]>
Commit | Line | Data |
---|---|---|
0efba16c | 1 | /* |
9ef8c877 | 2 | * lp5523.c - LP5523, LP55231 LED Driver |
0efba16c SO |
3 | * |
4 | * Copyright (C) 2010 Nokia Corporation | |
a2387cb9 | 5 | * Copyright (C) 2012 Texas Instruments |
0efba16c SO |
6 | * |
7 | * Contact: Samu Onkalo <[email protected]> | |
a2387cb9 | 8 | * Milo(Woogyom) Kim <[email protected]> |
0efba16c SO |
9 | * |
10 | * This program is free software; you can redistribute it and/or | |
11 | * modify it under the terms of the GNU General Public License | |
12 | * version 2 as published by the Free Software Foundation. | |
13 | * | |
14 | * This program is distributed in the hope that it will be useful, but | |
15 | * WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
17 | * General Public License for more details. | |
18 | * | |
19 | * You should have received a copy of the GNU General Public License | |
20 | * along with this program; if not, write to the Free Software | |
21 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | |
22 | * 02110-1301 USA | |
23 | */ | |
24 | ||
0efba16c | 25 | #include <linux/delay.h> |
79bcc10b MWK |
26 | #include <linux/firmware.h> |
27 | #include <linux/i2c.h> | |
0efba16c | 28 | #include <linux/leds.h> |
79bcc10b MWK |
29 | #include <linux/module.h> |
30 | #include <linux/mutex.h> | |
c68f46dd | 31 | #include <linux/of.h> |
6a0c9a47 | 32 | #include <linux/platform_data/leds-lp55xx.h> |
79bcc10b | 33 | #include <linux/slab.h> |
6a0c9a47 MWK |
34 | |
35 | #include "leds-lp55xx-common.h" | |
0efba16c | 36 | |
bfb18d82 PM |
37 | #define LP5523_PROGRAM_LENGTH 32 /* bytes */ |
38 | /* Memory is used like this: | |
39 | 0x00 engine 1 program | |
40 | 0x10 engine 2 program | |
41 | 0x20 engine 3 program | |
42 | 0x30 engine 1 muxing info | |
43 | 0x40 engine 2 muxing info | |
44 | 0x50 engine 3 muxing info | |
45 | */ | |
12f022d2 MWK |
46 | #define LP5523_MAX_LEDS 9 |
47 | ||
48 | /* Registers */ | |
0efba16c SO |
49 | #define LP5523_REG_ENABLE 0x00 |
50 | #define LP5523_REG_OP_MODE 0x01 | |
0efba16c SO |
51 | #define LP5523_REG_ENABLE_LEDS_MSB 0x04 |
52 | #define LP5523_REG_ENABLE_LEDS_LSB 0x05 | |
52da81ea | 53 | #define LP5523_REG_LED_CTRL_BASE 0x06 |
0efba16c SO |
54 | #define LP5523_REG_LED_PWM_BASE 0x16 |
55 | #define LP5523_REG_LED_CURRENT_BASE 0x26 | |
56 | #define LP5523_REG_CONFIG 0x36 | |
12f022d2 MWK |
57 | #define LP5523_REG_STATUS 0x3A |
58 | #define LP5523_REG_RESET 0x3D | |
0efba16c SO |
59 | #define LP5523_REG_LED_TEST_CTRL 0x41 |
60 | #define LP5523_REG_LED_TEST_ADC 0x42 | |
52da81ea | 61 | #define LP5523_REG_MASTER_FADER_BASE 0x48 |
22460438 MK |
62 | #define LP5523_REG_CH1_PROG_START 0x4C |
63 | #define LP5523_REG_CH2_PROG_START 0x4D | |
64 | #define LP5523_REG_CH3_PROG_START 0x4E | |
12f022d2 | 65 | #define LP5523_REG_PROG_PAGE_SEL 0x4F |
0efba16c SO |
66 | #define LP5523_REG_PROG_MEM 0x50 |
67 | ||
12f022d2 | 68 | /* Bit description in registers */ |
0efba16c SO |
69 | #define LP5523_ENABLE 0x40 |
70 | #define LP5523_AUTO_INC 0x40 | |
71 | #define LP5523_PWR_SAVE 0x20 | |
72 | #define LP5523_PWM_PWR_SAVE 0x04 | |
0efba16c | 73 | #define LP5523_CP_AUTO 0x18 |
0efba16c | 74 | #define LP5523_AUTO_CLK 0x02 |
12f022d2 | 75 | |
0efba16c SO |
76 | #define LP5523_EN_LEDTEST 0x80 |
77 | #define LP5523_LEDTEST_DONE 0x80 | |
48068d5d | 78 | #define LP5523_RESET 0xFF |
0efba16c | 79 | #define LP5523_ADC_SHORTCIRC_LIM 80 |
0efba16c | 80 | #define LP5523_EXT_CLK_USED 0x08 |
22460438 | 81 | #define LP5523_ENG_STATUS_MASK 0x07 |
0efba16c | 82 | |
52da81ea TK |
83 | #define LP5523_FADER_MAPPING_MASK 0xC0 |
84 | #define LP5523_FADER_MAPPING_SHIFT 6 | |
85 | ||
db6eaf83 MWK |
86 | /* Memory Page Selection */ |
87 | #define LP5523_PAGE_ENG1 0 | |
88 | #define LP5523_PAGE_ENG2 1 | |
89 | #define LP5523_PAGE_ENG3 2 | |
45e611bf MK |
90 | #define LP5523_PAGE_MUX1 3 |
91 | #define LP5523_PAGE_MUX2 4 | |
92 | #define LP5523_PAGE_MUX3 5 | |
db6eaf83 MWK |
93 | |
94 | /* Program Memory Operations */ | |
95 | #define LP5523_MODE_ENG1_M 0x30 /* Operation Mode Register */ | |
96 | #define LP5523_MODE_ENG2_M 0x0C | |
97 | #define LP5523_MODE_ENG3_M 0x03 | |
98 | #define LP5523_LOAD_ENG1 0x10 | |
99 | #define LP5523_LOAD_ENG2 0x04 | |
100 | #define LP5523_LOAD_ENG3 0x01 | |
101 | ||
102 | #define LP5523_ENG1_IS_LOADING(mode) \ | |
103 | ((mode & LP5523_MODE_ENG1_M) == LP5523_LOAD_ENG1) | |
104 | #define LP5523_ENG2_IS_LOADING(mode) \ | |
105 | ((mode & LP5523_MODE_ENG2_M) == LP5523_LOAD_ENG2) | |
106 | #define LP5523_ENG3_IS_LOADING(mode) \ | |
107 | ((mode & LP5523_MODE_ENG3_M) == LP5523_LOAD_ENG3) | |
108 | ||
109 | #define LP5523_EXEC_ENG1_M 0x30 /* Enable Register */ | |
110 | #define LP5523_EXEC_ENG2_M 0x0C | |
111 | #define LP5523_EXEC_ENG3_M 0x03 | |
112 | #define LP5523_EXEC_M 0x3F | |
113 | #define LP5523_RUN_ENG1 0x20 | |
114 | #define LP5523_RUN_ENG2 0x08 | |
115 | #define LP5523_RUN_ENG3 0x02 | |
116 | ||
45e611bf MK |
117 | #define LED_ACTIVE(mux, led) (!!(mux & (0x0001 << led))) |
118 | ||
27d7704e KM |
119 | enum lp5523_chip_id { |
120 | LP5523, | |
121 | LP55231, | |
122 | }; | |
123 | ||
22460438 MK |
124 | static int lp5523_init_program_engine(struct lp55xx_chip *chip); |
125 | ||
db6eaf83 MWK |
126 | static inline void lp5523_wait_opmode_done(void) |
127 | { | |
128 | usleep_range(1000, 2000); | |
129 | } | |
130 | ||
a96bfa13 MWK |
131 | static void lp5523_set_led_current(struct lp55xx_led *led, u8 led_current) |
132 | { | |
133 | led->led_current = led_current; | |
134 | lp55xx_write(led->chip, LP5523_REG_LED_CURRENT_BASE + led->chan_nr, | |
135 | led_current); | |
136 | } | |
137 | ||
ffbdccdb | 138 | static int lp5523_post_init_device(struct lp55xx_chip *chip) |
0efba16c | 139 | { |
ffbdccdb | 140 | int ret; |
0efba16c | 141 | |
ffbdccdb | 142 | ret = lp55xx_write(chip, LP5523_REG_ENABLE, LP5523_ENABLE); |
632418bf MWK |
143 | if (ret) |
144 | return ret; | |
0efba16c | 145 | |
2e4840ed SO |
146 | /* Chip startup time is 500 us, 1 - 2 ms gives some margin */ |
147 | usleep_range(1000, 2000); | |
0efba16c | 148 | |
ffbdccdb | 149 | ret = lp55xx_write(chip, LP5523_REG_CONFIG, |
0efba16c SO |
150 | LP5523_AUTO_INC | LP5523_PWR_SAVE | |
151 | LP5523_CP_AUTO | LP5523_AUTO_CLK | | |
152 | LP5523_PWM_PWR_SAVE); | |
632418bf MWK |
153 | if (ret) |
154 | return ret; | |
0efba16c SO |
155 | |
156 | /* turn on all leds */ | |
ffbdccdb | 157 | ret = lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_MSB, 0x01); |
632418bf | 158 | if (ret) |
1b21ec5a JH |
159 | return ret; |
160 | ||
22460438 MK |
161 | ret = lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_LSB, 0xff); |
162 | if (ret) | |
163 | return ret; | |
164 | ||
165 | return lp5523_init_program_engine(chip); | |
0efba16c SO |
166 | } |
167 | ||
db6eaf83 | 168 | static void lp5523_load_engine(struct lp55xx_chip *chip) |
0efba16c | 169 | { |
db6eaf83 | 170 | enum lp55xx_engine_index idx = chip->engine_idx; |
4d1707c1 | 171 | static const u8 mask[] = { |
db6eaf83 MWK |
172 | [LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M, |
173 | [LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M, | |
174 | [LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M, | |
175 | }; | |
176 | ||
4d1707c1 | 177 | static const u8 val[] = { |
db6eaf83 MWK |
178 | [LP55XX_ENGINE_1] = LP5523_LOAD_ENG1, |
179 | [LP55XX_ENGINE_2] = LP5523_LOAD_ENG2, | |
180 | [LP55XX_ENGINE_3] = LP5523_LOAD_ENG3, | |
181 | }; | |
182 | ||
b9e1730b MK |
183 | lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], val[idx]); |
184 | ||
185 | lp5523_wait_opmode_done(); | |
186 | } | |
187 | ||
188 | static void lp5523_load_engine_and_select_page(struct lp55xx_chip *chip) | |
189 | { | |
190 | enum lp55xx_engine_index idx = chip->engine_idx; | |
4d1707c1 | 191 | static const u8 page_sel[] = { |
db6eaf83 MWK |
192 | [LP55XX_ENGINE_1] = LP5523_PAGE_ENG1, |
193 | [LP55XX_ENGINE_2] = LP5523_PAGE_ENG2, | |
194 | [LP55XX_ENGINE_3] = LP5523_PAGE_ENG3, | |
195 | }; | |
196 | ||
b9e1730b | 197 | lp5523_load_engine(chip); |
db6eaf83 MWK |
198 | |
199 | lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, page_sel[idx]); | |
0efba16c SO |
200 | } |
201 | ||
28c9266b | 202 | static void lp5523_stop_all_engines(struct lp55xx_chip *chip) |
0efba16c | 203 | { |
db6eaf83 MWK |
204 | lp55xx_write(chip, LP5523_REG_OP_MODE, 0); |
205 | lp5523_wait_opmode_done(); | |
206 | } | |
0efba16c | 207 | |
28c9266b MK |
208 | static void lp5523_stop_engine(struct lp55xx_chip *chip) |
209 | { | |
210 | enum lp55xx_engine_index idx = chip->engine_idx; | |
4d1707c1 | 211 | static const u8 mask[] = { |
28c9266b MK |
212 | [LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M, |
213 | [LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M, | |
214 | [LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M, | |
215 | }; | |
216 | ||
217 | lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], 0); | |
218 | ||
219 | lp5523_wait_opmode_done(); | |
220 | } | |
221 | ||
db6eaf83 MWK |
222 | static void lp5523_turn_off_channels(struct lp55xx_chip *chip) |
223 | { | |
224 | int i; | |
0efba16c | 225 | |
db6eaf83 MWK |
226 | for (i = 0; i < LP5523_MAX_LEDS; i++) |
227 | lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0); | |
0efba16c SO |
228 | } |
229 | ||
db6eaf83 | 230 | static void lp5523_run_engine(struct lp55xx_chip *chip, bool start) |
0efba16c | 231 | { |
db6eaf83 MWK |
232 | int ret; |
233 | u8 mode; | |
234 | u8 exec; | |
0efba16c | 235 | |
db6eaf83 MWK |
236 | /* stop engine */ |
237 | if (!start) { | |
238 | lp5523_stop_engine(chip); | |
239 | lp5523_turn_off_channels(chip); | |
240 | return; | |
241 | } | |
0efba16c | 242 | |
db6eaf83 MWK |
243 | /* |
244 | * To run the engine, | |
245 | * operation mode and enable register should updated at the same time | |
246 | */ | |
0efba16c | 247 | |
db6eaf83 MWK |
248 | ret = lp55xx_read(chip, LP5523_REG_OP_MODE, &mode); |
249 | if (ret) | |
250 | return; | |
0efba16c | 251 | |
db6eaf83 MWK |
252 | ret = lp55xx_read(chip, LP5523_REG_ENABLE, &exec); |
253 | if (ret) | |
254 | return; | |
0efba16c | 255 | |
db6eaf83 MWK |
256 | /* change operation mode to RUN only when each engine is loading */ |
257 | if (LP5523_ENG1_IS_LOADING(mode)) { | |
258 | mode = (mode & ~LP5523_MODE_ENG1_M) | LP5523_RUN_ENG1; | |
259 | exec = (exec & ~LP5523_EXEC_ENG1_M) | LP5523_RUN_ENG1; | |
260 | } | |
0efba16c | 261 | |
db6eaf83 MWK |
262 | if (LP5523_ENG2_IS_LOADING(mode)) { |
263 | mode = (mode & ~LP5523_MODE_ENG2_M) | LP5523_RUN_ENG2; | |
264 | exec = (exec & ~LP5523_EXEC_ENG2_M) | LP5523_RUN_ENG2; | |
265 | } | |
0efba16c | 266 | |
db6eaf83 MWK |
267 | if (LP5523_ENG3_IS_LOADING(mode)) { |
268 | mode = (mode & ~LP5523_MODE_ENG3_M) | LP5523_RUN_ENG3; | |
269 | exec = (exec & ~LP5523_EXEC_ENG3_M) | LP5523_RUN_ENG3; | |
270 | } | |
271 | ||
272 | lp55xx_write(chip, LP5523_REG_OP_MODE, mode); | |
273 | lp5523_wait_opmode_done(); | |
274 | ||
275 | lp55xx_update_bits(chip, LP5523_REG_ENABLE, LP5523_EXEC_M, exec); | |
0efba16c SO |
276 | } |
277 | ||
22460438 MK |
278 | static int lp5523_init_program_engine(struct lp55xx_chip *chip) |
279 | { | |
280 | int i; | |
281 | int j; | |
282 | int ret; | |
283 | u8 status; | |
284 | /* one pattern per engine setting LED MUX start and stop addresses */ | |
285 | static const u8 pattern[][LP5523_PROGRAM_LENGTH] = { | |
286 | { 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0}, | |
287 | { 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0}, | |
288 | { 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0}, | |
289 | }; | |
290 | ||
291 | /* hardcode 32 bytes of memory for each engine from program memory */ | |
292 | ret = lp55xx_write(chip, LP5523_REG_CH1_PROG_START, 0x00); | |
293 | if (ret) | |
294 | return ret; | |
295 | ||
296 | ret = lp55xx_write(chip, LP5523_REG_CH2_PROG_START, 0x10); | |
297 | if (ret) | |
298 | return ret; | |
299 | ||
300 | ret = lp55xx_write(chip, LP5523_REG_CH3_PROG_START, 0x20); | |
301 | if (ret) | |
302 | return ret; | |
303 | ||
304 | /* write LED MUX address space for each engine */ | |
305 | for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) { | |
306 | chip->engine_idx = i; | |
307 | lp5523_load_engine_and_select_page(chip); | |
308 | ||
309 | for (j = 0; j < LP5523_PROGRAM_LENGTH; j++) { | |
310 | ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + j, | |
311 | pattern[i - 1][j]); | |
312 | if (ret) | |
313 | goto out; | |
314 | } | |
315 | } | |
316 | ||
317 | lp5523_run_engine(chip, true); | |
318 | ||
319 | /* Let the programs run for couple of ms and check the engine status */ | |
320 | usleep_range(3000, 6000); | |
248b5701 KL |
321 | ret = lp55xx_read(chip, LP5523_REG_STATUS, &status); |
322 | if (ret) | |
323 | return ret; | |
22460438 MK |
324 | status &= LP5523_ENG_STATUS_MASK; |
325 | ||
326 | if (status != LP5523_ENG_STATUS_MASK) { | |
327 | dev_err(&chip->cl->dev, | |
f2ea85d7 | 328 | "could not configure LED engine, status = 0x%.2x\n", |
22460438 MK |
329 | status); |
330 | ret = -1; | |
331 | } | |
332 | ||
333 | out: | |
28c9266b | 334 | lp5523_stop_all_engines(chip); |
22460438 MK |
335 | return ret; |
336 | } | |
337 | ||
db6eaf83 MWK |
338 | static int lp5523_update_program_memory(struct lp55xx_chip *chip, |
339 | const u8 *data, size_t size) | |
0efba16c | 340 | { |
db6eaf83 MWK |
341 | u8 pattern[LP5523_PROGRAM_LENGTH] = {0}; |
342 | unsigned cmd; | |
343 | char c[3]; | |
db6eaf83 | 344 | int nrchars; |
db6eaf83 | 345 | int ret; |
2f733cad MK |
346 | int offset = 0; |
347 | int i = 0; | |
0efba16c | 348 | |
db6eaf83 MWK |
349 | while ((offset < size - 1) && (i < LP5523_PROGRAM_LENGTH)) { |
350 | /* separate sscanfs because length is working only for %s */ | |
351 | ret = sscanf(data + offset, "%2s%n ", c, &nrchars); | |
352 | if (ret != 1) | |
353 | goto err; | |
0efba16c | 354 | |
db6eaf83 MWK |
355 | ret = sscanf(c, "%2x", &cmd); |
356 | if (ret != 1) | |
357 | goto err; | |
0efba16c | 358 | |
db6eaf83 MWK |
359 | pattern[i] = (u8)cmd; |
360 | offset += nrchars; | |
361 | i++; | |
362 | } | |
0efba16c | 363 | |
db6eaf83 MWK |
364 | /* Each instruction is 16bit long. Check that length is even */ |
365 | if (i % 2) | |
366 | goto err; | |
0efba16c | 367 | |
2f733cad | 368 | for (i = 0; i < LP5523_PROGRAM_LENGTH; i++) { |
45e611bf | 369 | ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + i, pattern[i]); |
e70988d1 | 370 | if (ret) |
45e611bf | 371 | return -EINVAL; |
45e611bf MK |
372 | } |
373 | ||
45e611bf | 374 | return size; |
0efba16c | 375 | |
db6eaf83 MWK |
376 | err: |
377 | dev_err(&chip->cl->dev, "wrong pattern format\n"); | |
378 | return -EINVAL; | |
0efba16c | 379 | } |
0efba16c | 380 | |
db6eaf83 | 381 | static void lp5523_firmware_loaded(struct lp55xx_chip *chip) |
0efba16c | 382 | { |
db6eaf83 | 383 | const struct firmware *fw = chip->fw; |
fbac0812 | 384 | |
db6eaf83 MWK |
385 | if (fw->size > LP5523_PROGRAM_LENGTH) { |
386 | dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n", | |
387 | fw->size); | |
388 | return; | |
389 | } | |
0efba16c | 390 | |
db6eaf83 | 391 | /* |
d1b7c934 | 392 | * Program memory sequence |
db6eaf83 MWK |
393 | * 1) set engine mode to "LOAD" |
394 | * 2) write firmware data into program memory | |
395 | */ | |
0efba16c | 396 | |
b9e1730b | 397 | lp5523_load_engine_and_select_page(chip); |
db6eaf83 | 398 | lp5523_update_program_memory(chip, fw->data, fw->size); |
0efba16c | 399 | } |
0efba16c | 400 | |
45e611bf MK |
401 | static ssize_t show_engine_mode(struct device *dev, |
402 | struct device_attribute *attr, | |
403 | char *buf, int nr) | |
404 | { | |
405 | struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
406 | struct lp55xx_chip *chip = led->chip; | |
407 | enum lp55xx_engine_mode mode = chip->engines[nr - 1].mode; | |
408 | ||
409 | switch (mode) { | |
410 | case LP55XX_ENGINE_RUN: | |
411 | return sprintf(buf, "run\n"); | |
412 | case LP55XX_ENGINE_LOAD: | |
413 | return sprintf(buf, "load\n"); | |
414 | case LP55XX_ENGINE_DISABLED: | |
415 | default: | |
416 | return sprintf(buf, "disabled\n"); | |
417 | } | |
418 | } | |
419 | show_mode(1) | |
420 | show_mode(2) | |
421 | show_mode(3) | |
422 | ||
423 | static ssize_t store_engine_mode(struct device *dev, | |
424 | struct device_attribute *attr, | |
425 | const char *buf, size_t len, int nr) | |
426 | { | |
427 | struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
428 | struct lp55xx_chip *chip = led->chip; | |
429 | struct lp55xx_engine *engine = &chip->engines[nr - 1]; | |
430 | ||
431 | mutex_lock(&chip->lock); | |
432 | ||
433 | chip->engine_idx = nr; | |
434 | ||
435 | if (!strncmp(buf, "run", 3)) { | |
436 | lp5523_run_engine(chip, true); | |
437 | engine->mode = LP55XX_ENGINE_RUN; | |
438 | } else if (!strncmp(buf, "load", 4)) { | |
439 | lp5523_stop_engine(chip); | |
440 | lp5523_load_engine(chip); | |
441 | engine->mode = LP55XX_ENGINE_LOAD; | |
442 | } else if (!strncmp(buf, "disabled", 8)) { | |
443 | lp5523_stop_engine(chip); | |
444 | engine->mode = LP55XX_ENGINE_DISABLED; | |
445 | } | |
446 | ||
447 | mutex_unlock(&chip->lock); | |
448 | ||
449 | return len; | |
450 | } | |
451 | store_mode(1) | |
452 | store_mode(2) | |
453 | store_mode(3) | |
454 | ||
455 | static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len) | |
456 | { | |
457 | u16 tmp_mux = 0; | |
458 | int i; | |
459 | ||
460 | len = min_t(int, len, LP5523_MAX_LEDS); | |
461 | ||
462 | for (i = 0; i < len; i++) { | |
463 | switch (buf[i]) { | |
464 | case '1': | |
465 | tmp_mux |= (1 << i); | |
466 | break; | |
467 | case '0': | |
468 | break; | |
469 | case '\n': | |
470 | i = len; | |
471 | break; | |
472 | default: | |
473 | return -1; | |
474 | } | |
475 | } | |
476 | *mux = tmp_mux; | |
477 | ||
478 | return 0; | |
479 | } | |
480 | ||
481 | static void lp5523_mux_to_array(u16 led_mux, char *array) | |
482 | { | |
483 | int i, pos = 0; | |
484 | for (i = 0; i < LP5523_MAX_LEDS; i++) | |
485 | pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i)); | |
486 | ||
487 | array[pos] = '\0'; | |
488 | } | |
489 | ||
490 | static ssize_t show_engine_leds(struct device *dev, | |
491 | struct device_attribute *attr, | |
492 | char *buf, int nr) | |
493 | { | |
494 | struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
495 | struct lp55xx_chip *chip = led->chip; | |
496 | char mux[LP5523_MAX_LEDS + 1]; | |
497 | ||
498 | lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux); | |
499 | ||
500 | return sprintf(buf, "%s\n", mux); | |
501 | } | |
502 | show_leds(1) | |
503 | show_leds(2) | |
504 | show_leds(3) | |
505 | ||
506 | static int lp5523_load_mux(struct lp55xx_chip *chip, u16 mux, int nr) | |
507 | { | |
508 | struct lp55xx_engine *engine = &chip->engines[nr - 1]; | |
509 | int ret; | |
4d1707c1 | 510 | static const u8 mux_page[] = { |
45e611bf MK |
511 | [LP55XX_ENGINE_1] = LP5523_PAGE_MUX1, |
512 | [LP55XX_ENGINE_2] = LP5523_PAGE_MUX2, | |
513 | [LP55XX_ENGINE_3] = LP5523_PAGE_MUX3, | |
514 | }; | |
515 | ||
516 | lp5523_load_engine(chip); | |
517 | ||
518 | ret = lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, mux_page[nr]); | |
519 | if (ret) | |
520 | return ret; | |
521 | ||
522 | ret = lp55xx_write(chip, LP5523_REG_PROG_MEM , (u8)(mux >> 8)); | |
523 | if (ret) | |
524 | return ret; | |
525 | ||
526 | ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + 1, (u8)(mux)); | |
527 | if (ret) | |
528 | return ret; | |
529 | ||
530 | engine->led_mux = mux; | |
531 | return 0; | |
532 | } | |
533 | ||
534 | static ssize_t store_engine_leds(struct device *dev, | |
535 | struct device_attribute *attr, | |
536 | const char *buf, size_t len, int nr) | |
537 | { | |
538 | struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
539 | struct lp55xx_chip *chip = led->chip; | |
540 | struct lp55xx_engine *engine = &chip->engines[nr - 1]; | |
541 | u16 mux = 0; | |
542 | ssize_t ret; | |
543 | ||
544 | if (lp5523_mux_parse(buf, &mux, len)) | |
545 | return -EINVAL; | |
546 | ||
547 | mutex_lock(&chip->lock); | |
548 | ||
549 | chip->engine_idx = nr; | |
550 | ret = -EINVAL; | |
551 | ||
552 | if (engine->mode != LP55XX_ENGINE_LOAD) | |
553 | goto leave; | |
554 | ||
555 | if (lp5523_load_mux(chip, mux, nr)) | |
556 | goto leave; | |
557 | ||
558 | ret = len; | |
559 | leave: | |
560 | mutex_unlock(&chip->lock); | |
561 | return ret; | |
562 | } | |
563 | store_leds(1) | |
564 | store_leds(2) | |
565 | store_leds(3) | |
566 | ||
567 | static ssize_t store_engine_load(struct device *dev, | |
568 | struct device_attribute *attr, | |
569 | const char *buf, size_t len, int nr) | |
570 | { | |
571 | struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
572 | struct lp55xx_chip *chip = led->chip; | |
e70988d1 | 573 | int ret; |
45e611bf MK |
574 | |
575 | mutex_lock(&chip->lock); | |
576 | ||
577 | chip->engine_idx = nr; | |
578 | lp5523_load_engine_and_select_page(chip); | |
e70988d1 | 579 | ret = lp5523_update_program_memory(chip, buf, len); |
45e611bf MK |
580 | |
581 | mutex_unlock(&chip->lock); | |
582 | ||
e70988d1 | 583 | return ret; |
45e611bf MK |
584 | } |
585 | store_load(1) | |
586 | store_load(2) | |
587 | store_load(3) | |
588 | ||
0efba16c SO |
589 | static ssize_t lp5523_selftest(struct device *dev, |
590 | struct device_attribute *attr, | |
591 | char *buf) | |
592 | { | |
9ca3bd80 MWK |
593 | struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); |
594 | struct lp55xx_chip *chip = led->chip; | |
595 | struct lp55xx_platform_data *pdata = chip->pdata; | |
0efba16c | 596 | int i, ret, pos = 0; |
0efba16c SO |
597 | u8 status, adc, vdd; |
598 | ||
599 | mutex_lock(&chip->lock); | |
600 | ||
9ca3bd80 | 601 | ret = lp55xx_read(chip, LP5523_REG_STATUS, &status); |
0efba16c SO |
602 | if (ret < 0) |
603 | goto fail; | |
604 | ||
605 | /* Check that ext clock is really in use if requested */ | |
9ca3bd80 | 606 | if (pdata->clock_mode == LP55XX_CLOCK_EXT) { |
0efba16c SO |
607 | if ((status & LP5523_EXT_CLK_USED) == 0) |
608 | goto fail; | |
9ca3bd80 | 609 | } |
0efba16c SO |
610 | |
611 | /* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */ | |
9ca3bd80 | 612 | lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL, LP5523_EN_LEDTEST | 16); |
2e4840ed | 613 | usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */ |
9ca3bd80 | 614 | ret = lp55xx_read(chip, LP5523_REG_STATUS, &status); |
1b21ec5a JH |
615 | if (ret < 0) |
616 | goto fail; | |
617 | ||
0efba16c | 618 | if (!(status & LP5523_LEDTEST_DONE)) |
2e4840ed | 619 | usleep_range(3000, 6000); /* Was not ready. Wait little bit */ |
0efba16c | 620 | |
9ca3bd80 | 621 | ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &vdd); |
1b21ec5a JH |
622 | if (ret < 0) |
623 | goto fail; | |
624 | ||
0efba16c SO |
625 | vdd--; /* There may be some fluctuation in measurement */ |
626 | ||
0e202346 | 627 | for (i = 0; i < LP5523_MAX_LEDS; i++) { |
0efba16c | 628 | /* Skip non-existing channels */ |
9ca3bd80 | 629 | if (pdata->led_config[i].led_current == 0) |
0efba16c SO |
630 | continue; |
631 | ||
632 | /* Set default current */ | |
9ca3bd80 MWK |
633 | lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i, |
634 | pdata->led_config[i].led_current); | |
0efba16c | 635 | |
9ca3bd80 | 636 | lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0xff); |
2e4840ed SO |
637 | /* let current stabilize 2 - 4ms before measurements start */ |
638 | usleep_range(2000, 4000); | |
9ca3bd80 | 639 | lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL, |
0efba16c | 640 | LP5523_EN_LEDTEST | i); |
2e4840ed SO |
641 | /* ADC conversion time is 2.7 ms typically */ |
642 | usleep_range(3000, 6000); | |
9ca3bd80 | 643 | ret = lp55xx_read(chip, LP5523_REG_STATUS, &status); |
1b21ec5a JH |
644 | if (ret < 0) |
645 | goto fail; | |
646 | ||
0efba16c | 647 | if (!(status & LP5523_LEDTEST_DONE)) |
2e4840ed | 648 | usleep_range(3000, 6000);/* Was not ready. Wait. */ |
9ca3bd80 MWK |
649 | |
650 | ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &adc); | |
1b21ec5a JH |
651 | if (ret < 0) |
652 | goto fail; | |
0efba16c SO |
653 | |
654 | if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM) | |
655 | pos += sprintf(buf + pos, "LED %d FAIL\n", i); | |
656 | ||
9ca3bd80 | 657 | lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0x00); |
0efba16c SO |
658 | |
659 | /* Restore current */ | |
9ca3bd80 MWK |
660 | lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i, |
661 | led->led_current); | |
0efba16c SO |
662 | led++; |
663 | } | |
664 | if (pos == 0) | |
665 | pos = sprintf(buf, "OK\n"); | |
666 | goto release_lock; | |
667 | fail: | |
668 | pos = sprintf(buf, "FAIL\n"); | |
669 | ||
670 | release_lock: | |
671 | mutex_unlock(&chip->lock); | |
672 | ||
673 | return pos; | |
674 | } | |
675 | ||
52da81ea TK |
676 | #define show_fader(nr) \ |
677 | static ssize_t show_master_fader##nr(struct device *dev, \ | |
678 | struct device_attribute *attr, \ | |
679 | char *buf) \ | |
680 | { \ | |
681 | return show_master_fader(dev, attr, buf, nr); \ | |
682 | } | |
683 | ||
684 | #define store_fader(nr) \ | |
685 | static ssize_t store_master_fader##nr(struct device *dev, \ | |
686 | struct device_attribute *attr, \ | |
687 | const char *buf, size_t len) \ | |
688 | { \ | |
689 | return store_master_fader(dev, attr, buf, len, nr); \ | |
690 | } | |
691 | ||
692 | static ssize_t show_master_fader(struct device *dev, | |
693 | struct device_attribute *attr, | |
694 | char *buf, int nr) | |
695 | { | |
696 | struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
697 | struct lp55xx_chip *chip = led->chip; | |
698 | int ret; | |
699 | u8 val; | |
700 | ||
701 | mutex_lock(&chip->lock); | |
702 | ret = lp55xx_read(chip, LP5523_REG_MASTER_FADER_BASE + nr - 1, &val); | |
703 | mutex_unlock(&chip->lock); | |
704 | ||
705 | if (ret == 0) | |
706 | ret = sprintf(buf, "%u\n", val); | |
707 | ||
708 | return ret; | |
709 | } | |
710 | show_fader(1) | |
711 | show_fader(2) | |
712 | show_fader(3) | |
713 | ||
714 | static ssize_t store_master_fader(struct device *dev, | |
715 | struct device_attribute *attr, | |
716 | const char *buf, size_t len, int nr) | |
717 | { | |
718 | struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
719 | struct lp55xx_chip *chip = led->chip; | |
720 | int ret; | |
721 | unsigned long val; | |
722 | ||
723 | if (kstrtoul(buf, 0, &val)) | |
724 | return -EINVAL; | |
725 | ||
726 | if (val > 0xff) | |
727 | return -EINVAL; | |
728 | ||
729 | mutex_lock(&chip->lock); | |
730 | ret = lp55xx_write(chip, LP5523_REG_MASTER_FADER_BASE + nr - 1, | |
731 | (u8)val); | |
732 | mutex_unlock(&chip->lock); | |
733 | ||
734 | if (ret == 0) | |
735 | ret = len; | |
736 | ||
737 | return ret; | |
738 | } | |
739 | store_fader(1) | |
740 | store_fader(2) | |
741 | store_fader(3) | |
742 | ||
743 | static ssize_t show_master_fader_leds(struct device *dev, | |
744 | struct device_attribute *attr, | |
745 | char *buf) | |
746 | { | |
747 | struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
748 | struct lp55xx_chip *chip = led->chip; | |
749 | int i, ret, pos = 0; | |
750 | u8 val; | |
751 | ||
752 | mutex_lock(&chip->lock); | |
753 | ||
754 | for (i = 0; i < LP5523_MAX_LEDS; i++) { | |
755 | ret = lp55xx_read(chip, LP5523_REG_LED_CTRL_BASE + i, &val); | |
756 | if (ret) | |
757 | goto leave; | |
758 | ||
759 | val = (val & LP5523_FADER_MAPPING_MASK) | |
760 | >> LP5523_FADER_MAPPING_SHIFT; | |
761 | if (val > 3) { | |
762 | ret = -EINVAL; | |
763 | goto leave; | |
764 | } | |
765 | buf[pos++] = val + '0'; | |
766 | } | |
767 | buf[pos++] = '\n'; | |
768 | ret = pos; | |
769 | leave: | |
770 | mutex_unlock(&chip->lock); | |
771 | return ret; | |
772 | } | |
773 | ||
774 | static ssize_t store_master_fader_leds(struct device *dev, | |
775 | struct device_attribute *attr, | |
776 | const char *buf, size_t len) | |
777 | { | |
778 | struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | |
779 | struct lp55xx_chip *chip = led->chip; | |
780 | int i, n, ret; | |
781 | u8 val; | |
782 | ||
783 | n = min_t(int, len, LP5523_MAX_LEDS); | |
784 | ||
785 | mutex_lock(&chip->lock); | |
786 | ||
787 | for (i = 0; i < n; i++) { | |
788 | if (buf[i] >= '0' && buf[i] <= '3') { | |
789 | val = (buf[i] - '0') << LP5523_FADER_MAPPING_SHIFT; | |
790 | ret = lp55xx_update_bits(chip, | |
791 | LP5523_REG_LED_CTRL_BASE + i, | |
792 | LP5523_FADER_MAPPING_MASK, | |
793 | val); | |
794 | if (ret) | |
795 | goto leave; | |
796 | } else { | |
797 | ret = -EINVAL; | |
798 | goto leave; | |
799 | } | |
800 | } | |
801 | ret = len; | |
802 | leave: | |
803 | mutex_unlock(&chip->lock); | |
804 | return ret; | |
805 | } | |
806 | ||
95b2af63 | 807 | static int lp5523_led_brightness(struct lp55xx_led *led) |
0efba16c | 808 | { |
a6e4679a | 809 | struct lp55xx_chip *chip = led->chip; |
95b2af63 | 810 | int ret; |
0efba16c SO |
811 | |
812 | mutex_lock(&chip->lock); | |
95b2af63 | 813 | ret = lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + led->chan_nr, |
0efba16c | 814 | led->brightness); |
0efba16c | 815 | mutex_unlock(&chip->lock); |
95b2af63 | 816 | return ret; |
0efba16c SO |
817 | } |
818 | ||
45e611bf MK |
819 | static LP55XX_DEV_ATTR_RW(engine1_mode, show_engine1_mode, store_engine1_mode); |
820 | static LP55XX_DEV_ATTR_RW(engine2_mode, show_engine2_mode, store_engine2_mode); | |
821 | static LP55XX_DEV_ATTR_RW(engine3_mode, show_engine3_mode, store_engine3_mode); | |
822 | static LP55XX_DEV_ATTR_RW(engine1_leds, show_engine1_leds, store_engine1_leds); | |
823 | static LP55XX_DEV_ATTR_RW(engine2_leds, show_engine2_leds, store_engine2_leds); | |
824 | static LP55XX_DEV_ATTR_RW(engine3_leds, show_engine3_leds, store_engine3_leds); | |
825 | static LP55XX_DEV_ATTR_WO(engine1_load, store_engine1_load); | |
826 | static LP55XX_DEV_ATTR_WO(engine2_load, store_engine2_load); | |
827 | static LP55XX_DEV_ATTR_WO(engine3_load, store_engine3_load); | |
828 | static LP55XX_DEV_ATTR_RO(selftest, lp5523_selftest); | |
52da81ea TK |
829 | static LP55XX_DEV_ATTR_RW(master_fader1, show_master_fader1, |
830 | store_master_fader1); | |
831 | static LP55XX_DEV_ATTR_RW(master_fader2, show_master_fader2, | |
832 | store_master_fader2); | |
833 | static LP55XX_DEV_ATTR_RW(master_fader3, show_master_fader3, | |
834 | store_master_fader3); | |
835 | static LP55XX_DEV_ATTR_RW(master_fader_leds, show_master_fader_leds, | |
836 | store_master_fader_leds); | |
0efba16c SO |
837 | |
838 | static struct attribute *lp5523_attributes[] = { | |
45e611bf MK |
839 | &dev_attr_engine1_mode.attr, |
840 | &dev_attr_engine2_mode.attr, | |
841 | &dev_attr_engine3_mode.attr, | |
842 | &dev_attr_engine1_load.attr, | |
843 | &dev_attr_engine2_load.attr, | |
844 | &dev_attr_engine3_load.attr, | |
845 | &dev_attr_engine1_leds.attr, | |
846 | &dev_attr_engine2_leds.attr, | |
847 | &dev_attr_engine3_leds.attr, | |
0efba16c | 848 | &dev_attr_selftest.attr, |
52da81ea TK |
849 | &dev_attr_master_fader1.attr, |
850 | &dev_attr_master_fader2.attr, | |
851 | &dev_attr_master_fader3.attr, | |
852 | &dev_attr_master_fader_leds.attr, | |
f1625842 | 853 | NULL, |
0efba16c SO |
854 | }; |
855 | ||
856 | static const struct attribute_group lp5523_group = { | |
857 | .attrs = lp5523_attributes, | |
858 | }; | |
859 | ||
48068d5d MWK |
860 | /* Chip specific configurations */ |
861 | static struct lp55xx_device_config lp5523_cfg = { | |
862 | .reset = { | |
863 | .addr = LP5523_REG_RESET, | |
864 | .val = LP5523_RESET, | |
865 | }, | |
e3a700d8 MWK |
866 | .enable = { |
867 | .addr = LP5523_REG_ENABLE, | |
868 | .val = LP5523_ENABLE, | |
869 | }, | |
0e202346 | 870 | .max_channel = LP5523_MAX_LEDS, |
ffbdccdb | 871 | .post_init_device = lp5523_post_init_device, |
95b2af63 | 872 | .brightness_fn = lp5523_led_brightness, |
a96bfa13 | 873 | .set_led_current = lp5523_set_led_current, |
db6eaf83 MWK |
874 | .firmware_cb = lp5523_firmware_loaded, |
875 | .run_engine = lp5523_run_engine, | |
e73c0ce6 | 876 | .dev_attr_group = &lp5523_group, |
48068d5d MWK |
877 | }; |
878 | ||
98ea1ea2 | 879 | static int lp5523_probe(struct i2c_client *client, |
0efba16c SO |
880 | const struct i2c_device_id *id) |
881 | { | |
22ebeb48 | 882 | int ret; |
6a0c9a47 MWK |
883 | struct lp55xx_chip *chip; |
884 | struct lp55xx_led *led; | |
ed133352 | 885 | struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev); |
7542a04b LW |
886 | struct device_node *np = client->dev.of_node; |
887 | ||
ed133352 | 888 | if (!pdata) { |
7542a04b | 889 | if (np) { |
ed133352 MK |
890 | pdata = lp55xx_of_populate_pdata(&client->dev, np); |
891 | if (IS_ERR(pdata)) | |
892 | return PTR_ERR(pdata); | |
7542a04b LW |
893 | } else { |
894 | dev_err(&client->dev, "no platform data\n"); | |
895 | return -EINVAL; | |
896 | } | |
0efba16c SO |
897 | } |
898 | ||
6a0c9a47 MWK |
899 | chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); |
900 | if (!chip) | |
901 | return -ENOMEM; | |
902 | ||
a86854d0 KC |
903 | led = devm_kcalloc(&client->dev, |
904 | pdata->num_channels, sizeof(*led), GFP_KERNEL); | |
6a0c9a47 MWK |
905 | if (!led) |
906 | return -ENOMEM; | |
907 | ||
908 | chip->cl = client; | |
909 | chip->pdata = pdata; | |
48068d5d | 910 | chip->cfg = &lp5523_cfg; |
6a0c9a47 MWK |
911 | |
912 | mutex_init(&chip->lock); | |
0efba16c | 913 | |
6a0c9a47 | 914 | i2c_set_clientdata(client, led); |
0efba16c | 915 | |
22ebeb48 | 916 | ret = lp55xx_init_device(chip); |
0efba16c | 917 | if (ret) |
f6c64c6f | 918 | goto err_init; |
0efba16c | 919 | |
56a1e9ad | 920 | dev_info(&client->dev, "%s Programmable led chip found\n", id->name); |
0efba16c | 921 | |
9e9b3db1 | 922 | ret = lp55xx_register_leds(led, chip); |
f6524808 | 923 | if (ret) |
9e9b3db1 | 924 | goto err_register_leds; |
0efba16c | 925 | |
e73c0ce6 | 926 | ret = lp55xx_register_sysfs(chip); |
0efba16c SO |
927 | if (ret) { |
928 | dev_err(&client->dev, "registering sysfs failed\n"); | |
e73c0ce6 | 929 | goto err_register_sysfs; |
0efba16c | 930 | } |
e73c0ce6 MWK |
931 | |
932 | return 0; | |
933 | ||
934 | err_register_sysfs: | |
c3a68ebf | 935 | lp55xx_unregister_leds(led, chip); |
9e9b3db1 | 936 | err_register_leds: |
6ce61762 | 937 | lp55xx_deinit_device(chip); |
f6c64c6f | 938 | err_init: |
0efba16c SO |
939 | return ret; |
940 | } | |
941 | ||
942 | static int lp5523_remove(struct i2c_client *client) | |
943 | { | |
6ce61762 MWK |
944 | struct lp55xx_led *led = i2c_get_clientdata(client); |
945 | struct lp55xx_chip *chip = led->chip; | |
0efba16c | 946 | |
28c9266b | 947 | lp5523_stop_all_engines(chip); |
87cc4bde | 948 | lp55xx_unregister_sysfs(chip); |
c3a68ebf | 949 | lp55xx_unregister_leds(led, chip); |
6ce61762 | 950 | lp55xx_deinit_device(chip); |
0efba16c | 951 | |
0efba16c SO |
952 | return 0; |
953 | } | |
954 | ||
955 | static const struct i2c_device_id lp5523_id[] = { | |
27d7704e KM |
956 | { "lp5523", LP5523 }, |
957 | { "lp55231", LP55231 }, | |
0efba16c SO |
958 | { } |
959 | }; | |
960 | ||
961 | MODULE_DEVICE_TABLE(i2c, lp5523_id); | |
962 | ||
33c88b67 AL |
963 | #ifdef CONFIG_OF |
964 | static const struct of_device_id of_lp5523_leds_match[] = { | |
965 | { .compatible = "national,lp5523", }, | |
9ef8c877 | 966 | { .compatible = "ti,lp55231", }, |
33c88b67 AL |
967 | {}, |
968 | }; | |
969 | ||
970 | MODULE_DEVICE_TABLE(of, of_lp5523_leds_match); | |
971 | #endif | |
972 | ||
0efba16c SO |
973 | static struct i2c_driver lp5523_driver = { |
974 | .driver = { | |
27d7704e | 975 | .name = "lp5523x", |
33c88b67 | 976 | .of_match_table = of_match_ptr(of_lp5523_leds_match), |
0efba16c SO |
977 | }, |
978 | .probe = lp5523_probe, | |
979 | .remove = lp5523_remove, | |
980 | .id_table = lp5523_id, | |
981 | }; | |
982 | ||
09a0d183 | 983 | module_i2c_driver(lp5523_driver); |
0efba16c SO |
984 | |
985 | MODULE_AUTHOR("Mathias Nyman <[email protected]>"); | |
a2387cb9 | 986 | MODULE_AUTHOR("Milo Kim <[email protected]>"); |
0efba16c SO |
987 | MODULE_DESCRIPTION("LP5523 LED engine"); |
988 | MODULE_LICENSE("GPL"); |