2TB */ | |
1788 | /* in size so we switch to 16-byte CDB's for all */ | |
1789 | /* read/write ops */ | |
1790 | if (total_size == 0xFFFFFFFFULL) { | |
1791 | cciss_read_capacity_16(ctlr, drv_index, 1, | |
1792 | &total_size, &block_size); | |
1793 | h->cciss_read = CCISS_READ_16; | |
1794 | h->cciss_write = CCISS_WRITE_16; | |
1795 | } else { | |
1796 | h->cciss_read = CCISS_READ_10; | |
1797 | h->cciss_write = CCISS_WRITE_10; | |
1798 | } | |
1799 | } | |
1800 | ||
1801 | cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size, | |
1802 | inq_buff, drvinfo); | |
1803 | drvinfo->block_size = block_size; | |
1804 | drvinfo->nr_blocks = total_size + 1; | |
1805 | ||
7fe06326 AP |
1806 | cciss_get_device_descr(ctlr, drv_index, 1, drvinfo->vendor, |
1807 | drvinfo->model, drvinfo->rev); | |
a72da29b MM |
1808 | cciss_get_serial_no(ctlr, drv_index, 1, drvinfo->serial_no, |
1809 | sizeof(drvinfo->serial_no)); | |
1810 | ||
1811 | /* Is it the same disk we already know, and nothing's changed? */ | |
1812 | if (h->drv[drv_index].raid_level != -1 && | |
1813 | ((memcmp(drvinfo->serial_no, | |
1814 | h->drv[drv_index].serial_no, 16) == 0) && | |
1815 | drvinfo->block_size == h->drv[drv_index].block_size && | |
1816 | drvinfo->nr_blocks == h->drv[drv_index].nr_blocks && | |
1817 | drvinfo->heads == h->drv[drv_index].heads && | |
1818 | drvinfo->sectors == h->drv[drv_index].sectors && | |
6ae5ce8e | 1819 | drvinfo->cylinders == h->drv[drv_index].cylinders)) |
a72da29b MM |
1820 | /* The disk is unchanged, nothing to update */ |
1821 | goto freeret; | |
a72da29b | 1822 | |
6ae5ce8e MM |
1823 | /* If we get here it's not the same disk, or something's changed, |
1824 | * so we need to * deregister it, and re-register it, if it's not | |
1825 | * in use. | |
1826 | * If the disk already exists then deregister it before proceeding | |
1827 | * (unless it's the first disk (for the controller node). | |
1828 | */ | |
a72da29b MM |
1829 | if (h->drv[drv_index].raid_level != -1 && drv_index != 0) { |
1830 | printk(KERN_WARNING "disk %d has changed.\n", drv_index); | |
ddd47442 MM |
1831 | spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); |
1832 | h->drv[drv_index].busy_configuring = 1; | |
1833 | spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); | |
e14ac670 | 1834 | |
6ae5ce8e MM |
1835 | /* deregister_disk sets h->drv[drv_index].queue = NULL |
1836 | * which keeps the interrupt handler from starting | |
1837 | * the queue. | |
1838 | */ | |
2d11d993 | 1839 | ret = deregister_disk(h, drv_index, 0, via_ioctl); |
ddd47442 MM |
1840 | h->drv[drv_index].busy_configuring = 0; |
1841 | } | |
1842 | ||
1843 | /* If the disk is in use return */ | |
1844 | if (ret) | |
a72da29b MM |
1845 | goto freeret; |
1846 | ||
6ae5ce8e MM |
1847 | /* Save the new information from cciss_geometry_inquiry |
1848 | * and serial number inquiry. | |
1849 | */ | |
a72da29b MM |
1850 | h->drv[drv_index].block_size = drvinfo->block_size; |
1851 | h->drv[drv_index].nr_blocks = drvinfo->nr_blocks; | |
1852 | h->drv[drv_index].heads = drvinfo->heads; | |
1853 | h->drv[drv_index].sectors = drvinfo->sectors; | |
1854 | h->drv[drv_index].cylinders = drvinfo->cylinders; | |
1855 | h->drv[drv_index].raid_level = drvinfo->raid_level; | |
1856 | memcpy(h->drv[drv_index].serial_no, drvinfo->serial_no, 16); | |
7fe06326 AP |
1857 | memcpy(h->drv[drv_index].vendor, drvinfo->vendor, VENDOR_LEN + 1); |
1858 | memcpy(h->drv[drv_index].model, drvinfo->model, MODEL_LEN + 1); | |
1859 | memcpy(h->drv[drv_index].rev, drvinfo->rev, REV_LEN + 1); | |
ddd47442 MM |
1860 | |
1861 | ++h->num_luns; | |
1862 | disk = h->gendisk[drv_index]; | |
1863 | set_capacity(disk, h->drv[drv_index].nr_blocks); | |
1864 | ||
6ae5ce8e MM |
1865 | /* If it's not disk 0 (drv_index != 0) |
1866 | * or if it was disk 0, but there was previously | |
1867 | * no actual corresponding configured logical drive | |
1868 | * (raid_leve == -1) then we want to update the | |
1869 | * logical drive's information. | |
1870 | */ | |
361e9b07 SC |
1871 | if (drv_index || first_time) { |
1872 | if (cciss_add_disk(h, disk, drv_index) != 0) { | |
1873 | cciss_free_gendisk(h, drv_index); | |
1874 | printk(KERN_WARNING "cciss:%d could not update " | |
1875 | "disk %d\n", h->ctlr, drv_index); | |
1876 | --h->num_luns; | |
1877 | } | |
1878 | } | |
ddd47442 | 1879 | |
6ae5ce8e | 1880 | freeret: |
ddd47442 | 1881 | kfree(inq_buff); |
a72da29b | 1882 | kfree(drvinfo); |
ddd47442 | 1883 | return; |
6ae5ce8e | 1884 | mem_msg: |
ddd47442 MM |
1885 | printk(KERN_ERR "cciss: out of memory\n"); |
1886 | goto freeret; | |
1887 | } | |
1888 | ||
1889 | /* This function will find the first index of the controllers drive array | |
1890 | * that has a -1 for the raid_level and will return that index. This is | |
1891 | * where new drives will be added. If the index to be returned is greater | |
1892 | * than the highest_lun index for the controller then highest_lun is set | |
1893 | * to this new index. If there are no available indexes then -1 is returned. | |
eece695f MM |
1894 | * "controller_node" is used to know if this is a real logical drive, or just |
1895 | * the controller node, which determines if this counts towards highest_lun. | |
7c832835 | 1896 | */ |
eece695f | 1897 | static int cciss_find_free_drive_index(int ctlr, int controller_node) |
ddd47442 MM |
1898 | { |
1899 | int i; | |
1900 | ||
7c832835 BH |
1901 | for (i = 0; i < CISS_MAX_LUN; i++) { |
1902 | if (hba[ctlr]->drv[i].raid_level == -1) { | |
ddd47442 | 1903 | if (i > hba[ctlr]->highest_lun) |
eece695f MM |
1904 | if (!controller_node) |
1905 | hba[ctlr]->highest_lun = i; | |
ddd47442 MM |
1906 | return i; |
1907 | } | |
1908 | } | |
1909 | return -1; | |
1910 | } | |
1911 | ||
361e9b07 SC |
1912 | static void cciss_free_gendisk(ctlr_info_t *h, int drv_index) |
1913 | { | |
1914 | put_disk(h->gendisk[drv_index]); | |
1915 | h->gendisk[drv_index] = NULL; | |
1916 | } | |
1917 | ||
6ae5ce8e MM |
1918 | /* cciss_add_gendisk finds a free hba[]->drv structure |
1919 | * and allocates a gendisk if needed, and sets the lunid | |
1920 | * in the drvinfo structure. It returns the index into | |
1921 | * the ->drv[] array, or -1 if none are free. | |
1922 | * is_controller_node indicates whether highest_lun should | |
1923 | * count this disk, or if it's only being added to provide | |
1924 | * a means to talk to the controller in case no logical | |
1925 | * drives have yet been configured. | |
1926 | */ | |
39ccf9a6 SC |
1927 | static int cciss_add_gendisk(ctlr_info_t *h, unsigned char lunid[], |
1928 | int controller_node) | |
6ae5ce8e MM |
1929 | { |
1930 | int drv_index; | |
1931 | ||
eece695f | 1932 | drv_index = cciss_find_free_drive_index(h->ctlr, controller_node); |
6ae5ce8e MM |
1933 | if (drv_index == -1) |
1934 | return -1; | |
8ce51966 | 1935 | |
6ae5ce8e MM |
1936 | /*Check if the gendisk needs to be allocated */ |
1937 | if (!h->gendisk[drv_index]) { | |
1938 | h->gendisk[drv_index] = | |
1939 | alloc_disk(1 << NWD_SHIFT); | |
1940 | if (!h->gendisk[drv_index]) { | |
1941 | printk(KERN_ERR "cciss%d: could not " | |
1942 | "allocate a new disk %d\n", | |
1943 | h->ctlr, drv_index); | |
1944 | return -1; | |
1945 | } | |
1946 | } | |
39ccf9a6 SC |
1947 | memcpy(h->drv[drv_index].LunID, lunid, |
1948 | sizeof(h->drv[drv_index].LunID)); | |
097d0264 SC |
1949 | if (h->drv[drv_index].dev == NULL) { |
1950 | if (cciss_create_ld_sysfs_entry(h, drv_index)) | |
1951 | goto err_free_disk; | |
1952 | } | |
6ae5ce8e MM |
1953 | /* Don't need to mark this busy because nobody */ |
1954 | /* else knows about this disk yet to contend */ | |
1955 | /* for access to it. */ | |
1956 | h->drv[drv_index].busy_configuring = 0; | |
1957 | wmb(); | |
1958 | return drv_index; | |
7fe06326 AP |
1959 | |
1960 | err_free_disk: | |
361e9b07 | 1961 | cciss_free_gendisk(h, drv_index); |
7fe06326 | 1962 | return -1; |
6ae5ce8e MM |
1963 | } |
1964 | ||
1965 | /* This is for the special case of a controller which | |
1966 | * has no logical drives. In this case, we still need | |
1967 | * to register a disk so the controller can be accessed | |
1968 | * by the Array Config Utility. | |
1969 | */ | |
1970 | static void cciss_add_controller_node(ctlr_info_t *h) | |
1971 | { | |
1972 | struct gendisk *disk; | |
1973 | int drv_index; | |
1974 | ||
1975 | if (h->gendisk[0] != NULL) /* already did this? Then bail. */ | |
1976 | return; | |
1977 | ||
39ccf9a6 | 1978 | drv_index = cciss_add_gendisk(h, CTLR_LUNID, 1); |
361e9b07 SC |
1979 | if (drv_index == -1) |
1980 | goto error; | |
6ae5ce8e MM |
1981 | h->drv[drv_index].block_size = 512; |
1982 | h->drv[drv_index].nr_blocks = 0; | |
1983 | h->drv[drv_index].heads = 0; | |
1984 | h->drv[drv_index].sectors = 0; | |
1985 | h->drv[drv_index].cylinders = 0; | |
1986 | h->drv[drv_index].raid_level = -1; | |
1987 | memset(h->drv[drv_index].serial_no, 0, 16); | |
1988 | disk = h->gendisk[drv_index]; | |
361e9b07 SC |
1989 | if (cciss_add_disk(h, disk, drv_index) == 0) |
1990 | return; | |
1991 | cciss_free_gendisk(h, drv_index); | |
1992 | error: | |
1993 | printk(KERN_WARNING "cciss%d: could not " | |
1994 | "add disk 0.\n", h->ctlr); | |
1995 | return; | |
6ae5ce8e MM |
1996 | } |
1997 | ||
ddd47442 | 1998 | /* This function will add and remove logical drives from the Logical |
d14c4ab5 | 1999 | * drive array of the controller and maintain persistency of ordering |
ddd47442 MM |
2000 | * so that mount points are preserved until the next reboot. This allows |
2001 | * for the removal of logical drives in the middle of the drive array | |
2002 | * without a re-ordering of those drives. | |
2003 | * INPUT | |
2004 | * h = The controller to perform the operations on | |
7c832835 | 2005 | */ |
2d11d993 SC |
2006 | static int rebuild_lun_table(ctlr_info_t *h, int first_time, |
2007 | int via_ioctl) | |
1da177e4 | 2008 | { |
ddd47442 MM |
2009 | int ctlr = h->ctlr; |
2010 | int num_luns; | |
2011 | ReportLunData_struct *ld_buff = NULL; | |
ddd47442 MM |
2012 | int return_code; |
2013 | int listlength = 0; | |
2014 | int i; | |
2015 | int drv_found; | |
2016 | int drv_index = 0; | |
39ccf9a6 | 2017 | unsigned char lunid[8] = CTLR_LUNID; |
1da177e4 | 2018 | unsigned long flags; |
ddd47442 | 2019 | |
6ae5ce8e MM |
2020 | if (!capable(CAP_SYS_RAWIO)) |
2021 | return -EPERM; | |
2022 | ||
ddd47442 MM |
2023 | /* Set busy_configuring flag for this operation */ |
2024 | spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); | |
7c832835 | 2025 | if (h->busy_configuring) { |
ddd47442 MM |
2026 | spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); |
2027 | return -EBUSY; | |
2028 | } | |
2029 | h->busy_configuring = 1; | |
a72da29b | 2030 | spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); |
ddd47442 | 2031 | |
a72da29b MM |
2032 | ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL); |
2033 | if (ld_buff == NULL) | |
2034 | goto mem_msg; | |
2035 | ||
2036 | return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff, | |
b57695fe | 2037 | sizeof(ReportLunData_struct), |
2038 | 0, CTLR_LUNID, TYPE_CMD); | |
ddd47442 | 2039 | |
a72da29b MM |
2040 | if (return_code == IO_OK) |
2041 | listlength = be32_to_cpu(*(__be32 *) ld_buff->LUNListLength); | |
2042 | else { /* reading number of logical volumes failed */ | |
2043 | printk(KERN_WARNING "cciss: report logical volume" | |
2044 | " command failed\n"); | |
2045 | listlength = 0; | |
2046 | goto freeret; | |
2047 | } | |
2048 | ||
2049 | num_luns = listlength / 8; /* 8 bytes per entry */ | |
2050 | if (num_luns > CISS_MAX_LUN) { | |
2051 | num_luns = CISS_MAX_LUN; | |
2052 | printk(KERN_WARNING "cciss: more luns configured" | |
2053 | " on controller than can be handled by" | |
2054 | " this driver.\n"); | |
2055 | } | |
2056 | ||
6ae5ce8e MM |
2057 | if (num_luns == 0) |
2058 | cciss_add_controller_node(h); | |
2059 | ||
2060 | /* Compare controller drive array to driver's drive array | |
2061 | * to see if any drives are missing on the controller due | |
2062 | * to action of Array Config Utility (user deletes drive) | |
2063 | * and deregister logical drives which have disappeared. | |
2064 | */ | |
a72da29b MM |
2065 | for (i = 0; i <= h->highest_lun; i++) { |
2066 | int j; | |
2067 | drv_found = 0; | |
d8a0be6a SC |
2068 | |
2069 | /* skip holes in the array from already deleted drives */ | |
2070 | if (h->drv[i].raid_level == -1) | |
2071 | continue; | |
2072 | ||
a72da29b | 2073 | for (j = 0; j < num_luns; j++) { |
39ccf9a6 SC |
2074 | memcpy(lunid, &ld_buff->LUN[j][0], sizeof(lunid)); |
2075 | if (memcmp(h->drv[i].LunID, lunid, | |
2076 | sizeof(lunid)) == 0) { | |
a72da29b MM |
2077 | drv_found = 1; |
2078 | break; | |
2079 | } | |
2080 | } | |
2081 | if (!drv_found) { | |
2082 | /* Deregister it from the OS, it's gone. */ | |
2083 | spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); | |
2084 | h->drv[i].busy_configuring = 1; | |
2085 | spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); | |
2d11d993 | 2086 | return_code = deregister_disk(h, i, 1, via_ioctl); |
a72da29b | 2087 | h->drv[i].busy_configuring = 0; |
ddd47442 | 2088 | } |
a72da29b | 2089 | } |
ddd47442 | 2090 | |
a72da29b MM |
2091 | /* Compare controller drive array to driver's drive array. |
2092 | * Check for updates in the drive information and any new drives | |
2093 | * on the controller due to ACU adding logical drives, or changing | |
2094 | * a logical drive's size, etc. Reregister any new/changed drives | |
2095 | */ | |
2096 | for (i = 0; i < num_luns; i++) { | |
2097 | int j; | |
ddd47442 | 2098 | |
a72da29b | 2099 | drv_found = 0; |
ddd47442 | 2100 | |
39ccf9a6 | 2101 | memcpy(lunid, &ld_buff->LUN[i][0], sizeof(lunid)); |
a72da29b MM |
2102 | /* Find if the LUN is already in the drive array |
2103 | * of the driver. If so then update its info | |
2104 | * if not in use. If it does not exist then find | |
2105 | * the first free index and add it. | |
2106 | */ | |
2107 | for (j = 0; j <= h->highest_lun; j++) { | |
2108 | if (h->drv[j].raid_level != -1 && | |
39ccf9a6 SC |
2109 | memcmp(h->drv[j].LunID, lunid, |
2110 | sizeof(h->drv[j].LunID)) == 0) { | |
a72da29b MM |
2111 | drv_index = j; |
2112 | drv_found = 1; | |
2113 | break; | |
ddd47442 | 2114 | } |
a72da29b | 2115 | } |
ddd47442 | 2116 | |
a72da29b MM |
2117 | /* check if the drive was found already in the array */ |
2118 | if (!drv_found) { | |
eece695f | 2119 | drv_index = cciss_add_gendisk(h, lunid, 0); |
a72da29b MM |
2120 | if (drv_index == -1) |
2121 | goto freeret; | |
a72da29b | 2122 | } |
2d11d993 SC |
2123 | cciss_update_drive_info(ctlr, drv_index, first_time, |
2124 | via_ioctl); | |
a72da29b | 2125 | } /* end for */ |
ddd47442 | 2126 | |
6ae5ce8e | 2127 | freeret: |
ddd47442 MM |
2128 | kfree(ld_buff); |
2129 | h->busy_configuring = 0; | |
2130 | /* We return -1 here to tell the ACU that we have registered/updated | |
2131 | * all of the drives that we can and to keep it from calling us | |
2132 | * additional times. | |
7c832835 | 2133 | */ |
ddd47442 | 2134 | return -1; |
6ae5ce8e | 2135 | mem_msg: |
ddd47442 | 2136 | printk(KERN_ERR "cciss: out of memory\n"); |
a72da29b | 2137 | h->busy_configuring = 0; |
ddd47442 MM |
2138 | goto freeret; |
2139 | } | |
2140 | ||
9ddb27b4 SC |
2141 | static void cciss_clear_drive_info(drive_info_struct *drive_info) |
2142 | { | |
2143 | /* zero out the disk size info */ | |
2144 | drive_info->nr_blocks = 0; | |
2145 | drive_info->block_size = 0; | |
2146 | drive_info->heads = 0; | |
2147 | drive_info->sectors = 0; | |
2148 | drive_info->cylinders = 0; | |
2149 | drive_info->raid_level = -1; | |
2150 | memset(drive_info->serial_no, 0, sizeof(drive_info->serial_no)); | |
2151 | memset(drive_info->model, 0, sizeof(drive_info->model)); | |
2152 | memset(drive_info->rev, 0, sizeof(drive_info->rev)); | |
2153 | memset(drive_info->vendor, 0, sizeof(drive_info->vendor)); | |
2154 | /* | |
2155 | * don't clear the LUNID though, we need to remember which | |
2156 | * one this one is. | |
2157 | */ | |
2158 | } | |
2159 | ||
ddd47442 MM |
2160 | /* This function will deregister the disk and it's queue from the |
2161 | * kernel. It must be called with the controller lock held and the | |
2162 | * drv structures busy_configuring flag set. It's parameters are: | |
2163 | * | |
2164 | * disk = This is the disk to be deregistered | |
2165 | * drv = This is the drive_info_struct associated with the disk to be | |
2166 | * deregistered. It contains information about the disk used | |
2167 | * by the driver. | |
2168 | * clear_all = This flag determines whether or not the disk information | |
2169 | * is going to be completely cleared out and the highest_lun | |
2170 | * reset. Sometimes we want to clear out information about | |
d14c4ab5 | 2171 | * the disk in preparation for re-adding it. In this case |
ddd47442 MM |
2172 | * the highest_lun should be left unchanged and the LunID |
2173 | * should not be cleared. | |
2d11d993 SC |
2174 | * via_ioctl |
2175 | * This indicates whether we've reached this path via ioctl. | |
2176 | * This affects the maximum usage count allowed for c0d0 to be messed with. | |
2177 | * If this path is reached via ioctl(), then the max_usage_count will | |
2178 | * be 1, as the process calling ioctl() has got to have the device open. | |
2179 | * If we get here via sysfs, then the max usage count will be zero. | |
ddd47442 | 2180 | */ |
a0ea8622 | 2181 | static int deregister_disk(ctlr_info_t *h, int drv_index, |
2d11d993 | 2182 | int clear_all, int via_ioctl) |
ddd47442 | 2183 | { |
799202cb | 2184 | int i; |
a0ea8622 SC |
2185 | struct gendisk *disk; |
2186 | drive_info_struct *drv; | |
1da177e4 LT |
2187 | |
2188 | if (!capable(CAP_SYS_RAWIO)) | |
2189 | return -EPERM; | |
2190 | ||
a0ea8622 SC |
2191 | drv = &h->drv[drv_index]; |
2192 | disk = h->gendisk[drv_index]; | |
2193 | ||
1da177e4 | 2194 | /* make sure logical volume is NOT is use */ |
7c832835 | 2195 | if (clear_all || (h->gendisk[0] == disk)) { |
2d11d993 | 2196 | if (drv->usage_count > via_ioctl) |
7c832835 BH |
2197 | return -EBUSY; |
2198 | } else if (drv->usage_count > 0) | |
2199 | return -EBUSY; | |
1da177e4 | 2200 | |
ddd47442 MM |
2201 | /* invalidate the devices and deregister the disk. If it is disk |
2202 | * zero do not deregister it but just zero out it's values. This | |
2203 | * allows us to delete disk zero but keep the controller registered. | |
7c832835 BH |
2204 | */ |
2205 | if (h->gendisk[0] != disk) { | |
5a9df732 | 2206 | struct request_queue *q = disk->queue; |
097d0264 | 2207 | if (disk->flags & GENHD_FL_UP) { |
8ce51966 | 2208 | cciss_destroy_ld_sysfs_entry(h, drv_index, 0); |
5a9df732 | 2209 | del_gendisk(disk); |
097d0264 | 2210 | } |
5a9df732 AB |
2211 | if (q) { |
2212 | blk_cleanup_queue(q); | |
2213 | /* Set drv->queue to NULL so that we do not try | |
2214 | * to call blk_start_queue on this queue in the | |
2215 | * interrupt handler | |
2216 | */ | |
2217 | drv->queue = NULL; | |
2218 | } | |
2219 | /* If clear_all is set then we are deleting the logical | |
2220 | * drive, not just refreshing its info. For drives | |
2221 | * other than disk 0 we will call put_disk. We do not | |
2222 | * do this for disk 0 as we need it to be able to | |
2223 | * configure the controller. | |
a72da29b | 2224 | */ |
5a9df732 AB |
2225 | if (clear_all){ |
2226 | /* This isn't pretty, but we need to find the | |
2227 | * disk in our array and NULL our the pointer. | |
2228 | * This is so that we will call alloc_disk if | |
2229 | * this index is used again later. | |
a72da29b | 2230 | */ |
5a9df732 | 2231 | for (i=0; i < CISS_MAX_LUN; i++){ |
a72da29b | 2232 | if (h->gendisk[i] == disk) { |
5a9df732 AB |
2233 | h->gendisk[i] = NULL; |
2234 | break; | |
799202cb | 2235 | } |
799202cb | 2236 | } |
5a9df732 | 2237 | put_disk(disk); |
ddd47442 | 2238 | } |
799202cb MM |
2239 | } else { |
2240 | set_capacity(disk, 0); | |
ddd47442 MM |
2241 | } |
2242 | ||
2243 | --h->num_luns; | |
9ddb27b4 SC |
2244 | cciss_clear_drive_info(drv); |
2245 | ||
7c832835 BH |
2246 | if (clear_all) { |
2247 | /* check to see if it was the last disk */ | |
2248 | if (drv == h->drv + h->highest_lun) { | |
2249 | /* if so, find the new hightest lun */ | |
2250 | int i, newhighest = -1; | |
a72da29b | 2251 | for (i = 0; i <= h->highest_lun; i++) { |
7c832835 | 2252 | /* if the disk has size > 0, it is available */ |
ddd47442 | 2253 | if (h->drv[i].heads) |
7c832835 BH |
2254 | newhighest = i; |
2255 | } | |
2256 | h->highest_lun = newhighest; | |
1da177e4 | 2257 | } |
39ccf9a6 | 2258 | memset(drv->LunID, 0, sizeof(drv->LunID)); |
ddd47442 | 2259 | } |
e2019b58 | 2260 | return 0; |
1da177e4 | 2261 | } |
ddd47442 | 2262 | |
b57695fe | 2263 | static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, |
2264 | size_t size, __u8 page_code, unsigned char *scsi3addr, | |
2265 | int cmd_type) | |
1da177e4 | 2266 | { |
7c832835 | 2267 | ctlr_info_t *h = hba[ctlr]; |
1da177e4 LT |
2268 | u64bit buff_dma_handle; |
2269 | int status = IO_OK; | |
2270 | ||
2271 | c->cmd_type = CMD_IOCTL_PEND; | |
2272 | c->Header.ReplyQueue = 0; | |
7c832835 | 2273 | if (buff != NULL) { |
1da177e4 | 2274 | c->Header.SGList = 1; |
7c832835 | 2275 | c->Header.SGTotal = 1; |
1da177e4 LT |
2276 | } else { |
2277 | c->Header.SGList = 0; | |
7c832835 | 2278 | c->Header.SGTotal = 0; |
1da177e4 LT |
2279 | } |
2280 | c->Header.Tag.lower = c->busaddr; | |
b57695fe | 2281 | memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8); |
1da177e4 LT |
2282 | |
2283 | c->Request.Type.Type = cmd_type; | |
2284 | if (cmd_type == TYPE_CMD) { | |
7c832835 BH |
2285 | switch (cmd) { |
2286 | case CISS_INQUIRY: | |
1da177e4 | 2287 | /* are we trying to read a vital product page */ |
7c832835 | 2288 | if (page_code != 0) { |
1da177e4 LT |
2289 | c->Request.CDB[1] = 0x01; |
2290 | c->Request.CDB[2] = page_code; | |
2291 | } | |
2292 | c->Request.CDBLen = 6; | |
7c832835 | 2293 | c->Request.Type.Attribute = ATTR_SIMPLE; |
1da177e4 LT |
2294 | c->Request.Type.Direction = XFER_READ; |
2295 | c->Request.Timeout = 0; | |
7c832835 BH |
2296 | c->Request.CDB[0] = CISS_INQUIRY; |
2297 | c->Request.CDB[4] = size & 0xFF; | |
2298 | break; | |
1da177e4 LT |
2299 | case CISS_REPORT_LOG: |
2300 | case CISS_REPORT_PHYS: | |
7c832835 | 2301 | /* Talking to controller so It's a physical command |
1da177e4 | 2302 | mode = 00 target = 0. Nothing to write. |
7c832835 | 2303 | */ |
1da177e4 LT |
2304 | c->Request.CDBLen = 12; |
2305 | c->Request.Type.Attribute = ATTR_SIMPLE; | |
2306 | c->Request.Type.Direction = XFER_READ; | |
2307 | c->Request.Timeout = 0; | |
2308 | c->Request.CDB[0] = cmd; | |
7c832835 | 2309 | c->Request.CDB[6] = (size >> 24) & 0xFF; //MSB |
1da177e4 LT |
2310 | c->Request.CDB[7] = (size >> 16) & 0xFF; |
2311 | c->Request.CDB[8] = (size >> 8) & 0xFF; | |
2312 | c->Request.CDB[9] = size & 0xFF; | |
2313 | break; | |
2314 | ||
2315 | case CCISS_READ_CAPACITY: | |
1da177e4 LT |
2316 | c->Request.CDBLen = 10; |
2317 | c->Request.Type.Attribute = ATTR_SIMPLE; | |
2318 | c->Request.Type.Direction = XFER_READ; | |
2319 | c->Request.Timeout = 0; | |
2320 | c->Request.CDB[0] = cmd; | |
7c832835 | 2321 | break; |
00988a35 | 2322 | case CCISS_READ_CAPACITY_16: |
00988a35 MMOD |
2323 | c->Request.CDBLen = 16; |
2324 | c->Request.Type.Attribute = ATTR_SIMPLE; | |
2325 | c->Request.Type.Direction = XFER_READ; | |
2326 | c->Request.Timeout = 0; | |
2327 | c->Request.CDB[0] = cmd; | |
2328 | c->Request.CDB[1] = 0x10; | |
2329 | c->Request.CDB[10] = (size >> 24) & 0xFF; | |
2330 | c->Request.CDB[11] = (size >> 16) & 0xFF; | |
2331 | c->Request.CDB[12] = (size >> 8) & 0xFF; | |
2332 | c->Request.CDB[13] = size & 0xFF; | |
2333 | c->Request.Timeout = 0; | |
2334 | c->Request.CDB[0] = cmd; | |
2335 | break; | |
1da177e4 LT |
2336 | case CCISS_CACHE_FLUSH: |
2337 | c->Request.CDBLen = 12; | |
2338 | c->Request.Type.Attribute = ATTR_SIMPLE; | |
2339 | c->Request.Type.Direction = XFER_WRITE; | |
2340 | c->Request.Timeout = 0; | |
2341 | c->Request.CDB[0] = BMIC_WRITE; | |
2342 | c->Request.CDB[6] = BMIC_CACHE_FLUSH; | |
7c832835 | 2343 | break; |
88f627ae | 2344 | case TEST_UNIT_READY: |
88f627ae SC |
2345 | c->Request.CDBLen = 6; |
2346 | c->Request.Type.Attribute = ATTR_SIMPLE; | |
2347 | c->Request.Type.Direction = XFER_NONE; | |
2348 | c->Request.Timeout = 0; | |
2349 | break; | |
1da177e4 LT |
2350 | default: |
2351 | printk(KERN_WARNING | |
7c832835 | 2352 | "cciss%d: Unknown Command 0x%c\n", ctlr, cmd); |
e2019b58 | 2353 | return IO_ERROR; |
1da177e4 LT |
2354 | } |
2355 | } else if (cmd_type == TYPE_MSG) { | |
2356 | switch (cmd) { | |
7c832835 | 2357 | case 0: /* ABORT message */ |
3da8b713 | 2358 | c->Request.CDBLen = 12; |
2359 | c->Request.Type.Attribute = ATTR_SIMPLE; | |
2360 | c->Request.Type.Direction = XFER_WRITE; | |
2361 | c->Request.Timeout = 0; | |
7c832835 BH |
2362 | c->Request.CDB[0] = cmd; /* abort */ |
2363 | c->Request.CDB[1] = 0; /* abort a command */ | |
3da8b713 | 2364 | /* buff contains the tag of the command to abort */ |
2365 | memcpy(&c->Request.CDB[4], buff, 8); | |
2366 | break; | |
7c832835 | 2367 | case 1: /* RESET message */ |
88f627ae | 2368 | c->Request.CDBLen = 16; |
3da8b713 | 2369 | c->Request.Type.Attribute = ATTR_SIMPLE; |
88f627ae | 2370 | c->Request.Type.Direction = XFER_NONE; |
3da8b713 | 2371 | c->Request.Timeout = 0; |
2372 | memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB)); | |
7c832835 | 2373 | c->Request.CDB[0] = cmd; /* reset */ |
88f627ae | 2374 | c->Request.CDB[1] = 0x03; /* reset a target */ |
00988a35 | 2375 | break; |
1da177e4 LT |
2376 | case 3: /* No-Op message */ |
2377 | c->Request.CDBLen = 1; | |
2378 | c->Request.Type.Attribute = ATTR_SIMPLE; | |
2379 | c->Request.Type.Direction = XFER_WRITE; | |
2380 | c->Request.Timeout = 0; | |
2381 | c->Request.CDB[0] = cmd; | |
2382 | break; | |
2383 | default: | |
2384 | printk(KERN_WARNING | |
7c832835 | 2385 | "cciss%d: unknown message type %d\n", ctlr, cmd); |
1da177e4 LT |
2386 | return IO_ERROR; |
2387 | } | |
2388 | } else { | |
2389 | printk(KERN_WARNING | |
7c832835 | 2390 | "cciss%d: unknown command type %d\n", ctlr, cmd_type); |
1da177e4 LT |
2391 | return IO_ERROR; |
2392 | } | |
2393 | /* Fill in the scatter gather information */ | |
2394 | if (size > 0) { | |
2395 | buff_dma_handle.val = (__u64) pci_map_single(h->pdev, | |
7c832835 BH |
2396 | buff, size, |
2397 | PCI_DMA_BIDIRECTIONAL); | |
1da177e4 LT |
2398 | c->SG[0].Addr.lower = buff_dma_handle.val32.lower; |
2399 | c->SG[0].Addr.upper = buff_dma_handle.val32.upper; | |
2400 | c->SG[0].Len = size; | |
7c832835 | 2401 | c->SG[0].Ext = 0; /* we are not chaining */ |
1da177e4 LT |
2402 | } |
2403 | return status; | |
2404 | } | |
7c832835 | 2405 | |
3c2ab402 | 2406 | static int check_target_status(ctlr_info_t *h, CommandList_struct *c) |
2407 | { | |
2408 | switch (c->err_info->ScsiStatus) { | |
2409 | case SAM_STAT_GOOD: | |
2410 | return IO_OK; | |
2411 | case SAM_STAT_CHECK_CONDITION: | |
2412 | switch (0xf & c->err_info->SenseInfo[2]) { | |
2413 | case 0: return IO_OK; /* no sense */ | |
2414 | case 1: return IO_OK; /* recovered error */ | |
2415 | default: | |
2416 | printk(KERN_WARNING "cciss%d: cmd 0x%02x " | |
2417 | "check condition, sense key = 0x%02x\n", | |
2418 | h->ctlr, c->Request.CDB[0], | |
2419 | c->err_info->SenseInfo[2]); | |
2420 | } | |
2421 | break; | |
2422 | default: | |
2423 | printk(KERN_WARNING "cciss%d: cmd 0x%02x" | |
2424 | "scsi status = 0x%02x\n", h->ctlr, | |
2425 | c->Request.CDB[0], c->err_info->ScsiStatus); | |
2426 | break; | |
2427 | } | |
2428 | return IO_ERROR; | |
2429 | } | |
2430 | ||
789a424a | 2431 | static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c) |
1da177e4 | 2432 | { |
5390cfc3 | 2433 | int return_status = IO_OK; |
7c832835 | 2434 | |
789a424a | 2435 | if (c->err_info->CommandStatus == CMD_SUCCESS) |
2436 | return IO_OK; | |
5390cfc3 | 2437 | |
2438 | switch (c->err_info->CommandStatus) { | |
2439 | case CMD_TARGET_STATUS: | |
3c2ab402 | 2440 | return_status = check_target_status(h, c); |
5390cfc3 | 2441 | break; |
2442 | case CMD_DATA_UNDERRUN: | |
2443 | case CMD_DATA_OVERRUN: | |
2444 | /* expected for inquiry and report lun commands */ | |
2445 | break; | |
2446 | case CMD_INVALID: | |
789a424a | 2447 | printk(KERN_WARNING "cciss: cmd 0x%02x is " |
5390cfc3 | 2448 | "reported invalid\n", c->Request.CDB[0]); |
2449 | return_status = IO_ERROR; | |
2450 | break; | |
2451 | case CMD_PROTOCOL_ERR: | |
2452 | printk(KERN_WARNING "cciss: cmd 0x%02x has " | |
2453 | "protocol error \n", c->Request.CDB[0]); | |
2454 | return_status = IO_ERROR; | |
2455 | break; | |
2456 | case CMD_HARDWARE_ERR: | |
2457 | printk(KERN_WARNING "cciss: cmd 0x%02x had " | |
2458 | " hardware error\n", c->Request.CDB[0]); | |
2459 | return_status = IO_ERROR; | |
2460 | break; | |
2461 | case CMD_CONNECTION_LOST: | |
2462 | printk(KERN_WARNING "cciss: cmd 0x%02x had " | |
2463 | "connection lost\n", c->Request.CDB[0]); | |
2464 | return_status = IO_ERROR; | |
2465 | break; | |
2466 | case CMD_ABORTED: | |
2467 | printk(KERN_WARNING "cciss: cmd 0x%02x was " | |
2468 | "aborted\n", c->Request.CDB[0]); | |
2469 | return_status = IO_ERROR; | |
2470 | break; | |
2471 | case CMD_ABORT_FAILED: | |
2472 | printk(KERN_WARNING "cciss: cmd 0x%02x reports " | |
2473 | "abort failed\n", c->Request.CDB[0]); | |
2474 | return_status = IO_ERROR; | |
2475 | break; | |
2476 | case CMD_UNSOLICITED_ABORT: | |
2477 | printk(KERN_WARNING | |
2478 | "cciss%d: unsolicited abort 0x%02x\n", h->ctlr, | |
2479 | c->Request.CDB[0]); | |
789a424a | 2480 | return_status = IO_NEEDS_RETRY; |
5390cfc3 | 2481 | break; |
2482 | default: | |
2483 | printk(KERN_WARNING "cciss: cmd 0x%02x returned " | |
2484 | "unknown status %x\n", c->Request.CDB[0], | |
2485 | c->err_info->CommandStatus); | |
2486 | return_status = IO_ERROR; | |
7c832835 | 2487 | } |
789a424a | 2488 | return return_status; |
2489 | } | |
2490 | ||
2491 | static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c, | |
2492 | int attempt_retry) | |
2493 | { | |
2494 | DECLARE_COMPLETION_ONSTACK(wait); | |
2495 | u64bit buff_dma_handle; | |
2496 | unsigned long flags; | |
2497 | int return_status = IO_OK; | |
2498 | ||
2499 | resend_cmd2: | |
2500 | c->waiting = &wait; | |
2501 | /* Put the request on the tail of the queue and send it */ | |
2502 | spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); | |
2503 | addQ(&h->reqQ, c); | |
2504 | h->Qdepth++; | |
2505 | start_io(h); | |
2506 | spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); | |
2507 | ||
2508 | wait_for_completion(&wait); | |
2509 | ||
2510 | if (c->err_info->CommandStatus == 0 || !attempt_retry) | |
2511 | goto command_done; | |
2512 | ||
2513 | return_status = process_sendcmd_error(h, c); | |
2514 | ||
2515 | if (return_status == IO_NEEDS_RETRY && | |
2516 | c->retry_count < MAX_CMD_RETRIES) { | |
2517 | printk(KERN_WARNING "cciss%d: retrying 0x%02x\n", h->ctlr, | |
2518 | c->Request.CDB[0]); | |
2519 | c->retry_count++; | |
2520 | /* erase the old error information */ | |
2521 | memset(c->err_info, 0, sizeof(ErrorInfo_struct)); | |
2522 | return_status = IO_OK; | |
2523 | INIT_COMPLETION(wait); | |
2524 | goto resend_cmd2; | |
2525 | } | |
5390cfc3 | 2526 | |
2527 | command_done: | |
1da177e4 | 2528 | /* unlock the buffers from DMA */ |
bb2a37bf MM |
2529 | buff_dma_handle.val32.lower = c->SG[0].Addr.lower; |
2530 | buff_dma_handle.val32.upper = c->SG[0].Addr.upper; | |
7c832835 BH |
2531 | pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val, |
2532 | c->SG[0].Len, PCI_DMA_BIDIRECTIONAL); | |
5390cfc3 | 2533 | return return_status; |
2534 | } | |
2535 | ||
b57695fe | 2536 | static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size, |
2537 | __u8 page_code, unsigned char scsi3addr[], | |
2538 | int cmd_type) | |
5390cfc3 | 2539 | { |
2540 | ctlr_info_t *h = hba[ctlr]; | |
2541 | CommandList_struct *c; | |
2542 | int return_status; | |
2543 | ||
2544 | c = cmd_alloc(h, 0); | |
2545 | if (!c) | |
2546 | return -ENOMEM; | |
b57695fe | 2547 | return_status = fill_cmd(c, cmd, ctlr, buff, size, page_code, |
2548 | scsi3addr, cmd_type); | |
5390cfc3 | 2549 | if (return_status == IO_OK) |
789a424a | 2550 | return_status = sendcmd_withirq_core(h, c, 1); |
2551 | ||
1da177e4 | 2552 | cmd_free(h, c, 0); |
7c832835 | 2553 | return return_status; |
1da177e4 | 2554 | } |
7c832835 | 2555 | |
1da177e4 | 2556 | static void cciss_geometry_inquiry(int ctlr, int logvol, |
00988a35 | 2557 | int withirq, sector_t total_size, |
7c832835 BH |
2558 | unsigned int block_size, |
2559 | InquiryData_struct *inq_buff, | |
2560 | drive_info_struct *drv) | |
1da177e4 LT |
2561 | { |
2562 | int return_code; | |
00988a35 | 2563 | unsigned long t; |
b57695fe | 2564 | unsigned char scsi3addr[8]; |
00988a35 | 2565 | |
1da177e4 | 2566 | memset(inq_buff, 0, sizeof(InquiryData_struct)); |
b57695fe | 2567 | log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol); |
1da177e4 LT |
2568 | if (withirq) |
2569 | return_code = sendcmd_withirq(CISS_INQUIRY, ctlr, | |
b57695fe | 2570 | inq_buff, sizeof(*inq_buff), |
2571 | 0xC1, scsi3addr, TYPE_CMD); | |
1da177e4 LT |
2572 | else |
2573 | return_code = sendcmd(CISS_INQUIRY, ctlr, inq_buff, | |
b57695fe | 2574 | sizeof(*inq_buff), 0xC1, scsi3addr, |
7c832835 | 2575 | TYPE_CMD); |
1da177e4 | 2576 | if (return_code == IO_OK) { |
7c832835 | 2577 | if (inq_buff->data_byte[8] == 0xFF) { |
1da177e4 | 2578 | printk(KERN_WARNING |
7c832835 BH |
2579 | "cciss: reading geometry failed, volume " |
2580 | "does not support reading geometry\n"); | |
1da177e4 | 2581 | drv->heads = 255; |
7c832835 | 2582 | drv->sectors = 32; // Sectors per track |
7f42d3b8 | 2583 | drv->cylinders = total_size + 1; |
89f97ad1 | 2584 | drv->raid_level = RAID_UNKNOWN; |
1da177e4 | 2585 | } else { |
1da177e4 LT |
2586 | drv->heads = inq_buff->data_byte[6]; |
2587 | drv->sectors = inq_buff->data_byte[7]; | |
2588 | drv->cylinders = (inq_buff->data_byte[4] & 0xff) << 8; | |
2589 | drv->cylinders += inq_buff->data_byte[5]; | |
2590 | drv->raid_level = inq_buff->data_byte[8]; | |
3f7705ea MW |
2591 | } |
2592 | drv->block_size = block_size; | |
97c06978 | 2593 | drv->nr_blocks = total_size + 1; |
3f7705ea MW |
2594 | t = drv->heads * drv->sectors; |
2595 | if (t > 1) { | |
97c06978 MMOD |
2596 | sector_t real_size = total_size + 1; |
2597 | unsigned long rem = sector_div(real_size, t); | |
3f7705ea | 2598 | if (rem) |
97c06978 MMOD |
2599 | real_size++; |
2600 | drv->cylinders = real_size; | |
1da177e4 | 2601 | } |
7c832835 | 2602 | } else { /* Get geometry failed */ |
1da177e4 LT |
2603 | printk(KERN_WARNING "cciss: reading geometry failed\n"); |
2604 | } | |
1da177e4 | 2605 | } |
7c832835 | 2606 | |
1da177e4 | 2607 | static void |
00988a35 | 2608 | cciss_read_capacity(int ctlr, int logvol, int withirq, sector_t *total_size, |
7c832835 | 2609 | unsigned int *block_size) |
1da177e4 | 2610 | { |
00988a35 | 2611 | ReadCapdata_struct *buf; |
1da177e4 | 2612 | int return_code; |
b57695fe | 2613 | unsigned char scsi3addr[8]; |
1aebe187 MK |
2614 | |
2615 | buf = kzalloc(sizeof(ReadCapdata_struct), GFP_KERNEL); | |
2616 | if (!buf) { | |
00988a35 MMOD |
2617 | printk(KERN_WARNING "cciss: out of memory\n"); |
2618 | return; | |
2619 | } | |
1aebe187 | 2620 | |
b57695fe | 2621 | log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol); |
1da177e4 LT |
2622 | if (withirq) |
2623 | return_code = sendcmd_withirq(CCISS_READ_CAPACITY, | |
00988a35 | 2624 | ctlr, buf, sizeof(ReadCapdata_struct), |
b57695fe | 2625 | 0, scsi3addr, TYPE_CMD); |
1da177e4 LT |
2626 | else |
2627 | return_code = sendcmd(CCISS_READ_CAPACITY, | |
00988a35 | 2628 | ctlr, buf, sizeof(ReadCapdata_struct), |
b57695fe | 2629 | 0, scsi3addr, TYPE_CMD); |
1da177e4 | 2630 | if (return_code == IO_OK) { |
4c1f2b31 AV |
2631 | *total_size = be32_to_cpu(*(__be32 *) buf->total_size); |
2632 | *block_size = be32_to_cpu(*(__be32 *) buf->block_size); | |
7c832835 | 2633 | } else { /* read capacity command failed */ |
1da177e4 LT |
2634 | printk(KERN_WARNING "cciss: read capacity failed\n"); |
2635 | *total_size = 0; | |
2636 | *block_size = BLOCK_SIZE; | |
2637 | } | |
00988a35 | 2638 | kfree(buf); |
00988a35 MMOD |
2639 | } |
2640 | ||
2641 | static void | |
2642 | cciss_read_capacity_16(int ctlr, int logvol, int withirq, sector_t *total_size, unsigned int *block_size) | |
2643 | { | |
2644 | ReadCapdata_struct_16 *buf; | |
2645 | int return_code; | |
b57695fe | 2646 | unsigned char scsi3addr[8]; |
1aebe187 MK |
2647 | |
2648 | buf = kzalloc(sizeof(ReadCapdata_struct_16), GFP_KERNEL); | |
2649 | if (!buf) { | |
00988a35 MMOD |
2650 | printk(KERN_WARNING "cciss: out of memory\n"); |
2651 | return; | |
2652 | } | |
1aebe187 | 2653 | |
b57695fe | 2654 | log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol); |
00988a35 MMOD |
2655 | if (withirq) { |
2656 | return_code = sendcmd_withirq(CCISS_READ_CAPACITY_16, | |
2657 | ctlr, buf, sizeof(ReadCapdata_struct_16), | |
b57695fe | 2658 | 0, scsi3addr, TYPE_CMD); |
00988a35 MMOD |
2659 | } |
2660 | else { | |
2661 | return_code = sendcmd(CCISS_READ_CAPACITY_16, | |
2662 | ctlr, buf, sizeof(ReadCapdata_struct_16), | |
b57695fe | 2663 | 0, scsi3addr, TYPE_CMD); |
00988a35 MMOD |
2664 | } |
2665 | if (return_code == IO_OK) { | |
4c1f2b31 AV |
2666 | *total_size = be64_to_cpu(*(__be64 *) buf->total_size); |
2667 | *block_size = be32_to_cpu(*(__be32 *) buf->block_size); | |
00988a35 MMOD |
2668 | } else { /* read capacity command failed */ |
2669 | printk(KERN_WARNING "cciss: read capacity failed\n"); | |
2670 | *total_size = 0; | |
2671 | *block_size = BLOCK_SIZE; | |
2672 | } | |
7b92aadf | 2673 | printk(KERN_INFO " blocks= %llu block_size= %d\n", |
97c06978 | 2674 | (unsigned long long)*total_size+1, *block_size); |
00988a35 | 2675 | kfree(buf); |
1da177e4 LT |
2676 | } |
2677 | ||
1da177e4 LT |
2678 | static int cciss_revalidate(struct gendisk *disk) |
2679 | { | |
2680 | ctlr_info_t *h = get_host(disk); | |
2681 | drive_info_struct *drv = get_drv(disk); | |
2682 | int logvol; | |
7c832835 | 2683 | int FOUND = 0; |
1da177e4 | 2684 | unsigned int block_size; |
00988a35 | 2685 | sector_t total_size; |
1da177e4 LT |
2686 | InquiryData_struct *inq_buff = NULL; |
2687 | ||
7c832835 | 2688 | for (logvol = 0; logvol < CISS_MAX_LUN; logvol++) { |
39ccf9a6 SC |
2689 | if (memcmp(h->drv[logvol].LunID, drv->LunID, |
2690 | sizeof(drv->LunID)) == 0) { | |
7c832835 | 2691 | FOUND = 1; |
1da177e4 LT |
2692 | break; |
2693 | } | |
2694 | } | |
2695 | ||
7c832835 BH |
2696 | if (!FOUND) |
2697 | return 1; | |
1da177e4 | 2698 | |
7c832835 BH |
2699 | inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL); |
2700 | if (inq_buff == NULL) { | |
2701 | printk(KERN_WARNING "cciss: out of memory\n"); | |
7c832835 BH |
2702 | return 1; |
2703 | } | |
00988a35 MMOD |
2704 | if (h->cciss_read == CCISS_READ_10) { |
2705 | cciss_read_capacity(h->ctlr, logvol, 1, | |
2706 | &total_size, &block_size); | |
2707 | } else { | |
2708 | cciss_read_capacity_16(h->ctlr, logvol, 1, | |
2709 | &total_size, &block_size); | |
2710 | } | |
7c832835 BH |
2711 | cciss_geometry_inquiry(h->ctlr, logvol, 1, total_size, block_size, |
2712 | inq_buff, drv); | |
1da177e4 | 2713 | |
e1defc4f | 2714 | blk_queue_logical_block_size(drv->queue, drv->block_size); |
1da177e4 LT |
2715 | set_capacity(disk, drv->nr_blocks); |
2716 | ||
1da177e4 LT |
2717 | kfree(inq_buff); |
2718 | return 0; | |
2719 | } | |
2720 | ||
2721 | /* | |
2722 | * Wait polling for a command to complete. | |
2723 | * The memory mapped FIFO is polled for the completion. | |
2724 | * Used only at init time, interrupts from the HBA are disabled. | |
2725 | */ | |
2726 | static unsigned long pollcomplete(int ctlr) | |
2727 | { | |
2728 | unsigned long done; | |
2729 | int i; | |
2730 | ||
2731 | /* Wait (up to 20 seconds) for a command to complete */ | |
2732 | ||
2733 | for (i = 20 * HZ; i > 0; i--) { | |
2734 | done = hba[ctlr]->access.command_completed(hba[ctlr]); | |
86e84862 NA |
2735 | if (done == FIFO_EMPTY) |
2736 | schedule_timeout_uninterruptible(1); | |
2737 | else | |
e2019b58 | 2738 | return done; |
1da177e4 LT |
2739 | } |
2740 | /* Invalid address to tell caller we ran out of time */ | |
2741 | return 1; | |
2742 | } | |
3da8b713 | 2743 | |
4a4b2d76 SC |
2744 | /* Send command c to controller h and poll for it to complete. |
2745 | * Turns interrupts off on the board. Used at driver init time | |
2746 | * and during SCSI error recovery. | |
1da177e4 | 2747 | */ |
4a4b2d76 | 2748 | static int sendcmd_core(ctlr_info_t *h, CommandList_struct *c) |
1da177e4 | 2749 | { |
1da177e4 LT |
2750 | int i; |
2751 | unsigned long complete; | |
4a4b2d76 | 2752 | int status = IO_ERROR; |
1da177e4 | 2753 | u64bit buff_dma_handle; |
1da177e4 | 2754 | |
4a4b2d76 SC |
2755 | resend_cmd1: |
2756 | ||
2757 | /* Disable interrupt on the board. */ | |
2758 | h->access.set_intr_mask(h, CCISS_INTR_OFF); | |
7c832835 | 2759 | |
1da177e4 | 2760 | /* Make sure there is room in the command FIFO */ |
7c832835 | 2761 | /* Actually it should be completely empty at this time */ |
3da8b713 | 2762 | /* unless we are in here doing error handling for the scsi */ |
2763 | /* tape side of the driver. */ | |
7c832835 | 2764 | for (i = 200000; i > 0; i--) { |
1da177e4 | 2765 | /* if fifo isn't full go */ |
4a4b2d76 | 2766 | if (!(h->access.fifo_full(h))) |
7c832835 | 2767 | break; |
7c832835 BH |
2768 | udelay(10); |
2769 | printk(KERN_WARNING "cciss cciss%d: SendCmd FIFO full," | |
4a4b2d76 | 2770 | " waiting!\n", h->ctlr); |
7c832835 | 2771 | } |
4a4b2d76 | 2772 | h->access.submit_command(h, c); /* Send the cmd */ |
3da8b713 | 2773 | do { |
4a4b2d76 | 2774 | complete = pollcomplete(h->ctlr); |
1da177e4 LT |
2775 | |
2776 | #ifdef CCISS_DEBUG | |
3da8b713 | 2777 | printk(KERN_DEBUG "cciss: command completed\n"); |
7c832835 | 2778 | #endif /* CCISS_DEBUG */ |
1da177e4 | 2779 | |
3da8b713 | 2780 | if (complete == 1) { |
7c832835 BH |
2781 | printk(KERN_WARNING |
2782 | "cciss cciss%d: SendCmd Timeout out, " | |
4a4b2d76 | 2783 | "No command list address returned!\n", h->ctlr); |
3da8b713 | 2784 | status = IO_ERROR; |
3da8b713 | 2785 | break; |
2786 | } | |
2787 | ||
72f9f132 | 2788 | /* Make sure it's the command we're expecting. */ |
4a4b2d76 | 2789 | if ((complete & ~CISS_ERROR_BIT) != c->busaddr) { |
72f9f132 | 2790 | printk(KERN_WARNING "cciss%d: Unexpected command " |
2791 | "completion.\n", h->ctlr); | |
4a4b2d76 SC |
2792 | continue; |
2793 | } | |
2794 | ||
2795 | /* It is our command. If no error, we're done. */ | |
2796 | if (!(complete & CISS_ERROR_BIT)) { | |
2797 | status = IO_OK; | |
2798 | break; | |
2799 | } | |
2800 | ||
2801 | /* There is an error... */ | |
2802 | ||
2803 | /* if data overrun or underun on Report command ignore it */ | |
2804 | if (((c->Request.CDB[0] == CISS_REPORT_LOG) || | |
2805 | (c->Request.CDB[0] == CISS_REPORT_PHYS) || | |
2806 | (c->Request.CDB[0] == CISS_INQUIRY)) && | |
2807 | ((c->err_info->CommandStatus == CMD_DATA_OVERRUN) || | |
2808 | (c->err_info->CommandStatus == CMD_DATA_UNDERRUN))) { | |
2809 | complete = c->busaddr; | |
2810 | status = IO_OK; | |
2811 | break; | |
1da177e4 | 2812 | } |
4a4b2d76 SC |
2813 | |
2814 | if (c->err_info->CommandStatus == CMD_UNSOLICITED_ABORT) { | |
2815 | printk(KERN_WARNING "cciss%d: unsolicited abort %p\n", | |
2816 | h->ctlr, c); | |
2817 | if (c->retry_count < MAX_CMD_RETRIES) { | |
2818 | printk(KERN_WARNING "cciss%d: retrying %p\n", | |
2819 | h->ctlr, c); | |
2820 | c->retry_count++; | |
2821 | /* erase the old error information */ | |
2822 | memset(c->err_info, 0, sizeof(c->err_info)); | |
2823 | goto resend_cmd1; | |
3da8b713 | 2824 | } |
4a4b2d76 SC |
2825 | printk(KERN_WARNING "cciss%d: retried %p too many " |
2826 | "times\n", h->ctlr, c); | |
2827 | status = IO_ERROR; | |
3c2ab402 | 2828 | break; |
4a4b2d76 SC |
2829 | } |
2830 | ||
2831 | if (c->err_info->CommandStatus == CMD_UNABORTABLE) { | |
2832 | printk(KERN_WARNING "cciss%d: command could not be " | |
2833 | "aborted.\n", h->ctlr); | |
2834 | status = IO_ERROR; | |
3c2ab402 | 2835 | break; |
4a4b2d76 SC |
2836 | } |
2837 | ||
4a4b2d76 | 2838 | if (c->err_info->CommandStatus == CMD_TARGET_STATUS) { |
3c2ab402 | 2839 | status = check_target_status(h, c); |
2840 | break; | |
4a4b2d76 SC |
2841 | } |
2842 | ||
3c2ab402 | 2843 | printk(KERN_WARNING "cciss%d: sendcmd error\n", h->ctlr); |
2844 | printk(KERN_WARNING "cmd = 0x%02x, CommandStatus = 0x%02x\n", | |
2845 | c->Request.CDB[0], c->err_info->CommandStatus); | |
4a4b2d76 | 2846 | status = IO_ERROR; |
3c2ab402 | 2847 | break; |
4a4b2d76 SC |
2848 | |
2849 | } while (1); | |
7c832835 | 2850 | |
1da177e4 | 2851 | /* unlock the data buffer from DMA */ |
bb2a37bf MM |
2852 | buff_dma_handle.val32.lower = c->SG[0].Addr.lower; |
2853 | buff_dma_handle.val32.upper = c->SG[0].Addr.upper; | |
4a4b2d76 | 2854 | pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val, |
7c832835 | 2855 | c->SG[0].Len, PCI_DMA_BIDIRECTIONAL); |
4a4b2d76 SC |
2856 | return status; |
2857 | } | |
2858 | ||
2859 | /* | |
2860 | * Send a command to the controller, and wait for it to complete. | |
2861 | * Used at init time, and during SCSI error recovery. | |
2862 | */ | |
2863 | static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, | |
4a4b2d76 SC |
2864 | __u8 page_code, unsigned char *scsi3addr, int cmd_type) |
2865 | { | |
2866 | CommandList_struct *c; | |
2867 | int status; | |
2868 | ||
2869 | c = cmd_alloc(hba[ctlr], 1); | |
2870 | if (!c) { | |
2871 | printk(KERN_WARNING "cciss: unable to get memory"); | |
2872 | return IO_ERROR; | |
2873 | } | |
b57695fe | 2874 | status = fill_cmd(c, cmd, ctlr, buff, size, page_code, |
2875 | scsi3addr, cmd_type); | |
4a4b2d76 SC |
2876 | if (status == IO_OK) |
2877 | status = sendcmd_core(hba[ctlr], c); | |
2878 | cmd_free(hba[ctlr], c, 1); | |
e2019b58 | 2879 | return status; |
7c832835 BH |
2880 | } |
2881 | ||
1da177e4 LT |
2882 | /* |
2883 | * Map (physical) PCI mem into (virtual) kernel space | |
2884 | */ | |
2885 | static void __iomem *remap_pci_mem(ulong base, ulong size) | |
2886 | { | |
7c832835 BH |
2887 | ulong page_base = ((ulong) base) & PAGE_MASK; |
2888 | ulong page_offs = ((ulong) base) - page_base; | |
2889 | void __iomem *page_remapped = ioremap(page_base, page_offs + size); | |
1da177e4 | 2890 | |
7c832835 | 2891 | return page_remapped ? (page_remapped + page_offs) : NULL; |
1da177e4 LT |
2892 | } |
2893 | ||
7c832835 BH |
2894 | /* |
2895 | * Takes jobs of the Q and sends them to the hardware, then puts it on | |
2896 | * the Q to wait for completion. | |
2897 | */ | |
2898 | static void start_io(ctlr_info_t *h) | |
1da177e4 LT |
2899 | { |
2900 | CommandList_struct *c; | |
7c832835 | 2901 | |
8a3173de JA |
2902 | while (!hlist_empty(&h->reqQ)) { |
2903 | c = hlist_entry(h->reqQ.first, CommandList_struct, list); | |
1da177e4 LT |
2904 | /* can't do anything if fifo is full */ |
2905 | if ((h->access.fifo_full(h))) { | |
2906 | printk(KERN_WARNING "cciss: fifo full\n"); | |
2907 | break; | |
2908 | } | |
2909 | ||
7c832835 | 2910 | /* Get the first entry from the Request Q */ |
8a3173de | 2911 | removeQ(c); |
1da177e4 | 2912 | h->Qdepth--; |
7c832835 BH |
2913 | |
2914 | /* Tell the controller execute command */ | |
1da177e4 | 2915 | h->access.submit_command(h, c); |
7c832835 BH |
2916 | |
2917 | /* Put job onto the completed Q */ | |
8a3173de | 2918 | addQ(&h->cmpQ, c); |
1da177e4 LT |
2919 | } |
2920 | } | |
7c832835 | 2921 | |
1da177e4 LT |
2922 | /* Assumes that CCISS_LOCK(h->ctlr) is held. */ |
2923 | /* Zeros out the error record and then resends the command back */ | |
2924 | /* to the controller */ | |
7c832835 | 2925 | static inline void resend_cciss_cmd(ctlr_info_t *h, CommandList_struct *c) |
1da177e4 LT |
2926 | { |
2927 | /* erase the old error information */ | |
2928 | memset(c->err_info, 0, sizeof(ErrorInfo_struct)); | |
2929 | ||
2930 | /* add it to software queue and then send it to the controller */ | |
8a3173de | 2931 | addQ(&h->reqQ, c); |
1da177e4 | 2932 | h->Qdepth++; |
7c832835 | 2933 | if (h->Qdepth > h->maxQsinceinit) |
1da177e4 LT |
2934 | h->maxQsinceinit = h->Qdepth; |
2935 | ||
2936 | start_io(h); | |
2937 | } | |
a9925a06 | 2938 | |
1a614f50 SC |
2939 | static inline unsigned int make_status_bytes(unsigned int scsi_status_byte, |
2940 | unsigned int msg_byte, unsigned int host_byte, | |
2941 | unsigned int driver_byte) | |
2942 | { | |
2943 | /* inverse of macros in scsi.h */ | |
2944 | return (scsi_status_byte & 0xff) | | |
2945 | ((msg_byte & 0xff) << 8) | | |
2946 | ((host_byte & 0xff) << 16) | | |
2947 | ((driver_byte & 0xff) << 24); | |
2948 | } | |
2949 | ||
0a9279cc MM |
2950 | static inline int evaluate_target_status(ctlr_info_t *h, |
2951 | CommandList_struct *cmd, int *retry_cmd) | |
03bbfee5 MMOD |
2952 | { |
2953 | unsigned char sense_key; | |
1a614f50 SC |
2954 | unsigned char status_byte, msg_byte, host_byte, driver_byte; |
2955 | int error_value; | |
2956 | ||
0a9279cc | 2957 | *retry_cmd = 0; |
1a614f50 SC |
2958 | /* If we get in here, it means we got "target status", that is, scsi status */ |
2959 | status_byte = cmd->err_info->ScsiStatus; | |
2960 | driver_byte = DRIVER_OK; | |
2961 | msg_byte = cmd->err_info->CommandStatus; /* correct? seems too device specific */ | |
2962 | ||
2963 | if (blk_pc_request(cmd->rq)) | |
2964 | host_byte = DID_PASSTHROUGH; | |
2965 | else | |
2966 | host_byte = DID_OK; | |
2967 | ||
2968 | error_value = make_status_bytes(status_byte, msg_byte, | |
2969 | host_byte, driver_byte); | |
03bbfee5 | 2970 | |
1a614f50 | 2971 | if (cmd->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) { |
03bbfee5 MMOD |
2972 | if (!blk_pc_request(cmd->rq)) |
2973 | printk(KERN_WARNING "cciss: cmd %p " | |
2974 | "has SCSI Status 0x%x\n", | |
2975 | cmd, cmd->err_info->ScsiStatus); | |
1a614f50 | 2976 | return error_value; |
03bbfee5 MMOD |
2977 | } |
2978 | ||
2979 | /* check the sense key */ | |
2980 | sense_key = 0xf & cmd->err_info->SenseInfo[2]; | |
2981 | /* no status or recovered error */ | |
1a614f50 SC |
2982 | if (((sense_key == 0x0) || (sense_key == 0x1)) && !blk_pc_request(cmd->rq)) |
2983 | error_value = 0; | |
03bbfee5 | 2984 | |
0a9279cc MM |
2985 | if (check_for_unit_attention(h, cmd)) { |
2986 | *retry_cmd = !blk_pc_request(cmd->rq); | |
2987 | return 0; | |
2988 | } | |
2989 | ||
03bbfee5 | 2990 | if (!blk_pc_request(cmd->rq)) { /* Not SG_IO or similar? */ |
1a614f50 | 2991 | if (error_value != 0) |
03bbfee5 MMOD |
2992 | printk(KERN_WARNING "cciss: cmd %p has CHECK CONDITION" |
2993 | " sense key = 0x%x\n", cmd, sense_key); | |
1a614f50 | 2994 | return error_value; |
03bbfee5 MMOD |
2995 | } |
2996 | ||
2997 | /* SG_IO or similar, copy sense data back */ | |
2998 | if (cmd->rq->sense) { | |
2999 | if (cmd->rq->sense_len > cmd->err_info->SenseLen) | |
3000 | cmd->rq->sense_len = cmd->err_info->SenseLen; | |
3001 | memcpy(cmd->rq->sense, cmd->err_info->SenseInfo, | |
3002 | cmd->rq->sense_len); | |
3003 | } else | |
3004 | cmd->rq->sense_len = 0; | |
3005 | ||
1a614f50 | 3006 | return error_value; |
03bbfee5 MMOD |
3007 | } |
3008 | ||
7c832835 | 3009 | /* checks the status of the job and calls complete buffers to mark all |
a9925a06 JA |
3010 | * buffers for the completed job. Note that this function does not need |
3011 | * to hold the hba/queue lock. | |
7c832835 BH |
3012 | */ |
3013 | static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd, | |
3014 | int timeout) | |
1da177e4 | 3015 | { |
1da177e4 | 3016 | int retry_cmd = 0; |
198b7660 MMOD |
3017 | struct request *rq = cmd->rq; |
3018 | ||
3019 | rq->errors = 0; | |
7c832835 | 3020 | |
1da177e4 | 3021 | if (timeout) |
1a614f50 | 3022 | rq->errors = make_status_bytes(0, 0, 0, DRIVER_TIMEOUT); |
1da177e4 | 3023 | |
d38ae168 MMOD |
3024 | if (cmd->err_info->CommandStatus == 0) /* no error has occurred */ |
3025 | goto after_error_processing; | |
7c832835 | 3026 | |
d38ae168 | 3027 | switch (cmd->err_info->CommandStatus) { |
d38ae168 | 3028 | case CMD_TARGET_STATUS: |
0a9279cc | 3029 | rq->errors = evaluate_target_status(h, cmd, &retry_cmd); |
d38ae168 MMOD |
3030 | break; |
3031 | case CMD_DATA_UNDERRUN: | |
03bbfee5 MMOD |
3032 | if (blk_fs_request(cmd->rq)) { |
3033 | printk(KERN_WARNING "cciss: cmd %p has" | |
3034 | " completed with data underrun " | |
3035 | "reported\n", cmd); | |
c3a4d78c | 3036 | cmd->rq->resid_len = cmd->err_info->ResidualCnt; |
03bbfee5 | 3037 | } |
d38ae168 MMOD |
3038 | break; |
3039 | case CMD_DATA_OVERRUN: | |
03bbfee5 MMOD |
3040 | if (blk_fs_request(cmd->rq)) |
3041 | printk(KERN_WARNING "cciss: cmd %p has" | |
3042 | " completed with data overrun " | |
3043 | "reported\n", cmd); | |
d38ae168 MMOD |
3044 | break; |
3045 | case CMD_INVALID: | |
3046 | printk(KERN_WARNING "cciss: cmd %p is " | |
3047 | "reported invalid\n", cmd); | |
1a614f50 SC |
3048 | rq->errors = make_status_bytes(SAM_STAT_GOOD, |
3049 | cmd->err_info->CommandStatus, DRIVER_OK, | |
3050 | blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR); | |
d38ae168 MMOD |
3051 | break; |
3052 | case CMD_PROTOCOL_ERR: | |
3053 | printk(KERN_WARNING "cciss: cmd %p has " | |
3054 | "protocol error \n", cmd); | |
1a614f50 SC |
3055 | rq->errors = make_status_bytes(SAM_STAT_GOOD, |
3056 | cmd->err_info->CommandStatus, DRIVER_OK, | |
3057 | blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR); | |
d38ae168 MMOD |
3058 | break; |
3059 | case CMD_HARDWARE_ERR: | |
3060 | printk(KERN_WARNING "cciss: cmd %p had " | |
3061 | " hardware error\n", cmd); | |
1a614f50 SC |
3062 | rq->errors = make_status_bytes(SAM_STAT_GOOD, |
3063 | cmd->err_info->CommandStatus, DRIVER_OK, | |
3064 | blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR); | |
d38ae168 MMOD |
3065 | break; |
3066 | case CMD_CONNECTION_LOST: | |
3067 | printk(KERN_WARNING "cciss: cmd %p had " | |
3068 | "connection lost\n", cmd); | |
1a614f50 SC |
3069 | rq->errors = make_status_bytes(SAM_STAT_GOOD, |
3070 | cmd->err_info->CommandStatus, DRIVER_OK, | |
3071 | blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR); | |
d38ae168 MMOD |
3072 | break; |
3073 | case CMD_ABORTED: | |
3074 | printk(KERN_WARNING "cciss: cmd %p was " | |
3075 | "aborted\n", cmd); | |
1a614f50 SC |
3076 | rq->errors = make_status_bytes(SAM_STAT_GOOD, |
3077 | cmd->err_info->CommandStatus, DRIVER_OK, | |
3078 | blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ABORT); | |
d38ae168 MMOD |
3079 | break; |
3080 | case CMD_ABORT_FAILED: | |
3081 | printk(KERN_WARNING "cciss: cmd %p reports " | |
3082 | "abort failed\n", cmd); | |
1a614f50 SC |
3083 | rq->errors = make_status_bytes(SAM_STAT_GOOD, |
3084 | cmd->err_info->CommandStatus, DRIVER_OK, | |
3085 | blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR); | |
d38ae168 MMOD |
3086 | break; |
3087 | case CMD_UNSOLICITED_ABORT: | |
3088 | printk(KERN_WARNING "cciss%d: unsolicited " | |
3089 | "abort %p\n", h->ctlr, cmd); | |
3090 | if (cmd->retry_count < MAX_CMD_RETRIES) { | |
3091 | retry_cmd = 1; | |
3092 | printk(KERN_WARNING | |
3093 | "cciss%d: retrying %p\n", h->ctlr, cmd); | |
3094 | cmd->retry_count++; | |
3095 | } else | |
3096 | printk(KERN_WARNING | |
3097 | "cciss%d: %p retried too " | |
3098 | "many times\n", h->ctlr, cmd); | |
1a614f50 SC |
3099 | rq->errors = make_status_bytes(SAM_STAT_GOOD, |
3100 | cmd->err_info->CommandStatus, DRIVER_OK, | |
3101 | blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ABORT); | |
d38ae168 MMOD |
3102 | break; |
3103 | case CMD_TIMEOUT: | |
3104 | printk(KERN_WARNING "cciss: cmd %p timedout\n", cmd); | |
1a614f50 SC |
3105 | rq->errors = make_status_bytes(SAM_STAT_GOOD, |
3106 | cmd->err_info->CommandStatus, DRIVER_OK, | |
3107 | blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR); | |
d38ae168 MMOD |
3108 | break; |
3109 | default: | |
3110 | printk(KERN_WARNING "cciss: cmd %p returned " | |
3111 | "unknown status %x\n", cmd, | |
3112 | cmd->err_info->CommandStatus); | |
1a614f50 SC |
3113 | rq->errors = make_status_bytes(SAM_STAT_GOOD, |
3114 | cmd->err_info->CommandStatus, DRIVER_OK, | |
3115 | blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR); | |
1da177e4 | 3116 | } |
d38ae168 MMOD |
3117 | |
3118 | after_error_processing: | |
3119 | ||
1da177e4 | 3120 | /* We need to return this command */ |
7c832835 BH |
3121 | if (retry_cmd) { |
3122 | resend_cciss_cmd(h, cmd); | |
1da177e4 | 3123 | return; |
7c832835 | 3124 | } |
03bbfee5 | 3125 | cmd->rq->completion_data = cmd; |
a9925a06 | 3126 | blk_complete_request(cmd->rq); |
1da177e4 LT |
3127 | } |
3128 | ||
7c832835 BH |
3129 | /* |
3130 | * Get a request and submit it to the controller. | |
1da177e4 | 3131 | */ |
165125e1 | 3132 | static void do_cciss_request(struct request_queue *q) |
1da177e4 | 3133 | { |
7c832835 | 3134 | ctlr_info_t *h = q->queuedata; |
1da177e4 | 3135 | CommandList_struct *c; |
00988a35 MMOD |
3136 | sector_t start_blk; |
3137 | int seg; | |
1da177e4 LT |
3138 | struct request *creq; |
3139 | u64bit temp64; | |
3140 | struct scatterlist tmp_sg[MAXSGENTRIES]; | |
3141 | drive_info_struct *drv; | |
3142 | int i, dir; | |
3143 | ||
3144 | /* We call start_io here in case there is a command waiting on the | |
3145 | * queue that has not been sent. | |
7c832835 | 3146 | */ |
1da177e4 LT |
3147 | if (blk_queue_plugged(q)) |
3148 | goto startio; | |
3149 | ||
7c832835 | 3150 | queue: |
9934c8c0 | 3151 | creq = blk_peek_request(q); |
1da177e4 LT |
3152 | if (!creq) |
3153 | goto startio; | |
3154 | ||
089fe1b2 | 3155 | BUG_ON(creq->nr_phys_segments > MAXSGENTRIES); |
1da177e4 | 3156 | |
7c832835 | 3157 | if ((c = cmd_alloc(h, 1)) == NULL) |
1da177e4 LT |
3158 | goto full; |
3159 | ||
9934c8c0 | 3160 | blk_start_request(creq); |
1da177e4 LT |
3161 | |
3162 | spin_unlock_irq(q->queue_lock); | |
3163 | ||
3164 | c->cmd_type = CMD_RWREQ; | |
3165 | c->rq = creq; | |
7c832835 BH |
3166 | |
3167 | /* fill in the request */ | |
1da177e4 | 3168 | drv = creq->rq_disk->private_data; |
7c832835 | 3169 | c->Header.ReplyQueue = 0; // unused in simple mode |
33079b21 MM |
3170 | /* got command from pool, so use the command block index instead */ |
3171 | /* for direct lookups. */ | |
3172 | /* The first 2 bits are reserved for controller error reporting. */ | |
3173 | c->Header.Tag.lower = (c->cmdindex << 3); | |
7c832835 | 3174 | c->Header.Tag.lower |= 0x04; /* flag for direct lookup. */ |
39ccf9a6 | 3175 | memcpy(&c->Header.LUN, drv->LunID, sizeof(drv->LunID)); |
7c832835 BH |
3176 | c->Request.CDBLen = 10; // 12 byte commands not in FW yet; |
3177 | c->Request.Type.Type = TYPE_CMD; // It is a command. | |
3178 | c->Request.Type.Attribute = ATTR_SIMPLE; | |
3179 | c->Request.Type.Direction = | |
a52de245 | 3180 | (rq_data_dir(creq) == READ) ? XFER_READ : XFER_WRITE; |
7c832835 BH |
3181 | c->Request.Timeout = 0; // Don't time out |
3182 | c->Request.CDB[0] = | |
00988a35 | 3183 | (rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write; |
83096ebf | 3184 | start_blk = blk_rq_pos(creq); |
1da177e4 | 3185 | #ifdef CCISS_DEBUG |
83096ebf TH |
3186 | printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n", |
3187 | (int)blk_rq_pos(creq), (int)blk_rq_sectors(creq)); | |
7c832835 | 3188 | #endif /* CCISS_DEBUG */ |
1da177e4 | 3189 | |
45711f1a | 3190 | sg_init_table(tmp_sg, MAXSGENTRIES); |
1da177e4 LT |
3191 | seg = blk_rq_map_sg(q, creq, tmp_sg); |
3192 | ||
7c832835 | 3193 | /* get the DMA records for the setup */ |
1da177e4 LT |
3194 | if (c->Request.Type.Direction == XFER_READ) |
3195 | dir = PCI_DMA_FROMDEVICE; | |
3196 | else | |
3197 | dir = PCI_DMA_TODEVICE; | |
3198 | ||
7c832835 | 3199 | for (i = 0; i < seg; i++) { |
1da177e4 | 3200 | c->SG[i].Len = tmp_sg[i].length; |
45711f1a | 3201 | temp64.val = (__u64) pci_map_page(h->pdev, sg_page(&tmp_sg[i]), |
7c832835 BH |
3202 | tmp_sg[i].offset, |
3203 | tmp_sg[i].length, dir); | |
1da177e4 | 3204 | c->SG[i].Addr.lower = temp64.val32.lower; |
7c832835 BH |
3205 | c->SG[i].Addr.upper = temp64.val32.upper; |
3206 | c->SG[i].Ext = 0; // we are not chaining | |
1da177e4 | 3207 | } |
7c832835 BH |
3208 | /* track how many SG entries we are using */ |
3209 | if (seg > h->maxSG) | |
3210 | h->maxSG = seg; | |
1da177e4 LT |
3211 | |
3212 | #ifdef CCISS_DEBUG | |
83096ebf TH |
3213 | printk(KERN_DEBUG "cciss: Submitting %u sectors in %d segments\n", |
3214 | blk_rq_sectors(creq), seg); | |
7c832835 | 3215 | #endif /* CCISS_DEBUG */ |
1da177e4 LT |
3216 | |
3217 | c->Header.SGList = c->Header.SGTotal = seg; | |
03bbfee5 MMOD |
3218 | if (likely(blk_fs_request(creq))) { |
3219 | if(h->cciss_read == CCISS_READ_10) { | |
3220 | c->Request.CDB[1] = 0; | |
3221 | c->Request.CDB[2] = (start_blk >> 24) & 0xff; //MSB | |
3222 | c->Request.CDB[3] = (start_blk >> 16) & 0xff; | |
3223 | c->Request.CDB[4] = (start_blk >> 8) & 0xff; | |
3224 | c->Request.CDB[5] = start_blk & 0xff; | |
3225 | c->Request.CDB[6] = 0; // (sect >> 24) & 0xff; MSB | |
83096ebf TH |
3226 | c->Request.CDB[7] = (blk_rq_sectors(creq) >> 8) & 0xff; |
3227 | c->Request.CDB[8] = blk_rq_sectors(creq) & 0xff; | |
03bbfee5 MMOD |
3228 | c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0; |
3229 | } else { | |
582539e5 RD |
3230 | u32 upper32 = upper_32_bits(start_blk); |
3231 | ||
03bbfee5 MMOD |
3232 | c->Request.CDBLen = 16; |
3233 | c->Request.CDB[1]= 0; | |
582539e5 RD |
3234 | c->Request.CDB[2]= (upper32 >> 24) & 0xff; //MSB |
3235 | c->Request.CDB[3]= (upper32 >> 16) & 0xff; | |
3236 | c->Request.CDB[4]= (upper32 >> 8) & 0xff; | |
3237 | c->Request.CDB[5]= upper32 & 0xff; | |
03bbfee5 MMOD |
3238 | c->Request.CDB[6]= (start_blk >> 24) & 0xff; |
3239 | c->Request.CDB[7]= (start_blk >> 16) & 0xff; | |
3240 | c->Request.CDB[8]= (start_blk >> 8) & 0xff; | |
3241 | c->Request.CDB[9]= start_blk & 0xff; | |
83096ebf TH |
3242 | c->Request.CDB[10]= (blk_rq_sectors(creq) >> 24) & 0xff; |
3243 | c->Request.CDB[11]= (blk_rq_sectors(creq) >> 16) & 0xff; | |
3244 | c->Request.CDB[12]= (blk_rq_sectors(creq) >> 8) & 0xff; | |
3245 | c->Request.CDB[13]= blk_rq_sectors(creq) & 0xff; | |
03bbfee5 MMOD |
3246 | c->Request.CDB[14] = c->Request.CDB[15] = 0; |
3247 | } | |
3248 | } else if (blk_pc_request(creq)) { | |
3249 | c->Request.CDBLen = creq->cmd_len; | |
3250 | memcpy(c->Request.CDB, creq->cmd, BLK_MAX_CDB); | |
00988a35 | 3251 | } else { |
03bbfee5 MMOD |
3252 | printk(KERN_WARNING "cciss%d: bad request type %d\n", h->ctlr, creq->cmd_type); |
3253 | BUG(); | |
00988a35 | 3254 | } |
1da177e4 LT |
3255 | |
3256 | spin_lock_irq(q->queue_lock); | |
3257 | ||
8a3173de | 3258 | addQ(&h->reqQ, c); |
1da177e4 | 3259 | h->Qdepth++; |
7c832835 BH |
3260 | if (h->Qdepth > h->maxQsinceinit) |
3261 | h->maxQsinceinit = h->Qdepth; | |
1da177e4 LT |
3262 | |
3263 | goto queue; | |
00988a35 | 3264 | full: |
1da177e4 | 3265 | blk_stop_queue(q); |
00988a35 | 3266 | startio: |
1da177e4 LT |
3267 | /* We will already have the driver lock here so not need |
3268 | * to lock it. | |
7c832835 | 3269 | */ |
1da177e4 LT |
3270 | start_io(h); |
3271 | } | |
3272 | ||
3da8b713 | 3273 | static inline unsigned long get_next_completion(ctlr_info_t *h) |
3274 | { | |
3da8b713 | 3275 | return h->access.command_completed(h); |
3da8b713 | 3276 | } |
3277 | ||
3278 | static inline int interrupt_pending(ctlr_info_t *h) | |
3279 | { | |
3da8b713 | 3280 | return h->access.intr_pending(h); |
3da8b713 | 3281 | } |
3282 | ||
3283 | static inline long interrupt_not_for_us(ctlr_info_t *h) | |
3284 | { | |
7c832835 | 3285 | return (((h->access.intr_pending(h) == 0) || |
3da8b713 | 3286 | (h->interrupts_enabled == 0))); |
3da8b713 | 3287 | } |
3288 | ||
7d12e780 | 3289 | static irqreturn_t do_cciss_intr(int irq, void *dev_id) |
1da177e4 LT |
3290 | { |
3291 | ctlr_info_t *h = dev_id; | |
3292 | CommandList_struct *c; | |
3293 | unsigned long flags; | |
33079b21 | 3294 | __u32 a, a1, a2; |
1da177e4 | 3295 | |
3da8b713 | 3296 | if (interrupt_not_for_us(h)) |
1da177e4 | 3297 | return IRQ_NONE; |
1da177e4 LT |
3298 | /* |
3299 | * If there are completed commands in the completion queue, | |
3300 | * we had better do something about it. | |
3301 | */ | |
3302 | spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); | |
3da8b713 | 3303 | while (interrupt_pending(h)) { |
7c832835 | 3304 | while ((a = get_next_completion(h)) != FIFO_EMPTY) { |
1da177e4 | 3305 | a1 = a; |
33079b21 MM |
3306 | if ((a & 0x04)) { |
3307 | a2 = (a >> 3); | |
f880632f | 3308 | if (a2 >= h->nr_cmds) { |
7c832835 BH |
3309 | printk(KERN_WARNING |
3310 | "cciss: controller cciss%d failed, stopping.\n", | |
3311 | h->ctlr); | |
33079b21 MM |
3312 | fail_all_cmds(h->ctlr); |
3313 | return IRQ_HANDLED; | |
3314 | } | |
3315 | ||
3316 | c = h->cmd_pool + a2; | |
3317 | a = c->busaddr; | |
3318 | ||
3319 | } else { | |
8a3173de JA |
3320 | struct hlist_node *tmp; |
3321 | ||
7c832835 | 3322 | a &= ~3; |
8a3173de JA |
3323 | c = NULL; |
3324 | hlist_for_each_entry(c, tmp, &h->cmpQ, list) { | |
3325 | if (c->busaddr == a) | |
7c832835 BH |
3326 | break; |
3327 | } | |
33079b21 | 3328 | } |
1da177e4 LT |
3329 | /* |
3330 | * If we've found the command, take it off the | |
3331 | * completion Q and free it | |
3332 | */ | |
8a3173de JA |
3333 | if (c && c->busaddr == a) { |
3334 | removeQ(c); | |
1da177e4 LT |
3335 | if (c->cmd_type == CMD_RWREQ) { |
3336 | complete_command(h, c, 0); | |
3337 | } else if (c->cmd_type == CMD_IOCTL_PEND) { | |
3338 | complete(c->waiting); | |
3339 | } | |
3340 | # ifdef CONFIG_CISS_SCSI_TAPE | |
3341 | else if (c->cmd_type == CMD_SCSI) | |
3342 | complete_scsi_command(c, 0, a1); | |
3343 | # endif | |
3344 | continue; | |
3345 | } | |
3346 | } | |
3347 | } | |
3348 | ||
1da177e4 LT |
3349 | spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); |
3350 | return IRQ_HANDLED; | |
3351 | } | |
7c832835 | 3352 | |
b368c9dd AP |
3353 | /** |
3354 | * add_to_scan_list() - add controller to rescan queue | |
3355 | * @h: Pointer to the controller. | |
3356 | * | |
3357 | * Adds the controller to the rescan queue if not already on the queue. | |
3358 | * | |
3359 | * returns 1 if added to the queue, 0 if skipped (could be on the | |
3360 | * queue already, or the controller could be initializing or shutting | |
3361 | * down). | |
3362 | **/ | |
3363 | static int add_to_scan_list(struct ctlr_info *h) | |
3364 | { | |
3365 | struct ctlr_info *test_h; | |
3366 | int found = 0; | |
3367 | int ret = 0; | |
3368 | ||
3369 | if (h->busy_initializing) | |
3370 | return 0; | |
3371 | ||
3372 | if (!mutex_trylock(&h->busy_shutting_down)) | |
3373 | return 0; | |
3374 | ||
3375 | mutex_lock(&scan_mutex); | |
3376 | list_for_each_entry(test_h, &scan_q, scan_list) { | |
3377 | if (test_h == h) { | |
3378 | found = 1; | |
3379 | break; | |
3380 | } | |
3381 | } | |
3382 | if (!found && !h->busy_scanning) { | |
3383 | INIT_COMPLETION(h->scan_wait); | |
3384 | list_add_tail(&h->scan_list, &scan_q); | |
3385 | ret = 1; | |
3386 | } | |
3387 | mutex_unlock(&scan_mutex); | |
3388 | mutex_unlock(&h->busy_shutting_down); | |
3389 | ||
3390 | return ret; | |
3391 | } | |
3392 | ||
3393 | /** | |
3394 | * remove_from_scan_list() - remove controller from rescan queue | |
3395 | * @h: Pointer to the controller. | |
3396 | * | |
3397 | * Removes the controller from the rescan queue if present. Blocks if | |
3398 | * the controller is currently conducting a rescan. | |
3399 | **/ | |
3400 | static void remove_from_scan_list(struct ctlr_info *h) | |
3401 | { | |
3402 | struct ctlr_info *test_h, *tmp_h; | |
3403 | int scanning = 0; | |
3404 | ||
3405 | mutex_lock(&scan_mutex); | |
3406 | list_for_each_entry_safe(test_h, tmp_h, &scan_q, scan_list) { | |
3407 | if (test_h == h) { | |
3408 | list_del(&h->scan_list); | |
3409 | complete_all(&h->scan_wait); | |
3410 | mutex_unlock(&scan_mutex); | |
3411 | return; | |
3412 | } | |
3413 | } | |
3414 | if (&h->busy_scanning) | |
3415 | scanning = 0; | |
3416 | mutex_unlock(&scan_mutex); | |
3417 | ||
3418 | if (scanning) | |
3419 | wait_for_completion(&h->scan_wait); | |
3420 | } | |
3421 | ||
3422 | /** | |
3423 | * scan_thread() - kernel thread used to rescan controllers | |
3424 | * @data: Ignored. | |
3425 | * | |
3426 | * A kernel thread used scan for drive topology changes on | |
3427 | * controllers. The thread processes only one controller at a time | |
3428 | * using a queue. Controllers are added to the queue using | |
3429 | * add_to_scan_list() and removed from the queue either after done | |
3430 | * processing or using remove_from_scan_list(). | |
3431 | * | |
3432 | * returns 0. | |
3433 | **/ | |
0a9279cc MM |
3434 | static int scan_thread(void *data) |
3435 | { | |
b368c9dd | 3436 | struct ctlr_info *h; |
0a9279cc | 3437 | |
b368c9dd AP |
3438 | while (1) { |
3439 | set_current_state(TASK_INTERRUPTIBLE); | |
3440 | schedule(); | |
0a9279cc MM |
3441 | if (kthread_should_stop()) |
3442 | break; | |
b368c9dd AP |
3443 | |
3444 | while (1) { | |
3445 | mutex_lock(&scan_mutex); | |
3446 | if (list_empty(&scan_q)) { | |
3447 | mutex_unlock(&scan_mutex); | |
3448 | break; | |
3449 | } | |
3450 | ||
3451 | h = list_entry(scan_q.next, | |
3452 | struct ctlr_info, | |
3453 | scan_list); | |
3454 | list_del(&h->scan_list); | |
3455 | h->busy_scanning = 1; | |
3456 | mutex_unlock(&scan_mutex); | |
3457 | ||
3458 | if (h) { | |
2d11d993 | 3459 | rebuild_lun_table(h, 0, 0); |
b368c9dd AP |
3460 | complete_all(&h->scan_wait); |
3461 | mutex_lock(&scan_mutex); | |
3462 | h->busy_scanning = 0; | |
3463 | mutex_unlock(&scan_mutex); | |
3464 | } | |
3465 | } | |
0a9279cc | 3466 | } |
b368c9dd | 3467 | |
0a9279cc MM |
3468 | return 0; |
3469 | } | |
3470 | ||
3471 | static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c) | |
3472 | { | |
3473 | if (c->err_info->SenseInfo[2] != UNIT_ATTENTION) | |
3474 | return 0; | |
3475 | ||
3476 | switch (c->err_info->SenseInfo[12]) { | |
3477 | case STATE_CHANGED: | |
3478 | printk(KERN_WARNING "cciss%d: a state change " | |
3479 | "detected, command retried\n", h->ctlr); | |
3480 | return 1; | |
3481 | break; | |
3482 | case LUN_FAILED: | |
3483 | printk(KERN_WARNING "cciss%d: LUN failure " | |
3484 | "detected, action required\n", h->ctlr); | |
3485 | return 1; | |
3486 | break; | |
3487 | case REPORT_LUNS_CHANGED: | |
3488 | printk(KERN_WARNING "cciss%d: report LUN data " | |
3489 | "changed\n", h->ctlr); | |
b368c9dd AP |
3490 | add_to_scan_list(h); |
3491 | wake_up_process(cciss_scan_thread); | |
0a9279cc MM |
3492 | return 1; |
3493 | break; | |
3494 | case POWER_OR_RESET: | |
3495 | printk(KERN_WARNING "cciss%d: a power on " | |
3496 | "or device reset detected\n", h->ctlr); | |
3497 | return 1; | |
3498 | break; | |
3499 | case UNIT_ATTENTION_CLEARED: | |
3500 | printk(KERN_WARNING "cciss%d: unit attention " | |
3501 | "cleared by another initiator\n", h->ctlr); | |
3502 | return 1; | |
3503 | break; | |
3504 | default: | |
3505 | printk(KERN_WARNING "cciss%d: unknown " | |
3506 | "unit attention detected\n", h->ctlr); | |
3507 | return 1; | |
3508 | } | |
3509 | } | |
3510 | ||
7c832835 | 3511 | /* |
d14c4ab5 | 3512 | * We cannot read the structure directly, for portability we must use |
1da177e4 | 3513 | * the io functions. |
7c832835 | 3514 | * This is for debug only. |
1da177e4 LT |
3515 | */ |
3516 | #ifdef CCISS_DEBUG | |
7c832835 | 3517 | static void print_cfg_table(CfgTable_struct *tb) |
1da177e4 LT |
3518 | { |
3519 | int i; | |
3520 | char temp_name[17]; | |
3521 | ||
3522 | printk("Controller Configuration information\n"); | |
3523 | printk("------------------------------------\n"); | |
7c832835 | 3524 | for (i = 0; i < 4; i++) |
1da177e4 | 3525 | temp_name[i] = readb(&(tb->Signature[i])); |
7c832835 BH |
3526 | temp_name[4] = '\0'; |
3527 | printk(" Signature = %s\n", temp_name); | |
1da177e4 | 3528 | printk(" Spec Number = %d\n", readl(&(tb->SpecValence))); |
7c832835 BH |
3529 | printk(" Transport methods supported = 0x%x\n", |
3530 | readl(&(tb->TransportSupport))); | |
3531 | printk(" Transport methods active = 0x%x\n", | |
3532 | readl(&(tb->TransportActive))); | |
3533 | printk(" Requested transport Method = 0x%x\n", | |
3534 | readl(&(tb->HostWrite.TransportRequest))); | |
d14c4ab5 | 3535 | printk(" Coalesce Interrupt Delay = 0x%x\n", |
7c832835 | 3536 | readl(&(tb->HostWrite.CoalIntDelay))); |
d14c4ab5 | 3537 | printk(" Coalesce Interrupt Count = 0x%x\n", |
7c832835 BH |
3538 | readl(&(tb->HostWrite.CoalIntCount))); |
3539 | printk(" Max outstanding commands = 0x%d\n", | |
3540 | readl(&(tb->CmdsOutMax))); | |
3541 | printk(" Bus Types = 0x%x\n", readl(&(tb->BusTypes))); | |
3542 | for (i = 0; i < 16; i++) | |
1da177e4 LT |
3543 | temp_name[i] = readb(&(tb->ServerName[i])); |
3544 | temp_name[16] = '\0'; | |
3545 | printk(" Server Name = %s\n", temp_name); | |
7c832835 | 3546 | printk(" Heartbeat Counter = 0x%x\n\n\n", readl(&(tb->HeartBeat))); |
1da177e4 | 3547 | } |
7c832835 | 3548 | #endif /* CCISS_DEBUG */ |
1da177e4 | 3549 | |
7c832835 | 3550 | static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr) |
1da177e4 LT |
3551 | { |
3552 | int i, offset, mem_type, bar_type; | |
7c832835 | 3553 | if (pci_bar_addr == PCI_BASE_ADDRESS_0) /* looking for BAR zero? */ |
1da177e4 LT |
3554 | return 0; |
3555 | offset = 0; | |
7c832835 BH |
3556 | for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { |
3557 | bar_type = pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE; | |
1da177e4 LT |
3558 | if (bar_type == PCI_BASE_ADDRESS_SPACE_IO) |
3559 | offset += 4; | |
3560 | else { | |
3561 | mem_type = pci_resource_flags(pdev, i) & | |
7c832835 | 3562 | PCI_BASE_ADDRESS_MEM_TYPE_MASK; |
1da177e4 | 3563 | switch (mem_type) { |
7c832835 BH |
3564 | case PCI_BASE_ADDRESS_MEM_TYPE_32: |
3565 | case PCI_BASE_ADDRESS_MEM_TYPE_1M: | |
3566 | offset += 4; /* 32 bit */ | |
3567 | break; | |
3568 | case PCI_BASE_ADDRESS_MEM_TYPE_64: | |
3569 | offset += 8; | |
3570 | break; | |
3571 | default: /* reserved in PCI 2.2 */ | |
3572 | printk(KERN_WARNING | |
3573 | "Base address is invalid\n"); | |
3574 | return -1; | |
1da177e4 LT |
3575 | break; |
3576 | } | |
3577 | } | |
7c832835 BH |
3578 | if (offset == pci_bar_addr - PCI_BASE_ADDRESS_0) |
3579 | return i + 1; | |
1da177e4 LT |
3580 | } |
3581 | return -1; | |
3582 | } | |
3583 | ||
fb86a35b MM |
3584 | /* If MSI/MSI-X is supported by the kernel we will try to enable it on |
3585 | * controllers that are capable. If not, we use IO-APIC mode. | |
3586 | */ | |
3587 | ||
7c832835 BH |
3588 | static void __devinit cciss_interrupt_mode(ctlr_info_t *c, |
3589 | struct pci_dev *pdev, __u32 board_id) | |
fb86a35b MM |
3590 | { |
3591 | #ifdef CONFIG_PCI_MSI | |
7c832835 BH |
3592 | int err; |
3593 | struct msix_entry cciss_msix_entries[4] = { {0, 0}, {0, 1}, | |
3594 | {0, 2}, {0, 3} | |
3595 | }; | |
fb86a35b MM |
3596 | |
3597 | /* Some boards advertise MSI but don't really support it */ | |
3598 | if ((board_id == 0x40700E11) || | |
7c832835 BH |
3599 | (board_id == 0x40800E11) || |
3600 | (board_id == 0x40820E11) || (board_id == 0x40830E11)) | |
fb86a35b MM |
3601 | goto default_int_mode; |
3602 | ||
7c832835 BH |
3603 | if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) { |
3604 | err = pci_enable_msix(pdev, cciss_msix_entries, 4); | |
3605 | if (!err) { | |
3606 | c->intr[0] = cciss_msix_entries[0].vector; | |
3607 | c->intr[1] = cciss_msix_entries[1].vector; | |
3608 | c->intr[2] = cciss_msix_entries[2].vector; | |
3609 | c->intr[3] = cciss_msix_entries[3].vector; | |
3610 | c->msix_vector = 1; | |
3611 | return; | |
3612 | } | |
3613 | if (err > 0) { | |
3614 | printk(KERN_WARNING "cciss: only %d MSI-X vectors " | |
3615 | "available\n", err); | |
1ecb9c0f | 3616 | goto default_int_mode; |
7c832835 BH |
3617 | } else { |
3618 | printk(KERN_WARNING "cciss: MSI-X init failed %d\n", | |
3619 | err); | |
1ecb9c0f | 3620 | goto default_int_mode; |
7c832835 BH |
3621 | } |
3622 | } | |
3623 | if (pci_find_capability(pdev, PCI_CAP_ID_MSI)) { | |
3624 | if (!pci_enable_msi(pdev)) { | |
7c832835 | 3625 | c->msi_vector = 1; |
7c832835 BH |
3626 | } else { |
3627 | printk(KERN_WARNING "cciss: MSI init failed\n"); | |
7c832835 BH |
3628 | } |
3629 | } | |
1ecb9c0f | 3630 | default_int_mode: |
7c832835 | 3631 | #endif /* CONFIG_PCI_MSI */ |
fb86a35b | 3632 | /* if we get here we're going to use the default interrupt mode */ |
7c832835 | 3633 | c->intr[SIMPLE_MODE_INT] = pdev->irq; |
fb86a35b MM |
3634 | return; |
3635 | } | |
3636 | ||
7d1fd970 | 3637 | static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) |
1da177e4 LT |
3638 | { |
3639 | ushort subsystem_vendor_id, subsystem_device_id, command; | |
3640 | __u32 board_id, scratchpad = 0; | |
3641 | __u64 cfg_offset; | |
3642 | __u32 cfg_base_addr; | |
3643 | __u64 cfg_base_addr_index; | |
c33ac89b | 3644 | int i, err; |
1da177e4 LT |
3645 | |
3646 | /* check to see if controller has been disabled */ | |
3647 | /* BEFORE trying to enable it */ | |
7c832835 BH |
3648 | (void)pci_read_config_word(pdev, PCI_COMMAND, &command); |
3649 | if (!(command & 0x02)) { | |
3650 | printk(KERN_WARNING | |
3651 | "cciss: controller appears to be disabled\n"); | |
c33ac89b | 3652 | return -ENODEV; |
1da177e4 LT |
3653 | } |
3654 | ||
c33ac89b | 3655 | err = pci_enable_device(pdev); |
7c832835 | 3656 | if (err) { |
1da177e4 | 3657 | printk(KERN_ERR "cciss: Unable to Enable PCI device\n"); |
c33ac89b | 3658 | return err; |
1da177e4 | 3659 | } |
1da177e4 | 3660 | |
4e570309 BH |
3661 | err = pci_request_regions(pdev, "cciss"); |
3662 | if (err) { | |
3663 | printk(KERN_ERR "cciss: Cannot obtain PCI resources, " | |
7c832835 | 3664 | "aborting\n"); |
872225ca | 3665 | return err; |
4e570309 BH |
3666 | } |
3667 | ||
1da177e4 LT |
3668 | subsystem_vendor_id = pdev->subsystem_vendor; |
3669 | subsystem_device_id = pdev->subsystem_device; | |
3670 | board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) | | |
7c832835 | 3671 | subsystem_vendor_id); |
1da177e4 | 3672 | |
1da177e4 LT |
3673 | #ifdef CCISS_DEBUG |
3674 | printk("command = %x\n", command); | |
3675 | printk("irq = %x\n", pdev->irq); | |
3676 | printk("board_id = %x\n", board_id); | |
7c832835 | 3677 | #endif /* CCISS_DEBUG */ |
1da177e4 | 3678 | |
fb86a35b MM |
3679 | /* If the kernel supports MSI/MSI-X we will try to enable that functionality, |
3680 | * else we use the IO-APIC interrupt assigned to us by system ROM. | |
3681 | */ | |
3682 | cciss_interrupt_mode(c, pdev, board_id); | |
1da177e4 | 3683 | |
e1438581 MM |
3684 | /* find the memory BAR */ |
3685 | for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { | |
3686 | if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) | |
3687 | break; | |
3688 | } | |
3689 | if (i == DEVICE_COUNT_RESOURCE) { | |
3690 | printk(KERN_WARNING "cciss: No memory BAR found\n"); | |
3691 | err = -ENODEV; | |
3692 | goto err_out_free_res; | |
3693 | } | |
3694 | ||
3695 | c->paddr = pci_resource_start(pdev, i); /* addressing mode bits | |
3696 | * already removed | |
3697 | */ | |
1da177e4 | 3698 | |
1da177e4 | 3699 | #ifdef CCISS_DEBUG |
9f92f471 | 3700 | printk("address 0 = %lx\n", c->paddr); |
7c832835 | 3701 | #endif /* CCISS_DEBUG */ |
a5b92873 | 3702 | c->vaddr = remap_pci_mem(c->paddr, 0x250); |
1da177e4 LT |
3703 | |
3704 | /* Wait for the board to become ready. (PCI hotplug needs this.) | |
3705 | * We poll for up to 120 secs, once per 100ms. */ | |
7c832835 | 3706 | for (i = 0; i < 1200; i++) { |
1da177e4 LT |
3707 | scratchpad = readl(c->vaddr + SA5_SCRATCHPAD_OFFSET); |
3708 | if (scratchpad == CCISS_FIRMWARE_READY) | |
3709 | break; | |
3710 | set_current_state(TASK_INTERRUPTIBLE); | |
4d761609 | 3711 | schedule_timeout(msecs_to_jiffies(100)); /* wait 100ms */ |
1da177e4 LT |
3712 | } |
3713 | if (scratchpad != CCISS_FIRMWARE_READY) { | |
3714 | printk(KERN_WARNING "cciss: Board not ready. Timed out.\n"); | |
c33ac89b | 3715 | err = -ENODEV; |
4e570309 | 3716 | goto err_out_free_res; |
1da177e4 LT |
3717 | } |
3718 | ||
3719 | /* get the address index number */ | |
3720 | cfg_base_addr = readl(c->vaddr + SA5_CTCFG_OFFSET); | |
3721 | cfg_base_addr &= (__u32) 0x0000ffff; | |
3722 | #ifdef CCISS_DEBUG | |
3723 | printk("cfg base address = %x\n", cfg_base_addr); | |
7c832835 BH |
3724 | #endif /* CCISS_DEBUG */ |
3725 | cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr); | |
1da177e4 | 3726 | #ifdef CCISS_DEBUG |
9f92f471 RD |
3727 | printk("cfg base address index = %llx\n", |
3728 | (unsigned long long)cfg_base_addr_index); | |
7c832835 | 3729 | #endif /* CCISS_DEBUG */ |
1da177e4 LT |
3730 | if (cfg_base_addr_index == -1) { |
3731 | printk(KERN_WARNING "cciss: Cannot find cfg_base_addr_index\n"); | |
c33ac89b | 3732 | err = -ENODEV; |
4e570309 | 3733 | goto err_out_free_res; |
1da177e4 LT |
3734 | } |
3735 | ||
3736 | cfg_offset = readl(c->vaddr + SA5_CTMEM_OFFSET); | |
3737 | #ifdef CCISS_DEBUG | |
9f92f471 | 3738 | printk("cfg offset = %llx\n", (unsigned long long)cfg_offset); |
7c832835 BH |
3739 | #endif /* CCISS_DEBUG */ |
3740 | c->cfgtable = remap_pci_mem(pci_resource_start(pdev, | |
3741 | cfg_base_addr_index) + | |
3742 | cfg_offset, sizeof(CfgTable_struct)); | |
1da177e4 LT |
3743 | c->board_id = board_id; |
3744 | ||
3745 | #ifdef CCISS_DEBUG | |
945f390f | 3746 | print_cfg_table(c->cfgtable); |
7c832835 | 3747 | #endif /* CCISS_DEBUG */ |
1da177e4 | 3748 | |
49153998 MM |
3749 | /* Some controllers support Zero Memory Raid (ZMR). |
3750 | * When configured in ZMR mode the number of supported | |
3751 | * commands drops to 64. So instead of just setting an | |
3752 | * arbitrary value we make the driver a little smarter. | |
3753 | * We read the config table to tell us how many commands | |
3754 | * are supported on the controller then subtract 4 to | |
3755 | * leave a little room for ioctl calls. | |
3756 | */ | |
3757 | c->max_commands = readl(&(c->cfgtable->CmdsOutMax)); | |
7c832835 | 3758 | for (i = 0; i < ARRAY_SIZE(products); i++) { |
1da177e4 LT |
3759 | if (board_id == products[i].board_id) { |
3760 | c->product_name = products[i].product_name; | |
3761 | c->access = *(products[i].access); | |
49153998 | 3762 | c->nr_cmds = c->max_commands - 4; |
1da177e4 LT |
3763 | break; |
3764 | } | |
3765 | } | |
7c832835 BH |
3766 | if ((readb(&c->cfgtable->Signature[0]) != 'C') || |
3767 | (readb(&c->cfgtable->Signature[1]) != 'I') || | |
3768 | (readb(&c->cfgtable->Signature[2]) != 'S') || | |
3769 | (readb(&c->cfgtable->Signature[3]) != 'S')) { | |
1da177e4 | 3770 | printk("Does not appear to be a valid CISS config table\n"); |
c33ac89b | 3771 | err = -ENODEV; |
4e570309 | 3772 | goto err_out_free_res; |
1da177e4 | 3773 | } |
4ff9a9a4 MM |
3774 | /* We didn't find the controller in our list. We know the |
3775 | * signature is valid. If it's an HP device let's try to | |
3776 | * bind to the device and fire it up. Otherwise we bail. | |
3777 | */ | |
3778 | if (i == ARRAY_SIZE(products)) { | |
3779 | if (subsystem_vendor_id == PCI_VENDOR_ID_HP) { | |
3780 | c->product_name = products[i-1].product_name; | |
3781 | c->access = *(products[i-1].access); | |
49153998 | 3782 | c->nr_cmds = c->max_commands - 4; |
4ff9a9a4 MM |
3783 | printk(KERN_WARNING "cciss: This is an unknown " |
3784 | "Smart Array controller.\n" | |
3785 | "cciss: Please update to the latest driver " | |
3786 | "available from www.hp.com.\n"); | |
3787 | } else { | |
3788 | printk(KERN_WARNING "cciss: Sorry, I don't know how" | |
3789 | " to access the Smart Array controller %08lx\n" | |
3790 | , (unsigned long)board_id); | |
3791 | err = -ENODEV; | |
3792 | goto err_out_free_res; | |
3793 | } | |
3794 | } | |
1da177e4 | 3795 | #ifdef CONFIG_X86 |
7c832835 BH |
3796 | { |
3797 | /* Need to enable prefetch in the SCSI core for 6400 in x86 */ | |
3798 | __u32 prefetch; | |
3799 | prefetch = readl(&(c->cfgtable->SCSI_Prefetch)); | |
3800 | prefetch |= 0x100; | |
3801 | writel(prefetch, &(c->cfgtable->SCSI_Prefetch)); | |
3802 | } | |
1da177e4 LT |
3803 | #endif |
3804 | ||
8bf50f71 MMOD |
3805 | /* Disabling DMA prefetch and refetch for the P600. |
3806 | * An ASIC bug may result in accesses to invalid memory addresses. | |
3807 | * We've disabled prefetch for some time now. Testing with XEN | |
3808 | * kernels revealed a bug in the refetch if dom0 resides on a P600. | |
f92e2f5f MM |
3809 | */ |
3810 | if(board_id == 0x3225103C) { | |
3811 | __u32 dma_prefetch; | |
8bf50f71 | 3812 | __u32 dma_refetch; |
f92e2f5f MM |
3813 | dma_prefetch = readl(c->vaddr + I2O_DMA1_CFG); |
3814 | dma_prefetch |= 0x8000; | |
3815 | writel(dma_prefetch, c->vaddr + I2O_DMA1_CFG); | |
8bf50f71 MMOD |
3816 | pci_read_config_dword(pdev, PCI_COMMAND_PARITY, &dma_refetch); |
3817 | dma_refetch |= 0x1; | |
3818 | pci_write_config_dword(pdev, PCI_COMMAND_PARITY, dma_refetch); | |
f92e2f5f MM |
3819 | } |
3820 | ||
1da177e4 LT |
3821 | #ifdef CCISS_DEBUG |
3822 | printk("Trying to put board into Simple mode\n"); | |
7c832835 | 3823 | #endif /* CCISS_DEBUG */ |
1da177e4 | 3824 | c->max_commands = readl(&(c->cfgtable->CmdsOutMax)); |
7c832835 BH |
3825 | /* Update the field, and then ring the doorbell */ |
3826 | writel(CFGTBL_Trans_Simple, &(c->cfgtable->HostWrite.TransportRequest)); | |
3827 | writel(CFGTBL_ChangeReq, c->vaddr + SA5_DOORBELL); | |
1da177e4 LT |
3828 | |
3829 | /* under certain very rare conditions, this can take awhile. | |
3830 | * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right | |
3831 | * as we enter this code.) */ | |
7c832835 | 3832 | for (i = 0; i < MAX_CONFIG_WAIT; i++) { |
1da177e4 LT |
3833 | if (!(readl(c->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq)) |
3834 | break; | |
3835 | /* delay and try again */ | |
3836 | set_current_state(TASK_INTERRUPTIBLE); | |
4d761609 | 3837 | schedule_timeout(msecs_to_jiffies(1)); |
7c832835 | 3838 | } |
1da177e4 LT |
3839 | |
3840 | #ifdef CCISS_DEBUG | |
7c832835 BH |
3841 | printk(KERN_DEBUG "I counter got to %d %x\n", i, |
3842 | readl(c->vaddr + SA5_DOORBELL)); | |
3843 | #endif /* CCISS_DEBUG */ | |
1da177e4 | 3844 | #ifdef CCISS_DEBUG |
7c832835 BH |
3845 | print_cfg_table(c->cfgtable); |
3846 | #endif /* CCISS_DEBUG */ | |
1da177e4 | 3847 | |
7c832835 | 3848 | if (!(readl(&(c->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) { |
1da177e4 | 3849 | printk(KERN_WARNING "cciss: unable to get board into" |
7c832835 | 3850 | " simple mode\n"); |
c33ac89b | 3851 | err = -ENODEV; |
4e570309 | 3852 | goto err_out_free_res; |
1da177e4 LT |
3853 | } |
3854 | return 0; | |
3855 | ||
5faad620 | 3856 | err_out_free_res: |
872225ca MM |
3857 | /* |
3858 | * Deliberately omit pci_disable_device(): it does something nasty to | |
3859 | * Smart Array controllers that pci_enable_device does not undo | |
3860 | */ | |
4e570309 | 3861 | pci_release_regions(pdev); |
c33ac89b | 3862 | return err; |
1da177e4 LT |
3863 | } |
3864 | ||
6ae5ce8e MM |
3865 | /* Function to find the first free pointer into our hba[] array |
3866 | * Returns -1 if no free entries are left. | |
7c832835 | 3867 | */ |
1da177e4 LT |
3868 | static int alloc_cciss_hba(void) |
3869 | { | |
799202cb | 3870 | int i; |
1da177e4 | 3871 | |
7c832835 | 3872 | for (i = 0; i < MAX_CTLR; i++) { |
1da177e4 LT |
3873 | if (!hba[i]) { |
3874 | ctlr_info_t *p; | |
f2912a12 | 3875 | |
06ff37ff | 3876 | p = kzalloc(sizeof(ctlr_info_t), GFP_KERNEL); |
1da177e4 LT |
3877 | if (!p) |
3878 | goto Enomem; | |
1da177e4 LT |
3879 | hba[i] = p; |
3880 | return i; | |
3881 | } | |
3882 | } | |
3883 | printk(KERN_WARNING "cciss: This driver supports a maximum" | |
7c832835 | 3884 | " of %d controllers.\n", MAX_CTLR); |
799202cb MM |
3885 | return -1; |
3886 | Enomem: | |
1da177e4 | 3887 | printk(KERN_ERR "cciss: out of memory.\n"); |
1da177e4 LT |
3888 | return -1; |
3889 | } | |
3890 | ||
2c935593 | 3891 | static void free_hba(int n) |
1da177e4 | 3892 | { |
2c935593 SC |
3893 | ctlr_info_t *h = hba[n]; |
3894 | int i; | |
1da177e4 | 3895 | |
2c935593 SC |
3896 | hba[n] = NULL; |
3897 | for (i = 0; i < h->highest_lun + 1; i++) | |
3898 | if (h->gendisk[i] != NULL) | |
3899 | put_disk(h->gendisk[i]); | |
3900 | kfree(h); | |
1da177e4 LT |
3901 | } |
3902 | ||
82eb03cf CC |
3903 | /* Send a message CDB to the firmware. */ |
3904 | static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, unsigned char type) | |
3905 | { | |
3906 | typedef struct { | |
3907 | CommandListHeader_struct CommandHeader; | |
3908 | RequestBlock_struct Request; | |
3909 | ErrDescriptor_struct ErrorDescriptor; | |
3910 | } Command; | |
3911 | static const size_t cmd_sz = sizeof(Command) + sizeof(ErrorInfo_struct); | |
3912 | Command *cmd; | |
3913 | dma_addr_t paddr64; | |
3914 | uint32_t paddr32, tag; | |
3915 | void __iomem *vaddr; | |
3916 | int i, err; | |
3917 | ||
3918 | vaddr = ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); | |
3919 | if (vaddr == NULL) | |
3920 | return -ENOMEM; | |
3921 | ||
3922 | /* The Inbound Post Queue only accepts 32-bit physical addresses for the | |
3923 | CCISS commands, so they must be allocated from the lower 4GiB of | |
3924 | memory. */ | |
e930438c | 3925 | err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); |
82eb03cf CC |
3926 | if (err) { |
3927 | iounmap(vaddr); | |
3928 | return -ENOMEM; | |
3929 | } | |
3930 | ||
3931 | cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64); | |
3932 | if (cmd == NULL) { | |
3933 | iounmap(vaddr); | |
3934 | return -ENOMEM; | |
3935 | } | |
3936 | ||
3937 | /* This must fit, because of the 32-bit consistent DMA mask. Also, | |
3938 | although there's no guarantee, we assume that the address is at | |
3939 | least 4-byte aligned (most likely, it's page-aligned). */ | |
3940 | paddr32 = paddr64; | |
3941 | ||
3942 | cmd->CommandHeader.ReplyQueue = 0; | |
3943 | cmd->CommandHeader.SGList = 0; | |
3944 | cmd->CommandHeader.SGTotal = 0; | |
3945 | cmd->CommandHeader.Tag.lower = paddr32; | |
3946 | cmd->CommandHeader.Tag.upper = 0; | |
3947 | memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8); | |
3948 | ||
3949 | cmd->Request.CDBLen = 16; | |
3950 | cmd->Request.Type.Type = TYPE_MSG; | |
3951 | cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE; | |
3952 | cmd->Request.Type.Direction = XFER_NONE; | |
3953 | cmd->Request.Timeout = 0; /* Don't time out */ | |
3954 | cmd->Request.CDB[0] = opcode; | |
3955 | cmd->Request.CDB[1] = type; | |
3956 | memset(&cmd->Request.CDB[2], 0, 14); /* the rest of the CDB is reserved */ | |
3957 | ||
3958 | cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(Command); | |
3959 | cmd->ErrorDescriptor.Addr.upper = 0; | |
3960 | cmd->ErrorDescriptor.Len = sizeof(ErrorInfo_struct); | |
3961 | ||
3962 | writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET); | |
3963 | ||
3964 | for (i = 0; i < 10; i++) { | |
3965 | tag = readl(vaddr + SA5_REPLY_PORT_OFFSET); | |
3966 | if ((tag & ~3) == paddr32) | |
3967 | break; | |
3968 | schedule_timeout_uninterruptible(HZ); | |
3969 | } | |
3970 | ||
3971 | iounmap(vaddr); | |
3972 | ||
3973 | /* we leak the DMA buffer here ... no choice since the controller could | |
3974 | still complete the command. */ | |
3975 | if (i == 10) { | |
3976 | printk(KERN_ERR "cciss: controller message %02x:%02x timed out\n", | |
3977 | opcode, type); | |
3978 | return -ETIMEDOUT; | |
3979 | } | |
3980 | ||
3981 | pci_free_consistent(pdev, cmd_sz, cmd, paddr64); | |
3982 | ||
3983 | if (tag & 2) { | |
3984 | printk(KERN_ERR "cciss: controller message %02x:%02x failed\n", | |
3985 | opcode, type); | |
3986 | return -EIO; | |
3987 | } | |
3988 | ||
3989 | printk(KERN_INFO "cciss: controller message %02x:%02x succeeded\n", | |
3990 | opcode, type); | |
3991 | return 0; | |
3992 | } | |
3993 | ||
3994 | #define cciss_soft_reset_controller(p) cciss_message(p, 1, 0) | |
3995 | #define cciss_noop(p) cciss_message(p, 3, 0) | |
3996 | ||
3997 | static __devinit int cciss_reset_msi(struct pci_dev *pdev) | |
3998 | { | |
3999 | /* the #defines are stolen from drivers/pci/msi.h. */ | |
4000 | #define msi_control_reg(base) (base + PCI_MSI_FLAGS) | |
4001 | #define PCI_MSIX_FLAGS_ENABLE (1 << 15) | |
4002 | ||
4003 | int pos; | |
4004 | u16 control = 0; | |
4005 | ||
4006 | pos = pci_find_capability(pdev, PCI_CAP_ID_MSI); | |
4007 | if (pos) { | |
4008 | pci_read_config_word(pdev, msi_control_reg(pos), &control); | |
4009 | if (control & PCI_MSI_FLAGS_ENABLE) { | |
4010 | printk(KERN_INFO "cciss: resetting MSI\n"); | |
4011 | pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSI_FLAGS_ENABLE); | |
4012 | } | |
4013 | } | |
4014 | ||
4015 | pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX); | |
4016 | if (pos) { | |
4017 | pci_read_config_word(pdev, msi_control_reg(pos), &control); | |
4018 | if (control & PCI_MSIX_FLAGS_ENABLE) { | |
4019 | printk(KERN_INFO "cciss: resetting MSI-X\n"); | |
4020 | pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSIX_FLAGS_ENABLE); | |
4021 | } | |
4022 | } | |
4023 | ||
4024 | return 0; | |
4025 | } | |
4026 | ||
4027 | /* This does a hard reset of the controller using PCI power management | |
4028 | * states. */ | |
4029 | static __devinit int cciss_hard_reset_controller(struct pci_dev *pdev) | |
4030 | { | |
4031 | u16 pmcsr, saved_config_space[32]; | |
4032 | int i, pos; | |
4033 | ||
4034 | printk(KERN_INFO "cciss: using PCI PM to reset controller\n"); | |
4035 | ||
4036 | /* This is very nearly the same thing as | |
4037 | ||
4038 | pci_save_state(pci_dev); | |
4039 | pci_set_power_state(pci_dev, PCI_D3hot); | |
4040 | pci_set_power_state(pci_dev, PCI_D0); | |
4041 | pci_restore_state(pci_dev); | |
4042 | ||
4043 | but we can't use these nice canned kernel routines on | |
4044 | kexec, because they also check the MSI/MSI-X state in PCI | |
4045 | configuration space and do the wrong thing when it is | |
4046 | set/cleared. Also, the pci_save/restore_state functions | |
4047 | violate the ordering requirements for restoring the | |
4048 | configuration space from the CCISS document (see the | |
4049 | comment below). So we roll our own .... */ | |
4050 | ||
4051 | for (i = 0; i < 32; i++) | |
4052 | pci_read_config_word(pdev, 2*i, &saved_config_space[i]); | |
4053 | ||
4054 | pos = pci_find_capability(pdev, PCI_CAP_ID_PM); | |
4055 | if (pos == 0) { | |
4056 | printk(KERN_ERR "cciss_reset_controller: PCI PM not supported\n"); | |
4057 | return -ENODEV; | |
4058 | } | |
4059 | ||
4060 | /* Quoting from the Open CISS Specification: "The Power | |
4061 | * Management Control/Status Register (CSR) controls the power | |
4062 | * state of the device. The normal operating state is D0, | |
4063 | * CSR=00h. The software off state is D3, CSR=03h. To reset | |
4064 | * the controller, place the interface device in D3 then to | |
4065 | * D0, this causes a secondary PCI reset which will reset the | |
4066 | * controller." */ | |
4067 | ||
4068 | /* enter the D3hot power management state */ | |
4069 | pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr); | |
4070 | pmcsr &= ~PCI_PM_CTRL_STATE_MASK; | |
4071 | pmcsr |= PCI_D3hot; | |
4072 | pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); | |
4073 | ||
4074 | schedule_timeout_uninterruptible(HZ >> 1); | |
4075 | ||
4076 | /* enter the D0 power management state */ | |
4077 | pmcsr &= ~PCI_PM_CTRL_STATE_MASK; | |
4078 | pmcsr |= PCI_D0; | |
4079 | pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); | |
4080 | ||
4081 | schedule_timeout_uninterruptible(HZ >> 1); | |
4082 | ||
4083 | /* Restore the PCI configuration space. The Open CISS | |
4084 | * Specification says, "Restore the PCI Configuration | |
4085 | * Registers, offsets 00h through 60h. It is important to | |
4086 | * restore the command register, 16-bits at offset 04h, | |
4087 | * last. Do not restore the configuration status register, | |
4088 | * 16-bits at offset 06h." Note that the offset is 2*i. */ | |
4089 | for (i = 0; i < 32; i++) { | |
4090 | if (i == 2 || i == 3) | |
4091 | continue; | |
4092 | pci_write_config_word(pdev, 2*i, saved_config_space[i]); | |
4093 | } | |
4094 | wmb(); | |
4095 | pci_write_config_word(pdev, 4, saved_config_space[2]); | |
4096 | ||
4097 | return 0; | |
4098 | } | |
4099 | ||
1da177e4 LT |
4100 | /* |
4101 | * This is it. Find all the controllers and register them. I really hate | |
4102 | * stealing all these major device numbers. | |
4103 | * returns the number of block devices registered. | |
4104 | */ | |
4105 | static int __devinit cciss_init_one(struct pci_dev *pdev, | |
7c832835 | 4106 | const struct pci_device_id *ent) |
1da177e4 | 4107 | { |
1da177e4 | 4108 | int i; |
799202cb | 4109 | int j = 0; |
1da177e4 | 4110 | int rc; |
22bece00 | 4111 | int dac, return_code; |
212a5026 | 4112 | InquiryData_struct *inq_buff; |
1da177e4 | 4113 | |
82eb03cf CC |
4114 | if (reset_devices) { |
4115 | /* Reset the controller with a PCI power-cycle */ | |
4116 | if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev)) | |
4117 | return -ENODEV; | |
4118 | ||
5e18cfd0 JA |
4119 | /* Now try to get the controller to respond to a no-op. Some |
4120 | devices (notably the HP Smart Array 5i Controller) need | |
4121 | up to 30 seconds to respond. */ | |
5e4c91c8 | 4122 | for (i=0; i<30; i++) { |
82eb03cf CC |
4123 | if (cciss_noop(pdev) == 0) |
4124 | break; | |
5e4c91c8 JA |
4125 | |
4126 | schedule_timeout_uninterruptible(HZ); | |
4127 | } | |
4128 | if (i == 30) { | |
4129 | printk(KERN_ERR "cciss: controller seems dead\n"); | |
4130 | return -EBUSY; | |
82eb03cf CC |
4131 | } |
4132 | } | |
4133 | ||
1da177e4 | 4134 | i = alloc_cciss_hba(); |
7c832835 | 4135 | if (i < 0) |
e2019b58 | 4136 | return -1; |
1f8ef380 MM |
4137 | |
4138 | hba[i]->busy_initializing = 1; | |
8a3173de JA |
4139 | INIT_HLIST_HEAD(&hba[i]->cmpQ); |
4140 | INIT_HLIST_HEAD(&hba[i]->reqQ); | |
b368c9dd | 4141 | mutex_init(&hba[i]->busy_shutting_down); |
1f8ef380 | 4142 | |
1da177e4 | 4143 | if (cciss_pci_init(hba[i], pdev) != 0) |
7fe06326 | 4144 | goto clean0; |
1da177e4 LT |
4145 | |
4146 | sprintf(hba[i]->devname, "cciss%d", i); | |
4147 | hba[i]->ctlr = i; | |
4148 | hba[i]->pdev = pdev; | |
4149 | ||
b368c9dd AP |
4150 | init_completion(&hba[i]->scan_wait); |
4151 | ||
7fe06326 AP |
4152 | if (cciss_create_hba_sysfs_entry(hba[i])) |
4153 | goto clean0; | |
4154 | ||
1da177e4 | 4155 | /* configure PCI DMA stuff */ |
6a35528a | 4156 | if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) |
40aabb58 | 4157 | dac = 1; |
284901a9 | 4158 | else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) |
40aabb58 | 4159 | dac = 0; |
1da177e4 | 4160 | else { |
40aabb58 | 4161 | printk(KERN_ERR "cciss: no suitable DMA available\n"); |
1da177e4 LT |
4162 | goto clean1; |
4163 | } | |
4164 | ||
4165 | /* | |
4166 | * register with the major number, or get a dynamic major number | |
4167 | * by passing 0 as argument. This is done for greater than | |
4168 | * 8 controller support. | |
4169 | */ | |
4170 | if (i < MAX_CTLR_ORIG) | |
564de74a | 4171 | hba[i]->major = COMPAQ_CISS_MAJOR + i; |
1da177e4 | 4172 | rc = register_blkdev(hba[i]->major, hba[i]->devname); |
7c832835 | 4173 | if (rc == -EBUSY || rc == -EINVAL) { |
1da177e4 | 4174 | printk(KERN_ERR |
7c832835 BH |
4175 | "cciss: Unable to get major number %d for %s " |
4176 | "on hba %d\n", hba[i]->major, hba[i]->devname, i); | |
1da177e4 | 4177 | goto clean1; |
7c832835 | 4178 | } else { |
1da177e4 LT |
4179 | if (i >= MAX_CTLR_ORIG) |
4180 | hba[i]->major = rc; | |
4181 | } | |
4182 | ||
4183 | /* make sure the board interrupts are off */ | |
4184 | hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_OFF); | |
7c832835 | 4185 | if (request_irq(hba[i]->intr[SIMPLE_MODE_INT], do_cciss_intr, |
69ab3912 | 4186 | IRQF_DISABLED | IRQF_SHARED, hba[i]->devname, hba[i])) { |
1da177e4 | 4187 | printk(KERN_ERR "cciss: Unable to get irq %d for %s\n", |
7c832835 | 4188 | hba[i]->intr[SIMPLE_MODE_INT], hba[i]->devname); |
1da177e4 LT |
4189 | goto clean2; |
4190 | } | |
40aabb58 BH |
4191 | |
4192 | printk(KERN_INFO "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n", | |
7c832835 BH |
4193 | hba[i]->devname, pdev->device, pci_name(pdev), |
4194 | hba[i]->intr[SIMPLE_MODE_INT], dac ? "" : " not"); | |
4195 | ||
4196 | hba[i]->cmd_pool_bits = | |
061837bc JL |
4197 | kmalloc(DIV_ROUND_UP(hba[i]->nr_cmds, BITS_PER_LONG) |
4198 | * sizeof(unsigned long), GFP_KERNEL); | |
7c832835 BH |
4199 | hba[i]->cmd_pool = (CommandList_struct *) |
4200 | pci_alloc_consistent(hba[i]->pdev, | |
f880632f | 4201 | hba[i]->nr_cmds * sizeof(CommandList_struct), |
7c832835 BH |
4202 | &(hba[i]->cmd_pool_dhandle)); |
4203 | hba[i]->errinfo_pool = (ErrorInfo_struct *) | |
4204 | pci_alloc_consistent(hba[i]->pdev, | |
f880632f | 4205 | hba[i]->nr_cmds * sizeof(ErrorInfo_struct), |
7c832835 BH |
4206 | &(hba[i]->errinfo_pool_dhandle)); |
4207 | if ((hba[i]->cmd_pool_bits == NULL) | |
4208 | || (hba[i]->cmd_pool == NULL) | |
4209 | || (hba[i]->errinfo_pool == NULL)) { | |
4210 | printk(KERN_ERR "cciss: out of memory"); | |
1da177e4 LT |
4211 | goto clean4; |
4212 | } | |
1da177e4 | 4213 | spin_lock_init(&hba[i]->lock); |
1da177e4 | 4214 | |
7c832835 BH |
4215 | /* Initialize the pdev driver private data. |
4216 | have it point to hba[i]. */ | |
1da177e4 | 4217 | pci_set_drvdata(pdev, hba[i]); |
7c832835 BH |
4218 | /* command and error info recs zeroed out before |
4219 | they are used */ | |
4220 | memset(hba[i]->cmd_pool_bits, 0, | |
061837bc JL |
4221 | DIV_ROUND_UP(hba[i]->nr_cmds, BITS_PER_LONG) |
4222 | * sizeof(unsigned long)); | |
1da177e4 | 4223 | |
6ae5ce8e MM |
4224 | hba[i]->num_luns = 0; |
4225 | hba[i]->highest_lun = -1; | |
4226 | for (j = 0; j < CISS_MAX_LUN; j++) { | |
4227 | hba[i]->drv[j].raid_level = -1; | |
4228 | hba[i]->drv[j].queue = NULL; | |
4229 | hba[i]->gendisk[j] = NULL; | |
4230 | } | |
1da177e4 LT |
4231 | |
4232 | cciss_scsi_setup(i); | |
4233 | ||
4234 | /* Turn the interrupts on so we can service requests */ | |
4235 | hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_ON); | |
4236 | ||
22bece00 MM |
4237 | /* Get the firmware version */ |
4238 | inq_buff = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL); | |
4239 | if (inq_buff == NULL) { | |
4240 | printk(KERN_ERR "cciss: out of memory\n"); | |
4241 | goto clean4; | |
4242 | } | |
4243 | ||
4244 | return_code = sendcmd_withirq(CISS_INQUIRY, i, inq_buff, | |
b57695fe | 4245 | sizeof(InquiryData_struct), 0, CTLR_LUNID, TYPE_CMD); |
22bece00 MM |
4246 | if (return_code == IO_OK) { |
4247 | hba[i]->firm_ver[0] = inq_buff->data_byte[32]; | |
4248 | hba[i]->firm_ver[1] = inq_buff->data_byte[33]; | |
4249 | hba[i]->firm_ver[2] = inq_buff->data_byte[34]; | |
4250 | hba[i]->firm_ver[3] = inq_buff->data_byte[35]; | |
4251 | } else { /* send command failed */ | |
4252 | printk(KERN_WARNING "cciss: unable to determine firmware" | |
4253 | " version of controller\n"); | |
4254 | } | |
212a5026 | 4255 | kfree(inq_buff); |
22bece00 | 4256 | |
1da177e4 | 4257 | cciss_procinit(i); |
92c4231a MM |
4258 | |
4259 | hba[i]->cciss_max_sectors = 2048; | |
4260 | ||
2d11d993 | 4261 | rebuild_lun_table(hba[i], 1, 0); |
b368c9dd | 4262 | hba[i]->busy_initializing = 0; |
e2019b58 | 4263 | return 1; |
1da177e4 | 4264 | |
6ae5ce8e | 4265 | clean4: |
6044ec88 | 4266 | kfree(hba[i]->cmd_pool_bits); |
7c832835 | 4267 | if (hba[i]->cmd_pool) |
1da177e4 | 4268 | pci_free_consistent(hba[i]->pdev, |
f880632f | 4269 | hba[i]->nr_cmds * sizeof(CommandList_struct), |
7c832835 BH |
4270 | hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle); |
4271 | if (hba[i]->errinfo_pool) | |
1da177e4 | 4272 | pci_free_consistent(hba[i]->pdev, |
f880632f | 4273 | hba[i]->nr_cmds * sizeof(ErrorInfo_struct), |
7c832835 BH |
4274 | hba[i]->errinfo_pool, |
4275 | hba[i]->errinfo_pool_dhandle); | |
fb86a35b | 4276 | free_irq(hba[i]->intr[SIMPLE_MODE_INT], hba[i]); |
6ae5ce8e | 4277 | clean2: |
1da177e4 | 4278 | unregister_blkdev(hba[i]->major, hba[i]->devname); |
6ae5ce8e | 4279 | clean1: |
7fe06326 AP |
4280 | cciss_destroy_hba_sysfs_entry(hba[i]); |
4281 | clean0: | |
1f8ef380 | 4282 | hba[i]->busy_initializing = 0; |
799202cb MM |
4283 | /* cleanup any queues that may have been initialized */ |
4284 | for (j=0; j <= hba[i]->highest_lun; j++){ | |
4285 | drive_info_struct *drv = &(hba[i]->drv[j]); | |
4286 | if (drv->queue) | |
4287 | blk_cleanup_queue(drv->queue); | |
4288 | } | |
872225ca MM |
4289 | /* |
4290 | * Deliberately omit pci_disable_device(): it does something nasty to | |
4291 | * Smart Array controllers that pci_enable_device does not undo | |
4292 | */ | |
799202cb | 4293 | pci_release_regions(pdev); |
799202cb | 4294 | pci_set_drvdata(pdev, NULL); |
61808c2b | 4295 | free_hba(i); |
e2019b58 | 4296 | return -1; |
1da177e4 LT |
4297 | } |
4298 | ||
e9ca75b5 | 4299 | static void cciss_shutdown(struct pci_dev *pdev) |
1da177e4 LT |
4300 | { |
4301 | ctlr_info_t *tmp_ptr; | |
e9ca75b5 | 4302 | int i; |
1da177e4 | 4303 | char flush_buf[4]; |
7c832835 | 4304 | int return_code; |
1da177e4 | 4305 | |
e9ca75b5 GB |
4306 | tmp_ptr = pci_get_drvdata(pdev); |
4307 | if (tmp_ptr == NULL) | |
4308 | return; | |
4309 | i = tmp_ptr->ctlr; | |
4310 | if (hba[i] == NULL) | |
4311 | return; | |
4312 | ||
4313 | /* Turn board interrupts off and send the flush cache command */ | |
4314 | /* sendcmd will turn off interrupt, and send the flush... | |
4315 | * To write all data in the battery backed cache to disks */ | |
4316 | memset(flush_buf, 0, 4); | |
b57695fe | 4317 | return_code = sendcmd(CCISS_CACHE_FLUSH, i, flush_buf, 4, 0, |
4318 | CTLR_LUNID, TYPE_CMD); | |
e9ca75b5 GB |
4319 | if (return_code == IO_OK) { |
4320 | printk(KERN_INFO "Completed flushing cache on controller %d\n", i); | |
4321 | } else { | |
4322 | printk(KERN_WARNING "Error flushing cache on controller %d\n", i); | |
4323 | } | |
4324 | free_irq(hba[i]->intr[2], hba[i]); | |
4325 | } | |
4326 | ||
4327 | static void __devexit cciss_remove_one(struct pci_dev *pdev) | |
4328 | { | |
4329 | ctlr_info_t *tmp_ptr; | |
4330 | int i, j; | |
4331 | ||
7c832835 BH |
4332 | if (pci_get_drvdata(pdev) == NULL) { |
4333 | printk(KERN_ERR "cciss: Unable to remove device \n"); | |
1da177e4 LT |
4334 | return; |
4335 | } | |
0a9279cc | 4336 | |
1da177e4 LT |
4337 | tmp_ptr = pci_get_drvdata(pdev); |
4338 | i = tmp_ptr->ctlr; | |
7c832835 | 4339 | if (hba[i] == NULL) { |
1da177e4 | 4340 | printk(KERN_ERR "cciss: device appears to " |
7c832835 | 4341 | "already be removed \n"); |
1da177e4 LT |
4342 | return; |
4343 | } | |
b6550777 | 4344 | |
b368c9dd | 4345 | mutex_lock(&hba[i]->busy_shutting_down); |
0a9279cc | 4346 | |
b368c9dd | 4347 | remove_from_scan_list(hba[i]); |
b6550777 BH |
4348 | remove_proc_entry(hba[i]->devname, proc_cciss); |
4349 | unregister_blkdev(hba[i]->major, hba[i]->devname); | |
4350 | ||
4351 | /* remove it from the disk list */ | |
4352 | for (j = 0; j < CISS_MAX_LUN; j++) { | |
4353 | struct gendisk *disk = hba[i]->gendisk[j]; | |
4354 | if (disk) { | |
165125e1 | 4355 | struct request_queue *q = disk->queue; |
b6550777 | 4356 | |
097d0264 | 4357 | if (disk->flags & GENHD_FL_UP) { |
8ce51966 | 4358 | cciss_destroy_ld_sysfs_entry(hba[i], j, 1); |
b6550777 | 4359 | del_gendisk(disk); |
097d0264 | 4360 | } |
b6550777 BH |
4361 | if (q) |
4362 | blk_cleanup_queue(q); | |
4363 | } | |
4364 | } | |
4365 | ||
ba198efb | 4366 | #ifdef CONFIG_CISS_SCSI_TAPE |
b6550777 | 4367 | cciss_unregister_scsi(i); /* unhook from SCSI subsystem */ |
ba198efb | 4368 | #endif |
b6550777 | 4369 | |
e9ca75b5 | 4370 | cciss_shutdown(pdev); |
fb86a35b MM |
4371 | |
4372 | #ifdef CONFIG_PCI_MSI | |
7c832835 BH |
4373 | if (hba[i]->msix_vector) |
4374 | pci_disable_msix(hba[i]->pdev); | |
4375 | else if (hba[i]->msi_vector) | |
4376 | pci_disable_msi(hba[i]->pdev); | |
4377 | #endif /* CONFIG_PCI_MSI */ | |
fb86a35b | 4378 | |
1da177e4 | 4379 | iounmap(hba[i]->vaddr); |
1da177e4 | 4380 | |
f880632f | 4381 | pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(CommandList_struct), |
1da177e4 | 4382 | hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle); |
f880632f | 4383 | pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(ErrorInfo_struct), |
7c832835 | 4384 | hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle); |
1da177e4 | 4385 | kfree(hba[i]->cmd_pool_bits); |
872225ca MM |
4386 | /* |
4387 | * Deliberately omit pci_disable_device(): it does something nasty to | |
4388 | * Smart Array controllers that pci_enable_device does not undo | |
4389 | */ | |
7c832835 | 4390 | pci_release_regions(pdev); |
4e570309 | 4391 | pci_set_drvdata(pdev, NULL); |
7fe06326 | 4392 | cciss_destroy_hba_sysfs_entry(hba[i]); |
b368c9dd | 4393 | mutex_unlock(&hba[i]->busy_shutting_down); |
1da177e4 | 4394 | free_hba(i); |
7c832835 | 4395 | } |
1da177e4 LT |
4396 | |
4397 | static struct pci_driver cciss_pci_driver = { | |
7c832835 BH |
4398 | .name = "cciss", |
4399 | .probe = cciss_init_one, | |
4400 | .remove = __devexit_p(cciss_remove_one), | |
4401 | .id_table = cciss_pci_device_id, /* id_table */ | |
e9ca75b5 | 4402 | .shutdown = cciss_shutdown, |
1da177e4 LT |
4403 | }; |
4404 | ||
4405 | /* | |
4406 | * This is it. Register the PCI driver information for the cards we control | |
7c832835 | 4407 | * the OS will call our registered routines when it finds one of our cards. |
1da177e4 LT |
4408 | */ |
4409 | static int __init cciss_init(void) | |
4410 | { | |
7fe06326 AP |
4411 | int err; |
4412 | ||
10cbda97 JA |
4413 | /* |
4414 | * The hardware requires that commands are aligned on a 64-bit | |
4415 | * boundary. Given that we use pci_alloc_consistent() to allocate an | |
4416 | * array of them, the size must be a multiple of 8 bytes. | |
4417 | */ | |
4418 | BUILD_BUG_ON(sizeof(CommandList_struct) % 8); | |
4419 | ||
1da177e4 LT |
4420 | printk(KERN_INFO DRIVER_NAME "\n"); |
4421 | ||
7fe06326 AP |
4422 | err = bus_register(&cciss_bus_type); |
4423 | if (err) | |
4424 | return err; | |
4425 | ||
b368c9dd AP |
4426 | /* Start the scan thread */ |
4427 | cciss_scan_thread = kthread_run(scan_thread, NULL, "cciss_scan"); | |
4428 | if (IS_ERR(cciss_scan_thread)) { | |
4429 | err = PTR_ERR(cciss_scan_thread); | |
4430 | goto err_bus_unregister; | |
4431 | } | |
4432 | ||
1da177e4 | 4433 | /* Register for our PCI devices */ |
7fe06326 AP |
4434 | err = pci_register_driver(&cciss_pci_driver); |
4435 | if (err) | |
b368c9dd | 4436 | goto err_thread_stop; |
7fe06326 | 4437 | |
617e1344 | 4438 | return err; |
7fe06326 | 4439 | |
b368c9dd AP |
4440 | err_thread_stop: |
4441 | kthread_stop(cciss_scan_thread); | |
4442 | err_bus_unregister: | |
7fe06326 | 4443 | bus_unregister(&cciss_bus_type); |
b368c9dd | 4444 | |
7fe06326 | 4445 | return err; |
1da177e4 LT |
4446 | } |
4447 | ||
4448 | static void __exit cciss_cleanup(void) | |
4449 | { | |
4450 | int i; | |
4451 | ||
4452 | pci_unregister_driver(&cciss_pci_driver); | |
4453 | /* double check that all controller entrys have been removed */ | |
7c832835 BH |
4454 | for (i = 0; i < MAX_CTLR; i++) { |
4455 | if (hba[i] != NULL) { | |
1da177e4 | 4456 | printk(KERN_WARNING "cciss: had to remove" |
7c832835 | 4457 | " controller %d\n", i); |
1da177e4 LT |
4458 | cciss_remove_one(hba[i]->pdev); |
4459 | } | |
4460 | } | |
b368c9dd | 4461 | kthread_stop(cciss_scan_thread); |
928b4d8c | 4462 | remove_proc_entry("driver/cciss", NULL); |
7fe06326 | 4463 | bus_unregister(&cciss_bus_type); |
1da177e4 LT |
4464 | } |
4465 | ||
33079b21 MM |
4466 | static void fail_all_cmds(unsigned long ctlr) |
4467 | { | |
4468 | /* If we get here, the board is apparently dead. */ | |
4469 | ctlr_info_t *h = hba[ctlr]; | |
4470 | CommandList_struct *c; | |
4471 | unsigned long flags; | |
4472 | ||
4473 | printk(KERN_WARNING "cciss%d: controller not responding.\n", h->ctlr); | |
7c832835 | 4474 | h->alive = 0; /* the controller apparently died... */ |
33079b21 MM |
4475 | |
4476 | spin_lock_irqsave(CCISS_LOCK(ctlr), flags); | |
4477 | ||
7c832835 | 4478 | pci_disable_device(h->pdev); /* Make sure it is really dead. */ |
33079b21 MM |
4479 | |
4480 | /* move everything off the request queue onto the completed queue */ | |
8a3173de JA |
4481 | while (!hlist_empty(&h->reqQ)) { |
4482 | c = hlist_entry(h->reqQ.first, CommandList_struct, list); | |
4483 | removeQ(c); | |
33079b21 | 4484 | h->Qdepth--; |
8a3173de | 4485 | addQ(&h->cmpQ, c); |
33079b21 MM |
4486 | } |
4487 | ||
4488 | /* Now, fail everything on the completed queue with a HW error */ | |
8a3173de JA |
4489 | while (!hlist_empty(&h->cmpQ)) { |
4490 | c = hlist_entry(h->cmpQ.first, CommandList_struct, list); | |
4491 | removeQ(c); | |
b59e64d0 HR |
4492 | if (c->cmd_type != CMD_MSG_STALE) |
4493 | c->err_info->CommandStatus = CMD_HARDWARE_ERR; | |
33079b21 MM |
4494 | if (c->cmd_type == CMD_RWREQ) { |
4495 | complete_command(h, c, 0); | |
4496 | } else if (c->cmd_type == CMD_IOCTL_PEND) | |
4497 | complete(c->waiting); | |
4498 | #ifdef CONFIG_CISS_SCSI_TAPE | |
7c832835 BH |
4499 | else if (c->cmd_type == CMD_SCSI) |
4500 | complete_scsi_command(c, 0, 0); | |
33079b21 MM |
4501 | #endif |
4502 | } | |
4503 | spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); | |
4504 | return; | |
4505 | } | |
4506 | ||
1da177e4 LT |
4507 | module_init(cciss_init); |
4508 | module_exit(cciss_cleanup); |