]>
Commit | Line | Data |
---|---|---|
74d1e007 SW |
1 | // SPDX-License-Identifier: GPL-2.0+ |
2 | /* | |
3 | * Raspberry Pi voltage sensor driver | |
4 | * | |
5 | * Based on firmware/raspberrypi.c by Noralf Trønnes | |
6 | * | |
7 | * Copyright (C) 2018 Stefan Wahren <[email protected]> | |
8 | */ | |
9 | #include <linux/device.h> | |
10 | #include <linux/err.h> | |
11 | #include <linux/hwmon.h> | |
12 | #include <linux/module.h> | |
13 | #include <linux/platform_device.h> | |
14 | #include <linux/slab.h> | |
15 | #include <linux/workqueue.h> | |
16 | #include <soc/bcm2835/raspberrypi-firmware.h> | |
17 | ||
18 | #define UNDERVOLTAGE_STICKY_BIT BIT(16) | |
19 | ||
20 | struct rpi_hwmon_data { | |
21 | struct device *hwmon_dev; | |
22 | struct rpi_firmware *fw; | |
23 | u32 last_throttled; | |
24 | struct delayed_work get_values_poll_work; | |
25 | }; | |
26 | ||
27 | static void rpi_firmware_get_throttled(struct rpi_hwmon_data *data) | |
28 | { | |
29 | u32 new_uv, old_uv, value; | |
30 | int ret; | |
31 | ||
32 | /* Request firmware to clear sticky bits */ | |
33 | value = 0xffff; | |
34 | ||
35 | ret = rpi_firmware_property(data->fw, RPI_FIRMWARE_GET_THROTTLED, | |
36 | &value, sizeof(value)); | |
37 | if (ret) { | |
38 | dev_err_once(data->hwmon_dev, "Failed to get throttled (%d)\n", | |
39 | ret); | |
40 | return; | |
41 | } | |
42 | ||
43 | new_uv = value & UNDERVOLTAGE_STICKY_BIT; | |
44 | old_uv = data->last_throttled & UNDERVOLTAGE_STICKY_BIT; | |
45 | data->last_throttled = value; | |
46 | ||
47 | if (new_uv == old_uv) | |
48 | return; | |
49 | ||
50 | if (new_uv) | |
51 | dev_crit(data->hwmon_dev, "Undervoltage detected!\n"); | |
52 | else | |
53 | dev_info(data->hwmon_dev, "Voltage normalised\n"); | |
54 | ||
55 | sysfs_notify(&data->hwmon_dev->kobj, NULL, "in0_lcrit_alarm"); | |
56 | } | |
57 | ||
58 | static void get_values_poll(struct work_struct *work) | |
59 | { | |
60 | struct rpi_hwmon_data *data; | |
61 | ||
62 | data = container_of(work, struct rpi_hwmon_data, | |
63 | get_values_poll_work.work); | |
64 | ||
65 | rpi_firmware_get_throttled(data); | |
66 | ||
67 | /* | |
68 | * We can't run faster than the sticky shift (100ms) since we get | |
69 | * flipping in the sticky bits that are cleared. | |
70 | */ | |
71 | schedule_delayed_work(&data->get_values_poll_work, 2 * HZ); | |
72 | } | |
73 | ||
74 | static int rpi_read(struct device *dev, enum hwmon_sensor_types type, | |
75 | u32 attr, int channel, long *val) | |
76 | { | |
77 | struct rpi_hwmon_data *data = dev_get_drvdata(dev); | |
78 | ||
79 | *val = !!(data->last_throttled & UNDERVOLTAGE_STICKY_BIT); | |
80 | return 0; | |
81 | } | |
82 | ||
83 | static umode_t rpi_is_visible(const void *_data, enum hwmon_sensor_types type, | |
84 | u32 attr, int channel) | |
85 | { | |
86 | return 0444; | |
87 | } | |
88 | ||
89 | static const u32 rpi_in_config[] = { | |
90 | HWMON_I_LCRIT_ALARM, | |
91 | 0 | |
92 | }; | |
93 | ||
94 | static const struct hwmon_channel_info rpi_in = { | |
95 | .type = hwmon_in, | |
96 | .config = rpi_in_config, | |
97 | }; | |
98 | ||
99 | static const struct hwmon_channel_info *rpi_info[] = { | |
100 | &rpi_in, | |
101 | NULL | |
102 | }; | |
103 | ||
104 | static const struct hwmon_ops rpi_hwmon_ops = { | |
105 | .is_visible = rpi_is_visible, | |
106 | .read = rpi_read, | |
107 | }; | |
108 | ||
109 | static const struct hwmon_chip_info rpi_chip_info = { | |
110 | .ops = &rpi_hwmon_ops, | |
111 | .info = rpi_info, | |
112 | }; | |
113 | ||
114 | static int rpi_hwmon_probe(struct platform_device *pdev) | |
115 | { | |
116 | struct device *dev = &pdev->dev; | |
117 | struct rpi_hwmon_data *data; | |
74d1e007 SW |
118 | |
119 | data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); | |
120 | if (!data) | |
121 | return -ENOMEM; | |
122 | ||
123 | /* Parent driver assure that firmware is correct */ | |
124 | data->fw = dev_get_drvdata(dev->parent); | |
125 | ||
74d1e007 SW |
126 | data->hwmon_dev = devm_hwmon_device_register_with_info(dev, "rpi_volt", |
127 | data, | |
128 | &rpi_chip_info, | |
129 | NULL); | |
130 | ||
131 | INIT_DELAYED_WORK(&data->get_values_poll_work, get_values_poll); | |
132 | platform_set_drvdata(pdev, data); | |
133 | ||
134 | if (!PTR_ERR_OR_ZERO(data->hwmon_dev)) | |
135 | schedule_delayed_work(&data->get_values_poll_work, 2 * HZ); | |
136 | ||
137 | return PTR_ERR_OR_ZERO(data->hwmon_dev); | |
138 | } | |
139 | ||
140 | static int rpi_hwmon_remove(struct platform_device *pdev) | |
141 | { | |
142 | struct rpi_hwmon_data *data = platform_get_drvdata(pdev); | |
143 | ||
144 | cancel_delayed_work_sync(&data->get_values_poll_work); | |
145 | ||
146 | return 0; | |
147 | } | |
148 | ||
149 | static struct platform_driver rpi_hwmon_driver = { | |
150 | .probe = rpi_hwmon_probe, | |
151 | .remove = rpi_hwmon_remove, | |
152 | .driver = { | |
153 | .name = "raspberrypi-hwmon", | |
154 | }, | |
155 | }; | |
156 | module_platform_driver(rpi_hwmon_driver); | |
157 | ||
158 | MODULE_AUTHOR("Stefan Wahren <[email protected]>"); | |
159 | MODULE_DESCRIPTION("Raspberry Pi voltage sensor driver"); | |
160 | MODULE_LICENSE("GPL v2"); | |
d07f05fb | 161 | MODULE_ALIAS("platform:raspberrypi-hwmon"); |