Mark Kettenis [Mon, 29 Oct 2001 23:54:56 +0000 (23:54 +0000)]
* config/i386/tm-i386v.h: Don't include "regcache.h".
(EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE, FRAME_CHAIN,
FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC, FRAME_NUM_ARGS):
Remove macros. The versions from "tm-i386.h" should work fine
(and in most cases even better).
Mark Kettenis [Mon, 29 Oct 2001 23:49:31 +0000 (23:49 +0000)]
* i386-tdep.c (i386_extract_return_value): Use
convert_typed_floating to extract floating-point value from
register buffer.
(i386_store_return_value): Use convert_typed_floating to store
floating-point return balue in register buffer
(i386_register_virtual_type): Change type of floating-point
registers to builtin_type_i387_ext.
(i386_register_convert_to_virtual): Use convert_typed_floating to
do the conversion.
(i386_register_convert_to_raw): Likewise.
Corinna Vinschen [Mon, 29 Oct 2001 18:20:22 +0000 (18:20 +0000)]
* gdb.base/call-ar-st.c (print_double_array): Match for loop
with new double_array size.
(main): Change storage class of all local variables to static.
Reduce size of double_array to 9.
* gdb.base/call-ar-st.exp: Increase timeout value.
Change expected output for double array to match new size in
call-ar-st.c.
Mark Kettenis [Sun, 28 Oct 2001 22:06:27 +0000 (22:06 +0000)]
* doublest.c: Improve comments a bit.
(floatformat_from_length): New function.
(NAN): Define to 0.0 if not already defined.
(extract_floating): Rewrite to use floatformat_from_length. Warn
instead of error if LEN doesn't match a known floating-point type,
and return NaN (or 0.0 if NaN isn't available) in that case.
(store_floating): Likewise, but zero out the target byte-stream if
LEN doesn't match a known floating-point type.
(extract_typed_floating): Reformat a bit.
(store_typed_floating): Reformat a bit. Add comment about zeroing
out padding in the target buffer.
* doublest.h (extract_floating, store_floating): Fix comment about
deprecation of these functions. Add parameter names to prototypes.
* cris-tdep.c (constraint): Loop through the whole cris_spec_regs
struct, not just the NUM_SPECREGS first entries.
(bdap_prefix): Read PC before autoincrement.
Corinna Vinschen [Fri, 26 Oct 2001 09:29:31 +0000 (09:29 +0000)]
* win32-nat.c (DebugSetProcessKillOnExit): New static function
pointer to Windows' DebugSetProcessKillOnExit() function.
(DebugActiveProcessStop): Ditto for DebugActiveProcessStop().
(has_detach_ability): New function.
(child_attach): If system has detach ability, enable it.
(child_detach): If system has detach ability, actually
detach from process.
Change tty output to Linux format.
Andrew Cagney [Fri, 26 Oct 2001 04:37:54 +0000 (04:37 +0000)]
Chirp fixes:
* hw_htab.c (htab_map_binary): Don't try to map the text section
when it is empty.
* emul_chirp.c (map_over_chirp_note): Default load-base to -1 not
CHIRP_LOAD_BASE.
(emul_chirp_create): Map in the interrupt table.
Jim Blandy [Wed, 24 Oct 2001 17:10:18 +0000 (17:10 +0000)]
Isolate STABS readers' use of the `textlow' and `texthigh' fields
of `struct partial_symtab' to only a few locations. This change
is not supposed to affect the way the values are computed, only
where they live.
* dbxread.c (struct symloc): Add `textlow' and `texthigh' fields
to the reader-specific structure.
* mdebugread.c (struct symloc): Same.
* dbxread.c (TEXTLOW, TEXTHIGH): New accessor macros.
* mdebugread.c (TEXTLOW, TEXTHIGH): Same.
* dbxread.c (dbx_symfile_read): After we've built all our partial
symbol tables, set each partial symtab's `textlow' and `texthigh'
fields from our reader-specific structure.
* mdebugread.c (mdebug_build_psymtabs): Same.
* dbxread.c (start_psymtab): Initialize the reader-specific
structure's `textlow' and `texthigh' from the new psymtab's.
* mdebugread.c (parse_partial_symbols, new_psymtab): Same.
* dbxread.c (read_dbx_symtab, end_psymtab, read_ofile_symtab): Use
the reader-specific `textlow' and `texthigh', not the generic
psymtab fields.
* mdebugread.c (parse_lines, parse_partial_symbols,
psymtab_to_symtab_1): Same.
* partial-stab.h: Same.
* mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
"bltzall" as writing GPR 31 (since they do).
* mips-dis.c (print_insn_arg): Calculate info->target
where appropriate.
(print_insn_mips): Fill in instruction info.
(print_mips16_insn_arg): Remove unneded variable 'val'.
Removed duplicated instruction target calculations,
calculate once and print that result. Use same idiom for
masking the jump segment bits as is used in print_insn_arg.
* gas/mips/beq.s: Add zero words at end of instructions so
that objdump will print "..." when disassembling.
* gas/mips/beq.d: Update for disassembler changes which force
branch delay-slot nops to be printed.
* gas/mips/bge.d: Ditto.
* gas/mips/bgeu.d: Ditto.
* gas/mips/blt.d: Ditto.
* gas/mips/bltu.d: Ditto.
* gas/mips/jal-svr4pic.d: Ditto.
* gas/mips/jal-xgot.d: Ditto.
Alan Modra [Tue, 23 Oct 2001 03:55:24 +0000 (03:55 +0000)]
* elflink.h (elf_link_input_bfd): Zero the reloc instead of doing
bfd_reloc_type_lookup (bfd, BFD_RELOC_NONE) as bfd_reloc_type_lookup
doesn't accept BFD_RELOC_* on some targets, eg. hppa.
* elf32-hppa.c (elf32_hppa_link_hash_entry): Remove plt_abs.
(hppa_link_hash_newfunc): Likewise.
(elf32_hppa_finish_dynamic_symbol): Likewise.
(allocate_dynrelocs): Always allocate .got relocs if shared.
(elf32_hppa_relocate_section): Output them too. Similarly
consolidate .plt reloc code, and no longer initialise .plt
when a reloc is output.
(elf32_hppa_finish_dynamic_symbol): Only initialise .plt entries
when no reloc is output.
From Herbert Xu <[email protected]>
* elf32-hppa.c (final_link_relocate): Call bfd_set_error for
unreachable branches.
Andrew Cagney [Sat, 20 Oct 2001 19:32:40 +0000 (19:32 +0000)]
* alpha-nat.c: Include <alpha/coreregs.h> instead of
<machine/reg.h>.
(fetch_osf_core_registers): Define core_reg_mapping in a way that
works on OSF5 as well as previous OSF versions.
Alan Modra [Sat, 20 Oct 2001 13:49:00 +0000 (13:49 +0000)]
* ldgram.y (mri_script_command): Surround processing of INCLUDE
with ldlex_script, ldlex_popstate.
(ifile_p1): Likewise.
* ldlex.l (EOF): Don't BEGIN(SCRIPT). Restore lineno from the
correct slot.
(lex_push_file): Save current lineno to lineno_stack. Set lineno
to 1. Don't BEGIN(SCRIPT).
(lex_redirect): Similarly.
* ldmain.c (main): Set yydebug non-zero if YYDEBUG.
DJ Delorie [Fri, 19 Oct 2001 00:00:55 +0000 (00:00 +0000)]
* pe-dll.c (autofilter_objectlist): Add startup objects
for profiling.
(auto-export): Constify char * p.
Extract file basename and use strcmp rather than ststr
for object lookup.
projects / binutils.git / log