libata-pmp: add support for Thermaltake BlackX Duet esata drive dock

[linux.git] / drivers / leds / leds-alix2.c

/*
 * LEDs driver for PCEngines ALIX.2 and ALIX.3
 *
 * Copyright (C) 2008 Constantin Baranov <[email protected]>
 */

#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/string.h>
#include <linux/pci.h>

static int force = 0;
module_param(force, bool, 0444);
MODULE_PARM_DESC(force, "Assume system has ALIX.2/ALIX.3 style LEDs");

#define MSR_LBAR_GPIO		0x5140000C
#define CS5535_GPIO_SIZE	256

static u32 gpio_base;

static struct pci_device_id divil_pci[] = {
	{ PCI_DEVICE(PCI_VENDOR_ID_NS,  PCI_DEVICE_ID_NS_CS5535_ISA) },
	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) },
	{ } /* NULL entry */
};
MODULE_DEVICE_TABLE(pci, divil_pci);

struct alix_led {
	struct led_classdev cdev;
	unsigned short port;
	unsigned int on_value;
	unsigned int off_value;
};

static void alix_led_set(struct led_classdev *led_cdev,
			 enum led_brightness brightness)
{
	struct alix_led *led_dev =
		container_of(led_cdev, struct alix_led, cdev);

	if (brightness)
		outl(led_dev->on_value, gpio_base + led_dev->port);
	else
		outl(led_dev->off_value, gpio_base + led_dev->port);
}

static struct alix_led alix_leds[] = {
	{
		.cdev = {
			.name = "alix:1",
			.brightness_set = alix_led_set,
		},
		.port = 0x00,
		.on_value = 1 << 22,
		.off_value = 1 << 6,
	},
	{
		.cdev = {
			.name = "alix:2",
			.brightness_set = alix_led_set,
		},
		.port = 0x80,
		.on_value = 1 << 25,
		.off_value = 1 << 9,
	},
	{
		.cdev = {
			.name = "alix:3",
			.brightness_set = alix_led_set,
		},
		.port = 0x80,
		.on_value = 1 << 27,
		.off_value = 1 << 11,
	},
};

static int __init alix_led_probe(struct platform_device *pdev)
{
	int i;
	int ret;

	for (i = 0; i < ARRAY_SIZE(alix_leds); i++) {
		alix_leds[i].cdev.flags |= LED_CORE_SUSPENDRESUME;
		ret = led_classdev_register(&pdev->dev, &alix_leds[i].cdev);
		if (ret < 0)
			goto fail;
	}
	return 0;

fail:
	while (--i >= 0)
		led_classdev_unregister(&alix_leds[i].cdev);
	return ret;
}

static int alix_led_remove(struct platform_device *pdev)
{
	int i;

	for (i = 0; i < ARRAY_SIZE(alix_leds); i++)
		led_classdev_unregister(&alix_leds[i].cdev);
	return 0;
}

static struct platform_driver alix_led_driver = {
	.remove = alix_led_remove,
	.driver = {
		.name = KBUILD_MODNAME,
		.owner = THIS_MODULE,
	},
};

static int __init alix_present(unsigned long bios_phys,
				const char *alix_sig,
				size_t alix_sig_len)
{
	const size_t bios_len = 0x00010000;
	const char *bios_virt;
	const char *scan_end;
	const char *p;
	char name[64];

	if (force) {
		printk(KERN_NOTICE "%s: forced to skip BIOS test, "
		       "assume system has ALIX.2 style LEDs\n",
		       KBUILD_MODNAME);
		return 1;
	}

	bios_virt = phys_to_virt(bios_phys);
	scan_end = bios_virt + bios_len - (alix_sig_len + 2);
	for (p = bios_virt; p < scan_end; p++) {
		const char *tail;
		char *a;

		if (memcmp(p, alix_sig, alix_sig_len) != 0)
			continue;

		memcpy(name, p, sizeof(name));

		/* remove the first \0 character from string */
		a = strchr(name, '\0');
		if (a)
			*a = ' ';

		/* cut the string at a newline */
		a = strchr(name, '\r');
		if (a)
			*a = '\0';

		tail = p + alix_sig_len;
		if ((tail[0] == '2' || tail[0] == '3')) {
			printk(KERN_INFO
			       "%s: system is recognized as \"%s\"\n",
			       KBUILD_MODNAME, name);
			return 1;
		}
	}

	return 0;
}

static struct platform_device *pdev;

static int __init alix_pci_led_init(void)
{
	u32 low, hi;

	if (pci_dev_present(divil_pci) == 0) {
		printk(KERN_WARNING KBUILD_MODNAME": DIVIL not found\n");
		return -ENODEV;
	}

	/* Grab the GPIO I/O range */
	rdmsr(MSR_LBAR_GPIO, low, hi);

	/* Check the mask and whether GPIO is enabled (sanity check) */
	if (hi != 0x0000f001) {
		printk(KERN_WARNING KBUILD_MODNAME": GPIO not enabled\n");
		return -ENODEV;
	}

	/* Mask off the IO base address */
	gpio_base = low & 0x0000ff00;

	if (!request_region(gpio_base, CS5535_GPIO_SIZE, KBUILD_MODNAME)) {
		printk(KERN_ERR KBUILD_MODNAME": can't allocate I/O for GPIO\n");
		return -ENODEV;
	}

	/* Set GPIO function to output */
	outl(1 << 6, gpio_base + 0x04);
	outl(1 << 9, gpio_base + 0x84);
	outl(1 << 11, gpio_base + 0x84);

	return 0;
}

static int __init alix_led_init(void)
{
	int ret = -ENODEV;
	const char tinybios_sig[] = "PC Engines ALIX.";
	const char coreboot_sig[] = "PC Engines\0ALIX.";

	if (alix_present(0xf0000, tinybios_sig, sizeof(tinybios_sig) - 1) ||
	    alix_present(0x500, coreboot_sig, sizeof(coreboot_sig) - 1))
		ret = alix_pci_led_init();

	if (ret < 0)
		return ret;

	pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0);
	if (!IS_ERR(pdev)) {
		ret = platform_driver_probe(&alix_led_driver, alix_led_probe);
		if (ret)
			platform_device_unregister(pdev);
	} else
		ret = PTR_ERR(pdev);

	return ret;
}

static void __exit alix_led_exit(void)
{
	platform_device_unregister(pdev);
	platform_driver_unregister(&alix_led_driver);
	release_region(gpio_base, CS5535_GPIO_SIZE);
}

module_init(alix_led_init);
module_exit(alix_led_exit);

MODULE_AUTHOR("Constantin Baranov <[email protected]>");
MODULE_DESCRIPTION("PCEngines ALIX.2 and ALIX.3 LED driver");
MODULE_LICENSE("GPL");