configs/qemu_arm_ebbr: linux needs host-openssl

[buildroot-mgba.git] / configs / raspberrypi2_defconfig

diff --git a/configs/raspberrypi2_defconfig b/configs/raspberrypi2_defconfig
index b523a4ac0ea35fa8211e95a5f08fdefd1b222ffc..30b7ff9fdec1b7acaaba7e0816b41d5c3ae159e8 100644 (file)
--- a/configs/raspberrypi2_defconfig
+++ b/configs/raspberrypi2_defconfig
@@ -3,23 +3,48 @@ BR2_cortex_a7=y
 BR2_ARM_EABIHF=y
 BR2_ARM_FPU_NEON_VFPV4=y
 
 BR2_ARM_EABIHF=y
 BR2_ARM_FPU_NEON_VFPV4=y
 

-BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
-BR2_TOOLCHAIN_BUILDROOT_CXX=y
+# patches
+BR2_GLOBAL_PATCH_DIR="board/raspberrypi/patches"
+BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
+
+BR2_SYSTEM_DHCP="eth0"

 
 

-BR2_TARGET_GENERIC_GETTY_PORT="tty1"
+# Linux headers same as kernel, a 6.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y

 
 

-# Lock to 3.19 headers as the RPi2 kernel is based off the 3.19 branch
-BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.19"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_19=y
+BR2_TOOLCHAIN_BUILDROOT_CXX=y

 
 BR2_LINUX_KERNEL=y
 
 BR2_LINUX_KERNEL=y

-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="23c76b7f608e51258c6fca02aebeb5d588583149"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,576cc10e1ed50a9eacffc7a05c796051d7343ea4)/linux-576cc10e1ed50a9eacffc7a05c796051d7343ea4.tar.gz"

 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"

-BR2_LINUX_KERNEL_ZIMAGE=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2709-rpi-2-b broadcom/bcm2710-rpi-2-b"
+
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y

 
 

-# Install the DTB files, as the RPi2 uses the Device Tree

 BR2_PACKAGE_RPI_FIRMWARE=y
 BR2_PACKAGE_RPI_FIRMWARE=y

-BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS=y
+BR2_PACKAGE_RPI_FIRMWARE_BOOTCODE_BIN=y
+BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI=y
+BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypi/config_default.txt"
+# BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS is not set
+
+# Required tools to create the SD image
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+
+# Filesystem / image
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi2/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi2/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y