Per Bothner [Mon, 31 Aug 1992 03:34:15 +0000 (03:34 +0000)]
* gprof.h, gprof.c, printfgprof.c: Add support for two
output styles: The default is similar to the old FSF gprof,
while -T sets the variable bsd_style_output, which causes
output matching Berkeley's gprof. The biggest differences
are that with the FSF style output, the flat profile comes
before the call graph; numbers come before explanations;
and there is less gratuitous white space.
* gprof.h, gprof.c, printfgprof.c: New discard_underscores
variable causes discarding of initial underscores when
printing symbol names. It is set unless there is a "main"
symbol (without an underscore).
* printfgprof.c: New function printnameonly(), called
by printname(). It handles stripping of initial '_',
as well as C++ name-demangling.
* gprof.callg, gprof.flat, make-c-prog.awk: Removed.
It is just as convenient to edit blurbs.c directly.
* Makefile.in: Removed rule for making blurbs.c.
* blurbs.c: This is now a true source file (as opposed
to being generated from gprof.callg and gprof.flat).
Change style to use one long string literal, instead of
one literal per output line. Add FSF-style blurb for call graph.
Per Bothner [Mon, 31 Aug 1992 01:23:24 +0000 (01:23 +0000)]
* cplus-dem.c, demangle.h: Moved to ../libiberty and ../include,
respectively, so same demangler can be used by other programs.
* Makefile.in: Remove demangler stuff.
* Makefile.in (depend): Pass -I../readline (needed for main.c).
* demangle.c (_initialize_demangler): Tell demangler which
CPLUS_MARKER to assume.
Per Bothner [Mon, 31 Aug 1992 01:11:18 +0000 (01:11 +0000)]
* Makefile.in: Bump to versions 1.97.90.
* cplus-dem.c: Removed. Was nowhere used - and if some
programs are changed to to demangling should now use the
versions in libiberty.
Per Bothner [Mon, 31 Aug 1992 00:57:03 +0000 (00:57 +0000)]
* demangle.h: New file, moved from ../gdb. Made independent
of gdb. Allow demangling style option to be passed as a
parameter to cplus_demangle(), but using the
current_demangling_style global as the default.
* breakpoint.c (fixup_breakpoints): Re-kludge to IBM6000_TARGET.
* buildsym.c, rs6000-xdep.c, rs6000-tdep.c, tm-rs6000.h,
xcoffexec.c, xcoffread.c: Rename aixcoff to xcoff everywhere.
* printcmd.c (print_frame_args): Remove an RS/6000 dependency.
* stabsread.c (define_symbol): Remove RS/6000 dependencies.
* tm-rs6000.h (ATTACH_DETACH): Remove: host-dependent.
(PTRACE_ATTACH, PTRACE_DETACH): Remove: host-dep.
(NO_SINGLE_STEP): Add, target-dependent.
(loadinfotextindex): Lowercase, remove "aix_".
* xm-rs6000.h: Add <sys/ptrace.h> for infptrace.c.
(NO_SINGLE_STEP): Remove, target-dependent.
* xcoffexec.c (vmap_symtab): Cleanup #if 0'd code.
* xcoffread.c: Only build file if RS/6000 native GDB.
(build_function_symbol): Remove #if 0'd code.
* rs6000-tdep.c: Cleanup. Add static fn protos.
Use CORE_ADDR for addresses throughout. Make void fns void.
(pop_dummy_frame): Add FIXME about bogosity of design here.
(rs6000_struct_return_address): Ditto.
(frameless_function_invocation, frame_get_cache_fsr,
frame_initial_stack_address, xcoff_relocate_symtab,
xcoff_init_loadinfo, free_loadinfo, xcoff_add_toc_to_loadinfo,
add_text_to_loadinfo, find_toc_address): Move from xdep file.
Use CORE_ADDRs. Change identifiers to lowercase.
* rs6000-xdep.c: Make whole file conditional on native RS/6000,
supplying dummy routines if non-native. Add prototype for
static exec_one_dummy_insn. Move a mess of functions to
rs6000-tdep.c (as above). Remove #if 0'd code.
* breakpoint.c (fixup_breakpoints): Re-kludge to IBM6000_TARGET.
* buildsym.c, rs6000-xdep.c, rs6000-tdep.c, tm-rs6000.h,
xcoffexec.c, xcoffread.c: Rename aixcoff to xcoff everywhere.
* printcmd.c (print_frame_args): Remove an RS/6000 dependency.
* stabsread.c (define_symbol): Remove RS/6000 dependencies.
* tm-rs6000.h (ATTACH_DETACH): Remove: host-dependent.
(PTRACE_ATTACH, PTRACE_DETACH): Remove: host-dep.
(NO_SINGLE_STEP): Add, target-dependent.
(loadinfotextindex): Lowercase, remove "aix_".
* xm-rs6000.h: Add <sys/ptrace.h> for infptrace.c.
(NO_SINGLE_STEP): Remove, target-dependent.
* xcoffexec.c (vmap_symtab): Cleanup #if 0'd code.
* xcoffread.c: Only build file if RS/6000 native GDB.
(build_function_symbol): Remove #if 0'd code.
* rs6000-tdep.c: Cleanup. Add static fn protos.
Use CORE_ADDR for addresses throughout. Make void fns void.
(pop_dummy_frame): Add FIXME about bogosity of design here.
(rs6000_struct_return_address): Ditto.
(frameless_function_invocation, frame_get_cache_fsr,
frame_initial_stack_address, xcoff_relocate_symtab,
xcoff_init_loadinfo, free_loadinfo, xcoff_add_toc_to_loadinfo,
add_text_to_loadinfo, find_toc_address): Move from xdep file.
Use CORE_ADDRs. Change identifiers to lowercase.
* rs6000-xdep.c: Make whole file conditional on native RS/6000,
supplying dummy routines if non-native. Add prototype for
static exec_one_dummy_insn. Move a mess of functions to
rs6000-tdep.c (as above). Remove #if 0'd code.
* archive.c (bfd_slurp_bsd_armap): if the symdef_count is too
large, assume we're using a swapped byte order and fail with
wrong_format rather than dumping core.
* obj-bout.h, obj-bout.c (obj_header_append, obj_symbol_to_chars),
tc-i960.c (md_ri_to_chars): Always output bout object file in
little endian byte order (used to use endianness of host).
* targets.c, config/i960-bout.mt, hosts/*: added
HOST_BIG_ENDIAN_DEFAULT_VECTOR and
HOST_LITTLE_ENDIAN_DEFAULT_VECTOR because bout archive format
depends on the endianness of the host. Added #define
HOST_BIG_ENDIAN_P and #undef HOST_BIG_ENDIAN_P to a number of
configuration files in hosts/ (it was already in some).
* ldlang.c (lang_process): don't pass null pointers when
abs_output_section is what is required.
* ldwrite.c (ldwrite): use malloc to allocate the largest space
used, and pass that down.
* relax.c,relax.h (write_relaxnorel): use the passed malloc area rather
than alloca.
Fred Fish [Wed, 26 Aug 1992 23:05:55 +0000 (23:05 +0000)]
* cplus-dem.c: Reorder args to most local functions to make them
follow the consistent pattern of struct work_stuff pointer first,
followed by pointer into string being demangled, followed by
pointer to the string where the result is being stored, followed
by other args. Also generally replace most variables of name
"type" with "mangled" for consistency. They all pointed to the
same string but half were one name and half the other.
* cplus-dem.c (LONGERNAMES): Remove #ifndef's.
* cplus-dem.c (demangle_qualified): Rewrite to clean up and allow
use whenever a qualified name is being demangled.
* cplus-dem.c (do_type): Qualified names are treated similarly
to fundamental types, not as modifiers of fundamental types.
Ken Raeburn [Wed, 26 Aug 1992 04:08:45 +0000 (04:08 +0000)]
* config/tc-m68k.c (init_table): Now const. Always include 68851
data, so that "bc" is available to 68040 cache instructions. Added
"tt0", "tt1", and 68ec030 variants.
(md_assemble): Complain if 68000 (only) and 68881 are specified.
(enum _register): Added TT0, TT1.
(m68k_ip, cases '3' and 't'): Handle new operand type codes. Pass
line number correctly in "internal error" messages. Don't print
architecture-mismatch message for operand errors.
From Colin Smith ([email protected]):
* config/tc-m68k.c (m68k_ip, case '_'): Use addword twice rather than
install_operand.
Ken Raeburn [Wed, 26 Aug 1992 04:02:42 +0000 (04:02 +0000)]
* config/tc-m68k.c (init_table): Now const. Always include 68851
data, so that "bc" is available to 68040 cache instructions. Added
"tt0", "tt1", and 68ec030 variants.
(md_assemble): Complain if 68000 (only) and 68881 are specified.
(enum _register): Added TT0, TT1.
(m68k_ip, cases '3' and 't'): Handle new operand type codes. Pass
line number correctly in "internal error" messages. Don't print
architecture-mismatch message for operand errors.
From Colin Smith ([email protected]):
* config/tc-m68k.c (m68k_ip, case '_'): Use addword twice rather than
install_operand.
Ken Raeburn [Wed, 26 Aug 1992 03:46:22 +0000 (03:46 +0000)]
m68k.h (m68ec030): Defined as alias for 68030.
(m68k_opcodes): New type characters "3" for 68030 MMU regs and "t" for
immediate 0-7 added. Set up some opcodes (ptest, bkpt) to use them.
Tightened description of "fmovex" to distinguish it from some "pmove"
encodings. Added "pmove" for 68030 MMU regs, cleaned up descriptions that
claimed versions were available for chips not supporting them. Added
"pmovefd".
Roland Pesch [Tue, 25 Aug 1992 21:20:06 +0000 (21:20 +0000)]
Markup changes to run through TeX without errors.
WARNING: (1) this has not yet been proofread as a printout---just eliminated
problems that TeX complained about.
(2) extraneous line breaks introduced in some examples, sometimes
in ridiculously long strings; this may falsify examples. Places
where I did this are marked by FIXME comments.
Roland Pesch [Tue, 25 Aug 1992 20:56:41 +0000 (20:56 +0000)]
Some improvements in Texinfo markup:
1) use makeinfo node defaulting
2) correct bad xref
3) use @display, @exdent, etc. as first approximation to Julia's
clever typewriter markup; **THIS WILL NEED STUDY AND REVISION**
4) introduce many nodes rather than ---- in "detailed reference" appendix
* coffcode.h (coff_add_missing_symbols): if symbols don't come
from a coff file (csym is null), dont deref them
* ieee.c (parse_expression): get the answer right when adding an
abs+(sec+off), (ieee_generic_stat_arch_elt): call ieee_object_p
on elts so that filename is filled in.
Fred Fish [Mon, 24 Aug 1992 19:00:24 +0000 (19:00 +0000)]
* infrun.c (handle_command): Rewrite to allow multiple signal
numbers, signal number ranges, and to recognize "all" to mean all
signals except those used by the debugger.
* infrun.c (SET_SIGS, UNSET_SIGS): Macros used in handle_command
to set or reset actions for specific signals.
John Gilmore [Mon, 24 Aug 1992 08:20:14 +0000 (08:20 +0000)]
FIXME. Half-done documentation for the macros used to configure GDB's
sources. What's there now is a list of all macros, and at least one
source file in which they are referenced.
Fred Fish [Mon, 24 Aug 1992 00:13:11 +0000 (00:13 +0000)]
* coffread.c (decode_type): Call alloc_type to alloc new
types.
* stabsread.c (read_array_type, read_range_type, define_symbol):
Call alloc_type to alloc new types.
* stabsread.c (define_symbol): Move dbl_valu symbol field data
from type_obstack to symbol_obstack.
* stabsread.c (define_symbol): Move typedef_sym from type_obstack
to symbol_obstack.
* gdbtypes.h (TYPE_ALLOC): New macro to allocate space for data
associated with a type, using the same mechanism as was used to
allocate space for the type structure itself.
* coffread.c (patch_type, coff_read_struct_type,
coff_read_enum_type): Use TYPE_ALLOC.
* dwarfread.c (struct_type): Use TYPE_ALLOC.
* gdbtypes.c (create_array_type, check_stub_method,
allocate_cplus_struct_type): Use TYPE_ALLOC.
* mipsread.c (parse_symbol, parse_type): Use TYPE_ALLOC.
* stabsread.c (read_struct_type, read_array_type, read_enum_type,
read_range_type): Use TYPE_ALLOC.
Fred Fish [Sun, 23 Aug 1992 18:09:19 +0000 (18:09 +0000)]
* breakpoint.c (breakpoint_re_set): Select a default source
symtab if one is not currently selected.
* utils.c (query): Call wrap_here before building the output
query string, to turn off wrapping and flush any buffered output.
Otherwise our query may end up in the wrap buffer and never be
seen by the user.
* eval.c (evaluate_subexp): Report error when attempting to
evaluate subscript for types without a target type, rather
than dumping core by using the NULL pointer.
* symfile.c (symbol_file_command): Forget current_source_symtab
and current_source_line when discarding symbol table.
Stu Grossman [Fri, 21 Aug 1992 22:35:35 +0000 (22:35 +0000)]
* remote.c (remote_open): Fix baud rate setting to make -b flag
work. (remote_wait): Change 'T' message parser to deal with new
improved format which allows stub to send an arbitrary bunch of
registers.
* sparc-stub.c: General cleanups. (trap_low, handle_exception):
make all this re-entrant by storing all state on the stack. Clean
up memory error trapping. (computeSignal, set_debug_traps):
make it all table driven. Make a start at a baud rate setting command.
Ken Raeburn [Fri, 21 Aug 1992 19:21:52 +0000 (19:21 +0000)]
From p3:
* messages.c (as_warn): Use fputs, not fprintf, with a buffer that
has already been formatted (but may still contain %-characters).
(as_bad): Likewise.
* tc-m68k.c, tc-m68kmote.c: the cas2 instruction is supposed to be
written with indirection on the last two operands, which can be
either data or address registers. Added a new operand type 'r'
which accepts either register type. Added '(' to notend stuff in
tc-m68kmote.c to accept (a0):(a2) in cas2 instruction.
* remote-vx.c: redefine malloc to avoid buggy declaration on
RS/6000 <rpc/types.h>.
xm-rs6000.h: include <sys/select.h> to define fd_set for
<rpc/svc.h> on RS/6000.
* gdbinv-s.m4.in: refrain from using @cartouche for just a few
examples (not consistent w others).
gdb.texinfo: issue disclaimer paragraph on cmdline options only
for generic vn of doc
projects / binutils.git / log