Alan Modra [Thu, 11 Jul 2002 01:06:58 +0000 (01:06 +0000)]
* config/tc-ppc.c (md_pseudo_table): Warning fix.
(ppc_cpu): Make it unsigned long to agree with struct powerpc_opcode
flags.
(ppc_size): Delete.
(ppc_xcoff64): Rename to ppc_obj64.
(md_parse_option <m>): Encode old ppc_size value in ppc_cpu.
(ppc_set_cpu): Set PPC_OPCODE_32 too.
(ppc_arch): Use ppc_obj64 instead of ppc_size to select bfd_mach_ppc64
or bfd_mach_ppc.
(ppc_target_format): Use ppc_obj64 to select format.
(md_begin): Adjust for PPC_OPCODE_32/64 in ppc_cpu.
(ppc_insert_operand): Use ppc_obj64 instead of ppc_size.
(ppc_elf_suffix): Likewise. Don't depend on BFD_DEFAULT_TARGET_SIZE.
(tc_frob_symbol): Likewise.
(md_assemble): Use ppc_obj64 instead of ppc_size. Don't depend on
BFD_DEFAULT_TARGET_SIZE.
(ppc_tc): Likewise.
(ppc_is_toc_sym): Likewise.
(md_apply_fix3): Likewise.
* config/tc-ppc.h (TC_FORCE_RELOCATION): Don't depend on
BFD_DEFAULT_TARGET_SIZE.
(ELF_TC_SPECIAL_SECTIONS): Likewise.
(tc_frob_symbol): Likewise.
Joel Brobecker [Thu, 11 Jul 2002 00:51:37 +0000 (00:51 +0000)]
* gdb.base/attach.exp: Add patterns to match output from /proc-based
systems.
Move comments in expect statements to inside the actions, so that they
don't get matched against.
Alan Modra [Wed, 10 Jul 2002 11:46:19 +0000 (11:46 +0000)]
* elf64-ppc.c (ONES): Define.
(ppc64_elf_howto_table): Use ONES here to avoid warnings. Fill in
missing src_mask fields. Tweak R_PPC64_NONE, R_PPC64_COPY. Fill
in missing dst_mask fields on R_PPC64_PLT32, R_PPC64_PLTREL32.
Alan Modra [Wed, 10 Jul 2002 04:59:42 +0000 (04:59 +0000)]
* elf.c: (assign_section_numbers) Set sh_entsize for .stab only
when not already set.
* elf64-sparc.c: (sparc64_elf_fake_sections): New function.
(elf_backend_fake_sections): Define.
* elf32-cris.c (cris_elf_relocate_section): Move sanity-check for
NULL sym_hashes to just before use.
<case R_CRIS_32_GOTREL>: In test for local symbol, accept also
symbol with non-default visibility.
<case R_CRIS_32_GOTREL, case R_CRIS_32_PLT_GOTREL>: Ditto.
<case R_CRIS_8_PCREL, case R_CRIS_16_PCREL, case R_CRIS_32_PCREL>:
Ditto.
(cris_elf_gc_sweep_hook): Only decrease h->plt.refcount for
symbol with non-default visibility.
(cris_elf_check_relocs): At tests for local symbol before
increasing h->plt.refcount, also check for non-default
visibility. Ditto when checking for local symbol to eliminate
pc-relative runtime relocs.
Alan Modra [Tue, 9 Jul 2002 02:41:16 +0000 (02:41 +0000)]
* configure.in: Add hppa-*-openbsd* target, change
alpha*-*-openbsd* format to elf, and use elf for sparc-*-openbsd*
with sparc64 cpu.
* configure: Regenerate.
Mark Kettenis [Mon, 8 Jul 2002 20:53:45 +0000 (20:53 +0000)]
* dwarf2cfi.c: Include "gcore.h".
(execute_stack_op): Fix implementation of the
DW_OP_deref and DW_OP_deref_size operators by letting do their
lookup in the target.
Alan Modra [Mon, 8 Jul 2002 08:13:37 +0000 (08:13 +0000)]
* elf.c: Formatting.
(IS_SOLARIS_PT_INTERP): Add p_paddr and p_memsz checks.
(INCLUDE_SECTION_IN_SEGMENT): Remove IS_SOLARIS_PT_INTERP.
(copy_private_bfd_data): Set p_vaddr on broken Solaris PT_INTERP
segments.
Mark Mitchell [Mon, 8 Jul 2002 05:34:08 +0000 (05:34 +0000)]
* cofflink.c (_bfd_coff_final_link): On PE COFF systems, take into
account the impact of relocation count overflow when computing
section offsets.
* coffcode.h (coff_write_relocs): Use obj_pe when deciding whether
or not to apply the PE COFF reloc overflow handling. Fix a
fencepost error in deciding whether or not to use that technique.
* config/mcore/tm-mcore.h: Remove file.
* config/mcore/mcore.mt: Remove definition of TM_FILE
* configure.tgt: Set gdb_multi_arch to yes for the mcore target.
* config/mcore/tm-mcore.h (GDB_MULTI_ARCH): Set to 2.
(PR_REGNUM, FIRST_ARGREG, LAST_ARGREG,RETVAL_REGNUM): Move to
mcore-tdep.
(REG_STRUCT_HAS_ADDR, USE_STRUCT_CONVENTION, GET_SAVED_REGISTER)
(TARGET_VIRTUAL_FRAME_POINTER, BELIEVE_PCC_PROMOTION): Remove.
* mcore-tdep.c (PR_REGNUM, FIRST_ARGREG, LAST_ARGREG)
(RETVAL_REGNUM): Move macros from tm-mcore.h
(mcore_reg_struct_has_addr): New function.
(mcore_gdbarch_init): Added initializations for the macros removed
from tm-mcore.h.
* symtab.c (remove_params): New function.
(make_symbol_overload_list): Use it instead of cplus_demangle.
(overload_list_add_symbol): Likewise. Reorder. Fix memory leak.
Mark Kettenis [Thu, 4 Jul 2002 15:13:28 +0000 (15:13 +0000)]
* i386bsd-tdep.c (i386nbsd_sigtramp_start, i386nbsd_sigtramp_end):
New variables.
(i386nbsd_init_abi): Use these to initialize tdep->sigtramp_start
and tdep->sigtramp_end.
* i386obsd-nat.c: New file.
* config/i386/obsd.mh (NATDEPFILES): Add i386obsd-nat.o.
Alan Modra [Thu, 4 Jul 2002 14:40:25 +0000 (14:40 +0000)]
* section.c (_bfd_strip_section_from_output): Remove unnecessary
link order code. Don't actually remove the output section here;
Just set a flag for the linker to do so.
* elflink.c (_bfd_elf_link_renumber_dynsyms): Test for removed
sections when setting up output section dynsyms.
* i386-nat.c (child_post_startup_inferior): New function
calling i386_cleanup_dregs if
I386_USE_GENERIC_WATCHPOINTS is defined.
* config/i386/nm-i386.h: define CHILD_POST_STARTUP_INFERIOR
conditional to acknowledge that i386-nat.c has its
own child_post_startup_inferior function.
Mark Kettenis [Thu, 4 Jul 2002 08:18:20 +0000 (08:18 +0000)]
* i386-tdep.h (I386_MAX_REGISTER_SIZE): New define.
* i386-tdep.c (i386_do_pop_frame): Use I386_MAX_REGISTER_SIZE
instead of MAX_REGISTER_RAW_SIZE.
(i386_extract_return_value, i386_extract_struct_value_address):
Convert to use regcache.
(i386_gdbarch_init): Set max_register_raw_size and
max_register_virtual_size to I386_MAX_REGISTER_SIZE.
Set extract_return_value and extract_struct_value_address instead
of their deprecated variants.
Mark Kettenis [Thu, 4 Jul 2002 07:22:11 +0000 (07:22 +0000)]
Convert i386 target to generic dummy frames.
* i386-tdep.c: Include "symfile.h".
(i386_frameless_signal_p): Consider a function to be frameless if
the pc points at the first instruction of the function.
(i386_frame_chain): Handle (generic) call dummies.
(i386_frame_saved_pc): Likewise.
(i386_frame_init_saved_regs): Remove code dealing with call
dummies on the stack.
(i386_push_dummy_frame): Removed.
(i386_call_dummy_words): Removed.
(i386_fix_call_dummy): Removed.
(i386_push_return_address): New function.
(i386_do_pop_frame): Renamed from i386_pop_frame. Add FRAME
parameter, and don't call get_current_frame.
(i386_pop_frame): New function.
(i386_gdbarch_init): Set use_generic_dummy_frames to 1, set
call_dummy_location to AT_ENTRY_POINT, set call_dummy_address to
entry_point_address, set call_dummy_breakpoint_offset to 0, set
call_dummy_length to 0, set call_dummy_words to NULL, set
sizeof_call_dummy_words to 0, set fix_call_dummy to
generic_fix_call_dummy, set pc_in_call_dummy to
pc_in_call_dummy_at_entry_point, set push_dummy_frame to
generic_push_dummy_frame, set push_return_address to
i386_push_return_address and set frame_chain_valid to
generic_file_frame_chain_valid.
* gdbserver/linux-x86-64-low.c (x86_64_regmap): Make it an array of
byte offsets instead of an array of indexes.
(x86_64_store_gregset, x86_64_store_fpregset): Parameter made const.
* config/mcore/tm-mcore.h (REGISTER_BYTES, NUM_REGS, PC_REGNUM)
(SP_REGNUM, FP_REGNUM, FUNCTION_START_OFFSET, DECR_PC_AFTER_BREAK)
(BREAKPOINT_FROM_PC, INNER_THAN, SAVED_PC_AFTER_CALL)
(INIT_EXTRA_FRAME_INFO, FRAME_INIT_SAVED_REGS, INIT_FRAME_PC)
(FRAME_CHAIN, FRAME_CHAIN_VALID, FRAME_SAVED_PC)
(STORE_RETURN_VALUE, DEPRECATED_EXTRACT_RETURN_VALUE)
(STORE_STRUCT_RETURN, DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS)
(SKIP_PROLOGUE, FRAME_ARGS_SKIP, FRAME_ARGS_ADDRESS)
(FRAME_LOCALS_ADDRESS, FRAME_NUM_ARGS, POP_FRAME)
(PUSH_RETURN_ADDRESS, PUSH_DUMMY_FRAME, PUSH_ARGUMENTS): Remove.
* mcore-tdep.c (mcore_init_extra_frame_info): Add fromleaf
argument so the function fits the prototype in the architecture
vector.
(mcore_pop_frame): Remove argument so the function fits the
prototype. Use get_current_frame instead of the argument.
(mcore_push_arguments): Change type of struct_return so the
function can be used in the architecture vector.
(mcore_store_struct_return): Add.
(mcore_frame_init_saved_regs): Add.
(mcore_gdbarch_init): Add function calls to replace the macros
removed from tm-mcore.h
* values.c: Include "regcache.h".
(value_being_returned): Update. Use
deprecated_grub_regcache_for_registers to extract the register
buffer address.
* value.h (value_being_returned): Change ``retbuf'' parameter to a
``struct regcache''.
* Makefile.in (values.o): Add dependency on $(regcache_h).
* inferior.h (run_stack_dummy): Change type of second parameter to
a ``struct regcache''.
* valops.c (hand_function_call): Change type of retbuf to ``struct
regcache''. Allocate using regcache_xmalloc, clean using
make_cleanup_regcache_xfree.
* infcmd.c (run_stack_dummy): Update. Use
regcache_cpu_no_passthrough instead of memcpy to copy the buffer.
* regcache.c (do_regcache_xfree): New function.
(make_cleanup_regcache_xfree): New function.
* regcache.h (make_cleanup_regcache_xfree): Declare.
* varobj.c (struct varobj_root): Change frame from CORE_ADDR to
struct frame_id.
(varobj_create): Store frame_id for root.
(varobj_gen_name): Use xasprintf.
(varobj_update): Save and restore frame using get_frame_id() and
frame_find_by_id().
(create_child): Use xasprintf.
(new_root_variable): Initialize frame_id.
(c_name_of_child): Use xasprintf. Call find_frame_by_id().
(c_value_of_variable): Use xasprintf. Move mem_fileopen call
to prevent memory leak.
Andrew Cagney [Wed, 3 Jul 2002 18:31:29 +0000 (18:31 +0000)]
* valops.c (hand_function_call): Move declaration of retbuf to
start of function, allocate using malloc, add a cleanup but before
the inf_status cleanup, cleanup the buffer. Rename local variable
old_chain to inf_status_cleanup.