[linux.git] / include / linux / ptrace.h

#ifndef _LINUX_PTRACE_H
#define _LINUX_PTRACE_H
/* ptrace.h */
/* structs and defines to help the user use the ptrace system call. */

/* has the defines to get at the registers. */

#define PTRACE_TRACEME		   0
#define PTRACE_PEEKTEXT		   1
#define PTRACE_PEEKDATA		   2
#define PTRACE_PEEKUSR		   3
#define PTRACE_POKETEXT		   4
#define PTRACE_POKEDATA		   5
#define PTRACE_POKEUSR		   6
#define PTRACE_CONT		   7
#define PTRACE_KILL		   8
#define PTRACE_SINGLESTEP	   9

#define PTRACE_ATTACH		  16
#define PTRACE_DETACH		  17

#define PTRACE_SYSCALL		  24

/* 0x4200-0x4300 are reserved for architecture-independent additions.  */
#define PTRACE_SETOPTIONS	0x4200
#define PTRACE_GETEVENTMSG	0x4201
#define PTRACE_GETSIGINFO	0x4202
#define PTRACE_SETSIGINFO	0x4203

/*
 * Generic ptrace interface that exports the architecture specific regsets
 * using the corresponding NT_* types (which are also used in the core dump).
 * Please note that the NT_PRSTATUS note type in a core dump contains a full
 * 'struct elf_prstatus'. But the user_regset for NT_PRSTATUS contains just the
 * elf_gregset_t that is the pr_reg field of 'struct elf_prstatus'. For all the
 * other user_regset flavors, the user_regset layout and the ELF core dump note
 * payload are exactly the same layout.
 *
 * This interface usage is as follows:
 *	struct iovec iov = { buf, len};
 *
 *	ret = ptrace(PTRACE_GETREGSET/PTRACE_SETREGSET, pid, NT_XXX_TYPE, &iov);
 *
 * On the successful completion, iov.len will be updated by the kernel,
 * specifying how much the kernel has written/read to/from the user's iov.buf.
 */
#define PTRACE_GETREGSET	0x4204
#define PTRACE_SETREGSET	0x4205

#define PTRACE_SEIZE		0x4206
#define PTRACE_INTERRUPT	0x4207
#define PTRACE_LISTEN		0x4208

/* Wait extended result codes for the above trace options.  */
#define PTRACE_EVENT_FORK	1
#define PTRACE_EVENT_VFORK	2
#define PTRACE_EVENT_CLONE	3
#define PTRACE_EVENT_EXEC	4
#define PTRACE_EVENT_VFORK_DONE	5
#define PTRACE_EVENT_EXIT	6
#define PTRACE_EVENT_SECCOMP	7
/* Extended result codes which enabled by means other than options.  */
#define PTRACE_EVENT_STOP	128

/* Options set using PTRACE_SETOPTIONS or using PTRACE_SEIZE @data param */
#define PTRACE_O_TRACESYSGOOD	1
#define PTRACE_O_TRACEFORK	(1 << PTRACE_EVENT_FORK)
#define PTRACE_O_TRACEVFORK	(1 << PTRACE_EVENT_VFORK)
#define PTRACE_O_TRACECLONE	(1 << PTRACE_EVENT_CLONE)
#define PTRACE_O_TRACEEXEC	(1 << PTRACE_EVENT_EXEC)
#define PTRACE_O_TRACEVFORKDONE	(1 << PTRACE_EVENT_VFORK_DONE)
#define PTRACE_O_TRACEEXIT	(1 << PTRACE_EVENT_EXIT)
#define PTRACE_O_TRACESECCOMP	(1 << PTRACE_EVENT_SECCOMP)

#define PTRACE_O_MASK		0x000000ff

#include <asm/ptrace.h>

#ifdef __KERNEL__
/*
 * Ptrace flags
 *
 * The owner ship rules for task->ptrace which holds the ptrace
 * flags is simple.  When a task is running it owns it's task->ptrace
 * flags.  When the a task is stopped the ptracer owns task->ptrace.
 */

#define PT_SEIZED	0x00010000	/* SEIZE used, enable new behavior */
#define PT_PTRACED	0x00000001
#define PT_DTRACE	0x00000002	/* delayed trace (used on m68k, i386) */
#define PT_PTRACE_CAP	0x00000004	/* ptracer can follow suid-exec */

#define PT_OPT_FLAG_SHIFT	3
/* PT_TRACE_* event enable flags */
#define PT_EVENT_FLAG(event)	(1 << (PT_OPT_FLAG_SHIFT + (event)))
#define PT_TRACESYSGOOD		PT_EVENT_FLAG(0)
#define PT_TRACE_FORK		PT_EVENT_FLAG(PTRACE_EVENT_FORK)
#define PT_TRACE_VFORK		PT_EVENT_FLAG(PTRACE_EVENT_VFORK)
#define PT_TRACE_CLONE		PT_EVENT_FLAG(PTRACE_EVENT_CLONE)
#define PT_TRACE_EXEC		PT_EVENT_FLAG(PTRACE_EVENT_EXEC)
#define PT_TRACE_VFORK_DONE	PT_EVENT_FLAG(PTRACE_EVENT_VFORK_DONE)
#define PT_TRACE_EXIT		PT_EVENT_FLAG(PTRACE_EVENT_EXIT)
#define PT_TRACE_SECCOMP	PT_EVENT_FLAG(PTRACE_EVENT_SECCOMP)

/* single stepping state bits (used on ARM and PA-RISC) */
#define PT_SINGLESTEP_BIT	31
#define PT_SINGLESTEP		(1<<PT_SINGLESTEP_BIT)
#define PT_BLOCKSTEP_BIT	30
#define PT_BLOCKSTEP		(1<<PT_BLOCKSTEP_BIT)

#include <linux/compiler.h>		/* For unlikely.  */
#include <linux/sched.h>		/* For struct task_struct.  */
#include <linux/err.h>			/* for IS_ERR_VALUE */
#include <linux/bug.h>			/* For BUG_ON.  */


extern long arch_ptrace(struct task_struct *child, long request,
			unsigned long addr, unsigned long data);
extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len);
extern int ptrace_writedata(struct task_struct *tsk, char __user *src, unsigned long dst, int len);
extern void ptrace_disable(struct task_struct *);
extern int ptrace_check_attach(struct task_struct *task, bool ignore_state);
extern int ptrace_request(struct task_struct *child, long request,
			  unsigned long addr, unsigned long data);
extern void ptrace_notify(int exit_code);
extern void __ptrace_link(struct task_struct *child,
			  struct task_struct *new_parent);
extern void __ptrace_unlink(struct task_struct *child);
extern void exit_ptrace(struct task_struct *tracer);
#define PTRACE_MODE_READ	0x01
#define PTRACE_MODE_ATTACH	0x02
#define PTRACE_MODE_NOAUDIT	0x04
/* Returns 0 on success, -errno on denial. */
extern int __ptrace_may_access(struct task_struct *task, unsigned int mode);
/* Returns true on success, false on denial. */
extern bool ptrace_may_access(struct task_struct *task, unsigned int mode);

static inline int ptrace_reparented(struct task_struct *child)
{
	return !same_thread_group(child->real_parent, child->parent);
}

static inline void ptrace_unlink(struct task_struct *child)
{
	if (unlikely(child->ptrace))
		__ptrace_unlink(child);
}

int generic_ptrace_peekdata(struct task_struct *tsk, unsigned long addr,
			    unsigned long data);
int generic_ptrace_pokedata(struct task_struct *tsk, unsigned long addr,
			    unsigned long data);

/**
 * ptrace_parent - return the task that is tracing the given task
 * @task: task to consider
 *
 * Returns %NULL if no one is tracing @task, or the &struct task_struct
 * pointer to its tracer.
 *
 * Must called under rcu_read_lock().  The pointer returned might be kept
 * live only by RCU.  During exec, this may be called with task_lock() held
 * on @task, still held from when check_unsafe_exec() was called.
 */
static inline struct task_struct *ptrace_parent(struct task_struct *task)
{
	if (unlikely(task->ptrace))
		return rcu_dereference(task->parent);
	return NULL;
}

/**
 * ptrace_event_enabled - test whether a ptrace event is enabled
 * @task: ptracee of interest
 * @event: %PTRACE_EVENT_* to test
 *
 * Test whether @event is enabled for ptracee @task.
 *
 * Returns %true if @event is enabled, %false otherwise.
 */
static inline bool ptrace_event_enabled(struct task_struct *task, int event)
{
	return task->ptrace & PT_EVENT_FLAG(event);
}

/**
 * ptrace_event - possibly stop for a ptrace event notification
 * @event:	%PTRACE_EVENT_* value to report
 * @message:	value for %PTRACE_GETEVENTMSG to return
 *
 * Check whether @event is enabled and, if so, report @event and @message
 * to the ptrace parent.
 *
 * Called without locks.
 */
static inline void ptrace_event(int event, unsigned long message)
{
	if (unlikely(ptrace_event_enabled(current, event))) {
		current->ptrace_message = message;
		ptrace_notify((event << 8) | SIGTRAP);
	} else if (event == PTRACE_EVENT_EXEC) {
		/* legacy EXEC report via SIGTRAP */
		if ((current->ptrace & (PT_PTRACED|PT_SEIZED)) == PT_PTRACED)
			send_sig(SIGTRAP, current, 0);
	}
}

/**
 * ptrace_init_task - initialize ptrace state for a new child
 * @child:		new child task
 * @ptrace:		true if child should be ptrace'd by parent's tracer
 *
 * This is called immediately after adding @child to its parent's children
 * list.  @ptrace is false in the normal case, and true to ptrace @child.
 *
 * Called with current's siglock and write_lock_irq(&tasklist_lock) held.
 */
static inline void ptrace_init_task(struct task_struct *child, bool ptrace)
{
	INIT_LIST_HEAD(&child->ptrace_entry);
	INIT_LIST_HEAD(&child->ptraced);
#ifdef CONFIG_HAVE_HW_BREAKPOINT
	atomic_set(&child->ptrace_bp_refcnt, 1);
#endif
	child->jobctl = 0;
	child->ptrace = 0;
	child->parent = child->real_parent;

	if (unlikely(ptrace) && current->ptrace) {
		child->ptrace = current->ptrace;
		__ptrace_link(child, current->parent);

		if (child->ptrace & PT_SEIZED)
			task_set_jobctl_pending(child, JOBCTL_TRAP_STOP);
		else
			sigaddset(&child->pending.signal, SIGSTOP);

		set_tsk_thread_flag(child, TIF_SIGPENDING);
	}
}

/**
 * ptrace_release_task - final ptrace-related cleanup of a zombie being reaped
 * @task:	task in %EXIT_DEAD state
 *
 * Called with write_lock(&tasklist_lock) held.
 */
static inline void ptrace_release_task(struct task_struct *task)
{
	BUG_ON(!list_empty(&task->ptraced));
	ptrace_unlink(task);
	BUG_ON(!list_empty(&task->ptrace_entry));
}

#ifndef force_successful_syscall_return
/*
 * System call handlers that, upon successful completion, need to return a
 * negative value should call force_successful_syscall_return() right before
 * returning.  On architectures where the syscall convention provides for a
 * separate error flag (e.g., alpha, ia64, ppc{,64}, sparc{,64}, possibly
 * others), this macro can be used to ensure that the error flag will not get
 * set.  On architectures which do not support a separate error flag, the macro
 * is a no-op and the spurious error condition needs to be filtered out by some
 * other means (e.g., in user-level, by passing an extra argument to the
 * syscall handler, or something along those lines).
 */
#define force_successful_syscall_return() do { } while (0)
#endif

#ifndef is_syscall_success
/*
 * On most systems we can tell if a syscall is a success based on if the retval
 * is an error value.  On some systems like ia64 and powerpc they have different
 * indicators of success/failure and must define their own.
 */
#define is_syscall_success(regs) (!IS_ERR_VALUE((unsigned long)(regs_return_value(regs))))
#endif

/*
 * <asm/ptrace.h> should define the following things inside #ifdef __KERNEL__.
 *
 * These do-nothing inlines are used when the arch does not
 * implement single-step.  The kerneldoc comments are here
 * to document the interface for all arch definitions.
 */

#ifndef arch_has_single_step
/**
 * arch_has_single_step - does this CPU support user-mode single-step?
 *
 * If this is defined, then there must be function declarations or
 * inlines for user_enable_single_step() and user_disable_single_step().
 * arch_has_single_step() should evaluate to nonzero iff the machine
 * supports instruction single-step for user mode.
 * It can be a constant or it can test a CPU feature bit.
 */
#define arch_has_single_step()		(0)

/**
 * user_enable_single_step - single-step in user-mode task
 * @task: either current or a task stopped in %TASK_TRACED
 *
 * This can only be called when arch_has_single_step() has returned nonzero.
 * Set @task so that when it returns to user mode, it will trap after the
 * next single instruction executes.  If arch_has_block_step() is defined,
 * this must clear the effects of user_enable_block_step() too.
 */
static inline void user_enable_single_step(struct task_struct *task)
{
	BUG();			/* This can never be called.  */
}

/**
 * user_disable_single_step - cancel user-mode single-step
 * @task: either current or a task stopped in %TASK_TRACED
 *
 * Clear @task of the effects of user_enable_single_step() and
 * user_enable_block_step().  This can be called whether or not either
 * of those was ever called on @task, and even if arch_has_single_step()
 * returned zero.
 */
static inline void user_disable_single_step(struct task_struct *task)
{
}
#else
extern void user_enable_single_step(struct task_struct *);
extern void user_disable_single_step(struct task_struct *);
#endif	/* arch_has_single_step */

#ifndef arch_has_block_step
/**
 * arch_has_block_step - does this CPU support user-mode block-step?
 *
 * If this is defined, then there must be a function declaration or inline
 * for user_enable_block_step(), and arch_has_single_step() must be defined
 * too.  arch_has_block_step() should evaluate to nonzero iff the machine
 * supports step-until-branch for user mode.  It can be a constant or it
 * can test a CPU feature bit.
 */
#define arch_has_block_step()		(0)

/**
 * user_enable_block_step - step until branch in user-mode task
 * @task: either current or a task stopped in %TASK_TRACED
 *
 * This can only be called when arch_has_block_step() has returned nonzero,
 * and will never be called when single-instruction stepping is being used.
 * Set @task so that when it returns to user mode, it will trap after the
 * next branch or trap taken.
 */
static inline void user_enable_block_step(struct task_struct *task)
{
	BUG();			/* This can never be called.  */
}
#else
extern void user_enable_block_step(struct task_struct *);
#endif	/* arch_has_block_step */

#ifdef ARCH_HAS_USER_SINGLE_STEP_INFO
extern void user_single_step_siginfo(struct task_struct *tsk,
				struct pt_regs *regs, siginfo_t *info);
#else
static inline void user_single_step_siginfo(struct task_struct *tsk,
				struct pt_regs *regs, siginfo_t *info)
{
	memset(info, 0, sizeof(*info));
	info->si_signo = SIGTRAP;
}
#endif

#ifndef arch_ptrace_stop_needed
/**
 * arch_ptrace_stop_needed - Decide whether arch_ptrace_stop() should be called
 * @code:	current->exit_code value ptrace will stop with
 * @info:	siginfo_t pointer (or %NULL) for signal ptrace will stop with
 *
 * This is called with the siglock held, to decide whether or not it's
 * necessary to release the siglock and call arch_ptrace_stop() with the
 * same @code and @info arguments.  It can be defined to a constant if
 * arch_ptrace_stop() is never required, or always is.  On machines where
 * this makes sense, it should be defined to a quick test to optimize out
 * calling arch_ptrace_stop() when it would be superfluous.  For example,
 * if the thread has not been back to user mode since the last stop, the
 * thread state might indicate that nothing needs to be done.
 */
#define arch_ptrace_stop_needed(code, info)	(0)
#endif

#ifndef arch_ptrace_stop
/**
 * arch_ptrace_stop - Do machine-specific work before stopping for ptrace
 * @code:	current->exit_code value ptrace will stop with
 * @info:	siginfo_t pointer (or %NULL) for signal ptrace will stop with
 *
 * This is called with no locks held when arch_ptrace_stop_needed() has
 * just returned nonzero.  It is allowed to block, e.g. for user memory
 * access.  The arch can have machine-specific work to be done before
 * ptrace stops.  On ia64, register backing store gets written back to user
 * memory here.  Since this can be costly (requires dropping the siglock),
 * we only do it when the arch requires it for this particular stop, as
 * indicated by arch_ptrace_stop_needed().
 */
#define arch_ptrace_stop(code, info)		do { } while (0)
#endif

extern int task_current_syscall(struct task_struct *target, long *callno,
				unsigned long args[6], unsigned int maxargs,
				unsigned long *sp, unsigned long *pc);

#ifdef CONFIG_HAVE_HW_BREAKPOINT
extern int ptrace_get_breakpoints(struct task_struct *tsk);
extern void ptrace_put_breakpoints(struct task_struct *tsk);
#else
static inline void ptrace_put_breakpoints(struct task_struct *tsk) { }
#endif /* CONFIG_HAVE_HW_BREAKPOINT */

#endif /* __KERNEL */

#endif
Commit	Line	Data
1da177e4 LT	1	#ifndef _LINUX_PTRACE_H
	2	#define _LINUX_PTRACE_H
	3	/* ptrace.h */
	4	/* structs and defines to help the user use the ptrace system call. */
	5
	6	/* has the defines to get at the registers. */
	7
	8	#define PTRACE_TRACEME 0
	9	#define PTRACE_PEEKTEXT 1
	10	#define PTRACE_PEEKDATA 2
	11	#define PTRACE_PEEKUSR 3
	12	#define PTRACE_POKETEXT 4
	13	#define PTRACE_POKEDATA 5
	14	#define PTRACE_POKEUSR 6
	15	#define PTRACE_CONT 7
	16	#define PTRACE_KILL 8
	17	#define PTRACE_SINGLESTEP 9
	18
416bc512 RM	19	#define PTRACE_ATTACH 16
416bc512 RM	20	#define PTRACE_DETACH 17
1da177e4 LT	21
	22	#define PTRACE_SYSCALL 24
	23
	24	/* 0x4200-0x4300 are reserved for architecture-independent additions. */
	25	#define PTRACE_SETOPTIONS 0x4200
	26	#define PTRACE_GETEVENTMSG 0x4201
	27	#define PTRACE_GETSIGINFO 0x4202
	28	#define PTRACE_SETSIGINFO 0x4203
	29
2225a122 SS	30	/*
	31	* Generic ptrace interface that exports the architecture specific regsets
	32	* using the corresponding NT_* types (which are also used in the core dump).
c6a0dd7e SS	33	* Please note that the NT_PRSTATUS note type in a core dump contains a full
	34	* 'struct elf_prstatus'. But the user_regset for NT_PRSTATUS contains just the
	35	* elf_gregset_t that is the pr_reg field of 'struct elf_prstatus'. For all the
	36	* other user_regset flavors, the user_regset layout and the ELF core dump note
	37	* payload are exactly the same layout.
2225a122 SS	38	*
	39	* This interface usage is as follows:
	40	* struct iovec iov = { buf, len};
	41	*
	42	* ret = ptrace(PTRACE_GETREGSET/PTRACE_SETREGSET, pid, NT_XXX_TYPE, &iov);
	43	*
	44	* On the successful completion, iov.len will be updated by the kernel,
	45	* specifying how much the kernel has written/read to/from the user's iov.buf.
	46	*/
	47	#define PTRACE_GETREGSET 0x4204
	48	#define PTRACE_SETREGSET 0x4205
	49
3544d72a	50	#define PTRACE_SEIZE 0x4206
fca26f26	51	#define PTRACE_INTERRUPT 0x4207
544b2c91	52	#define PTRACE_LISTEN 0x4208
3544d72a	53
1da177e4 LT	54	/* Wait extended result codes for the above trace options. */
	55	#define PTRACE_EVENT_FORK 1
	56	#define PTRACE_EVENT_VFORK 2
	57	#define PTRACE_EVENT_CLONE 3
	58	#define PTRACE_EVENT_EXEC 4
	59	#define PTRACE_EVENT_VFORK_DONE 5
	60	#define PTRACE_EVENT_EXIT 6
fb0fadf9	61	#define PTRACE_EVENT_SECCOMP 7
5cdf389a DV	62	/* Extended result codes which enabled by means other than options. */
5cdf389a DV	63	#define PTRACE_EVENT_STOP 128
1da177e4	64
ee00560c	65	/* Options set using PTRACE_SETOPTIONS or using PTRACE_SEIZE @data param */
86b6c1f3 DV	66	#define PTRACE_O_TRACESYSGOOD 1
	67	#define PTRACE_O_TRACEFORK (1 << PTRACE_EVENT_FORK)
	68	#define PTRACE_O_TRACEVFORK (1 << PTRACE_EVENT_VFORK)
	69	#define PTRACE_O_TRACECLONE (1 << PTRACE_EVENT_CLONE)
	70	#define PTRACE_O_TRACEEXEC (1 << PTRACE_EVENT_EXEC)
	71	#define PTRACE_O_TRACEVFORKDONE (1 << PTRACE_EVENT_VFORK_DONE)
	72	#define PTRACE_O_TRACEEXIT (1 << PTRACE_EVENT_EXIT)
fb0fadf9	73	#define PTRACE_O_TRACESECCOMP (1 << PTRACE_EVENT_SECCOMP)
86b6c1f3	74
fb0fadf9	75	#define PTRACE_O_MASK 0x000000ff
86b6c1f3	76
1da177e4 LT	77	#include <asm/ptrace.h>
	78
	79	#ifdef __KERNEL__
	80	/*
	81	* Ptrace flags
260ea101 EB	82	*
	83	* The owner ship rules for task->ptrace which holds the ptrace
	84	* flags is simple. When a task is running it owns it's task->ptrace
	85	* flags. When the a task is stopped the ptracer owns task->ptrace.
1da177e4 LT	86	*/
1da177e4 LT	87
3544d72a	88	#define PT_SEIZED 0x00010000 /* SEIZE used, enable new behavior */
1da177e4 LT	89	#define PT_PTRACED 0x00000001
1da177e4 LT	90	#define PT_DTRACE 0x00000002 /* delayed trace (used on m68k, i386) */
86b6c1f3	91	#define PT_PTRACE_CAP 0x00000004 /* ptracer can follow suid-exec */
643ad838	92
86b6c1f3	93	#define PT_OPT_FLAG_SHIFT 3
643ad838	94	/* PT_TRACE_* event enable flags */
86b6c1f3 DV	95	#define PT_EVENT_FLAG(event) (1 << (PT_OPT_FLAG_SHIFT + (event)))
86b6c1f3 DV	96	#define PT_TRACESYSGOOD PT_EVENT_FLAG(0)
643ad838 TH	97	#define PT_TRACE_FORK PT_EVENT_FLAG(PTRACE_EVENT_FORK)
	98	#define PT_TRACE_VFORK PT_EVENT_FLAG(PTRACE_EVENT_VFORK)
	99	#define PT_TRACE_CLONE PT_EVENT_FLAG(PTRACE_EVENT_CLONE)
	100	#define PT_TRACE_EXEC PT_EVENT_FLAG(PTRACE_EVENT_EXEC)
	101	#define PT_TRACE_VFORK_DONE PT_EVENT_FLAG(PTRACE_EVENT_VFORK_DONE)
	102	#define PT_TRACE_EXIT PT_EVENT_FLAG(PTRACE_EVENT_EXIT)
fb0fadf9	103	#define PT_TRACE_SECCOMP PT_EVENT_FLAG(PTRACE_EVENT_SECCOMP)
1da177e4	104
1da177e4 LT	105	/* single stepping state bits (used on ARM and PA-RISC) */
	106	#define PT_SINGLESTEP_BIT 31
	107	#define PT_SINGLESTEP (1<<PT_SINGLESTEP_BIT)
	108	#define PT_BLOCKSTEP_BIT 30
	109	#define PT_BLOCKSTEP (1<<PT_BLOCKSTEP_BIT)
	110
	111	#include <linux/compiler.h> /* For unlikely. */
	112	#include <linux/sched.h> /* For struct task_struct. */
d7e7528b	113	#include <linux/err.h> /* for IS_ERR_VALUE */
187f1882	114	#include <linux/bug.h> /* For BUG_ON. */
1da177e4	115
481bed45	116
9b05a69e NK	117	extern long arch_ptrace(struct task_struct *child, long request,
9b05a69e NK	118	unsigned long addr, unsigned long data);
1da177e4 LT	119	extern int ptrace_readdata(struct task_struct tsk, unsigned long src, char __user dst, int len);
1da177e4 LT	120	extern int ptrace_writedata(struct task_struct tsk, char __user src, unsigned long dst, int len);
1da177e4	121	extern void ptrace_disable(struct task_struct *);
755e276b	122	extern int ptrace_check_attach(struct task_struct *task, bool ignore_state);
4abf9869 NK	123	extern int ptrace_request(struct task_struct *child, long request,
4abf9869 NK	124	unsigned long addr, unsigned long data);
1da177e4 LT	125	extern void ptrace_notify(int exit_code);
	126	extern void __ptrace_link(struct task_struct *child,
	127	struct task_struct *new_parent);
	128	extern void __ptrace_unlink(struct task_struct *child);
39c626ae	129	extern void exit_ptrace(struct task_struct *tracer);
69f594a3 EP	130	#define PTRACE_MODE_READ 0x01
	131	#define PTRACE_MODE_ATTACH 0x02
	132	#define PTRACE_MODE_NOAUDIT 0x04
006ebb40 SS	133	/* Returns 0 on success, -errno on denial. */
	134	extern int __ptrace_may_access(struct task_struct *task, unsigned int mode);
	135	/* Returns true on success, false on denial. */
	136	extern bool ptrace_may_access(struct task_struct *task, unsigned int mode);
1da177e4	137
53b6f9fb ON	138	static inline int ptrace_reparented(struct task_struct *child)
53b6f9fb ON	139	{
0347e177	140	return !same_thread_group(child->real_parent, child->parent);
53b6f9fb	141	}
c6a47cc2	142
1da177e4 LT	143	static inline void ptrace_unlink(struct task_struct *child)
	144	{
	145	if (unlikely(child->ptrace))
	146	__ptrace_unlink(child);
	147	}
	148
4abf9869 NK	149	int generic_ptrace_peekdata(struct task_struct *tsk, unsigned long addr,
	150	unsigned long data);
	151	int generic_ptrace_pokedata(struct task_struct *tsk, unsigned long addr,
	152	unsigned long data);
1da177e4	153
06d98473 TH	154	/**
	155	* ptrace_parent - return the task that is tracing the given task
	156	* @task: task to consider
	157	*
	158	* Returns %NULL if no one is tracing @task, or the &struct task_struct
	159	* pointer to its tracer.
	160	*
	161	* Must called under rcu_read_lock(). The pointer returned might be kept
	162	* live only by RCU. During exec, this may be called with task_lock() held
	163	* on @task, still held from when check_unsafe_exec() was called.
	164	*/
	165	static inline struct task_struct ptrace_parent(struct task_struct task)
	166	{
	167	if (unlikely(task->ptrace))
	168	return rcu_dereference(task->parent);
	169	return NULL;
	170	}
	171
643ad838 TH	172	/**
	173	* ptrace_event_enabled - test whether a ptrace event is enabled
	174	* @task: ptracee of interest
	175	* @event: %PTRACE_EVENT_* to test
	176	*
	177	* Test whether @event is enabled for ptracee @task.
	178	*
	179	* Returns %true if @event is enabled, %false otherwise.
	180	*/
	181	static inline bool ptrace_event_enabled(struct task_struct *task, int event)
	182	{
	183	return task->ptrace & PT_EVENT_FLAG(event);
	184	}
	185
88ac2921 RM	186	/**
88ac2921 RM	187	* ptrace_event - possibly stop for a ptrace event notification
643ad838	188	* @event: %PTRACE_EVENT_* value to report
88ac2921 RM	189	* @message: value for %PTRACE_GETEVENTMSG to return
88ac2921 RM	190	*
643ad838 TH	191	* Check whether @event is enabled and, if so, report @event and @message
643ad838 TH	192	* to the ptrace parent.
88ac2921	193	*
88ac2921 RM	194	* Called without locks.
88ac2921 RM	195	*/
f3c04b93	196	static inline void ptrace_event(int event, unsigned long message)
88ac2921	197	{
f3c04b93 TH	198	if (unlikely(ptrace_event_enabled(current, event))) {
	199	current->ptrace_message = message;
	200	ptrace_notify((event << 8) \| SIGTRAP);
b1845ff5	201	} else if (event == PTRACE_EVENT_EXEC) {
f3c04b93	202	/* legacy EXEC report via SIGTRAP */
b1845ff5 ON	203	if ((current->ptrace & (PT_PTRACED\|PT_SEIZED)) == PT_PTRACED)
b1845ff5 ON	204	send_sig(SIGTRAP, current, 0);
f3c04b93	205	}
88ac2921 RM	206	}
88ac2921 RM	207
09a05394 RM	208	/**
	209	* ptrace_init_task - initialize ptrace state for a new child
	210	* @child: new child task
	211	* @ptrace: true if child should be ptrace'd by parent's tracer
	212	*
	213	* This is called immediately after adding @child to its parent's children
	214	* list. @ptrace is false in the normal case, and true to ptrace @child.
	215	*
	216	* Called with current's siglock and write_lock_irq(&tasklist_lock) held.
	217	*/
	218	static inline void ptrace_init_task(struct task_struct *child, bool ptrace)
	219	{
	220	INIT_LIST_HEAD(&child->ptrace_entry);
	221	INIT_LIST_HEAD(&child->ptraced);
6634ae10 ON	222	#ifdef CONFIG_HAVE_HW_BREAKPOINT
	223	atomic_set(&child->ptrace_bp_refcnt, 1);
	224	#endif
	225	child->jobctl = 0;
09a05394	226	child->ptrace = 0;
6634ae10 ON	227	child->parent = child->real_parent;
	228
	229	if (unlikely(ptrace) && current->ptrace) {
09a05394	230	child->ptrace = current->ptrace;
c6a47cc2	231	__ptrace_link(child, current->parent);
dcace06c	232
d184d6eb ON	233	if (child->ptrace & PT_SEIZED)
	234	task_set_jobctl_pending(child, JOBCTL_TRAP_STOP);
	235	else
	236	sigaddset(&child->pending.signal, SIGSTOP);
	237
dcace06c	238	set_tsk_thread_flag(child, TIF_SIGPENDING);
09a05394 RM	239	}
	240	}
	241
dae33574 RM	242	/**
	243	* ptrace_release_task - final ptrace-related cleanup of a zombie being reaped
	244	* @task: task in %EXIT_DEAD state
	245	*
	246	* Called with write_lock(&tasklist_lock) held.
	247	*/
	248	static inline void ptrace_release_task(struct task_struct *task)
	249	{
	250	BUG_ON(!list_empty(&task->ptraced));
	251	ptrace_unlink(task);
	252	BUG_ON(!list_empty(&task->ptrace_entry));
	253	}
	254
1da177e4 LT	255	#ifndef force_successful_syscall_return
	256	/*
	257	* System call handlers that, upon successful completion, need to return a
	258	* negative value should call force_successful_syscall_return() right before
	259	* returning. On architectures where the syscall convention provides for a
	260	* separate error flag (e.g., alpha, ia64, ppc{,64}, sparc{,64}, possibly
	261	* others), this macro can be used to ensure that the error flag will not get
	262	* set. On architectures which do not support a separate error flag, the macro
	263	* is a no-op and the spurious error condition needs to be filtered out by some
	264	* other means (e.g., in user-level, by passing an extra argument to the
	265	* syscall handler, or something along those lines).
	266	*/
	267	#define force_successful_syscall_return() do { } while (0)
	268	#endif
	269
d7e7528b EP	270	#ifndef is_syscall_success
	271	/*
	272	* On most systems we can tell if a syscall is a success based on if the retval
	273	* is an error value. On some systems like ia64 and powerpc they have different
	274	* indicators of success/failure and must define their own.
	275	*/
	276	#define is_syscall_success(regs) (!IS_ERR_VALUE((unsigned long)(regs_return_value(regs))))
	277	#endif
	278
fb7fa8f1 RM	279	/*
	280	* <asm/ptrace.h> should define the following things inside #ifdef __KERNEL__.
	281	*
	282	* These do-nothing inlines are used when the arch does not
	283	* implement single-step. The kerneldoc comments are here
	284	* to document the interface for all arch definitions.
	285	*/
	286
	287	#ifndef arch_has_single_step
	288	/**
	289	* arch_has_single_step - does this CPU support user-mode single-step?
	290	*
	291	* If this is defined, then there must be function declarations or
	292	* inlines for user_enable_single_step() and user_disable_single_step().
	293	* arch_has_single_step() should evaluate to nonzero iff the machine
	294	* supports instruction single-step for user mode.
	295	* It can be a constant or it can test a CPU feature bit.
	296	*/
	297	#define arch_has_single_step() (0)
	298
	299	/**
	300	* user_enable_single_step - single-step in user-mode task
	301	* @task: either current or a task stopped in %TASK_TRACED
	302	*
	303	* This can only be called when arch_has_single_step() has returned nonzero.
	304	* Set @task so that when it returns to user mode, it will trap after the
dc802c2d RM	305	* next single instruction executes. If arch_has_block_step() is defined,
dc802c2d RM	306	* this must clear the effects of user_enable_block_step() too.
fb7fa8f1 RM	307	*/
	308	static inline void user_enable_single_step(struct task_struct *task)
	309	{
	310	BUG(); /* This can never be called. */
	311	}
	312
	313	/**
	314	* user_disable_single_step - cancel user-mode single-step
	315	* @task: either current or a task stopped in %TASK_TRACED
	316	*
dc802c2d RM	317	* Clear @task of the effects of user_enable_single_step() and
	318	* user_enable_block_step(). This can be called whether or not either
	319	* of those was ever called on @task, and even if arch_has_single_step()
	320	* returned zero.
fb7fa8f1 RM	321	*/
	322	static inline void user_disable_single_step(struct task_struct *task)
	323	{
	324	}
dacbe41f CH	325	#else
	326	extern void user_enable_single_step(struct task_struct *);
	327	extern void user_disable_single_step(struct task_struct *);
fb7fa8f1 RM	328	#endif /* arch_has_single_step */
fb7fa8f1 RM	329
dc802c2d RM	330	#ifndef arch_has_block_step
	331	/**
	332	* arch_has_block_step - does this CPU support user-mode block-step?
	333	*
	334	* If this is defined, then there must be a function declaration or inline
	335	* for user_enable_block_step(), and arch_has_single_step() must be defined
	336	* too. arch_has_block_step() should evaluate to nonzero iff the machine
	337	* supports step-until-branch for user mode. It can be a constant or it
	338	* can test a CPU feature bit.
	339	*/
5b88abbf	340	#define arch_has_block_step() (0)
dc802c2d RM	341
	342	/**
	343	* user_enable_block_step - step until branch in user-mode task
	344	* @task: either current or a task stopped in %TASK_TRACED
	345	*
	346	* This can only be called when arch_has_block_step() has returned nonzero,
	347	* and will never be called when single-instruction stepping is being used.
	348	* Set @task so that when it returns to user mode, it will trap after the
	349	* next branch or trap taken.
	350	*/
	351	static inline void user_enable_block_step(struct task_struct *task)
	352	{
	353	BUG(); /* This can never be called. */
	354	}
dacbe41f CH	355	#else
dacbe41f CH	356	extern void user_enable_block_step(struct task_struct *);
dc802c2d RM	357	#endif /* arch_has_block_step */
dc802c2d RM	358
85ec7fd9 ON	359	#ifdef ARCH_HAS_USER_SINGLE_STEP_INFO
	360	extern void user_single_step_siginfo(struct task_struct *tsk,
	361	struct pt_regs regs, siginfo_t info);
	362	#else
	363	static inline void user_single_step_siginfo(struct task_struct *tsk,
	364	struct pt_regs regs, siginfo_t info)
	365	{
	366	memset(info, 0, sizeof(*info));
	367	info->si_signo = SIGTRAP;
	368	}
	369	#endif
	370
1a669c2f RM	371	#ifndef arch_ptrace_stop_needed
	372	/**
	373	* arch_ptrace_stop_needed - Decide whether arch_ptrace_stop() should be called
	374	* @code: current->exit_code value ptrace will stop with
	375	* @info: siginfo_t pointer (or %NULL) for signal ptrace will stop with
	376	*
	377	* This is called with the siglock held, to decide whether or not it's
	378	* necessary to release the siglock and call arch_ptrace_stop() with the
	379	* same @code and @info arguments. It can be defined to a constant if
	380	* arch_ptrace_stop() is never required, or always is. On machines where
	381	* this makes sense, it should be defined to a quick test to optimize out
	382	* calling arch_ptrace_stop() when it would be superfluous. For example,
	383	* if the thread has not been back to user mode since the last stop, the
	384	* thread state might indicate that nothing needs to be done.
	385	*/
	386	#define arch_ptrace_stop_needed(code, info) (0)
	387	#endif
	388
	389	#ifndef arch_ptrace_stop
	390	/**
	391	* arch_ptrace_stop - Do machine-specific work before stopping for ptrace
	392	* @code: current->exit_code value ptrace will stop with
	393	* @info: siginfo_t pointer (or %NULL) for signal ptrace will stop with
	394	*
	395	* This is called with no locks held when arch_ptrace_stop_needed() has
	396	* just returned nonzero. It is allowed to block, e.g. for user memory
	397	* access. The arch can have machine-specific work to be done before
	398	* ptrace stops. On ia64, register backing store gets written back to user
	399	* memory here. Since this can be costly (requires dropping the siglock),
	400	* we only do it when the arch requires it for this particular stop, as
	401	* indicated by arch_ptrace_stop_needed().
	402	*/
	403	#define arch_ptrace_stop(code, info) do { } while (0)
	404	#endif
	405
bbc69863 RM	406	extern int task_current_syscall(struct task_struct target, long callno,
	407	unsigned long args[6], unsigned int maxargs,
	408	unsigned long sp, unsigned long pc);
	409
bf26c018 FW	410	#ifdef CONFIG_HAVE_HW_BREAKPOINT
	411	extern int ptrace_get_breakpoints(struct task_struct *tsk);
	412	extern void ptrace_put_breakpoints(struct task_struct *tsk);
	413	#else
	414	static inline void ptrace_put_breakpoints(struct task_struct *tsk) { }
	415	#endif /* CONFIG_HAVE_HW_BREAKPOINT */
	416
	417	#endif /* __KERNEL */
1da177e4 LT	418
1da177e4 LT	419	#endif