[linux.git] / drivers / ata / pata_acpi.c

/*
 *	ACPI PATA driver
 *
 *	(c) 2007 Red Hat
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/gfp.h>
#include <linux/acpi.h>
#include <linux/libata.h>
#include <linux/ata.h>
#include <scsi/scsi_host.h>

#define DRV_NAME	"pata_acpi"
#define DRV_VERSION	"0.2.3"

struct pata_acpi {
	struct ata_acpi_gtm gtm;
	void *last;
	unsigned long mask[2];
};

/**
 *	pacpi_pre_reset	-	check for 40/80 pin
 *	@ap: Port
 *	@deadline: deadline jiffies for the operation
 *
 *	Perform the PATA port setup we need.
 */

static int pacpi_pre_reset(struct ata_link *link, unsigned long deadline)
{
	struct ata_port *ap = link->ap;
	struct pata_acpi *acpi = ap->private_data;
	if (ACPI_HANDLE(&ap->tdev) == NULL || ata_acpi_gtm(ap, &acpi->gtm) < 0)
		return -ENODEV;

	return ata_sff_prereset(link, deadline);
}

/**
 *	pacpi_cable_detect	-	cable type detection
 *	@ap: port to detect
 *
 *	Perform device specific cable detection
 */

static int pacpi_cable_detect(struct ata_port *ap)
{
	struct pata_acpi *acpi = ap->private_data;

	if ((acpi->mask[0] | acpi->mask[1]) & (0xF8 << ATA_SHIFT_UDMA))
		return ATA_CBL_PATA80;
	else
		return ATA_CBL_PATA40;
}

/**
 *	pacpi_discover_modes	-	filter non ACPI modes
 *	@adev: ATA device
 *	@mask: proposed modes
 *
 *	Try the modes available and see which ones the ACPI method will
 *	set up sensibly. From this we get a mask of ACPI modes we can use
 */

static unsigned long pacpi_discover_modes(struct ata_port *ap, struct ata_device *adev)
{
	struct pata_acpi *acpi = ap->private_data;
	struct ata_acpi_gtm probe;
	unsigned int xfer_mask;

	probe = acpi->gtm;

	ata_acpi_gtm(ap, &probe);

	xfer_mask = ata_acpi_gtm_xfermask(adev, &probe);

	if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA))
		ap->cbl = ATA_CBL_PATA80;

	return xfer_mask;
}

/**
 *	pacpi_mode_filter	-	mode filter for ACPI
 *	@adev: device
 *	@mask: mask of valid modes
 *
 *	Filter the valid mode list according to our own specific rules, in
 *	this case the list of discovered valid modes obtained by ACPI probing
 */

static unsigned long pacpi_mode_filter(struct ata_device *adev, unsigned long mask)
{
	struct pata_acpi *acpi = adev->link->ap->private_data;
	return mask & acpi->mask[adev->devno];
}

/**
 *	pacpi_set_piomode	-	set initial PIO mode data
 *	@ap: ATA interface
 *	@adev: ATA device
 */

static void pacpi_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
	int unit = adev->devno;
	struct pata_acpi *acpi = ap->private_data;
	const struct ata_timing *t;

	if (!(acpi->gtm.flags & 0x10))
		unit = 0;

	/* Now stuff the nS values into the structure */
	t = ata_timing_find_mode(adev->pio_mode);
	acpi->gtm.drive[unit].pio = t->cycle;
	ata_acpi_stm(ap, &acpi->gtm);
	/* See what mode we actually got */
	ata_acpi_gtm(ap, &acpi->gtm);
}

/**
 *	pacpi_set_dmamode	-	set initial DMA mode data
 *	@ap: ATA interface
 *	@adev: ATA device
 */

static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
	int unit = adev->devno;
	struct pata_acpi *acpi = ap->private_data;
	const struct ata_timing *t;

	if (!(acpi->gtm.flags & 0x10))
		unit = 0;

	/* Now stuff the nS values into the structure */
	t = ata_timing_find_mode(adev->dma_mode);
	if (adev->dma_mode >= XFER_UDMA_0) {
		acpi->gtm.drive[unit].dma = t->udma;
		acpi->gtm.flags |= (1 << (2 * unit));
	} else {
		acpi->gtm.drive[unit].dma = t->cycle;
		acpi->gtm.flags &= ~(1 << (2 * unit));
	}
	ata_acpi_stm(ap, &acpi->gtm);
	/* See what mode we actually got */
	ata_acpi_gtm(ap, &acpi->gtm);
}

/**
 *	pacpi_qc_issue	-	command issue
 *	@qc: command pending
 *
 *	Called when the libata layer is about to issue a command. We wrap
 *	this interface so that we can load the correct ATA timings if
 *	necessary.
 */

static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc)
{
	struct ata_port *ap = qc->ap;
	struct ata_device *adev = qc->dev;
	struct pata_acpi *acpi = ap->private_data;

	if (acpi->gtm.flags & 0x10)
		return ata_bmdma_qc_issue(qc);

	if (adev != acpi->last) {
		pacpi_set_piomode(ap, adev);
		if (ata_dma_enabled(adev))
			pacpi_set_dmamode(ap, adev);
		acpi->last = adev;
	}
	return ata_bmdma_qc_issue(qc);
}

/**
 *	pacpi_port_start	-	port setup
 *	@ap: ATA port being set up
 *
 *	Use the port_start hook to maintain private control structures
 */

static int pacpi_port_start(struct ata_port *ap)
{
	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	struct pata_acpi *acpi;

	if (ACPI_HANDLE(&ap->tdev) == NULL)
		return -ENODEV;

	acpi = ap->private_data = devm_kzalloc(&pdev->dev, sizeof(struct pata_acpi), GFP_KERNEL);
	if (ap->private_data == NULL)
		return -ENOMEM;
	acpi->mask[0] = pacpi_discover_modes(ap, &ap->link.device[0]);
	acpi->mask[1] = pacpi_discover_modes(ap, &ap->link.device[1]);
	return ata_bmdma_port_start(ap);
}

static struct scsi_host_template pacpi_sht = {
	ATA_BMDMA_SHT(DRV_NAME),
};

static struct ata_port_operations pacpi_ops = {
	.inherits		= &ata_bmdma_port_ops,
	.qc_issue		= pacpi_qc_issue,
	.cable_detect		= pacpi_cable_detect,
	.mode_filter		= pacpi_mode_filter,
	.set_piomode		= pacpi_set_piomode,
	.set_dmamode		= pacpi_set_dmamode,
	.prereset		= pacpi_pre_reset,
	.port_start		= pacpi_port_start,
};


/**
 *	pacpi_init_one - Register ACPI ATA PCI device with kernel services
 *	@pdev: PCI device to register
 *	@ent: Entry in pacpi_pci_tbl matching with @pdev
 *
 *	Called from kernel PCI layer.
 *
 *	LOCKING:
 *	Inherited from PCI layer (may sleep).
 *
 *	RETURNS:
 *	Zero on success, or -ERRNO value.
 */

static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
{
	static const struct ata_port_info info = {
		.flags		= ATA_FLAG_SLAVE_POSS,

		.pio_mask	= ATA_PIO4,
		.mwdma_mask	= ATA_MWDMA2,
		.udma_mask 	= ATA_UDMA6,

		.port_ops	= &pacpi_ops,
	};
	const struct ata_port_info *ppi[] = { &info, NULL };
	if (pdev->vendor == PCI_VENDOR_ID_ATI) {
		int rc = pcim_enable_device(pdev);
		if (rc < 0)
			return rc;
		pcim_pin_device(pdev);
	}
	return ata_pci_bmdma_init_one(pdev, ppi, &pacpi_sht, NULL, 0);
}

static const struct pci_device_id pacpi_pci_tbl[] = {
	{ PCI_ANY_ID,		PCI_ANY_ID,			   PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1},
	{ }	/* terminate list */
};

static struct pci_driver pacpi_pci_driver = {
	.name			= DRV_NAME,
	.id_table		= pacpi_pci_tbl,
	.probe			= pacpi_init_one,
	.remove			= ata_pci_remove_one,
#ifdef CONFIG_PM_SLEEP
	.suspend		= ata_pci_device_suspend,
	.resume			= ata_pci_device_resume,
#endif
};

module_pci_driver(pacpi_pci_driver);

MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("SCSI low-level driver for ATA in ACPI mode");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, pacpi_pci_tbl);
MODULE_VERSION(DRV_VERSION);
Commit	Line	Data
025621f9 AC	1	/*
	2	* ACPI PATA driver
	3	*
ab771630	4	* (c) 2007 Red Hat
025621f9 AC	5	*/
	6
	7	#include <linux/kernel.h>
	8	#include <linux/module.h>
	9	#include <linux/pci.h>
025621f9 AC	10	#include <linux/blkdev.h>
	11	#include <linux/delay.h>
	12	#include <linux/device.h>
5a0e3ad6	13	#include <linux/gfp.h>
8b48463f	14	#include <linux/acpi.h>
025621f9 AC	15	#include <linux/libata.h>
025621f9 AC	16	#include <linux/ata.h>
8b48463f	17	#include <scsi/scsi_host.h>
025621f9 AC	18
	19	#define DRV_NAME "pata_acpi"
	20	#define DRV_VERSION "0.2.3"
	21
	22	struct pata_acpi {
	23	struct ata_acpi_gtm gtm;
	24	void *last;
	25	unsigned long mask[2];
	26	};
	27
	28	/**
	29	* pacpi_pre_reset - check for 40/80 pin
	30	* @ap: Port
	31	* @deadline: deadline jiffies for the operation
	32	*
	33	* Perform the PATA port setup we need.
	34	*/
	35
	36	static int pacpi_pre_reset(struct ata_link *link, unsigned long deadline)
	37	{
	38	struct ata_port *ap = link->ap;
	39	struct pata_acpi *acpi = ap->private_data;
f1bc1e4c	40	if (ACPI_HANDLE(&ap->tdev) == NULL \|\| ata_acpi_gtm(ap, &acpi->gtm) < 0)
025621f9 AC	41	return -ENODEV;
025621f9 AC	42
9363c382	43	return ata_sff_prereset(link, deadline);
025621f9 AC	44	}
	45
	46	/**
	47	* pacpi_cable_detect - cable type detection
	48	* @ap: port to detect
	49	*
	50	* Perform device specific cable detection
	51	*/
	52
	53	static int pacpi_cable_detect(struct ata_port *ap)
	54	{
	55	struct pata_acpi *acpi = ap->private_data;
	56
	57	if ((acpi->mask[0] \| acpi->mask[1]) & (0xF8 << ATA_SHIFT_UDMA))
	58	return ATA_CBL_PATA80;
	59	else
	60	return ATA_CBL_PATA40;
	61	}
	62
025621f9 AC	63	/**
	64	* pacpi_discover_modes - filter non ACPI modes
	65	* @adev: ATA device
	66	* @mask: proposed modes
	67	*
	68	* Try the modes available and see which ones the ACPI method will
	69	* set up sensibly. From this we get a mask of ACPI modes we can use
	70	*/
	71
	72	static unsigned long pacpi_discover_modes(struct ata_port ap, struct ata_device adev)
	73	{
025621f9	74	struct pata_acpi *acpi = ap->private_data;
025621f9	75	struct ata_acpi_gtm probe;
7c77fa4d	76	unsigned int xfer_mask;
025621f9 AC	77
	78	probe = acpi->gtm;
	79
025621f9 AC	80	ata_acpi_gtm(ap, &probe);
025621f9 AC	81
7c77fa4d	82	xfer_mask = ata_acpi_gtm_xfermask(adev, &probe);
025621f9	83
7c77fa4d	84	if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA))
025621f9	85	ap->cbl = ATA_CBL_PATA80;
7c77fa4d TH	86
7c77fa4d TH	87	return xfer_mask;
025621f9 AC	88	}
	89
	90	/**
	91	* pacpi_mode_filter - mode filter for ACPI
	92	* @adev: device
	93	* @mask: mask of valid modes
	94	*
	95	* Filter the valid mode list according to our own specific rules, in
	96	* this case the list of discovered valid modes obtained by ACPI probing
	97	*/
	98
	99	static unsigned long pacpi_mode_filter(struct ata_device *adev, unsigned long mask)
	100	{
	101	struct pata_acpi *acpi = adev->link->ap->private_data;
c7087652	102	return mask & acpi->mask[adev->devno];
025621f9 AC	103	}
	104
	105	/**
	106	* pacpi_set_piomode - set initial PIO mode data
	107	* @ap: ATA interface
	108	* @adev: ATA device
	109	*/
	110
	111	static void pacpi_set_piomode(struct ata_port ap, struct ata_device adev)
	112	{
	113	int unit = adev->devno;
	114	struct pata_acpi *acpi = ap->private_data;
a0f79b92	115	const struct ata_timing *t;
025621f9	116
b447916e	117	if (!(acpi->gtm.flags & 0x10))
025621f9 AC	118	unit = 0;
	119
	120	/* Now stuff the nS values into the structure */
a0f79b92 TH	121	t = ata_timing_find_mode(adev->pio_mode);
a0f79b92 TH	122	acpi->gtm.drive[unit].pio = t->cycle;
025621f9 AC	123	ata_acpi_stm(ap, &acpi->gtm);
	124	/* See what mode we actually got */
	125	ata_acpi_gtm(ap, &acpi->gtm);
	126	}
	127
	128	/**
	129	* pacpi_set_dmamode - set initial DMA mode data
	130	* @ap: ATA interface
	131	* @adev: ATA device
	132	*/
	133
	134	static void pacpi_set_dmamode(struct ata_port ap, struct ata_device adev)
	135	{
	136	int unit = adev->devno;
	137	struct pata_acpi *acpi = ap->private_data;
a0f79b92	138	const struct ata_timing *t;
025621f9	139
b447916e	140	if (!(acpi->gtm.flags & 0x10))
025621f9 AC	141	unit = 0;
	142
	143	/* Now stuff the nS values into the structure */
a0f79b92	144	t = ata_timing_find_mode(adev->dma_mode);
025621f9	145	if (adev->dma_mode >= XFER_UDMA_0) {
a0f79b92	146	acpi->gtm.drive[unit].dma = t->udma;
025621f9 AC	147	acpi->gtm.flags \|= (1 << (2 * unit));
025621f9 AC	148	} else {
a0f79b92	149	acpi->gtm.drive[unit].dma = t->cycle;
025621f9 AC	150	acpi->gtm.flags &= ~(1 << (2 * unit));
	151	}
	152	ata_acpi_stm(ap, &acpi->gtm);
	153	/* See what mode we actually got */
	154	ata_acpi_gtm(ap, &acpi->gtm);
	155	}
	156
	157	/**
9363c382	158	* pacpi_qc_issue - command issue
025621f9 AC	159	* @qc: command pending
	160	*
	161	* Called when the libata layer is about to issue a command. We wrap
	162	* this interface so that we can load the correct ATA timings if
3ad2f3fb	163	* necessary.
025621f9 AC	164	*/
025621f9 AC	165
9363c382	166	static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc)
025621f9 AC	167	{
	168	struct ata_port *ap = qc->ap;
	169	struct ata_device *adev = qc->dev;
	170	struct pata_acpi *acpi = ap->private_data;
	171
	172	if (acpi->gtm.flags & 0x10)
360ff783	173	return ata_bmdma_qc_issue(qc);
025621f9 AC	174
	175	if (adev != acpi->last) {
	176	pacpi_set_piomode(ap, adev);
b15b3eba	177	if (ata_dma_enabled(adev))
025621f9 AC	178	pacpi_set_dmamode(ap, adev);
	179	acpi->last = adev;
	180	}
360ff783	181	return ata_bmdma_qc_issue(qc);
025621f9 AC	182	}
	183
	184	/**
	185	* pacpi_port_start - port setup
	186	* @ap: ATA port being set up
	187	*
	188	* Use the port_start hook to maintain private control structures
	189	*/
	190
	191	static int pacpi_port_start(struct ata_port *ap)
	192	{
	193	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	194	struct pata_acpi *acpi;
	195
f1bc1e4c	196	if (ACPI_HANDLE(&ap->tdev) == NULL)
025621f9 AC	197	return -ENODEV;
	198
	199	acpi = ap->private_data = devm_kzalloc(&pdev->dev, sizeof(struct pata_acpi), GFP_KERNEL);
	200	if (ap->private_data == NULL)
	201	return -ENOMEM;
	202	acpi->mask[0] = pacpi_discover_modes(ap, &ap->link.device[0]);
	203	acpi->mask[1] = pacpi_discover_modes(ap, &ap->link.device[1]);
47db477e	204	return ata_bmdma_port_start(ap);
025621f9 AC	205	}
	206
	207	static struct scsi_host_template pacpi_sht = {
68d1d07b	208	ATA_BMDMA_SHT(DRV_NAME),
025621f9 AC	209	};
025621f9 AC	210
029cfd6b TH	211	static struct ata_port_operations pacpi_ops = {
029cfd6b TH	212	.inherits = &ata_bmdma_port_ops,
9363c382	213	.qc_issue = pacpi_qc_issue,
029cfd6b TH	214	.cable_detect = pacpi_cable_detect,
029cfd6b TH	215	.mode_filter = pacpi_mode_filter,
025621f9 AC	216	.set_piomode = pacpi_set_piomode,
025621f9 AC	217	.set_dmamode = pacpi_set_dmamode,
887125e3	218	.prereset = pacpi_pre_reset,
025621f9 AC	219	.port_start = pacpi_port_start,
	220	};
	221
	222
	223	/**
	224	* pacpi_init_one - Register ACPI ATA PCI device with kernel services
	225	* @pdev: PCI device to register
	226	* @ent: Entry in pacpi_pci_tbl matching with @pdev
	227	*
	228	* Called from kernel PCI layer.
	229	*
	230	* LOCKING:
	231	* Inherited from PCI layer (may sleep).
	232	*
	233	* RETURNS:
	234	* Zero on success, or -ERRNO value.
	235	*/
	236
	237	static int pacpi_init_one (struct pci_dev pdev, const struct pci_device_id id)
	238	{
	239	static const struct ata_port_info info = {
c10f97b9	240	.flags = ATA_FLAG_SLAVE_POSS,
025621f9	241
14bdef98 EIB	242	.pio_mask = ATA_PIO4,
	243	.mwdma_mask = ATA_MWDMA2,
	244	.udma_mask = ATA_UDMA6,
025621f9 AC	245
	246	.port_ops = &pacpi_ops,
	247	};
	248	const struct ata_port_info *ppi[] = { &info, NULL };
05177f17 AC	249	if (pdev->vendor == PCI_VENDOR_ID_ATI) {
	250	int rc = pcim_enable_device(pdev);
	251	if (rc < 0)
	252	return rc;
	253	pcim_pin_device(pdev);
	254	}
1c5afdf7	255	return ata_pci_bmdma_init_one(pdev, ppi, &pacpi_sht, NULL, 0);
025621f9 AC	256	}
	257
	258	static const struct pci_device_id pacpi_pci_tbl[] = {
	259	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1},
	260	{ } /* terminate list */
	261	};
	262
	263	static struct pci_driver pacpi_pci_driver = {
	264	.name = DRV_NAME,
	265	.id_table = pacpi_pci_tbl,
	266	.probe = pacpi_init_one,
	267	.remove = ata_pci_remove_one,
58eb8cd5	268	#ifdef CONFIG_PM_SLEEP
025621f9 AC	269	.suspend = ata_pci_device_suspend,
025621f9 AC	270	.resume = ata_pci_device_resume,
8e2840e0	271	#endif
025621f9 AC	272	};
025621f9 AC	273
2fc75da0	274	module_pci_driver(pacpi_pci_driver);
025621f9 AC	275
	276	MODULE_AUTHOR("Alan Cox");
	277	MODULE_DESCRIPTION("SCSI low-level driver for ATA in ACPI mode");
	278	MODULE_LICENSE("GPL");
	279	MODULE_DEVICE_TABLE(pci, pacpi_pci_tbl);
	280	MODULE_VERSION(DRV_VERSION);