]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* sun3lance.c: Ethernet driver for SUN3 Lance chip */ |
2 | /* | |
3 | ||
6aa20a22 | 4 | Sun3 Lance ethernet driver, by Sam Creasey ([email protected]). |
1da177e4 LT |
5 | This driver is a part of the linux kernel, and is thus distributed |
6 | under the GNU General Public License. | |
6aa20a22 | 7 | |
1da177e4 LT |
8 | The values used in LANCE_OBIO and LANCE_IRQ seem to be empirically |
9 | true for the correct IRQ and address of the lance registers. They | |
10 | have not been widely tested, however. What we probably need is a | |
11 | "proper" way to search for a device in the sun3's prom, but, alas, | |
6aa20a22 | 12 | linux has no such thing. |
1da177e4 LT |
13 | |
14 | This driver is largely based on atarilance.c, by Roman Hodek. Other | |
15 | sources of inspiration were the NetBSD sun3 am7990 driver, and the | |
6aa20a22 | 16 | linux sparc lance driver (sunlance.c). |
1da177e4 LT |
17 | |
18 | There are more assumptions made throughout this driver, it almost | |
19 | certainly still needs work, but it does work at least for RARP/BOOTP and | |
20 | mounting the root NFS filesystem. | |
6aa20a22 | 21 | |
1da177e4 LT |
22 | */ |
23 | ||
24 | static char *version = "sun3lance.c: v1.2 1/12/2001 Sam Creasey ([email protected])\n"; | |
25 | ||
26 | #include <linux/module.h> | |
27 | #include <linux/stddef.h> | |
28 | #include <linux/kernel.h> | |
29 | #include <linux/string.h> | |
30 | #include <linux/errno.h> | |
31 | #include <linux/slab.h> | |
32 | #include <linux/interrupt.h> | |
33 | #include <linux/init.h> | |
34 | #include <linux/ioport.h> | |
35 | #include <linux/delay.h> | |
36 | #include <linux/netdevice.h> | |
37 | #include <linux/etherdevice.h> | |
38 | #include <linux/skbuff.h> | |
39 | #include <linux/bitops.h> | |
40 | ||
a1f8e7f7 | 41 | #include <asm/cacheflush.h> |
1da177e4 LT |
42 | #include <asm/setup.h> |
43 | #include <asm/irq.h> | |
44 | #include <asm/io.h> | |
45 | #include <asm/pgtable.h> | |
46 | #include <asm/dvma.h> | |
47 | #include <asm/idprom.h> | |
48 | #include <asm/machines.h> | |
49 | ||
50 | #ifdef CONFIG_SUN3 | |
51 | #include <asm/sun3mmu.h> | |
52 | #else | |
53 | #include <asm/sun3xprom.h> | |
54 | #endif | |
55 | ||
56 | /* sun3/60 addr/irq for the lance chip. If your sun is different, | |
57 | change this. */ | |
58 | #define LANCE_OBIO 0x120000 | |
4facfde9 | 59 | #define LANCE_IRQ IRQ_AUTO_3 |
1da177e4 LT |
60 | |
61 | /* Debug level: | |
62 | * 0 = silent, print only serious errors | |
63 | * 1 = normal, print error messages | |
64 | * 2 = debug, print debug infos | |
65 | * 3 = debug, print even more debug infos (packet data) | |
66 | */ | |
67 | ||
68 | #define LANCE_DEBUG 0 | |
69 | ||
70 | #ifdef LANCE_DEBUG | |
71 | static int lance_debug = LANCE_DEBUG; | |
72 | #else | |
73 | static int lance_debug = 1; | |
74 | #endif | |
8d3b33f6 | 75 | module_param(lance_debug, int, 0); |
1da177e4 LT |
76 | MODULE_PARM_DESC(lance_debug, "SUN3 Lance debug level (0-3)"); |
77 | MODULE_LICENSE("GPL"); | |
78 | ||
79 | #define DPRINTK(n,a) \ | |
80 | do { \ | |
81 | if (lance_debug >= n) \ | |
82 | printk a; \ | |
83 | } while( 0 ) | |
84 | ||
85 | ||
86 | /* we're only using 32k of memory, so we use 4 TX | |
87 | buffers and 16 RX buffers. These values are expressed as log2. */ | |
88 | ||
89 | #define TX_LOG_RING_SIZE 3 | |
90 | #define RX_LOG_RING_SIZE 5 | |
91 | ||
92 | /* These are the derived values */ | |
93 | ||
94 | #define TX_RING_SIZE (1 << TX_LOG_RING_SIZE) | |
95 | #define TX_RING_LEN_BITS (TX_LOG_RING_SIZE << 5) | |
96 | #define TX_RING_MOD_MASK (TX_RING_SIZE - 1) | |
97 | ||
98 | #define RX_RING_SIZE (1 << RX_LOG_RING_SIZE) | |
99 | #define RX_RING_LEN_BITS (RX_LOG_RING_SIZE << 5) | |
100 | #define RX_RING_MOD_MASK (RX_RING_SIZE - 1) | |
101 | ||
102 | /* Definitions for packet buffer access: */ | |
103 | #define PKT_BUF_SZ 1544 | |
104 | ||
105 | /* Get the address of a packet buffer corresponding to a given buffer head */ | |
106 | #define PKTBUF_ADDR(head) (void *)((unsigned long)(MEM) | (head)->base) | |
107 | ||
108 | ||
109 | /* The LANCE Rx and Tx ring descriptors. */ | |
110 | struct lance_rx_head { | |
111 | unsigned short base; /* Low word of base addr */ | |
112 | volatile unsigned char flag; | |
113 | unsigned char base_hi; /* High word of base addr (unused) */ | |
114 | short buf_length; /* This length is 2s complement! */ | |
115 | volatile short msg_length; /* This length is "normal". */ | |
116 | }; | |
117 | ||
118 | struct lance_tx_head { | |
119 | unsigned short base; /* Low word of base addr */ | |
120 | volatile unsigned char flag; | |
121 | unsigned char base_hi; /* High word of base addr (unused) */ | |
122 | short length; /* Length is 2s complement! */ | |
123 | volatile short misc; | |
124 | }; | |
125 | ||
126 | /* The LANCE initialization block, described in databook. */ | |
127 | struct lance_init_block { | |
128 | unsigned short mode; /* Pre-set mode */ | |
129 | unsigned char hwaddr[6]; /* Physical ethernet address */ | |
130 | unsigned int filter[2]; /* Multicast filter (unused). */ | |
131 | /* Receive and transmit ring base, along with length bits. */ | |
132 | unsigned short rdra; | |
133 | unsigned short rlen; | |
134 | unsigned short tdra; | |
135 | unsigned short tlen; | |
136 | unsigned short pad[4]; /* is thie needed? */ | |
137 | }; | |
138 | ||
139 | /* The whole layout of the Lance shared memory */ | |
140 | struct lance_memory { | |
141 | struct lance_init_block init; | |
142 | struct lance_tx_head tx_head[TX_RING_SIZE]; | |
143 | struct lance_rx_head rx_head[RX_RING_SIZE]; | |
144 | char rx_data[RX_RING_SIZE][PKT_BUF_SZ]; | |
145 | char tx_data[TX_RING_SIZE][PKT_BUF_SZ]; | |
146 | }; | |
147 | ||
148 | /* The driver's private device structure */ | |
149 | ||
150 | struct lance_private { | |
151 | volatile unsigned short *iobase; | |
152 | struct lance_memory *mem; | |
153 | int new_rx, new_tx; /* The next free ring entry */ | |
154 | int old_tx, old_rx; /* ring entry to be processed */ | |
1da177e4 LT |
155 | /* These two must be longs for set_bit() */ |
156 | long tx_full; | |
157 | long lock; | |
158 | }; | |
159 | ||
160 | /* I/O register access macros */ | |
161 | ||
162 | #define MEM lp->mem | |
163 | #define DREG lp->iobase[0] | |
164 | #define AREG lp->iobase[1] | |
e345d5ef | 165 | #define REGA(a) (*( AREG = (a), &DREG )) |
1da177e4 LT |
166 | |
167 | /* Definitions for the Lance */ | |
168 | ||
169 | /* tx_head flags */ | |
170 | #define TMD1_ENP 0x01 /* end of packet */ | |
171 | #define TMD1_STP 0x02 /* start of packet */ | |
172 | #define TMD1_DEF 0x04 /* deferred */ | |
173 | #define TMD1_ONE 0x08 /* one retry needed */ | |
174 | #define TMD1_MORE 0x10 /* more than one retry needed */ | |
175 | #define TMD1_ERR 0x40 /* error summary */ | |
176 | #define TMD1_OWN 0x80 /* ownership (set: chip owns) */ | |
177 | ||
178 | #define TMD1_OWN_CHIP TMD1_OWN | |
179 | #define TMD1_OWN_HOST 0 | |
180 | ||
181 | /* tx_head misc field */ | |
182 | #define TMD3_TDR 0x03FF /* Time Domain Reflectometry counter */ | |
183 | #define TMD3_RTRY 0x0400 /* failed after 16 retries */ | |
184 | #define TMD3_LCAR 0x0800 /* carrier lost */ | |
185 | #define TMD3_LCOL 0x1000 /* late collision */ | |
186 | #define TMD3_UFLO 0x4000 /* underflow (late memory) */ | |
187 | #define TMD3_BUFF 0x8000 /* buffering error (no ENP) */ | |
188 | ||
189 | /* rx_head flags */ | |
190 | #define RMD1_ENP 0x01 /* end of packet */ | |
191 | #define RMD1_STP 0x02 /* start of packet */ | |
192 | #define RMD1_BUFF 0x04 /* buffer error */ | |
193 | #define RMD1_CRC 0x08 /* CRC error */ | |
194 | #define RMD1_OFLO 0x10 /* overflow */ | |
195 | #define RMD1_FRAM 0x20 /* framing error */ | |
196 | #define RMD1_ERR 0x40 /* error summary */ | |
197 | #define RMD1_OWN 0x80 /* ownership (set: ship owns) */ | |
198 | ||
199 | #define RMD1_OWN_CHIP RMD1_OWN | |
200 | #define RMD1_OWN_HOST 0 | |
201 | ||
202 | /* register names */ | |
203 | #define CSR0 0 /* mode/status */ | |
204 | #define CSR1 1 /* init block addr (low) */ | |
205 | #define CSR2 2 /* init block addr (high) */ | |
206 | #define CSR3 3 /* misc */ | |
207 | #define CSR8 8 /* address filter */ | |
208 | #define CSR15 15 /* promiscuous mode */ | |
209 | ||
210 | /* CSR0 */ | |
211 | /* (R=readable, W=writeable, S=set on write, C=clear on write) */ | |
212 | #define CSR0_INIT 0x0001 /* initialize (RS) */ | |
213 | #define CSR0_STRT 0x0002 /* start (RS) */ | |
214 | #define CSR0_STOP 0x0004 /* stop (RS) */ | |
215 | #define CSR0_TDMD 0x0008 /* transmit demand (RS) */ | |
216 | #define CSR0_TXON 0x0010 /* transmitter on (R) */ | |
217 | #define CSR0_RXON 0x0020 /* receiver on (R) */ | |
218 | #define CSR0_INEA 0x0040 /* interrupt enable (RW) */ | |
219 | #define CSR0_INTR 0x0080 /* interrupt active (R) */ | |
220 | #define CSR0_IDON 0x0100 /* initialization done (RC) */ | |
221 | #define CSR0_TINT 0x0200 /* transmitter interrupt (RC) */ | |
222 | #define CSR0_RINT 0x0400 /* receiver interrupt (RC) */ | |
223 | #define CSR0_MERR 0x0800 /* memory error (RC) */ | |
224 | #define CSR0_MISS 0x1000 /* missed frame (RC) */ | |
225 | #define CSR0_CERR 0x2000 /* carrier error (no heartbeat :-) (RC) */ | |
226 | #define CSR0_BABL 0x4000 /* babble: tx-ed too many bits (RC) */ | |
227 | #define CSR0_ERR 0x8000 /* error (RC) */ | |
228 | ||
229 | /* CSR3 */ | |
230 | #define CSR3_BCON 0x0001 /* byte control */ | |
231 | #define CSR3_ACON 0x0002 /* ALE control */ | |
232 | #define CSR3_BSWP 0x0004 /* byte swap (1=big endian) */ | |
233 | ||
234 | /***************************** Prototypes *****************************/ | |
235 | ||
236 | static int lance_probe( struct net_device *dev); | |
237 | static int lance_open( struct net_device *dev ); | |
238 | static void lance_init_ring( struct net_device *dev ); | |
239 | static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev ); | |
7d12e780 | 240 | static irqreturn_t lance_interrupt( int irq, void *dev_id); |
1da177e4 LT |
241 | static int lance_rx( struct net_device *dev ); |
242 | static int lance_close( struct net_device *dev ); | |
1da177e4 LT |
243 | static void set_multicast_list( struct net_device *dev ); |
244 | ||
245 | /************************* End of Prototypes **************************/ | |
246 | ||
247 | struct net_device * __init sun3lance_probe(int unit) | |
248 | { | |
249 | struct net_device *dev; | |
250 | static int found; | |
251 | int err = -ENODEV; | |
252 | ||
0f734484 GU |
253 | if (!MACH_IS_SUN3 && !MACH_IS_SUN3X) |
254 | return ERR_PTR(-ENODEV); | |
255 | ||
1da177e4 LT |
256 | /* check that this machine has an onboard lance */ |
257 | switch(idprom->id_machtype) { | |
258 | case SM_SUN3|SM_3_50: | |
259 | case SM_SUN3|SM_3_60: | |
260 | case SM_SUN3X|SM_3_80: | |
261 | /* these machines have lance */ | |
262 | break; | |
263 | ||
264 | default: | |
265 | return ERR_PTR(-ENODEV); | |
266 | } | |
267 | ||
268 | if (found) | |
269 | return ERR_PTR(-ENODEV); | |
270 | ||
271 | dev = alloc_etherdev(sizeof(struct lance_private)); | |
272 | if (!dev) | |
273 | return ERR_PTR(-ENOMEM); | |
274 | if (unit >= 0) { | |
275 | sprintf(dev->name, "eth%d", unit); | |
276 | netdev_boot_setup_check(dev); | |
277 | } | |
1da177e4 LT |
278 | |
279 | if (!lance_probe(dev)) | |
280 | goto out; | |
281 | ||
282 | err = register_netdev(dev); | |
283 | if (err) | |
284 | goto out1; | |
285 | found = 1; | |
286 | return dev; | |
287 | ||
288 | out1: | |
289 | #ifdef CONFIG_SUN3 | |
437111ca | 290 | iounmap((void __iomem *)dev->base_addr); |
1da177e4 LT |
291 | #endif |
292 | out: | |
293 | free_netdev(dev); | |
294 | return ERR_PTR(err); | |
295 | } | |
296 | ||
2160187a AB |
297 | static const struct net_device_ops lance_netdev_ops = { |
298 | .ndo_open = lance_open, | |
299 | .ndo_stop = lance_close, | |
300 | .ndo_start_xmit = lance_start_xmit, | |
301 | .ndo_set_multicast_list = set_multicast_list, | |
302 | .ndo_set_mac_address = NULL, | |
303 | .ndo_change_mtu = eth_change_mtu, | |
304 | .ndo_validate_addr = eth_validate_addr, | |
305 | }; | |
306 | ||
1da177e4 | 307 | static int __init lance_probe( struct net_device *dev) |
6aa20a22 | 308 | { |
1da177e4 | 309 | unsigned long ioaddr; |
6aa20a22 | 310 | |
1da177e4 LT |
311 | struct lance_private *lp; |
312 | int i; | |
313 | static int did_version; | |
314 | volatile unsigned short *ioaddr_probe; | |
315 | unsigned short tmp1, tmp2; | |
316 | ||
317 | #ifdef CONFIG_SUN3 | |
318 | ioaddr = (unsigned long)ioremap(LANCE_OBIO, PAGE_SIZE); | |
319 | if (!ioaddr) | |
320 | return 0; | |
321 | #else | |
322 | ioaddr = SUN3X_LANCE; | |
323 | #endif | |
324 | ||
325 | /* test to see if there's really a lance here */ | |
326 | /* (CSRO_INIT shouldn't be readable) */ | |
6aa20a22 | 327 | |
1da177e4 LT |
328 | ioaddr_probe = (volatile unsigned short *)ioaddr; |
329 | tmp1 = ioaddr_probe[0]; | |
330 | tmp2 = ioaddr_probe[1]; | |
331 | ||
332 | ioaddr_probe[1] = CSR0; | |
333 | ioaddr_probe[0] = CSR0_INIT | CSR0_STOP; | |
334 | ||
335 | if(ioaddr_probe[0] != CSR0_STOP) { | |
336 | ioaddr_probe[0] = tmp1; | |
337 | ioaddr_probe[1] = tmp2; | |
338 | ||
339 | #ifdef CONFIG_SUN3 | |
437111ca | 340 | iounmap((void __iomem *)ioaddr); |
1da177e4 LT |
341 | #endif |
342 | return 0; | |
343 | } | |
344 | ||
345 | lp = netdev_priv(dev); | |
346 | ||
347 | /* XXX - leak? */ | |
348 | MEM = dvma_malloc_align(sizeof(struct lance_memory), 0x10000); | |
c14bac62 CG |
349 | if (MEM == NULL) { |
350 | #ifdef CONFIG_SUN3 | |
351 | iounmap((void __iomem *)ioaddr); | |
352 | #endif | |
353 | printk(KERN_WARNING "SUN3 Lance couldn't allocate DVMA memory\n"); | |
354 | return 0; | |
355 | } | |
1da177e4 LT |
356 | |
357 | lp->iobase = (volatile unsigned short *)ioaddr; | |
358 | dev->base_addr = (unsigned long)ioaddr; /* informational only */ | |
359 | ||
6aa20a22 | 360 | REGA(CSR0) = CSR0_STOP; |
1da177e4 | 361 | |
c14bac62 CG |
362 | if (request_irq(LANCE_IRQ, lance_interrupt, IRQF_DISABLED, "SUN3 Lance", dev) < 0) { |
363 | #ifdef CONFIG_SUN3 | |
364 | iounmap((void __iomem *)ioaddr); | |
365 | #endif | |
366 | dvma_free((void *)MEM); | |
367 | printk(KERN_WARNING "SUN3 Lance unable to allocate IRQ\n"); | |
368 | return 0; | |
369 | } | |
1da177e4 LT |
370 | dev->irq = (unsigned short)LANCE_IRQ; |
371 | ||
372 | ||
373 | printk("%s: SUN3 Lance at io %#lx, mem %#lx, irq %d, hwaddr ", | |
374 | dev->name, | |
375 | (unsigned long)ioaddr, | |
376 | (unsigned long)MEM, | |
377 | dev->irq); | |
378 | ||
379 | /* copy in the ethernet address from the prom */ | |
380 | for(i = 0; i < 6 ; i++) | |
381 | dev->dev_addr[i] = idprom->id_ethaddr[i]; | |
382 | ||
383 | /* tell the card it's ether address, bytes swapped */ | |
384 | MEM->init.hwaddr[0] = dev->dev_addr[1]; | |
385 | MEM->init.hwaddr[1] = dev->dev_addr[0]; | |
386 | MEM->init.hwaddr[2] = dev->dev_addr[3]; | |
387 | MEM->init.hwaddr[3] = dev->dev_addr[2]; | |
388 | MEM->init.hwaddr[4] = dev->dev_addr[5]; | |
389 | MEM->init.hwaddr[5] = dev->dev_addr[4]; | |
390 | ||
e174961c | 391 | printk("%pM\n", dev->dev_addr); |
1da177e4 LT |
392 | |
393 | MEM->init.mode = 0x0000; | |
394 | MEM->init.filter[0] = 0x00000000; | |
395 | MEM->init.filter[1] = 0x00000000; | |
396 | MEM->init.rdra = dvma_vtob(MEM->rx_head); | |
397 | MEM->init.rlen = (RX_LOG_RING_SIZE << 13) | | |
398 | (dvma_vtob(MEM->rx_head) >> 16); | |
399 | MEM->init.tdra = dvma_vtob(MEM->tx_head); | |
400 | MEM->init.tlen = (TX_LOG_RING_SIZE << 13) | | |
401 | (dvma_vtob(MEM->tx_head) >> 16); | |
402 | ||
403 | DPRINTK(2, ("initaddr: %08lx rx_ring: %08lx tx_ring: %08lx\n", | |
404 | dvma_vtob(&(MEM->init)), dvma_vtob(MEM->rx_head), | |
6aa20a22 | 405 | (dvma_vtob(MEM->tx_head)))); |
1da177e4 LT |
406 | |
407 | if (did_version++ == 0) | |
408 | printk( version ); | |
409 | ||
2160187a | 410 | dev->netdev_ops = &lance_netdev_ops; |
1da177e4 LT |
411 | // KLUDGE -- REMOVE ME |
412 | set_bit(__LINK_STATE_PRESENT, &dev->state); | |
413 | ||
414 | ||
1da177e4 LT |
415 | return 1; |
416 | } | |
417 | ||
418 | static int lance_open( struct net_device *dev ) | |
419 | { | |
420 | struct lance_private *lp = netdev_priv(dev); | |
421 | int i; | |
422 | ||
423 | DPRINTK( 2, ( "%s: lance_open()\n", dev->name )); | |
424 | ||
425 | REGA(CSR0) = CSR0_STOP; | |
426 | ||
427 | lance_init_ring(dev); | |
428 | ||
429 | /* From now on, AREG is kept to point to CSR0 */ | |
430 | REGA(CSR0) = CSR0_INIT; | |
431 | ||
432 | i = 1000000; | |
433 | while (--i > 0) | |
434 | if (DREG & CSR0_IDON) | |
435 | break; | |
cff71e89 | 436 | if (i <= 0 || (DREG & CSR0_ERR)) { |
1da177e4 LT |
437 | DPRINTK( 2, ( "lance_open(): opening %s failed, i=%d, csr0=%04x\n", |
438 | dev->name, i, DREG )); | |
439 | DREG = CSR0_STOP; | |
440 | return( -EIO ); | |
441 | } | |
442 | ||
443 | DREG = CSR0_IDON | CSR0_STRT | CSR0_INEA; | |
444 | ||
445 | netif_start_queue(dev); | |
6aa20a22 | 446 | |
1da177e4 LT |
447 | DPRINTK( 2, ( "%s: LANCE is open, csr0 %04x\n", dev->name, DREG )); |
448 | ||
449 | return( 0 ); | |
450 | } | |
451 | ||
452 | ||
453 | /* Initialize the LANCE Rx and Tx rings. */ | |
454 | ||
455 | static void lance_init_ring( struct net_device *dev ) | |
456 | { | |
457 | struct lance_private *lp = netdev_priv(dev); | |
458 | int i; | |
459 | ||
460 | lp->lock = 0; | |
461 | lp->tx_full = 0; | |
462 | lp->new_rx = lp->new_tx = 0; | |
463 | lp->old_rx = lp->old_tx = 0; | |
464 | ||
465 | for( i = 0; i < TX_RING_SIZE; i++ ) { | |
466 | MEM->tx_head[i].base = dvma_vtob(MEM->tx_data[i]); | |
467 | MEM->tx_head[i].flag = 0; | |
6aa20a22 | 468 | MEM->tx_head[i].base_hi = |
1da177e4 LT |
469 | (dvma_vtob(MEM->tx_data[i])) >>16; |
470 | MEM->tx_head[i].length = 0; | |
471 | MEM->tx_head[i].misc = 0; | |
472 | } | |
473 | ||
474 | for( i = 0; i < RX_RING_SIZE; i++ ) { | |
475 | MEM->rx_head[i].base = dvma_vtob(MEM->rx_data[i]); | |
476 | MEM->rx_head[i].flag = RMD1_OWN_CHIP; | |
6aa20a22 | 477 | MEM->rx_head[i].base_hi = |
1da177e4 LT |
478 | (dvma_vtob(MEM->rx_data[i])) >> 16; |
479 | MEM->rx_head[i].buf_length = -PKT_BUF_SZ | 0xf000; | |
480 | MEM->rx_head[i].msg_length = 0; | |
481 | } | |
482 | ||
483 | /* tell the card it's ether address, bytes swapped */ | |
484 | MEM->init.hwaddr[0] = dev->dev_addr[1]; | |
485 | MEM->init.hwaddr[1] = dev->dev_addr[0]; | |
486 | MEM->init.hwaddr[2] = dev->dev_addr[3]; | |
487 | MEM->init.hwaddr[3] = dev->dev_addr[2]; | |
488 | MEM->init.hwaddr[4] = dev->dev_addr[5]; | |
489 | MEM->init.hwaddr[5] = dev->dev_addr[4]; | |
490 | ||
491 | MEM->init.mode = 0x0000; | |
492 | MEM->init.filter[0] = 0x00000000; | |
493 | MEM->init.filter[1] = 0x00000000; | |
494 | MEM->init.rdra = dvma_vtob(MEM->rx_head); | |
495 | MEM->init.rlen = (RX_LOG_RING_SIZE << 13) | | |
496 | (dvma_vtob(MEM->rx_head) >> 16); | |
497 | MEM->init.tdra = dvma_vtob(MEM->tx_head); | |
498 | MEM->init.tlen = (TX_LOG_RING_SIZE << 13) | | |
499 | (dvma_vtob(MEM->tx_head) >> 16); | |
500 | ||
501 | ||
502 | /* tell the lance the address of its init block */ | |
503 | REGA(CSR1) = dvma_vtob(&(MEM->init)); | |
504 | REGA(CSR2) = dvma_vtob(&(MEM->init)) >> 16; | |
505 | ||
506 | #ifdef CONFIG_SUN3X | |
507 | REGA(CSR3) = CSR3_BSWP | CSR3_ACON | CSR3_BCON; | |
508 | #else | |
509 | REGA(CSR3) = CSR3_BSWP; | |
510 | #endif | |
511 | ||
512 | } | |
513 | ||
514 | ||
515 | static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev ) | |
516 | { | |
517 | struct lance_private *lp = netdev_priv(dev); | |
518 | int entry, len; | |
519 | struct lance_tx_head *head; | |
520 | unsigned long flags; | |
521 | ||
522 | DPRINTK( 1, ( "%s: transmit start.\n", | |
523 | dev->name)); | |
524 | ||
525 | /* Transmitter timeout, serious problems. */ | |
526 | if (netif_queue_stopped(dev)) { | |
527 | int tickssofar = jiffies - dev->trans_start; | |
528 | if (tickssofar < 20) | |
5b548140 | 529 | return NETDEV_TX_BUSY; |
1da177e4 LT |
530 | |
531 | DPRINTK( 1, ( "%s: transmit timed out, status %04x, resetting.\n", | |
532 | dev->name, DREG )); | |
533 | DREG = CSR0_STOP; | |
534 | /* | |
535 | * Always set BSWP after a STOP as STOP puts it back into | |
536 | * little endian mode. | |
537 | */ | |
538 | REGA(CSR3) = CSR3_BSWP; | |
09f75cd7 | 539 | dev->stats.tx_errors++; |
1da177e4 LT |
540 | |
541 | if(lance_debug >= 2) { | |
542 | int i; | |
543 | printk("Ring data: old_tx %d new_tx %d%s new_rx %d\n", | |
544 | lp->old_tx, lp->new_tx, | |
545 | lp->tx_full ? " (full)" : "", | |
546 | lp->new_rx ); | |
547 | for( i = 0 ; i < RX_RING_SIZE; i++ ) | |
548 | printk( "rx #%d: base=%04x blen=%04x mlen=%04x\n", | |
549 | i, MEM->rx_head[i].base, | |
550 | -MEM->rx_head[i].buf_length, | |
551 | MEM->rx_head[i].msg_length); | |
552 | for( i = 0 ; i < TX_RING_SIZE; i++ ) | |
553 | printk("tx #%d: base=%04x len=%04x misc=%04x\n", | |
554 | i, MEM->tx_head[i].base, | |
555 | -MEM->tx_head[i].length, | |
556 | MEM->tx_head[i].misc ); | |
557 | } | |
558 | ||
559 | lance_init_ring(dev); | |
560 | REGA( CSR0 ) = CSR0_INEA | CSR0_INIT | CSR0_STRT; | |
6aa20a22 | 561 | |
1da177e4 LT |
562 | netif_start_queue(dev); |
563 | dev->trans_start = jiffies; | |
6aa20a22 | 564 | |
6ed10654 | 565 | return NETDEV_TX_OK; |
1da177e4 LT |
566 | } |
567 | ||
6aa20a22 | 568 | |
1da177e4 LT |
569 | /* Block a timer-based transmit from overlapping. This could better be |
570 | done with atomic_swap(1, dev->tbusy), but set_bit() works as well. */ | |
571 | ||
572 | /* Block a timer-based transmit from overlapping with us by | |
573 | stopping the queue for a bit... */ | |
6aa20a22 | 574 | |
1da177e4 | 575 | netif_stop_queue(dev); |
6aa20a22 | 576 | |
1da177e4 LT |
577 | if (test_and_set_bit( 0, (void*)&lp->lock ) != 0) { |
578 | printk( "%s: tx queue lock!.\n", dev->name); | |
579 | /* don't clear dev->tbusy flag. */ | |
5b548140 | 580 | return NETDEV_TX_BUSY; |
1da177e4 LT |
581 | } |
582 | ||
583 | AREG = CSR0; | |
584 | DPRINTK( 2, ( "%s: lance_start_xmit() called, csr0 %4.4x.\n", | |
585 | dev->name, DREG )); | |
586 | ||
587 | #ifdef CONFIG_SUN3X | |
588 | /* this weirdness doesn't appear on sun3... */ | |
589 | if(!(DREG & CSR0_INIT)) { | |
590 | DPRINTK( 1, ("INIT not set, reinitializing...\n")); | |
591 | REGA( CSR0 ) = CSR0_STOP; | |
592 | lance_init_ring(dev); | |
593 | REGA( CSR0 ) = CSR0_INIT | CSR0_STRT; | |
594 | } | |
595 | #endif | |
596 | ||
597 | /* Fill in a Tx ring entry */ | |
598 | #if 0 | |
599 | if (lance_debug >= 2) { | |
0795af57 JP |
600 | printk( "%s: TX pkt %d type 0x%04x" |
601 | " from %s to %s" | |
602 | " data at 0x%08x len %d\n", | |
603 | dev->name, lp->new_tx, ((u_short *)skb->data)[6], | |
604 | DEV_ADDR(&skb->data[6]), DEV_ADDR(skb->data), | |
605 | (int)skb->data, (int)skb->len ); | |
1da177e4 | 606 | } |
6aa20a22 | 607 | #endif |
1da177e4 LT |
608 | /* We're not prepared for the int until the last flags are set/reset. |
609 | * And the int may happen already after setting the OWN_CHIP... */ | |
610 | local_irq_save(flags); | |
611 | ||
612 | /* Mask to ring buffer boundary. */ | |
613 | entry = lp->new_tx; | |
614 | head = &(MEM->tx_head[entry]); | |
615 | ||
616 | /* Caution: the write order is important here, set the "ownership" bits | |
617 | * last. | |
618 | */ | |
619 | ||
620 | /* the sun3's lance needs it's buffer padded to the minimum | |
621 | size */ | |
622 | len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN; | |
623 | ||
624 | // head->length = -len; | |
625 | head->length = (-len) | 0xf000; | |
626 | head->misc = 0; | |
627 | ||
d626f62b | 628 | skb_copy_from_linear_data(skb, PKTBUF_ADDR(head), skb->len); |
1da177e4 LT |
629 | if (len != skb->len) |
630 | memset(PKTBUF_ADDR(head) + skb->len, 0, len-skb->len); | |
631 | ||
632 | head->flag = TMD1_OWN_CHIP | TMD1_ENP | TMD1_STP; | |
633 | lp->new_tx = (lp->new_tx + 1) & TX_RING_MOD_MASK; | |
09f75cd7 | 634 | dev->stats.tx_bytes += skb->len; |
1da177e4 LT |
635 | |
636 | /* Trigger an immediate send poll. */ | |
637 | REGA(CSR0) = CSR0_INEA | CSR0_TDMD | CSR0_STRT; | |
638 | AREG = CSR0; | |
639 | DPRINTK( 2, ( "%s: lance_start_xmit() exiting, csr0 %4.4x.\n", | |
640 | dev->name, DREG )); | |
641 | dev->trans_start = jiffies; | |
642 | dev_kfree_skb( skb ); | |
643 | ||
644 | lp->lock = 0; | |
645 | if ((MEM->tx_head[(entry+1) & TX_RING_MOD_MASK].flag & TMD1_OWN) == | |
6aa20a22 | 646 | TMD1_OWN_HOST) |
1da177e4 LT |
647 | netif_start_queue(dev); |
648 | ||
649 | local_irq_restore(flags); | |
650 | ||
6ed10654 | 651 | return NETDEV_TX_OK; |
1da177e4 LT |
652 | } |
653 | ||
654 | /* The LANCE interrupt handler. */ | |
655 | ||
7d12e780 | 656 | static irqreturn_t lance_interrupt( int irq, void *dev_id) |
1da177e4 LT |
657 | { |
658 | struct net_device *dev = dev_id; | |
659 | struct lance_private *lp = netdev_priv(dev); | |
660 | int csr0; | |
661 | static int in_interrupt; | |
662 | ||
663 | if (dev == NULL) { | |
664 | DPRINTK( 1, ( "lance_interrupt(): invalid dev_id\n" )); | |
665 | return IRQ_NONE; | |
666 | } | |
667 | ||
668 | if (in_interrupt) | |
669 | DPRINTK( 2, ( "%s: Re-entering the interrupt handler.\n", dev->name )); | |
670 | in_interrupt = 1; | |
6aa20a22 | 671 | |
1da177e4 LT |
672 | still_more: |
673 | flush_cache_all(); | |
6aa20a22 | 674 | |
1da177e4 LT |
675 | AREG = CSR0; |
676 | csr0 = DREG; | |
677 | ||
678 | /* ack interrupts */ | |
679 | DREG = csr0 & (CSR0_TINT | CSR0_RINT | CSR0_IDON); | |
680 | ||
681 | /* clear errors */ | |
682 | if(csr0 & CSR0_ERR) | |
683 | DREG = CSR0_BABL | CSR0_MERR | CSR0_CERR | CSR0_MISS; | |
684 | ||
685 | ||
686 | DPRINTK( 2, ( "%s: interrupt csr0=%04x new csr=%04x.\n", | |
687 | dev->name, csr0, DREG )); | |
688 | ||
689 | if (csr0 & CSR0_TINT) { /* Tx-done interrupt */ | |
690 | int old_tx = lp->old_tx; | |
691 | ||
692 | // if(lance_debug >= 3) { | |
693 | // int i; | |
6aa20a22 | 694 | // |
1da177e4 | 695 | // printk("%s: tx int\n", dev->name); |
6aa20a22 | 696 | // |
1da177e4 LT |
697 | // for(i = 0; i < TX_RING_SIZE; i++) |
698 | // printk("ring %d flag=%04x\n", i, | |
699 | // MEM->tx_head[i].flag); | |
700 | // } | |
6aa20a22 | 701 | |
1da177e4 | 702 | while( old_tx != lp->new_tx) { |
6aa20a22 JG |
703 | struct lance_tx_head *head = &(MEM->tx_head[old_tx]); |
704 | ||
1da177e4 LT |
705 | DPRINTK(3, ("on tx_ring %d\n", old_tx)); |
706 | ||
707 | if (head->flag & TMD1_OWN_CHIP) | |
708 | break; /* It still hasn't been Txed */ | |
6aa20a22 | 709 | |
1da177e4 LT |
710 | if (head->flag & TMD1_ERR) { |
711 | int status = head->misc; | |
09f75cd7 JG |
712 | dev->stats.tx_errors++; |
713 | if (status & TMD3_RTRY) dev->stats.tx_aborted_errors++; | |
714 | if (status & TMD3_LCAR) dev->stats.tx_carrier_errors++; | |
715 | if (status & TMD3_LCOL) dev->stats.tx_window_errors++; | |
1da177e4 | 716 | if (status & (TMD3_UFLO | TMD3_BUFF)) { |
09f75cd7 | 717 | dev->stats.tx_fifo_errors++; |
1da177e4 | 718 | printk("%s: Tx FIFO error\n", |
6aa20a22 | 719 | dev->name); |
1da177e4 LT |
720 | REGA(CSR0) = CSR0_STOP; |
721 | REGA(CSR3) = CSR3_BSWP; | |
722 | lance_init_ring(dev); | |
723 | REGA(CSR0) = CSR0_STRT | CSR0_INEA; | |
724 | return IRQ_HANDLED; | |
725 | } | |
726 | } else if(head->flag & (TMD1_ENP | TMD1_STP)) { | |
6aa20a22 | 727 | |
1da177e4 LT |
728 | head->flag &= ~(TMD1_ENP | TMD1_STP); |
729 | if(head->flag & (TMD1_ONE | TMD1_MORE)) | |
09f75cd7 | 730 | dev->stats.collisions++; |
6aa20a22 | 731 | |
09f75cd7 | 732 | dev->stats.tx_packets++; |
1da177e4 LT |
733 | DPRINTK(3, ("cleared tx ring %d\n", old_tx)); |
734 | } | |
735 | old_tx = (old_tx +1) & TX_RING_MOD_MASK; | |
736 | } | |
737 | ||
738 | lp->old_tx = old_tx; | |
739 | } | |
740 | ||
741 | ||
742 | if (netif_queue_stopped(dev)) { | |
743 | /* The ring is no longer full, clear tbusy. */ | |
744 | netif_start_queue(dev); | |
745 | netif_wake_queue(dev); | |
746 | } | |
747 | ||
748 | if (csr0 & CSR0_RINT) /* Rx interrupt */ | |
749 | lance_rx( dev ); | |
6aa20a22 | 750 | |
1da177e4 | 751 | /* Log misc errors. */ |
09f75cd7 JG |
752 | if (csr0 & CSR0_BABL) dev->stats.tx_errors++; /* Tx babble. */ |
753 | if (csr0 & CSR0_MISS) dev->stats.rx_errors++; /* Missed a Rx frame. */ | |
1da177e4 LT |
754 | if (csr0 & CSR0_MERR) { |
755 | DPRINTK( 1, ( "%s: Bus master arbitration failure (?!?), " | |
756 | "status %04x.\n", dev->name, csr0 )); | |
757 | /* Restart the chip. */ | |
758 | REGA(CSR0) = CSR0_STOP; | |
759 | REGA(CSR3) = CSR3_BSWP; | |
760 | lance_init_ring(dev); | |
761 | REGA(CSR0) = CSR0_STRT | CSR0_INEA; | |
762 | } | |
763 | ||
764 | ||
765 | /* Clear any other interrupt, and set interrupt enable. */ | |
766 | // DREG = CSR0_BABL | CSR0_CERR | CSR0_MISS | CSR0_MERR | | |
767 | // CSR0_IDON | CSR0_INEA; | |
768 | ||
769 | REGA(CSR0) = CSR0_INEA; | |
770 | ||
771 | if(DREG & (CSR0_RINT | CSR0_TINT)) { | |
772 | DPRINTK(2, ("restarting interrupt, csr0=%#04x\n", DREG)); | |
773 | goto still_more; | |
774 | } | |
775 | ||
776 | DPRINTK( 2, ( "%s: exiting interrupt, csr0=%#04x.\n", | |
777 | dev->name, DREG )); | |
778 | in_interrupt = 0; | |
779 | return IRQ_HANDLED; | |
780 | } | |
781 | ||
782 | /* get packet, toss into skbuff */ | |
783 | static int lance_rx( struct net_device *dev ) | |
784 | { | |
785 | struct lance_private *lp = netdev_priv(dev); | |
786 | int entry = lp->new_rx; | |
787 | ||
788 | /* If we own the next entry, it's a new packet. Send it up. */ | |
789 | while( (MEM->rx_head[entry].flag & RMD1_OWN) == RMD1_OWN_HOST ) { | |
790 | struct lance_rx_head *head = &(MEM->rx_head[entry]); | |
791 | int status = head->flag; | |
6aa20a22 | 792 | |
1da177e4 LT |
793 | if (status != (RMD1_ENP|RMD1_STP)) { /* There was an error. */ |
794 | /* There is a tricky error noted by John Murphy, | |
6aa20a22 | 795 | <[email protected]> to Russ Nelson: Even with |
1da177e4 LT |
796 | full-sized buffers it's possible for a jabber packet to use two |
797 | buffers, with only the last correctly noting the error. */ | |
798 | if (status & RMD1_ENP) /* Only count a general error at the */ | |
09f75cd7 JG |
799 | dev->stats.rx_errors++; /* end of a packet.*/ |
800 | if (status & RMD1_FRAM) dev->stats.rx_frame_errors++; | |
801 | if (status & RMD1_OFLO) dev->stats.rx_over_errors++; | |
802 | if (status & RMD1_CRC) dev->stats.rx_crc_errors++; | |
803 | if (status & RMD1_BUFF) dev->stats.rx_fifo_errors++; | |
1da177e4 LT |
804 | head->flag &= (RMD1_ENP|RMD1_STP); |
805 | } else { | |
806 | /* Malloc up new buffer, compatible with net-3. */ | |
807 | // short pkt_len = head->msg_length;// & 0xfff; | |
808 | short pkt_len = (head->msg_length & 0xfff) - 4; | |
809 | struct sk_buff *skb; | |
810 | ||
811 | if (pkt_len < 60) { | |
812 | printk( "%s: Runt packet!\n", dev->name ); | |
09f75cd7 | 813 | dev->stats.rx_errors++; |
1da177e4 LT |
814 | } |
815 | else { | |
816 | skb = dev_alloc_skb( pkt_len+2 ); | |
817 | if (skb == NULL) { | |
818 | DPRINTK( 1, ( "%s: Memory squeeze, deferring packet.\n", | |
819 | dev->name )); | |
6aa20a22 | 820 | |
09f75cd7 | 821 | dev->stats.rx_dropped++; |
1da177e4 LT |
822 | head->msg_length = 0; |
823 | head->flag |= RMD1_OWN_CHIP; | |
824 | lp->new_rx = (lp->new_rx+1) & | |
825 | RX_RING_MOD_MASK; | |
826 | } | |
827 | ||
828 | #if 0 | |
829 | if (lance_debug >= 3) { | |
0795af57 | 830 | u_char *data = PKTBUF_ADDR(head); |
0795af57 | 831 | printk("%s: RX pkt %d type 0x%04x" |
e174961c | 832 | " from %pM to %pM", |
0795af57 | 833 | dev->name, lp->new_tx, ((u_short *)data)[6], |
e174961c | 834 | &data[6], data); |
0795af57 | 835 | |
1da177e4 LT |
836 | printk(" data %02x %02x %02x %02x %02x %02x %02x %02x " |
837 | "len %d at %08x\n", | |
838 | data[15], data[16], data[17], data[18], | |
839 | data[19], data[20], data[21], data[22], | |
840 | pkt_len, data); | |
841 | } | |
842 | #endif | |
843 | if (lance_debug >= 3) { | |
844 | u_char *data = PKTBUF_ADDR(head); | |
845 | printk( "%s: RX pkt %d type 0x%04x len %d\n ", dev->name, entry, ((u_short *)data)[6], pkt_len); | |
6aa20a22 | 846 | } |
1da177e4 LT |
847 | |
848 | ||
1da177e4 LT |
849 | skb_reserve( skb, 2 ); /* 16 byte align */ |
850 | skb_put( skb, pkt_len ); /* Make room */ | |
8c7b7faa | 851 | skb_copy_to_linear_data(skb, |
1da177e4 | 852 | PKTBUF_ADDR(head), |
8c7b7faa | 853 | pkt_len); |
1da177e4 LT |
854 | |
855 | skb->protocol = eth_type_trans( skb, dev ); | |
856 | netif_rx( skb ); | |
09f75cd7 JG |
857 | dev->stats.rx_packets++; |
858 | dev->stats.rx_bytes += pkt_len; | |
1da177e4 LT |
859 | } |
860 | } | |
861 | ||
862 | // head->buf_length = -PKT_BUF_SZ | 0xf000; | |
863 | head->msg_length = 0; | |
864 | head->flag = RMD1_OWN_CHIP; | |
865 | ||
866 | entry = lp->new_rx = (lp->new_rx +1) & RX_RING_MOD_MASK; | |
867 | } | |
868 | ||
869 | /* From lance.c (Donald Becker): */ | |
870 | /* We should check that at least two ring entries are free. | |
871 | If not, we should free one and mark stats->rx_dropped++. */ | |
872 | ||
873 | return 0; | |
874 | } | |
875 | ||
876 | ||
877 | static int lance_close( struct net_device *dev ) | |
878 | { | |
879 | struct lance_private *lp = netdev_priv(dev); | |
880 | ||
881 | netif_stop_queue(dev); | |
882 | ||
883 | AREG = CSR0; | |
884 | ||
885 | DPRINTK( 2, ( "%s: Shutting down ethercard, status was %2.2x.\n", | |
886 | dev->name, DREG )); | |
887 | ||
888 | /* We stop the LANCE here -- it occasionally polls | |
889 | memory if we don't. */ | |
890 | DREG = CSR0_STOP; | |
891 | return 0; | |
892 | } | |
893 | ||
894 | ||
1da177e4 LT |
895 | /* Set or clear the multicast filter for this adaptor. |
896 | num_addrs == -1 Promiscuous mode, receive all packets | |
897 | num_addrs == 0 Normal mode, clear multicast list | |
898 | num_addrs > 0 Multicast mode, receive normal and MC packets, and do | |
899 | best-effort filtering. | |
900 | */ | |
901 | ||
902 | /* completely untested on a sun3 */ | |
903 | static void set_multicast_list( struct net_device *dev ) | |
904 | { | |
905 | struct lance_private *lp = netdev_priv(dev); | |
906 | ||
907 | if(netif_queue_stopped(dev)) | |
908 | /* Only possible if board is already started */ | |
909 | return; | |
910 | ||
911 | /* We take the simple way out and always enable promiscuous mode. */ | |
912 | DREG = CSR0_STOP; /* Temporarily stop the lance. */ | |
913 | ||
914 | if (dev->flags & IFF_PROMISC) { | |
915 | /* Log any net taps. */ | |
d5b20697 | 916 | DPRINTK( 3, ( "%s: Promiscuous mode enabled.\n", dev->name )); |
1da177e4 LT |
917 | REGA( CSR15 ) = 0x8000; /* Set promiscuous mode */ |
918 | } else { | |
919 | short multicast_table[4]; | |
920 | int num_addrs = dev->mc_count; | |
921 | int i; | |
922 | /* We don't use the multicast table, but rely on upper-layer | |
923 | * filtering. */ | |
924 | memset( multicast_table, (num_addrs == 0) ? 0 : -1, | |
925 | sizeof(multicast_table) ); | |
926 | for( i = 0; i < 4; i++ ) | |
927 | REGA( CSR8+i ) = multicast_table[i]; | |
928 | REGA( CSR15 ) = 0; /* Unset promiscuous mode */ | |
929 | } | |
930 | ||
931 | /* | |
932 | * Always set BSWP after a STOP as STOP puts it back into | |
933 | * little endian mode. | |
934 | */ | |
935 | REGA( CSR3 ) = CSR3_BSWP; | |
936 | ||
937 | /* Resume normal operation and reset AREG to CSR0 */ | |
938 | REGA( CSR0 ) = CSR0_IDON | CSR0_INEA | CSR0_STRT; | |
939 | } | |
940 | ||
941 | ||
942 | #ifdef MODULE | |
943 | ||
944 | static struct net_device *sun3lance_dev; | |
945 | ||
afc8eb46 | 946 | int __init init_module(void) |
1da177e4 LT |
947 | { |
948 | sun3lance_dev = sun3lance_probe(-1); | |
949 | if (IS_ERR(sun3lance_dev)) | |
950 | return PTR_ERR(sun3lance_dev); | |
951 | return 0; | |
952 | } | |
953 | ||
afc8eb46 | 954 | void __exit cleanup_module(void) |
1da177e4 LT |
955 | { |
956 | unregister_netdev(sun3lance_dev); | |
957 | #ifdef CONFIG_SUN3 | |
437111ca | 958 | iounmap((void __iomem *)sun3lance_dev->base_addr); |
1da177e4 LT |
959 | #endif |
960 | free_netdev(sun3lance_dev); | |
961 | } | |
962 | ||
963 | #endif /* MODULE */ | |
964 |