]>
Commit | Line | Data |
---|---|---|
500fe141 SO |
1 | /* |
2 | * LP5521 LED chip driver. | |
3 | * | |
4 | * Copyright (C) 2010 Nokia Corporation | |
a2387cb9 | 5 | * Copyright (C) 2012 Texas Instruments |
500fe141 SO |
6 | * |
7 | * Contact: Samu Onkalo <[email protected]> | |
a2387cb9 | 8 | * Milo(Woogyom) Kim <[email protected]> |
500fe141 SO |
9 | * |
10 | * This program is free software; you can redistribute it and/or | |
11 | * modify it under the terms of the GNU General Public License | |
12 | * version 2 as published by the Free Software Foundation. | |
13 | * | |
14 | * This program is distributed in the hope that it will be useful, but | |
15 | * WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
17 | * General Public License for more details. | |
18 | * | |
19 | * You should have received a copy of the GNU General Public License | |
20 | * along with this program; if not, write to the Free Software | |
21 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | |
22 | * 02110-1301 USA | |
23 | */ | |
24 | ||
500fe141 | 25 | #include <linux/delay.h> |
79bcc10b MWK |
26 | #include <linux/firmware.h> |
27 | #include <linux/i2c.h> | |
28 | #include <linux/init.h> | |
500fe141 | 29 | #include <linux/leds.h> |
79bcc10b MWK |
30 | #include <linux/module.h> |
31 | #include <linux/mutex.h> | |
6a0c9a47 | 32 | #include <linux/platform_data/leds-lp55xx.h> |
79bcc10b | 33 | #include <linux/slab.h> |
7542a04b | 34 | #include <linux/of.h> |
6a0c9a47 MWK |
35 | |
36 | #include "leds-lp55xx-common.h" | |
500fe141 | 37 | |
12f022d2 MWK |
38 | #define LP5521_PROGRAM_LENGTH 32 |
39 | #define LP5521_MAX_LEDS 3 | |
40 | #define LP5521_CMD_DIRECT 0x3F | |
500fe141 SO |
41 | |
42 | /* Registers */ | |
43 | #define LP5521_REG_ENABLE 0x00 | |
44 | #define LP5521_REG_OP_MODE 0x01 | |
45 | #define LP5521_REG_R_PWM 0x02 | |
46 | #define LP5521_REG_G_PWM 0x03 | |
47 | #define LP5521_REG_B_PWM 0x04 | |
48 | #define LP5521_REG_R_CURRENT 0x05 | |
49 | #define LP5521_REG_G_CURRENT 0x06 | |
50 | #define LP5521_REG_B_CURRENT 0x07 | |
51 | #define LP5521_REG_CONFIG 0x08 | |
500fe141 SO |
52 | #define LP5521_REG_STATUS 0x0C |
53 | #define LP5521_REG_RESET 0x0D | |
500fe141 SO |
54 | #define LP5521_REG_R_PROG_MEM 0x10 |
55 | #define LP5521_REG_G_PROG_MEM 0x30 | |
56 | #define LP5521_REG_B_PROG_MEM 0x50 | |
57 | ||
500fe141 SO |
58 | /* Base register to set LED current */ |
59 | #define LP5521_REG_LED_CURRENT_BASE LP5521_REG_R_CURRENT | |
500fe141 SO |
60 | /* Base register to set the brightness */ |
61 | #define LP5521_REG_LED_PWM_BASE LP5521_REG_R_PWM | |
62 | ||
63 | /* Bits in ENABLE register */ | |
64 | #define LP5521_MASTER_ENABLE 0x40 /* Chip master enable */ | |
65 | #define LP5521_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */ | |
66 | #define LP5521_EXEC_RUN 0x2A | |
32a2f747 KM |
67 | #define LP5521_ENABLE_DEFAULT \ |
68 | (LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM) | |
69 | #define LP5521_ENABLE_RUN_PROGRAM \ | |
70 | (LP5521_ENABLE_DEFAULT | LP5521_EXEC_RUN) | |
500fe141 | 71 | |
81f2a5b4 KM |
72 | /* CONFIG register */ |
73 | #define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz */ | |
74 | #define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */ | |
75 | #define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */ | |
76 | #define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass mode */ | |
77 | #define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */ | |
78 | #define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection */ | |
79 | #define LP5521_R_TO_BATT 0x04 /* R out: 0 = CP, 1 = Vbat */ | |
80 | #define LP5521_CLK_INT 0x01 /* Internal clock */ | |
81 | #define LP5521_DEFAULT_CFG \ | |
82 | (LP5521_PWM_HF | LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO) | |
83 | ||
500fe141 SO |
84 | /* Status */ |
85 | #define LP5521_EXT_CLK_USED 0x08 | |
86 | ||
b3c49c05 SK |
87 | /* default R channel current register value */ |
88 | #define LP5521_REG_R_CURR_DEFAULT 0xAF | |
89 | ||
48068d5d MWK |
90 | /* Reset register value */ |
91 | #define LP5521_RESET 0xFF | |
92 | ||
9ce7cb17 MWK |
93 | /* Program Memory Operations */ |
94 | #define LP5521_MODE_R_M 0x30 /* Operation Mode Register */ | |
95 | #define LP5521_MODE_G_M 0x0C | |
96 | #define LP5521_MODE_B_M 0x03 | |
97 | #define LP5521_LOAD_R 0x10 | |
98 | #define LP5521_LOAD_G 0x04 | |
99 | #define LP5521_LOAD_B 0x01 | |
100 | ||
101 | #define LP5521_R_IS_LOADING(mode) \ | |
102 | ((mode & LP5521_MODE_R_M) == LP5521_LOAD_R) | |
103 | #define LP5521_G_IS_LOADING(mode) \ | |
104 | ((mode & LP5521_MODE_G_M) == LP5521_LOAD_G) | |
105 | #define LP5521_B_IS_LOADING(mode) \ | |
106 | ((mode & LP5521_MODE_B_M) == LP5521_LOAD_B) | |
107 | ||
108 | #define LP5521_EXEC_R_M 0x30 /* Enable Register */ | |
109 | #define LP5521_EXEC_G_M 0x0C | |
110 | #define LP5521_EXEC_B_M 0x03 | |
111 | #define LP5521_EXEC_M 0x3F | |
112 | #define LP5521_RUN_R 0x20 | |
113 | #define LP5521_RUN_G 0x08 | |
114 | #define LP5521_RUN_B 0x02 | |
500fe141 | 115 | |
9ce7cb17 MWK |
116 | static inline void lp5521_wait_opmode_done(void) |
117 | { | |
118 | /* operation mode change needs to be longer than 153 us */ | |
119 | usleep_range(200, 300); | |
120 | } | |
121 | ||
94482174 MWK |
122 | static inline void lp5521_wait_enable_done(void) |
123 | { | |
124 | /* it takes more 488 us to update ENABLE register */ | |
125 | usleep_range(500, 600); | |
126 | } | |
127 | ||
a96bfa13 MWK |
128 | static void lp5521_set_led_current(struct lp55xx_led *led, u8 led_current) |
129 | { | |
130 | led->led_current = led_current; | |
131 | lp55xx_write(led->chip, LP5521_REG_LED_CURRENT_BASE + led->chan_nr, | |
132 | led_current); | |
133 | } | |
134 | ||
9ce7cb17 | 135 | static void lp5521_load_engine(struct lp55xx_chip *chip) |
500fe141 | 136 | { |
9ce7cb17 MWK |
137 | enum lp55xx_engine_index idx = chip->engine_idx; |
138 | u8 mask[] = { | |
139 | [LP55XX_ENGINE_1] = LP5521_MODE_R_M, | |
140 | [LP55XX_ENGINE_2] = LP5521_MODE_G_M, | |
141 | [LP55XX_ENGINE_3] = LP5521_MODE_B_M, | |
142 | }; | |
500fe141 | 143 | |
9ce7cb17 MWK |
144 | u8 val[] = { |
145 | [LP55XX_ENGINE_1] = LP5521_LOAD_R, | |
146 | [LP55XX_ENGINE_2] = LP5521_LOAD_G, | |
147 | [LP55XX_ENGINE_3] = LP5521_LOAD_B, | |
148 | }; | |
500fe141 | 149 | |
9ce7cb17 | 150 | lp55xx_update_bits(chip, LP5521_REG_OP_MODE, mask[idx], val[idx]); |
500fe141 | 151 | |
9ce7cb17 MWK |
152 | lp5521_wait_opmode_done(); |
153 | } | |
500fe141 | 154 | |
9ce7cb17 MWK |
155 | static void lp5521_stop_engine(struct lp55xx_chip *chip) |
156 | { | |
157 | lp55xx_write(chip, LP5521_REG_OP_MODE, 0); | |
158 | lp5521_wait_opmode_done(); | |
500fe141 SO |
159 | } |
160 | ||
9ce7cb17 | 161 | static void lp5521_run_engine(struct lp55xx_chip *chip, bool start) |
500fe141 | 162 | { |
500fe141 | 163 | int ret; |
500fe141 | 164 | u8 mode; |
9ce7cb17 | 165 | u8 exec; |
500fe141 | 166 | |
9ce7cb17 MWK |
167 | /* stop engine */ |
168 | if (!start) { | |
169 | lp5521_stop_engine(chip); | |
170 | lp55xx_write(chip, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); | |
171 | lp5521_wait_opmode_done(); | |
172 | return; | |
173 | } | |
174 | ||
175 | /* | |
176 | * To run the engine, | |
177 | * operation mode and enable register should updated at the same time | |
178 | */ | |
179 | ||
180 | ret = lp55xx_read(chip, LP5521_REG_OP_MODE, &mode); | |
5bc9ad77 | 181 | if (ret) |
9ce7cb17 | 182 | return; |
5bc9ad77 | 183 | |
9ce7cb17 | 184 | ret = lp55xx_read(chip, LP5521_REG_ENABLE, &exec); |
5bc9ad77 | 185 | if (ret) |
9ce7cb17 MWK |
186 | return; |
187 | ||
188 | /* change operation mode to RUN only when each engine is loading */ | |
189 | if (LP5521_R_IS_LOADING(mode)) { | |
190 | mode = (mode & ~LP5521_MODE_R_M) | LP5521_RUN_R; | |
191 | exec = (exec & ~LP5521_EXEC_R_M) | LP5521_RUN_R; | |
192 | } | |
193 | ||
194 | if (LP5521_G_IS_LOADING(mode)) { | |
195 | mode = (mode & ~LP5521_MODE_G_M) | LP5521_RUN_G; | |
196 | exec = (exec & ~LP5521_EXEC_G_M) | LP5521_RUN_G; | |
197 | } | |
198 | ||
199 | if (LP5521_B_IS_LOADING(mode)) { | |
200 | mode = (mode & ~LP5521_MODE_B_M) | LP5521_RUN_B; | |
201 | exec = (exec & ~LP5521_EXEC_B_M) | LP5521_RUN_B; | |
202 | } | |
203 | ||
204 | lp55xx_write(chip, LP5521_REG_OP_MODE, mode); | |
205 | lp5521_wait_opmode_done(); | |
206 | ||
207 | lp55xx_update_bits(chip, LP5521_REG_ENABLE, LP5521_EXEC_M, exec); | |
208 | lp5521_wait_enable_done(); | |
209 | } | |
210 | ||
211 | static int lp5521_update_program_memory(struct lp55xx_chip *chip, | |
212 | const u8 *data, size_t size) | |
213 | { | |
214 | enum lp55xx_engine_index idx = chip->engine_idx; | |
215 | u8 pattern[LP5521_PROGRAM_LENGTH] = {0}; | |
216 | u8 addr[] = { | |
217 | [LP55XX_ENGINE_1] = LP5521_REG_R_PROG_MEM, | |
218 | [LP55XX_ENGINE_2] = LP5521_REG_G_PROG_MEM, | |
219 | [LP55XX_ENGINE_3] = LP5521_REG_B_PROG_MEM, | |
220 | }; | |
221 | unsigned cmd; | |
222 | char c[3]; | |
9ce7cb17 | 223 | int nrchars; |
9ce7cb17 | 224 | int ret; |
1eca0b3a MK |
225 | int offset = 0; |
226 | int i = 0; | |
9ce7cb17 | 227 | |
9ce7cb17 MWK |
228 | while ((offset < size - 1) && (i < LP5521_PROGRAM_LENGTH)) { |
229 | /* separate sscanfs because length is working only for %s */ | |
230 | ret = sscanf(data + offset, "%2s%n ", c, &nrchars); | |
231 | if (ret != 1) | |
232 | goto err; | |
233 | ||
234 | ret = sscanf(c, "%2x", &cmd); | |
235 | if (ret != 1) | |
236 | goto err; | |
237 | ||
238 | pattern[i] = (u8)cmd; | |
239 | offset += nrchars; | |
240 | i++; | |
241 | } | |
242 | ||
243 | /* Each instruction is 16bit long. Check that length is even */ | |
244 | if (i % 2) | |
245 | goto err; | |
246 | ||
c0e5e9b5 MK |
247 | mutex_lock(&chip->lock); |
248 | ||
1eca0b3a | 249 | for (i = 0; i < LP5521_PROGRAM_LENGTH; i++) { |
c0e5e9b5 MK |
250 | ret = lp55xx_write(chip, addr[idx] + i, pattern[i]); |
251 | if (ret) { | |
252 | mutex_unlock(&chip->lock); | |
253 | return -EINVAL; | |
254 | } | |
255 | } | |
256 | ||
257 | mutex_unlock(&chip->lock); | |
258 | ||
259 | return size; | |
9ce7cb17 MWK |
260 | |
261 | err: | |
262 | dev_err(&chip->cl->dev, "wrong pattern format\n"); | |
263 | return -EINVAL; | |
264 | } | |
265 | ||
266 | static void lp5521_firmware_loaded(struct lp55xx_chip *chip) | |
267 | { | |
268 | const struct firmware *fw = chip->fw; | |
269 | ||
270 | if (fw->size > LP5521_PROGRAM_LENGTH) { | |
271 | dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n", | |
272 | fw->size); | |
273 | return; | |
274 | } | |
500fe141 | 275 | |
9ce7cb17 MWK |
276 | /* |
277 | * Program momery sequence | |
278 | * 1) set engine mode to "LOAD" | |
279 | * 2) write firmware data into program memory | |
280 | */ | |
281 | ||
282 | lp5521_load_engine(chip); | |
283 | lp5521_update_program_memory(chip, fw->data, fw->size); | |
500fe141 SO |
284 | } |
285 | ||
ffbdccdb | 286 | static int lp5521_post_init_device(struct lp55xx_chip *chip) |
500fe141 | 287 | { |
500fe141 | 288 | int ret; |
94482174 | 289 | u8 val; |
500fe141 | 290 | |
94482174 MWK |
291 | /* |
292 | * Make sure that the chip is reset by reading back the r channel | |
293 | * current reg. This is dummy read is required on some platforms - | |
294 | * otherwise further access to the R G B channels in the | |
295 | * LP5521_REG_ENABLE register will not have any effect - strange! | |
296 | */ | |
ffbdccdb | 297 | ret = lp55xx_read(chip, LP5521_REG_R_CURRENT, &val); |
94482174 | 298 | if (ret) { |
ffbdccdb | 299 | dev_err(&chip->cl->dev, "error in resetting chip\n"); |
94482174 MWK |
300 | return ret; |
301 | } | |
302 | if (val != LP5521_REG_R_CURR_DEFAULT) { | |
ffbdccdb | 303 | dev_err(&chip->cl->dev, |
94482174 MWK |
304 | "unexpected data in register (expected 0x%x got 0x%x)\n", |
305 | LP5521_REG_R_CURR_DEFAULT, val); | |
306 | ret = -EINVAL; | |
307 | return ret; | |
308 | } | |
309 | usleep_range(10000, 20000); | |
500fe141 | 310 | |
500fe141 | 311 | /* Set all PWMs to direct control mode */ |
ffbdccdb | 312 | ret = lp55xx_write(chip, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); |
500fe141 | 313 | |
81f2a5b4 KM |
314 | /* Update configuration for the clock setting */ |
315 | val = LP5521_DEFAULT_CFG; | |
316 | if (!lp55xx_is_extclk_used(chip)) | |
317 | val |= LP5521_CLK_INT; | |
318 | ||
ffbdccdb | 319 | ret = lp55xx_write(chip, LP5521_REG_CONFIG, val); |
94482174 MWK |
320 | if (ret) |
321 | return ret; | |
500fe141 SO |
322 | |
323 | /* Initialize all channels PWM to zero -> leds off */ | |
ffbdccdb MWK |
324 | lp55xx_write(chip, LP5521_REG_R_PWM, 0); |
325 | lp55xx_write(chip, LP5521_REG_G_PWM, 0); | |
326 | lp55xx_write(chip, LP5521_REG_B_PWM, 0); | |
500fe141 SO |
327 | |
328 | /* Set engines are set to run state when OP_MODE enables engines */ | |
ffbdccdb | 329 | ret = lp55xx_write(chip, LP5521_REG_ENABLE, LP5521_ENABLE_RUN_PROGRAM); |
94482174 MWK |
330 | if (ret) |
331 | return ret; | |
500fe141 | 332 | |
94482174 MWK |
333 | lp5521_wait_enable_done(); |
334 | ||
335 | return 0; | |
500fe141 SO |
336 | } |
337 | ||
9ca3bd80 | 338 | static int lp5521_run_selftest(struct lp55xx_chip *chip, char *buf) |
500fe141 | 339 | { |
9ca3bd80 | 340 | struct lp55xx_platform_data *pdata = chip->pdata; |
500fe141 SO |
341 | int ret; |
342 | u8 status; | |
343 | ||
9ca3bd80 | 344 | ret = lp55xx_read(chip, LP5521_REG_STATUS, &status); |
500fe141 SO |
345 | if (ret < 0) |
346 | return ret; | |
347 | ||
9ca3bd80 MWK |
348 | if (pdata->clock_mode != LP55XX_CLOCK_EXT) |
349 | return 0; | |
350 | ||
500fe141 | 351 | /* Check that ext clock is really in use if requested */ |
9ca3bd80 MWK |
352 | if ((status & LP5521_EXT_CLK_USED) == 0) |
353 | return -EIO; | |
354 | ||
500fe141 SO |
355 | return 0; |
356 | } | |
357 | ||
500fe141 SO |
358 | static void lp5521_led_brightness_work(struct work_struct *work) |
359 | { | |
a6e4679a | 360 | struct lp55xx_led *led = container_of(work, struct lp55xx_led, |
500fe141 | 361 | brightness_work); |
a6e4679a | 362 | struct lp55xx_chip *chip = led->chip; |
500fe141 SO |
363 | |
364 | mutex_lock(&chip->lock); | |
a6e4679a | 365 | lp55xx_write(chip, LP5521_REG_LED_PWM_BASE + led->chan_nr, |
500fe141 SO |
366 | led->brightness); |
367 | mutex_unlock(&chip->lock); | |
368 | } | |
369 | ||
c0e5e9b5 MK |
370 | static ssize_t show_engine_mode(struct device *dev, |
371 | struct device_attribute *attr, | |
372 | char *buf, int nr) | |
373 | { | |
374 | struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
375 | struct lp55xx_chip *chip = led->chip; | |
376 | enum lp55xx_engine_mode mode = chip->engines[nr - 1].mode; | |
377 | ||
378 | switch (mode) { | |
379 | case LP55XX_ENGINE_RUN: | |
380 | return sprintf(buf, "run\n"); | |
381 | case LP55XX_ENGINE_LOAD: | |
382 | return sprintf(buf, "load\n"); | |
383 | case LP55XX_ENGINE_DISABLED: | |
384 | default: | |
385 | return sprintf(buf, "disabled\n"); | |
386 | } | |
387 | } | |
388 | show_mode(1) | |
389 | show_mode(2) | |
390 | show_mode(3) | |
391 | ||
392 | static ssize_t store_engine_mode(struct device *dev, | |
393 | struct device_attribute *attr, | |
394 | const char *buf, size_t len, int nr) | |
395 | { | |
396 | struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
397 | struct lp55xx_chip *chip = led->chip; | |
398 | struct lp55xx_engine *engine = &chip->engines[nr - 1]; | |
399 | ||
400 | mutex_lock(&chip->lock); | |
401 | ||
402 | chip->engine_idx = nr; | |
403 | ||
404 | if (!strncmp(buf, "run", 3)) { | |
405 | lp5521_run_engine(chip, true); | |
406 | engine->mode = LP55XX_ENGINE_RUN; | |
407 | } else if (!strncmp(buf, "load", 4)) { | |
408 | lp5521_stop_engine(chip); | |
409 | lp5521_load_engine(chip); | |
410 | engine->mode = LP55XX_ENGINE_LOAD; | |
411 | } else if (!strncmp(buf, "disabled", 8)) { | |
412 | lp5521_stop_engine(chip); | |
413 | engine->mode = LP55XX_ENGINE_DISABLED; | |
414 | } | |
415 | ||
416 | mutex_unlock(&chip->lock); | |
417 | ||
418 | return len; | |
419 | } | |
420 | store_mode(1) | |
421 | store_mode(2) | |
422 | store_mode(3) | |
423 | ||
424 | static ssize_t store_engine_load(struct device *dev, | |
425 | struct device_attribute *attr, | |
426 | const char *buf, size_t len, int nr) | |
427 | { | |
428 | struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
429 | struct lp55xx_chip *chip = led->chip; | |
430 | ||
431 | mutex_lock(&chip->lock); | |
432 | ||
433 | chip->engine_idx = nr; | |
434 | lp5521_load_engine(chip); | |
435 | ||
436 | mutex_unlock(&chip->lock); | |
437 | ||
438 | return lp5521_update_program_memory(chip, buf, len); | |
439 | } | |
440 | store_load(1) | |
441 | store_load(2) | |
442 | store_load(3) | |
443 | ||
500fe141 SO |
444 | static ssize_t lp5521_selftest(struct device *dev, |
445 | struct device_attribute *attr, | |
446 | char *buf) | |
447 | { | |
9ca3bd80 MWK |
448 | struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); |
449 | struct lp55xx_chip *chip = led->chip; | |
500fe141 SO |
450 | int ret; |
451 | ||
452 | mutex_lock(&chip->lock); | |
453 | ret = lp5521_run_selftest(chip, buf); | |
454 | mutex_unlock(&chip->lock); | |
24d32128 KM |
455 | |
456 | return scnprintf(buf, PAGE_SIZE, "%s\n", ret ? "FAIL" : "OK"); | |
500fe141 SO |
457 | } |
458 | ||
500fe141 | 459 | /* device attributes */ |
c0e5e9b5 MK |
460 | static LP55XX_DEV_ATTR_RW(engine1_mode, show_engine1_mode, store_engine1_mode); |
461 | static LP55XX_DEV_ATTR_RW(engine2_mode, show_engine2_mode, store_engine2_mode); | |
462 | static LP55XX_DEV_ATTR_RW(engine3_mode, show_engine3_mode, store_engine3_mode); | |
463 | static LP55XX_DEV_ATTR_WO(engine1_load, store_engine1_load); | |
464 | static LP55XX_DEV_ATTR_WO(engine2_load, store_engine2_load); | |
465 | static LP55XX_DEV_ATTR_WO(engine3_load, store_engine3_load); | |
466 | static LP55XX_DEV_ATTR_RO(selftest, lp5521_selftest); | |
500fe141 SO |
467 | |
468 | static struct attribute *lp5521_attributes[] = { | |
c0e5e9b5 MK |
469 | &dev_attr_engine1_mode.attr, |
470 | &dev_attr_engine2_mode.attr, | |
471 | &dev_attr_engine3_mode.attr, | |
472 | &dev_attr_engine1_load.attr, | |
473 | &dev_attr_engine2_load.attr, | |
474 | &dev_attr_engine3_load.attr, | |
500fe141 | 475 | &dev_attr_selftest.attr, |
500fe141 SO |
476 | NULL |
477 | }; | |
478 | ||
479 | static const struct attribute_group lp5521_group = { | |
480 | .attrs = lp5521_attributes, | |
481 | }; | |
482 | ||
48068d5d MWK |
483 | /* Chip specific configurations */ |
484 | static struct lp55xx_device_config lp5521_cfg = { | |
485 | .reset = { | |
486 | .addr = LP5521_REG_RESET, | |
487 | .val = LP5521_RESET, | |
488 | }, | |
e3a700d8 MWK |
489 | .enable = { |
490 | .addr = LP5521_REG_ENABLE, | |
491 | .val = LP5521_ENABLE_DEFAULT, | |
492 | }, | |
0e202346 | 493 | .max_channel = LP5521_MAX_LEDS, |
ffbdccdb | 494 | .post_init_device = lp5521_post_init_device, |
a6e4679a | 495 | .brightness_work_fn = lp5521_led_brightness_work, |
a96bfa13 | 496 | .set_led_current = lp5521_set_led_current, |
9ce7cb17 MWK |
497 | .firmware_cb = lp5521_firmware_loaded, |
498 | .run_engine = lp5521_run_engine, | |
e73c0ce6 | 499 | .dev_attr_group = &lp5521_group, |
48068d5d MWK |
500 | }; |
501 | ||
98ea1ea2 | 502 | static int lp5521_probe(struct i2c_client *client, |
500fe141 SO |
503 | const struct i2c_device_id *id) |
504 | { | |
1904f83d | 505 | int ret; |
6a0c9a47 MWK |
506 | struct lp55xx_chip *chip; |
507 | struct lp55xx_led *led; | |
7542a04b LW |
508 | struct lp55xx_platform_data *pdata; |
509 | struct device_node *np = client->dev.of_node; | |
510 | ||
87aae1ea | 511 | if (!dev_get_platdata(&client->dev)) { |
7542a04b LW |
512 | if (np) { |
513 | ret = lp55xx_of_populate_pdata(&client->dev, np); | |
514 | if (ret < 0) | |
515 | return ret; | |
516 | } else { | |
517 | dev_err(&client->dev, "no platform data\n"); | |
518 | return -EINVAL; | |
519 | } | |
500fe141 | 520 | } |
87aae1ea | 521 | pdata = dev_get_platdata(&client->dev); |
500fe141 | 522 | |
6a0c9a47 MWK |
523 | chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); |
524 | if (!chip) | |
525 | return -ENOMEM; | |
526 | ||
527 | led = devm_kzalloc(&client->dev, | |
528 | sizeof(*led) * pdata->num_channels, GFP_KERNEL); | |
529 | if (!led) | |
530 | return -ENOMEM; | |
531 | ||
532 | chip->cl = client; | |
533 | chip->pdata = pdata; | |
48068d5d | 534 | chip->cfg = &lp5521_cfg; |
6a0c9a47 MWK |
535 | |
536 | mutex_init(&chip->lock); | |
500fe141 | 537 | |
6a0c9a47 | 538 | i2c_set_clientdata(client, led); |
500fe141 | 539 | |
22ebeb48 | 540 | ret = lp55xx_init_device(chip); |
944f7b1d | 541 | if (ret) |
f6c64c6f | 542 | goto err_init; |
500fe141 SO |
543 | |
544 | dev_info(&client->dev, "%s programmable led chip found\n", id->name); | |
545 | ||
9e9b3db1 | 546 | ret = lp55xx_register_leds(led, chip); |
f6524808 | 547 | if (ret) |
9e9b3db1 | 548 | goto err_register_leds; |
500fe141 | 549 | |
e73c0ce6 | 550 | ret = lp55xx_register_sysfs(chip); |
500fe141 SO |
551 | if (ret) { |
552 | dev_err(&client->dev, "registering sysfs failed\n"); | |
e73c0ce6 | 553 | goto err_register_sysfs; |
500fe141 | 554 | } |
e73c0ce6 MWK |
555 | |
556 | return 0; | |
557 | ||
558 | err_register_sysfs: | |
c3a68ebf | 559 | lp55xx_unregister_leds(led, chip); |
9e9b3db1 | 560 | err_register_leds: |
6ce61762 | 561 | lp55xx_deinit_device(chip); |
f6c64c6f | 562 | err_init: |
500fe141 SO |
563 | return ret; |
564 | } | |
565 | ||
678e8a6b | 566 | static int lp5521_remove(struct i2c_client *client) |
500fe141 | 567 | { |
6ce61762 MWK |
568 | struct lp55xx_led *led = i2c_get_clientdata(client); |
569 | struct lp55xx_chip *chip = led->chip; | |
500fe141 | 570 | |
87cc4bde MWK |
571 | lp5521_stop_engine(chip); |
572 | lp55xx_unregister_sysfs(chip); | |
c3a68ebf | 573 | lp55xx_unregister_leds(led, chip); |
6ce61762 | 574 | lp55xx_deinit_device(chip); |
500fe141 | 575 | |
500fe141 SO |
576 | return 0; |
577 | } | |
578 | ||
579 | static const struct i2c_device_id lp5521_id[] = { | |
580 | { "lp5521", 0 }, /* Three channel chip */ | |
581 | { } | |
582 | }; | |
583 | MODULE_DEVICE_TABLE(i2c, lp5521_id); | |
584 | ||
b548a34b AL |
585 | #ifdef CONFIG_OF |
586 | static const struct of_device_id of_lp5521_leds_match[] = { | |
587 | { .compatible = "national,lp5521", }, | |
588 | {}, | |
589 | }; | |
590 | ||
591 | MODULE_DEVICE_TABLE(of, of_lp5521_leds_match); | |
592 | #endif | |
500fe141 SO |
593 | static struct i2c_driver lp5521_driver = { |
594 | .driver = { | |
595 | .name = "lp5521", | |
b548a34b | 596 | .of_match_table = of_match_ptr(of_lp5521_leds_match), |
500fe141 SO |
597 | }, |
598 | .probe = lp5521_probe, | |
df07cf81 | 599 | .remove = lp5521_remove, |
500fe141 SO |
600 | .id_table = lp5521_id, |
601 | }; | |
602 | ||
09a0d183 | 603 | module_i2c_driver(lp5521_driver); |
500fe141 SO |
604 | |
605 | MODULE_AUTHOR("Mathias Nyman, Yuri Zaporozhets, Samu Onkalo"); | |
a2387cb9 | 606 | MODULE_AUTHOR("Milo Kim <[email protected]>"); |
500fe141 SO |
607 | MODULE_DESCRIPTION("LP5521 LED engine"); |
608 | MODULE_LICENSE("GPL v2"); |