gdb/gdbserver/
* linux-low.c (pid_is_stopped): Delete, moved to common/.
(linux_attach_lwp_1): Adjust to use linux_proc_pid_is_stopped.
gdb/
* linux-nat.c (pid_is_stopped): Delete, moved to common/.
(linux_nat_post_attach_wait): Adjust to use
linux_proc_pid_is_stopped.
* common/linux-procfs.h (linux_proc_pid_is_stopped): Declare.
* common/linux-procfs.c (linux_proc_pid_is_stopped): New function,
based on pid_is_stopped from both linux-nat.c and
gdbserver/linux-low.c, and renamed.
Alan Modra [Mon, 27 Feb 2012 06:55:39 +0000 (06:55 +0000)]
* v850-opc.c (extract_v8): Rearrange to make it obvious this
is the inverse of corresponding insert function.
(extract_d22, extract_u9, extract_r4): Likewise.
(extract_d9): Correct sign extension.
(extract_d16_15): Don't assume "long" is 32 bits, and don't
rely on implementation defined behaviour for shift right of
signed types.
(extract_d16_16, extract_d17_16, extract_i9): Likewise.
(extract_d23): Likewise, and correct mask.
Alan Modra [Mon, 27 Feb 2012 06:48:10 +0000 (06:48 +0000)]
* elf32-sh.c (sh_elf_osec_to_segment): Check for elf flavour bfd
before calling elf specific function.
(sh_elf_osec_readonly_p): Test for error return from above.
Alan Modra [Mon, 27 Feb 2012 06:40:42 +0000 (06:40 +0000)]
* config/tc-h8300.c (constant_fits_width_p): Trim constant to 32 bits
and sign extend before range tests.
(constant_fits_size_p): Similarly.
(get_specific): Trim X_add_number to 32 bits.
(fix_operand_size): Likewise, and use unsigned test for signed
ranges.
Alan Modra [Mon, 27 Feb 2012 06:37:40 +0000 (06:37 +0000)]
gas/
* config/tc-crx.c: Include bfd_stdint.h.
(getconstant): Remove irrelevant comment. Don't fail due to
sign-extension of int mask.
(check_range): Rewrite using unsigned arithmetic throughout.
opcodes/
* crx-dis.c (print_arg): Mask constant to 32 bits.
* crx-opc.c (cst4_map): Use int array.
include/opcode/
* crx.h (cst4_map): Update declaration.
Walter Lee [Sat, 25 Feb 2012 22:40:48 +0000 (22:40 +0000)]
Fix regression from change
http://sourceware.org/ml/binutils-cvs/2012-01/msg00049.html . The
code needs to check that the symbol is not a local symbol before
accessing a non-local-symbol field.
* tc-tilepro.c (emit_tilepro_instruction): Check if symbol is
non-local before checking sy_value.
* tc-tilegx.c (emit_tilegx_instruction): Ditto.
Walter Lee [Sat, 25 Feb 2012 22:24:21 +0000 (22:24 +0000)]
Improve TLS support on TILE-Gx/TILEPro:
- Add support for TLS LE references.
- Support linker optimization of TLS references.
- Delete relocations of GOT/tp relative offsets beyond 32-bits.
This brings binutils in line with the support expected in gcc 4.7, for
TILE-Gx/TILEPro.
ld/testsuite/
* ld-tilegx/reloc-be.d: New.
* ld-tilegx/reloc-le.d: New.
* ld-tilegx/reloc.d: Delete.
* ld-tilegx/tilegx.exp: Test big and little endian.
Luis Machado [Fri, 24 Feb 2012 15:15:56 +0000 (15:15 +0000)]
2012-02-24 Luis Machado <lgustavo@codesourcery>
* server.c (handle_query): Advertise support for target-side
breakpoint condition evaluation.
(process_point_options): New function.
(process_serial_event): When inserting a breakpoint, check for
a target-side condition that should be evaluated.
* mem-break.c: Include regcache.h and ax.h.
(point_cond_list_t): New data structure.
(breakpoint) <cond_list>: New field.
(find_gdb_breakpoint_at): Make non-static.
(delete_gdb_breakpoint_at): Clear any target-side
conditions.
(clear_gdb_breakpoint_conditions): New function.
(add_condition_to_breakpoint): Likewise.
(add_breakpoint_condition): Likewise.
(gdb_condition_true_at_breakpoint): Likewise.
(gdb_breakpoint_here): Return result directly instead
of going through a local variable.
* remote.c (remote_supports_cond_breakpoints): New forward
declaration.
(remote_add_target_side_condition): New function.
(remote_insert_breakpoint): Add target-side breakpoint
conditional if supported.
(remote_insert_hw_breakpoint): Likewise.
(init_remote_ops): Set to_supports_evaluation_of_breakpoint_conditions
hook.
* target.c (update_current_target): Inherit
to_supports_evaluation_of_breakpoint_conditions.
Default to_supports_evaluation_of_breakpoint_conditions to return_zero.
* target.h (struct target_ops)
<to_supports_evaluation_of_breakpoint_conditions>: New field.
(target_supports_evaluation_of_breakpoint_conditions): New #define.
* breakpoint.c (get_first_locp_gte_addr): New forward declaration.
(condition_evaluation_both, condition_evaluation_auto,
condition_evaluation_host, condition_evaluation_target,
condition_evaluation_enums, condition_evaluation_mode_1,
condition_evaluation_mode): New static globals.
(translate_condition_evaluation_mode): New function.
(breakpoint_condition_evaluation_mode): New function.
(gdb_evaluates_breakpoint_condition_p): New function.
(ALL_BP_LOCATIONS_AT_ADDR): New helper macro.
(mark_breakpoint_modified): New function.
(mark_breakpoint_location_modified): New function.
(set_condition_evaluation_mode): New function.
(show_condition_evaluation_mode): New function.
(bp_location_compare_addrs): New function.
(get_first_location_gte_addr): New helper function.
(set_breakpoint_condition): Free condition bytecode if locations
has become unconditional. Call mark_breakpoint_modified (...).
(condition_command): Call update_global_location_list (1) for
breakpoints.
(breakpoint_xfer_memory): Use is_breakpoint (...).
(is_breakpoint): New function.
(parse_cond_to_aexpr): New function.
(build_target_condition_list): New function.
(insert_bp_location): Handle target-side conditional
breakpoints and call build_target_condition_list (...).
(update_inserted_breakpoint_locations): New function.
(insert_breakpoint_locations): Handle target-side conditional
breakpoints.
(bpstat_check_breakpoint_conditions): Add comment.
(bp_condition_evaluator): New function.
(bp_location_condition_evaluator): New function.
(print_breakpoint_location): Print information on where the condition
will be evaluated.
(print_one_breakpoint_location): Likewise.
(init_bp_location): Call mark_breakpoint_location_modified (...) for
breakpoint location.
(force_breakpoint_reinsertion): New functions.
(update_global_location_list): Handle target-side breakpoint
conditions.
Reinsert locations that are already inserted if conditions have
changed.
(bp_location_dtor): Free agent expression bytecode.
(disable_breakpoint): Call mark_breakpoint_modified (...).
Call update_global_location_list (...) with parameter 1 for breakpoints.
(disable_command): Call mark_breakpoint_location_modified (...).
Call update_global_location_list (...) with parameter 1 for breakpoints.
(enable_breakpoint_disp): Call mark_breakpoint_modified (...).
(enable_command): mark_breakpoint_location_modified (...).
(_initialize_breakpoint): Update documentation and add
condition-evaluation breakpoint subcommand.
* breakpoint.h: Include ax.h.
(condition_list): New data structure.
(condition_status): New enum.
(bp_target_info) <cond_list>: New field.
(bp_location) <condition_changed, cond_bytecode>: New fields.
(is_breakpoint): New prototype.
* remote.c (remote_state) <cond_breakpoints>: New field.
(PACKET_ConditionalBreakpoints): New enum.
(remote_cond_breakpoint_feature): New function.
(remote_protocol_features): Add new ConditionalBreakpoints entry.
(remote_supports_cond_breakpoints): New function.
(_initialize_remote): Add new packet configuration for
target-side conditional breakpoints.
Nick Clifton [Fri, 24 Feb 2012 10:54:47 +0000 (10:54 +0000)]
PR ld/13730
* reloc.c (bfd_generic_get_relocated_section_contents): Issue an
error message instead of aborting, when an outofrange reloc is
encountered.
Jan Kratochvil [Fri, 24 Feb 2012 00:40:01 +0000 (00:40 +0000)]
gdb/testsuite/
Fix false FAILs on old CPUs without SSE.
* gdb.reverse/i386-sse-reverse.exp (continue to end of sse_test):
Return untested for Illegal instruction.
Iain Sandoe [Thu, 23 Feb 2012 16:29:56 +0000 (16:29 +0000)]
deal with endian-ness in mach-o non-scattered relocs.
BFD:
* mach-o.c (bfd_mach_o_swap_in_non_scattered_reloc): New.
(bfd_mach_o_canonicalize_one_reloc): Swap non-scattered reloc
bit-fields when target and host differ in endian-ness. When
PAIRs are non-scattered find the 'symbol' from the preceding
reloc. Add FIXME re. reloc symbols on section boundaries.
(bfd_mach_o_swap_out_non_scattered_reloc): New.
(bfd_mach_o_write_relocs): Use bfd_mach_o_encode_non_scattered_reloc.
include/mach-o:
* external.h: Add comments about relocations fields. Add macros
for non-scattered relocations. Move scattered relocation macros to here.
* reloc.h: Remove macros related to external representation of reloc fields.
* ada-tasks.c (struct ada_tasks_inferior_data): Add
known_tasks_element and known_tasks_length fields.
(read_known_tasks_array): Change argument type. Use pointer type
and number of elements from DATA. Adjust.
(read_known_tasks_list): Likewise.
(get_known_tasks_addr): Remove.
(ada_set_current_inferior_known_tasks_addr): Renamed to ...
(ada_tasks_inferior_data_sniffer): ... this. Use symtab for element
type and array length. Merge former get_known_tasks_addr code.
Nick Clifton [Wed, 22 Feb 2012 16:27:35 +0000 (16:27 +0000)]
PR ld/13683
* ldlang.c (lang_process): Rerun lang_do_assignments before
starting garbage collection.
* ldexp.c (fold_name): Generate a reloc for defined symbols
found without an associated output section during the mark phase.
(exp_fold_tree_1): Continue processing an expression, even if we
are unable to fold it, if we are in the first two evaluation
phases.
* ldexp.h (enum lang_phase_type): Add descriptions of the phases.
* ld-gc/pr13683.c: New test source file.
* ld-gc/pr13683.d: New test control and output file.
* ld-gc/gc.exp: Run the pr13683 test.
* lib/gdb.exp: Add description of test prefixes.
(with_test_prefix): New procedure.
* gdb.arch/altivec-abi.exp: Use with_test_prefix.
* gdb.base/attach-pie-misread.exp: Use with_test_prefix.
* gdb.base/break-interp.exp: Use with_test_prefix. Use append
instead of lappend to append to pf_prefix.
* gdb.base/catch-load.exp: Use with_test_prefix.
* gdb.base/disp-step-syscall.exp: Use with_test_prefix.
* gdb.base/jit-so.exp: Use with_test_prefix.
* gdb.base/jit.exp: Use with_test_prefix.
* gdb.base/return-nodebug.exp (do_test): Use append instead of
lappend to append to pf_prefix.
* gdb.base/sepdebug.exp: Use with_test_prefix.
* gdb.base/solib-display.exp: Use with_test_prefix.
* gdb.base/solib-overlap.exp: Use with_test_prefix.
* gdb.base/watch-cond-infcall.exp: Use with_test_prefix.
* gdb.base/watchpoint.exp: Use with_test_prefix.
* gdb.dwarf2/dw2-noloc.exp: Use with_test_prefix.
* gdb.mi/mi-watch.exp: Use with_test_prefix.
* gdb.mi/mi2-watch.exp: Use with_test_prefix.
* gdb.threads/non-ldr-exc-1.exp: Use with_test_prefix.
* gdb.threads/non-ldr-exc-2.exp: Use with_test_prefix.
* gdb.threads/non-ldr-exc-3.exp: Use with_test_prefix.
* gdb.threads/non-ldr-exc-4.exp: Use with_test_prefix.
* gdb.threads/watchpoint-fork.exp: Use with_test_prefix. Use
append instead of lappend to append to pf_prefix.
* gdb.threads/watchthreads-reorder.exp: Use with_test_prefix.
* gdb.trace/change-loc.exp: Use with_test_prefix.
* gdb.trace/pending.exp: Use with_test_prefix.
* gdb.trace/status-stop.exp: Use with_test_prefix.
* gdb.trace/strace.exp: Use with_test_prefix.
* gdb.trace/trace-break.exp: Use with_test_prefix.
* gdb.trace/unavailable.exp: Use with_test_prefix. Use append
instead of lappend to append to pf_prefix.
* ia64-tdep.c: Do not include libunwind-ia64.h.
* libunwind-frame.h: Remove #ifdef HAVE_LIBUNWIND_H guard.
Include libunwind-ia64.h instead of libunwind.h.
* configure.ac (--with-libunwind, $enable_libunwind): Don't check
for libunwind.h existence.
* configure, config.in: Regenerate.
Kai Tietz [Tue, 21 Feb 2012 16:10:12 +0000 (16:10 +0000)]
PR binutils/13682
* NEWS: Mention new feature.
* dlltool.c (i386_x64_dljtab): New stub-code for x64
delayed-load feature.
(i386_x64_trampoline): New trampoline-code for x64
delayed-load feature.
(make_one_lib_file): Add support for x64 delayed-load
feature.
(make_delay_head): Likewis
Anton Gorenkov [Tue, 21 Feb 2012 13:48:59 +0000 (13:48 +0000)]
gdb/
* c-valprint.c (c_value_print): Use value_rtti_indirect_type
instead of value_rtti_target_type.
* eval.c (evaluate_subexp_standard): Use value_rtti_indirect_type
instead of value_rtti_target_type.
* typeprint.c (whatis_exp): Use value_rtti_indirect_type instead of
value_rtti_target_type.
* valops.c (value_ind): Extract function readjust_indirect_value_type.
(value_rtti_target_type): Rename to ...
(value_rtti_indirect_type): ... here and make it indirect. Update
function comment.
* value.c (readjust_indirect_value_type): New function.
(coerce_ref): Support for enclosing type setting for references
with readjust_indirect_value_type.
* value.h (readjust_value_type): New declaration.
(value_rtti_target_type): Rename to ...
(value_rtti_indirect_type): ... here.
Iain Sandoe [Mon, 20 Feb 2012 19:44:40 +0000 (19:44 +0000)]
gas:
* config/obj-macho.c (obj_mach_o_make_or_get_sect): In the absence of
canonical information, try to determine CODE and DEBUG section flags
from the mach-o section data.
* gdb.threads/attach-into-signal.exp (corefunc): Don't enable
lin-lwp output. Set SIGALRM to stop. Adjust tests to not rely on
gdb's internal debug output. For the non-threaded case, look for
"Program received signal SIGLARM", for the threaded case, peek at
the thread's siginfo.
General cleanup, make output test messages unique, and build
different executable files for the non-threaded and threaded
cases.
* gdb.threads/attach-into-signal.exp (binfile, escapedbinfile):
Delete.
(executable_nothr, executable_thr): New globals.
(top level): Adjust to delete both executables.
(corefunc): New parameter $executable. Set $pf_prefix instead of
hand writing a prefix in tests. Issue a clean_restart and enable
lin-lwp debug output here.
(top level): Adjust. Use build_executable. Don't start gdb here,
and don't enable lin-lwp debug output here.
* gdb.threads/Makefile.in (EXECUTABLES): Adjust.
projects / binutils.git / log