* elf64-hppa.c (elf64_hppa_finish_dynamic_sections)
<DT_HP_LOAD_MAP>: Return unsuccessfully if there's no `.data'
section.

2013-07-27  Andrew Pinski  <[email protected]>

* elfnn-aarch64.c (elfNN_aarch64_check_relocs):
Use the correct alignment for
_bfd_elf_make_dynamic_reloc_section for ILP32.

daily update

2013-07-27  Andrew Pinski  <[email protected]>

* elfnn-aarch64.c (elfNN_aarch64_howto_from_bfd_reloc): Handle
BFD_RELOC_AARCH64_NONE explicitly.

* elf32-vax.c (elf_vax_finish_dynamic_sections): Don't set GOT's
entry size if there is no ELF section data.

* ld-vax-elf/export-class-call.dd: New test.
* ld-vax-elf/export-class-call.rd: New test.
* ld-vax-elf/export-class-call.xd: New test.
* ld-vax-elf/export-class-data.dd: New test.
* ld-vax-elf/export-class-data.rd: New test.
* ld-vax-elf/export-class-data.xd: New test.
* ld-vax-elf/export-class.ld: New test linker script.
* ld-vax-elf/export-class-call.s: New test source.
* ld-vax-elf/export-class-data.s: New test source.
* ld-vax-elf/export-class-def.s: New test source.
* ld-vax-elf/vax-elf.exp: Run the new tests.
* ld-vax-elf/vax-export-class.rd: New test.
* ld-vax-elf/vax-export-class.xd: New test.
* ld-vax-elf/export-class.exp: New test script.

bfd/
* elf32-vax.c (elf_vax_check_relocs) <R_VAX_GOT32, R_VAX_PLT32>:
Don't check symbol visibility here.  Remove a check already
asserted for.
(elf_vax_instantiate_got_entries): Use SYMBOL_REFERENCES_LOCAL
instead of individual checks.
(elf_vax_relocate_section) <R_VAX_GOT32, R_VAX_PLT32>: Only
check the offset to decide if produce a GOT or PLT entry.
Remove redundant assertions.  Remove code to produce GOT entries
for local symbols.  Remove a duplicate comment and add a comment
on GOT relocations.
(elf_vax_finish_dynamic_symbol): Remove code to produce RELATIVE
dynamic relocs.

ld/testsuite/
* ld-vax-elf/got-local-exe.xd: New test.
* ld-vax-elf/got-local-lib.xd: New test.
* ld-vax-elf/got-local-aux.s: New test source.
* ld-vax-elf/got-local-def.s: New test source.
* ld-vax-elf/got-local-ref.s: New test source.
* ld-vax-elf/vax-elf.exp: Run the new tests.

* elf32-vax.c (elf_vax_always_size_sections): Correct a comment
typo.

* elf32-vax.c (elf_vax_discard_got_entries): New function.
(elf_vax_always_size_sections): Likewise.
(elf_vax_size_dynamic_sections): Remove code moved to
elf_vax_always_size_sections.  Make comment on
elf_vax_instantiate_got_entries match reality.
(elf_vax_instantiate_got_entries): Assert that rather than check
if dynobj is null.  Don't check for dynamic_sections_created.
Make function description match reality.
(elf_backend_always_size_sections): New macro.

gdb/gdbserver/

* Makefile.in (SFILES): Add common/mips-linux-watch.c.
(mips-linux-watch.o): New rule.
(mips_linux_watch_h): New variable.
* configure.srv <mips*-*-linux*>: Add mips-linux-watch.o to
srv_tgtobj.
* linux-mips-low.c: Include mips-linux-watch.h.
(struct arch_process_info, struct arch_lwp_info): New.
(update_watch_registers_callback): New function.
(mips_linux_new_process, mips_linux_new_thread) New functions.
(mips_linux_prepare_to_resume, mips_insert_point): New
functions.
(mips_remove_point, mips_stopped_by_watchpoint): New
functions.
(rsp_bp_type_to_target_hw_bp_type): New function.
(mips_stopped_data_address): New function.
(the_low_target): Add watchpoint support functions.

gdb/

* NEWS: Mention that GDBserver now supports hardware
watchpoints on the MIPS GNU/Linux target.

gdb/

* Makefile.in (HFILES_NO_SRCDIR): Add
common/mips-linux-watch.h.
(mips-linux-watch.o): New rule.
* common/mips-linux-watch.c: New.
* common/mips-linux-watch.h: New.
* config/mips/linux.mh (NATDEPFILES): Add mips-linux-watch.o
* mips-linux-nat.c: Include mips-linux-watch.h.
(W_BIT, R_BIT, I_BIT, W_MASK, R_MASK, I_MASK, IRW_MASK): Move
to common/mips-linux-watch.h.
(MAX_DEBUG_REGISTER): Likewise.
(enum pt_watch_style): Likewise.
(struct mips32_watch_regs): Likewise.
(struct mips64_watch_regs): Likewise.
(struct pt_watch_regs): Likewise.
(struct mips_watchpoint): Likewise.
(mips_linux_watch_get_irw_mask): Move to
common/mips-linux-watch.c.
(get_reg_mask, mips_linux_watch_get_num_valid): Likewise.
(mips_linux_watch_get_watchlo): Likewise.
(mips_linux_watch_set_watchlo): Likewise.
(mips_linux_watch_get_watchhi): Likewise.
(mips_linux_watch_set_watchhi): Likewise.
(mips_linux_read_watch_registers): Likewise.
(mips_linux_watch_type_to_irw): Likewise.
(mips_linux_stopped_data_address, fill_mask): Likewise.
(mips_linux_watch_try_one_watch): Likewise.
(mips_linux_watch_populate_regs): Likewise.

gdb/
* mips-linux-nat.c (get_irw_mask): Rename to ...
(mips_linux_watch_get_irw_mask): ... this.  Rename parameter
'set' to 'n'.  Update function comment.  All callers changed.
(get_reg_mask): Rename parameter 'set' to 'n'.  Update
function comment.  All callers changed.
(get_num_valid): Rename to ...
(mips_linux_watch_get_num_valid): ... this.  Rename parameter
'set' to 'n'.  Update function comment.  All callers changed.
(get_watchlo): Rename to ...
(mips_linux_watch_get_watchlo): ... this.  Rename parameter
'set' to 'n'.  Update function comment.  All callers changed.
(set_watchlo): Rename to ...
(mips_linux_watch_set_watchlo): ... this.  Rename parameter
'set' to 'n'.  Update function comment.  All callers changed.
(get_watchhi): Rename to ...
(mips_linux_watch_get_watchhi): ... this.  Update function
comment.  All callers changed.
(set_watchhi): Rename to ...
(mips_linux_watch_set_watchhi): ... this.  Update function
comment.  All callers changed.
(mips_linux_read_watch_registers): Update function comment.
Add new parameters 'lwpid', 'watch_readback', and
'watch_readback_valid'.  Update.
(type_to_irw): Rename to ...
(mips_linux_watch_type_to_irw): ... this.  Update function
comment.  All callers changed.
(fill_mask): Update function comment.
(try_one_watch): Rename to ...
(mips_linux_watch_try_one_watch): ... this.  Change the type
of parameter 'irw' from 'unsigned' to 'uint32_t'.
(populate_regs_from_watches): Rename to ...
(mips_linux_watch_populate_regs): ... this.  Add parameter
'current_watches'.  All callers changed.

gdb/
* mips-linux-nat.c (MAX_DEBUG_REGISTER): Move it earlier in
the code.
(PTRACE_SET_WATCH_REGS, enum pt_watch_style): Remove.
(struct mips32_watch_regs, struct mips64_watch_regs): Remove.
(struct pt_watch_regs): Likewise.
[!PTRACE_GET_WATCH_REGS] (PTRACE_SET_WATCH_REGS): New macro.
[!PTRACE_GET_WATCH_REGS] (enum pt_watch_style): New.
[!PTRACE_GET_WATCH_REGS] (struct mips32_watch_regs): New.
[!PTRACE_GET_WATCH_REGS] (struct mips64_watch_regs): New.
[!PTRACE_GET_WATCH_REGS] (struct pt_watch_regs): New.

gdb/

* breakpoint.h: Include break-common.h.
(enum target_hw_bp_type): Move to ...
* common/break-common.h: ... here.  New.

gdb/gdbserver/

* i386-low.c: Include break-common.h.
(enum target_hw_bp_type): Remove.

daily update

* gdb.mi/mi-var-child-f.exp: Pass f90 to gdb_compile instead
of f77.
Allow for compiler variations of integer types.
Use mi_create_varobj.
Use mi_list_varobj_children for the immediate children of `array'.
Add "has_more" attribute for grandchildren test.

Add Intel AVX-512 support

binutils/

2013-07-26  Sergey Guriev  <[email protected]>
    Alexander Ivchenko  <[email protected]>
    Maxim Kuznetsov  <[email protected]>
    Sergey Lega  <[email protected]>
    Anna Tikhonova  <[email protected]>
    Ilya Tocar  <[email protected]>
    Andrey Turetskiy  <[email protected]>
    Ilya Verbin  <[email protected]>
    Kirill Yukhin  <[email protected]>
    Michael Zolotukhin  <[email protected]>

* dwarf.c (dwarf_regnames_i386): Add k0-k7 registers and
numeration in comments.
(dwarf_regnames_x86_64): Add xmm16-31 and k0-k7 registers to
dwarf table.

gas/

2013-07-26  Sergey Guriev  <[email protected]>
    Alexander Ivchenko  <[email protected]>
    Maxim Kuznetsov  <[email protected]>
    Sergey Lega  <[email protected]>
    Anna Tikhonova  <[email protected]>
    Ilya Tocar  <[email protected]>
    Andrey Turetskiy  <[email protected]>
    Ilya Verbin  <[email protected]>
    Kirill Yukhin  <[email protected]>
    Michael Zolotukhin  <[email protected]>

* config/tc-i386-intel.c (O_zmmword_ptr): New.
(i386_types): Add zmmword.
(i386_intel_simplify_register): Allow regzmm.
(i386_intel_simplify): Handle zmmwords.
(i386_intel_operand): Handle RC/SAE, vector operations and
zmmwords.
* config/tc-i386.c (ZMMWORD_MNEM_SUFFIX): New.
(struct RC_Operation): New.
(struct Mask_Operation): New.
(struct Broadcast_Operation): New.
(vex_prefix): Size of bytes increased to 4 to support EVEX
encoding.
(enum i386_error): Add new error codes: unsupported_broadcast,
broadcast_not_on_src_operand, broadcast_needed,
unsupported_masking, mask_not_on_destination, no_default_mask,
unsupported_rc_sae, rc_sae_operand_not_last_imm,
invalid_register_operand, try_vector_disp8.
(struct _i386_insn): Add new fields vrex, need_vrex, mask,
rounding, broadcast, memshift.
(struct RC_name): New.
(RC_NamesTable): New.
(evexlig): New.
(evexwig): New.
(extra_symbol_chars): Add '{'.
(cpu_arch): Add AVX512F, AVX512CD, AVX512ER and AVX512PF.
(i386_operand_type): Add regzmm, regmask and vec_disp8.
(match_mem_size): Handle zmmwords.
(operand_type_match): Handle zmm-registers.
(mode_from_disp_size): Handle vec_disp8.
(fits_in_vec_disp8): New.
(md_begin): Handle {} properly.
(type_names): Add "rZMM", "Mask reg" and "Vector d8".
(build_vex_prefix): Handle vrex.
(build_evex_prefix): New.
(process_immext): Adjust to properly handle EVEX.
(md_assemble): Add EVEX encoding support.
(swap_2_operands): Correctly handle operands with masking,
broadcasting or RC/SAE.
(check_VecOperands): Support EVEX features.
(VEX_check_operands): Properly handle 16 upper [xyz]mm registers.
(match_template): Support regzmm and handle new error codes.
(process_suffix): Handle zmmwords and zmm-registers.
(check_byte_reg): Extend to zmm-registers.
(process_operands): Extend to zmm-registers.
(build_modrm_byte): Handle EVEX.
(output_insn): Adjust to properly handle EVEX case.
(disp_size): Handle vec_disp8.
(output_disp): Support compressed disp8*N evex feature.
(output_imm): Handle RC/SAE immediates properly.
(check_VecOperations): New.
(i386_immediate): Handle EVEX features.
(i386_index_check): Handle zmmwords and zmm-registers.
(RC_SAE_immediate): New.
(i386_att_operand): Handle EVEX features.
(parse_real_register): Add a check for ZMM/Mask registers.
(OPTION_MEVEXLIG): New.
(OPTION_MEVEXWIG): New.
(md_longopts): Add mevexlig and mevexwig.
(md_parse_option): Handle mevexlig and mevexwig options.
(md_show_usage): Add description for mevexlig and mevexwig.
* doc/c-i386.texi: Document avx512f/.avx512f, avx512cd/.avx512cd,
avx512er/.avx512er, avx512pf/.avx512pf, mevexlig and mevexwig.

gas/testsuite/

2013-07-26  Sergey Guriev  <[email protected]>
    Alexander Ivchenko  <[email protected]>
    Maxim Kuznetsov  <[email protected]>
    Sergey Lega  <[email protected]>
    Anna Tikhonova  <[email protected]>
    Ilya Tocar  <[email protected]>
    Andrey Turetskiy  <[email protected]>
    Ilya Verbin  <[email protected]>
    Kirill Yukhin  <[email protected]>
    Michael Zolotukhin  <[email protected]>

* gas/cfi/cfi-i386.s: Add tests for k0-k7.
* gas/cfi/cfi-i386.d: Change to reflect above mentioned changes.
* gas/cfi/cfi-x86_64.s: Add tests for xmm16-31, k0-7.
* gas/cfi/cfi-x86_64.d: Change to reflect above mentioned changes.
* gas/i386/ilp32/cfi/cfi-x86_64.d: Ditto.
* gas/i386/intel-regs.s: Add tests for zmm0 and xmm16 registers.
* gas/i386/intel-regs.d: Change correspondingly.
* gas/i386/prefetch-intel.d: Reflect implementation of prefetchwt1.
* gas/i386/prefetch.d: Ditto.
* gas/i386/x86-64-prefetch-intel.d: Ditto.
* gas/i386/x86-64-prefetch.d: Ditto.
* gas/i386/avx512f-intel.d: New.
* gas/i386/avx512f-nondef.d: New.
* gas/i386/avx512f-nondef.s: New.
* gas/i386/avx512f-opts-intel.d: New.
* gas/i386/avx512f-opts.d: New.
* gas/i386/avx512f-opts.s: New.
* gas/i386/avx512f.d: New.
* gas/i386/avx512f.s: New.
* gas/i386/avx512cd-intel.d: New.
* gas/i386/avx512cd.d: New.
* gas/i386/avx512cd.s: New.
* gas/i386/avx512er-intel.d: New.
* gas/i386/avx512er.d: New.
* gas/i386/avx512er.s: New.
* gas/i386/avx512pf-intel.d: New.
* gas/i386/avx512pf.d: New.
* gas/i386/avx512pf.s: New.
* gas/i386/evex-lig.s: New.
* gas/i386/evex-lig256-intel.d: New.
* gas/i386/evex-lig256.d: New.
* gas/i386/evex-lig512-intel.d: New.
* gas/i386/evex-lig512.d: New.
* gas/i386/evex-wig.s: New.
* gas/i386/evex-wig1-intel.d: New.
* gas/i386/evex-wig1.d: New.
* gas/i386/inval-avx512f.l: New.
* gas/i386/inval-avx512f.s: New.
* gas/i386/x86-64-avx512f-intel.d: New.
* gas/i386/x86-64-avx512f-nondef.d: New.
* gas/i386/x86-64-avx512f-nondef.s: New.
* gas/i386/x86-64-avx512f-opts-intel.d: New.
* gas/i386/x86-64-avx512f-opts.d: New.
* gas/i386/x86-64-avx512f-opts.s: New.
* gas/i386/x86-64-avx512f.d: New.
* gas/i386/x86-64-avx512f.s: New.
* gas/i386/x86-64-avx512cd-intel.d: New.
* gas/i386/x86-64-avx512cd.d: New.
* gas/i386/x86-64-avx512cd.s: New.
* gas/i386/x86-64-avx512er-intel.d: New.
* gas/i386/x86-64-avx512er.d: New.
* gas/i386/x86-64-avx512er.s: New.
* gas/i386/x86-64-avx512pf-intel.d: New.
* gas/i386/x86-64-avx512pf.d: New.
* gas/i386/x86-64-avx512pf.s: New.
* gas/i386/x86-64-evex-lig.s: New.
* gas/i386/x86-64-evex-lig256-intel.d: New.
* gas/i386/x86-64-evex-lig256.d: New.
* gas/i386/x86-64-evex-lig512-intel.d: New.
* gas/i386/x86-64-evex-lig512.d: New.
* gas/i386/x86-64-evex-wig.s: New.
* gas/i386/x86-64-evex-wig1-intel.d: New.
* gas/i386/x86-64-evex-wig1.d: New.
* gas/i386/x86-64-inval-avx512f.l: New.
* gas/i386/x86-64-inval-avx512f.s: New.
* gas/i386/i386.exp: Run new AVX-512 tests.

opcodes/

2013-07-26  Sergey Guriev  <[email protected]>
    Alexander Ivchenko  <[email protected]>
    Maxim Kuznetsov  <[email protected]>
    Sergey Lega  <[email protected]>
    Anna Tikhonova  <[email protected]>
    Ilya Tocar  <[email protected]>
    Andrey Turetskiy  <[email protected]>
    Ilya Verbin  <[email protected]>
    Kirill Yukhin  <[email protected]>
    Michael Zolotukhin  <[email protected]>

* i386-dis-evex.h: New.
* i386-dis.c (OP_Rounding): New.
(VPCMP_Fixup): New.
(OP_Mask): New.
(Rdq): New.
(XMxmmq): New.
(EXdScalarS): New.
(EXymm): New.
(EXEvexHalfBcstXmmq): New.
(EXxmm_mdq): New.
(EXEvexXGscat): New.
(EXEvexXNoBcst): New.
(VPCMP): New.
(EXxEVexR): New.
(EXxEVexS): New.
(XMask): New.
(MaskG): New.
(MaskE): New.
(MaskR): New.
(MaskVex): New.
(modes enum): Add evex_x_gscat_mode, evex_x_nobcst_mode,
evex_half_bcst_xmmq_mode, xmm_mdq_mode, ymm_mode,
evex_rounding_mode, evex_sae_mode, mask_mode.
(USE_EVEX_TABLE): New.
(EVEX_TABLE): New.
(EVEX enum): New.
(REG enum): Add REG_EVEX_0F72, REG_EVEX_0F73, REG_EVEX_0F38C6,
REG_EVEX_0F38C7.
(MOD enum): Add MOD_EVEX_0F10_PREFIX_1, MOD_EVEX_0F10_PREFIX_3,
MOD_EVEX_0F11_PREFIX_1, MOD_EVEX_0F11_PREFIX_3,
MOD_EVEX_0F12_PREFIX_0, MOD_EVEX_0F16_PREFIX_0, MOD_EVEX_0F38C6_REG_1,
MOD_EVEX_0F38C6_REG_2, MOD_EVEX_0F38C6_REG_5, MOD_EVEX_0F38C6_REG_6,
MOD_EVEX_0F38C7_REG_1, MOD_EVEX_0F38C7_REG_2,  MOD_EVEX_0F38C7_REG_5,
MOD_EVEX_0F38C7_REG_6.
(PREFIX enum): Add PREFIX_VEX_0F41, PREFIX_VEX_0F42, PREFIX_VEX_0F44,
PREFIX_VEX_0F45, PREFIX_VEX_0F46, PREFIX_VEX_0F47, PREFIX_VEX_0F4B,
PREFIX_VEX_0F90, PREFIX_VEX_0F91, PREFIX_VEX_0F92, PREFIX_VEX_0F93,
PREFIX_VEX_0F98, PREFIX_VEX_0F3A30, PREFIX_VEX_0F3A32,
PREFIX_VEX_0F3AF0, PREFIX_EVEX_0F10, PREFIX_EVEX_0F11,
PREFIX_EVEX_0F12, PREFIX_EVEX_0F13, PREFIX_EVEX_0F14,
PREFIX_EVEX_0F15, PREFIX_EVEX_0F16, PREFIX_EVEX_0F17,
PREFIX_EVEX_0F28, PREFIX_EVEX_0F29, PREFIX_EVEX_0F2A,
PREFIX_EVEX_0F2B, PREFIX_EVEX_0F2C, PREFIX_EVEX_0F2D,
PREFIX_EVEX_0F2E, PREFIX_EVEX_0F2F, PREFIX_EVEX_0F51,
PREFIX_EVEX_0F58, PREFIX_EVEX_0F59, PREFIX_EVEX_0F5A,
PREFIX_EVEX_0F5B, PREFIX_EVEX_0F5C, PREFIX_EVEX_0F5D,
PREFIX_EVEX_0F5E, PREFIX_EVEX_0F5F, PREFIX_EVEX_0F62,
PREFIX_EVEX_0F66, PREFIX_EVEX_0F6A, PREFIX_EVEX_0F6C,
PREFIX_EVEX_0F6D, PREFIX_EVEX_0F6E, PREFIX_EVEX_0F6F,
PREFIX_EVEX_0F70, PREFIX_EVEX_0F72_REG_0, PREFIX_EVEX_0F72_REG_1,
PREFIX_EVEX_0F72_REG_2, PREFIX_EVEX_0F72_REG_4,
PREFIX_EVEX_0F72_REG_6, PREFIX_EVEX_0F73_REG_2,
PREFIX_EVEX_0F73_REG_6, PREFIX_EVEX_0F76, PREFIX_EVEX_0F78,
PREFIX_EVEX_0F79, PREFIX_EVEX_0F7A, PREFIX_EVEX_0F7B,
PREFIX_EVEX_0F7E, PREFIX_EVEX_0F7F, PREFIX_EVEX_0FC2,
PREFIX_EVEX_0FC6, PREFIX_EVEX_0FD2, PREFIX_EVEX_0FD3,
PREFIX_EVEX_0FD4, PREFIX_EVEX_0FD6, PREFIX_EVEX_0FDB,
PREFIX_EVEX_0FDF, PREFIX_EVEX_0FE2, PREFIX_EVEX_0FE6 PREFIX_EVEX_0FE7,
PREFIX_EVEX_0FEB, PREFIX_EVEX_0FEF, PREFIX_EVEX_0FF2,
PREFIX_EVEX_0FF3, PREFIX_EVEX_0FF4, PREFIX_EVEX_0FFA, PREFIX_EVEX_0FFB,
PREFIX_EVEX_0FFE, PREFIX_EVEX_0F380C, PREFIX_EVEX_0F380D,
PREFIX_EVEX_0F3811, PREFIX_EVEX_0F3812, PREFIX_EVEX_0F3813,
PREFIX_EVEX_0F3814, PREFIX_EVEX_0F3815, PREFIX_EVEX_0F3816,
PREFIX_EVEX_0F3818, PREFIX_EVEX_0F3819, PREFIX_EVEX_0F381A,
PREFIX_EVEX_0F381B, PREFIX_EVEX_0F381E, PREFIX_EVEX_0F381F,
PREFIX_EVEX_0F3821, PREFIX_EVEX_0F3822, PREFIX_EVEX_0F3823,
PREFIX_EVEX_0F3824, PREFIX_EVEX_0F3825, PREFIX_EVEX_0F3827,
PREFIX_EVEX_0F3828, PREFIX_EVEX_0F3829, PREFIX_EVEX_0F382A,
PREFIX_EVEX_0F382C, PREFIX_EVEX_0F382D, PREFIX_EVEX_0F3831,
PREFIX_EVEX_0F3832, PREFIX_EVEX_0F3833, PREFIX_EVEX_0F3834,
PREFIX_EVEX_0F3835, PREFIX_EVEX_0F3836, PREFIX_EVEX_0F3837,
PREFIX_EVEX_0F3839, PREFIX_EVEX_0F383A, PREFIX_EVEX_0F383B,
PREFIX_EVEX_0F383D, PREFIX_EVEX_0F383F, PREFIX_EVEX_0F3840,
PREFIX_EVEX_0F3842, PREFIX_EVEX_0F3843, PREFIX_EVEX_0F3844,
PREFIX_EVEX_0F3845, PREFIX_EVEX_0F3846, PREFIX_EVEX_0F3847,
PREFIX_EVEX_0F384C, PREFIX_EVEX_0F384D, PREFIX_EVEX_0F384E,
PREFIX_EVEX_0F384F, PREFIX_EVEX_0F3858, PREFIX_EVEX_0F3859,
PREFIX_EVEX_0F385A, PREFIX_EVEX_0F385B, PREFIX_EVEX_0F3864,
PREFIX_EVEX_0F3865, PREFIX_EVEX_0F3876, PREFIX_EVEX_0F3877,
PREFIX_EVEX_0F387C, PREFIX_EVEX_0F387E, PREFIX_EVEX_0F387F,
PREFIX_EVEX_0F3888, PREFIX_EVEX_0F3889, PREFIX_EVEX_0F388A,
PREFIX_EVEX_0F388B, PREFIX_EVEX_0F3890, PREFIX_EVEX_0F3891,
PREFIX_EVEX_0F3892, PREFIX_EVEX_0F3893, PREFIX_EVEX_0F3896,
PREFIX_EVEX_0F3897, PREFIX_EVEX_0F3898, PREFIX_EVEX_0F3899,
PREFIX_EVEX_0F389A, PREFIX_EVEX_0F389B, PREFIX_EVEX_0F389C,
PREFIX_EVEX_0F389D, PREFIX_EVEX_0F389E, PREFIX_EVEX_0F389F,
PREFIX_EVEX_0F38A0, PREFIX_EVEX_0F38A1, PREFIX_EVEX_0F38A2,
PREFIX_EVEX_0F38A3, PREFIX_EVEX_0F38A6, PREFIX_EVEX_0F38A7,
PREFIX_EVEX_0F38A8, PREFIX_EVEX_0F38A9, PREFIX_EVEX_0F38AA,
PREFIX_EVEX_0F38AB, PREFIX_EVEX_0F38AC, PREFIX_EVEX_0F38AD,
PREFIX_EVEX_0F38AE, PREFIX_EVEX_0F38AF, PREFIX_EVEX_0F38B6,
PREFIX_EVEX_0F38B7, PREFIX_EVEX_0F38B8, PREFIX_EVEX_0F38B9,
PREFIX_EVEX_0F38BA, PREFIX_EVEX_0F38BB, PREFIX_EVEX_0F38BC,
PREFIX_EVEX_0F38BD, PREFIX_EVEX_0F38BE, PREFIX_EVEX_0F38BF,
PREFIX_EVEX_0F38C4, PREFIX_EVEX_0F38C6_REG_1,
PREFIX_EVEX_0F38C6_REG_2, PREFIX_EVEX_0F38C6_REG_5,
PREFIX_EVEX_0F38C6_REG_6, PREFIX_EVEX_0F38C7_REG_1,
PREFIX_EVEX_0F38C7_REG_2, PREFIX_EVEX_0F38C7_REG_5,
PREFIX_EVEX_0F38C7_REG_6, PREFIX_EVEX_0F38C8, PREFIX_EVEX_0F38CA,
PREFIX_EVEX_0F38CB, PREFIX_EVEX_0F38CC, PREFIX_EVEX_0F38CD,
PREFIX_EVEX_0F3A00,  PREFIX_EVEX_0F3A01, PREFIX_EVEX_0F3A03,
PREFIX_EVEX_0F3A04, PREFIX_EVEX_0F3A05, PREFIX_EVEX_0F3A08,
PREFIX_EVEX_0F3A09, PREFIX_EVEX_0F3A0A, PREFIX_EVEX_0F3A0B,
PREFIX_EVEX_0F3A17, PREFIX_EVEX_0F3A18, PREFIX_EVEX_0F3A19,
PREFIX_EVEX_0F3A1A, PREFIX_EVEX_0F3A1B, PREFIX_EVEX_0F3A1D,
PREFIX_EVEX_0F3A1E, PREFIX_EVEX_0F3A1F, PREFIX_EVEX_0F3A21,
PREFIX_EVEX_0F3A23, PREFIX_EVEX_0F3A25, PREFIX_EVEX_0F3A26,
PREFIX_EVEX_0F3A27, PREFIX_EVEX_0F3A38, PREFIX_EVEX_0F3A39,
PREFIX_EVEX_0F3A3A, PREFIX_EVEX_0F3A3B, PREFIX_EVEX_0F3A3E,
PREFIX_EVEX_0F3A3F, PREFIX_EVEX_0F3A43, PREFIX_EVEX_0F3A54,
PREFIX_EVEX_0F3A55.
(VEX_LEN enum): Add VEX_LEN_0F41_P_0, VEX_LEN_0F42_P_0, VEX_LEN_0F44_P_0,
VEX_LEN_0F45_P_0, VEX_LEN_0F46_P_0, VEX_LEN_0F47_P_0,
VEX_LEN_0F4B_P_2, VEX_LEN_0F90_P_0, VEX_LEN_0F91_P_0,
VEX_LEN_0F92_P_0, VEX_LEN_0F93_P_0, VEX_LEN_0F98_P_0,
VEX_LEN_0F3A30_P_2, VEX_LEN_0F3A32_P_2, VEX_W_0F41_P_0_LEN_1,
VEX_W_0F42_P_0_LEN_1, VEX_W_0F44_P_0_LEN_0, VEX_W_0F45_P_0_LEN_1,
VEX_W_0F46_P_0_LEN_1, VEX_W_0F47_P_0_LEN_1, VEX_W_0F4B_P_2_LEN_1,
VEX_W_0F90_P_0_LEN_0, VEX_W_0F91_P_0_LEN_0, VEX_W_0F92_P_0_LEN_0,
VEX_W_0F93_P_0_LEN_0, VEX_W_0F98_P_0_LEN_0, VEX_W_0F3A30_P_2_LEN_0,
VEX_W_0F3A32_P_2_LEN_0.
(VEX_W enum): Add EVEX_W_0F10_P_0, EVEX_W_0F10_P_1_M_0,
EVEX_W_0F10_P_1_M_1, EVEX_W_0F10_P_2, EVEX_W_0F10_P_3_M_0,
EVEX_W_0F10_P_3_M_1, EVEX_W_0F11_P_0, EVEX_W_0F11_P_1_M_0,
EVEX_W_0F11_P_1_M_1, EVEX_W_0F11_P_2, EVEX_W_0F11_P_3_M_0,
EVEX_W_0F11_P_3_M_1, EVEX_W_0F12_P_0_M_0, EVEX_W_0F12_P_0_M_1,
EVEX_W_0F12_P_1, EVEX_W_0F12_P_2, EVEX_W_0F12_P_3, EVEX_W_0F13_P_0,
EVEX_W_0F13_P_2, EVEX_W_0F14_P_0, EVEX_W_0F14_P_2, EVEX_W_0F15_P_0,
EVEX_W_0F15_P_2, EVEX_W_0F16_P_0_M_0, EVEX_W_0F16_P_0_M_1,
EVEX_W_0F16_P_1, EVEX_W_0F16_P_2, EVEX_W_0F17_P_0, EVEX_W_0F17_P_2,
EVEX_W_0F28_P_0, EVEX_W_0F28_P_2, EVEX_W_0F29_P_0, EVEX_W_0F29_P_2,
EVEX_W_0F2A_P_1, EVEX_W_0F2A_P_3, EVEX_W_0F2B_P_0, EVEX_W_0F2B_P_2,
EVEX_W_0F2E_P_0, EVEX_W_0F2E_P_2, EVEX_W_0F2F_P_0, EVEX_W_0F2F_P_2,
EVEX_W_0F51_P_0, EVEX_W_0F51_P_1, EVEX_W_0F51_P_2, EVEX_W_0F51_P_3,
EVEX_W_0F58_P_0, EVEX_W_0F58_P_1, EVEX_W_0F58_P_2, EVEX_W_0F58_P_3,
EVEX_W_0F59_P_0, EVEX_W_0F59_P_1, EVEX_W_0F59_P_2, EVEX_W_0F59_P_3,
EVEX_W_0F5A_P_0, EVEX_W_0F5A_P_1, EVEX_W_0F5A_P_2, EVEX_W_0F5A_P_3,
EVEX_W_0F5B_P_0, EVEX_W_0F5B_P_1, EVEX_W_0F5B_P_2, EVEX_W_0F5C_P_0,
EVEX_W_0F5C_P_1, EVEX_W_0F5C_P_2, EVEX_W_0F5C_P_3, EVEX_W_0F5D_P_0,
EVEX_W_0F5D_P_1, EVEX_W_0F5D_P_2, EVEX_W_0F5D_P_3, EVEX_W_0F5E_P_0,
EVEX_W_0F5E_P_1, EVEX_W_0F5E_P_2, EVEX_W_0F5E_P_3, EVEX_W_0F5F_P_0,
EVEX_W_0F5F_P_1, EVEX_W_0F5F_P_2, EVEX_W_0F5F_P_3, EVEX_W_0F62_P_2,
EVEX_W_0F66_P_2, EVEX_W_0F6A_P_2, EVEX_W_0F6C_P_2, EVEX_W_0F6D_P_2,
EVEX_W_0F6E_P_2, EVEX_W_0F6F_P_1, EVEX_W_0F6F_P_2, EVEX_W_0F70_P_2,
EVEX_W_0F72_R_2_P_2, EVEX_W_0F72_R_6_P_2, EVEX_W_0F73_R_2_P_2,
EVEX_W_0F73_R_6_P_2, EVEX_W_0F76_P_2, EVEX_W_0F78_P_0,
EVEX_W_0F79_P_0, EVEX_W_0F7A_P_1, EVEX_W_0F7A_P_3, EVEX_W_0F7B_P_1,
EVEX_W_0F7B_P_3, EVEX_W_0F7E_P_1, EVEX_W_0F7E_P_2, EVEX_W_0F7F_P_1,
EVEX_W_0F7F_P_2, EVEX_W_0FC2_P_0, EVEX_W_0FC2_P_1, EVEX_W_0FC2_P_2,
EVEX_W_0FC2_P_3, EVEX_W_0FC6_P_0, EVEX_W_0FC6_P_2, EVEX_W_0FD2_P_2,
EVEX_W_0FD3_P_2, EVEX_W_0FD4_P_2, EVEX_W_0FD6_P_2, EVEX_W_0FE6_P_1,
EVEX_W_0FE6_P_2, EVEX_W_0FE6_P_3, EVEX_W_0FE7_P_2, EVEX_W_0FF2_P_2,
EVEX_W_0FF3_P_2, EVEX_W_0FF4_P_2, EVEX_W_0FFA_P_2, EVEX_W_0FFB_P_2,
EVEX_W_0FFE_P_2, EVEX_W_0F380C_P_2, EVEX_W_0F380D_P_2,
EVEX_W_0F3811_P_1, EVEX_W_0F3812_P_1, EVEX_W_0F3813_P_1,
EVEX_W_0F3813_P_2, EVEX_W_0F3814_P_1, EVEX_W_0F3815_P_1,
EVEX_W_0F3818_P_2, EVEX_W_0F3819_P_2, EVEX_W_0F381A_P_2,
EVEX_W_0F381B_P_2, EVEX_W_0F381E_P_2, EVEX_W_0F381F_P_2,
EVEX_W_0F3821_P_1, EVEX_W_0F3822_P_1, EVEX_W_0F3823_P_1,
EVEX_W_0F3824_P_1, EVEX_W_0F3825_P_1, EVEX_W_0F3825_P_2,
EVEX_W_0F3828_P_2, EVEX_W_0F3829_P_2, EVEX_W_0F382A_P_1,
EVEX_W_0F382A_P_2, EVEX_W_0F3831_P_1, EVEX_W_0F3832_P_1,
EVEX_W_0F3833_P_1, EVEX_W_0F3834_P_1, EVEX_W_0F3835_P_1,
EVEX_W_0F3835_P_2, EVEX_W_0F3837_P_2, EVEX_W_0F383A_P_1,
EVEX_W_0F3840_P_2, EVEX_W_0F3858_P_2, EVEX_W_0F3859_P_2,
EVEX_W_0F385A_P_2, EVEX_W_0F385B_P_2, EVEX_W_0F3891_P_2,
EVEX_W_0F3893_P_2, EVEX_W_0F38A1_P_2, EVEX_W_0F38A3_P_2,
EVEX_W_0F38C7_R_1_P_2, EVEX_W_0F38C7_R_2_P_2, EVEX_W_0F38C7_R_5_P_2,
EVEX_W_0F38C7_R_6_P_2, EVEX_W_0F3A00_P_2, EVEX_W_0F3A01_P_2,
EVEX_W_0F3A04_P_2, EVEX_W_0F3A05_P_2, EVEX_W_0F3A08_P_2,
EVEX_W_0F3A09_P_2, EVEX_W_0F3A0A_P_2, EVEX_W_0F3A0B_P_2,
EVEX_W_0F3A18_P_2, EVEX_W_0F3A19_P_2, EVEX_W_0F3A1A_P_2,
EVEX_W_0F3A1B_P_2, EVEX_W_0F3A1D_P_2, EVEX_W_0F3A21_P_2,
EVEX_W_0F3A23_P_2, EVEX_W_0F3A38_P_2, EVEX_W_0F3A39_P_2,
EVEX_W_0F3A3A_P_2, EVEX_W_0F3A3B_P_2, EVEX_W_0F3A43_P_2.
(struct vex): Add fields evex, r, v, mask_register_specifier,
zeroing, ll, b.
(intel_names_xmm): Add upper 16 registers.
(att_names_xmm): Ditto.
(intel_names_ymm): Ditto.
(att_names_ymm): Ditto.
(names_zmm): New.
(intel_names_zmm): Ditto.
(att_names_zmm): Ditto.
(names_mask): Ditto.
(intel_names_mask): Ditto.
(att_names_mask): Ditto.
(names_rounding): Ditto.
(names_broadcast): Ditto.
(x86_64_table): Add escape to evex-table.
(reg_table): Include reg_table evex-entries from
i386-dis-evex.h.  Fix prefetchwt1 instruction.
(prefix_table): Add entries for new instructions.
(vex_table): Ditto.
(vex_len_table): Ditto.
(vex_w_table): Ditto.
(mod_table): Ditto.
(get_valid_dis386): Properly handle new instructions.
(print_insn): Handle zmm and mask registers, print mask operand.
(intel_operand_size): Support EVEX, new modes and sizes.
(OP_E_register): Handle new modes.
(OP_E_memory): Ditto.
(OP_G): Ditto.
(OP_XMM): Ditto.
(OP_EX): Ditto.
(OP_VEX): Ditto.
* i386-gen.c (cpu_flag_init): Update CPU_ANY_SSE_FLAGS and
CPU_ANY_AVX_FLAGS.  Add CPU_AVX512F_FLAGS, CPU_AVX512CD_FLAGS,
CPU_AVX512ER_FLAGS and CPU_AVX512PF_FLAGS.
(cpu_flags): Add CpuAVX512F, CpuAVX512CD, CpuAVX512ER,
CpuAVX512PF and CpuVREX.
(operand_type_init): Add OPERAND_TYPE_REGZMM,
OPERAND_TYPE_REGMASK and OPERAND_TYPE_VEC_DISP8.
(opcode_modifiers): Add EVex, Masking, VecESize, Broadcast,
StaticRounding, SAE, Disp8MemShift, NoDefMask.
(operand_types): Add RegZMM, RegMask, Vec_Disp8, Zmmword.
* i386-init.h: Regenerate.
* i386-opc.h (CpuAVX512F): New.
(CpuAVX512CD): New.
(CpuAVX512ER): New.
(CpuAVX512PF): New.
(CpuVREX): New.
(i386_cpu_flags): Add cpuavx512f, cpuavx512cd, cpuavx512er,
cpuavx512pf and cpuvrex fields.
(VecSIB): Add VecSIB512.
(EVex): New.
(Masking): New.
(VecESize): New.
(Broadcast): New.
(StaticRounding): New.
(SAE): New.
(Disp8MemShift): New.
(NoDefMask): New.
(i386_opcode_modifier): Add evex, masking, vecesize, broadcast,
staticrounding, sae, disp8memshift and nodefmask.
(RegZMM): New.
(Zmmword): Ditto.
(Vec_Disp8): Ditto.
(i386_operand_type): Add regzmm, regmask, zmmword and vec_disp8
fields.
(RegVRex): New.
* i386-opc.tbl: Add AVX512 instructions.
* i386-reg.tbl: Add 16 upper XMM and YMM registers, 32 new ZMM
registers, mask registers.
* i386-tbl.h: Regenerate.

GDB kills itself instead of interrupting inferior

When GDB is run with IO redirected to a pipe, the 'interrupt' command
causes it to kill its own process group instead of the inferior's.
The problem manifests itself in async mode, native debugging:

    $ cat | gdb <file>
    (gdb) set target-async on
    (gdb) run &
    (gdb) interrupt
    A debugging session is active.
    Inferior 1 [process 20584] will be killed.
    Quit anyway? (y or n) [answered Y; input not from terminal]

In this case, GDB tells that its stdin isn't a tty and doesn't save
the inferior's process group in
inflow.c:terminal_init_inferior_with_pgrp.  The 'interrupt' command
tries to 'kill' the inferior's process group in
`inf-ptrace.c:inf_ptrace_stop`, but since that wasn't saved in the
first place, GDB kills process group 0, meaning, its own process
group.

When GDB is used from a frontend, that means killing its own process
group including the frontend and possibly the X session.  This was
originally seen with SublimeGDB:
  https://github.com/quarnster/SublimeGDB/issues/29.

The patch makes GDB save the inferior pgid regardless of having a
terminal, as pgid is used not only to reset foreground process group,
but also to interrupt the inferior process.  It also adds a regression
test.  Luckily, we can emulate not having a terminal with "set
interactive-mode off", avoiding the need of special magic to spawn gdb
with a pipe.

Tested on x86_64 Fedora 17.

gdb/
2013-07-26  Cyril Nikolaev  <[email protected]>

* inflow.c (terminal_init_inferior_with_pgrp): Save inferior
process group regardless of having tty on stdin.

gdb/testsuite/
2013-07-26  Pedro Alves  <[email protected]>

* gdb.base/interrupt-noterm.c, gdb.base/interrupt-noterm.exp: New
files.

daily update

* linux-fork.h (detach_fork): Delete.

opcodes/
2013-07-25  Aaro Koskinen  <[email protected]>

PR gas/15220
* mips-opc.c (mips_builtin_opcodes): Fix wrong opcodes for
Loongson 2F madd.ps, msub.ps, nmadd.ps and nmsub.ps.

gas/testsuite/
* gas/mips/loongson-2f.d: Fix expected output for madd.ps,
msub.ps, nmadd.ps and nmsub.ps.

Support Intel SHA

gas/

2013-07-25  Michael Zolotukhin  <[email protected]>

* config/tc-i386.c (cpu_arch): Add .sha.
* doc/c-i386.texi: Document sha/.sha.

gas/testsuite/

2013-07-25  Michael Zolotukhin  <[email protected]>

* gas/i386/sha.d: New.
* gas/i386/sha.s: New.
* gas/i386/x86-64-sha.d: New.
* gas/i386/x86-64-sha.s: New.
* gas/i386/i386.exp: Run new SHA tests.

opcodes/

2013-07-25  Michael Zolotukhin  <[email protected]>

* i386-dis.c (PREFIX enum): Add PREFIX_0F38C8, PREFIX_0F38C9,
PREFIX_0F38CA, PREFIX_0F38CB, PREFIX_0F38CC, PREFIX_0F38CD,
PREFIX_0F3ACC.
(prefix_table): Updated.
(three_byte_table): Likewise.
* i386-gen.c (cpu_flag_init): Add CPU_SHA_FLAGS.
(cpu_flags): Add CpuSHA.
(i386_cpu_flags): Add cpusha.
* i386-init.h: Regenerate.
* i386-opc.h (CpuSHA): New.
(CpuUnused): Restored.
(i386_cpu_flags): Add cpusha.
* i386-opc.tbl: Add SHA instructions.
* i386-tbl.h: Regenerate.

Correct MPX ChangeLog entries

* elf64-ppc.c (struct ppc64_elf_obj_tdata): Replace opd_relocs
with a union.
(opd_entry_value): Cache .opd section contents.
(ppc64_elf_relocate_section): Adjust.

remove pop_target

This patch fixes the target double-close problem (PR remote/15266),
and in the process removes pop_target entire (PR remote/15256).

The first issue is that pop_target calls target_close.  However, it
then calls unpush_target, which also calls target_close.  This means
targets must be able to be closed twice.  Not only is this strange,
but it also directly contradicts the contract of to_xclose targets.
(We currently have just a single such target, and it is never pushed;
but I plan to add more, and so this latent bug is triggered.)

The second issue is that it seems to me that calling pop_target is
often unsafe.  This is what cropped up in 15256, where the remote
target assumed that it could pop_target -- but there was another
target higher on the stack, leading to confusion.

But, it is always just as easy to call unpush_target as it is to call
pop_target; and it is also safer.  So, removing pop_target seemed like
an improvement.

Finally, this adds an assertion to target_close to ensure that no
currently-pushed target can be closed.

Built and regtested on x86-64 Fedora 18; both natively and using the
native-gdbserver board file.

PR remote/15256, PR remote/15266:
* bfd-target.c (target_bfd_reopen): Initialize to_magic.
* monitor.c (monitor_detach): Use unpush_target.
* remote-m32r-sdi.c (m32r_detach): Use unpush_target.
* remote-mips.c (mips_detach): Use unpush_target.  Don't
call mips_close.
* remote-sim.c (gdbsim_detach): Use unpush_target.
* target.c (pop_target): Remove.
(pop_all_targets_above): Don't call target_close.
(target_close): Assert that the target is unpushed.
* target.h (pop_target): Don't declare.
* tracepoint.c (tfile_open): Use unpush_target.

don't call add_target for thread_db_ops

Right now, "help target" will include this line:

    target multi-thread -- Threads and pthreads support

However, it doesn't make sense to invoke "target multi-thread".

This patch fixes the problem by not registering the multi-thread
target.  add_target does some needed initialization of the target_ops,
so I broke this out into a new function.

It isn't clear to me whether this patch requires a test case or not.
I'm not sure whether there are other unregistered targets; but if
there are, it seems unlikely that we test for their absence from the
help.

Built and regtested on x86-64 Fedora 18.

* linux-thread-db.c (init_thread_db_ops): Call
complete_target_initialization.
(_initialize_thread_db): Don't call add_target.
* target.c (complete_target_initialization): New function.
(add_target_with_completer): Call it.
* target.h (complete_target_initialization): Declare.

2013-07-25  Mark Kettenis  <[email protected]>

        * hppa-tdep.h (enum hppa_regnum): Add members for all space registers.
        * hppaobsd-tdep.c (HPPAOBSD_SIZEOF_GREGS): Add comment.
        (HPPANBSD_SIZEOF_GREGS): New define.
        (hppaobsd_supply_gregset): Handle additional registers.
        * hppabsd-nat.c (hppabsd_gregset_supplies_p): Adjust to indicate
        we provide more registers now.
        (hppabsd_supply_gregset): Supply additional registers.
        (hppabsd_collect_gregset): Collect additional registers.

2013-07-25  Mark Kettenis  <[email protected]>

        * hppabsd-tdep.c: Include "dwarf2-frame.h".
        (hppabsd_dwarf2_frame_init_reg): New function.
        (hppabsd_init_abi): Hook in the DWARF CFI frame unwinder.

Resue 'z' formatter from mi register display code.

  http://sourceware.org/ml/gdb-patches/2013-07/msg00236.html

gdb/ChangeLog

        * mi/mi-main.c (output_register): Make MI 'r' format use standard
        'z' format code.  Remove error for optimized out values, standard
        code will handle these fine.

gdb/testsuite/ChangeLog

        * gdb.mi/mi-reg-undefined.exp: New file.
        * gdb.mi/mi-reg-undefined.c: Likewise.
        * gdb.mi/mi-reg-undefined.S: Likewise.

Add new 'z' format for print command.

  http://sourceware.org/ml/gdb-patches/2013-07/msg00235.html

gdb/ChangeLog

        * NEWS: Mention new 'z' formatter.
        * printcmd.c (print_scalar_formatted): Add new 'z' formatter.
        (_initialize_printcmd): Mention 'z' formatter in help text of the
        'x' command.

gdb/doc/ChangeLog

        * gdb.texinfo (Output Formats): Mention the new 'z' formatter.

gdb/testsuite/ChangeLog

        * gdb.base/printcmds.exp (test_print_int_arrays): Add tests for x,
        z, o, and t output formats.
        * gdb.base/display.exp: Use 'k' as an undefined format now that
        'z' is defined.

PR ld/15762
PR ld/12761
* elflink.c (elf_link_add_object_symbols): Correct test in
last patch.  Remove unnecessary code.

daily update

* mips-tdep.c (micromips_deal_with_atomic_sequence): Correct
formatting.

* boards/native-stdio-gdbserver.exp (${board}_build_remote_cmd): Pass
"--" to switch.

2013-07-24  Sergio Durigan Junior  <[email protected]>

* breakpoint.c (create_longjmp_master_breakpoint): Check if probe
interface can evaluate arguments.  Fallback to the old mode if it
cannot.
(create_exception_master_breakpoint): Likewise.
* elfread.c (elf_can_evaluate_probe_arguments): New function.
(struct sym_probe_fns elf_probe_fns): Export function above to the
probe interface.
* probe.c (can_evaluate_probe_arguments): New function.
* probe.h (struct probe_ops) <can_evaluate_probe_arguments>: New
function pointer.
(can_evaluate_probe_arguments): New function prototype.
* solib-svr4.c (svr4_create_solib_event_breakpoints): Check if
probe interface can evaluate arguments.  Fallback to the old mode
if it cannot.
* stap-probe.c (stap_get_probe_argument_count): Check if probe
interface can evaluate arguments.  Warning the user if it cannot.
(stap_can_evaluate_probe_arguments): New function.
(struct probe_ops stap_probe_ops): Export function above to the
probe interface.
* symfile.h (struct sym_probe_fns) <can_evaluate_probe_arguments>:
New function pointer.

Check .gnu.warning section in shared library

PR ld/15762
* ld-elf/shared.exp (build_tests): Check .gnu.warning section
in the libbarw.so library.
* ld-elf/libbarw.rd: New.

* lib/ld-lib.exp (run_cc_link_tests): Support checking on
output with warning message.

gdb/
* Makefile.in (SFILES): Add common/target-common.c.
Add common/target-common.h to headers.
(COMMON_OBS): Add target-common.o.
(target-common.o): New target.
* linux-nat.h (resume_kind): Move to common/target-common.h.
* target.c (target_waitstatus_to_string): Move to
common/target-common.c.
* target.h: Include target-common.h.
(target_waitkind): Move to common/target-common.h.
(target_waitstatus): Likewise.
(TARGET_WNOHANG): Likewise.
* common/target-common.c: New file.
* common/target-common.h: New file.

gdb/gdbserver/
* Makefile.in (SFILES): /common/target-common.c.
(OBS): Add target-common.o.
(server_h): Add $(srcdir)/../common/target-common.h.
(target-common.o): New target.
* server.c (queue_stop_reply_callback): Free
status string after use.
* target.c (target_waitstatus_to_string): Remove.
* target.h: Include target-common.h.
(resume_kind): Likewise.
(target_waitkind): Likewise.
(target_waitstatus): Likewise.
(TARGET_WNOHANG): Likewise.

Support Intel MPX

gas/

2013-07-24  Anna Tikhonova  <[email protected]>
    Kirill Yukhin  <[email protected]>
    Michael Zolotukhin  <[email protected]>

* config/tc-i386.c (BND_PREFIX): New.
(struct _i386_insn): Add new field bnd_prefix.
(add_bnd_prefix): New.
(cpu_arch): Add MPX.
(i386_operand_type): Add regbnd.
(md_assemble): Handle BND prefixes.
(parse_insn): Likewise.
(output_branch): Likewise.
(output_jump): Likewise.
(build_modrm_byte): Handle regbnd.
(OPTION_MADD_BND_PREFIX): New.
(md_longopts): Add entry for 'madd-bnd-prefix'.
(md_parse_option): Handle madd-bnd-prefix option.
(md_show_usage): Add description for madd-bnd-prefix
option.
* doc/c-i386.texi: Document mpx/.mpx and -madd-bnd-prefix.

gas/testsuite/

2013-07-24  Anna Tikhonova  <[email protected]>
    Kirill Yukhin  <[email protected]>
    Michael Zolotukhin  <[email protected]>

* gas/i386/mpx-add-bnd-prefix.s: New.
* gas/i386/mpx-add-bnd-prefix.d: New.
* gas/i386/mpx-inval-1.l: New.
* gas/i386/mpx-inval-1.s: New.
* gas/i386/mpx.d: New.
* gas/i386/mpx.s: New.
* gas/i386/x86-64-mpx-add-bnd-prefix.d: New.
* gas/i386/x86-64-mpx-add-bnd-prefix.s: New.
* gas/i386/x86-64-mpx-addr32.d: New.
* gas/i386/x86-64-mpx-addr32.s: New.
* gas/i386/x86-64-mpx-inval-1.l: New.
* gas/i386/x86-64-mpx-inval-1.s: New.
* gas/i386/x86-64-mpx-inval-2.l: New.
* gas/i386/x86-64-mpx-inval-2.s: New.
* gas/i386/x86-64-mpx.d: New.
* gas/i386/x86-64-mpx.s: New.
* gas/i386/nops.d: Adjust to MPX changes.
* gas/i386/nops.s: Likewise.
* gas/i386/x86-64-nops.d: Likewise.
* gas/i386/x86-64-nops.s: Likewise.
* gas/i386/ilp32/x86-64-nops.d: Likewise.
* gas/i386/i386.exp: Run new MPX tests.

include/opcode/

2013-07-24  Anna Tikhonova  <[email protected]>
    Kirill Yukhin  <[email protected]>
    Michael Zolotukhin  <[email protected]>

* i386.h (BND_PREFIX_OPCODE): New.

opcodes/

2013-07-24  Anna Tikhonova  <[email protected]>
    Kirill Yukhin  <[email protected]>
    Michael Zolotukhin  <[email protected]>

* i386-dis.c (BND_Fixup): New.
(Ebnd): New.
(Ev_bnd): New.
(Gbnd): New.
(BND): New.
(v_bnd_mode): New.
(bnd_mode): New.
(MOD enum): Add new entries.
(PREFIX enum): Likewise.
(dis tables): Replace XX with BND for near branch and call
instructions.
(prefix_table): Add new entries.
(mod_table): Likewise.
(names_bnd): New.
(intel_names_bnd): New.
(att_names_bnd): New.
(BND_PREFIX): New.
(prefix_name): Handle BND_PREFIX.
(print_insn): Initialize names_bnd.
(intel_operand_size): Handle new modes.
(OP_E_register): Likewise.
(OP_E_memory): Likewise.
(OP_G): Likewise.
* i386-gen.c (cpu_flag_init): Add CpuMPX.
(cpu_flags): Add CpuMPX.
(operand_type_init): Add RegBND.
(opcode_modifiers): Add BNDPrefixOk.
(operand_types): Add RegBND.
* i386-init.h: Regenerate.
* i386-opc.h (CpuMPX): New.
(CpuUnused): Comment out.
(i386_cpu_flags): Add cpumpx.
(BNDPrefixOk): New.
(i386_opcode_modifier): Add bndprefixok.
(RegBND): New.
(i386_operand_type): Add regbnd.
* i386-opc.tbl: Add BNDPrefixOk to near jumps, calls and rets.
Add MPX instructions and bnd prefix.
* i386-reg.tbl: Add bnd0-bnd3 registers.
* i386-tbl.h: Regenerate.

* dwarf2read.c (lookup_dwo_cutu): Change missing DWO complaint to
a warning.

bfd/
2013-07-24  Tristan Gingold  <[email protected]>

        * coff-rs6000.c (xcoff_howto_table): Fix masks and pc_relative for
        R_RBR.  Add numbers in comments.
        (_bfd_xcoff_reloc_type_lookup): Handle BFD_RELOC_PPC_B16.
        * coff64-rs6000.c: Likewise.

gas/
2013-07-24  Tristan Gingold  <[email protected]>

        * config/tc-ppc.c (md_apply_fix): Adjust BFD_RELOC_PPC_B16 on
        xcoff targets.

gas/testsuite/
2013-07-24  Tristan Gingold  <[email protected]>

        * gas/ppc/test2xcoff32.s, gas/ppc/test2xcoff32.d: New files
        * gas/ppc/ppc.exp: Add new test.
        * gas/ppc/xcoff-br16-1.s, gas/ppc/xcoff-br16-1.d,
        gas/ppc/xcoff-br16-2.s, gas/ppc/xcoff-br16-2.d: New files
        * gas/ppc/aix.exp: Add new tests.

gdb/testsuite/

* gdb.mi/mi-var-cmd.exp: If host is remote, use ${testfile} on
host.
* gdb.mi/mi-basics.exp (test_exec_and_symbol_mi_operatons):
Likewise.  If host is remote, copy ${binfile} to host.

2013-07-24  Andreas Krebbel  <[email protected]>

* config/tc-s390.c (s390_machine): Don't force the .machine
argument to lower case.

daily update

oops - omitted from previous delta

gdb/

* i386-tdep.c (i386_in_stack_tramp_p): Remove unused
parameter 'gdbarch'.
(i386_stack_tramp_frame_sniffer): Caller update.
* i386-linux-tdep.c (i386_linux_core_read_xcr0): Remove
parameter 'gdbarch' and 'target'.
(i386_linux_core_read_description): Caller update.
* amd64-linux-tdep.c (amd64_linux_core_read_description):
Likewise.
* i386-linux-tdep.h (i386_linux_core_read_xcr0): Update
declaration.

* dwarf2read.c (init_cutu_and_read_dies): Revert patch from
2013-07-22.

gdb/testsuite/

* gdb.mi/mi-var-cmd.exp: Adjust pattern to match current error
message.

daily update

Fix the following ChangeLog entry:

2013-07-22  Doug Evans  <[email protected]>

gdb/
* exec.h (remove_target_sections): Delete arg abfd.
* exec.c (exec_close): Update call to remove_target_sections.
(remove_target_sections): Delete arg abfd.
* solib.c (update_solib_list): Ditto.
(reload_shared_libraries_1): Ditto.
(clear_solib): Ditto, and unconditionally call remove_target_sections.
* target.h (struct target_section): Rename key to owner.
All uses updated.

2013-07-22  Doug Evans  <[email protected]>

gdb/
* exec.h (remove_target_sections): Delete arg abfd.
* exec.c (remove_target_sections): Delete arg abfd.
(exec_close): Update call to remove_target_sections.
* solib.c (update_solib_list): Ditto.
(reload_shared_libraries_1): Ditto.
(clear_solib): Ditto, and unconditionally call remove_target_sections.

merge from gcc

fix solib-som.c

som_open_symbol_file_object was leaking a cleanup.

* solib-som.c (som_open_symbol_file_object): Call do_cleanups.

fix init_cutu_and_read_dies

init_cutu_and_read_dies creates an outer cleanup and uses its
immediately nested inner cleanup conditionally.  This seems overly
complicated to me; simpler is to just deal with the outer cleanup and
drop the inner one.  That is what this patch implements.

* dwarf2read.c (init_cutu_and_read_dies): Remove 'free_cu_cleanup'.
Simplify cleanup handling.

fix dwarf_decode_line_header

dwarf_decode_line_header has one return that is missing a call to
do_cleanups.  This patch adds it.

This was found using the cleanup checker.

* dwarf2read.c (dwarf_decode_line_header): Call do_cleanups
on all return paths.

src-release: Fix VER computation for TOOL=gdb

Without this patch, the DATE marker in gdb/version.in does not get
replaced by the source packaging date, causing the name of the
tarball being created to: have the DATE marker in the tarball
name and the name of the directory the sources unpack to (Eg:
gdb-7.6.50-DATE-cvs.tar instead of gdb-7.6.50-20130710-cvs.tar).

ChangeLog:

        * src-release (VER): Use $(TOOL)/common/create-version.sh
        if it exists.

2013-07-22  Edjunior Barbosa Machado  <[email protected]>

* ppc-linux-nat.c (PPC_DEBUG_FEATURE_DATA_BP_DAWR): New define.
(ppc_linux_region_ok_for_hw_watchpoint): Add checking to use the new
DAWR interface for longer ranges hardware watchpoint (up to 512 bytes).

oops - omitted fromn previous delta

* ld-scripts/script.exp: Use run_dump_test instead of
ld_simple_link to check the error message.
* ld-scripts/align-with-input.d: New file.
* ld-scripts/region-alias-1.d: Likewise.
* ld-scripts/region-alias-2.d: Likewise.
* ld-scripts/region-alias-3.d: Likewise.
* ld-scripts/region-alias-4.d: Likewise.

2013-07-22  Phil Muldoon  <[email protected]>

* top.c (print_gdb_version): Add help, apropos description and
url to online documentation.

2013-07-22  Kyrylo Tkachov  <[email protected]>

* config/tc-arm.c (s_arm_arch_extension): Improve error message
for invalid extension.

daily update

merge from gcc

daily update

PR ld/15762
PR ld/12761
* elflink.c (elf_link_add_object_symbols): Don't clobber
.gnu.warning.symbol sections when shared.

daily update

gold/
* options.h (General_options): Add -Trodata-segment option.
* parameters.cc (Parameters::check_rodata_segment): New function.
(Parameters::set_target_once): Call it.
* parameters.h (Parameters): Declare it (private member function).
* layout.cc (load_seg_unusable_for_headers): New function, broken
out of Layout::relaxation_loop_body.  If TARGET->isolate_execinstr()
then validate rodata segment rather than text segment.
(relaxation_loop_body): Call that.
(is_text_segment): New function.  Don't admit a non-executable
segment if TARGET->isolate_execinstr().
(set_segment_offsets): Call it.  Honor -Trodata-segment option.

[AArch64, ILP32] Retire -milp32 and -mlp64; use -mabi=ilp32 and -mabi=lp64.

gas/

* config/tc-aarch64.c (enum aarch64_abi_type): New enumeration tag.
(AARCH64_ABI_LP64, AARCH64_ABI_ILP32): New enumerators.
(aarch64_abi): New variable.
(ilp32_p): Change to be a macro.
(aarch64_opts): Remove the support for option -milp32 and -mlp64.
(struct aarch64_option_abi_value_table): New struct.
(aarch64_abis): New table.
(aarch64_parse_abi): New function.
(aarch64_long_opts): Add entry for -mabi=.
* doc/as.texinfo (Target AArch64 options): Document -mabi.
* doc/c-aarch64.texi: Likewise.

gas/testsuite/

* gas/aarch64/ilp32-basic.d (#as): Update to use -mabi=ilp32

oops - omitted from previous delta

* elf32-rx.c (rx_elf_relocate_section): Fix typo: move
saw_subtract from R_RX_OPdiv to R_RX_OPneg.

PR binutils/15745
* readelf.c (get_unwind_section_word): Whilst searching for a
reloc section associated with an unwind section, check the type as
well as the section number.

* ldgram.y: Add ALIGN_WITH_INPUT output section attribute.
* ldlang.c: Likewise.
* ldlang.h: Likewise.
* ldlex.l: Likewise.
* mri.c: Likewise.
* ld.texinfo: Document new feature.
* NEWS: Mention new feature.

* ld-scripts/script.exp: Run align with input test.
* ld-scripts/align-with-input.t: New file.
* ld-scripts/rgn-at8.d: Likewise.
* ld-scripts/rgn-at8.t: Likewise.

gdb/testsuite/gdb.base: Enable disp-step-syscall.exp tests for ARM.

disp-step-syscall.exp is not run for ARM targets because ARM syscall
instructions have not been added to the list of possible syscall
instructions. This patch adds ARM syscall instructions to enable
disp-step-syscall.exp tests for ARM targets. Attached patch is tested
on ARMv7 and helps pass all disp-step-syscall.exp tests for ARM
targets.

gdb/testsuite/ChangeLog:

2013-07-19  Omair Javaid  <[email protected]>

* gdb.base/disp-step-syscall.exp: Add svc and swi syscall
instructions and enable disp-step-syscall for arm targets.

gdb/testsuite/gdb.dwarf2: Replace @ with % for ARM compatability.

The ARM assembler recognises @ symbol as a comment marker and
therefore is unable to assemble some of gdb.dwarf2 testsuite tests.
This patch replaces all occurrences of @ symbol with % sign to allow
tests stay compatible with both ARM and x86 assembly. This patch has
been tested on x86_64 and ARMv7 targets.

gdb/testsuite/ChangeLog:

2013-07-19  Omair Javaid  <[email protected]>

        * gdb.dwarf2/fission-reread.S: Replace @ sign with % sign to remove
        assembler errors on arm.
        * gdb.dwarf2/mac-fileno.S: Likewise.
        * gdb.dwarf2/member-ptr-forwardref.S: Likewise.
        * gdb.dwarf2/pr13961.S: Likewise.

2013-07-19  Hui Zhu  <[email protected]>

PR gdb/15692
* mi/mi-cmd-break.c (mi_argv_to_format): Handle double quotes.

2013-07-19  Hui Zhu  <[email protected]>

PR gdb/15692
* gdb.mi/mi-dprintf.exp: Add double quotes test.

daily update

gdb/

* target.c (update_current_target): Change the default action
of 'to_traceframe_info' from tcomplain to return_zero.
* target.h (struct target_ops) <to_traceframe_info>: Add more
comments.
* valops.c (read_value_memory): Call
traceframe_available_memory unconditionally.

gdb/testsuite/

* gdb.trace/read-memory.exp (test_from_remote): Update test.
(teset_from_exec): Likewise.

gdb/testsuite/

* gdb.trace/read-memory.c: New.
* gdb.trace/read-memory.exp: New.

gdb/testsuite/

* lib/gdb.exp (gdb_compile_shlib): Pass the tail name of
$dest to link options if host is remote.  Move the
generated file to $dest.a on host if host is remote.

* ar.c (usage): Fix C conformance issue.

* config/tc-i386-intel.c (i386_intel_operand): Fixed signed vs
unsigned comparison.

gdb/testsuite/gdb.threads: Ensure TLS tests link against pthreads.

On Ubuntu by default the compiler passes --as-needed to ld which
means no DT_NEEDED entry is added for libpthread when building
the TLS tests. This causes the test to fail as libpthread is
required to look up TLS variables. Add calls to pthread_testcancel
to make sure libpthread gets linked.

gdb/testsuite/ChangeLog:

2013-07-18  Will Newton  <[email protected]>

* gdb.threads/tls-nodebug.c: Call pthread_testcancel
to ensure the test is linked against pthreads.
* gdb.threads/tls-var-main.c: Likewise.
* gdb.threads/tls-shared.c: Likewise.

* doc/binutils.texi (nm, objdump): Remove bogus links to STABS
documentation.

PR ld/15721
* elf32-msp430.c (R_MSP430_10_PCREL): Use 10-bit source and
destination masks.
* R_MSP430_2X_PCREL: Likewise.
* R_MSP430X_10_PCREL: Likewise.
* R_MSP430X_2X_PCREL: Likewise.

PR binutils/15728
* basic-ops.h: (SUBWORDSIQI) Make declaration static.
* (SUBWORDSIHI): Likewise.
* (SUBWORDDIQI): Likewise.
* (SUBWORDDIHI): Likewise.
* (SUBWORDDISI): Likewise.

    * config/rx-defs.h: Add macros for RX100, RX200, RX600, and
RX610.
        * config/rx-parse.y: (rx_check_float_support): Add function to
check floating point operation support for target RX100 and
RX200.
        * config/tc-rx.c: Add CPU options RX100, RX200, RX600, and RX610.
        * doc/c-rx.texi: Add -mcpu option to recognize macros for RX100,
        RX200, RX600, and RX610

    * elf32-arm.c (arm_type_of_stub): Don't use ST_BRANCH_TO_ARM for
thumb only targets.
        (elf32_arm_final_link_relocate): Likewise.

        * ld-arm/thumb-b-lks-sym.d: Updated to be more flexible.
        * ld-arm/thumb-bl-lks-sym.d: Likewise.

* config/tc-avr.c (md_show_usage): Add avrxmega2 to help text

* config/tc-avr.c: Make ata6289's ISA to AVR_ISA_AVR4.
* doc/c-avr.texi: Likewise.

* mach-o.c (mach_o_section_name_xlat dw): Add entry for
.debug_gdb_scripts

* elf32-arm.c (elf32_arm_stub_long_branch_arm_nacl): New variable.
(elf32_arm_stub_long_branch_arm_nacl_pic): New variable.
(arm_build_one_stub): Increase MAXRELOCS to 3.
(arm_type_of_stub): Use them if GLOBALS->nacl_p.
(struct elf32_arm_link_hash_table): Give add_stub_section member's
pointee type a third argument.
(elf32_arm_create_or_find_stub_sec): Update caller.
(elf32_arm_size_stubs): Update argument type.
* bfd-in.h (elf32_arm_size_stubs): Update decl.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.

* emultempl/armelf.em (elf32_arm_add_stub_section): Take third
argument ALIGNMENT_POWER, use it instead of constant 3.

* ld-arm/farcall-arm-nacl.d: New file.
* ld-arm/farcall-arm-nacl-pic.d: New file.
* ld-arm/farcall-data-nacl.d: New file.
* ld-arm/arm-elf.exp (armeabitests_common): Add extra element to
"action" lists for those cases to use a different dump file for NaCl
targets.
Massage $armeabitests_common to drop the extra element or the one
before it, depending on [istarget "arm*-*-nacl*"].

* ld-arm/arm-elf.exp (armelftests_common): Move all "Cortex-A8
erratum fix", Thumb-only and interworking cases to ...
(armelftests_nonacl): ... here.
(armeabitests_common): Move all "erratum 760522 fix", Thumb-only
and interworking cases to ...
(armeabitests_nonacl): ... here.

* readelf.c (process_unwind): Do not return the result of a void
function.

gdb/testsuite/

* lib/future.exp (gdb_default_target_compile): Use tail name
of $destfile as the output name of compile.  Move the
generated file to $destfile on build.

gdb/testsuite/

* lib/gdb.exp (gdb_compile): Set
gdb_saved_set_unbuffered_mode_obj to
set_unbuffered_mode_saved.o if host is remote.  Invoke
remote_download to copy $unbuf_obj to host.

gdb/
Commit the changelog change for my previous commit.

gdb/
* coffread.c (coff_symfile_read): Iterate over minimal symbols,
if the name is prefixed by "__imp_" or "_imp_", look for minimal
symbol without prefix.  If found, set its type to
'mst_solib_trampoline'.

daily update

* NEWS: Mention "set print raw frame-arguments".
* gdbcmd.h (setprintrawlist, showprintrawlist): Declare.
* stack.c (print_raw_frame_arguments): New static global.
(print_frame_arg): Set opts.raw from print_raw_frame_arguments.
(_initialize_stack): New command "set/show print raw frame-arguments".
* valprint.c (setprintrawlist, showprintrawlist): New globals.
(set_print_raw, show_print_raw): New functions.
(_initialize_valprint): New prefix command "set/show print raw".
* valprint.h (value_print_options): Improve comments.

doc/
* gdb.texinfo (Print Settings): Document "print raw frame-arguments".

testsuite/
* gdb.python/py-frame-args.c: New file.
* gdb.python/py-frame-args.py: New file.
* gdb.python/py-frame-args.exp New file.

* cli/cli-cmds.c (init_cmd_lists): Delete unnecessary initialization
of all *list variables.

* gdbcmd.h (togglelist): Delete.
* cli/cli-cmds.c (togglelist): Delete.
(init_cmd_lists): Update.
* cli/cli-cmds.h (togglelist): Delete.

* dwarf2read.c (dwarf2_per_objfile_free): Clear
dwarf2_per_objfile.

opcodes/
* mips-formats.h (MAPPED_INT, MAPPED_REG, REG_PAIR): Add
ATTRIBUTE_UNUSED.