* sparc-dis.c (v9_priv_reg_names): Add "gl" entry.
(v9_hpriv_reg_names): New table.
(print_insn_sparc): Allow values up to 16 for '?' and '!'.
New cases '$' and '%' for read/write hyperprivileged register.
* sparc-opc.c (sparc_opcodes): Add new entries for UA2005
window handling and rdhpr/wrhpr instructions.
[gas]
* config/tc-m32c.h (md_apply_fix): Define to m32c_apply_fix.
(tc_gen_reloc): Don't define.
* config/tc-m32c.c (rl_for, relaxable): New convenience macros.
(OPTION_LINKRELAX): New.
(md_longopts): Add it.
(m32c_relax): New.
(md_parse_options): Set it.
(md_assemble): Emit relaxation relocs as needed.
(md_convert_frag): Emit relaxation relocs as needed.
(md_cgen_lookup_reloc): Add LAB_8_8 and LAB_8_16.
(m32c_apply_fix): New.
(tc_gen_reloc): New.
(m32c_force_relocation): Force out jump relocs when relaxing.
(m32c_fix_adjustable): Return false if relaxing.
[bfd]
* elf32-m32c.c (m32c_elf_howto_table): Add relaxation relocs.
(m32c_elf_relocate_section): Don't relocate them.
(compare_reloc): New.
(relax_reloc): Remove.
(m32c_offset_for_reloc): New.
(m16c_addr_encodings): New.
(m16c_jmpaddr_encodings): New.
(m32c_addr_encodings): New.
(m32c_elf_relax_section): Relax jumps and address displacements.
(m32c_elf_relax_delete_bytes): Adjust for internal syms. Fix up
short jumps.
Wu Zhou [Fri, 24 Feb 2006 07:26:10 +0000 (07:26 +0000)]
* f-exp.y: Symbol '%' is not used as the modulus operator in
Fortran. Delete this from Fortran expression.
It is now used by Fortran 90 and later to access the member
of derived type. Add this into Fortran expression.
* f-valprint.c (f_val_print): Add code to handle TYPE_CODE_STRUCT.
Print each elements in the derived type.
* f-typeprint.c (print_equivalent_f77_float_type): Add a parameter
level into the function definition to do indented printing. And
call fprintfi_filtered instead to do indented printing.
(f_type_print_base): Replace fprintf_filtered with the indented
version (fprintfi_filtered).
(f_type_print_base): Call indented print_equivalent_f77_float_type.
(f_type_print_base): Add code to handle TYPE_CODE_STRUCT. Print
the definition of the derived type.
Mark Kettenis [Tue, 21 Feb 2006 21:02:25 +0000 (21:02 +0000)]
* configure.ac: Introduce ---enable-werror, which adds -Werror to
the compiler command line. Enabled by default. Disable with
--disable-werror.
* configure regenerate.
* defs.h (directory_switch): Add prototype.
* main.c (captured_main): Use directory_switch() instead of
directory_command() to add directories from the -d switch.
* source.c (directory_switch): New function.
(add_path): Use buildargv() to parse spaces in filenames properly.
Strip multiple trailing '/' rather than just one.
* symfile.c (add_symbol_file_command): Use buildargv(), instead of
hand decoding the command line, to allow use of quotes and spaces.
(_initialize_symfile): Reorganize the help message for add-symbol-file
such that 'help files' shows a better message.
* symfile.c (generic_load): Use buildargv() and tilde_expand()
to parse file names with quoting, spaces and tildes properly.
(load_command): Quote all special characters before calling
target_load() such that buildargv() doesn't break file names.
(_initialize_symfile): Mention the load offset in the help for
the load command.
* remote-sim.c: Include readline.h.
(gdbsim_load): Use buildargv and tilde_expand() to parse file
names with quoting, spaces and tildes properly.
* target.h (target_load): Comment the parameters better.
* Makefile.in (remote_sim.o): Add readline.h dependency.
* Makefile.tpl (configure-stage[+id+]-[+prefix+][+module+],
all-stage[+id+]-[+prefix+][+module+], : Use $(current_stage) instead
of `cat stage_current`. Always provide the `r' and `s' variables.
(clean-stage[+id+]-[+prefix+][+module+]): Likewise, and make it into
a single shell execution.
(configure-[+prefix+][+module+], all-[+prefix+][+module+]): For
bootstrapped modules, make the stage1 module if the build was not
started yet, else build the current stage.
(all-host, all-target): Omit bootstrapped modules (if bootstrapping).
(all-build, all-host, all-target, [+make_target+]-host,
[+make_target+]-target): Do not use \-continued lines.
(target modules): Depend on stage_last, not all-gcc, if bootstrapping.
(current_stage, restrap, stage_last): New.
* win32_nat.c (cygwin_load_start): New variable.
(cygwin_load_end): Ditto.
(have_saved_context): Ditto.
(saved_context): Ditto.
(max_dll_name_len): Delete obsolete variable.
(do_win32_fetch_inferior_registers): Use context saved from cygwin1.dll if we
are in a cygwin signal rather than a windows signal.
(solib_symbols_add): Detect and store beginning and end of cygwin DLL if dll
being loaded is the cygwin DLL.
(register_loaded_dll): Remove calculation of max_dll_name_len.
(win32_clear_solib): Ditto.
(handle_load_dll): Delete obsolete variable. Remove unneeded call to
solib_add.
(handle_output_debug_string): Detect and store signal information sent by
Cygwin here.
(handle_exception): Silently pass on errors in the cygwin DLL. Return -1 on
first pass exception.
(win32_continue): Remove spurious clearing of continue_status.
(get_win32_debug_event): Deal differently first chance exception.
Fred Fish [Sun, 19 Feb 2006 20:53:34 +0000 (20:53 +0000)]
Reviewed and approved by Daniel Jacobowitz
2006-02-19 Fred Fish <[email protected]>
* gdb.base/pc-fp.exp (get_valueofx): Don't print environment
specifix hex value as part of results.
* gdb.base/shreloc.exp (get_msym_addrs): Ditto.
Fred Fish [Sat, 18 Feb 2006 20:47:54 +0000 (20:47 +0000)]
2006-02-16 Fred Fish <[email protected]>
* eval.c (evaluate_subexp_standard): For OP_TYPE, return
a non lval value zero, of the appropriate type, when avoiding
side effects.
* typeprint.c (ptype_eval): Remove function and declaration.
(ptype_command): Simplify to just a call to whatis_exp.
Fred Fish [Sat, 18 Feb 2006 20:45:01 +0000 (20:45 +0000)]
2006-02-17 Fred Fish <[email protected]>
* gdb.texinfo (Symbols): Update descriptions of 'whatis' and
'ptype' commands to reflect the fact that the only significant
difference between them is that ptype prints the complete type
description instead of just the name.
Fred Fish [Sat, 18 Feb 2006 20:01:17 +0000 (20:01 +0000)]
2006-02-16 Fred Fish <[email protected]>
* gdb.base/whatis.c: Define variables using typedefs char_addr,
ushort_addr, and slong_addr, so the typedefs are not optimized
away.
* gdb.base/whatis.exp: Add tests using type name for struct type,
union type, enum type, and typedef.
PR ld/2322
* elf.c (get_segment_type): New function.
(_bfd_elf_print_private_bfd_data): Use it.
(print_segment_map): New function.
(assign_file_positions_for_segments): Call print_segment_map
when there are not enough room for program headers.
PR binutils/2338
* dwarf2.c (check_function_name): New function.
(_bfd_dwarf2_find_nearest_line): Use check_function_name to
check if function is correct.
Alexandre Oliva [Tue, 14 Feb 2006 18:45:14 +0000 (18:45 +0000)]
* doublest.h (DOUBLEST): Use long double only if we can scan
it in. Undefine HAVE_LONG_DOUBLE otherwise.
(DOUBLEST_FORMAT): New.
* c-exp.y (parse_number): Use it.
* jv-exp.y (parse_number): Likewise.
* objc-exp.y (parse_number): Likewise.
* p-exp.y (parse_number): Likewise.
* varobj.c (free_variable): Silence type-punning warnings.
* tui/tui-data.h (struct tui_list): Change type of list member.
* tui/tui-data.c: Remove no-longer-needed type casts.
(source_windows): Silence type-punning warnings.
* tui/tui-stack.c, tui/tui-win.c, tui/tui-winsource.c: Likewise.
Nick Roberts [Tue, 14 Feb 2006 09:20:07 +0000 (09:20 +0000)]
Use more functions from gdb-ui.el.
(gdb-break-list-regexp): Match "what" field if present.
(gdb-stack-list-frames-regexp): Match "from" field if present.
(gdb-stack-list-frames-handler): Present output like "info
breakpoints" so regexps can be shared with gdb-ui
Bob Wilson [Tue, 14 Feb 2006 00:58:05 +0000 (00:58 +0000)]
* config/tc-xtensa.c (xg_add_opcode_fix): Number operands starting
from 1, not 0, in error messages.
(md_assemble): Simplify special-case check for ENTRY instructions.
(tinsn_has_invalid_symbolic_operands): Do not include opcode and
operand in error message.
Fred Fish [Mon, 13 Feb 2006 10:41:26 +0000 (10:41 +0000)]
Reviewed and approved by Jim Blandy
2006-02-12 Fred Fish <[email protected]>
* gdb.base/scope.exp (test_at_main): Use gdb_test_multiple
to handle cases where it takes two "next" commands to skip
past the init call.
projects / binutils.git / log