Romain Naour [Sun, 28 Jun 2020 20:16:12 +0000 (22:16 +0200)]
package/glibc: disable Werror for gcc 10 build
Currently glibc 2.30 is build by default with Werror enabled but it
has only been tested with compiler version available at the time of
the release [1] (gcc 6.2 up to gcc 9.2.1). It's recommended to use
those version with glibc 2.30.
For the same reason why we remove Werror in packages's compiler
flags. Building with Werror is not bulletproof when we start
using a newer compiler that introduce new warnings.
This is the case here with gcc 10, as reported by Yegor Yefremov
[2].
Fixing compiler warnings would require backporting many patches [3]
not even backported by Glibc maintainers to the 2.30 stable
branch. Instead, disable Werror by using --disable-werror.
Most (if not all) gcc 10 warnings will be fixed with Glibc 2.31.
Francois Perrad [Mon, 29 Jun 2020 07:16:56 +0000 (09:16 +0200)]
package/dropbear: bump to version 2020.80
remove merged patches.
LICENSE diff:
- Copyright (c) 2002-2015 Matt Johnston
+ Copyright (c) 2002-2020 Matt Johnston
- LibTomCrypt and LibTomMath are written by Tom St Denis, and are Public Domain.
+ LibTomCrypt and LibTomMath are written by Tom St Denis and others, see
+ libtomcrypt/LICENSE and libtommath/LICENSE.
boost/detail/endian.hpp has been marked as deprecated since boost 1.69.0.
This file and boost/predef/detail/endian_compat.h are no more available.
This patch suppress this header in some file, where not needed and move
to correct header and new constants. It's retrocompatible for at least all boost release > 1.69.0
Brandon Maier [Fri, 26 Jun 2020 15:59:56 +0000 (10:59 -0500)]
uboot: zynqmp: Support loading a PMU config
Before now, U-Boot SPL could only load the Platform Management Unit
(PMU) by patching the board-specific pm_cfg_obj.c file into the generic
PMU firmware, but that then requires generating a new PMU firmware for
every board configuration. To fix that, Luca Ceresoli added support to
U-Boot to load the pm_cfg_obj[1].
Like the PMU firmware, we need a way to pass the PMU cfg to U-Boot
during build. U-Boot only accepts the binary format of the cfg, so we
must convert the source file with the tool provided with U-Boot.
John Keeping [Fri, 26 Jun 2020 15:49:27 +0000 (16:49 +0100)]
toolchain/toolchain-wrapper: let recent GCC handle SOURCE_DATE_EPOCH
When using precompiled headers, changing any macros defined on the
command line will invalidate the precompiled header. With
toolchain-wrapper adding __DATE__ and __TIME__, any commits to Buildroot
will invalidate incremental builds regardless of whether the precompiled
header actually uses those values (affecting _OVERRIDE_SRCDIR).
GCC-7 and later support SOURCE_DATE_EPOCH and use it to define __DATE__
and __TIME__ internally, avoiding any impact on precompiled headers.
Disable the custom handling in toolchain-wrapper if GCC is version 7 or
newer.
Stéphane Veyret [Fri, 26 Jun 2020 10:41:16 +0000 (12:41 +0200)]
package/rpi-firmware: fix startup file names
When booting, a Raspberry Pi will load the appropriate start files,
depending on the provided configuration. For example, if the config.txt
file contains ’gpu_mem=16’ the board will automatically load the
cut-down startup files (start_cd.elf and fixup_cd.dat on non-Rpi4).
Unfortunately, even when the appropriate version is selected in the
configuration menu, if the rpi-firmware makefile takes the good files,
it renames them to non-qualified, i.e. start.elf and fixup.dat. But as
these are not the files searched by the Raspberry Pi, the board will not
start.
This patch will set the names of the files to load as constant in the
config.txt file. This guarantees that the rpi firmware blobs do not take
any other corner-case decision based on any other as-yet unknown
conditions.
This eases the maintenance, as only the names of the source files
matter; the destination filenames are constants, and so are the
filenames in config.txt.
Fixes: #13026 Signed-off-by: Stéphane Veyret <[email protected]>
[[email protected]:
- very minor fix in commit title
- drop the non-conditional macro and move its content into
RPI_FIRMWARE_INSTALL_IMAGES_CMDS
] Signed-off-by: Yann E. MORIN <[email protected]>
Maxim Cournoyer [Thu, 4 Jun 2020 20:14:26 +0000 (16:14 -0400)]
packages/pkg-download.mk: fix file locking over NFS
BSD style locks such as implemented by flock are translated to POSIX
advisory file locks (implemented by the fcntl system call on Linux). It
is not possible to lock a directory using POSIX advisory file locks.
Hence, the lock strategy used by Buildroot doesn't work when used over
NFS.
Using flock on a simple file works correctly though, so use a '.lock'
file inside the download directory instead. If the lockfile does not
exist, flock will create it (in a race-free fashion).
Romain Naour [Tue, 5 May 2020 18:43:02 +0000 (20:43 +0200)]
package/sdl2: remove sdl2-config.cmake
We are using autotools build system for sdl2, so the sdl2-config.cmake
include path are not resolved like for sdl2-config script [1].
Remove sdl2-config.cmake file and avoid unsafe include path if this
file is used by a cmake based package.
This trigger an issue with ogre 1.12.6 package that replaced
FindSDL2.cmake by sdl2-config.cmake [2].
Jan Kiszka [Tue, 14 Jan 2020 20:55:21 +0000 (21:55 +0100)]
package/xenomai: add support to download from a custom git tree
Soem versions are tagged, but not tarballed, so we need to be able to
retrieve them from git.
Usually, we do not have a default value for the repository, but unlike
for the kernel or the various bootloaders, the most prominent repository
for Xeniomai is upstream's official one (for the reason above, amongst
others), so we use that as a default.
Yann E. MORIN [Tue, 14 Jan 2020 20:55:19 +0000 (21:55 +0100)]
package/xenomai: move the version setting to Kconfig
The xenomai version is decided in Kconfig, but the default value is
set in the .mk. This is unlike the other packages that have a version
choice (like linux, uboot...).
Move the value into Config.in.
This paves the way to using other custom sources, like from a git tree.
Note however that any existing configuration will need to be adapted to
the new settings. Adding legacy handling is non-trivial, so manual
intervention will be required.
Romain Naour [Mon, 30 Dec 2019 13:36:40 +0000 (14:36 +0100)]
board/qemu/sh4-r2d: fix sh4 kernel bug with binutils 2.33
Remove the binutils patch reverting [1] that triggers a sh4 kernel bug
with binutils >= 2.33. Instead, add two kernel patches provided by
Alan Modra [2] that fix alignment of rodata.
Giulio Benetti [Wed, 24 Jun 2020 16:06:40 +0000 (18:06 +0200)]
package/libnss: fix build failure on microblaze
By mistake seed.o has been added to public library too, but this way its
dependencies are not taken into account(stubs.o), this way build fails
complaining on missing functions from stubs.o file. Let's fix it by
adding upstream patch:
https://hg.mozilla.org/projects/nss/rev/f46fca8ced7fca6aa6de60e3170b2a3b6b2df565
Romain Naour [Mon, 8 Jun 2020 22:13:47 +0000 (00:13 +0200)]
package/gcc: switch to gcc 9.x as the default
Even if gcc 8 is still maintained for some time (gcc 8.5 is pending),
switch to gcc 9.x since it has been released since 2019-05-03 and
gcc 10.x is available since 2020-05-07.
We have been having toolchains in the autobuilders with gcc
9.x for a while, so the vast majority of the problems should have
already been solved.
With boost >= 1.73, placeholders must be qualified by using the full namespace.
Without the namespace, the build fails with:
gqrx-2.12.1/src/dsp/rds/parser_impl.cc: In constructor 'gr::rds::parser_impl::parser_impl(bool, bool)':
gqrx-2.12.1/src/dsp/rds/parser_impl.cc:42:72: error: '_1' was not declared in this scope
set_msg_handler(pmt::mp("in"), boost::bind(&parser_impl::parse, this, _1));
This update brings in a few build fixes only. In particular the
one for EGL implementations which use oddball definitions of the
EGLNativeDisplayType type might be needed for some configurations.
package/libnids: disable libnet only if not available
libnids can be built against an existing libnet lib,
take advantage of that.
Unfortunately, pkg-config is not available for libnet,
so configure --with-libnet is our only option at the
moment.
--with-libnet expects a build directory,
not an installation path like in our context.
We use --with-libnet=yes to skip tests that would fail.
In this situation, 'LIBNET' goes undefined, so we
need to define it ourselves.
This works because we make sure -lnet is installed
prior anything related to libnids.
Ash Charles [Tue, 23 Jun 2020 00:25:15 +0000 (20:25 -0400)]
pru-software-support: bump to latest version 5.7.0
Update to the latest version of the PRU software support [1].
There are minor changes to the license file mostly dates and versions --
notably pulling in several Linux kernel 5.4 header files in place of the
4.19 versions. As there is no longer a dependency on the kernel types.h
header, there's no longer a GPL-2.0 licensed component.
Also drop the useless comment that just repeats the URL.
Fabrice Fontaine [Tue, 23 Jun 2020 20:31:24 +0000 (22:31 +0200)]
package/libnpupnp: new package
npupnp (new pupnp or not pupnp ?) is an UPnP library derived from the
venerable pupnp (https://github.com/pupnp/pupnp), based on its 1.6.x
branch (around 1.6.25).
Fabrice Fontaine [Tue, 23 Jun 2020 20:35:26 +0000 (22:35 +0200)]
package/nginx: add stream split clients option
stream split clients module has been added in version 1.11.3 with
https://github.com/nginx/nginx/commit/6c2b086d0e10cab769f9321998dcb631796ec49b
and is enabled by default, add an option to be able to disable it
Bartosz Bilas [Tue, 23 Jun 2020 18:20:08 +0000 (20:20 +0200)]
package/irrlicht: add patch to fix libraries linking
This patch fix the irrlicht makefile which contains the paths
that point to the host system libraries that are not used and
are not available in Buildroot what's unsafe for cross-compilation.
In addition it fixes linking to the X11 libraries and the following errors:
/home/bartekk/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-gnueabihf/9.2.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/bartekk/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libIrrlicht.so: undefined reference to `XSetSelectionOwner'
/home/bartekk/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-gnueabihf/9.2.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/bartekk/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libIrrlicht.so: undefined reference to `glXGetProcAddress'
/home/bartekk/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-gnueabihf/9.2.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/bartekk/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libIrrlicht.so: undefined reference to `glXMakeCurrent'
/home/bartekk/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-gnueabihf/9.2.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/bartekk/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libIrrlicht.so: undefined reference to `XF86VidModeSetViewPort'
/home/bartekk/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-gnueabihf/9.2.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/bartekk/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libIrrlicht.so: undefined reference to `XF86VidModeSwitchToMode'
/home/bartekk/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-gnueabihf/9.2.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/bartekk/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libIrrlicht.so: undefined reference to `glClearDepth'
/home/bartekk/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-gnueabihf/9.2.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/bartekk/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libIrrlicht.so: undefined reference to `XGetVisualInfo'
/home/bartekk/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-gnueabihf/9.2.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/bartekk/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libIrrlicht.so: undefined reference to `XGrabKeyboard'
/home/bartekk/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-gnueabihf/9.2.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/bartekk/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libIrrlicht.so: undefined reference to `glMatrixMode'
Romain Naour [Tue, 23 Jun 2020 13:16:49 +0000 (15:16 +0200)]
package/gdb: fix gdb python support with python 3.8
CPython 3.8 has added a new Syntax Warning that print
a waring at runtime while unsing gdb python support.
$ gdb -ex "python import os"
/usr/share/gdb/python/gdb/command/prompt.py:48: SyntaxWarning: "is not" with a literal. Did you mean "!="?
if self.value is not '':
/usr/share/gdb/python/gdb/command/prompt.py:60: SyntaxWarning: "is not" with a literal. Did you mean "!="?
if self.value is not '':
libnids can make use of libglib2 for multi-threading support, so use
that when available.
The configure.in script is flawed: passing either --enable-libglib or
--disabel-libglib will both disable support for libglib. Only when
neither is passed will the autodetection test be executed, at which
point (hopefully) libglib2 will be enabled if found.
So, unlike our usual practice, we can;t explcitly enable it; we can only
explicitly disable it, and rely on autodetection to enable it.
Signed-off-by: Guillaume W. Bres <[email protected]>
[[email protected]:
- add missing dependency on libglib2
- expand commit log to explain why we don't --enable-libglib
- add a simmilar blurb in the .mk
- fix condition, use positive logic since we have an else-clause
] Signed-off-by: Yann E. MORIN <[email protected]>
Giulio Benetti [Wed, 10 Jun 2020 16:16:01 +0000 (18:16 +0200)]
package/apitrace: fix microblaze build failure
Apitrace is affected by Gcc Bug 68485 that has already been worked
around, but after version bumping, CMakeLists.txt adds -O2 to
CMAKE_C_FLAGS_RELWITHDEBINFO that is in order appended to
CMAKE_C_FLAGS, making -O0 end appending to fail. To prevent this we
need to avoid CMAKE_C_FLAGS_RELWITHDEBINFO to be appended to
CMAKE_C_FLAGS, so let's do the same as flare-engine package that set
CMAKE_BUILD_TYPE to a fake build type called "buildroot", this way -O2
won't be appended after -O0 and work around restart to work as
expected.
package/freescale-imx/firmware-imx: bump version to 8.6
This package needed to be updated to be aligned with NXP BSP
5.4.3_1.0.0. It only updates the i.MX8 VPU firmware files.
The license files have changed due to:
- update to LA_OPT_NXP_Software_License v10 December 2019
- addition of Crank, EmSA and TARA Systems restrictions
Signed-off-by: Sébastien Szymanski <[email protected]> Reviewed-by: Gary Bisson <[email protected]>
[Thomas: extend commit log according to details provided by Gary
Bisson] Signed-off-by: Thomas Petazzoni <[email protected]>
Fabrice Fontaine [Mon, 22 Jun 2020 19:31:13 +0000 (21:31 +0200)]
package/nginx: add stream geo option
stream geo module has been added in version 1.11.3 with
https://github.com/nginx/nginx/commit/bb790f5d30025b634673fcb9939ded5b0c60301f
and is enabled by default, add an option to be able to disable it
Fabrice Fontaine [Mon, 22 Jun 2020 19:31:12 +0000 (21:31 +0200)]
package/nginx: add stream return option
stream return module has been added in version 1.11.2 with
https://github.com/nginx/nginx/commit/a7c6f8c1d7cb817bf84b639ee0933f9ffed05275
and is enabled by default, add an option to be able to disable it
Fabrice Fontaine [Mon, 22 Jun 2020 19:31:11 +0000 (21:31 +0200)]
package/nginx: add stream map option
stream map module has been added in version 1.11.3 with
https://github.com/nginx/nginx/commit/05db6ddfa1ca120c1c348cc750acded2a01b090a
and is enabled by default, add an option to be able to disable it
Yann E. MORIN [Sun, 21 Jun 2020 20:31:58 +0000 (22:31 +0200)]
toolchain/toolchain-wrapper.c: extend the list of unsafe paths
On some legacy systems, the X11 headers and libs are in /usr/X11R66/include
and /usr/X11R66/lib, and of course, some packages are trying to be smart
and use those paths (even when they do not exist).
Add those to the list of unsafe paths to check in the toolchain wrapper.
Libnids is a C based networking library, part of networking intrusion
detection tools. It can watch network traffic & provide informations.
Signed-off-by: Guillaume W. Bres <[email protected]>
[Thomas:
- only needs libpcap as a mandatory dependency
- add patch to fix libpcap detection
- pass install_root= at installation time
- drop glibc dependency, it builds fine with uclibc] Signed-off-by: Thomas Petazzoni <[email protected]>
9adede5 Bumped version to 1.9.12 7487642 Merge pull request #40 from PrinterFranklin/fix_memory_leak cbef34b fix a memory leak in havege_destroy 02674ae Updated ChangeLog 1ce2092 Update README.md b77e7db Create README.md f5bd6fa Updated version to v1.9.11 68b1d84 Merge branch 'master' of https://github.com/jirka-h/haveged fb12bb3 updated fedora.spec b162c91 Merge pull request #35 from eworm-de/private-tmp b839803 Merge pull request #34 from Chocobo1/gh_action 4a0a008 Replace @SBIN_DIR@ in haveged.service file with actual path c216a6f Moved haveged.spec to fedora.spec 2098470 fix ordering cycle with private tmp 7cd68e1 Add GitHub Actions continuous integration script ebe97f0 Fixed time format
Stefan Sørensen [Thu, 11 Jun 2020 05:31:51 +0000 (07:31 +0200)]
package/gnutls: security bump to 3.6.14
Fixes the following security issue:
* CVE-2020-13777: It was found that GnuTLS 3.6.4 introduced a
regression in the TLS protocol implementation. This caused the TLS
server to not securely construct a session ticket encryption key
considering the application supplied secret, allowing a MitM
attacker to bypass authentication in TLS 1.3 and recover previous
conversations in TLS 1.2
Peter Korsgaard [Sun, 21 Jun 2020 20:18:48 +0000 (22:18 +0200)]
package/intel-microcode: security bump to version 20200616
Contains mitigations for the Special Register Buffer Data Sampling
(CVE-2020-0543), Vector Register Sampling (CVE-2020-0548) and L1D
Eviction Sampling (CVE-2020-0549) hardware vulnerabilities.
For more details, see the advisories:
https://www.intel.com/content/www/us/en/security-center/advisory/intel-sa-00320.html
https://www.intel.com/content/www/us/en/security-center/advisory/intel-sa-00329.html
Adjust the license hash for a change of copyright year:
-Copyright (c) 2018-2019 Intel Corporation.
+Copyright (c) 2018-2020 Intel Corporation.
Bernd Kuhls [Sat, 20 Jun 2020 21:34:01 +0000 (23:34 +0200)]
package/ffmpeg: bump version to 4.3
Add a patch to fix build without ssse3.
Update the license hash due to various changes since August 2019 [0]:
- some files were relicensed from GPL-2.0+ to LGPL-2.1+; no impact on
the licensing information;
- clarification about the licensing when linked with external
libraries, which now requires passing --enable-version3; Buildroot
is not concerned, because it passes --disable-version3;
- various clarification about applicable licensing terms.
projects / buildroot-mgba.git / log