* dbxread.c (stabs_data): New static variable.
(fill_symbuf): Support an in-memory buffer for stabs data.
(stabs_seek): New function.
(dbx_psymtab_to_symtab): Relocate the stabs data if necessary.
(read_ofile_symtab): Use stabs_seek.
(elfstab_build_psymtabs): Take an asection* instead of
an offset and size. Relocate the stabs data if necessary.
Save the section* for dbx_psymtab_to_symtab.
* dwarf2read.c: Add section variables for each debug section.
(dwarf2_locate_sections): Fill them in.
(dwarf2_read_section): Take an asection* argument.
Relocate the section contents if necessary.
(dwarf2_build_psymtabs, dwarf2_build_psymtabs_easy): Update callers.
* dwarf2cfi.c (parse_frame_info): Take a section argument and pass
it to dwarf2_read_section.
(dwarf2_build_frame_info): Update callers.
* elfread.c (elf_symfile_read): Update call to
elfstab_build_psymtabs.
* gdb-stabs.h (struct dbx_symfile_info): Add stab_section.
(DBX_STAB_SECTION): New macro.
* stabsread.h (elfstab_build_psymtabs): Update prototype.
* symfile.c (symfile_dummy_outputs): New function.
(symfile_relocate_debug_section): New function.
* symfile.h (symfile_relocate_debug_section): Add prototype.
* lib/gdb.exp: Revert patch of 2003-01-06, which set LC_ALL.
This was a workaround for a UTF-8 bug in readline 4.3. The bug
has been fixed in gdb/readline on 2003-01-09.
Jim Blandy [Thu, 30 Jan 2003 21:45:07 +0000 (21:45 +0000)]
* symfile.c (find_separate_debug_file): Assert that the objfile's
directory name we compute ends with a slash, and then assume that
that's so everywhere we use it.
* d10v-tdep.c: Include "frame-unwind.h".
(d10v_gdbarch_init): Append d10v_frame_p to the unwind predicate
list.
(next_addr, uses_frame): Delete.
(struct d10v_unwind_cache): Define.
(prologue_find_regs): Add struct d10v_unwind_cache info parameter.
Use info instead of next_addr and uses_frame globals.
(d10v_frame_init_saved_regs): Delete function.
(d10v_init_extra_frame_info): Delete function.
(d10v_gdbarch_init): Do not initialize init_extra_frame_info,
frame_init_saved_regs or pop_frame, frame_chain, frame_chain_valid,
init_frame_pc or frame_saved_pc.
(d10v_pop_frame): Delete function.
(do_d10v_pop_frame): Delete function.
(d10v_frame_chain): Delete function.
(d10v_frame_chain_valid): Delete function.
(d10v_frame_pc_unwind): New function.
(d10v_frame_id_unwind): New function.
(saved_regs_unwinder): New function.
(d10v_frame_register_unwind): New function.
(d10v_frame_pop): New function.
(d10v_frame_unwind): New variable.
(d10v_frame_p): New function.
(d10v_frame_saved_pc): Delete function.
* Makefile.in (d10v-tdep.o): Update dependencies.
* frame.c (frame_saved_regs_id_unwind): Assert FRAME_CHAIN_P.
(legacy_get_prev_frame): Assert FRAME_CHAIN_P.
(get_prev_frame): When FRAME_CHAIN_P, call legacy_get_prev_frame.
(frame_saved_regs_pc_unwind): Assert FRAME_SAVED_PC_P.
* gdbarch.sh (FRAME_CHAIN): Change to a function with predicate.
(FRAME_SAVED_PC): Change to a function with predicate.
* gdbarch.h, gdbarch.c: Re-generate.
Alexandre Oliva [Tue, 28 Jan 2003 00:01:27 +0000 (00:01 +0000)]
* elfxx-mips.c (mips_elf_multi_got): New function.
(struct mips_got_entry): Make symndx and gotidx signed. Moved
addend into union along with address and link hash entry.
(struct mips_got_info): Added bfd2got and next.
(struct mips_elf_hash_sort_data): Added max_unref_got_dynindx.
(mips_elf_got_section, mips_elf_create_got_section): Use
SEC_EXCLUDE bit to tell whether we really need the got
section. Take boolean arguments to disregard an excluded
section, or to create it as excluded. Adjust all callers.
Use mips_elf_got_section all over.
(mips_elf_local_got_index, mips_elf_got_page,
mips_elf_got16_entry): Take input bfd as argument, and pass it
on to mips_elf_create_local_got_entry.
(mips_elf_global_got_index, mips_elf_create_local_got_entry):
Take input bfd as argument, and manage entries in the
appropriate GOT.
(mips_elf_got_offset_from_index): Take input bfd as argument,
and use it to adjust the GP offset of the bfd.
(mips_elf_sort_hash_table, mips_elf_sort_hash_table_f): Move
unreferenced GOT entries of global symbols to the end.
(mips_elf_record_global_got_symbol): Take input bfd as
argument. Add entries to the master GOT hash table.
(struct mips_elf_bfd2got_hash): New.
(struct mips_elf_got_per_bfd_arg): New.
(struct mips_elf_set_global_got_offset_arg): New.
(mips_elf_hash_bfd_vma, mips_elf_multi_got_entry_hash,
mips_elf_multi_got_entry_eq, mips_elf_bfd2got_entry_hash,
mips_elf_bfd2got_entry_eq, mips_elf_make_got_per_bfd,
mips_elf_merge_gots, mips_elf_set_global_got_offset,
mips_elf_resolve_final_got_entry,
mips_elf_resolve_final_got_entries, mips_elf_adjust_gp,
mips_elf_got_for_ibfd): New functions.
(ELF_MIPS_GP_OFFSET): Don't depend on SGI_COMPAT.
(MIPS_ELF_GOT_MAX_SIZE): New macro.
(STUB_LW): Generate 64-bit stub regardless of SGI_COMPAT.
(mips_elf_got_entry_hash): Take new fields into account. Use
mips_elf_hash_bfd_vma.
(mips_elf_got_entry_eq): Take new fields into account.
(mips_elf_create_got_section): Initialize new fields.
(mips_elf_calculate_relocation): Pass input_bfd to functions
that now take it. Adjust gp for the input_bfd.
(mips_elf_allocate_dynamic_relocation,
mips_elf_create_dynamic_relocation,
_bfd_mips_elf_create_dynamic_sections): Use...
(mips_elf_rel_dyn_section): New function. Borrow code from...
(_bfd_mips_elf_check_relocs): Pass input_bfd to functions that
now take it. Create the got section if needed, even if
excluded, before recording a global got symbol. Move some
code to...
(mips_elf_record_local_got_symbol): New fn.
(_bfd_mips_elf_size_dynamic_sections): Disable combreloc.
Compute multi-got global entries offsets. Move GOT code to...
(_bfd_mips_elf_always_size_sections): Call mips_elf_multi_got
if the GOT is too big.
(_bfd_mips_elf_finish_dynamic_symbol): Set got entry of
undefweak symbol to zero. Generate dynamic relocations for
non-primary GOT entries for global symbols.
(_bfd_mips_elf_finish_dynamic_sections): Handle multi-got
case. Generate dynamic relocations for local got entries.
Sort dynamic relocations on N64 too, using...
(sort_dynamic_relocs_64): New fns.
(_bfd_mips_elf_hide_symbol): Adjust multi-got counters.
(_bfd_mips_elf_merge_private_bfd_data): Ignore EF_MIPS_XGOT.
Alexandre Oliva [Mon, 27 Jan 2003 22:45:58 +0000 (22:45 +0000)]
* configure.in (em): Set to irix on all Irix systems.
* configure: Rebuilt.
* config/te-irix.h: New file.
* config/tc-mips.c (mips_dwarf2_format): Use TE_IRIX to decide
whether to use Irix-specific 64-bit format.
* sentinel-frame.h, sentinel-frame.c: New files.
* Makefile.in (frame.o): Update dependencies.
(SFILES): Add sentinel-frame.c.
(sentinel_frame_h): Define.
(COMMON_OBS): Add sentinel-frame.o.
(sentinel-frame.o): Specify dependencies.
* frame.c: Include "sentinel-frame.h".
(frame_register_unwind): Rewrite assuming that there is always a a
->next frame.
(frame_register, generic_unwind_get_saved_register): Ditto.
(frame_read_unsigned_register, frame_read_signed_register): Ditto.
(create_sentinel_frame, unwind_to_current_frame): New functions.
(get_current_frame): Rewrite using create_sentinel_frame and
unwind_to_current_frame. When possible, always create a frame.
(create_new_frame): Set next to the sentinel frame.
(get_next_frame): Rewrite. Don't go below the level 0 frame.
(deprecated_update_frame_pc_hack): Update the next frame's PC and
ID cache when necessary.
(frame_saved_regs_id_unwind): Use frame_relative_level.
(deprecated_generic_get_saved_register): Use frame_relative_level,
get_frame_saved_regs, get_frame_pc, get_frame_base and
get_next_frame.
(frame_saved_regs_register_unwind): Use get_frame_saved_regs and
frame_register.
* configure.in: Check that -pg works if using --enable-profiling.
Check for monstartup and _mcleanup regardless of --enable-profiling.
* maint.c: Check for monstartup and _mcleanup before using them.
* config.in: Regenerated.
* configure: Regenerated.
* ld-s390/s390.exp: New file.
* ld-s390/tlsbin_64.dd: New file.
* ld-s390/tlsbin_64.rd: New file.
* ld-s390/tlsbin_64.s: New file.
* ld-s390/tlsbin_64.sd: New file.
* ld-s390/tlsbin_64.td: New file.
* ld-s390/tlsbin.dd: New file.
* ld-s390/tlsbinpic_64.s: New file.
* ld-s390/tlsbinpic.s: New file.
* ld-s390/tlsbin.rd: New file.
* ld-s390/tlsbin.s: New file.
* ld-s390/tlsbin.sd: New file.
* ld-s390/tlsbin.td: New file.
* ld-s390/tlslib_64.s: New file.
* ld-s390/tlslib.s: New file.
* ld-s390/tlspic1_64.s: New file.
* ld-s390/tlspic1.s: New file.
* ld-s390/tlspic2_64.s: New file.
* ld-s390/tlspic2.s: New file.
* ld-s390/tlspic_64.dd: New file.
* ld-s390/tlspic_64.rd: New file.
* ld-s390/tlspic_64.sd: New file.
* ld-s390/tlspic_64.td: New file.
* ld-s390/tlspic.dd: New file.
* ld-s390/tlspic.rd: New file.
* ld-s390/tlspic.sd: New file.
* ld-s390/tlspic.td: New file.
Jim Blandy [Thu, 23 Jan 2003 23:17:28 +0000 (23:17 +0000)]
* symfile.c (syms_from_objfile): Don't print the "(no debugging
symbols found)" message here; we haven't checked for a separate
debug info file yet, so we don't know yet.
(symbol_file_add_with_addrs_or_offsets): Print it here, after
we've looked everywhere. Also, there's no need to print a special
message when we're loading the separate debug info file: the one
symbol_file_add prints is fine.
Add support for executables whose debug info has been separated
out into a separate file, leaving only a link behind.
* objfiles.h (struct objfile): New fields: separate_debug_objfile
and separate_debug_objfile_backlink.
(put_objfile_before): New declaration.
* symfile.c: #include "filenames.h".
(symbol_file_add_with_addrs_or_offsets): If this objfile has its
debug info in a separate file, read that, too. Save the addrs
argument, so we can use it again to read the separated debug info;
syms_from_objfile modifies the table we pass it.
(reread_symbols): After re-reading an objfile, call
reread_separate_symbols to refresh its separate debug info
objfile, if it has one.
(reread_separate_symbols, find_separate_debug_file,
get_debug_link_info, separate_debug_file_exists): New functions.
(debug_file_directory): New global var.
(_initialize_symfile): Initialize debug_file_directory, and
provide the new `set debug-file-directory' command to let the user
change it.
* objfiles.c (free_objfile): If this objfile has its debug info in
a separate objfile, free that one too. If this is itself a
separate debug info objfile, clear our parent's backlink.
(put_objfile_before): New function.
* utils.c (gnu_debuglink_crc32): New function.
* defs.h (gnu_debuglink_crc32): New declaration.
* Makefile.in (symfile.o): Note dependency on "filenames.h".
* configure.in: Handle --with-separate-debug-dir config option.
* acinclude.m4 (AC_DEFINE_DIR): New macro.
* acconfig.h (DEBUGDIR): New macro.
* configure, aclocal.m4, config.in: Regenerated.
* gas/s390/reloc.s: Add test for PLT reloc against locally defined
but global function.
* gas/s390/reloc.d: Likewise.
* gas/s390/reloc64.s: Likewise.
* gas/s390/reloc64.d: Likewise.
Jim Blandy [Thu, 23 Jan 2003 08:06:36 +0000 (08:06 +0000)]
* symfile.c (symbol_file_add_with_addrs_or_offsets): New function,
like the old symbol_file_add, but taking new arguments: you can
now pass in either a `struct section_addr_info' list to say where
each section is loaded, or a `struct section_offsets' table. Pass
these new arguments through to syms_from_objfile as appropriate.
(symbol_file_add): Just call symbol_file_add_with_addrs_or_offsets,
with the appropriate quiescent values for the new arguments.
Jim Blandy [Thu, 23 Jan 2003 07:30:18 +0000 (07:30 +0000)]
* symfile.c: #include "gdb_assert.h".
(syms_from_objfile): Add the ability to pass in a section offset
table directly, as an alternative to the section_addr_info table.
Document arguments better.
(symbol_file_add): Pass extra arguments to syms_from_objfile.
* symfile.h (syms_from_objfile): Update declaration.
* rs6000-nat.c (objfile_symbol_add): Pass new arguments to
syms_from_objfile.
* Makefile.in (symfile.o): List dependency on $(gdb_assert_h).
Original patch by Tom Tromey <[email protected]> and
Jason Molenda <[email protected]>.
* Makefile.in (PROFILE_CFLAGS): Substitute from configure.
(INTERNAL_LDFLAGS): Don't include PROFILE_CFLAGS.
* NEWS: Mention profiling.
* configure.in (--enable-gdbtk): Fix typo.
(--enable-profiling): New. Set PROFILE_CFLAGS.
* maint.c (maintenance_set_profile_cmd): Remove NOTYET.
Fill in function.
(profiling_state): New variable.
(mcleanup_wrapper): New function.
(_initialize_maint): Remove NOTYET, fix call to
add_setshow_boolean_cmd for "maint set profile".
* configure: Regenerated.
* elf64-alpha.c (ALPHA_ELF_LINK_HASH_PLT_LOC): New.
(struct alpha_elf_link_hash_entry): Add plt_old_section, plt_old_value.
(elf64_alpha_adjust_dynamic_symbol): Set them.
(elf64_alpha_size_plt_section_1): Reset them when plt entry removed.
(elf64_alpha_relax_tls_get_addr): Handle LDM relocs. Frob the
symbol index when relaxing LDM to TPREL.
(elf64_alpha_relax_section): Likewise. Allow relaxation of GD
relocs, even if the target isn't locally defined.
(elf64_alpha_check_relocs): Frob LDM reloc symndx to zero.
(elf64_alpha_relocate_section): Likewise. Force TP-relative
relocs vs symndx 0 to the tp base.
projects / binutils.git / log