Yann E. MORIN [Mon, 2 Dec 2013 20:49:27 +0000 (21:49 +0100)]
docs/manual: limit the depth of the TOC in the HTML output
The current TOC level is set to 4, which does not mean 'a 4-level deep TOC',
but really means 'a TOC deep to the 4th level', with the first level being
level 0, which means we have:
12. Appendix
12.1. Makedev syntax documentation
12.2. Makeuser syntax documentation
12.3. Partition table layout description syntax
12.3.1. The global section
Properties for the global section
Which a bit too much. And yet, the fifth level is not shown, since we
don't have any! :-/
Limit the depth of the TOC to three levels, which is just enough to be
usefull, yet not cluttered by low-level titles.
Install syslogd/klogd to /sbin instead of /usr/sbin to really win over
busybox and avoid the ugly noise when booting without busybox installed.
Also drop uninstall hook and manpage installation.
Gustavo Zacarias [Thu, 28 Nov 2013 17:22:27 +0000 (14:22 -0300)]
util-linux: install PAM configuration files
Install PAM configuration files for su (with "su -" variant) and login
when the tools are enabled.
This finally fixes bug #5366 and now we can login with an util-linux
/bin/login.
The makeinfo/missing logic is botched leading to failures such as:
http://autobuild.buildroot.net/results/5f0/5f0e8f62be86b56813f5fc0510e83289ed2b0410/
Just disable documentation build the hard way.
Peter Korsgaard [Mon, 2 Dec 2013 12:11:31 +0000 (13:11 +0100)]
package: add rtptools
Notice that the license is quite special. It is basically MIT with the
difference that it only allows use for:
'research and educational purpose and without fee ... Use of this software
in whole or in parts for direct commercial advantage requires explicit
prior permission'
Yann E. MORIN [Sun, 1 Dec 2013 22:36:04 +0000 (23:36 +0100)]
package/rpi-firmware: bump for misc fixes and improvements
This fixes a few shortcomings in the boot firmware:
- emmc pll clock issues
- audio underruns and chirps
- unload of sensor drivers (?)
- missing config.txt no longer borks the boot
- lockups during long exposures on the camera
- YUV-to-texture fastpath for the camera
Thomas Petazzoni [Mon, 11 Nov 2013 16:47:34 +0000 (17:47 +0100)]
grub: improve help text with detailed instructions to install grub
These instructions should probaby go in the Buildroot manual, but at
this point, it's not clear in which section they should go. So in
order to not loose those notes, add them to the Grub help text.
Thomas Petazzoni [Mon, 11 Nov 2013 16:47:33 +0000 (17:47 +0100)]
grub: add option to configure the list of supported filesystems
Grub can be configured to enable or disable the filesystems supported
in the stage 2. In addition, there are filesystem specific stage
1.5. In order to save space and build time, we provide a new option
that allows to give a space-separated list of filesystems that Grub
should support.
We default to support FAT and ext2, since most of the other
filesystems are fairly unlikely to be used.
We use this option to:
1) Pass --enable-<fs> or --disable-<fs>, which enables/disables the
support of <fs> in Grub stage 2.
2) Install only the stage 1.5 that correspond to the selected
filesystems.
Thomas Petazzoni [Mon, 11 Nov 2013 16:47:30 +0000 (17:47 +0100)]
grub: sample menu.lst file improvements
Two improvements to the menu.lst file:
* Do not enforce any video mode, let the kernel use whatever it wants
as the default, or let the user customize it when needed.
* Use /dev/sda1 instead of /dev/hda1. Nowadays, most hard disk
controllers are handled using libata, and therefore the disks are
visible as /dev/sd<X>.
Thomas Petazzoni [Mon, 11 Nov 2013 16:47:28 +0000 (17:47 +0100)]
grub: support build on x86-64, and misc other improvements
This commit brings a number of improvements to the grub packaging:
* It builds grub with the host compiler, which is needed so that we
can build a 32 bits grub even if the target architecture is
x86-64. To make sure we have a host compiler capable of generating
32 bits code, grub now selects the BR2_HOSTARCH_NEEDS_IA32_COMPILER
option. Building with the host compiler is done by cheating and
passing $(HOST_CONFIGURE_OPTS) in GRUB_CONF_ENV.
* Some additional CFLAGS are added to make sure grub builds properly
with modern compilers (-O0, --build-id=none, -fno-stack-protector).
* Removal of the GRUB_INSTALL_STAGING_CMDS which were not used, since
GRUB_INSTALL_STAGING was not set to YES.
* Installation of the "grub" binary in $(HOST_DIR) instead of
$(TARGET_DIR) since it's actually used only on the host to install
grub into an image or device.
* Removal of the grub uninstall commands, since they are generally
considered useless.
Thomas Petazzoni [Mon, 11 Nov 2013 16:47:25 +0000 (17:47 +0100)]
core: add BR2_HOSTARCH_NEEDS_IA32_COMPILER option
Some bootloaders (such as Grub) need to be built for x86 (i.e IA32)
even if the target architecture is x86-64. However, when the target
architecture is x86-64, the cross-compiler generated by Buildroot is
not able to generate 32 bits code.
To solve this, we will rely on the host compiler being a x86 + x86-64
compiler. Therefore, this commit introduces the
BR2_HOSTARCH_NEEDS_IA32_COMPILER option, which tells the dependency
checking logic to verify that the host compiler is indeed capable of
building x86 32 bits code.
Samuel Martin [Sun, 1 Dec 2013 19:13:38 +0000 (20:13 +0100)]
crda: fix static build failure
libnl-3 uses threads and this isn't accounted for in crda or
libnl-3*.pc files since crda doesn't use pkg-config.
Since linking order matters for static scenarios also throw in -lnl-3
into NLLIBS first since it gets appended to in crda makefiles to add
libnl-3.
libgcrypt depends on libgpg-error and this isn't accounted for in
crda makefile, but it is in libgcrypt-config script (in the correct
order for static linking), so set LDLIBS calling this script.
Ivan Sergeev [Tue, 19 Nov 2013 02:10:46 +0000 (18:10 -0800)]
dbus-python: select pyexpat dependency
dbus-python requires xml.parsers.expat, which is provided by the pyexpat
module. This patch enables the pyexpat module as a dependency when dbus-python
is selected.
libiscsi: Call autoreconf to use buildroot's libtool
Use updated libtool from buildroot to fix MIPS64/n64 build problems
http://autobuild.humanoidz.org/results/a9a/a9aa506a591581e413dc38c53d0e56bec5970634/build-end.log
libtool: Apply upstream patch to set correct linkage on MIPS64
This libtool change ensures that ld uses the right machine emulation file,
which will allow to fix several MIPS64 n64 link failures, such as the one
currently visible on the libiscsi package. Packages affected by this
problem will have to use <pkg>_AUTORECONF = YES to benefit from this libtool
fix, until they are fixed upstream.
qt5base fails to compile on MIPS64 BigEndian n64 platforms because there
are multiple calls to some functions that are disabled. Since every Qt5
package depends on qt5base we can disable Qt5 entirely. This is a quick
fix for the next release. In the meantime, a proposed patch to fix this
problem has already been sent to Qt:
Gustavo Zacarias [Fri, 29 Nov 2013 14:25:43 +0000 (11:25 -0300)]
hostapd: fix static build failure
libnl-3 uses threads and this isn't accounted for in hostapd (or
libnl-3*.pc files for that matter - hostapd doesn't use pkg-config
anyway).
Since linking order matters for static scenarios also throw in -lnl-3
into LIBS first since it gets appended to in hostapd makefiles to add
libnl-3.
Fatih Aşıcı [Wed, 20 Nov 2013 12:17:41 +0000 (14:17 +0200)]
qt5base: use -device-option to set mkspec variables
Simplify our custom qmake.conf:
- Include linux_device_{pre,post}.conf to inherit common device
configuration.
- Do not add $(STAGING_DIR)/usr/include to include path. It is
redundant.
In additon to the simplification of code, this change is a preparation
to solve problems occurring when QMAKE_CXX is prepended with ccache path.
Upstream patch is needed by configure to parse device options correctly.
Another upstream patch is needed to remove ARM specific parts from
linux_device_post.conf.
Gustavo Zacarias [Wed, 27 Nov 2013 18:09:27 +0000 (15:09 -0300)]
configs/qemu_mips64_malta: update config
Slim down the kernel config, switch to ext4 (with ext2/3 support),
enable N32 & O32 ABI compatibility for extra testing goodness and enable
keyboard & mouse support.
This package selects BR2_PACKAGE_QT_SCRIPT which is not supported on
certain platforms. To prevent this behaviour we use the same solution as
we applied for BR2_PACKAGE_QT_SCRIPT
There is no support for certain platforms in QtScript right now, so
buildroot upstream suggested to disable the possibility of enabling
QtScript on those platforms as a quick fix for the 2013.11 release:
QtScript doesn't build because it uses JavaScriptCore, so we re-use the
existing BR2_PACKAGE_QT_ARCH_SUPPORTS_WEBKIT option which already lists
which platforms are supported by JavaScriptCore in Qt4.
In addition, a proposed fix to add support for MIPS64 has already been
sent to Qt:
Gustavo Zacarias [Thu, 28 Nov 2013 17:39:00 +0000 (14:39 -0300)]
wpa_supplicant: define BINDIR for systemd/dbus service files
BINDIR is used to point systemd/dbus service files to the correct binary
path where wpa_supplicant resides.
So define it to avoid the default /usr/local path that doesn't work.
Solves bug #6704
lvm2: replace !BR2_PACKAGE_LVM2_DMSETUP_ONLY by BR2_PACKAGE_LVM2_STANDARD_INSTALL
BR2_PACKAGE_LVM2_DMSETUP_ONLY is a "negative" option that disables
build and install of part of the suite. This option cannot be unselected
by other config options, which gives a problem for BR2_PACKAGE_UDISKS_LVM2:
it needs BR2_PACKAGE_LVM2_APP_LIBRARY, which requires the full suite.
Therefore, replace the negative BR2_PACKAGE_LVM2_DMSETUP_ONLY by a positive
BR2_PACKAGE_LVM2_STANDARD_INSTALL. To make sure that existing defconfigs
keep working, the new option defaults to y unless the legacy
BR2_PACKAGE_LVM2_DMSETUP_ONLY was selected.
Simon Dawson [Thu, 28 Nov 2013 14:24:55 +0000 (14:24 +0000)]
connman: remove defunkt configuration options
We are carrying support for a couple of configuration options which
are no longer present in connman. Specifically:
; threads: vestigial configuration option needed for defunkt WiMAX plugin
; ntpd: plugin no longer present in connman
According to Will Newton, function profiling will only be added in the
next version of the AArch64 Linaro toolchain. This indicates it is a
rather new feature in AArch64, so for the moment, just disallow
profiling on AArch64. We can revise this later, when this feature has
been made available in Linaro toolchains, and official gcc releases
(for internal toolchain support).
Gustavo Zacarias [Wed, 27 Nov 2013 13:00:41 +0000 (10:00 -0300)]
apr: needs mmu
Uses fork() in apr_proc_fork() which is used by almost all the packages
that use apr (log4cxx, subversion).
apr-util doesn't use fork or apr_proc_fork but it's of no use alone.
[Peter: also hide log4cxx comment if !BR2_USE_MMU] Signed-off-by: Gustavo Zacarias <[email protected]> Signed-off-by: Peter Korsgaard <[email protected]>
Gustavo Zacarias [Wed, 27 Nov 2013 12:53:04 +0000 (09:53 -0300)]
apr: fix threading lib detection
apr's configure doesn't try to guess which library is needed for
threading when cross-compiling hence this is never reflected in
apr-1-config, leading to a build failure such as:
http://autobuild.buildroot.net/results/035/035a00de0a56be00559767ba822a396ddc18a9fb/
Peter Korsgaard [Wed, 27 Nov 2013 21:29:05 +0000 (22:29 +0100)]
binutils: fix static linking
pkg-autotools.mk already handles static/shared linking, so no need to
explictly force it. Worse even, the build fails with BR2_PREFER_STATIC_LINK
as we end up calling libtool with --static when it tries to link the .so,
breaking the build:
../ld: attempted static link of dynamic object
`../opcodes/.libs/libopcodes.so'
collect2: error: ld returned 1 exit status
Gustavo Zacarias [Wed, 27 Nov 2013 12:06:19 +0000 (09:06 -0300)]
dropwatch: adjust LDFLAGS
Add more library links into LDFLAGS.
-lncurses because readline uses it (missing _tputs and others).
-lpthread for missing _pthread_rwlock_unlock and others.
-lm for missing _rint.
Fixes:
http://autobuild.buildroot.net/results/6b1/6b1f4f2167d8aca0d73dc0e66fd2e1704c821c61/
Gustavo Zacarias [Tue, 26 Nov 2013 12:51:04 +0000 (09:51 -0300)]
php: fix iconv related build failure
Fix a rare edge build failure when iconv is enabled, easily reproduced
in a debian chroot with an aarch64 external toolchain with iconv +
xmlrpc support enabled with a php cgi + cli target.
Should solve bug #6500.
projects / buildroot-mgba.git / log