* infcmd.c (kill_if_already_running): Make static.  Use
target_require_runnable.
* target.c (target_require_runnable): New.
* target.h (target_require_runnable): Declare.

* gdb.texinfo (Starting): Mention always-running targets.
(Target Commands): Add an anchor for load.
(Connecting): Explain continue instead of run.

* frame.c (reinit_frame_cache): Only annotate if frames were
previously valid.

* gdb.base/annota1.exp, gdb.cp/annota2.exp: Update for fewer
frames-invalid annotations.

2008-02-28  Pierre Muller  <[email protected]>

* gdb.base/assign.exp: avoid same output for different tests.

* elf32-spu.c (mark_functions_via_relocs): Don't assume that
the "->start" pointer reaches to function origin, so that we
can handle functions split over more than two sections.
(build_call_tree): Likewise.
(pasted_function): Don't attempt to set fun->start back to the
function origin, just go back one section.

ChangeLog:

* regformats/reg-ppc.dat: Rename "ps" to "msr".
* regformats/reg-ppc64.dat: Likewise.

gdbserver/ChangeLog:

* configure.srv [powerpc64-*-linux*]: Add all files mentioned for
powerpc-*-linux* to srv_regobj and reg_xmlfiles.
* linux-ppc-low.c (ppc_get_pc): Support bi-arch operation.
(ppc_set_pc): Likewise.
(ppc_arch_setup): New function.
(ppc_fill_gregset): Call ppc_collect_ptrace_register instead
of collect_register.
(the_low_target): Use ppc_arch_setup as arch_setup initializer.

* configure.srv [powerpc64-*-linux*]: Use linux-ppc-low.o
instead of linux-ppc64-low.o.
* linux-ppc64-low.c: Remove file.
* Makefile.in (SFILES): Remove linux-ppc64-low.c.
(linux-ppc64-low.o): Remove rule.

* linux-ppc-low.c (init_registers_ppc64): Add prototype.
(init_registers_powerpc_64): Likewise.
(ppc_regmap): Conditionally define depending on __powerpc64__.
(ppc_cannot_store_register): Do not special-case "fpscr" when
compiled on __powerpc64__.
(ppc_collect_ptrace_register): New function.
(ppc_supply_ptrace_register): New function.
(ppc_breakpoint): Change type to "unsigned int".
(ppc_breakpoint_at): Change type of "insn" to "unsigned int".
(the_low_target): Conditionally provide initializers for the
arch_setup member depending on __powerpc64__.  Install
collect_ptrace_register and supply_ptrace_register members.

ChangeLog:

* features/Makefile (%.dat): Emit xmltarget statement.

* regformats/regdat.sh: Support xmltarget and xmlarch statments.
Generate code to set gdbserver_xmltarget in init_registers_${name}.

* regformats/arm-with-iwmmxt.dat: Regenerate.
* regformats/mips64-linux.dat: Regenerate.
* regformats/mips-linux.dat: Regenerate.
* regformats/rs6000/powerpc-32.dat: Regenerate.
* regformats/rs6000/powerpc-64.dat: Regenerate.
* regformats/rs6000/powerpc-e500.dat: Regenerate.

* regformats/reg-arm.dat: Add xmlarch statement.
* regformats/reg-i386.dat: Likewise.
* regformats/reg-i386-linux.dat: Likewise.
* regformats/reg-x86-64-linux.dat: Likewise.
* regformats/reg-spu.dat: Likewise.

gdbserver/ChangeLog:

* regcache.h (gdbserver_xmltarget): Add extern declaration.
* server.c (gdbserver_xmltarget): Define.
(get_features_xml): Use it to replace "target.xml" and arch_string.

* configure.srv: Remove srv_xmltarget.  Add XML files that were
mentioned there to srv_xmlfiles instead.  Remove conditional tests
on gdb_cv_arm_iwmmxt, gdb_cv_ppc_altivec, gdb_cv_ppc_spe; set
srv_xmlfiles and srv_regobj to include all possible choices.
* configure.ac (srv_xmltarget): Remove.
(srv_xmlfiles): Do not add "target.xml".
(gdb_cv_arm_iwmmxt, gdb_cv_ppc_altivec, gdb_cv_ppc_spe): Remove
checks for supplementary target information.
* configure: Regenerate.
* Makefile.in (XML_TARGET): Remove.
(target.xml): Remove rule.
(clean): Do not clean up target.xml.
(.PRECIOUS): Do not mention target.xml.

* target.h (struct target_ops): Remove arch_string member.
* linux-low.c (linux_arch_string): Remove.
(linux_target_ops): Remove arch_string initializer.
* linux-low.h (struct linux_target_ops): Remove arch_string member.
* linux-i386-low.c (the_low_target): Remove arch_string initializer.
* linux-x86-64-low.c (the_low_target): Remove arch_string initializer.
* spu-low.c (spu_arch_string): Remove.
(spu_target_ops): Remove arch_string initializer.
* win32-low.c (win32_arch_string): Remove.
(win32_target_ops): Remove arch_string initializer.
* win32-low.h (struct win32_target_ops): Remove arch_string member.
* win32-arm-low.c (the_low_target): Remove arch_string initializer.
* win32-i368-low.c (the_low_target): Remove arch_string initializer.

Don't check assertions until symbols are finalized.  Create an output
section if the script uses a data statement with no input sections.
Don't create a loadable segment for the headers if there is no room.

Put input sections with no flags in output sections with the same name.

From Craig Silverstein: Have Parameters point to General_options.

*** empty log message ***

* gdb.base/sigstep.exp (breakpoint_to_handler): Remove setup_kfail
for bug 1738.
(breakpoint_to_handler_entry): Ditto.

daily update

Implement -q/--emit-relocs.

* remote.c (remote_wait, remote_async_wait): Stop if we receive
an error.

Add changelog entries for last commit.

* utils.c (debug_timestamp): New.
(vfprintf_unfiltered): Print timestamps if requested.
(show_debug_timestamp): New.
(initialize_utils): Register "set debug timestamp".
* NEWS: Mention "set debug timestamp".  Add GDB 6.8 section.

* gdb.texinfo (Debugging Output): Document "set debug timestamp".

    * gdb.base/ending-run.exp: Use the first line of code inside
        function body to test breakpoints.
        * gdb.mi/mi-break.exp, gdb.mi/mi2-break.exp: Adjust the actual
        location where the breakpoint is inserted when using the line
        where a function is declared. Fix typo in the description of
        one of the tests.
        * gdb.mi/mi-simplerun.exp, gdb.mi/mi2-simplerun.exp: Likewise.

    * breakpoint.c (skip_prologue_sal): New function.
        (resolve_sal_pc): Adjust SAL past prologue if the SAL was
        computed from a line number.

    * features/rs6000/power-core.xml, features/rs6000/power64-core.xml
        features/rs6000/powerpc-601.xml, features/rs6000/rs6000.xml:
        Set PC register type to "code_ptr".
        * features/rs6000/powerpc-32.c, features/rs6000/powerpc-403.c,
        features/rs6000/powerpc-403gc.c, features/rs6000/powerpc-505.c,
        features/rs6000/powerpc-601.c, features/rs6000/powerpc-602.c,
        features/rs6000/powerpc-603.c, features/rs6000/powerpc-604.c,
        features/rs6000/powerpc-64.c, features/rs6000/powerpc-7400.c,
        features/rs6000/powerpc-750.c, features/rs6000/powerpc-860.c,
        features/rs6000/powerpc-e500.c, features/rs6000/rs6000.c:
        Regenerate.

    * ld-cris/libdso-10.d: Update expected output for the Dynamic
        Section to allow an arbitrary number of spaces.

    * elf.c ( _bfd_elf_print_private_bfd_data): Call
        elf_backend_get_target_dtag if defined.
        * elf32-mips.c (elf_backend_get_target_dtag): Define.
        * elf64-mips.c: Likewise.
        * elfn32-mips.c: Likewise.
        * elfxx-mips.c (_bfd_mips_elf_get_target_dtag): New.
        * elfxx-mips.h (_bfd_mips_elf_get_target_dtag): Declare.
        * elf-bfd.h (elf_backend_get_target_dtag): Add prototype.
        * elfxx-target.h (elf_backend_get_target_dtag): Add default.
        (elf_backend_data): Add elf_backend_get_target_dtag.

2008-02-27  Pierre Muller  <[email protected]>

* gdb.arch/i386-sse.exp: avoid same output for two breakpoint setting
tests.

2008-02-27  Pierre Muller  <[email protected]>

* gdb.base/args.exp: avoid same output for tests
with single quotes.

Fix handling of ENTRY in linker script.

   PR 3134
   * h8300.h (h8_opcodes): Add an encoding for a mov.l instruction
   with a 32-bit displacement but without the top bit of the 4th byte
   set.

   * gas/h8300/pr3134.s: New test.
   * gas/h8300/pr3134.d: Expected disassembly
   * gas/h8300/h8300.exp: Run the new test.

   * gas/h8300/h8300-coff.exp: Fix test for COFF based ports to
   accept h8300-rtemscoff not just h8300-rtems.

oops - omitted from previous delta

    * ar.c (usage): Mention -t command line switch.
        * doc/binutils.texi (ranlib): Document -t command line switch.

* linux-low.h (struct linux_target_ops): Replace left_pad_xfer field
by collect_ptrace_register and supply_ptrace_register hooks.
* linux-low.c (fetch_register): Use supply_ptrace_register callback
instead of checking for the_low_target.left_pad_xfer.
(usr_store_inferior_registers): Use collect_ptrace_register callback
instead of checking for the_low_target.left_pad_xfer.

* linux-s390-low.c (s390_collect_ptrace_register): New function.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Call s390_collect_ptrace_register.
(the_low_target): Update.

* linux-ppc64-low.c (ppc_collect_ptrace_register): New function.
(ppc_supply_ptrace_register): Likewise.
(the_low_target): Update.

* linux-i386-low.c (the_low_target): Update.
* linux-x86-64-low.c (the_low_target): Update.

* configure.srv [s390x-*-linux*]: Set srv_regobj to include both
reg-s390.o and reg-s390x.o.

* linux-low.c (new_inferior): New global variable.
(linux_create_inferior, linux_attach): Set it.
(linux_wait_for_process): Call the_low_target.arch_setup after the
target has stopped for the first time.
(initialize_low): Do not call the_low_target.arch_setup.

* linux-s390-low.c (s390_get_pc): Support bi-arch operation.
(s390_set_pc): Likewise.
(s390_arch_setup): New function.
(the_low_target): Use s390_arch_setup as arch_setup routine.

* regcache.c (realloc_register_cache): New function.
(set_register_cache): Call it for each existing regcache.

gdb/ChangeLog:

* regformats/regdat.sh: Rename init_registers function in
generated file to init_registers_${name}.

* regformats/reg-crisv32.dat: Set "name" to crisv32.
* regformats/reg-ppc64.dat: Set "name" to ppc64.
* regformats/reg-s390x.dat: Set "name" to s390x.

gdbserver/ChangeLog:

* server.h (init_registers): Remove prototype.

* linux-low.h (struct linux_target_ops): Add arch_setup field.
* linux-low.c (initialize_low): Call the_low_target.arch_setup ()
instead of init_registers ().
* linux-arm-low.c (init_registers_arm): Add prototype.
(init_registers_arm_with_iwmmxt): Likewise.
(the_low_target): Add initializer for arch_setup field.
* linux-cris-low.c (init_registers_cris): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-crisv32-low.c (init_registers_crisv32): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-i386-low.c (init_registers_i386_linux): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-ia64-low.c (init_registers_ia64): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-m32r-low.c (init_registers_m32r): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-m68k-low.c (init_registers_m68k): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-mips-low.c (init_registers_mips_linux): Add prototype.
(init_registers_mips64_linux): Likewise.
(the_low_target): Add initializer for arch_setup field.
* linux-ppc-low.c (init_registers_ppc): Add prototype.
(init_registers_powerpc_32, init_registers_powerpc_e500): Likewise.
(the_low_target): Add initializer for arch_setup field.
* linux-ppc64-low.c (init_registers_ppc64): Add prototype.
(init_registers_powerpc_64): Likewise.
(the_low_target): Add initializer for arch_setup field.
* linux-s390-low.c (init_registers_s390): Add prototype.
(init_registers_s390x): Likewise.
(the_low_target): Add initializer for arch_setup field.
* linux-sh-low.c (init_registers_sh): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-x86-64-low.c (init_registers_x86_64_linux): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-xtensa-low.c (init_registers_xtensa): Add prototype.
(the_low_target): Add initializer for arch_setup field.

* win32-low.h (struct win32_target_ops): Add arch_setup field.
* win32-low.c (initialize_low): Call the_low_target.arch_setup ()
instead of init_registers ().
* win32-arm-low.c (init_registers_arm): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* win32-i386-low.c (init_registers_i386): Add prototype.
(the_low_target): Add initializer for arch_setup field.

* spu-low.c (init_registers_spu): Add prototype.
(initialize_low): Call initialie_registers_spu () instead of
initialize_registers ().

2008-02-26  Greg Law  <[email protected]>

* regcache.c (registers_changed): Call reinit_frame_cache.

* configure.tgt (sh-*-linux*): Match sh*.  Add glibc-tdep.o.
* sh-linux-tdep.c (sh_linux_init_abi): Use glibc_skip_solib_resolver
and svr4_fetch_objfile_link_map.
* Makefile.in (sh-linux-tdep.o): Update.

*** empty log message ***

daily update

From Craig Silverstein: rework handling of Script_options.

* amd64-tdep.c (amd64_classify): Add support for decimal float
types.
* i386-tdep.c (i386_return_value): Make 128-bit decimal float
use the struct return convention.

From Craig Silverstein: implement -z max-page-size and -z
common-page-size.

From Craig Silverstein: rename option functions for future option
handling rewrite.

2008-02-26  H.J. Lu  <[email protected]>

* gas/i386/jump.d: Updated for COFF.

* config/default.exp (gcc_gas_flag, dlltool_gas_flag): Define to
empty for testing an installed toolchain.

* objdump.c (objdump_print_addr): If displaying file offsets, show
  the offset even if there are no symbols available.
  (dump_section): Display nothing if none of the section is going to
  be dumped.  Display the file offset, if requested, of the location
  from where the dump starts.
  * doc/binutils.texi (objdump): Mention that dumping via the -s
  switch is also affected by the -F option.

* elf32-ppc.c (ppc_elf_check_relocs): Set pointer_equality_needed
for R_PPC_REL32 syms.  Don't set non_got_ref on branch reloc syms,
and assume branch relocs are not dynamic when non-shared.
(readonly_dynrelocs): New function, split out from..
(maybe_set_textrel): ..here, renamed from old readonly_dynrelocs.
(ppc_elf_adjust_dynamic_symbol): For symbols generating plt entries,
clear non_got_ref..
(allocate_dynrelocs): ..and don't set u.def for undefined weak.
Do allow dynamic relocs on undefined symbols.
(ppc_elf_adjust_dynamic_symbol): Use readonly_dynrelocs.
(ppc_elf_relocate_section): Mirror dynamic reloc changes in
check_relocs.
(ppc_elf_finish_dynamic_symbol): Don't give a warning on weak
plt symbols needing pointer_equality_needed.

Re-apply this patch which was accidentally deleted:
         2006-05-16  Carlos O'Donell  <[email protected]>

         * doc/binutils.texi: Use "Binutils Index" for index name.

* breakpoint.c (print_one_breakpoint_location): Revert Enb field
to old format.  Discard breakpoint address if shared library is
unloaded.
(breakpoint_1): Adjust formatting of table header accordingly.

*** empty log message ***

daily update

(Set Breaks): Revert description of Enb column of
breakpoint table.

*** empty log message ***

   * remote.c (remote_get_threadlist): If the response
       is empty, don't try to parse it.

*** empty log message ***

daily update

*** empty log message ***

daily update

Unbreak 'target async'.
        * serial.c (serial_async): Set the
        handler function before enabling async
        mode.

gas/testsuite/

2008-02-23  H.J. Lu  <[email protected]>

* gas/i386/jump.s: Add tests for far branches.
* gas/i386/jump16.s: Likewise.

* gas/i386/jump.d: Updated.
* gas/i386/jump16.d: Likewise.
* gas/i386/x86-64-inval.l: Likewise.

* gas/i386/x86-64-inval.s: Add tests for 16-bit near indirect
branches.

opcodes/

2008-02-23  H.J. Lu  <[email protected]>

* i386-opc.tbl: Disallow 16-bit near indirect branches for
x86-64.
* i386-tbl.h: Regenerated.

* elf32-ppc.c (ppc_elf_check_relocs): Revert non_got_ref change.

* elf32-ppc.c (ppc_elf_copy_indirect_symbol): Copy
pointer_equality_needed.
(ppc_elf_check_relocs): Split out non-branch relocs from others
that might emit dynamic relocs.  Set pointer_equality_needed
for their symbols.  Don't set non_got_ref on branch reloc symbols.
(ppc_elf_hash_symbol): New function.
(elf_backend_hash_symbol): Define.
(ppc_elf_finish_dynamic_symbol): Handle pointer_equality_needed.
Error if pointer_equality_needed on weak plt symbol.

2008-02-22  H.J. Lu  <[email protected]>

PR ld/5788
* elflink.c (elf_create_symbuf): Correct buffer size and
position.

*** empty log message ***

ld/testsuite/
* ld-elf/seg.d: Expect .reginfo section on MIPS.

daily update

* solib-svr4.c (enable_break): Convert r_brk to a code address.

    * config/tc-arm.c (do_bx): Only test EF_ARM_EABI_VERSION on ELF
        targeted ARM ports, otherwise just skip generating the reloc.

* gas/m68hc11/bug-1825.d: Update to match changes in the
  information generated with source-in-disassembly listings.
  * gas/m68hc11/indexed12.d: Likewise.
  * gas/m68hc11/insns-dwarf2.d: Likewise.
  * gas/m68hc11/lbranch-dwarf2.d: Likewise.

    PR 868
        *dwarf2.c: Revert previous patch.  All of the allocate memory is
        on an obstack which will be freed at some other time.

    * config/tc-arm.c (do_bx): Only test EF_ARM_EABI_VERSION on ELF
        targeted ARM ports.

    PR ld/5785
        * ldlang.c (lang_size_sections_1): Honour the setting of an
        lma_region even if there is no vma region set, or the vma region
        is the same as the lma region.

* objdump.c (display_file_offsets): New variable.
  (long_options): Add -F/--file-offsets.
  (objdump_print_addr_with_sym): If displaying file offsets, print
  the offset of the given address.
  (disassemble_bytes): If displaying file offsets, tell the user how
  many zeroes are skipped and the file offset of the point where
  dumping resumes.
  (disassemble_section): Only display the name of the section if
  data is going to be dumped from it.
  (main): Handle new option.  Produce error messages if the start or
  stop addresses do not make sense.
  * doc/binutils.texi: Document the new feature.
  * NEWS: Mention the new feature.

*** empty log message ***

daily update

* remote.c (extended_remote_attach_1): Set attach_flag.
(extended_remote_create_inferior_1): Clear attach_flag.

opcodes/
2008-02-21  Jan Beulich  <[email protected]>

* i386-opc.tbl: Allow Dword for far indirect call. Allow Dword
and Fword for far indirect jmp. Allow Reg16 and Word for near
indirect jmp on x86-64. Disallow Fword for lcall.
* i386-tbl.h: Re-generate.

* mipsnbsd-tdep.c (mipsnbsd_ilp32_fetch_link_map_offsets): Set
r_brk_offset.
(mipsnbsd_lp64_fetch_link_map_offsets): Likewise.
* solib-svr4.c (solib_svr4_r_brk): New.
(open_symbol_file_object, svr4_current_sos): Always check the
debug base.
(svr4_fetch_objfile_link_map): Do not set debug_base.
(enable_break): Use r_brk if it is set.
(svr4_ilp32_fetch_link_map_offsets): Set r_brk_offset.
(svr4_lp64_fetch_link_map_offsets): Likewise.
* solib-svr4.h (struct link_map_offsets): Add r_brk_offset.

*** empty log message ***

Correct year.

daily update

    * ld-auto-import/auto-import.exp: Use $ld to link the dll for
        cygwin, not $CC.

PR 868
   * libbfd.c (bfd_realloc_or_free): New function.  Performs like
   bfd_realloc, but if the (re)allocation fails, the pointer is
   freed.
   * libbfd-in.h: Prototype.
   * libbfd.h: Regenerate.
   * bfdio.c (bfd_bwrite): Use the new function.
   (bfd_seek): Likewise.
   * bfdwin.c:(bfd_get_file_window): Likewise.
   * elf-strtab.c (_bfd_elf_strtab_add): Likewise.
   * elf32-ppc.c (ppc_elf_relax_section): Likewise.
   * elf32-xtensa.c (vsprintf_msg): Likewise.
   * mach-o.c (bfd_mach_o_core_fetch_environment): Likewise.
   * stabs.c (_bfd_link_seciton_stabs): Likewise.
   * vms-misc.c (_bfd_vms_get_record): Likewise.
   * vms-tir.c (check_section): Likewise.
   * vms.c (vms_new_section_hook): Likewise.
   * elf32-arm.c (elf32_arm_section_map_add): Check that the
   allocation of sec_data->map succeeded before using it.
   * elflink.c (elf_link_output_sym): Do not overwrite finfo->
   symshndxbuf until it is known that the reallocation succeeded.

config:
2008-02-20  Uros Bizjak  <[email protected]>

* mh-ppc-darwin (BOOT_CFLAGS): Use +=, not =.

PR 868
   * dwarf2.c (read_abbrevs): Free the abbreviation table if we run
   out of memory.
   (decode_line_info): Free the line_info_table before returning a
   failure result.
   (_bfd_dwarf2_cleanup_debug_info): Free the abbreviation table.
   Free the line table.  Free the function table.  Free the variable
   table.

2008-02-20  Markus Deuling  <[email protected]>
    Mark Kettenis  <[email protected]>

* alpha-tdep.c (alpha_heuristic_unwind_cache): Replace saved_regs by
trad_frame_saved_reg.
(trad-frame.h): New include.

(alpha_heuristic_frame_unwind_cache): Use trad_frame_alloc_saved_regs
instead of frame_obstack_zalloc.
(alpha_heuristic_frame_prev_register): Use trad_frame_get_prev_register.

* Makefile.in (alpha-tdep.o): Add dependency to trad_frame_h.

2008-02-20  Paul Brook  <[email protected]>

ld/
* emultempl/armelf.em (OPTION_FIX_V4BX_INTERWORKING): Define.
(PARSE_AND_LIST_LONGOPTS): Add fix-v4bx-interworking.
(PARSE_AND_LIST_OPTIONS): Ditto.
(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_FIX_V4BX_INTERWORKING.
* emulparams/armelf.sh (OTHER_TEXT_SECTIONS): Add .v4_bx.
* emulparams/armelf_linux.sh (OTHER_TEXT_SECTIONS): Ditto.
* emulparams/armnto.sh (OTHER_TEXT_SECTIONS): Ditto.
* ld.texinfo: Document --fix-v4bx-interworking.

ld/testsuite/
* ld-arm/armv4-bx.d: New test.
* ld-arm/armv4-bx.s: New test.
* ld-arm/arm.ld: Add .v4bx.
* ld-arm/arm-elf.exp: Add armv4-bx.

gas/testsuite/
* gas/arm/thumb.d: Exclude EABI targets.
* gas/arm/arch4t.d: Exclude EABI targts.
* gas/arm/v4bx.d: New test.
* gas/arm/v4bx.s: New test.
* gas/arm/thumb-eabi.d: New test.
* gas/arm/arch4t-eabi.d: New test.

gas/
* config/tc-arm.c (fix_v4bx): New variable.
(do_bx): Generate V4BX relocations.
(md_assemble): Allow bx on v4 codes when fix_v4bx.
(md_apply_fix): Handle BFD_RELOC_ARM_V4BX.
(tc_gen_reloc): Ditto.
(OPTION_FIX_V4BX): Define.
(md_longopts): Add fix-v4bx.
(md_parse_option): Handle OPTION_FIX_V4BX.
(md_show_usage): Document --fix-v4bx.
* doc/c-arm.texi: Document --fix-v4bx.

bfd/
* reloc.c: Add BFD_RELOC_ARM_V4BX.
* elf32-arm.c (elf32_arm_reloc_map): Add BFD_RELOC_ARM_V4BX.
(ARM_BX_GLUE_SECTION_NAME, ARM_BX_GLUE_SECTION_NAME): Define.
(elf32_arm_link_hash_table): Add bx_glue_size and bx_glue_offset.
Update comment for fix_v4bx.
(elf32_arm_link_hash_table_create): Zero bx_glue_size and
bx_glue_offset.
(ARM_BX_VENEER_SIZE, armbx1_tst_insn, armbx2_moveq_insn,
armbx3_bx_insn): New.
(bfd_elf32_arm_allocate_interworking_sections): Allocate BX veneer
section.
(bfd_elf32_arm_add_glue_sections_to_bfd): Ditto.
(bfd_elf32_arm_process_before_allocation): Record BX veneers.
(record_arm_bx_glue, elf32_arm_bx_glue): New functions.
(elf32_arm_final_link_relocate): Handle BX veneers.
(elf32_arm_output_arch_local_syms): Output mapping symbol for .v4_bx.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.

* rs6000-tdep.c (gdb_print_insn_powerpc): Get the current endianess
from disassemble_info instead of gdbarch_byte_order.

* mips-tdep.c (gdb_print_insn_mips): Likewise.
* arm-tdep.c (gdb_print_insn_arm): Likewise.

* gdbarch.sh (memory_insert_breakpoint, memory_remove_breakpoint): Add
gdbarch as parameter.

* gdbarch.{c,h}: Regenerate.

* ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Add gdbarch as
parameter.
* mem-break.c (default_memory_insert_breakpoint)
(default_memory_remove_breakpoint): Likewise.
* target.h (default_memory_remove_breakpoint)
(default_memory_insert_breakpoint): Likewise.

* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add gdbarch as
parameter. Replace current_gdbarch by gdbarch.
* m32r-tdep.c (m32r_memory_insert_breakpoint)
(m32r_memory_remove_breakpoint): Likewise.

2008-02-20  Paolo Bonzini  <[email protected]>

        PR bootstrap/32009
        PR bootstrap/32161

        * configure.ac (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Compute here.
        * configure: Regenerate.

        * Makefile.def: Define stage_libcflags for all bootstrap stages.
        * Makefile.tpl (BOOT_LIBCFLAGS, STAGE2_LIBCFLAGS, STAGE3_LIBCFLAGS,
        STAGE4_LIBCFLAGS): New.
        (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Subst from autoconf, without
        $(SYSROOT_CFLAGS_FOR_TARGET) and $(DEBUG_PREFIX_CFLAGS_FOR_TARGET).
        (BASE_TARGET_EXPORTS): Append them here to C{,XX}FLAGS.
        (EXTRA_TARGET_FLAGS): Append them here to {LIB,}C{,XX}FLAGS.
        (configure-stage[+id+]-[+prefix+][+module+]): Pass stage_libcflags
        for target modules.  Don't export LIBCFLAGS.
        (all-stage[+id+]-[+prefix+][+module+]): Pass stage_libcflags; pass
        $(BASE_FLAGS_TO_PASS) where [+args+] was passed, and [+args+] after
        the overridden CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET.
        (invocations of `all'): Replace $(TARGET_FLAGS_TO_PASS) with
        $(EXTRA_TARGET_FLAGS), $(FLAGS_TO_PASS) with $(EXTRA_HOST_FLAGS).
        * Makefile.in: Regenerate.

config:
2008-02-20  Paolo Bonzini  <[email protected]>

        PR bootstrap/32009
        * mh-ppc-darwin (BOOT_CFLAGS): Reenable.

*** empty log message ***

daily update

doc/
* gdb.texinfo (vAttach, vRun): Remove requirement of the stub
killing the inferior when it is already debugging a process.

gdbserver/
* server.c (handle_v_requests): When handling the vRun and vAttach
packets, if already debugging a process, don't kill it.  Return an
error instead.

* MAINTAINERS: Add Vladimir Prus as MI maintainer.

    * NEWS: Add entry describing Add support improvements.

PR other/12618
* testsuite/Makefile.in (mostlyclean): Remove any core file.

*** empty log message ***

daily update

2008-02-18  H.J. Lu  <[email protected]>

* cfi/cfi.exp (gas_x86_64_check): New.
(gas_x86_32_check): Likewise.
Run 32bit and 64bit tests for x86 targets if they are supportd.

* m68klinux-nat.c (getfpregs_supplies): Replace gdbarch_fp0_regnum by
M68K_FP0_REGNUM.

2008-02-18  H.J. Lu  <[email protected]>

* doc/c-i386.texi: Update -march= and .arch.

* sentinel-frame.c (sentinel_frame_prev_register): Do not call
register_offset_hack anymore.

* regcache.{c,h} (register_offset_hack): Remove.

* hppa-tdep.h (find_global_pointer): Add gdbarch as parameter.

* hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer): Likewise. Replace
current_gdbarch by gdbarch.
(hppa64_hpux_find_global_pointer): Likewise.
* hppa-tdep.c (hppa_find_global_pointer): Likewise.
(hppa32_push_dummy_call, hppa64_push_dummy_call): Update call for
find_global_pointer.

* hppabsd-tdep.c (hppabsd_find_global_pointer): Add gdbarch as
parameter.
* hppa-linux-tdep.c (hppa_linux_find_global_pointer): Likewise.

* hppa-linux-nat.c (hppa_linux_register_addr): Use ARRAY_SIZE instead
of gdbarch_num_regs.

* hppa-hpux-tdep.c (hppa_hpux_sr_for_addr): Add gdbarch as parameter and
replace current_gdbarch by gdbarch.
(hppa_hpux_push_dummy_code): Update call for hppa_hpux_sr_for_addr.

    * scripttempl/armbpabi.sc (ENTRY): Do not define when performing a
        relocatable link.
        * scripttempl/elf32cr16.sc: Likewise.
        * scripttempl/elf32cr16c.sc: Likewise.
        * scripttempl/elf32crx.sc: Likewise.
        * scripttempl/elf32sh-symbian.sc: Likewise.
        * scripttempl/elf_chaos.sc: Likewise.
        * scripttempl/elfd10v.sc: Likewise.
        * scripttempl/elfi370.sc: Likewise.
        * scripttempl/elfm68hc11.sc: Likewise.
        * scripttempl/elfm68hc12.sc: Likewise.
        * scripttempl/ip2k.sc: Likewise.
        * scripttempl/iq2000.sc: Likewise.
        * scripttempl/mep.sc: Likewise.
        * scripttempl/v850.sc: Likewise.
        * scripttempl/xstormy16.sc: Likewise.