* config/tc-h8300.c (h8300sxnmode): Add prototype.
(DSYMMODE): Remove.
(parse_exp): Replace expressionS argument with a h8_op. Parse the
operand size as well.
(skip_colonthing): Remove unused expression argument. Tighten checks
for 2-digit sizes.
(colonmod24): Remove.
(get_mova_operands): Combine calls to parse_exp and skip_colonthing.
(get_operand): Likewise. Use the standard code to read the size of
pc-relative operands.
(fix_operand_size): Include the size-guessing logic that used to be
in colonmod24 and get_operand. Don't apply dd:2 optimizations to
offsets with a symbolic component.
testsuite/
* gas/h8300/h8sx_disp2.[sd]: Add tests for symbolic displacements.
* win32-nat.c (solib_symbols_add): Use one variable for all section address
stuff. Pass variable rather than address of variable to safe_symbol_file_add.
* dlltool.c (prefix_encode): New function. Encode temp file prefix from pid.
(dlltmp): Pass address of pointer being alloced or suffer neverending mallocs.
(make_one_lib_file): Allocate enough space for new longer stub names.
(gen_lib_file): Ditto.
(main): Generate the temp file prefix from the pid if prefix was not specified
on the command line.
* nto-procfs.c: New file. Native procfs support for QNX Neutrino.
* config/i386/nto.mh: New file.
* config/i386/nm-nto.h: New file.
* configure.host: Add i[3456]86-*-nto*.
Jakub Jelinek [Fri, 4 Jul 2003 13:53:38 +0000 (13:53 +0000)]
bfd/
* elfxx-ia64.c (struct elfNN_ia64_link_hash_table): Add rel_fptr_sec.
(elfNN_ia64_dynamic_symbol_p): Change info->shared into
!info->executable.
(get_fptr): For -pie create .opd as writable section and create
.rela.opd as well.
(elfNN_ia64_check_relocs): Change info->shared into
!info->executable.
(allocate_fptr): Likewise.
(allocate_dynrel_entries): Account for a relative reloc for -pie
@fptr(). Don't account for a relative reloc if -pie want_ltoff_fptr
for undefweak symbol. Account for an IPLT reloc in .rela.opd
section if -pie.
(set_got_entry): Don't create a relative reloc if -pie
want_ltoff_fptr for undefweak symbol.
(set_fptr_entry): Emit an IPLT reloc in .rela.opd for -pie.
(elfNN_ia64_relocate_section): Emit a relative reloc for -pie
@fptr().
* elfxx-ia64.c (elfNN_ia64_relocate_section): Issue undefined_symbol
even if -pie.
* elf32-i386.c (elf_i386_relocate_section): Likewise.
* elf64-x86-64.c (elf64_x86_64_relocate_section): Likewise.
* elf64-sparc.c (sparc64_elf_relocate_section): Likewise.
* elf64-s390.c (elf_s390_relocate_section): Likewise.
* elf64-ppc.c (ppc64_elf_relocate_section): Likewise.
* elf64-alpha.c (elf64_alpha_relocate_section): Likewise.
* elf32-sparc.c (elf32_sparc_relocate_section): Likewise.
* elf32-s390.c (elf_s390_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_relocate_section): Likewise.
ld/
* emulparams/elf64_ia64.sh (OTHER_READONLY_SECTIONS): Don't include
.opd if -pie.
(OTHER_READWRITE_SECTIONS): Include .opd if -pie.
* scripttempl/elf.sc: Use SHLIB_DATA_ADDR instead of DATA_ADDR
if -pie.
Alan Modra [Fri, 4 Jul 2003 13:06:21 +0000 (13:06 +0000)]
* ppc-opc.c: Remove PARAMS from prototypes.
(FXM4): Define.
(insert_fxm): New function, used by both FXM and FXM4.
(extract_fxm): Likewise.
(XFXFXM_MASK): Remove 1 << 20 term.
(powerpc_opcodes): Add Power4 version of "mfcr". Simplify "mtcr" mask.
Nick Clifton [Fri, 4 Jul 2003 10:42:26 +0000 (10:42 +0000)]
* readelf.c (get_data): Print (unsigned) hex values for size and offset in
error messages.
(process_section_headers): If the string table could not be allocated, do
not continue.
Nick Clifton [Fri, 4 Jul 2003 10:25:14 +0000 (10:25 +0000)]
* elf32-h8300.c (R_H8_DIR32A16): Fix name field.
(elf32_h8_relax_section) <R_H8_DIR16A8>: Adjust position of relocation.
<R_H8_DIR32A16>: Fix type of relocation.
* ld-h8300/h8300.exp: Replace loop with explicit list. Run relax.d
unconditionally. Run relax-2.d for *-elf targets.
* ld-h8300/relax.d: Fix typo.
* ld-h8300/relax.s: Add 0x prefixes.
* ld-h8300/relad-2.[sd]: New test.
* gdbarch.sh (REGISTER_RAW_SIZE, REGISTER_VIRTUAL_SIZE): Add
predicate.
* gdbarch.h, gdbarch.c: Re-generate.
* regcache.c (init_regcache_descr): Use legacy code when either
REGISTER_BYTE or REGISTER_RAW_SIZE is set.
* gdb.base/store.c (charest): New typedef.
(add_char): Rename to add_charest, update.
(wack_char): Rename to wack_charest, update types. Return l + r
to keep r live across the call.
(wack_short, wack_int, wack_long, wack_longest, wack_float)
(wack_double, wack_doublest): Return l + r to keep r live across
the call.
* gdb.base/store.exp: Accomodate store.c changes.
Jim Blandy [Wed, 2 Jul 2003 19:20:55 +0000 (19:20 +0000)]
* s390-tdep.c (struct frame_extra_info): new member:
'stack_bought_valid'.
(s390_get_frame_info): Set fextra_info->stack_bought_valid if we
initialize fextra_info->stack_bought.
(s390_frameless_function_invocation): Don't trust the value of
fextra_info_ptr->stack_bought unless
fextra_info->stack_bought_valid is set.
Jim Blandy [Wed, 2 Jul 2003 19:05:56 +0000 (19:05 +0000)]
New S390 prologue analyzer.
* s390-tdep.c (struct prologue_value, enum pv_boolean): New types.
(pv_set_to_unknown, pv_set_to_constant, pv_set_to_register,
pv_constant_last, pv_add, pv_add_constant, pv_subtract,
pv_logical_and, pv_is_identical, pv_is_register, pv_is_array_ref,
compute_x_addr, s390_on_stack, s390_store,
s390_get_signal_frame_info): New functions.
(S390_NUM_SPILL_SLOTS): New macro.
(s390_get_frame_info): Rewritten.
(is_arg_reg): Deleted.
Break out the decoding of S/390 instructions into separate
functions, to make it more legible, and easier to check
against the spec.
* s390-tdep.c (is_ri, is_ril, is_rr, is_rre, is_rs, is_rse,
is_rx, is_rxe): New functions.
(op1_aghi, op2_aghi, op1_ahi, op2_ahi, op_ar, op_basr, op1_bras,
op2_bras, op_l, op_la, op1_larl, op2_larl, op_lgr, op1_lghi,
op2_lghi, op1_lhi, op2_lhi, op_lr, op_nr, op_ngr, op_s, op_st,
op_std, op1_stg, op2_stg, op_stm, op1_stmg, op2_stmg, op_svc): New
enums for opcode values. (Is this an improvement?)
Alan Modra [Wed, 2 Jul 2003 07:41:51 +0000 (07:41 +0000)]
* elf64-ppc.c (ppc64_elf_func_desc_adjust): Don't allow _savef* and
_restf* to be satisfied by shared libs, and always force them local.
(toc_adjusting_stub_needed): Avoid scanning linker created sections.
Correct test for "bl".
(ppc64_elf_relocate_section <R_PPC64_TLS>): Correct test for
primary opcode 31.
Andreas Schwab [Tue, 1 Jul 2003 22:32:36 +0000 (22:32 +0000)]
* ia64-tdep.c (ia64_push_dummy_call): Define as combination of
former ia64_push_arguments and ia64_push_return_address, and use
regcache functions instead of read/write_register.
(ia64_gdbarch_init): Set push_dummy_call instead of
deprecated_push_arguments and deprecated_push_return_address.
* s390-dis.c (s390_extract_operand): Add support for long displacements.
* s390-mkopc.c (s390_opcode_cpu_val): Add support for cpu type z990.
* s390-opc.c (D20_20): Add define for 20 bit displacements.
(INSTR_RRF_R0RR, INSTR_RSL_R0RD, INSTR_RSY_RRRD, INSTR_RSY_RURD,
INSTR_RSY_AARD, INSTR_RXY_RRRD, INSTR_RXY_FRRD, INSTR_SIY_URD): Add
new instruction formats.
(MASK_RRF_R0RR, MASK_RSL_R0RD, MASK_RSY_RRRD, MASK_RSY_RURD,
MASK_RSY_AARD, MASK_RXY_RRRD, MASK_RXY_FRRD, MASK_SIY_URD): Likewise.
(s390_opformats): Likewise.
* s390-opc.txt: Add new instructions for cpu type z990. Add missing
hfp instructions. Add missing instructions pgin, pgout and xsch.
* config/tc-s390.c (md_parse_option): Add cpu type z990.
(md_begin): Add minimal cpu type logic for instructions with different
binary format depending on the cpu.
(md_assemble): Remove check for minimal cpu.
(s390_insert_operand): Add support for long displacements.
(md_gather_operands): Likewise.
(tc_s390_fix_adjustable): Likewise.
(tc_s390_force_relocation): Likewise.
(md_apply_fix3): Likewise.
* trad-frame.h: Update comments, a -1 .addr is reserved.
(trad_frame_value_p, trad_frame_addr_p): Declare.
(trad_frame_reg_p): Declare.
(trad_frame_set_value): Rename trad_frame_register_value.
(trad_frame_set_unknown): Declare.
* trad-frame.c (trad_frame_realreg_p): New function.
(trad_frame_addr_p, trad_frame_value_p): New function.
(trad_frame_set_unknown): New function.
(trad_frame_alloc_saved_regs): Initialize .addr to -1, not zero.
(trad_frame_prev_register): Use trad_frame_realreg_p,
trad_frame_addr_p and trad_frame_value_p.
(trad_frame_set_value): Rename trad_frame_register_value.
* d10v-tdep.c (d10v_frame_unwind_cache): Use trad_frame_addr_p
and trad_frame_set_value.
Jim Blandy [Tue, 1 Jul 2003 00:05:37 +0000 (00:05 +0000)]
Patch from IBM (authors unspecified, probably Ulrich Weigand and
Gerhard Tonn) for argument passing on the S/390 and S/390x:
* s390-tdep.c (S390_STACK_FRAME_OVERHEAD): This is always space
for 16 registers, and then 32 more bytes.
(S390_STACK_PARAMETER_ALIGNMENT, S390_NUM_FP_PARAMETER_REGISTERS):
New macros.
(is_double_arg): The s390x doesn't handle DOUBLE_ARGS specially.
Move up in the file, since it's now used by is_simple_arg.
(is_simple_arg): Don't assume registers are four bytes long.
Exclude all double arguments. Extended floats are not simple
args.
(is_power_of_two): New function.
(pass_by_copy_ref): Call is_power_of_two, and check that the
length fits in a register, rather than listing all the acceptable
sizes. Extended floats are not passed by reference.
(s390_push_arguments): Don't assume registers are four bytes long.
Reserve an argument register to point to the buffer for structures
returned by value. Use S390_NUM_FP_PARAMETER_REGISTERS and
S390_STACK_FRAME_OVERHEAD.
projects / binutils.git / log