Vladimir Prus [Tue, 22 Jan 2008 19:43:10 +0000 (19:43 +0000)]
* breakpoint.c (break_command_really): New parameter
ignore_count.
(break_command_1): Pass 0 as
ignore_count to break_command_really.
(gdb_breakpoint): Pass ignore_count to
break_command_really.
Kevin Buettner [Tue, 22 Jan 2008 01:17:25 +0000 (01:17 +0000)]
* mn10300-linux-tdep.c (am33_linux_sigframe_cache_init): Find
sigcontext struct via pointer.
(struct sigframe comment): Update to show new field `psc'.
Nick Hudson [Sat, 19 Jan 2008 15:03:50 +0000 (15:03 +0000)]
Add NetBSD/hppa target and host support.
* hppabsd-tdep.c (hppabsd_supply_gregset): Move to ...
(hppabsd_gregset): Move to ...
(hppabsd_regset_from_core_section): Rename
hppaobsd_regset_from_core_section and move to ...
(hppabsd_find_global_pointer): Update comment.
(hppabsd_init_abi): Make global. Do not register
hppabsd_regset_from_core_section.
(hppabsd_core_osabi_sniffer): Rename hppaobsd_core_osabi_sniffer and
move to ...
(_initialize_hppabsd_tdep): Move to ...
* hppaobsd-tdep.c: ... here. New file.
* hppnbsd-tdep.c: New file.
* hppnbsd-nat.c: New file.
* Makefile.in (ALL_TARGET_OBS): Add hppanbsd-tdep.o and hppaobsd-tdep.o.
(ALLDEPFILES): Add hppabsd-nat.c and hppabsd-tdep.c.
(hppabsd-nat.o, hppabsd-tdep.o): New dependencies.
(hppabsd-tdep.o, hppaobsd-tdep.o): Update dependencies.
* configure.host (hppa*-*-netbsd*): New entry.
* configure.tgt (hppa*-*-netbsd*): New entry.
(hppa*-*-openbsd*): Update.
* NEWS (New native configuration): Mention NetBSD/hppa.
(New targets): Mention NetBSD/hppa.
Eli Zaretskii [Sat, 19 Jan 2008 13:37:13 +0000 (13:37 +0000)]
* gdb.texinfo (Specify Location): New section.
(Delete Breaks, Edit, Set Breaks): Remove description of
locations. Instead, add a reference to "Specify Location".
(Machine Code, Jumping, Thread Stops, Continuing and Stepping)
(Symbols): Refer to "Specify Location" for the valid forms of
linespecs and locations.
Bob Wilson [Fri, 18 Jan 2008 19:13:48 +0000 (19:13 +0000)]
* config/tc-xtensa.c (xtensa_leb128): New function.
(md_pseudo_table): Use it for sleb128 and uleb128.
(is_leb128_expr): New internal flag.
(xtensa_symbol_new_hook): Check new flag.
* config/tc-avr.c (mcu_types): Change opcode set for avr3,
at90usb82, at90usb162.
* doc/c-avr.texi: Change architecture grouping for at90usb82,
at90usb162.
These changes support the new avr35 architecture group in gcc.
Markus Deuling [Wed, 16 Jan 2008 04:56:34 +0000 (04:56 +0000)]
* mn10300-tdep.h (AM33_MODE): Add gdbarch as parameter.
* mn10300-tdep.c (set_reg_offsets, mn10300_analyze_prologue): Use
get_frame_arch to get at the current_architecture. Update AM33_MODE
call.
(mn10300_analyze_prologue): Add gdbarch as parameter. Update caller.
(mn10300_frame_unwind_cache): Use get_frame_arch to get at the current
architecture.
(set_reg_offsets, mn10300_analyze_prologue): Fix indentation.
(amd64_native_gregset_reg_offset): Add gdbarch as parameter. Replace
current_gdbarch by gdbarch. Update caller.
* amd64-linux-nat.c (amd64_linux_fetch_inferior_registers)
(amd64_linux_store_inferior_registers): Use get_regcache_arch to get at
the current architecture. Update calls of
amd64_native_gregset_supplies_p.
* amd64bsd-nat.c (amd64bsd_fetch_inferior_registers)
(amd64bsd_store_inferior_registers): Likewise.
* i386-dis.c (Mx): New.
(PREFIX_0FC3): Likewise.
(PREFIX_0FC7_REG_6): Updated.
(dis386_twobyte): Use PREFIX_0FC3.
(prefix_table): Add PREFIX_0FC3. Use Mq on movntq and movntsd.
Use Mx on movntps, movntpd, movntdq and movntdqa. Use Md on
movntss.
Alan Modra [Tue, 15 Jan 2008 07:25:49 +0000 (07:25 +0000)]
bfd/
PR 5604
* elf-bfd.h (struct elf_backend_data): Add gc_keep. Remove param
names from others.
(_bfd_elf_gc_keep): Declare.
* elfxx-target.h (elf_backend_gc_keep): Define.
(elfNN_bed): Init new field.
* elflink.c (_bfd_elf_gc_keep): New function.
(bfd_elf_gc_sections): Call gc_keep.
* elf64-ppc.c (elf_backend_gc_keep): Define.
(struct _ppc64_elf_section_data): Move .opd related fields to
a struct so they don't occupy the same storage. Adjust accesses
throughout file.
(ppc64_elf_gc_keep): New function, split out from..
(ppc64_elf_gc_mark_hook): ..here. Don't call _bfd_elf_gc_mark
to mark .opd section, just set gc_mark.
(ppc64_elf_edit_opd): Remove no_opd_opt parm. Don't set opd->adjust
unless we are changing .opd. Test non-NULL opd->adjust at all
accesses throughout file.
* elf64-ppc.h (ppc64_elf_edit_opd): Update prototype.
ld/
PR 5604
* ldlang.c (lang_gc_sections): Move code to set SEC_KEEP on entry
syms to _bfd_elf_gc_keep.
* emultempl/ppc64elf.em (ppc_before_allocation): Don't call
ppc64_elf_edit_opd if no_opd_opt.
* config/tc-i386.c (match_reg_size): New.
(match_mem_size): Likewise.
(operand_size_match): Likewise.
(operand_type_match): Also clear all size fields.
(match_template): Skip Intel syntax when in AT&T syntax.
Call operand_size_match to check operand size.
(i386_att_operand): Set the mem field to 1 for memory
operand.
(i386_intel_operand): Likewise.
Nick Clifton [Mon, 14 Jan 2008 14:53:47 +0000 (14:53 +0000)]
(DEBUG_INFO_UNAVAILABLE): Value stored in num_debug_info_entries
when the .debug_info section could not be loaded/parsed.
(process_debug_info): Display the length of the compilation unit
in hex, so that it corresponds with the offsets that will follow.
Tell the user if the length was 32-bit or 64-bit.
If a DIE abbreviation could not be found, tell the user the offset
of the DIE.
(free_debug_memory): Do not attempt to free any entries in the
debug_information array if num_debug_info_entries is set to
DEBUG_INFO_UNAVAILABLE.
Nick Clifton [Mon, 14 Jan 2008 12:26:57 +0000 (12:26 +0000)]
* dwarf.c (process_debug_info): Include the CU offset and corrupt
version value when reporting unrecognised DWARF version numbers.
(load_debug_info): Remember a failed attempt to load and parse the
.debug_info section and do not repeat such attempts.
(display_debug_lines): Check the return value from load_debug_info
and return whilst displaying a warning message if the load failed.
(display_debug_loc): Likewise.
(display_debug_ranges): Likewise.
PR gas/5534
* i386-gen.c (operand_type_init): Add Dword to
OPERAND_TYPE_ACC32. Add Qword to OPERAND_TYPE_ACC64.
(opcode_modifiers): Remove CheckSize, Byte, Word, Dword,
Qword and Xmmword.
(operand_types): Add Byte, Word, Dword, Fword, Qword, Tbyte,
Xmmword, Unspecified and Anysize.
(set_bitfield): Make Mmword an alias of Qword. Make Oword
an alias of Xmmword.
Markus Deuling [Fri, 11 Jan 2008 14:43:15 +0000 (14:43 +0000)]
* alpha-tdep.c (alpha_heuristic_proc_start)
(alpha_sigtramp_register_address): Add gdbarch as parameter. Replace
current_gdbarch by gdbarch.
(alpha_heuristic_frame_unwind_cache): Use get_frame_arch to get at the
current architecture by frame_info. Update alpha_heuristic_proc_start
call.
(alpha_sigtramp_frame_this_id, alpha_sigtramp_frame_prev_register): Use
get_frame_arch to get at the current architecture by frame_info. Update
alpha_sigtramp_register_address call.
* arm-tdep.c (thumb_scan_prologue): Add gdbarch as parameter and replace
current_gdbarch by gdbarch. Update caller.
(convert_to_extended, convert_from_extended): Add endianess parameter
for comparison. Update caller.
(arm_extract_return_value, arm_store_return_value): Use
get_regcache_arch to get at the current architecture.
* cris-tdep.c (cris_register_size): Add gdbarch as parameter. Replace
current_gdbarch by gdbarch. Update caller.
(cris_gdb_func, move_to_preg_op, none_reg_mode_move_from_preg_op): Add
gdbarch as parameter. Update caller. Replace current_gdbarch by gdbarch.
* h8300-tdep.c (E_PSEUDO_CCR_REGNUM, E_PSEUDO_EXR_REGNUM, BINWORD): Add
gdbarch as parameter. Update caller.
(h8300_init_frame_cache): Add gdbarch as parameter. Replace
current_gdbarch by gdbarch. Update caller.
* hppa-tdep.c (skip_prologue_hard_way): Add gdbarch as parameter and
update caller. Replace current_gdbarch by gdbarch.
* m32c-tdep.c (m32c_skip_trampoline_code): Use get_frame_arch to get at
the current architecture. Replace current_gdbarch by gdbarch.
* m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise.
(STACK_CORRECTION, USE_PAGE_REGISTER): Replace M6811_TDEP by its
expression. Add gdbarch as parameter and replace current_gdbarch with
it. Update caller.
(M6811_TDEP): Remove.
(m68hc11_frame_prev_register): Use get_frame_arch to get at the current
architecture.
(m68hc11_scan_prologue): Add gdbarch as parameter. Replace
current_gdbarch by gdbarch. Update caller.
* m68k-tdep.c (m68k_analyze_prologue): Add gdbarch as parameter and
update caller.
(m68k_analyze_register_saves): Likewise. Also replace current_gdbarch
by gdbarch.
* rs6000-tdep.c (skip_prologue): Add gdbarch as parameter and update
caller. Relace current_gdbarch by gdbarch.
(altivec_register_p, spe_register_p): Likewise.
* ppc-tdep.h (altivec_register_p, spe_register_p): Add gdbarch as
parameter.
* ppc-linux-nat.c (fetch_register, store_register): Update caller of
altivec_register_p and spe_register_p.
* score-tdep.c (score_fetch_inst): Add gdbarch as parameter. Update
caller. Replace current_gdbarch by gdbarch.
(score_analyze_prologue): use get_frame_arch to get at the current
architecture.
* sparc-tdep.h (sparc_analyze_prologue): Add gdbarch as parameter.
* sparc-tdep.c (sparc_analyze_prologue): Likewise. Replace
current_gdbarch by gdbarch. Update caller.
(sparc_frame_cache): Use get_frame_arch to get at the current
architecture.
* sparce64-tdep.c (sparc64_skip_prologue): Update call of
sparc_analyze_prologue.
* mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Add gdbarch as
parameter.
Markus Deuling [Fri, 11 Jan 2008 13:34:15 +0000 (13:34 +0000)]
* exec.c: #include "arch-utils.h"
(print_section_info): Use gdbarch_from_bfd to get at the
current architecture. Replace current_gdbarch. Fix indention.
Replace deprecated_print_address_numeric by paddress.
* Makefile.in (exec.o) Add dependency to arch-utils.h.
* ldlang.c (lang_end): Warns if the entry point is not found when
--gc-sections.
Emit an error if no root is specified when --gc-sections -r.
* ld.texinfo (Options): Document that --gc-sections is compatible
with -r and -q.
* ldmain.c (main): Do not error out if -r and --gc-sections.
* scripttempl/elf.sc: Emit ENTRY command only if relocating.
* lib/ld-lib.exp (check_gc_sections_available): Now available on
VxWorks.
* ld-gc: New directory for testing --gc-sections.
* ld-gc/gc.c: New file.
* ld-gc/gc.exp: New file.
* ld-gc/noent.s: New file.
* ld-gc/noent.d: New file.
* i386-dis.c (REG_0F0E): Renamed to REG_0F0D.
(REG_0F18): Updated.
(reg_table): Updated.
(dis386_twobyte): Updated. Use "nopQ" on 0x19 to 0x1e.
(twobyte_has_modrm): Set 1 for 0x19 to 0x1e.
Bob Wilson [Wed, 9 Jan 2008 17:30:59 +0000 (17:30 +0000)]
gas/
* dwarf2dbg.c (out_sleb128): Delete.
(size_fixed_inc_line_addr, emit_fixed_inc_line_addr): New.
(out_fixed_inc_line_addr): Delete.
(relax_inc_line_addr, dwarf2dbg_estimate_size_before_relax): Call new
size_fixed_inc_line_addr if DWARF2_USE_FIXED_ADVANCE_PC is set.
(dwarf2dbg_convert_frag): Likewise for emit_fixed_inc_line_addr.
(process_entries): Remove calls to out_fixed_inc_line_addr. When
DWARF2_USE_FIXED_ADVANCE_PC is set, call relax_inc_line_addr.
* read.h (emit_expr_fix): New prototype.
* read.c (emit_expr): Move code to emit_expr_fix and use it here.
(emit_expr_fix): New.
testsuite/
* gas/lns/lns.exp: Run new lns-big-delta test for targets that set
DWARF2_USE_FIXED_ADVANCE_PC.
* gas/lns/lns-big-delta.s: New.
* gas/lns/lns-big-delta.d: New.