gas/
* doc/c-arm.texi: Document .arch armv7e-m.
* config/tc-arm.c (arm_ext_v6_dsp, arm_ext_v7m): New.
(insns): Put Thumb versions of v5TExP instructions into
arm_ext_v5exp also. Move some Thumb variants from
arm_ext_v6_notm to arm_ext_v6_dsp.
(arm_archs): Add armv7e-m architecture.
(aeabi_set_public_attributes): Handle -march=armv7e-m.
gas/testsuite/
* gas/arm/attr-march-armv7em.d: New test.
* gas/arm/arch7em-bad.d: New test.
* gas/arm/arch7em-bad.l: New test.
* gas/arm/arch7em.d: New test.
* gas/arm/arch7em.s: New test.
Ulrich Weigand [Tue, 17 Nov 2009 13:37:01 +0000 (13:37 +0000)]
* elf32-spu.c (struct spu_link_hash_table): Remove overlay_fixed,
reserved, and extra_stack_space members.
(spu_elf_auto_overlay): Use auto_overlay_fixed, auto_overlay_reserved,
and extra_stack_space members of htab->params instead.
Alexandre Oliva [Mon, 16 Nov 2009 18:42:37 +0000 (18:42 +0000)]
* configure.ac: Add libelf to host_libs. Enable in-tree configury
of ppl and cloog. Fix in-tree configury of libelf, skip tests.
Fix portability of test of C++ as bootstrap language. Add
ppl/src/ppl-config.o to the bootstrap compare exclusion list.
* configure: Rebuild.
* Makefile.def: Drop host and target settings from gmp, mpfr, ppl,
and cloog. Fix in-tree ppl configuration. Introduce libelf
in-tree building.
* Makefile.tpl (POSTSTAGE1_CXX_EXPORT): New.
(POSTSTAGE1_HOST_EXPORTS): Use it.
(STAGE[+id+]_CXXFLAGS): New.
(BASE_FLAGS_TO_PASS): Pass it down.
(configure-stage[+id+]-[+prefix+][+module+]): Use it. Add
extra_exports.
(all-stage[+id+]-[+prefix+][+module+]): Likewise.
(configure-[+prefix+][+module+], all-[+prefix+][+module+]): Add
extra_exports.
* Makefile.in: Rebuild.
* configure.ac (FLAGS_FOR_TARGET): Add -L and -isystem
paths for *-w64-mingw* and x86_64-*mingw*.
* configure: Regenerated.
* configure.ac: Disable target-winsup & co for
x86_64-*-mingw* and *-w64-mingw* targets.
* configure: Regenerated.
* configure.ac (CLooG test): Use = with test.
* configure: Regenerate.
* configure.ac: Do not set LIBS for ppl/cloog checks. Disable
cloog if the ppl version check failed. Move flags saving
before setting in libelf check.
* configure: Regenerate.
* configure.ac: Adjust the ppl and cloog configure to work as
documented. Disable cloog if ppl was disabled. Omit the version
checks if they were disabled.
* configure: Re-generate.
Pedro Alves [Mon, 16 Nov 2009 18:15:05 +0000 (18:15 +0000)]
* linux-low.c (linux_remove_process): Add `detaching' parameter.
Pass it to thread_db_free.
(linux_kill, linux_detach, linux_wait_1): Adjust to pass the
proper `detaching' argument to linux_remove_process.
* linux-low.h (thread_db_free): Add `detaching' parameter.
* thread-db.c (thread_db_init): Pass false as `detaching' argument
to thread_db_free.
(thread_db_free): Add `detaching' parameter. Only
call td_ta_clear_event if detaching from process.
* arm.cc (Target_arm::may_use_arm_nop): New method definition.
(Arm_relocate_functions::arm_branch_common): Change method defintion
in class definition to a method declaration and update list of formal
parameters.
(Arm_relocate_functions::plt32, Arm_relocate_functions::call,
Arm_relocation_functions::jump24): Adjust call to
Arm_relocate_functions::arm_branch_common. Update list of formal
parameters.
(Arm_relocate_functions::xpc25): New method definition.
(Arm_relocate_functions::arm_branch_common): Move method defintion
out from class definition. Use stubs for mode-switching and extending
branch ranges.
(Target_arm::Relocate::relocate): Handle weakly-undefined symbols
specially. Change code to enable use of stubs in ARM branches.
Pedro Alves [Sun, 15 Nov 2009 20:10:34 +0000 (20:10 +0000)]
* infrun.c (handle_inferior_event): When handling a fork or vfork
event, check if the bpstat causes a stop, instead of if it
explains the signal.
* breakpoint.c (bpstat_causes_stop): New.
* breakpoint.h (bpstat_causes_stop): Declare.
Pedro Alves [Sun, 15 Nov 2009 20:08:03 +0000 (20:08 +0000)]
* breakpoint.c (should_be_inserted): Don't insert breakpoints if
the pspace doesn't allow breakpoints.
(insert_breakpoint_locations): Remove waiting_for_vfork_done
special case. Expect watchpoints that shouldn't be inserted, to
not be inserted.
* progspace.h (struct program_space) <breakpoints_not_allowed>:
New field.
* infrun.c (handle_inferior_event): Clear it.
* linux-nat.c (linux_child_follow_fork): Set it.
* lib/gdb.exp (current_target_name): New procedure.
(gdb_wrapper_target): New variable.
(gdb_wrapper_init): Set gdb_wrapper_target.
(default_gdb_init): Check gdb_wrapper_target before rebuilding the
wrapper.
* remote-fileio.c (remote_fileio_request): Send Ctrl-C if it is
pending.
* remote-fileio.h: Update the prototype for remote_fileio_request.
* remote.c (struct remote_state): Add ctrlc_pending_p.
(remote_open_1): Clear ctrlc_pending_p.
(remote_stop_as): Set ctrlc_pending_p to 1.
(remote_wait_as): Pass ctrlc_pending_p to remote_fileio_request.
gdb/testsuite/
* gdb.cp/formatted-ref.exp (test_p_x_ref_addr): Allow the reference
to be in memory.
* gdb.base/display.c (force_mem): New.
(do_loops): Use it. Add breakpoint comments.
(do_vars): Add a breakpoint comment.
* gdb.base/display.exp: Use gdb_get_line_number. Remove hardcoded
line numbers.
* i386-dis.c (ckprefix): Updated to return 0 if number of
prefixes > 14 and record the last position for each prefix.
(lock_prefix): Removed.
(data_prefix): Likewise.
(addr_prefix): Likewise.
(repz_prefix): Likewise.
(repnz_prefix): Likewise.
(last_lock_prefix): New.
(last_repz_prefix): Likewise.
(last_repnz_prefix): Likewise.
(last_data_prefix): Likewise.
(last_addr_prefix): Likewise.
(last_rex_prefix): Likewise.
(last_seg_prefix): Likewise.
(MAX_CODE_LENGTH): Likewise.
(ADDR16_PREFIX): Likewise.
(ADDR32_PREFIX): Likewise.
(DATA16_PREFIX): Likewise.
(DATA32_PREFIX): Likewise.
(REP_PREFIX): Likewise.
(seg_prefix): Likewise.
(all_prefixes): Change size to MAX_CODE_LENGTH - 1.
(prefix_name): Handle ADDR16_PREFIX, ADDR32_PREFIX,
DATA16_PREFIX, DATA32_PREFIX and REP_PREFIX.
(get_valid_dis386): Updated.
(OP_C): Likewise.
(OP_Monitor): Likewise.
(REP_Fixup): Likewise.
(print_insn): Display all prefixes.
(putop): Set PREFIX_DATA on used_prefixes only if it is used.
(intel_operand_size): Likewise.
(OP_E_register): Likewise.
(OP_G): Likewise.
(OP_REG): Likewise.
(OP_IMREG): Likewise.
(OP_I): Likewise.
(OP_I64): Likewise.
(OP_sI): Likewise.
(CRC32_Fixup): Likewise.
(MOVBE_Fixup): Likewise.
(OP_E_memory): Set REFIX_DATA on used_prefixes when it is used
in 16bit mode.
(OP_J): Set REX_W used if it is used. Set PREFIX_DATA on
used_prefixes only if it is used.
Doug Evans [Fri, 13 Nov 2009 18:51:08 +0000 (18:51 +0000)]
* dcache.c (dcache_block): Replace member newer with next,prev.
(dcache_struct): Delete member newest.
(block_func): New typedef.
(append_block, remove_block, for_each_block): New functions.
(invalidate_block, free_block): New functions.
(dcache_invalidate): Update
(dcache_invalidate_line, dcache_alloc): Update to use new list
accessors.
(dcache_free): Ditto. Fix memory leak.
testsuite/
* lib/gdb.exp (gdb_test_multiple): Handle "y or [n]", "[y] or n",
and the breakpoint menu. Do not call perror if a prompt is seen.
Consume the following GDB prompt.
* gdb.cp/method2.exp (test_break): Use gdb_test_multiple.
* gdb.cp/namespace.exp: Use gdb_test.
* gdb.cp/templates.exp: Use gdb_test.
(test_template_breakpoints): Use gdb_test_multiple.
* c-typeprint.c (c_type_print_base): Skip artificial fields.
Use get_vptr_fieldno to skip the vtable pointer.
* dwarf2read.c (dwarf2_add_field): Set FIELD_ARTIFICIAL on artificial
fields.
(dwarf2_add_member_fn): Complain about virtual member functions
without DW_AT_vtable_elem_location and force TYPE_CPLUS_DYNAMIC.
* gdbtypes.c (get_vptr_fieldno): Update comment.
* gdbtypes.h (struct cplus_struct_type): Add is_dynamic.
(TYPE_CPLUS_DYNAMIC): New macro.
* gnu-v3-abi.c (gnuv3_dynamic_class): New.
(gnuv3_get_vtable): Rewrite to use gnuv3_dynamic_class. Move higher.
(gnuv3_rtti_type, gnuv3_get_virtual_fn, gnuv3_baseclass_offset): Use
gnuv3_get_vtable.
* varobj.c (cplus_class_num_children, cplus_describe_child): Skip
artificial fields. Use get_vptr_fieldno to skip the vtable pointer.
* dwarf2read.c (struct field_info): Add baseclasses.
(dwarf2_add_field): Add base classes to a separate list.
(dwarf2_attach_fields_to_type): Merge base classes and fields.
* dwarf2read.c (process_psymtab_comp_unit): Initialize per_cu backlink
at the same time as the forward link.
(load_partial_comp_unit): Initialize per_cu links before calling
init_cu_die_reader.
gas/testsuite/
* gas/arm/copro.d, gas/arm/fp-save.d, gas/arm/float.d,
gas/arm/fpa-mem.d: Update for removed generic coprocessor instructions
and expanded PC-relative offsets.
opcodes/
* arm-dis.c (coprocessor_opcodes): Use %A instead of %C. Remove
generic coprocessor instructions for FPA loads and stores.
(print_insn_coprocessor): Remove %C support. Display address for
PC-relative offsets in %A.
Keith Seitz [Wed, 11 Nov 2009 23:33:51 +0000 (23:33 +0000)]
* gdb.cp/classes.cc (ByAnyOtherName): Add typedef and
use it instead of "Foo".
* gdb.cp/classes.exp (do_tests): Add a test to access
a method through a typedef'd class name.
Keith Seitz [Wed, 11 Nov 2009 16:45:46 +0000 (16:45 +0000)]
* c-expy. (operator_stoken): New function.
(OPERATOR): New token.
(NEW): New token.
(DELETE): New token.
(operator): New rule.
(name): Add operator.
(ident_tokens): Add "new", "delete", and "operator".
* gdbtypes.c (rank_one_type): Don't complain about
void pointer conversion badness if both types are
void pointers.
Keith Seitz [Wed, 11 Nov 2009 16:45:16 +0000 (16:45 +0000)]
* gdb.cp/cplusfuncs.cc (class foo): Add operators
new[] and delete[].
* gdb.cp/cplusfuncs.exp (dm_type_void): Change to
"void".
(probe_demangler): Remove all single-quoting of
method and variable names.
(info_func_regexp): Remove the word "void" from any
occurrence of "(void)".
(print_addr_2): Remove all single-quoting of
method names.
(print_addr_2_kfail): Likewise.
(print_addr): Single-quote C function names before
passing to print_addr_2.
(test_paddr_operator_functions): Remove single-quoting
for method names.
Add tests for operator new[] and operator delete[].
Nick Clifton [Wed, 11 Nov 2009 09:44:45 +0000 (09:44 +0000)]
PR binutils/10924
* arm-dis.c (UNPREDICTABLE_INSTRUCTION): New macro.
(print_insn_arm): Extend %s format control code to check for
unpredictable addressing modes. Add support for %S format control
code which suppresses this check.
(W_BIT, I_BIT, U_BIT, P_BIT): New macros.
(WRITEBACK_BIT_SET, IMMEDIATE_BIT_SET, NEGATIVE_BIT_SET,
PRE_BIT_SET): New macros.
(print_insn_coprocessor): Use the new macros instead of magic
constants.
(print_arm_address): Likewise.
(pirnt_insn_arm): Likewise.
(print_insn_thumb32): Likewise.
Jan Kratochvil [Wed, 11 Nov 2009 05:04:34 +0000 (05:04 +0000)]
gdb/
* symfile.c (separate_debug_file_exists): Change parameter parent_name
to parent_objfile. New variables parent_stat and abfd_stat. Call
strcmp and then bfd_stat functions to verify if NAME matches.
(find_separate_debug_file): Update the passed parameter at caller.
Jan Kratochvil [Wed, 11 Nov 2009 04:54:32 +0000 (04:54 +0000)]
binutils/
* configure.in: Stop checking for fopen64 and stat64.
* strings.c (file_off, file_open, statbuf, file_stat): Remove.
(strings_file): Change file_off to file_ptr, file_open to fopen,
statbuf to struct stat and file_stat to stat.
(get_char): Change parameter type file_off * to file_ptr *.
(print_strings): Change parameter and variable `start' type file_off to
file_ptr.
* configure: Regenerate.
* config.in: Regenerate.
Keith Seitz [Tue, 10 Nov 2009 22:17:58 +0000 (22:17 +0000)]
* c-exp.y: Add new rule for resolving method overloads.
* eval.c (make_params): New function.
(free_param_types): New function.
(evaluate_subexp_standard): Pass expect_type to value_aggregate_elt.
Handle case TYPE_INSTANCE.
(evaluate_subexp_for_address): Pass expect_type to value_aggregate_elt.
* expression.h (enum exp_opcode): Add TYPE_INSTANCE.
(compare_parameters): Add declaration.
* parse.c (operator_length_standard): Add TYPE_INSTANCE.
* valops.c (value_aggregate_elt): Add new expect_type parameter.
Pass expect_type to value_struct_elt_for_reference.
(value_struct_elt_for_reference): Add expect_type parameter and use
compare_parameters.
Check for overload matches with and without artificial parameters.
Skip artificial methods.
(compare_parameters): New function.
* value.h (value_aggregate_elt): Add new expect_type parameter.
projects / binutils.git / log