John Gilmore [Fri, 11 Sep 1992 09:11:11 +0000 (09:11 +0000)]
* xm-mips.h (KERNEL_U_ADDR): Get from <machine/param.h>.
(REGISTER_U_ADDR): Fix up for Ultrix 4.2.
* tm-tahoe.h, xm-tahoe.h (KERNEL_U_ADDR): Move macro to xm-tahoe.h.
* stack.c (_initialize_stack): "dow" should be a valid abbreviation
for "down". Suggested by Richard Stallman.
John Gilmore [Fri, 11 Sep 1992 09:08:28 +0000 (09:08 +0000)]
* mips-xdep.c (REGISTER_PTRACE_ADDR, fetch_inferior_registers,
store_inferior_registers): Replace unexplained numbers
with manifest constants from a DECstation header file.
* xm-mips.h (KERNEL_U_ADDR): Get from <machine/param.h>.
(REGISTER_U_ADDR): Fix up for Ultrix 4.2.
* tm-tahoe.h, xm-tahoe.h (KERNEL_U_ADDR): Move macro to xm-tahoe.h.
* stack.c (_initialize_stack): "dow" should be a valid abbreviation
for "down". Suggested by Richard Stallman.
John Gilmore [Thu, 10 Sep 1992 20:31:10 +0000 (20:31 +0000)]
* opncls.c (bfd_fdopenr): Determine whether to fdopen for
update, based on how the underlying file was opened. Obsoletes
FASCIST_FDOPEN.
* hosts/rs6000.h, hosts/tahoe.h, hosts/vaxbsd.h: Remove
all FASCIST_FDOPEN config defines.
* configure.in, config.sub: added new target m68010-adobe-scout,
with alias of adobe68k. Changed configure.in to check for
-scout before -sco* to avoid a false match.
* Makefile.in: added AS_FOR_TARGET, passed down in
TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
the C compiler to use to create programs which are run in the
build environment, set it to default to $(CC), and passed it down
in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
* input-scrub.c (input_scrub_push): call input_file_begin, not
input_scrub_begin.
messages.c (as_perror): print ": " between the passed in error and
the strerror, like perror does.
* Makefile.in: added TARGET_FLAGS_TO_PASS, CC_FOR_TARGET,
AR_FOR_TARGET, RANLIB_FOR_TARGET, NM_FOR_TARGET. Pass
TARGET_FLAGS_TO_PASS, which defines CC, AR, RANLIB and NM as the
FOR_TARGET variants, to newlib and libg++.
* tc-m68k.c (m68k_ip, m68k_ip_op, get_num, try_moto_index): merge
Motorola and MIT syntax; gas can now assemble either type of
file.
tc-m68kmote.c, tc-m68kmote.h: removed now superfluous files.
From Steve Chamberlain:
m68kcoff.mt: for m68k COFF.
obj-coffbfd.c: (fixup_mdeps) added
(size_section) removed bad sanity check
(fill_section) added rs_machine_dependent case
(write_object_file) call fixup_mdeps
(fixup_segment) set fx_subsy to 0.
obj-coffbfd.h: define WORKING_DOT_WORD (too hard to support) and
handle m68k.
tc-m68k.c, config/tc-m68k.h: added m68k COFF support and Motorala
pseudo ops.
* Makefile.in: use gas_target instead of modifying target_cpu.
From Steve Chamberlain:
Makefile.in: Handle m68*-*-coff*.
read.c, read.h: add mult argument to s_space
Stu Grossman [Wed, 9 Sep 1992 04:09:56 +0000 (04:09 +0000)]
* serial.h: Fix prototye for serial_raw().
* ser-bsd.c, ser-termios.c: Fix args for serial_open() &
serial_write() to match prototypes.
* remote-st2000.c (get_reg_name): Make *p be const.
Stu Grossman [Tue, 8 Sep 1992 22:51:31 +0000 (22:51 +0000)]
* a68v-xdep.c (store_inferior_registers): declare as void.
* infptrace.c: HP/Apollos have ptrace.h in the wrong place.
* remote-st2000.c: Massive changes to use new serial package.
Also added 'connect' command to transparantly connect to serial
port.
* ser-termios.c: Big cleanup, use nicer coding conventions.
* ser-bsd.c: New module, serial stuff for BSD systems.
* serial.h: Define struct ttystate properly using HAVE_TERMIO.
* xm-apollo68b.h: #define PTRACE_IN_WRONG_PLACE...
Stu Grossman [Tue, 8 Sep 1992 22:46:08 +0000 (22:46 +0000)]
* a68v-xdep.c (store_inferior_registers): declare as void.
* infptrace.c: HP/Apollos have ptrace.h in the wrong place.
* remote-st2000.c: Massive changes to use new serial package.
Also added 'connect' command to transparantly connect to serial
port.
* ser-termios.c: Big cleanup, use nicer coding conventions.
* ser-bsd.c: New module, serial stuff for BSD systems.
* serial.h: Define struct ttystate properly using HAVE_TERMIO.
* xm-apollo68b.h: #define PTRACE_IN_WRONG_PLACE...
* doc/gdb.texinfo: fix shameful error of agreement reported by [email protected] (Jim Blandy)
* doc/gdb.texinfo: remove old partial discussion of remote serial
protocol (via serial debug stubs)
* doc/gdbinv-m.m4.in, doc/gdbinv-s.m4.in: new section discussing
use of serial debug stubs
Per Bothner [Fri, 4 Sep 1992 03:29:15 +0000 (03:29 +0000)]
* Makefile.in, Makefile.dos, generic.em, genscripts.sh,
gld960.em, h8300hms.em, h8300xray.em, lnk960.em, st2000.em,
vanilla.em: Rename all (generated) ld__*.c files to em_.c.
This is one character shorter, and lets people build on
SVR3 system. (ld__h8300xray.[co] was the killer there;
h8300xray.sc-sh is also overlong, but seems harmless.)
Based on a patch from Jonathan Ryshpan <hitachi!amito!jon>.
* Makefile.in (clean): Fix typo mostclean -> mostlyclean.
* configure.in: Add host isc.
Stu Grossman [Thu, 3 Sep 1992 16:26:03 +0000 (16:26 +0000)]
* a68v-xdep.c (store_inferior_registers): Define as type void.
* configure.in: Add host m68k-apollo*-bsd*.
* demangle.c (struct demanglers): Use enum instead of constant
value to keep braindamaged HP/Apollo compiler happy.
Per Bothner [Thu, 3 Sep 1992 05:03:47 +0000 (05:03 +0000)]
* utils.c (strcmp_iw): Add a hack to allow "FOO(ARGS)" to
match "FOO". This allows 'break Foo' to work when Foo is
a mangled C++ function. (See comment before function.)
John Gilmore [Thu, 3 Sep 1992 00:55:04 +0000 (00:55 +0000)]
* config/rs6000.mh (MH_CFLAGS): Circumvent IBM <rpc/rpc.h> bug,
for files in vx-share/*.c.
* xm-rs6000.h (fd_set): Circumvent the rs6000.mh circumvention,
for normal GDB source files.
John Gilmore [Wed, 2 Sep 1992 08:52:53 +0000 (08:52 +0000)]
* config/sun4os4.mh: Include ser-termios.o. FIXME, all .mh files
should include a ser-XXX.o module.
* configure.in: Map unrecognized sun 68k's, sun sparcs, into
known suns in configure.in, rather than mapping them to unique
config files that happen to duplicate other config files.
* config/sun3.{mh,mt}: Remove (use identical sun3os4.*).
* config/sun4.{mh,mt}: Remove (use identical sun4os4.*).
John Gilmore [Wed, 2 Sep 1992 08:51:17 +0000 (08:51 +0000)]
* ser-termios.c, ser-go32.c: Remove DEFUN crap, clean up.
* serial.h (EXFUN): Remove all uses, convert to PARAMS.
* config/sun4os4.mh: Include ser-termios.o. FIXME, all .mh files
should include a ser-XXX.o module.
* configure.in: Map unrecognized sun 68k's, sun sparcs, into
known suns in configure.in, rather than mapping them to unique
config files that happen to duplicate other config files.
* config/sun3.{mh,mt}: Remove (use identical sun3os4.*).
* config/sun4.{mh,mt}: Remove (use identical sun4os4.*).
John Gilmore [Wed, 2 Sep 1992 08:04:32 +0000 (08:04 +0000)]
* config/m68k-un.mt, config/m68k-noun.mt, config/sparc-un.mt,
config/sparc-noun.mt: New target configs for embedded.
* config/sun4os3.{mh,mt}: Remove, never existed in production.
John Gilmore [Wed, 2 Sep 1992 08:03:42 +0000 (08:03 +0000)]
* configure.in (*-*-sunos*): Use trailing * to match all
sub-variants of SunOS, e.g. sunos4* to match sunos4.1.1.
(sparc-*-sunos3): Remove host & target. Sunos3 never shipped
in production on Sun-4.
({a29k,i[34]86,i960}-*-elf): Add targets, equivalent to coff.
(m68k-*-{aout,coff,elf}): Add targets, w/new config and tm files.
(sparc-*-{aout,coff,elf}): Add targets, w/new config and tm files.
* tm-68k-un.h, tm-68k-noun.h, tm-spc-un.h, tm-spc-noun.h: New
target definitions for embedded with and without underlines on
identifiers. FIXME -- this ought to be known by BFD instead.
* tm-sparc.h, tm-sun2.h, tm-sun3.h: Delete NAMES_HAVE_UNDERSCORE:
not a parameter of the CPU, but of the development environment.
* tm-es1800.h, tm-sunos.h, tm-vx68.h: Add NAMES_HAVE_UNDERSCORE.
Per Bothner [Wed, 2 Sep 1992 06:45:13 +0000 (06:45 +0000)]
* ldmisc.c (xrealloc): New (needed by ../libiberty/cplus.dem.c).
* ldlex.l: Moved comment() to end, since some compilers
otherwise have problems with input() used before it is defined.
Per Bothner [Tue, 1 Sep 1992 20:42:11 +0000 (20:42 +0000)]
* targets.c (target_vector): Take out oasys (unless that is
the default): Because there is no magic number in archives,
there can be annoying target mis-matches.
* configure: added -program_transform_name option, used as
argument to sed when installing programs.
configure.texi: added documentation for -program_prefix,
-program_suffix and -program_transform_name.
Fred Fish [Mon, 31 Aug 1992 20:50:45 +0000 (20:50 +0000)]
* dwarfread.c (cu_language): New local variable to record
language for current compilation unit being processed.
* dwarfread.c (set_cu_language): New local function to decode
and record language for current compilation unit being processed.
* dwarfread.c (synthesize_typedef): Add local function to
synthesize a typedef for C++ classes, structs, unions, and
enumerations.
* dwarfread.c (read_structure_scope): Synthesize typedefs
for C++ classes, structs and unions.
* dwarfread.c (read_enumeration): Synthesize typedefs for
C++ enumerations.
* dwarfread.c (read_file_scope): Call set_cu_language to
record language for current compilation unit. After symtab
is built, save this recorded language.
* dwarfread.c (process_dies, add_partial_symbol, struct_type,
scan_partial_symbols, new_symbol): Recognize TAG_class_type.
* dwarfread.c (add_partial_symbol): Synthesize partial symbol
typedefs for C++ classes, structs, unions, and enumerations.
* dwarfread.c (scan_compilation_units): Call set_cu_language
to record language for current compilation unit.
* dwarfread.c (scan_partial_symbols): Call add_enum_psymbol here
for TAG_enumeration_types, rather than in add_partial_symbol.
* dwarfread.c (add_partial_symbol): Combine TAG_enumeration_type
case with class, struct, and union type cases, now that they are
the same. Remove tests for non-NULL name attributes, now done
by callers.
* gdbtypes.h (TYPE_CODE_CLASS): Add type for C++ classes, but
treat as alias for TYPE_CODE_STRUCT for now.
projects / binutils.git / log