[linux.git] / drivers / remoteproc / qcom_pil_info.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright (c) 2019-2020 Linaro Ltd.
 */
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of_address.h>
#include "qcom_pil_info.h"

/*
 * The PIL relocation information region is used to communicate memory regions
 * occupied by co-processor firmware for post mortem crash analysis.
 *
 * It consists of an array of entries with an 8 byte textual identifier of the
 * region followed by a 64 bit base address and 32 bit size, both little
 * endian.
 */
#define PIL_RELOC_NAME_LEN	8
#define PIL_RELOC_ENTRY_SIZE	(PIL_RELOC_NAME_LEN + sizeof(__le64) + sizeof(__le32))

struct pil_reloc {
	void __iomem *base;
	size_t num_entries;
};

static struct pil_reloc _reloc __read_mostly;
static DEFINE_MUTEX(pil_reloc_lock);

static int qcom_pil_info_init(void)
{
	struct device_node *np;
	struct resource imem;
	void __iomem *base;
	int ret;

	/* Already initialized? */
	if (_reloc.base)
		return 0;

	np = of_find_compatible_node(NULL, NULL, "qcom,pil-reloc-info");
	if (!np)
		return -ENOENT;

	ret = of_address_to_resource(np, 0, &imem);
	of_node_put(np);
	if (ret < 0)
		return ret;

	base = ioremap(imem.start, resource_size(&imem));
	if (!base) {
		pr_err("failed to map PIL relocation info region\n");
		return -ENOMEM;
	}

	memset_io(base, 0, resource_size(&imem));

	_reloc.base = base;
	_reloc.num_entries = (u32)resource_size(&imem) / PIL_RELOC_ENTRY_SIZE;

	return 0;
}

/**
 * qcom_pil_info_store() - store PIL information of image in IMEM
 * @image:	name of the image
 * @base:	base address of the loaded image
 * @size:	size of the loaded image
 *
 * Return: 0 on success, negative errno on failure
 */
int qcom_pil_info_store(const char *image, phys_addr_t base, size_t size)
{
	char buf[PIL_RELOC_NAME_LEN];
	void __iomem *entry;
	int ret;
	int i;

	mutex_lock(&pil_reloc_lock);
	ret = qcom_pil_info_init();
	if (ret < 0) {
		mutex_unlock(&pil_reloc_lock);
		return ret;
	}

	for (i = 0; i < _reloc.num_entries; i++) {
		entry = _reloc.base + i * PIL_RELOC_ENTRY_SIZE;

		memcpy_fromio(buf, entry, PIL_RELOC_NAME_LEN);

		/*
		 * An empty record means we didn't find it, given that the
		 * records are packed.
		 */
		if (!buf[0])
			goto found_unused;

		if (!strncmp(buf, image, PIL_RELOC_NAME_LEN))
			goto found_existing;
	}

	pr_warn("insufficient PIL info slots\n");
	mutex_unlock(&pil_reloc_lock);
	return -ENOMEM;

found_unused:
	memcpy_toio(entry, image, strnlen(image, PIL_RELOC_NAME_LEN));
found_existing:
	/* Use two writel() as base is only aligned to 4 bytes on odd entries */
	writel(base, entry + PIL_RELOC_NAME_LEN);
	writel((u64)base >> 32, entry + PIL_RELOC_NAME_LEN + 4);
	writel(size, entry + PIL_RELOC_NAME_LEN + sizeof(__le64));
	mutex_unlock(&pil_reloc_lock);

	return 0;
}
EXPORT_SYMBOL_GPL(qcom_pil_info_store);

static void __exit pil_reloc_exit(void)
{
	mutex_lock(&pil_reloc_lock);
	iounmap(_reloc.base);
	_reloc.base = NULL;
	mutex_unlock(&pil_reloc_lock);
}
module_exit(pil_reloc_exit);

MODULE_DESCRIPTION("Qualcomm PIL relocation info");
MODULE_LICENSE("GPL v2");
Commit	Line	Data
549b67da BA	1	// SPDX-License-Identifier: GPL-2.0-only
	2	/*
	3	* Copyright (c) 2019-2020 Linaro Ltd.
	4	*/
	5	#include <linux/kernel.h>
	6	#include <linux/module.h>
	7	#include <linux/mutex.h>
	8	#include <linux/of_address.h>
	9	#include "qcom_pil_info.h"
	10
	11	/*
	12	* The PIL relocation information region is used to communicate memory regions
	13	* occupied by co-processor firmware for post mortem crash analysis.
	14	*
	15	* It consists of an array of entries with an 8 byte textual identifier of the
	16	* region followed by a 64 bit base address and 32 bit size, both little
	17	* endian.
	18	*/
	19	#define PIL_RELOC_NAME_LEN 8
	20	#define PIL_RELOC_ENTRY_SIZE (PIL_RELOC_NAME_LEN + sizeof(__le64) + sizeof(__le32))
	21
	22	struct pil_reloc {
	23	void __iomem *base;
	24	size_t num_entries;
	25	};
	26
	27	static struct pil_reloc _reloc __read_mostly;
	28	static DEFINE_MUTEX(pil_reloc_lock);
	29
	30	static int qcom_pil_info_init(void)
	31	{
	32	struct device_node *np;
	33	struct resource imem;
	34	void __iomem *base;
	35	int ret;
	36
	37	/* Already initialized? */
	38	if (_reloc.base)
	39	return 0;
	40
	41	np = of_find_compatible_node(NULL, NULL, "qcom,pil-reloc-info");
	42	if (!np)
	43	return -ENOENT;
	44
	45	ret = of_address_to_resource(np, 0, &imem);
	46	of_node_put(np);
	47	if (ret < 0)
	48	return ret;
	49
	50	base = ioremap(imem.start, resource_size(&imem));
	51	if (!base) {
	52	pr_err("failed to map PIL relocation info region\n");
	53	return -ENOMEM;
	54	}
	55
	56	memset_io(base, 0, resource_size(&imem));
	57
	58	_reloc.base = base;
7029e783	59	_reloc.num_entries = (u32)resource_size(&imem) / PIL_RELOC_ENTRY_SIZE;
549b67da BA	60
	61	return 0;
	62	}
	63
	64	/**
	65	* qcom_pil_info_store() - store PIL information of image in IMEM
	66	* @image: name of the image
	67	* @base: base address of the loaded image
	68	* @size: size of the loaded image
	69	*
	70	* Return: 0 on success, negative errno on failure
	71	*/
	72	int qcom_pil_info_store(const char *image, phys_addr_t base, size_t size)
	73	{
	74	char buf[PIL_RELOC_NAME_LEN];
	75	void __iomem *entry;
	76	int ret;
	77	int i;
	78
	79	mutex_lock(&pil_reloc_lock);
	80	ret = qcom_pil_info_init();
	81	if (ret < 0) {
	82	mutex_unlock(&pil_reloc_lock);
	83	return ret;
	84	}
	85
	86	for (i = 0; i < _reloc.num_entries; i++) {
	87	entry = _reloc.base + i * PIL_RELOC_ENTRY_SIZE;
	88
	89	memcpy_fromio(buf, entry, PIL_RELOC_NAME_LEN);
	90
	91	/*
	92	* An empty record means we didn't find it, given that the
	93	* records are packed.
	94	*/
	95	if (!buf[0])
	96	goto found_unused;
	97
	98	if (!strncmp(buf, image, PIL_RELOC_NAME_LEN))
	99	goto found_existing;
	100	}
	101
	102	pr_warn("insufficient PIL info slots\n");
	103	mutex_unlock(&pil_reloc_lock);
	104	return -ENOMEM;
	105
	106	found_unused:
fdc12231	107	memcpy_toio(entry, image, strnlen(image, PIL_RELOC_NAME_LEN));
549b67da BA	108	found_existing:
	109	/* Use two writel() as base is only aligned to 4 bytes on odd entries */
	110	writel(base, entry + PIL_RELOC_NAME_LEN);
90ec257c	111	writel((u64)base >> 32, entry + PIL_RELOC_NAME_LEN + 4);
549b67da BA	112	writel(size, entry + PIL_RELOC_NAME_LEN + sizeof(__le64));
	113	mutex_unlock(&pil_reloc_lock);
	114
	115	return 0;
	116	}
	117	EXPORT_SYMBOL_GPL(qcom_pil_info_store);
	118
	119	static void __exit pil_reloc_exit(void)
	120	{
	121	mutex_lock(&pil_reloc_lock);
	122	iounmap(_reloc.base);
	123	_reloc.base = NULL;
	124	mutex_unlock(&pil_reloc_lock);
	125	}
	126	module_exit(pil_reloc_exit);
	127
	128	MODULE_DESCRIPTION("Qualcomm PIL relocation info");
	129	MODULE_LICENSE("GPL v2");