Eli Zaretskii [Sat, 13 Nov 2004 17:00:04 +0000 (17:00 +0000)]
* config/i386/xm-go32.h: Don't include fopen-bin.h.
Don't define CRLF_SOURCE_FILES and DIRNAME_SEPARATOR.
* source.c (OPEN_MODE, FDOPEN_MODE): Remove the definitions in the
branch that doesn't define CRLF_SOURCE_FILES; always use
binary-mode open.
(print_source_lines_base, forward_search_command)
(reverse_search_command): Enable the code that accepts DOS-style
CRLF line endings on all platforms (this removes the need for
CRLF_SOURCE_FILES).
* defs.h: (DIRNAME_SEPARATOR) [__MSDOS__]: Define to ';'.
Eli Zaretskii [Sat, 13 Nov 2004 13:36:53 +0000 (13:36 +0000)]
Fix DJGPP configury due to some bitrot:
* config/djgpp/fnchange.lst: Group renames for opcode directory
together.
* config/djgpp/djconfig.sh: Replace file names that don't exist
anymore with existing files, for checking the unpacked
distribution.
* config/djgpp/config.sed (am_cv_exeext, lt_cv_sys_max_cmd_len):
Export pre-cooked values in configure-* targets that begin with
"@test -f stage_last".
* pa64solib.c (pa64_solib_thread_start_addr): Rename from
so_lib_thread_start_addr.
* pa64solib.h (so_list): Forward declare.
(pa64_solib_thread_start_addr): Prototype.
* somsolib.c (SHL_LOAD, SHL_UNLOAD): Define if not already defined.
(no_shared_libraries): Remove.
(som_solib_thread_start_addr): Rename from so_lib_thread_start_addr.
* somsolib.h (som_solib_thread_start_addr): Likewise; prototype.
* hpread.c (hpread_process_one_debug_symbol): Use either the som or
the elf solib handler to find the start address.
* config/pa/hppahpux.mh (NATDEPFILES): Move target-specific support
files to the target makefile.
* config/pa/hpux1020.mh (NATDEPFILES): Likewise.
* config/pa/hpux11.mh (NATDEPFILES): Likewise.
* config/pa/hpux11w.mh (NATDEPFILES): Likewise.
* config/pa/hppa64.mt (TDEPFILES): Put target-specific support
files for symbol reading and shared library handling here.
* config/pa/hppahpux.mt (TDEPFILES): Likewise.
(PA_SOM_ONLY): Define so we can build a 32-bit SOM only target
without bringing in 64-bit support.
* pa64solib.c (pa64_solib_thread_start_addr): Rename from
so_lib_thread_start_addr.
* pa64solib.h (so_list): Forward declare.
(pa64_solib_thread_start_addr): Prototype.
* somsolib.c (SHL_LOAD, SHL_UNLOAD): Define if not already defined.
(no_shared_libraries): Remove.
(som_solib_thread_start_addr): Rename from so_lib_thread_start_addr.
* somsolib.h (som_solib_thread_start_addr): Likewise; prototype.
* hpread.c (hpread_process_one_debug_symbol): Use either the som or
the elf solib handler to find the start address.
* config/pa/hppahpux.mh (NATDEPFILES): Move target-specific support
files to the target makefile.
* config/pa/hpux1020.mh (NATDEPFILES): Likewise.
* config/pa/hpux11.mh (NATDEPFILES): Likewise.
* config/pa/hpux11w.mh (NATDEPFILES): Likewise.
* config/pa/hppa64.mt (TDEPFILES): Put target-specific support
files for symbol reading and shared library handling here.
* config/pa/hppahpux.mt (TDEPFILES): Likewise.
(PA_SOM_ONLY): Define so we can build a 32-bit SOM only target
without bringing in 64-bit support.
gas/ChangeLog
* config/tc-xtensa.c (finish_vinsn): Clear pending instruction if
there is a conflict.
(check_t1_t2_reads_and_writes): Check for both reads and writes to
interfaces that are related as determined by xtensa_interface_class_id.
Geoffrey Keating [Fri, 12 Nov 2004 19:38:13 +0000 (19:38 +0000)]
PR 18423
* configure.in: Remove all instances of build-fixincludes from
noconfigdirs.
(build_configargs): Supply --target to subdirectories.
* configure: Regenerate.
* Makefile.def: Make gcc install depend on fixincludes install.
* Makefile.in: Regenerate.
* cris-tdep.c (cris_register_offset): Delete, never called.
(cris_spec_reg_applicable): Delete cris_ver_sim.
* MAINTAINERS: List d10v as OBSOLETE.
* rdi-share/host.h (FOPEN_WB): #ifdef 0 out definitions of
FOPEN_WB et.al., defined by "fopen-bin.h".
* hppa-tdep.c (skip_prologue_hard_way): Make static, add
stop_after_branch parameter and use it to determine if we should look
at the delay slot of the first branch insn to find prologue insns.
(hppa_skip_prologue): Update comment and call to skip_prologue_hard_way.
(hppa_frame_cache): Likewise.
Bob Wilson [Thu, 11 Nov 2004 23:09:24 +0000 (23:09 +0000)]
* elf32-xtensa.c (property_table_compare): Remove assertion about
entries with the same address and non-zero size.
(xtensa_read_table_entries): Report such entries as errors.
Bob Wilson [Thu, 11 Nov 2004 19:05:43 +0000 (19:05 +0000)]
gas/
* config/tc-xtensa.c (MAX_IMMED6): Change value to 65.
gas/testsuite/
* gas/xtensa/short_branch_offset.s: New.
* gas/xtensa/short_branch_offset.d: New.
* gas/xtensa/all.exp: Run new test.
* remote.c (putpkt_binary) Fix PR gdb/1806. Send an ACK
when an unexpected packet is received, as the target stubs
continually retransmit the same packet until ACKed.
Bob Wilson [Wed, 10 Nov 2004 22:20:27 +0000 (22:20 +0000)]
* config/tc-xtensa.c (update_next_frag_state): Always add a NOP if
relaxing at the end of a loop. Don't mark frags as UNREACHABLE or
MAYBE_UNREACHABLE.
(relax_frag_immed): Update call to update_next_frag_state.
* blockframe.c (inside_entry_func): Move to .....
* frame.c (inside_entry_func): ... here, and make static.
(backtrace_past_entry): New flag.
(get_prev_frame): Stop backtrace at the entry function if enabled
by flag. Update comments.
(_initialize_frame): Add command to set backtrace_past_entry flag.
* defs.h (inside_entry_func): Remove prototype.
doc/
* gdb.texinfo: Document set/show backtrace past-entry commands.
Rearrange index entries for set/show backtrace past-main.
Ian Lance Taylor [Wed, 10 Nov 2004 16:10:17 +0000 (16:10 +0000)]
PR binutils/536
* stabs.c (stab_demangle_template): Call stab_demangle_count
rather than stab_demangle_get_count to get the length of a pointer
target.
Mark Mitchell [Tue, 9 Nov 2004 17:40:22 +0000 (17:40 +0000)]
* som.c (som_bfd_print_private_bfd_data): New function.
(som_object_setup): Save the auxiliary header. Don't assume that
zero is an invalid entry point for a shared library.
(som_object_p): Allocate the auxiliary header on the heap.
* sentinel-frame.c (sentinel_frame_prev_pc): New function.
(sentinel_frame_unwinder): Add the prev_pc method.
* frame.c (frame_pc_unwind): Use the per-frame pc unwinder when
available. Do not handle the sentinel-frame case.
* frame-unwind.h (frame_prev_register_ftype): Define.
(struct frame_unwind): Add prev_pc;
PR 528
* symbols.c (resolve_symbol_value): Convert weak symbols only
for Windows PECOFF.
(symbol_equated_reloc_p): Don't equate weaks when relocating
only for Windows PECOFF.
Dave Anglin [Tue, 9 Nov 2004 00:59:03 +0000 (00:59 +0000)]
* configure.in: Check for ncurses/term.h.
* gdb_curses.h: Include term.h here, prefering ncurses/term.h.
* utils.c: Include gdb_curses.h instead of curses.h and term.h.
* tui/tui.c: Don't include term.h.
* configure, config.in: Rebuilt.
Mark Mitchell [Mon, 8 Nov 2004 22:08:07 +0000 (22:08 +0000)]
* elf32-arm.c (elf32_arm_final_link_relocate): When generating an
R_ARM_RELATIVE relocation for Symbian OS, mention the section
symbol in the relocation.