configs/qemu_arm_ebbr: linux needs host-openssl

[buildroot-mgba.git] / configs / raspberrypi2_defconfig

diff --git a/configs/raspberrypi2_defconfig b/configs/raspberrypi2_defconfig
index 118efab6cca6717a1425aef74821b07564225d17..30b7ff9fdec1b7acaaba7e0816b41d5c3ae159e8 100644 (file)
--- a/configs/raspberrypi2_defconfig
+++ b/configs/raspberrypi2_defconfig
@@ -3,24 +3,30 @@ BR2_cortex_a7=y
 BR2_ARM_EABIHF=y
 BR2_ARM_FPU_NEON_VFPV4=y
 
-BR2_TOOLCHAIN_BUILDROOT_CXX=y
+# patches
+BR2_GLOBAL_PATCH_DIR="board/raspberrypi/patches"
+BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
 
 BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 6.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
+
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="9126e25b0934bd7bd843763310ea4b34c6e139d0"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,576cc10e1ed50a9eacffc7a05c796051d7343ea4)/linux-576cc10e1ed50a9eacffc7a05c796051d7343ea4.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
-
-# Build the DTB from the kernel sources
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2709-rpi-2-b"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2709-rpi-2-b broadcom/bcm2710-rpi-2-b"
+
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 
 BR2_PACKAGE_RPI_FIRMWARE=y
+BR2_PACKAGE_RPI_FIRMWARE_BOOTCODE_BIN=y
+BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI=y
+BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypi/config_default.txt"
 # BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS is not set
 
 # Required tools to create the SD image
@@ -31,6 +37,14 @@ BR2_PACKAGE_HOST_MTOOLS=y
 # Filesystem / image
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi2/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi2/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y