Andrew Cagney [Sun, 16 Jun 2002 15:59:34 +0000 (15:59 +0000)]
* Makefile.in (autoconf-changelog autoheader-changelog): Let name,
id, date and host to be overriden by NAME, ID, DATE and HOST
respectfully. Use ISO dates.
Jeff Law [Sun, 16 Jun 2002 15:32:08 +0000 (15:32 +0000)]
* elf-hppa.h (elf_hppa_final_link): Fix formatting in comment.
Skip excluded sections in determing __gp value.
(elf_hppa_final_link_relocate): Use the symbol's address in
R_PARISC_FPTR64 relocations that don't need an opd entry.
* elf64-hppa.c (allocate_dynrel_entries): Simplify code.
(elf64_hppa_finalize_dynreloc): Likewise.
(elf64_hppa_size_dynamic_sections): Move comments and fix typo.
(elf64_hppa_finish_dynamic_symbol): Break up assert.
Mark Kettenis [Sun, 16 Jun 2002 02:19:22 +0000 (02:19 +0000)]
* config/i386/tm-i386lynx.h (SAVED_PC_AFTER_CALL): Remove define.
(i386lynx_saved_pc_after_call): Remove prototype.
* i386ly-tdep.c: Include "i386-tdep.h".
(i386lynx_saved_pc_after_call): Make static. Use
read_memory_nobpt instead of read_memory. Use
read_memory_unsigned_integer instead of read_memory_integer.
(i386lynx_init_abi): New function.
(i386lynx_coff_osabi_sniffer): New function.
(_initialize_i386bsd_tdep): New function.
Mark Kettenis [Sat, 15 Jun 2002 20:41:51 +0000 (20:41 +0000)]
* config/i386/tm-i386.h (FUNCTION_START_OFFSET, INNER_THAN,
BREAKPOINT, DECR_PC_AFTER_BREAK): Removed.
* i386-tdep.c (i386_skip_prologue): Adjust function signature to
fit into multi-arch framework.
(i386_breakpoint_from_pc): New function.
(i386_gdbarch_init): Adjust for removal of the macros mentioned
above.
* nm.c (print_size): New variable. Initialize to 0.
(long_options): Add 'S'/"print-size".
(main): Handle 'S'.
(print_symbol_info_bsd): Print size only if print_size is not
0.
Mark Kettenis [Sat, 15 Jun 2002 17:22:04 +0000 (17:22 +0000)]
* i386v4-nat.c: Include "i386-tdep.h". Reformat and tweak various
comments.
(fill_gregset, supply_gregset, supply_fpregset, fill_fpregset):
Remove prototypes.
(supply_gregset, fill_gregset): Remove use of register keyword and
remove declaration for regmap. Use I386_NUM_GREGS instead of
NUM_REGS and NUM_FREGS.
(FPREGSET_FSAVE_OFFSET): Remove.
(supply_fpregset, fill_fpregset): Use FPO_REGNUM instead of
NUM_FREGS to determine whether the floating-point registers are
available.
Mark Kettenis [Sat, 15 Jun 2002 13:47:20 +0000 (13:47 +0000)]
* i386v-nat.c: Remove copnditional inclusion of <asm/debugreg.h>,
and associated comment. They no longer make any sense, since we
don't use this file anymore on Linux.
Mark Kettenis [Sat, 15 Jun 2002 12:59:09 +0000 (12:59 +0000)]
* config/i386/tm-i386.h (MAX_NUM_REGS): Removed.
* i386-tdep.c (i386_register_offset, i386_register_size): Use
I386_SSE_NUM_REGS instead of MAX_NUM_REGS for the number of
elements in these arrays.
(_initialize_i386_tdep): Use I386_SSE_NUM_REGS instead of
MAX_NUM_REGS.
* mips3d.igen: New file which contains MIPS-3D ASE instructions.
* Makefile.in (IGEN_INCLUDE): Add mips3d.igen.
* mips.igen: Include mips3d.igen.
(mips3d): New model name for MIPS-3D ASE instructions.
(CVT.W.fmt): Don't use this instruction for word (source) format
instructions.
* cp1.c (fp_binary_r, fp_add_r, fp_mul_r, fpu_inv1, fpu_inv1_32)
(fpu_inv1_64, fp_recip1, fp_recip2, fpu_inv_sqrt1, fpu_inv_sqrt1_32)
(fpu_inv_sqrt1_64, fp_rsqrt1, fp_rsqrt2): New functions.
(NR_FRAC_GUARD, IMPLICIT_1): New macros.
* sim-main.h (fmt_pw, CompareAbs, AddR, MultiplyR, Recip1, Recip2)
(RSquareRoot1, RSquareRoot2): New macros.
(fp_add_r, fp_mul_r, fp_recip1, fp_recip2, fp_rsqrt1)
(fp_rsqrt2): New functions.
* configure.in: Add MIPS-3D support to mipsisa64 simulator.
* configure: Regenerate.
* c-typeprint.c (cp_type_print_method_args): Take method type
instead of argument list. Use new argument layout. Simplify.
(c_type_print_args): Use new argument layout. Simplify.
(c_type_print_base): Update call to cp_type_print_method_args.
* dwarf2read.c (dwarf2_add_member_fn): Remove unneeded type
argument; use die->type instead. Update call to
smash_to_method_type.
(read_structure_scope): Update call to dwarf2_add_member_fn.
* gdbtypes.c (allocate_stub_method): Update comment.
(smash_to_method_type): Take new NARGS and VARARGS arguments.
Use new argument layout.
(check_stub_method): Use new argument layout. Don't count
void as an argument.
(print_arg_types): Update comments. Use new argument layout.
(recursive_dump_type): Don't print arg_types member.
* hpread.c (hpread_read_struct_type): Use new argument layout.
(fixup_class_method_type): Likewise.
(hpread_type_lookup): Likewise.
* stabsread.c (read_type): Update calls to read_args and
smash_to_method_type.
(read_args): Use new argument layout. Simplify.
* valops.c (typecmp): Use new argument layout. Update parameters
and comments. Simplify.
(hand_function_call): Use new argument layout.
(search_struct_method): Update call to typecmp.
(find_overload_match): Use new argument layout.
* cp1.c (FP_PS_upper, FP_PS_lower, FP_PS_cat, FPQNaN_PS): New macros.
(value_fpr, store_fpr, fp_cmp, fp_unary, fp_binary, fp_mac)
(fp_inv_sqrt, fpu_format_name): Add paired-single support.
(convert): Note that this function is not used for paired-single
format conversions.
(ps_lower, ps_upper, pack_ps, convert_ps): New functions.
* mips.igen (FMT, MOVtf.fmt): Add paired-single support.
(check_fmt_p): Enable paired-single support.
(ALNV.PS, CVT.PS.S, CVT.S.PL, CVT.S.PU, PLL.PS, PLU.PS, PUL.PS)
(PUU.PS): New instructions.
(CVT.S.fmt): Don't use this instruction for paired-single format
destinations.
* sim-main.h (FP_formats): New value 'fmt_ps.'
(ps_lower, ps_upper, pack_ps, convert_ps): New prototypes.
(PSLower, PSUpper, PackPS, ConvertPS): New macros.
Joern Rennecke [Thu, 13 Jun 2002 20:11:35 +0000 (20:11 +0000)]
Individual processor configurations for sh-elf / sh-linux:
gcc:
* config.gcc: Add support for sh[234]*-*-elf*, sh[2346lbe]*-*-linux*.
* config/sh/linux.h (TARGET_DEFAULT): Use TARGET_CPU_DEFAULT.
* sh.h (SELECT_SH1, SELECT_SH2, SELECT_SH3, SELECT_SH3E): New macros.
(SELECT_SH4_NOFPU, SELECT_SH4_SINGLE_ONLY, SELECT_SH4): Likewise.
(SELECT_SH4_SINGLE, SELECT_SH5_64, SELECT_SH5_64_NOFPU): Likewise.
(SELECT_SH5_32, SELECT_SH5_32_NOFPU, SELECT_SH5_COMPACT): Likewise.
(SELECT_SH5_COMPACT_NOFPU): Likewise.
(TARGET_SWITCHES): Use them.
(TARGET_CPU_DEFAULT): Define if not already defined.
(TARGET_DEFAULT): Use it.
(LINK_DEFAULT_CPU_EMUL): Value now depends on TARGET_CPU_DEFAULT.
* config/sh/t-linux (MULTILIB_OPTIONS): Use MULTILIB_ENDIAN.
* config/sh/t-monolib: New file.
bfd:
config.bfd: Add support for sh[1234]l*-*-elf* | sh3el*-*-elf*,
sh[1234]*-elf*.
ld:
* configure.tgt: Add support for sh[1234]*le*-*-elf, sh[1234]*-*-elf.
Still outstanding:
config.sub:
* config.sub: Add support for sh[12], sh3e, sh[1234]le, sh3ele,
shle, sh[1234]le, sh3ele, sh64le.
* mips-tdep.c (PROC_SYMBOL): Add warning comment.
(struct mips_objfile_private, compare_pdr_entries): New.
(non_heuristic_proc_desc): Read the ".pdr" section if it
is present.
* mips.igen (MOVN, MOVZ): Trace result.
(TNEI): Print "tnei" as the opcode name in traces.
(CEIL.W): Add disassembly string for traces.
(RSQRT.fmt): Make location of disassembly string consistent
with other instructions.
Jeff Law [Wed, 12 Jun 2002 18:12:25 +0000 (18:12 +0000)]
* elf64-hppa.c (allocate_global_data_opd): We don't need an opd entry
for a symbol that has no output section.
(allocate_dynrel_entries): Correct comment.
(elf64_hppa_finalize_dynreloc): Likewise. Don't create an opd entry
unless we want one.
(elf64_hppa_finalize_opd): Prevent segfault if dyn_h is NULL.
(elf64_hppa_finalize_dlt): Likewise. Prevent segfault for symbols
with no section. Remove unnecessary parentheses.
* gdbserver/thread-db.c: New file.
* gdbserver/proc-service.c: New file.
* gdbserver/acinclude.m4: New file.
* gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h,
proc-service.o, and thread-db.o.
(linux-low.o): Add USE_THREAD_DB.
* gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T,
HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN.
* gdbserver/aclocal.m4: Regenerated.
* gdbserver/config.in: Regenerated.
* gdbserver/configure: Regenerated.
* gdbserver/configure.in: Check for proc_service.h, sys/procfs.h,
thread_db.h, and linux/elf.h headrs.
Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and
PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB.
Check for -lthread_db and thread support.
* gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS,
PowerPC, and SuperH.
* gdbserver/i387-fp.c: Constify arguments.
* gdbserver/i387-fp.h: Likewise.
* gdbserver/inferiors.c: (struct thread_info): Renamed from
`struct inferior_info'. Remove PID member. Use generic inferior
list header. All uses updated.
(inferiors, signal_pid): Removed.
(all_threads): New variable.
(get_thread): Define.
(add_inferior_to_list): New function.
(for_each_inferior): New function.
(change_inferior_id): New function.
(add_inferior): Removed.
(remove_inferior): New function.
(add_thread): New function.
(free_one_thread): New function.
(remove_thread): New function.
(clear_inferiors): Use for_each_inferior and free_one_thread.
(find_inferior): New function.
(find_inferior_id): New function.
(inferior_target_data): Update argument type.
(set_inferior_target_data): Likewise.
(inferior_regcache_data): Likewise.
(set_inferior_regcache_data): Likewise.
* gdbserver/linux-low.c (linux_bp_reinsert): Remove.
(all_processes, stopping_threads, using_thrads)
(struct pending_signals, debug_threads, pid_of): New.
(inferior_pid): Replace with macro.
(struct inferior_linux_data): Remove.
(get_stop_pc, add_process): New functions.
(linux_create_inferior): Restore SIGRTMIN+1 before calling exec.
Use add_process and add_thread.
(linux_attach_lwp): New function, based on old linux_attach. Use
add_process and add_thread. Set stop_expected for new threads.
(linux_attach): New function.
(linux_kill_one_process): New function.
(linux_kill): Kill all LWPs.
(linux_thread_alive): Use find_inferior_id.
(check_removed_breakpoints, status_pending_p): New functions.
(linux_wait_for_process): Renamed from linux_wait_for_one_inferior.
Update. Use WNOHANG. Wait for cloned processes also. Update process
struct for the found process.
(linux_wait_for_event): New function.
(linux_wait): Use it. Support LWPs.
(send_sigstop, wait_for_sigstop, stop_all_processes)
(linux_resume_one_process, linux_continue_one_process): New functions.
(linux_resume): Support LWPs.
(REGISTER_RAW_SIZE): Remove.
(fetch_register): Use register_size instead. Call supply_register.
(usr_store_inferior_registers): Likewise. Call collect_register.
Fix recursive case.
(regsets_fetch_inferior_registers): Improve error message.
(regsets_store_inferior_registers): Add debugging.
(linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB.
(unstopped_p, linux_signal_pid): New functions.
(linux_target_ops): Add linux_signal_pid.
(linux_init_signals): New function.
(initialize_low): Call it. Initialize using_threads.
* gdbserver/regcache.c (inferior_regcache_data): Add valid
flag.
(get_regcache): Fetch registers lazily. Add fetch argument
and update all callers.
(regcache_invalidate_one, regcache_invalidate): New
functions.
(new_register_cache): Renamed from create_register_cache.
Return the new regcache.
(free_register_cache): Change argument to a void *.
(registers_to_string, registers_from_string): Call get_regcache
with fetch flag set.
(register_data): Make static. Pass fetch flag to get_regcache.
(supply_register): Call get_regcache with fetch flag clear.
(collect_register): Call get_regcache with fetch flag set.
(collect_register_as_string): New function.
* gdbserver/regcache.h: Update.
* gdbserver/remote-utils.c (putpkt): Flush after debug output and use
stderr.
Handle input interrupts while waiting for an ACK.
(input_interrupt): Use signal_pid method.
(getpkt): Flush after debug output and use stderr.
(outreg): Use collect_register_as_string.
(new_thread_notify, dead_thread_notify): New functions.
(prepare_resume_reply): Check using_threads. Set thread_from_wait
and general_thread.
(look_up_one_symbol): Flush after debug output.
* gdbserver/server.c (step_thread, server_waiting): New variables.
(start_inferior): Don't use signal_pid. Update call to mywait.
(attach_inferior): Update call to mywait.
(handle_query): Handle qfThreadInfo and qsThreadInfo.
(main): Don't fetch/store registers explicitly. Use
set_desired_inferior. Support proposed ``Hs'' packet. Update
calls to mywait.
* gdbserver/server.h: Update.
(struct inferior_list, struct_inferior_list_entry): New.
* gdbserver/target.c (set_desired_inferior): New.
(write_inferior_memory): Constify.
(mywait): New function.
* gdbserver/target.h: Update.
(struct target_ops): New signal_pid method.
(mywait): Removed macro, added prototype.
* gdbserver/linux-low.h (regset_func): Removed.
(regset_fill_func, regset_store_func): New.
(enum regset_type): New.
(struct regset_info): Add type field. Use new operation types.
(struct linux_target_ops): stop_pc renamed to get_pc.
Add decr_pc_after_break and breakpoint_at.
(get_process, get_thread_proess, get_process_thread)
(strut process_info, all_processes, linux_attach_lwp)
(thread_db_init): New.
* gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc,
arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset)
(i386_store_fpxregset): Constify.
(target_regsets): Add new kind identifier.
(i386_get_pc): Renamed from i386_stop_pc. Simplify.
(i386_set_pc): Add debugging.
(i386_breakpoint_at): New function.
(the_low_target): Add new members.
* gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc)
(mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr)
(mips_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc)
(ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc)
(sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-x86-64-low.c (target_regsets): Add new kind
identifier.
Corinna Vinschen [Tue, 11 Jun 2002 07:01:12 +0000 (07:01 +0000)]
* v850-tdep.c (v850_type_is_scalar): New function.
(v850_use_struct_convention): Match current gcc implementation
as close as possible.
(v850_push_arguments): Fix stack_offset handling. Don't write
struct_addr into register. This is done by v850_store_struct_return.
(v850_extract_return_value): Care for structs.
(v850_store_return_value): Ditto.
(v850_store_struct_return): Actually write address.
Andrew Cagney [Mon, 10 Jun 2002 23:25:50 +0000 (23:25 +0000)]
* infrun.c (struct inferior_status): Replace fields
selected_frame_address and selected_level with field
selected_frame_id.
(save_inferior_status): Update. Use get_frame_id.
(struct restore_selected_frame_args): Delete.
(restore_selected_frame): Update. Use frame_find_by_id.
(restore_inferior_status): Update.
* breakpoint.h (struct breakpoint): Change type of
watchpoint_frame to frame_id.
* breakpoint.c (insert_breakpoints): Use frame_find_by_id. Remove
call to get_current_frame.
(do_enable_breakpoint): Use frame_find_by_id. Remove call to
get_current_frame.
(watchpoint_check): Use frame_find_by_id.
projects / binutils.git / log