[linux.git] / scripts / Makefile.lib

# Backward compatibility
asflags-y  += $(EXTRA_AFLAGS)
ccflags-y  += $(EXTRA_CFLAGS)
cppflags-y += $(EXTRA_CPPFLAGS)
ldflags-y  += $(EXTRA_LDFLAGS)

#
# flags that take effect in sub directories
export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y)
export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y)

# Figure out what we need to build from the various variables
# ===========================================================================

# When an object is listed to be built compiled-in and modular,
# only build the compiled-in version

obj-m := $(filter-out $(obj-y),$(obj-m))

# Libraries are always collected in one lib file.
# Filter out objects already built-in

lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m)))


# Handle objects in subdirs
# ---------------------------------------------------------------------------
# o if we encounter foo/ in $(obj-y), replace it by foo/built-in.o
#   and add the directory to the list of dirs to descend into: $(subdir-y)
# o if we encounter foo/ in $(obj-m), remove it from $(obj-m) 
#   and add the directory to the list of dirs to descend into: $(subdir-m)

# Determine modorder.
# Unfortunately, we don't have information about ordering between -y
# and -m subdirs.  Just put -y's first.
modorder	:= $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m:.o=.ko))

__subdir-y	:= $(patsubst %/,%,$(filter %/, $(obj-y)))
subdir-y	+= $(__subdir-y)
__subdir-m	:= $(patsubst %/,%,$(filter %/, $(obj-m)))
subdir-m	+= $(__subdir-m)
obj-y		:= $(patsubst %/, %/built-in.o, $(obj-y))
obj-m		:= $(filter-out %/, $(obj-m))

# Subdirectories we need to descend into

subdir-ym	:= $(sort $(subdir-y) $(subdir-m))

# if $(foo-objs) exists, foo.o is a composite object 
multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
multi-used   := $(multi-used-y) $(multi-used-m)
single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m)))

# Build list of the parts of our composite objects, our composite
# objects depend on those (obviously)
multi-objs-y := $(foreach m, $(multi-used-y), $($(m:.o=-objs)) $($(m:.o=-y)))
multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)) $($(m:.o=-y)))
multi-objs   := $(multi-objs-y) $(multi-objs-m)

# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to
# tell kbuild to descend
subdir-obj-y := $(filter %/built-in.o, $(obj-y))

# $(obj-dirs) is a list of directories that contain object files
obj-dirs := $(dir $(multi-objs) $(subdir-obj-y))

# Replace multi-part objects by their individual parts, look at local dir only
real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y)
real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))

# Add subdir path

extra-y		:= $(addprefix $(obj)/,$(extra-y))
always		:= $(addprefix $(obj)/,$(always))
targets		:= $(addprefix $(obj)/,$(targets))
modorder	:= $(addprefix $(obj)/,$(modorder))
obj-y		:= $(addprefix $(obj)/,$(obj-y))
obj-m		:= $(addprefix $(obj)/,$(obj-m))
lib-y		:= $(addprefix $(obj)/,$(lib-y))
subdir-obj-y	:= $(addprefix $(obj)/,$(subdir-obj-y))
real-objs-y	:= $(addprefix $(obj)/,$(real-objs-y))
real-objs-m	:= $(addprefix $(obj)/,$(real-objs-m))
single-used-m	:= $(addprefix $(obj)/,$(single-used-m))
multi-used-y	:= $(addprefix $(obj)/,$(multi-used-y))
multi-used-m	:= $(addprefix $(obj)/,$(multi-used-m))
multi-objs-y	:= $(addprefix $(obj)/,$(multi-objs-y))
multi-objs-m	:= $(addprefix $(obj)/,$(multi-objs-m))
subdir-ym	:= $(addprefix $(obj)/,$(subdir-ym))
obj-dirs	:= $(addprefix $(obj)/,$(obj-dirs))

# These flags are needed for modversions and compiling, so we define them here
# already
# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will 
# end up in (or would, if it gets compiled in)
# Note: It's possible that one object gets potentially linked into more
#       than one module. In that case KBUILD_MODNAME will be set to foo_bar,
#       where foo and bar are the name of the modules.
name-fix = $(subst $(comma),_,$(subst -,_,$1))
basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))"
modname_flags  = $(if $(filter 1,$(words $(modname))),\
                 -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))")

orig_c_flags   = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \
                 $(ccflags-y) $(CFLAGS_$(basetarget).o)
_c_flags       = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
_a_flags       = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \
                 $(asflags-y) $(AFLAGS_$(basetarget).o)
_cpp_flags     = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))

#
# Enable gcov profiling flags for a file, directory or for all files depending
# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL
# (in this order)
#
ifeq ($(CONFIG_GCOV_KERNEL),y)
_c_flags += $(if $(patsubst n%,, \
		$(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \
		$(CFLAGS_GCOV))
endif

ifdef CONFIG_SYMBOL_PREFIX
_sym_flags = -DSYMBOL_PREFIX=$(patsubst "%",%,$(CONFIG_SYMBOL_PREFIX))
_cpp_flags += $(_sym_flags)
_a_flags += $(_sym_flags)
endif


# If building the kernel in a separate objtree expand all occurrences
# of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/').

ifeq ($(KBUILD_SRC),)
__c_flags	= $(_c_flags)
__a_flags	= $(_a_flags)
__cpp_flags     = $(_cpp_flags)
else

# -I$(obj) locates generated .h files
# $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files
#   and locates generated .h files
# FIXME: Replace both with specific CFLAGS* statements in the makefiles
__c_flags	= $(call addtree,-I$(obj)) $(call flags,_c_flags)
__a_flags	=                          $(call flags,_a_flags)
__cpp_flags     =                          $(call flags,_cpp_flags)
endif

c_flags        = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
		 $(__c_flags) $(modkern_cflags)                           \
		 -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags)

a_flags        = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
		 $(__a_flags) $(modkern_aflags)

cpp_flags      = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
		 $(__cpp_flags)

ld_flags       = $(LDFLAGS) $(ldflags-y)

# Finds the multi-part object the current object will be linked into
modname-multi = $(sort $(foreach m,$(multi-used),\
		$(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=))))

ifdef REGENERATE_PARSERS

# GPERF
# ---------------------------------------------------------------------------
quiet_cmd_gperf = GPERF $@
      cmd_gperf = gperf -t --output-file $@ -a -C -E -g -k 1,3,$$ -p -t $<

$(src)/%.hash.c_shipped: $(src)/%.gperf
	$(call cmd,gperf)

# LEX
# ---------------------------------------------------------------------------
LEX_PREFIX = $(if $(LEX_PREFIX_${baseprereq}),$(LEX_PREFIX_${baseprereq}),yy)

quiet_cmd_flex = LEX     $@
      cmd_flex = flex -o$@ -L -P $(LEX_PREFIX) $<

$(src)/%.lex.c_shipped: $(src)/%.l
	$(call cmd,flex)

# YACC
# ---------------------------------------------------------------------------
YACC_PREFIX = $(if $(YACC_PREFIX_${baseprereq}),$(YACC_PREFIX_${baseprereq}),yy)

quiet_cmd_bison = YACC    $@
      cmd_bison = bison -o$@ -t -l -p $(YACC_PREFIX) $<

$(src)/%.tab.c_shipped: $(src)/%.y
	$(call cmd,bison)

quiet_cmd_bison_h = YACC    $@
      cmd_bison_h = bison -o/dev/null --defines=$@ -t -l -p $(YACC_PREFIX) $<

$(src)/%.tab.h_shipped: $(src)/%.y
	$(call cmd,bison_h)

endif

# Shipped files
# ===========================================================================

quiet_cmd_shipped = SHIPPED $@
cmd_shipped = cat $< > $@

$(obj)/%: $(src)/%_shipped
	$(call cmd,shipped)

# Commands useful for building a boot image
# ===========================================================================
# 
#	Use as following:
#
#	target: source(s) FORCE
#		$(if_changed,ld/objcopy/gzip)
#
#	and add target to extra-y so that we know we have to
#	read in the saved command line

# Linking
# ---------------------------------------------------------------------------

quiet_cmd_ld = LD      $@
cmd_ld = $(LD) $(LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) \
	       $(filter-out FORCE,$^) -o $@ 

# Objcopy
# ---------------------------------------------------------------------------

quiet_cmd_objcopy = OBJCOPY $@
cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@

# Gzip
# ---------------------------------------------------------------------------

quiet_cmd_gzip = GZIP    $@
cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -n -f -9 > $@) || \
	(rm -f $@ ; false)

# DTC
# ---------------------------------------------------------------------------

# Generate an assembly file to wrap the output of the device tree compiler
quiet_cmd_dt_S_dtb= DTB    $@
cmd_dt_S_dtb=						\
(							\
	echo '\#include <asm-generic/vmlinux.lds.h>'; 	\
	echo '.section .dtb.init.rodata,"a"';		\
	echo '.balign STRUCT_ALIGNMENT';		\
	echo '.global __dtb_$(*F)_begin';		\
	echo '__dtb_$(*F)_begin:';			\
	echo '.incbin "$<" ';				\
	echo '__dtb_$(*F)_end:';			\
	echo '.global __dtb_$(*F)_end';			\
	echo '.balign STRUCT_ALIGNMENT'; 		\
) > $@

$(obj)/%.dtb.S: $(obj)/%.dtb
	$(call cmd,dt_S_dtb)

quiet_cmd_dtc = DTC     $@
cmd_dtc = $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 $(DTC_FLAGS) $<

# Bzip2
# ---------------------------------------------------------------------------

# Bzip2 and LZMA do not include size in file... so we have to fake that;
# append the size as a 32-bit littleendian number as gzip does.
size_append = printf $(shell						\
dec_size=0;								\
for F in $1; do								\
	fsize=$$(stat -c "%s" $$F);					\
	dec_size=$$(expr $$dec_size + $$fsize);				\
done;									\
printf "%08x\n" $$dec_size |						\
	sed 's/\(..\)/\1 /g' | {					\
		read ch0 ch1 ch2 ch3;					\
		for ch in $$ch3 $$ch2 $$ch1 $$ch0; do			\
			printf '%s%03o' '\\' $$((0x$$ch)); 		\
		done;							\
	}								\
)

quiet_cmd_bzip2 = BZIP2   $@
cmd_bzip2 = (cat $(filter-out FORCE,$^) | \
	bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
	(rm -f $@ ; false)

# Lzma
# ---------------------------------------------------------------------------

quiet_cmd_lzma = LZMA    $@
cmd_lzma = (cat $(filter-out FORCE,$^) | \
	lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
	(rm -f $@ ; false)

quiet_cmd_lzo = LZO     $@
cmd_lzo = (cat $(filter-out FORCE,$^) | \
	lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
	(rm -f $@ ; false)

# XZ
# ---------------------------------------------------------------------------
# Use xzkern to compress the kernel image and xzmisc to compress other things.
#
# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage
# of the kernel decompressor. A BCJ filter is used if it is available for
# the target architecture. xzkern also appends uncompressed size of the data
# using size_append. The .xz format has the size information available at
# the end of the file too, but it's in more complex format and it's good to
# avoid changing the part of the boot code that reads the uncompressed size.
# Note that the bytes added by size_append will make the xz tool think that
# the file is corrupt. This is expected.
#
# xzmisc doesn't use size_append, so it can be used to create normal .xz
# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very
# big dictionary would increase the memory usage too much in the multi-call
# decompression mode. A BCJ filter isn't used either.
quiet_cmd_xzkern = XZKERN  $@
cmd_xzkern = (cat $(filter-out FORCE,$^) | \
	sh $(srctree)/scripts/xz_wrap.sh && \
	$(call size_append, $(filter-out FORCE,$^))) > $@ || \
	(rm -f $@ ; false)

quiet_cmd_xzmisc = XZMISC  $@
cmd_xzmisc = (cat $(filter-out FORCE,$^) | \
	xz --check=crc32 --lzma2=dict=1MiB) > $@ || \
	(rm -f $@ ; false)

# misc stuff
# ---------------------------------------------------------------------------
quote:="
Commit	Line	Data
f77bf014 SR	1	# Backward compatibility
	2	asflags-y += $(EXTRA_AFLAGS)
	3	ccflags-y += $(EXTRA_CFLAGS)
	4	cppflags-y += $(EXTRA_CPPFLAGS)
	5	ldflags-y += $(EXTRA_LDFLAGS)
	6
720097d8 SR	7	#
	8	# flags that take effect in sub directories
	9	export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y)
	10	export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y)
	11
1da177e4 LT	12	# Figure out what we need to build from the various variables
	13	# ===========================================================================
	14
	15	# When an object is listed to be built compiled-in and modular,
	16	# only build the compiled-in version
	17
	18	obj-m := $(filter-out $(obj-y),$(obj-m))
	19
	20	# Libraries are always collected in one lib file.
	21	# Filter out objects already built-in
	22
	23	lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m)))
	24
	25
	26	# Handle objects in subdirs
	27	# ---------------------------------------------------------------------------
	28	# o if we encounter foo/ in $(obj-y), replace it by foo/built-in.o
	29	# and add the directory to the list of dirs to descend into: $(subdir-y)
	30	# o if we encounter foo/ in $(obj-m), remove it from $(obj-m)
	31	# and add the directory to the list of dirs to descend into: $(subdir-m)
	32
551559e1 TH	33	# Determine modorder.
	34	# Unfortunately, we don't have information about ordering between -y
	35	# and -m subdirs. Just put -y's first.
	36	modorder := $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m:.o=.ko))
	37
1da177e4 LT	38	__subdir-y := $(patsubst %/,%,$(filter %/, $(obj-y)))
	39	subdir-y += $(__subdir-y)
	40	__subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m)))
	41	subdir-m += $(__subdir-m)
	42	obj-y := $(patsubst %/, %/built-in.o, $(obj-y))
	43	obj-m := $(filter-out %/, $(obj-m))
	44
	45	# Subdirectories we need to descend into
	46
	47	subdir-ym := $(sort $(subdir-y) $(subdir-m))
	48
	49	# if $(foo-objs) exists, foo.o is a composite object
	50	multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
	51	multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
	52	multi-used := $(multi-used-y) $(multi-used-m)
	53	single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m)))
	54
	55	# Build list of the parts of our composite objects, our composite
	56	# objects depend on those (obviously)
	57	multi-objs-y := $(foreach m, $(multi-used-y), $($(m:.o=-objs)) $($(m:.o=-y)))
	58	multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)) $($(m:.o=-y)))
	59	multi-objs := $(multi-objs-y) $(multi-objs-m)
	60
f5fb9765 SR	61	# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to
	62	# tell kbuild to descend
	63	subdir-obj-y := $(filter %/built-in.o, $(obj-y))
1da177e4 LT	64
	65	# $(obj-dirs) is a list of directories that contain object files
	66	obj-dirs := $(dir $(multi-objs) $(subdir-obj-y))
	67
	68	# Replace multi-part objects by their individual parts, look at local dir only
	69	real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y)
	70	real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
	71
	72	# Add subdir path
	73
	74	extra-y := $(addprefix $(obj)/,$(extra-y))
	75	always := $(addprefix $(obj)/,$(always))
	76	targets := $(addprefix $(obj)/,$(targets))
551559e1	77	modorder := $(addprefix $(obj)/,$(modorder))
1da177e4 LT	78	obj-y := $(addprefix $(obj)/,$(obj-y))
	79	obj-m := $(addprefix $(obj)/,$(obj-m))
	80	lib-y := $(addprefix $(obj)/,$(lib-y))
	81	subdir-obj-y := $(addprefix $(obj)/,$(subdir-obj-y))
	82	real-objs-y := $(addprefix $(obj)/,$(real-objs-y))
	83	real-objs-m := $(addprefix $(obj)/,$(real-objs-m))
	84	single-used-m := $(addprefix $(obj)/,$(single-used-m))
	85	multi-used-y := $(addprefix $(obj)/,$(multi-used-y))
	86	multi-used-m := $(addprefix $(obj)/,$(multi-used-m))
	87	multi-objs-y := $(addprefix $(obj)/,$(multi-objs-y))
	88	multi-objs-m := $(addprefix $(obj)/,$(multi-objs-m))
	89	subdir-ym := $(addprefix $(obj)/,$(subdir-ym))
	90	obj-dirs := $(addprefix $(obj)/,$(obj-dirs))
	91
1da177e4 LT	92	# These flags are needed for modversions and compiling, so we define them here
	93	# already
	94	# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will
	95	# end up in (or would, if it gets compiled in)
	96	# Note: It's possible that one object gets potentially linked into more
	97	# than one module. In that case KBUILD_MODNAME will be set to foo_bar,
	98	# where foo and bar are the name of the modules.
f83b5e32	99	name-fix = $(subst $(comma),_,$(subst -,_,$1))
5e8d780d	100	basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))"
f83b5e32 UR	101	modname_flags = $(if $(filter 1,$(words $(modname))),\
f83b5e32 UR	102	-D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))")
1da177e4	103
720097d8	104	orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \
d8672b40	105	$(ccflags-y) $(CFLAGS_$(basetarget).o)
656ee82c	106	_c_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
720097d8	107	_a_flags = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \
d8672b40	108	$(asflags-y) $(AFLAGS_$(basetarget).o)
f77bf014	109	_cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))
1da177e4	110
2521f2c2 PO	111	#
	112	# Enable gcov profiling flags for a file, directory or for all files depending
	113	# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL
	114	# (in this order)
	115	#
	116	ifeq ($(CONFIG_GCOV_KERNEL),y)
	117	_c_flags += $(if $(patsubst n%,, \
	118	$(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \
	119	$(CFLAGS_GCOV))
	120	endif
	121
9e1b9b80	122	ifdef CONFIG_SYMBOL_PREFIX
d63f6d1b MF	123	_sym_flags = -DSYMBOL_PREFIX=$(patsubst "%",%,$(CONFIG_SYMBOL_PREFIX))
	124	_cpp_flags += $(_sym_flags)
	125	_a_flags += $(_sym_flags)
9e1b9b80 AJ	126	endif
	127
	128
1da177e4 LT	129	# If building the kernel in a separate objtree expand all occurrences
	130	# of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/').
	131
	132	ifeq ($(KBUILD_SRC),)
	133	__c_flags = $(_c_flags)
	134	__a_flags = $(_a_flags)
	135	__cpp_flags = $(_cpp_flags)
	136	else
	137
1da177e4 LT	138	# -I$(obj) locates generated .h files
	139	# $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files
	140	# and locates generated .h files
	141	# FIXME: Replace both with specific CFLAGS* statements in the makefiles
	142	__c_flags = $(call addtree,-I$(obj)) $(call flags,_c_flags)
	143	__a_flags = $(call flags,_a_flags)
	144	__cpp_flags = $(call flags,_cpp_flags)
	145	endif
	146
d8672b40 SR	147	c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
d8672b40 SR	148	$(__c_flags) $(modkern_cflags) \
52159d98	149	-D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags)
1da177e4	150
d8672b40	151	a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
1da177e4 LT	152	$(__a_flags) $(modkern_aflags)
1da177e4 LT	153
d8672b40 SR	154	cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
d8672b40 SR	155	$(__cpp_flags)
1da177e4	156
f77bf014	157	ld_flags = $(LDFLAGS) $(ldflags-y)
1da177e4 LT	158
	159	# Finds the multi-part object the current object will be linked into
	160	modname-multi = $(sort $(foreach m,$(multi-used),\
	161	$(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=))))
	162
7373f4f8 AL	163	ifdef REGENERATE_PARSERS
	164
	165	# GPERF
	166	# ---------------------------------------------------------------------------
	167	quiet_cmd_gperf = GPERF $@
	168	cmd_gperf = gperf -t --output-file $@ -a -C -E -g -k 1,3,$$ -p -t $<
	169
	170	$(src)/%.hash.c_shipped: $(src)/%.gperf
	171	$(call cmd,gperf)
	172
	173	# LEX
	174	# ---------------------------------------------------------------------------
	175	LEX_PREFIX = $(if $(LEX_PREFIX_${baseprereq}),$(LEX_PREFIX_${baseprereq}),yy)
	176
	177	quiet_cmd_flex = LEX $@
	178	cmd_flex = flex -o$@ -L -P $(LEX_PREFIX) $<
	179
	180	$(src)/%.lex.c_shipped: $(src)/%.l
	181	$(call cmd,flex)
	182
	183	# YACC
	184	# ---------------------------------------------------------------------------
	185	YACC_PREFIX = $(if $(YACC_PREFIX_${baseprereq}),$(YACC_PREFIX_${baseprereq}),yy)
	186
	187	quiet_cmd_bison = YACC $@
	188	cmd_bison = bison -o$@ -t -l -p $(YACC_PREFIX) $<
	189
	190	$(src)/%.tab.c_shipped: $(src)/%.y
	191	$(call cmd,bison)
	192
	193	quiet_cmd_bison_h = YACC $@
	194	cmd_bison_h = bison -o/dev/null --defines=$@ -t -l -p $(YACC_PREFIX) $<
	195
	196	$(src)/%.tab.h_shipped: $(src)/%.y
	197	$(call cmd,bison_h)
	198
	199	endif
	200
1da177e4 LT	201	# Shipped files
	202	# ===========================================================================
	203
	204	quiet_cmd_shipped = SHIPPED $@
	205	cmd_shipped = cat $< > $@
	206
991d76c9	207	$(obj)/%: $(src)/%_shipped
1da177e4 LT	208	$(call cmd,shipped)
	209
	210	# Commands useful for building a boot image
	211	# ===========================================================================
	212	#
	213	# Use as following:
	214	#
	215	# target: source(s) FORCE
	216	# $(if_changed,ld/objcopy/gzip)
	217	#
836caba7	218	# and add target to extra-y so that we know we have to
1da177e4 LT	219	# read in the saved command line
	220
	221	# Linking
	222	# ---------------------------------------------------------------------------
	223
	224	quiet_cmd_ld = LD $@
f77bf014	225	cmd_ld = $(LD) $(LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) \
1da177e4 LT	226	$(filter-out FORCE,$^) -o $@
	227
	228	# Objcopy
	229	# ---------------------------------------------------------------------------
	230
	231	quiet_cmd_objcopy = OBJCOPY $@
	232	cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
	233
	234	# Gzip
	235	# ---------------------------------------------------------------------------
	236
	237	quiet_cmd_gzip = GZIP $@
6ae9ecb8	238	cmd_gzip = (cat $(filter-out FORCE,$^) \| gzip -n -f -9 > $@) \|\| \
d3dd3b5a	239	(rm -f $@ ; false)
1da177e4	240
aab94339 DB	241	# DTC
	242	# ---------------------------------------------------------------------------
	243
	244	# Generate an assembly file to wrap the output of the device tree compiler
	245	quiet_cmd_dt_S_dtb= DTB $@
	246	cmd_dt_S_dtb= \
	247	( \
	248	echo '\#include <asm-generic/vmlinux.lds.h>'; \
	249	echo '.section .dtb.init.rodata,"a"'; \
	250	echo '.balign STRUCT_ALIGNMENT'; \
	251	echo '.global __dtb_$(*F)_begin'; \
	252	echo '__dtb_$(*F)_begin:'; \
	253	echo '.incbin "$<" '; \
	254	echo '__dtb_$(*F)_end:'; \
	255	echo '.global __dtb_$(*F)_end'; \
	256	echo '.balign STRUCT_ALIGNMENT'; \
	257	) > $@
	258
	259	$(obj)/%.dtb.S: $(obj)/%.dtb
	260	$(call cmd,dt_S_dtb)
	261
	262	quiet_cmd_dtc = DTC $@
	263	cmd_dtc = $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 $(DTC_FLAGS) $<
1da177e4	264
bc22c17e AK	265	# Bzip2
	266	# ---------------------------------------------------------------------------
	267
d3dd3b5a PA	268	# Bzip2 and LZMA do not include size in file... so we have to fake that;
d3dd3b5a PA	269	# append the size as a 32-bit littleendian number as gzip does.
4a2ff67c	270	size_append = printf $(shell \
d3dd3b5a PA	271	dec_size=0; \
	272	for F in $1; do \
	273	fsize=$$(stat -c "%s" $$F); \
	274	dec_size=$$(expr $$dec_size + $$fsize); \
	275	done; \
1373411a JN	276	printf "%08x\n" $$dec_size \| \
	277	sed 's/\(..\)/\1 /g' \| { \
	278	read ch0 ch1 ch2 ch3; \
	279	for ch in $$ch3 $$ch2 $$ch1 $$ch0; do \
	280	printf '%s%03o' '\\' $$((0x$$ch)); \
	281	done; \
	282	} \
d3dd3b5a PA	283	)
	284
	285	quiet_cmd_bzip2 = BZIP2 $@
	286	cmd_bzip2 = (cat $(filter-out FORCE,$^) \| \
	287	bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ \|\| \
	288	(rm -f $@ ; false)
bc22c17e AK	289
	290	# Lzma
	291	# ---------------------------------------------------------------------------
	292
	293	quiet_cmd_lzma = LZMA $@
d3dd3b5a PA	294	cmd_lzma = (cat $(filter-out FORCE,$^) \| \
	295	lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ \|\| \
	296	(rm -f $@ ; false)
7dd65feb	297
2d74b2c6	298	quiet_cmd_lzo = LZO $@
7dd65feb AT	299	cmd_lzo = (cat $(filter-out FORCE,$^) \| \
	300	lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ \|\| \
	301	(rm -f $@ ; false)
d61931d8	302
24fa0402 LC	303	# XZ
	304	# ---------------------------------------------------------------------------
	305	# Use xzkern to compress the kernel image and xzmisc to compress other things.
	306	#
	307	# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage
	308	# of the kernel decompressor. A BCJ filter is used if it is available for
	309	# the target architecture. xzkern also appends uncompressed size of the data
	310	# using size_append. The .xz format has the size information available at
	311	# the end of the file too, but it's in more complex format and it's good to
	312	# avoid changing the part of the boot code that reads the uncompressed size.
	313	# Note that the bytes added by size_append will make the xz tool think that
	314	# the file is corrupt. This is expected.
	315	#
	316	# xzmisc doesn't use size_append, so it can be used to create normal .xz
	317	# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very
	318	# big dictionary would increase the memory usage too much in the multi-call
	319	# decompression mode. A BCJ filter isn't used either.
	320	quiet_cmd_xzkern = XZKERN $@
	321	cmd_xzkern = (cat $(filter-out FORCE,$^) \| \
	322	sh $(srctree)/scripts/xz_wrap.sh && \
	323	$(call size_append, $(filter-out FORCE,$^))) > $@ \|\| \
	324	(rm -f $@ ; false)
	325
	326	quiet_cmd_xzmisc = XZMISC $@
	327	cmd_xzmisc = (cat $(filter-out FORCE,$^) \| \
	328	xz --check=crc32 --lzma2=dict=1MiB) > $@ \|\| \
	329	(rm -f $@ ; false)
	330
d61931d8 BP	331	# misc stuff
	332	# ---------------------------------------------------------------------------
	333	quote:="