Doug Evans [Wed, 14 Dec 2011 20:53:57 +0000 (20:53 +0000)]
* defs.h (wait_to_die_with_timeout): Declare.
* utils.c: #include "gdb_wait.h".
(sigalrm_handler, wait_to_die_with_timeout): New functions.
* ser-pipe.c: Don't #include "gdb_wait.h".
(pipe_close): Give child a chance to die on its own after closing
its stdin before SIGTERM'ing it.
Joel Brobecker [Wed, 14 Dec 2011 20:24:59 +0000 (20:24 +0000)]
fix uninitialized field in ada-lang.c (struct match_data)
Field found_sym in add_nonlocal_symbols's struct match_data is
used uninitialized. Rather than adding the initialization of
this field (to zero), we set the entire structure to zero first,
and then set the fields that need to be initialized to non-zero
next.
gdb/ChangeLog:
* ada-lang.c (add_nonlocal_symbols): Initialize data to
all zeros. Remove setting of data.arg_sym to NULL.
* linux-nat.c (linux_nat_new_thread): Change parameter to an lwp
pointer.
(linux_nat_prepare_to_resume): New global.
(lwp_free): New.
(purge_lwp_list): Use it.
(add_lwp): Call linux_nat_new_thread even on the first LWP.
Adjust to interface change.
(delete_lwp): Call lwp_free instead of xfree.
(detach_callback, linux_nat_detach, resume_lwp, linux_nat_resume)
(linux_handle_syscall_trap, linux_handle_extended_wait)
(linux_nat_filter_event, resume_stopped_resumed_lwps): Call
linux_nat_prepare_to_resume before resuming.
(linux_stop_lwp): New.
(linux_nat_set_new_thread): Adjust.
(linux_nat_set_prepare_to_resume): New.
* linux-nat.h (struct arch_lwp_info): Forward declare.
(struct lwp_info) <arch_private>: New field.
(linux_stop_lwp): Declare.
(linux_nat_set_new_thread): Adjust.
(linux_nat_set_prepare_to_resume): New.
* i386-nat.c (DR_NADDR, DR_STATUS, DR_CONTROL)
(struct i386_debug_reg_state): Move to i386-nat.h.
(dr_mirror): Comment.
(i386_debug_reg_state): New.
(i386_update_inferior_debug_regs): Simplify.
(i386_stopped_data_address): Use the debug register state from the
inferior, not from the local cache.
* i386-nat.h (struct i386_dr_low_type): Delete reset_addr and
unset_status fields. New get_addr and get_control fields.
(DR_FIRSTADDR, DR_LASTADDR, DR_CONTROL): Moved from i386-nat.c.
(DR_NADDR, DR_STATUS): New.
(struct i386_debug_reg_state): Moved from i386-nat.c.
* amd64-linux-nat.c (struct arch_lwp_info): New.
(amd64_linux_dr): Delete global.
(amd64_linux_dr_get_addr): New.
(amd64_linux_dr_get_control): New.
(amd64_linux_dr_unset_status): Delete.
(amd64_linux_dr_set_addr): Reimplement.
(amd64_linux_dr_reset_addr): Delete.
(update_debug_registers_callback): New.
(amd64_linux_dr_set_control): Reimplement.
(amd64_linux_dr_set_addr): Reimplement.
(amd64_linux_prepare_to_resume): New.
(amd64_linux_new_thread): Change parameter to an lwp pointer.
Reimplement.
(_initialize_amd64_linux_nat): No longer install
i386_dr_low.reset_addr and i386_dr_low.unset_status. Install
amd64_linux_dr_get_control as i386_dr_low.get_control. Install
amd64_linux_dr_get_addr as i386_dr_low.get_addr. Install
amd64_linux_prepare_to_resume.
* i386-linux-nat.c (DR_FIRSTADDR, DR_LASTADDR, DR_STATUS)
(DR_CONTROL): Delete.
(struct arch_lwp_info): New.
(i386_linux_dr): Delete global.
(i386_linux_dr_set_control): Reimplement.
(i386_linux_dr_get_addr): New.
(i386_linux_dr_set_addr): Reimplement.
(i386_linux_dr_get_control): New.
(update_debug_registers_callback): New.
(i386_linux_dr_unset_status): Delete.
(i386_linux_dr_set_addr): Reimplement.
(i386_linux_prepare_to_resume): New.
(i386_linux_new_thread): Change parameter to an lwp pointer.
Reimplement.
(_initialize_i386_linux_nat): No longer install
i386_dr_low.reset_addr and i386_dr_low.unset_status. Install
i386_linux_dr_get_control as i386_dr_low.get_control. Install
i386_linux_dr_get_addr as i386_dr_low.get_addr. Install
i386_linux_prepare_to_resume.
* ia64-tdep.c (ia64_memory_remove_breakpoint): Use
target_write_raw_memory.
* m32r-tdep.c (m32r_memory_remove_breakpoint): Use
target_write_raw_memory.
* microblaze-linux-tdep.c
(microblaze_linux_memory_remove_breakpoint): Use
target_write_raw_memory.
* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Use
target_write_raw_memory.
* gdb.texinfo (Implementing a Remote Stub): Explain that you
should transfer control to the stub in the startup code instead of
in main. Mention the need to get past the initial breakpoint.
Nick Clifton [Wed, 14 Dec 2011 11:50:13 +0000 (11:50 +0000)]
PR ld/12451
* elfcode.h (elf_checksum_contents): Read in the section's
contents if they are not already available.
* compress.c (bfd_get_full_section_contents): Use zmalloc to
allocate the buffers so that excess bytes are guaranteed to be
zero.
* mach-o-i386.c (text_section_names_xlat): New table.
(data_section_names_xlat): Likewise.
(import_section_names_xlat): Likewise.
(mach_o_i386_segsec_names_xlat): Likewise.
(bfd_mach_o_tgt_seg_table): Use new tables.
* mach-o-x86-64.c (bfd_mach_o_tgt_seg_table): Set NULL.
* mach-o.c (mach_o_section_name_xlat, mach_o_segment_name_xlat):
Move to mach-o.h as typedefs.
(text_section_names_xlat): Update for current GCC usage.
(data_section_names_xlat): Likewise.
(dwarf_section_names_xlat): Likewise.
(objc_section_names_xlat): New table.
(segsec_names_xlat): Add objc table.
(bfd_mach_o_normalize_section_name): Replace with...
(bfd_mach_o_section_data_for_mach_sect): New.
(bfd_mach_o_section_data_for_bfd_name): New.
(bfd_mach_o_section_data_for_bfd_name): Update to use additional data.
(bfd_mach_o_convert_section_name_to_mach_o): Likewise.
(bfd_mach_o_bfd_copy_private_section_data): Implement.
(bfd_mach_o_write_symtab): Write a zero-length string as the first entry
for compatibility with system tools.
(bfd_mach_o_build_commands): Update section alignment info.
(bfd_mach_o_new_section_hook): Use translation table data to define
default section flags, type, attributes and alignment, when available.
(bfd_mach_o_init_section_from_mach_o): Add TODO comment.
(bfd_mach_o_section_type_name): Add 'symbol_stubs'.
(bfd_mach_o_section_attribute_name): Add 'self_modifying_code'.
(bfd_mach_o_get_section_type_from_name): Change "not-found" return
value.
(bfd_mach_o_tgt_seg_table): Set default NULL.
* mach-o.h (bfd_mach_o_segment_command): Use define for name length.
(bfd_mach_o_backend_data): Move until after contents are defined.
(bfd_mach_o_normalize_section_name): Remove.
(bfd_mach_o_convert_section_name_to_bfd): Declare.
(mach_o_section_name_xlat): Declare.
(mach_o_segment_name_xlat): Declare.
(bfd_mach_o_section_data_for_mach_sect): Declare.
(bfd_mach_o_section_data_for_bfd_name): Declare.
* gdb.texinfo (Implementing a Remote Stub): Explain that you
should transfer control to the stub in the startup code instead of
in main. Mention the need to get past the initial breakpoint.
* i386-low.c (i386_low_stopped_data_address): Avoid fetching
DR_CONTROL unless necessary. Extend comments.
* linux-x86-low.c (x86_linux_prepare_to_resume): Don't write to
DR0-3 if not used. If any watchpoint was set, clear DR_STATUS.
* dwarf2.c (bfd_dwarf2_cleanup_debug_info): Accept stash as an
argument like other functions to support formats other than ELF.
* elf-bfd.h (bfd_dwarf2_cleanup_debug_info): Move to bfd-in.h.
* elf.c (_bfd_elf_close_and_cleanup): Pass dwarf2_find_line_info
in tdata as a parameter.
* libbfd-in.h (bfd_dwarf2_cleanup_debug_info): Move from
elf-bfd.h.
* libbfd.h (bfd_dwarf2_cleanup_debug_info): Regenerate.
* mach-o-target.c (bfd_mach_o_close_and_cleanup): Remove the
fallback macro.
(bfd_mach_o_find_nearest_line): Likewise.
* mach-o.c (bfd_mach_o_find_nearest_line): Add the definition
which calls _bfd_dwarf2_find_nearest_line.
(bfd_mach_o_close_and_cleanup): Likewise.
* mach-o.h (mach_o_data_struct): Add dwarf2_find_line_info.
(bfd_mach_o_find_nearest_line): Add declaration.
(bfd_mach_o_close_and_cleanup): Add declaration.
Alan Modra [Tue, 13 Dec 2011 08:19:02 +0000 (08:19 +0000)]
* ppc-opc.c (ISA_V2): Define and use for relevant BO field tests.
(valid_bo_pre_v2, valid_bo_post_v2): New functions, extracted from..
(valid_bo): ..here. When disassembling, accept either 'y' or 'at'
type encoding on second pass.
(powerpc_opcodes): Use ISA_V2 to enable branch insns rather than
POWER4.
* ppc-dis.c (print_insn_powerpc): Delete dialect_orig. Instead
ignore deprecated on second pass.
Joel Brobecker [Sun, 11 Dec 2011 17:37:56 +0000 (17:37 +0000)]
[Ada] Make the exception_support_info data per inferior.
The ada-lang module was using a static global called "exception_info"
for all inferiors. But each inferior might be different, and thus
this patch makes this data per-inferior.
gdb/ChangeLog:
* ada-lang.c (struct ada_inferior_data) [exception_info]:
New field.
(exception_info): Delete.
(ada_exception_support_info_sniffer): Get exception_support_info
data from our per-inferior data. Adjust code accordingly.
(ada_unhandled_exception_name_addr_from_raise): Likewise.
(ada_exception_name_addr_1, ada_exception_sym_name): Ditto.
(ada_executable_changed_observer): Delete.
(_initialize_ada_language): Remove call to
observer_attach_executable_changed.
Joel Brobecker [Sun, 11 Dec 2011 17:36:10 +0000 (17:36 +0000)]
Warn if missing debug info for Ada exception catchpoints
This patch should help the user understand why the debugger is not
able to insert Ada exception catchpoints when the Ada runtime was
stripped of debugging info, as is often the case on many GNU/Linux
distros:
(gdb) catch exception
Your Ada runtime appears to be missing some debugging information.
Cannot insert Ada exception catchpoint in this configuration.
gdb/ChangeLog:
* ada-lang.c (ada_has_this_exception_support): Raise an error
if we could find the Ada exception hook in the Ada runtime,
but no debugging info for that hook.
gdb/testsuite/ChangeLog:
* gdb.ada/catch_ex.exp, gdb.ada/mi_catch_ex.exp: Adjust
expected output for unsupported case.
Joel Brobecker [Sun, 11 Dec 2011 17:35:34 +0000 (17:35 +0000)]
Ada exception catchpoint support cleanup.
This patch cleans up a bit the way we detect which type of runtime
the program uses with respect to Ada exceptions. It also removes
an unnecessary check in ada_exception_sal which is already performed
by ada_exception_support_info_sniffer.
Some of the changes are preparation work for detecting the situation
where the Ada runtime is found, but lacking debugging info.
gdb/ChangeLog:
* ada-lang.c (ada_has_this_exception_support): New function,
extracted out of ada_exception_sal and ada_exception_sal.
(ada_exception_support_info_sniffer): Simplify by using
ada_has_this_exception_support.
(ada_exception_sal): Replace unnecessary checks by assertions.
Minor simplifications.
Dave Anglin [Sun, 11 Dec 2011 15:42:10 +0000 (15:42 +0000)]
PR binutils/13476
* elf32-hppa.c (final_link_relocate): Convert R_PARISC_TLS_GD21L,
R_PARISC_TLS_LDM21L and R_PARISC_TLS_IE21L relocations to
R_PARISC_DPREL21L when not doing a shared link. Likewise convert
R_PARISC_TLS_GD14R, R_PARISC_TLS_LDM14R and R_PARISC_TLS_IE14R to
R_PARISC_DPREL14R. Handle R_PARISC_TLS_GD21L, R_PARISC_TLS_LDM21L
and R_PARISC_TLS_IE21L with R_PARISC_DLTIND21L.
* elfxx-mips.c (mips_elf_link_hash_table.rld_value): Remove.
(mips_elf_link_hash_table.rld_symbol): New field;
(MIPS_ELF_RLD_MAP_SIZE): New macro.
(_bfd_mips_elf_add_symbol_hook): Remember __rld_obj_head symbol
in rld_symbol.
(_bfd_mips_elf_create_dynamic_sections): Remember __rld_map symbol
in rld_symbol.
(_bfd_mips_elf_size_dynamic_sections): Set correct size for .rld_map.
(_bfd_mips_elf_finish_dynamic_symbol): Remove .rld_map handling.
(_bfd_mips_elf_finish_dynamic_sections): Use rld_symbol to
calculate DT_MIPS_RLD_MAP value.
(_bfd_mips_elf_link_hash_table_create): Initialize rld_symbol,
quit initializing rld_value.
Jan Kratochvil [Sat, 10 Dec 2011 15:58:14 +0000 (15:58 +0000)]
gdb/testsuite/
* gdb.cp/static-method.exp (have_gcc_45682_fixed, info addr A::func()):
New variable, new test.
(list static-method.cc:xxx::(anonymous namespace)::A::func)
(list 'static-method.cc:xxx::(anonymous namespace)::A::func')
(list 'static-method.cc':'xxx::(anonymous namespace)::A::func')
(list static-method.cc:'xxx::(anonymous namespace)::A::func'): KFAIL
them if HAVE_GCC_45682_FIXED is not set.
* mips-dis.c (mips_arch_choices): Add Octeon2.
For "octeon+", just include OcteonP for the insn.
* mips-opc.c (IOCT): Include Octeon2.
(IOCTP): Include Octeon2.
(IOCT2): New macro.
(mips_builtin_opcodes): Add "laa", "laad", "lac", "lacd", "lad",
"ladd", "lai", "laid", "las", "lasd", "law", "lawd".
Move "lbux", "ldx", "lhx", "lwx", and "lwux" up to where the standard
loads are, and add IOCT2 to them.
Add "lbx" and "lhux".
Add "qmac.00", "qmac.01", "qmac.02", "qmac.03", "qmacs.00",
"qmacs.01", "qmacs.01", "qmacs.02" and "qmacs.03".
Add "zcb" and "zcbt".
* mips-tdep.c (extended_offset): Correct calculation.
(unpack_mips16): Correct bitfield positions used for extraction
of the immediate argument; fix sign-extension of same.
(extended_mips16_next_pc): Correct B instruction's offset
calculation. Correct register decoding of the BEQZ and BNEZ
as well as jump-register instructions. Handle compact jumps.
* gas/config/tc-arm.c (ARM_IT_MAX_OPERANDS): New define.
(arm_it): Use ARM_IT_MAX_OPERANDS.
(neon_select_shape): Ensure we have matched all operands.
* gas/testsuite/gas/arm/neon-suffix-bad.l: Add testcase.
* gas/testsuite/gas/arm/neon-suffix-bad.s: Likewise.
* gdb.ada/catch_ex.exp: Skip as unsupported if "catch exception"
throws "Cannot insert catchpoints in this configuration".
* gdb.ada/mi_catch_ex.exp: Likewise.
projects / binutils.git / log